smartctl -a /dev/hda
戻る
<![CDATA[
2008年2月2日,修好后的检查结果
------------------------------------------------------------------------------
smartctl version 5.37 [i686-mingw32-xp-sp2] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE (Serial ATA) family
Device Model: WDC WD2500JS-19NCB1
Serial Number: WD-WCANKJ096215
Firmware Version: 10.02E01
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Feb 02 17:15:46 2008
SMART support is: Available - device has SMART capability.
Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (8280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 96) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 185 185 021 Pre-fail Always - 5725
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 12
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 253 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6
10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10
190 Temperature_Celsius 0x0022 064 039 000 Old_age Always - 36
194 Temperature_Celsius 0x0022 114 089 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
2008年1月26日12点,送去修理前最后的检查结果
------------------------------------------------------------------------------
smartctl version 5.37 [i686-mingw32-xp-sp2] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE (Serial ATA) family
Device Model: WDC WD2500JD-19HBB0
Serial Number: WD-WCAL74033754
Firmware Version: 08.02D08
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Jan 26 12:09:45 2008
SMART support is: Available - device has SMART capability.
Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (7275) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 91) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 035 001 051 Pre-fail Always FAILING_NOW 935
3 Spin_Up_Time 0x0007 118 113 021 Pre-fail Always - 6600
4 Start_Stop_Count 0x0032 098 098 040 Old_age Always - 2896
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7565
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2856
194 Temperature_Celsius 0x0022 113 081 000 Old_age Always - 37
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 5510 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5510 occurred at disk power-on lifetime: 7565 hours (315 days + 5 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:38:39.250 READ DMA EXT
35 00 30 67 d9 00 00 00 00:38:39.250 WRITE DMA EXT
ea 00 00 00 00 00 00 00 00:38:39.250 FLUSH CACHE EXIT
35 00 80 57 3f b0 04 00 00:38:39.250 WRITE DMA EXT
35 00 80 d7 3e b0 04 00 00:38:39.250 WRITE DMA EXT
Error 5509 occurred at disk power-on lifetime: 7565 hours (315 days + 5 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:38:37.050 READ DMA EXT
35 00 08 67 34 60 00 00 00:38:37.050 WRITE DMA EXT
25 00 01 00 00 00 00 00 00:38:37.050 READ DMA EXT
35 00 08 df 00 00 00 00 00:38:37.050 WRITE DMA EXT
35 00 07 97 85 a0 00 00 00:38:37.050 WRITE DMA EXT
Error 5508 occurred at disk power-on lifetime: 7565 hours (315 days + 5 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:38:34.950 READ DMA EXT
35 00 80 4f d8 00 00 00 00:38:34.950 WRITE DMA EXT
35 00 80 57 39 b0 04 00 00:38:34.950 WRITE DMA EXT
35 00 80 d7 38 b0 04 00 00:38:34.950 WRITE DMA EXT
35 00 80 57 38 b0 04 00 00:38:34.950 WRITE DMA EXT
Error 5507 occurred at disk power-on lifetime: 7565 hours (315 days + 5 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:38:32.850 READ DMA EXT
35 00 04 c7 19 b1 01 00 00:38:32.850 WRITE DMA EXT
35 00 20 ef a7 b0 01 00 00:38:32.850 WRITE DMA EXT
35 00 08 ef 77 74 01 00 00:38:32.850 WRITE DMA EXT
35 00 08 cf 00 00 00 00 00:38:32.850 WRITE DMA EXT
Error 5506 occurred at disk power-on lifetime: 7565 hours (315 days + 5 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:37:44.400 READ DMA EXT
35 00 04 b7 84 19 00 00 00:37:44.400 WRITE DMA EXT
35 00 18 17 d0 00 00 00 00:37:44.400 WRITE DMA EXT
35 00 03 70 4a 4a 1a 00 00:37:44.400 WRITE DMA EXT
35 00 10 ff cf 43 1a 00 00:37:44.400 WRITE DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
2008年1月25日晚12点
------------------------------------------------------------------------------
smartctl version 5.37 [i686-mingw32-xp-sp2] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE (Serial ATA) family
Device Model: WDC WD2500JD-19HBB0
Serial Number: WD-WCAL74033754
Firmware Version: 08.02D08
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Jan 25 23:37:53 2008
SMART support is: Available - device has SMART capability.
Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (7275) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 91) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 038 001 051 Pre-fail Always FAILING_NOW 973
3 Spin_Up_Time 0x0007 120 113 021 Pre-fail Always - 6533
4 Start_Stop_Count 0x0032 098 098 040 Old_age Always - 2895
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7564
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2855
194 Temperature_Celsius 0x0022 099 081 000 Old_age Always - 51
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 5159 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5159 occurred at disk power-on lifetime: 7564 hours (315 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:04:27.500 READ DMA EXT
35 00 68 b7 51 00 00 00 00:04:27.500 WRITE DMA EXT
25 00 01 00 00 00 00 00 00:04:27.500 READ DMA EXT
25 00 40 77 5d 4d 1a 00 00:04:27.500 READ DMA EXT
25 00 80 7f a9 72 01 00 00:04:27.500 READ DMA EXT
Error 5158 occurred at disk power-on lifetime: 7564 hours (315 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:04:25.400 READ DMA EXT
35 00 80 37 51 00 00 00 00:04:25.400 WRITE DMA EXT
25 00 01 00 00 00 00 00 00:04:25.400 READ DMA EXT
25 00 40 cf 5c 4d 1a 00 00:04:25.400 READ DMA EXT
25 00 80 ff a8 72 01 00 00:04:25.400 READ DMA EXT
Error 5157 occurred at disk power-on lifetime: 7564 hours (315 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:04:23.300 READ DMA EXT
35 00 80 b7 50 00 00 00 00:04:23.300 WRITE DMA EXT
35 00 08 4f 7a 5e 1a 00 00:04:23.300 WRITE DMA EXT
25 00 39 27 5c 4d 1a 00 00:04:23.300 READ DMA EXT
35 00 08 47 8f 40 1a 00 00:04:23.300 WRITE DMA EXT
Error 5156 occurred at disk power-on lifetime: 7564 hours (315 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:04:21.200 READ DMA EXT
25 00 40 4f 5b 4d 1a 00 00:04:21.200 READ DMA EXT
25 00 80 ff a7 72 01 00 00:04:21.200 READ DMA EXT
25 00 39 37 53 4d 1a 00 00:04:21.200 READ DMA EXT
25 00 70 8f a7 72 01 00 00:04:21.200 READ DMA EXT
Error 5155 occurred at disk power-on lifetime: 7564 hours (315 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:04:11.350 READ DMA EXT
35 00 80 3f 48 00 00 00 00:04:11.350 WRITE DMA EXT
25 00 01 00 00 00 00 00 00:04:11.350 READ DMA EXT
35 00 08 87 27 5f 1a 00 00:04:11.350 WRITE DMA EXT
25 00 40 d1 6e 4c 1a 00 00:04:11.350 READ DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
2008年1月25日の結果,注意！
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 049 001 051 Pre-fail Always FAILING_NOW 861
------------------------------------------------------------------------------
smartctl version 5.37 [i686-mingw32-xp-sp2] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE (Serial ATA) family
Device Model: WDC WD2500JD-19HBB0
Serial Number: WD-WCAL74033754
Firmware Version: 08.02D08
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Jan 25 21:52:30 2008
SMART support is: Available - device has SMART capability.
Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (7275) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 91) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 049 001 051 Pre-fail Always FAILING_NOW 861
3 Spin_Up_Time 0x0007 118 113 021 Pre-fail Always - 6633
4 Start_Stop_Count 0x0032 098 098 040 Old_age Always - 2894
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7562
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2854
194 Temperature_Celsius 0x0022 120 081 000 Old_age Always - 30
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 4985 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4985 occurred at disk power-on lifetime: 7562 hours (315 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:23:10.950 READ DMA EXT
35 00 30 77 aa 01 00 00 00:23:10.950 WRITE DMA EXT
ea 00 00 00 00 00 00 00 00:23:10.950 FLUSH CACHE EXIT
35 00 02 9f 8d 54 0f 00 00:23:10.950 WRITE DMA EXT
35 00 03 37 2b b5 0e 00 00:23:10.950 WRITE DMA EXT
Error 4984 occurred at disk power-on lifetime: 7562 hours (315 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:23:08.700 READ DMA EXT
35 00 08 f7 b0 65 00 00 00:23:08.700 WRITE DMA EXT
35 00 08 d7 00 00 00 00 00:23:08.700 WRITE DMA EXT
35 00 08 77 78 65 00 00 00:23:08.700 WRITE DMA EXT
