| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI/ASTM A753-1997
| 镍铁软磁合金规范
| Specification for Nickel-Iron Soft Magnetic Alloys
|
| ANSI/ASTM B407-1996
| 镍铁铬合金无缝管规范
| Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
|
| ANSI/ASTM B408-1996
| 镍铁铬合金杆材和棒材规范
| Specification for Nickel-Iron-Chromium Alloy Rod and Bar
|
| ANSI/ASTM B409-1996
| 镍铁铬合金板材、薄板材和带材规范
| Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
|
| ANSI/ASTM B423-1999
| 镍铁铬钼铜合金(UNS N08825 and UNS N08221)无缝管规范
| Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and UNS N08221) Seamless Pipe and Tube
|
| ANSI/ASTM B424-1998
| 镍铁铬钼铜合金(UNS N08825 and N08221)板、薄板及带材规范
| Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Plate, Sheet, and Strip
|
| ANSI/ASTM B425-1999
| 镍铁铬钼铜合金(UNS N08825 and UNS N08221)杆材和棒材规范
| Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Rod and Bar
|
| ANSI/ASTM B514-1996
| 镍铁铬合金焊管规范
| Specification for Welded Nickel-Iron-Chromium Alloy Pipe
|
| ANSI/ASTM B535-1999
| 镍铁铬硅合金(UNS N08330 and UNS N08332)无缝管规范
| Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and UNS N08332) Seamless Pipe
|
| ANSI/ASTM B536-1996
| 镍铁铬硅合金板材、薄板材及带材规范
| Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
|
| ANSI/ASTM B546-1998
| 电熔焊接镍铬钶钼合金(UNS N06617)、镍铁铬硅合金(UNS N08330 and UNS N08332)、 镍铬铁合金(UNS N06025)和
| Specification for Electric-Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
|
| ANSI/ASTM B621-1996
| 镍铁铬钼合金(UNS N08320)棒材规范
| Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
|
| ANSI/ASTM B649-1996
| 镍铁铬钼铜低碳合金(UNS N08904)、镍铁铬钼铜氮低碳合金(UNS N08925,UNS N08031和UNS N08926)和铬镍铁氮低
| Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904) and Ni-Fe-Cr-Mo-Cu-N Low Carbon Alloys (UNS 08925, UNS N08031, and UNS N08925) Cr-Ni-Fe-N Low Carbon (UNS R20033)
|
| ANSI/ASTM B672-1996
| 稳定的镍铁铬钼铌合金棒材及线材规范
| Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
|
| ANSI/ASTM B690-1996
| 铁镍铬钼合金(UNS N08366 and UNS No8367)无缝管规范
| Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS No8367) Seamless Pipe and Tube
|
| ANSI/ASTM B691-1996
| 铁镍铬钼合金(UNS N08366 And UNS N08367)条材、棒材及线材规范
| Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 And UNS N08367) Rod, Bar, and Wire
|
| ANSI/ASTM B709-1998
| 铁镍铬钼合金(UNS No8028)板材、薄板和带材
| Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS No8028) Plate, Sheet, and Strip
|
| ANSI/ASTM B710-1999
| 镍铁铬硅合金焊接管规范
| Specification for Nickel-Iron-Chromium Silicon-Alloy Welded Pipe
|
| ANSI/ASTM B78-2001
| 铁镍铝合金电加热加速寿命试验方法
| Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
|
| ANSI/ASTM B834-1996
| 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件规范
| Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts
|
| ANSI/ASTM B872-1996
| 沉淀硬化镍铁铬钴(Nb)钛铝合金(UNS N09908)板、薄板及带材规范
| Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (NB)-Titanium-Aluminum Alloy (UNS NO9908) Plate, Sheet and Strip
|
| ASTM A 753-2002
| 煅制镍铁软磁合金标准规范
| Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
|
| ASTM B 407-2004
| 镍铁铬合金无缝管的标准规范
| Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
|
| ASTM B 408-1996
| 镍铁铬合金杆材棒材标准规范
| Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
|
| ASTM B 409-2001
| 镍铁铬合金板、薄板和带材标准规范
| Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
|
| ASTM B 423-2005
| 镍铁铬钼铜合金无缝管道标准规范(UNS N08825 and N08221)
| Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
|
| ASTM B 424-2005
| 镍铁铬钼铜合金(UNS N08825和UNS N08221)板材、薄板及带材的标准规范
| Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
|
| ASTM B 425-1999
| 镍铁铬钼铜合金(UNS N08825和UNS N08221)杆材和棒材标准规范
| Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
|
| ASTM B 511-2001
| 镍铁铬硅合金棒和型材标准规范
| Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
|
| ASTM B 514-2005
| 焊接的镍铁铬合金管标准规范
| Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
|
| ASTM B 535-2004
| 镍铁铬硅合金无缝管标准规范
| Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
|
| ASTM B 536-1995
| 镍铁铬硅合金板、薄板及带材标准规范
| Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
|
| ASTM B 546-2004
| 电熔焊接镍铬钴钼合金(UNS N06617)、镍铁铬硅合金(UNS N08330和UNS N08332)、镍铬铁铝合金(UNS N06603)、镍
| Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
|
| ASTM B 591-2004
| 铜锌锡和铜锌锡铁镍合金板、薄板、带材及轧制的棒材标准规范
| Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
|
| ASTM B 599-1992
| 镍铁铬钼钶稳定合金板、薄板及带材标准规范
| Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
|
| ASTM B 620-2003
| 镍铁铬钼合金板、薄板及带材标准规范
| Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
|
| ASTM B 621-2002
| 镍铁铬钼合金棒材标准规范
| Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
|
| ASTM B 672-2002
| 镍铁铬钼铌稳定合金(UNS N08700)棒材及线材的标准规范
| Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
|
| ASTM B 690-2002
| 铁镍铬钼合金无缝管标准规范
| Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
|
| ASTM B 691-2002
| 铁镍铬钼合金杆材、棒材及线材标准规范
| Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
|
| ASTM B 709-2004
| 铁镍铬钼合金板、薄板和带材标准规范
| Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
|
| ASTM B 710-2004
| 镍铁铬硅合金焊接管标准规范
| Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
|
| ASTM B 834-1995
| 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件标准规范
| Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
|
| ASTM B 872-1996
| 沉淀硬化镍铁铬钴(Nb)钛铝合金(UNS N09908)板、薄板及带材的标准规范
| Standard Specification for Precipitation-Hardening Nickel-Iron-Chromium- Columbium (Nb)-Titanium-Aluminum Alloy (UNS N09908) Plate, Sheet, and Strip
|
| ASTM E 1033-1998
| 在居里温度以上的F型连续焊接亚锰铁管的电磁(涡流)检验
| Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature
|
| ASTM E 1312-1999
| 居里温度以上铁磁圆柱棒产品的电磁(涡流)检验
| Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
|
| ASTM E 1917-2002
| 用双氧钒磷钼酸盐分子吸收光谱测定法测定镍、镍铁和镍合金中磷含量的标准试验方法
| Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method
|
| ASTM E 353-1993
| 不锈钢、耐热钢、马氏体钢和其它类似的铬镍铁合金化学分析的标准试验方法
| Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
|
| ASTM E 963-1995
| 用盐酸甲烷电解质从镍和镍铁积超热合金中进行相位的电解提取
| Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
|
| ASTM F 1466-1999
| 金属与陶瓷密封用铁镍钴合金的标准规范
| Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
|
| ASTM F 30-1996
| 铁镍密封合金标准规范
| Standard Specification for Iron-Nickel Sealing Alloys
|
| ASTM G 61-1986
| 铁镍钴基合金的局部腐蚀敏感性的循环动电势极化强度的试验方法
| Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
|
| BS 2857-1976
| 镍铁制变压器与扼流圈叠片规范
| Specification for nickel-iron transformer and choke laminations
|
| BS 6783-1-1986
| 镍、镍铁和镍合金的取样与分析.第1部分:采用火焰原子吸收光谱法对镍中银、铋、镉、钴、铜、铁、锰、铅和锌
