| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI/ASTM D1525-2000 | 塑料维卡(Vicat)软化温度试验方法(08.01) | Test Method for Vicat Softening Temperature of Plastics (08.01) |
| ANSI/ASTM D2319-1998 | 硬沥青软化点的试验方法(空气中立方块试验法) | Test Method for Softening Point of Pitch (Cube-In-Air Method) |
| ANSI/ASTM D3104-1999 | 沥青软化点的试验方法(Mettler软化点法) | Test Method for Softening Point of Pitches (Mettler Softening Point Method) |
| ANSI/ASTM D3461-1997 | 地沥青和硬沥青软化点测试方法(Mettler杯球法) | Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-And-Ball Method) |
| ANSI/ASTM D61-1975 | 硬沥青软化点试验方法(水中方块法) | Test Method for Softening Point of Pitches (Cube-In-Water Method) |
| ANSI/NSF 44-2004 | 民用阳离子交换水软化剂(i11) | Residential cation exchange water softeners (i11) |
| ANSI/NSF 44?i10)-2002 | 住宅用阳离子交换水软化剂 | Residential Cation Exchange Water Softeners (i10) |
| ANSI/NSF 44�(i10)-2002 | 住宅用阳离子交换水软化器 | Residential Cation Exchange Water Softeners (i10) |
| ASTM C 1350M-1996 | 在软化点和退火范围(大约108Pa.s到大约1013Pa.s)之间玻璃黏滞度测定的标准试验方法 | Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa˙s to Approximately 10 13 Pa˙s) by Beam Bending (Metric) |
| ASTM C 336-1971 | 用纤维伸长法测定玻璃的软化点和应变点的试验方法 | Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation |
| ASTM C 338-1993 | 玻璃的软化点的标准试验方法 | Standard Test Method for Softening Point of Glass |
| ASTM C 598-1993 | 用梁弯曲法测定玻璃的软化点和应变点的标准试验方法 | Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending |
| ASTM C 965-1996 | 软化点以上的玻璃粘度的测定的标准实施规程 | Standard Practice for Measuring Viscosity of Glass Above the Softening Point |
| ASTM D 2319-1998 | 硬沥青软化点的标准试验方法(空气中立方块试验法) | Standard Test Method for Softening Point of Pitch (Cube-in-Air Method) |
| ASTM D 3104-1999 | 硬沥青软化点的标准试验方法 | Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method) |
| ASTM D 3461-1997 | 硬沥青软化点的试验方法(米勒杯球法) | Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
| ASTM D 36-1995 | 沥青软化点标准试验方法(沥青软化点测定器) | Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) |
| ASTM D 3642-1998 | 某些碱溶性树脂软化点的试验方法 | Test Method for Softening Point of Certain Alkali-Soluble Resins |
| ASTM D 5070-1990 | 采用电位滴定法的织物软化剂中合成季胺盐的标准试验方法 | Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations |
| ASTM D 5237-2005 | 织物软化剂评定的标准指南 | Standard Guide for Evaluating Fabric Softeners |
| ASTM D 5346-1993 | 测定油乳液和软化化合物用石油润滑油倾点的试验方法 | Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds |
| ASTM D 6090-1999 | 软化点树脂标准试验方法(杯球法) | Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method) |
| ASTM D 61-1975 | 硬沥青的软化点的试验方法(水中方块试验法) | Standard Test Method for Softening Point of Pitches (Cube-in-Water Method) |
| ASTM D 6493-2005 | 用自动环球仪测定烃类树脂软化点的标准试验方法 | Standard Test Method for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus |
| ASTM E 2347-2005 | 使用热机分析法测试压痕软化温度的标准试验方法 | Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis |
| ASTM E 28-1999 | 用环球仪测定从松脂制品中取得的树脂的软化点的标准试验方法 | Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus |
| BS 2HR 401-1973 | 冷加工和软化的无缝镍铬钛铝耐热合金管(镍基、Cr 19.5、Ti 2.2、Al 1.4)规范 | Specification for nickel-chromium-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Ti 2.2, Al 1.4) |
| BS 6043-1.3-1983 | 制铝工业用炭素材料取样与试验方法.第1部分:电极硬柏油脂.第3节:软化点测定(环、球法) | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of softening point (ring and ball method) |
