| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI/ASTM E1155-1996 | 用F-值系统测定地板平直度和水平度的试验方法 | Test Method for Determining Floor Flatness and Levelness Using the F-Number System (04.11) |
| ANSI/ASTM E1155M-1996 | 用F-数字系统(米制)测定地板平直度和水平度的试验方法 | Test Method for Determining Floor Flatness and Levelness Using the F-Number System (Metric) (04.11) |
| ANSI/ASTM E1155M-1996 | 用F-数字系统(米制)测定地板平直度和水平度的试验方法 | Test Method for Determining Floor Flatness and Levelness Using the F-Number System (Metric) (04.11) |
| ANSI/ASTM F1889-2005 | 箭杆平直度测量指南 | Guide for Straightness Measurement of Arrow Shafts |
| ANSI/SMPTE 206-1998 | 电影设备(8mm S型).1型有声摄像机卡式带盘.孔、外形、胶片位置、压片和平直度(容量200英尺) | Motion-Picture Equipment (8-mm Type S) - Model 1 Sound Camera Cartridge - Aperture, Profile, Film Position, Pressure Pad and Flatness (200-ft Capacity) |
| ASTM C 550-2003 | 刚性绝热块和板的平直度和精度的标准试验方法 | Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation |
| ASTM E 1155-1996 | 使用F-数字制测定楼板平正度和水平度的试验方法 | Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers |
| ASTM E 1155M-1996 | 使用F-数字制测定楼板平正度和水平度的试验方法(米制) | Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric] |
| ASTM E 1486-1998 | 利用波纹度、行车轨迹和水平度准则测定地板公差的标准试验方法 | Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria |
| ASTM E 1486M-1998 | 利用波纹度、行车轨迹和水平度准则(米制)测定地板公差的标准试验方法 | Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric] |
| ASTM F 1889-2005 | 测量箭杆平直度的标准指南 | Standard Guide for Straightness Measurement of Arrow Shafts |
| ASTM F 2055-2000 | 测微仪法测定弹性地板砖尺寸和垂直度的标准试验方法 | Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method |
| ASTM F 691-1980 | 测量平面度偏差用光板的制备 | Preparing Photoplates for Measuring Flatness Deviation |
| BS 5277-1976 | 门.门扇总平直度缺陷测量 | Doors - Measurement of defects of general flatness of door leaves |
| BS EN 12956-1999 | 成卷形式的墙面饰层.尺寸、平直度、防水性和可洗涤性的测定 | Wallcoverings in roll form - Determination of dimensions, straightness, spongeability and washability |
| BS EN 13467-2001 | 建筑设备和工业设施用隔热制品.预制管绝缘层的尺寸、垂直度和线性度的测定 | Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation |
| BS EN 1848-1-2000 | 防水柔性板.长度,宽度和垂直度的测定.屋顶防水用沥青板 | Flexible sheets for waterproofing - Determination of length, width and straightness - Bitumen sheets for roof waterproofing |
| BS EN 1848-2-2001 | 防水柔性板.长度、宽度和平直度的测定.屋顶防水用塑料和橡胶薄板 | Flexible sheets for waterproofing - Determination of length, width and straightness - Plastic and rubber sheets for roof waterproofing |
| BS EN 29008-1994 | 玻璃瓶垂直度试验方法 | Glass bottles - Verticality - Test method |
| BS EN 324-2-1993 | 木基板.板尺寸测定.垂直度和边缘直线度测定 | Wood-based panels - Determination of dimensions of boards - Determination of squareness and edge straightness |
| BS EN 426-1993 | 弹性地板覆盖物.薄片材的宽度、长度、正直度和平面度的测定 | Resilient floor coverings - Determination of width, length, straightness and flatness of sheet material |
| BS EN 427-1994 | 弹性地板覆盖物.弹性砖边长、度和、垂直度和正直度的测定 | Resilient floor coverings - Determination of the side length, squareness and straightness of tiles |
| BS EN 824-1995 | 建筑用隔热产品.垂直度的测定 | Thermal insulating products for building applications - Determination of squareness |