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silver, bismuth, cadmium, cobalt, copper , iron, manganese, lead and zinc in nickel by flame atomic absorption spectrometry
|
| BS 6783-10-1990
| 镍、镍铁和镍合金的取样与分析.第10部分:镍合金中铁含量的测定方法(重铬酸钾滴定法)
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of iron in nickel alloys (titrimetric method using potassium dichromate)
|
| BS 6783-11-1990
| 镍、镍铁和镍合金的取样与分析.第11部分:镍合金钴含量的测定方法(六氰基高铁酸钠电位滴定法)
| Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of cobalt in nickel alloys (potentiometric titration method using potassium hexacyanoferrate (III))
|
| BS 6783-12-1992
| 镍、镍铁和镍合金的取样与分析.第12部分:利用钼蓝分子吸收光谱测定法测定镍合金中磷的方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of phosphorus in nickel alloys by molybdenum blue molecular absorption spectrometry
|
| BS 6783-13-1992
| 镍、镍铁和镍合金的取样与分析.第13部分:用磷钒钼分子吸收光谱法对镍、镍铁和镍合金中磷的测定方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of phosphorus in nickel, ferronickel and nickel alloys by phosphovanadomolybdate molecular absorption spectrometry
|
| BS 6783-14-1994
| 镍、镍铁和镍合金取样和分析.采用姜黄分子吸收光谱法对镍和镍合金中硼总含量的测定方法.
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of total boron content of nickel, and nickel alloys by curcumin molecular absorption spectrometry
|
| BS 6783-15-1994
| 镍.镍铁和镍合金的取样和分析.采用二安替比林基低甲烷分子吸收光谱法对镍合金中的钛合金含量的测定方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of titanium in nickel alloys by diantipyrylmethane molecular absorption spectrometry
|
| BS 6783-2-1986
| 镍、镍铁和镍的合金取样与分析.第2部分:镍铁中镍的测定方法(丁二酮酚重力分析法)
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of nickel in ferronickel (dimethylglyoxime gravimetric method)
|
| BS 6783-3-1986
| 镍、镍铁和镍合金的取样与分析.第3部分:采用火焰原子吸收光谱法镍铁中钴的测定方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of cobalt in ferronickel by flame atomic absorption spectrometry
|
| BS 6783-4-1986
| 镍、镍铁和镍合金的取样与分析.第4部分:用电热原子吸收光谱测定法测定银、砷、铋、镉、铅、锑、硒、锡、碲
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium in nickel by electrothermal atomic absorption spectrometry
|
| BS 6783-5-1986
| 镍、镍铁和镍合金的取样与分析.第5部分:感应电炉燃烧后用红外吸收法测定镍、镍铁和镍合金中碳的方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of carbon in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
|
| BS 6783-6-1986
| 镍、镍铁和镍合金的取样与分析.第6部分:硫化氢产生后用甲蓝分子吸收光谱测定法测定镍中硫的方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel by methylene blue molecular absorption spectrometry after generation of hydrogen sulphide
|
| BS 6783-7-1986
| 镍、镍铁和镍合金的取样与分析.第7部分:感应电炉燃烧后用红外测定镍镍铁和镍合金中硫的方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
|
| BS 6783-8-1986
| 镍、镍铁和镍合金的取样与分析.第8部分:感应电炉燃烧后用碘滴定法测定镍、镍铁和镍合金中硫的方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel, ferronickel and nickel alloys by iodimetric titration after induction furnace combustion
|
| BS 6783-9-1986
| 镍、镍铁和镍合金的取样与分析.第9部分:镍铁中硅的测定方法(重力分析法)
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silicon in ferronickel (gravimetric method)
|
| BS EN 2583-1997
| 耐热镍基合金NI-PH2601(铬镍铁合金718)MJ螺纹螺栓.等级:1275MPa(室温)/650℃.技术规范
| Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C - Technical specification
|
| BS EN 26501-1992
| 铁镍合金.规范和交货要求
| Ferronickel - Specification and delivery requirements |
| BS EN 28049-1992
| 镍铁弹丸.抽样分析
| Ferronickel shot - Sampling for analysis