| BS 6782-6-1987 | 涂料用粘合剂.第6部分:软化点的测定方法 | Binders for paints - Method for determination of softening point (ring and ball method) |
| BS 7034-6-1989 | 玻璃粘度和测定粘度固定点.第6部分:软化点的测定方法 | Viscosity and viscometric fixed points of glass - Method for the determination of softening point |
| BS EN 1238-1999 | 粘合剂.热塑性粘合剂软化点的测定(环形和球形) | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
| BS EN 1427-2000 | 石油及其制品的试验方法.沥青和沥青粘合剂.软化点的测定.环和球软点测定法 | Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of softening point - Ring and ball method |
| BS EN 2155-14-1993 | 飞机窗玻璃用透明材料的试验方法.1/10维卡特软化温度的测定 | Test methods for transparent materials for aircraft glazing - Determination of the 1/10 Vicat softening temperature |
| BS EN 727-1995 | 塑料管道和管道系统.热塑性塑料管和配件.维卡(vicat)软化温度的测定 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| BS EN ISO 306-2004 | 塑料.热塑性材料.维卡(VICAT)软化温度的测定 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) |
| BS HR 209-1989 | 镍-铬-钴-钼-钛-铝耐热合金薄板材、带材和板材:软化的(镍基、Cr18、Co14、 Mo7、Ti2.2、Al2.1)规范 | Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1) |
| BS HR 402-1973 | 冷加工和软化的无缝镍铬钴钛铝耐热合金管(镍基、Cr19.5、Co18.0、Ti2.5、Al1.5)规范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS HR 403-1973 | 冷加工和软化的无缝镍铬钛耐热合金管(镍基、Cr19.5、Ti0.4)规范 | Specification for nickel-chromium-titanium heat-resisting alloy cold-worked and softened seamless tubes (nickel base, Cr 19.5, Ti 0.4) |
| BS HR 506-1989 | 镍-铬-钴-钛-铝耐热合金线材:软化的(镍基、Cr19.5、Co1.8、Ti2.5、Al1.5)规范 | Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (Nickel base, Cr 19.5, Co 18, Ti 2.5, Al 1.5) |
| BS ISO 4625-1-2005 | 色漆和清漆用粘合剂.软化点的测定.环和球法 | Binders for paint and varnishes - Determination of softening point - Ring-and-ball method |
| BS ISO 4625-2-2005 | 色漆和清漆用粘合剂.软化点的测定.杯和球法 | Binders for paint and varnishes - Determination of softening point - Cup-and-ball method |
| DIN 1996-15-1975 | 筑路和相关用途沥青材料的检验.第15部分:根据威廉米法测定软化点 | Testing of Bituminous Materials for Road Building and Related Purposes; Determination of Softening Point in accordance with Wilhelmi |
| DIN 29640-1986 | 航空航天.丙烯酸酯塑料的软化处理.制造规程 | Aerospace; tempering of acrylic plastics; directives for manufacture |
| DIN 51920-1984 | 炭素材料试验.Mettler软化点的测定.粘接材料和浸渍材料 | Testing of carbon materials; determination of the Mettler softening point; binding and impregnating materials |
| DIN 52025-2004 | 含碳材料的检验.Kraeme-Sarnow软化点的测定 | Testing of carbonaceous materials - Determination of the Kraemer-Sarnow softening point |
| DIN 53180-1996 | 漆和类似涂料的粘结剂.树脂软化温度测定 | Binders for paints and varnishes - Determination of the softening temperature of resins |
| DIN EN 1238-1999 | 胶粘剂.热塑性粘接剂(环型和球型)软化点的测定 | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball); German version EN 1238:1999 |
| DIN EN 1427-1999 | 沥青和沥青粘合剂.软化点测定.圆环法和压球法 | Bitumen and bituminous binders - Determination of the softening point - Ring and ball method; German version EN 1427:1999 |
| DIN EN 14743-2006 | 建筑物内水处理设备.软化剂.性能、安全和试验的要求 | Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing; German version EN 14743:2005 |
| DIN EN 2155-14-1993 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第14部分:1/10维卡特软化温度的测定 | Aerospace series; test methods for transparent materials for aircraft glazing; part 14: determination of the 1/10 vicat softening temperature; German version EN 2155-14:1993 |