35 00 10 67 aa 01 00 00 00:23:08.700 WRITE DMA EXT
Error 4983 occurred at disk power-on lifetime: 7562 hours (315 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:23:06.550 READ DMA EXT
35 00 28 87 a9 01 00 00 00:23:06.550 WRITE DMA EXT
25 00 01 00 00 00 00 00 00:23:06.550 READ DMA EXT
35 00 02 9f 8d 54 0f 00 00:23:06.550 WRITE DMA EXT
35 00 08 b7 8c 54 0f 00 00:23:06.550 WRITE DMA EXT
Error 4982 occurred at disk power-on lifetime: 7562 hours (315 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:23:04.500 READ DMA EXT
35 00 02 af 6e 54 0f 00 00:23:04.500 WRITE DMA EXT
35 00 03 37 36 b5 0e 00 00:23:04.500 WRITE DMA EXT
35 00 08 d7 00 00 00 00 00:23:04.500 WRITE DMA EXT
35 00 06 8f 2f b5 0e 00 00:23:04.500 WRITE DMA EXT
Error 4981 occurred at disk power-on lifetime: 7562 hours (315 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 00:22:34.550 READ DMA EXT
35 00 04 a7 59 19 00 00 00:22:34.550 WRITE DMA EXT
35 00 08 cf 00 00 00 00 00:22:34.550 WRITE DMA EXT
25 00 01 00 00 00 00 00 00:22:34.550 READ DMA EXT
35 00 08 df 00 00 00 00 00:22:34.550 WRITE DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
2008年1月19日の結果
------------------------------------------------------------------------------
smartctl version 5.37 [i686-mingw32-xp-sp2] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE (Serial ATA) family
Device Model: WDC WD2500JD-19HBB0
Serial Number: WD-WCAL74033754
Firmware Version: 08.02D08
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Jan 19 12:27:22 2008
SMART support is: Available - device has SMART capability.
Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (7275) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 91) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 104 001 051 Pre-fail Always In_the_past 502
3 Spin_Up_Time 0x0007 115 113 021 Pre-fail Always - 6783
4 Start_Stop_Count 0x0032 098 098 040 Old_age Always - 2870
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7520
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2830
194 Temperature_Celsius 0x0022 111 081 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1726 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1726 occurred at disk power-on lifetime: 7520 hours (313 days + 8 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 02:43:17.900 READ DMA EXT
35 00 08 d7 00 00 00 00 02:43:17.900 WRITE DMA EXT
25 00 01 00 00 00 00 00 02:43:17.900 READ DMA EXT
35 00 18 6f 39 01 00 00 02:43:17.900 WRITE DMA EXT
35 00 08 7f cc 60 00 00 02:43:17.900 WRITE DMA EXT
Error 1725 occurred at disk power-on lifetime: 7520 hours (313 days + 8 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 02:43:15.650 READ DMA EXT
35 00 28 f7 aa 01 00 00 02:43:15.650 WRITE DMA EXT
35 00 08 f7 db 01 00 00 02:43:15.650 WRITE DMA EXT
35 00 08 7f d8 01 00 00 02:43:15.650 WRITE DMA EXT
35 00 08 47 af 01 00 00 02:43:15.650 WRITE DMA EXT
Error 1724 occurred at disk power-on lifetime: 7520 hours (313 days + 8 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 02:43:13.600 READ DMA EXT
35 00 08 47 ab 01 00 00 02:43:13.600 WRITE DMA EXT
35 00 80 3f 38 01 00 00 02:43:13.600 WRITE DMA EXT
35 00 08 4f a9 57 15 00 02:43:13.600 WRITE DMA EXT
25 00 08 3f 35 60 00 00 02:43:13.600 READ DMA EXT
Error 1723 occurred at disk power-on lifetime: 7520 hours (313 days + 8 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 02:43:11.600 READ DMA EXT
35 00 08 c7 00 00 00 00 02:43:11.600 WRITE DMA EXT
35 00 60 df 37 01 00 00 02:43:11.600 WRITE DMA EXT
35 00 80 5f 37 01 00 00 02:43:11.600 WRITE DMA EXT
35 00 80 df 36 01 00 00 02:43:11.600 WRITE DMA EXT
Error 1722 occurred at disk power-on lifetime: 7520 hours (313 days + 8 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 40 35 60 e0 Error: UNC 8 sectors at LBA = 0x00603540 = 6305088
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 35 60 00 00 02:36:08.750 READ DMA EXT
35 00 08 d7 00 00 00 00 02:36:08.750 WRITE DMA EXT
35 00 04 ff 69 5f 15 00 02:36:08.750 WRITE DMA EXT
25 00 08 2f 4a a9 04 00 02:36:08.750 READ DMA EXT
35 00 03 77 09 a2 00 00 02:36:08.750 WRITE DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
]]>
戻る