|
| BS EN 28050-1992
| 镍铁块或片.抽样分析
| Ferronickel ingots or pieces - Sampling for analysis
|
| BS EN 2927-1996
| NI-P100HT(铬镍铁合金 718)耐热镍基合金长螺纹减荷螺杆双六角头螺栓.等级:1275MPa(室温)/650℃
| Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C
|
| BS EN 2928-1996
| 镀银的NI-P100HT(铬镍铁合金 718)耐热镍基合金长螺纹减荷螺杆的双六角头螺栓.等级:1275MPa(室温)/650℃
| Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C
|
| BS EN 2933-1996
| NI-P100HT(铬镍铁合金 718)耐热镍基合金长螺纹减荷螺杆的T型头螺栓.等级:1275MPa(室温)/650℃
| Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C
|
| BS EN 2934-1996
| 镀银的NI-P100HT(铬镍铁合金 718)耐热镍基合金长螺纹减荷螺杆的T型头螺栓.等级:1275MPa(室温)/650℃
| Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification:1275 MPa (at ambient temperature)/650 °C
|
| BS EN 3008-1998
| 耐热镍基合金NI-P100HT(铬镍铁合金718)制薄柄长螺纹六角头螺栓.等级:1275 MPa(室温)/650℃
| Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C
|
| BS EN 3009-1998
| 镀银耐热镍基合金NI-P100HT(铬镍铁合金718)制薄柄长螺纹六角头螺栓.等级:1275 MPa(室温)/650℃
| Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification - 1275 MPa (at ambient temperature)/650 °C
|
| BS EN 3297-1998
| 薄壁、自锁紧、耐热镍基合金NI-P100HT(铬镍铁合金718)、MJ螺纹嵌镶件.技术规范
| Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification
|
| BS EN 3832-2005
| 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制长螺纹、细杆、十二角螺栓.等级:1550MPa(室温)/650℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature) / 650 °C
|
| BS EN 3833-2005
| 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制MJ螺纹螺栓.等级:1550MPa(室温)/650℃.技术规范
| Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature) / 650 °C - Technical specification
|
| BS EN 4009-2005
| 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制中长螺纹、紧公差柄、十二角头螺栓.等级:1550MPa(室
| Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)
|
| BS EN 4011-2005
| 航空航天系列.十二角头自锁紧的镀银耐热镍基合金NI-PH2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/600 鳦
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C
|
| BS EN 4012-2004
| 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制MoS2涂覆的自锁紧双六角头螺母.等级:1550MPa(室温)/4
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C
|
| BS EN 4013-2005
| 航空航天系列.自锁紧镀银耐热镍基合金NI-PH2601(铬镍铁合金718)制带柄螺母.等级:1550MPa(室温)/600 鳦
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4047-2004
| 航空航天系列.自锁紧MJ螺纹镀银耐热镍基合金NI-PH2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/600 鳦.技术
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550MPa (at ambient temperature)/600 °C - Technical specification
|
| BS EN 4048-2004
| 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制MoS2涂覆的自锁、带MJ螺纹的螺母.等级:1550MPa(室温)
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C - Technical specification
|
| BS EN 4117-2004
| 航空航天系列.十二角头自锁紧螺纹镀银的耐热镍基合金NI-PH 2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/60
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4123-2004
| 航空航天系列.自锁紧螺纹镀银的耐热镍基合金NI-PH 2601(铬镍铁合金718)带柄螺母.等级:1550MPa(室温)/600 鳦
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4321-2004
| 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金 718)制的带安全锁线孔、细杆、长螺纹、镀银的双六角头螺栓
| Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification - 1 550 Mpa (at ambient temperature)/650 °C
|
| BS EN 4352-2004
| 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金 718)制带安全锁线孔、细杆、长螺纹、镀MoS2 的双六角头螺
| Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C
|
| BS ISO 11438-1-1994
| 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第1部分:一般要求和试样溶解
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - General requirements and sample dissolution
|
| BS ISO 11438-2-1994
| 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第2部分: 铅含量测定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of lead content
|
| BS ISO 11438-3-1994
| 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第3部分: 锑含量测定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of antimony content
|
| BS ISO 11438-4-1994
| 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第4部分: 锡含量测定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of tin content
|
| BS ISO 11438-5-1994
| 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第5部分:碲含量测定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of tellurium content
|
| BS ISO 11438-6-1994
| 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第6部分:铊含量测定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of thallium content
|
| BS ISO 11438-7-1994
| 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.第7部分:银含量测定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of silver content
|
| BS ISO 11438-8-1994
| 镍铁合金.采用电热原子吸收光谱测定法对微量元素含量的测定.铟含量的测定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of indium content
|
| DIN 17745-2002
| 镍铁精制合金.化学成分
| Wrought alloys of nickel and iron - Chemical composition
|
| DIN EN 26352-1992
| 镍铁.镍含量的测定.丁二酮肟重量分析法(ISO 6352-85)
| Ferronickel; determination of nickel content; dimethylglyoxime gravimetric method (ISO 6352:1985); german version EN 26352:1991
|
| DIN EN 26501-1992
| 镍铁.规范和交付要求
| Ferronickel; specification and delivery requirements (ISO 6501:1988); german version EN 26501:1992
|
| DIN EN 27520-1992
| 镍铁.钴含量的测定.火焰原子吸收光谱测定法(ISO 7520-85)
| Ferronickel; determination of cobalt content; flame atomic absorption spectrometric method (ISO 7520:1985); german version EN 27520:1991
|
| DIN EN 27526-1992
| 镍.镍铁.镍合金.硫含量的测定.感应电炉燃烧后红外线吸收法(ISO 7526-1985)
| Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985); german version EN 27526:1991
|
| DIN EN 27527-1992
| 镍.镍铁.镍合金.硫含量的测定.感应电炉燃烧后碘滴定分析法(ISO 7527-1985)
| Nickel, ferronickel and nickel alloys; determination of sulfur content; iodimetric titration method after induction furnace combustion (ISO 7527:1985); german version EN 27527:1991
|
| DIN EN 28049-1992
| 镍铁细粒.分析取样
| Ferronickel shot; sampling for analysis (ISO 8049:1988); german version EN 28049:1992
|
| DIN EN 28050-1992
| 镍铁锭和镍铁块.分析取样
| Ferronickel ingots or pieces; sampling for analysis (ISO 8050:1988); german version EN 28050:1992
|
| DIN EN 28343-1992
| 镍铁.硅含量的测定.重量分析法(ISO 8343-1985)
| Ferronickel; determination of silicon content; gravimetric method (ISO 8343:1985); german version EN 28343:1991
|
| DIN EN 3832-2005
| 航空航天系列.耐热镍基合金NI-P100HT(铬镍铁合金718)制长螺纹细杆双六角头螺栓.等级:1550MPa(室温)/650℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 3832:2004
|
| DIN EN 3833-2005
| 航空航天系列.钝化的耐热镍基合金NI-PH2601(铬镍铁合金718)制MJ螺纹螺栓.等级:1550MPa(室温)/650℃.技术规
| Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature)/ 650 °C - Technical specification; German and English version EN 3833:2004