| DIN EN 727-1995 | 塑料管道和管道输送系统.热塑塑料管和管件.维卡软化温度(VST)的测定; 德文版本 EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994 |
| DIN EN ISO 306-2004 | 塑料.热塑性材料.维卡特(VICAT)软化温度的测定(VST) | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2004); German version EN ISO 306:2004 |
| DIN EN ISO 4625-1-2006 | 色漆和清漆用粘合剂.软化点的测定.第1部分:环-球法 | Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004); German version EN ISO 4625-1:2006 |
| DIN EN ISO 4625-2-2006 | 色漆和清漆用粘合剂.软化点的测定.第2部分:环窝接合法 | Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004); German version EN ISO 4625-2:2006 |
| DIN ISO 7884-6-1998 | 玻璃.粘度和粘度固定点.第6部分:软化点的测定 | Glass - Viscosity and viscometric fixed points - Part 6: Determination of softening point (ISO 7884-6:1987) |
| EN 1238-1999 | 胶粘剂 热塑性胶粘剂软化点的测定（环和球） | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
| EN 1427-1999 | 沥青和沥青粘合剂 软化点的测定 圆环法和圆球法 | Bitumen and bituminous binders - Determination of the softening point - Ring and ball method |
| EN 727-1994 | 塑料管道和导管系统 热塑性管和配件 维卡（Vicat）软化温度（VST）的测定 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| EN ISO 306-1996 | 塑料 热塑性材料 维卡软化温度的测定 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:1994) |
| GB/T 11409.3-2003 | 橡胶防老剂、硫化促进剂软化点的测定 | Test method of softening point for rubber antiagers and vulcanizing accelerators |
| GB/T 12007.6-1989 | 环氧树脂软化点测定方法环球法 | Epoxide resins--Determination of softening point--Ring and ball method |
| GB/T 15332-1994 | 热熔胶粘剂软化点的测定环球法 | Determination of the softening point ofhot-melt adhesives--Ball and ring method |
| GB/T 1633-2000 | 热塑性塑料维卡软化温度(VST)的测定 | Plastics--Thermoplastic materials--Determination of Vicat softening temperature(VST) |
| GB/T 2294-1997 | 焦化固体类产品软化点测定方法 | Solid products of coal carbonization--Determination of softening point |
| GB/T 4507-1999 | 沥青软化点测定法(环球法) | Standard test method for softening point of bitumen (Ring-and-ball apparatus) |
| GB/T 5989-1998 | 耐火制品荷重软化温度试验方法示差-升温法 | Refractory products--Determination of refractoriness-under-load--Differential-with rising temperature |
| GB/T 8802-2001 | 热塑性塑料管材、管件维卡软化温度的测定 | Thermoplastics pipes and fitting--Determination of vicat softening temperature |
| GB/T 9284-1988 | 色漆和清漆用漆基软化点的测定环球法 | Binders for paints and varnishes--Determination of softening point--Ring-and-ball method |
| ISO 17235-2002 | 皮革.物理和机械试验.软化度测定 | Leather - Physical and mechanical tests - Determination of softness |
| ISO 1893-2005 | 耐火制品.荷重软化温度(荷重耐溶性)的测定.升温示差法 | Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature |
| ISO 2507-1-1995 | 热塑性塑料管材和管件 维卡软化温度 第1部分:一般试验方法 | Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method |
| ISO 2507-2-1995 | 热塑性塑料管材和管件 维卡软化温度 第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚 | Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes |
| ISO 2507-3-1995 | 热塑性塑料管材和管件 维卡软化温度 第3部分:丙烯腈-丁二烯-苯乙烯共聚物和丙烯腈-丁二烯-丙烯酸酯共聚物管 | Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings |
| ISO 306-2004 | 塑料.热塑性材料.维卡特(VICAT)软化温度的测定 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) |
| ISO 4625-1-2004 | 色漆和清漆用粘合剂.软化点的测定.第1部分:环球法 | Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method |
| ISO 4625-2-2004 | 色漆和清漆用粘合剂.软化点的测定.第2部分:环窝接合法 | Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method |
| ISO 5940-1981 | 铝生产用碳素材料 电极用沥青 用环和球法测定软化点 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of softening point by the ring-and-ball method |
| ISO 7884-6-1987 | 玻璃 粘度和粘度固定点 第6部分:软化点的测定 | Glass; Viscosity and viscometric fixed points; Part 6 : Determination of softening point |
| JB/T 4279.8-2008 | 漆包绕组线试验仪器设备检定方法 第8部分：软化击穿试验仪 | Verification procedure for test equipment of enamelled winding wire Part8:Cut-through tester |
| JB/T 5636-1991 | 光学玻璃软化加热炉 能耗分等 | () |
| JB/T 5705-1991 | 铝材软化退火电阻加热炉 能耗分等 | () |
| JB/T 5706-1991 | 铜材软化退火电阻加热炉 能耗分等 | () |
| JIS K5601-2-2-1999 | 涂料成份的试验方法.第2部分:溶剂溶解物质的成份分析.第21节:软化点(环和球法) 塗料成分試験方法 ― 第２部：溶剤可溶物中の成分分析 ― 第２節：軟化点（環球法） | Testing methods for paint components -- Part 2: Component analysis in solvent soluble matter -- Section 2: Softening point (Ring and ball method) |
| JIS K6863-1994 | 热溶粘接剂软化点的试验方法 ホットメルト接着剤の軟化点試験方法 | Testing methods for the softening point of hot melt adhesives |
| JIS K7196-1991 | 用热机械分析法测定热塑性塑料薄膜及薄板软化温度的测试方法 熱可塑性プラスチックフィルム及びシートの熱機械分析による軟化温度試験方法 | Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis |
| JIS K7206-1999 | 塑料.热塑性材料.维卡软化温度的测定 プラスチック ― 熱可塑性プラスチック ― ビカット軟化温度（ＶＳＴ）試験方法 | Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST) |
| JIS K7234-1986 | 环氧树脂软化点的测试方法 エポキシ樹脂の軟化点試験方法 | Testing methods for softening point of epoxide resins |
| JIS R3103-1-2001 | 玻璃的粘度和测粘固定点.第1部分:软化点的测定 ガラスの粘性及び粘性定点 ― 第１部：軟化点の測定方法 | Viscosity and viscometric fixed points of glass -- Part 1: Determination of softening point |
| JIS T3231-2005 | 硬化心切开术/静脉储存系统(带或不带过滤器)以及软化静脉储存袋 人工心肺回路用貯血槽 | Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags |
| MT/T 44-1987(2005) | 煤和岩石单向抗压强度及软化系数测定方法 | () |
| NF B30-102-1968 | 玻璃.软化温度的测定.(LITTLETON点) | (GLASS. DETERMINATION OF SOFTENING POINT. (LITTLETON POINT).) |
| NF G52-033-2003 | 皮革.物理和机械试验.软化度测定 | (Leather - Physical and mechanical tests - Determination of softness.) |
| NF L17-600-14-1993 | 航空航天系列.飞机窗用透明材料的试验方法.第14部分:1/10维卡软化温度的测定(EN 2155-14) | (Aerospace series. Test methods for transparent materials for aircraft glazing. Part 14 : determination of the 1/10 vicat softening temperature.) |
| NF P98-623-1991 | 路面横标记.路面上使用的标记.聚乙烯树脂软化的分析 | (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. ANALYSIS OF SLIGHTLY OR NON POLAR PLASTICIZERS OF POLYDIENIC RESINS.) |
| NF T20-167-1986 | 生产铝用碳质材料.电极用沥青.用环球法测定软化点 | (CARBONACEOUS MATERIALS FOR THE PRODUCTION OF ALUMINIUM. PITCH FOR ELECTRODES. DETERMINATION OF SOFTENING POINT BY THE RING-BALL METHOD.) |
| NF T51-021-1997 | 塑料.热塑塑料.维卡(VICAT)软化温度的测定 | (Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).) |
| NF T51-437-1985 | 塑料.固态酚树脂.软化点的测定.珠环法 | (PLASTICS. SOLID PHENOLIC RESINS. DETERMINATION OF SOFTENING POINT. “BALL AND RING“ METHOD.) |
| NF T54-024-1994 | 塑料管道系统.热塑塑料管和配件.维卡软化点的测定 | (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS. DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST). (EUROPEAN STANDARD EN 727).) |
| NF T60-147-2003 | 石油产品.石蜡产品软化点的测定.环法和球法 | (Petroleum products - Determination of softening point of paraffin products - Ring and ball method.) |
| NF T66-008-2000 | 沥青和沥青粘合剂.软化点的测定.圆环法和压球法 | (Bitumen and bituminous binders - Determination of softening point - Ring and Ball method.) |
| QC/T 29089-1992(2005) | 汽车软化仪表板表皮 | () |