|
| DIN EN 4009-2006
| 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制带安全锁线孔、减径柄、长螺纹的双六角头螺栓.等级:1
| Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4009:2004
|
| DIN EN 4321-2006
| 航空航天系列.镀银耐热镍基合金NI-PH2601(铬镍铁合金718)制带安全锁线孔、减径柄、长螺纹的双六角头螺栓.等
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4321:2004
|
| DIN EN 4352-2006
| 航空航天系列.镀MoS2的耐热镍基合金NI-PH2601(铬镍铁合金 718)制带安全锁线孔、减径柄、长螺纹的双六角头螺
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated - Classification: 1550 MPa (at ambient temperature) /425 °C; German and English version EN 4352:2004
|
| EN 2583-1997
| 航空航天系列 NI-PH2601(铬镍铁合金718)耐热镍基合金MJ螺纹螺栓 等级：1275MPa( 环境温度)/650℃ 技术规
| Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ - Technical specification
|
| EN 26352-1991
| 镍铁 镍含量的测定 丁二酮肟重量分析法
| Ferronickel; determination of nickel content; dimethylglyoxime gravimetric method (ISO 6352:1985)
|
| EN 26501-1992
| 镍铁 交货要求的规范
| Ferronickel; specification and delivery requirements (ISO 6501:1988)
|
| EN 27520-1991
| 镍铁 钴含量的测定 火焰原子吸收光谱测定法
| Ferronickel; determination of cobalt content; flame atomic absorption spectrometric method (ISO 7520:1985)
|
| EN 27526-1991
| 镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后红外线吸收法
| Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985)
|
| EN 27527-1991
| 镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后碘量滴定法
| Nickel, ferronickel and nickel alloys; determination of sulfur content; iodometric titration method after induction furnace combustion (ISO 7527:1985)
|
| EN 28049-1992
| 镍铁丸 分析取样
| Ferronickel shot; sampling for analysis (ISO 8049:1988)
|
| EN 28050-1992
| 镍铁合金锭或块 分析取样
| Ferronickel ingots or pieces; sampling for analysis (ISO 8050:1988)
|
| EN 28343-1991
| 镍铁 硅含量的测定 重量法
| Ferronickel; determination of silicon content; gravimetric method (ISO 8343:1985)
|
| EN 2934-1996
| 航空航天系列 合金NI-P100HT((铬镍铁合金718)耐热镍基镀银长螺纹细螺柄T形头螺栓 等级：1275 MPa(环境温
| Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 ℃
|
| EN 2942-1998
| 航空航天系列 NI-PH2801(铬镍铁合金X750)耐热镍基合金镀银螺旋形自锁式螺纹插件
| Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
|
| EN 3008-1998
| 航空航天系列 NI-P100HT(铬镍铁合金718) 耐热镍基合金长螺纹细柄六角头螺栓 等级：1275MPa(环境温度)/650
| Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃
|
| EN 3009-1998
| 航空航天系列 镀银NI-P100HT(铬镍铁合金718) 耐热镍基合金长螺纹细柄六角头螺 栓 等级：1275MPa(环境温度
| Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650℃
|
| EN 3236-1998
| 航空航天系列 镀银耐热镍基合金NI-P100HT(铬镍铁合金718) 薄壁自锁紧短内螺纹插件
| Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
|
| EN 3237-1998
| 航空航天系列 镀银耐热镍基合金NI-P100HT(铬镍铁合金718) 薄壁自锁紧长内 螺纹插件
| Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
|
| EN 3297-1998
| 航空航天系列 NI-P100HT(铬镍铁合金718)耐热镍基合金MJ螺纹薄壁自锁紧插件 技术规范
| Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification
|
| EN 3542-1998
| 航空航天系列 耐热镍基合金NI-PH2801(铬镍铁合金X750)螺旋形线圈自锁式螺纹插件
| Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2081 (Inconel X750)
|
| GB/T 11297.10-1989
| 热释电材料居里温度 TC 的测试方法
| Test method for curie temperature of TC pyroelectric materials
|
| GB/T 12725-1991
| 铁镍碱性蓄电池总规范
| General specification for alkaline nickel-iron rechar geable batteries
|
| GB/T 3389.3-2001
| 压电陶瓷材料性能试验方法居里温度TC的测试
| Test methods for the properties of piezoelectric ceramics test for Curie temperature TC
|
| ISO 11400-1992
| 镍、镍铁和镍合金 磷含量的测定 二氧磷钒钼分子吸收光谱法
| Nickel, ferronickel and nickel alloys; determination of phosphorus content; phosphovanadomolybdate molecular absorption spectrometric method
|
| ISO 11438-1-1993
| 镍铁 用电热原子吸收光谱法对痕量元素含量 第1部分:一般要求和样品分解
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 1: general requirements and sample dissolution
|
| ISO 11438-2-1993
| 镍铁 用电热原子吸收光谱法对痕量元素含量 第2部分:铅含量的测定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 2: determination of lead content
|
| ISO 11438-3-1993
| 镍铁 用电热原子吸收光谱法对痕量元素含量 第3部分:锑含量的测定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 3: determination of antimony content
|
| ISO 11438-4-1993
| 镍铁 用电热原子吸收光谱法对痕量元素含量 第4部分:锡含量的测定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 4: determination of tin content
|
| ISO 11438-5-1993
| 镍铁 用电热原子吸收光谱法对痕量元素含量 第5部分:碲含量的测定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 5: determination of tellurium content
|
| ISO 11438-6-1993
| 镍铁 用电热原子吸收光谱法对痕量元素含量 第6部分:铊含量的测定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 6: determination of thallium content
|
| ISO 11438-7-1993
| 镍铁 用电热原子吸收光谱法对痕量元素含量 第7部分:银含量的测定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 7: determination of silver content
|
| ISO 11438-8-1993
| 镍铁 用电热原子吸收光谱法对痕量元素含量 第8部分:铟含量的测定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 8: determination of indium content
|
| ISO 6352-1985
| 镍铁 镍含量的测定 丁二酮肟重量分析法
| Ferronickel; Determination of nickel content; Dimethylglyoxime gravimetric method
|
| ISO 6501-1988
| 镍铁 规范与交货条件
| Ferronickel; specification and delivery requirements
|
| ISO 7520-1985
| 镍铁 钴含量的测定 火焰原子吸收光谱测定法
| Ferronickel; Determination of cobalt content; Flame atomic absorption spectrometric method
|
| ISO 7524-1985
| 镍、镍铁和镍合金 碳含量的测定 感应电炉燃烧后红外线吸收法
| Nickel, ferronickel and nickel alloys; determination of carbon content; infra-red absorption method after induction furnace combustion
|
| ISO 7526-1985
| 镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后红外线吸收法
| Nickel, ferronickel and nickel alloys; Determination of sulfur content; Infra-red absorption method after induction furnace combustion
|
| ISO 7527-1985
| 镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后碘量滴定法
| Nickel, ferronickel and nickel alloys; Determination of sulfur content; Iodimetric titration method after induction furnace combustion
|
| ISO 8049-1988
| 镍铁丸 分析取样
| Ferronickel shot; sampling for analysis
|
| ISO 8050-1988
| 镍铁合金锭或块 分析取样
| Ferronickel ingots or pieces; sampling for analysis
|
| ISO 8343-1985
| 镍铁 硅含量的测定 重量法
| Ferronickel; Determination of silicon content; Gravimetric method
|
| JIS A5011-2-2003
| 混凝土用矿渣集料.第2部分:镍铁矿渣集料
| Slag aggregate for concrete -- Part 2: Ferronickel slag aggregate
|
| JIS G1326-2000
| 镍铁的化学分析方法
| Methods for chemical analysis of ferronickel
|
| JIS G1604-2000
| 铁合金化学分析的取样方法(第4部分:镍铁合金)
| Methods of sampling for chemical analysis of ferroalloys (Part 4: Ferronickel)
|
| JIS G2316-2000
| 镍铁
| Ferronickel
|
| NF A10-621-1992
| 镍、镍铁和镍合金.硫的测定.通过在感应炉内燃烧后的红外线吸收法
| (Nickel, ferronickel and nickel alloys. Determination of sulfur content. Infra-red absorption method after induction furnace combustion.)