| SY/T 5644-1993(2006年确认) | 石油沥青软化点试验器技术条件 | () |
| YB/T 2203-1998(2005) | 耐火浇注料荷重软化温度试验方法（非示差-升温法） | () |
| YB/T 370-1995(2005) | 耐火制品荷重软化温度试验方法（非示差-升温法） | () |
| YB/T 4024-1991(2005) | 耐火泥浆荷重软化温度试验方法 （升温法） | () |
| prEN 2120-1977 | 航空航天系列 软化和冷拉钢FE-PA12 棒材和线材0.25毫米D2.5毫米 | Aerospace series; steel FE-PA 12, softened and cold drawn; bars and wires 0,25 mm D 2,5 mm |
| prEN 2469-1998 | 航空航天系列 气体熔化钢FE-PA3901 (X1CrNi18-10) 软化的 钢丝 0,4 D 12,5 m | Aerospace series - Steel FE-PA3901 (X1CrNi18-10) air melted - Softened - Wires - 0,4 D 12,5 mm - 450 MPa R<(Index)m> 650 MPa |
| prEN 3163-1999 | 航空航天系列 FE-PM3801 (X5CrNiCu17-4)空气熔炼软化钢 锻坯a 或 D≥300 mm | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) air melted, softened - Forging stock a or D ≥ 300 mm |
| prEN 3359-1998 | 航空航天系列 真空感应熔炼和消耗电极再熔炼固溶处理和沉淀处理软化的FE-PM1503 (X3CrNiMoAl13-8-2)钢 锻 | Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D 300 mm |
| prEN 3364-2000 | 航空航天系列 消耗电极再熔炼软化的FE-PM1802 (X5CrNiCu15-5)钢 锻坯a 或 D≤300 mm | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) consumable electrode remelted, softened - Forging stock a or D 300 mm |
| prEN 3365-1998 | 航空航天系列 空气熔炼软化的FE-PM3901 (X15CrNi17-3)钢 锻坯a 或 D≤ 300 mm | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) air melted - Softened - Forging stock - a or D 300 mm |
| prEN 3476-1998 | 航空航天系列 FE-PL1501 (30CrMo12)空气熔炼钢软化锻坏 a 或 D≤300 mm | Aerospace series - Steel FE-PL1501 (30CrMo12) air melted - Softened - Forging stock - a or D 300 mm |
| prEN 3511-1999 | 航空航天系列 FE-PL1801 (100Cr6)真空感应熔炼和的消耗熔化电极再熔钢 软化的、机加工轴承制造用棒材a或 | Aerospace series - Steel FE-PL1801 (100Cr6); vacuum induction melted and consumable electrode remelted - Softened - Bar for the manufacture of machined bearings - a or D 130 mm |
| prEN 3516-1998 | 航空航天系列 FE-PL8201 (41NiCrMo2)空气熔炼 软化的钢 锻坯 a 或 D≤300 mm | Aerospace series - Steel FE-PL8201 (41NiCrMo2) air melted - Softened - Forging stock - a or D 300 mm |
| prEN 3816-1997 | 航空航天系列 FE-PA3601 (X6CrNiTi18-10) 空气熔炼钢 、软化和冷轧 薄板和带 a≤3 mm、 Rm≥800 MPa | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) air melted, softened and cold rolled - Sheet and strip a 3 mm Rm≥ 800 MPa |
| prEN 3990-1997 | 航空航天系列 FE-PA2801 (X60NiMnCr13-5-3)软化的钢 机加工用棒 De≤150 mm、 650 MPa≤Rm 900 MPa | Aerospace series - Steel FE-PA2801 (X60NiMnCr13-5-3) softened - Bar for machining D<(Index)e> 150 mm, 650 MPa R<(Index) |
| prEN 3992-1997 | 航空航天系列 FE-PA2801 (X60NiMnCr13-5-3)软化的钢 锻件 De≤150 mm、 620 MPa≤Rm≤900 MPa | Aerospace series - Steel FE-PA2801 (X60NiMnCr13-5-3) softened - Forgings D<(Index)e> 150 mm, 620 MPa R<(Index)m> 900 MPa |
| prEN 4089-1997 | 航空航天系列 真空感应熔炼和真空电弧再熔、软化FE-PL5101 (13MoCrNiV4-4-3-1)钢 锻坯a 或 D≤150 mm | Aerospace series - Steel FE-PL5101 (13MoCrNiV4-4-3-1) vacuum induction melted and vacuum arc remelted, softened - Forging stock a or D 150 mm |
| prEN 4346-2000 | 航空航天系列 FE-PM1505 (X1CrNiMoAlTi12-9-2) 真空感应熔炼和消耗电极再熔炼软化的钢 锻坯a 或D≤300 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock a or D 300 mm |
| prEN 4347-2000 | 航空航天系列 FE-PM1506 (X3CrNiMoAl13-8-2)真空感应熔炼和再消耗电极再熔炼软化的钢 锻坯a 或D≤300 mm | Aerospace series - Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock a or D 300 mm |
| prEN ISO 306-2002 | 塑料 热塑性材料 维卡软化温度的测定 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO/DIS 306:2002) |
| 编号 | 中文名称 | 英文名称 |