|
| NF A10-622-1992
| 镍、镍铁和镍合金.硫的测定.感应炉内燃烧后碘量滴定法
| (Nickel, ferronickel and nickel alloys. Determination of sulfur content. Iodimetric titration method after induction furnace combustion.)
|
| NF A10-656-1968
| 镍铁合金的化学分析.镍钴总含量的电解法测定
| (CHEMICAL ANALYSIS OF FERRO-NICKEL. ELECTROLYTIC DETERMINATION OF TOTAL NICKEL + COBALT.)
|
| NF A13-602-1992
| 铁镍合金球.分析取样
| (FERRONICKEL SHOT. SAMPLING FOR ANALYSIS. (EUROPEAN STANDARD EN 28409).)
|
| NF A13-603-1992
| 镍铁块或件.分析用取样
| (Ferronickel ingots or pieces. Sampling for analysis.)
|
| NF A54-301-1973
| 镍和镍合金.具有延伸特征的铁镍合金
| (NICKEL AND NICKEL ALLOYS. IRON-NICKEL ALLOYS WITH PARTICULAR DILATABILITY.)
|
| NF L24-030-1997
| 航空航天系列.镍基合金NI-PH2601(铬镍铁合金718)制耐热MJ螺纹螺栓.等级:1275MPA(室温)/650℃.技术规范(欧洲
| (AEROSPACE SERIES. BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2583).)
|
| NF L24-960-1998
| 航空系列.耐热镍基合金NI-P100HT(铬镍铁合金718)自锁紧薄壁MJ螺纹插入物.技术规范
| (Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Technical specification.)
|
| NF L24-961-1998
| 航空系列.耐热镍基合金NI-P100HT(铬镍铁合金718)镀银内短螺纹自锁紧薄壁插入物
| (Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread. Aerospace series.)
|
| NF L24-962-1998
| 航空系列.耐热镍基合金NI-P100HT(铬镍铁合金718)镀银内长螺纹自锁紧薄壁插入物
| (Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread. Aerospace series.)
|
| YB/T 5231-2005
| 定膨胀封接铁镍钴合金
| ()
|
| YB/T 5235-2005
| 定膨胀封接铁镍铬、铁镍合金
| ()
|
| YB/T 5236-2005
| 杜美丝芯用铁镍合金4J43
| ()
|
| YB/T 5237-2005
| 玻封铁镍铜合金4J41
| ()
|
| YB/T 5238-2005
| 线纹尺用定膨胀铁镍合金4J58
| ()
|
| YB/T 5241-2005
| 低膨胀铁镍、铁镍钴合金
| ()
|
| YS/T 634-2007
| 羰基镍铁粉
| Ferronickel Carbonyl Powder
|
| prEN 3913-1999
| 航空航天系列 部件修复用耐热镍基合金 NI-PH2601 (NI-P100HT铬镍铁合金718)、薄壁自锁短内螺纹上镀银的插
| Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), silver plated internal thread, for salvage of components
|
| prEN 3914-1999
| 航空航天系列 部件修复用耐热镍基合金 NI-PH2601 (NI-P100HT铬镍铁合金718)、薄壁自锁长上镀银的插件
| Aerospace series - Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), silver plated on internal thread, for salvage of components
|
| prEN 3915-1999
| 航空航天系列 部件修复用耐热镍基合金 NI-PH2601 (NI-P100HT铬镍铁合金718)、薄壁自锁ＭＪ螺纹插件 等级
| Aerospace series - Insert, thin wall, self-locking, Mj threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), for salvage of components, classification: 1275 MPa (at ambient temperature)/550℃ - Technical specification
|
| 编号 | 中文名称 | 英文名称 |
|---|