| BS EN 994-1996 | 铺地纺织物.铺地砖边长、垂直度和平直度的测定 | Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
| BS ISO TR 10064-3-1997 | 圆柱齿轮.检验实施标准.与齿轮坯料,轴心距和轴的平行度相关的推荐值 | Cylindrical gears - Code of inspection practice - Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| DIN 7167-1987 | 尺寸,形状和平行度公差之间的关系.图纸上无单独说明的图形包络线要求 | Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing |
| DIN EN 13467-2001 | 建筑设备和工业设施隔热制品.预制管绝缘层尺寸、垂直度和线性度测定 | Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation; German version EN 13467:2001 |
| DIN EN 1848-1-1999 | 防水软板.长度、宽度和平直度测定.第1部分:屋顶防水沥青毡 | Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing; German version EN 1848-1:1999 |
| DIN EN 1848-2-2001 | 防水软板.长度、宽度、平直度和平整度测定.第2部分:屋顶防水塑料和橡胶板. | Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 1848-2:2001 |
| DIN EN 29008-1994 | 玻璃瓶.垂直度.试验方法 | Glass bottles; verticality; test method (ISO 9008:1991); German version EN 29008:1994 |
| DIN EN 324-2-1993 | 木质板料.板料尺寸测定.垂直度和棱边平直性测定 | Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness; German version EN 324-2:1993 |
| DIN EN 824-1994 | 建筑物热绝缘产品.垂直度测定 | Thermal insulating products for building applications - Determination of squareness; German version EN 824:1994 |
| DIN EN 825-1994 | 建筑物热绝缘产品.平直度测定 | Thermal insulating products for building applications - Determination of flatness; German version EN 825:1994 |
| DIN EN 951-1999 | 门扉.高、宽、厚和垂直度测量方法 | Door leaves - Method for measurement of height, width, thickness and squareness; German version EN 951:1998 |
| DIN EN 994-1995 | 织物地毯.瓷砖边长和垂直度的测定; 德文版本 EN 994:1995 | Textile floor coverings - Determination of the length of the edges and squareness of tiles; German version EN 994:1995 |
| DIN ISO/TS 12780-1-2005 | 产品几何量技术规范(GPS).平直度.第1部分:平直度的词汇和参数 | Geometrical Product Specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO/TS 12780-1:2003) |
| DIN ISO/TS 12780-2-2005 | 产品几何量技术规范(GPS).平直度.第2部分:规范操作人员 | Geometrical Product Specifications (GPS) - Straightness - Part 2: Specification operators (ISO/TS 12780-2:2003) |
| EN 12956-1999+A1-2001 | 卷筒形墙面覆盖物 尺寸、垂直度、吸水性及可洗涤性的测定 | Wallcoverings in roll form - Determination of dimensions, straightness, spongeability and washability |
| EN 13467-2001 | 建筑设备和工业装置用保温制品 预成型管道保温层的尺寸、垂直度和直线度的测定 | Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation |
| EN 1848-1-1999 | 挠性防水薄板 长度、宽度和平直度的测定 第1部分：屋顶防水用沥青板 | Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing |
| EN 1848-2-2001 | 挠性防水薄板 长度、宽度和平直度的测定 第2部分：屋顶防水用塑料和橡胶板 | Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN 29008-1994 | 玻璃瓶 垂直度 试验方法 | Glass bottles; verticality; test method (ISO 9008:1991) |
| EN 29009-1994 | 玻璃容器 以容器底作基准的瓶口高度和不平行度 试验方法 | Glass containers; height and non-parallelism of finish with reference to container base; test methods (ISO 9009:1991) |
| EN 29885-1994 | 广口玻璃容器.顶部密封表面的平面度偏差.试验方法 | Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods (ISO 9885:1991) |
| EN 324-2-1993 | 木基板 板尺寸测定 第2部分：垂直度和边缘平直度测定 | Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness |
| EN 324-2-1993 | 木基板 板尺寸测定 第2部分：垂直度和边缘平直度测定 | Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness |
| EN 426-1993 | 弹性地板覆盖物 板材宽度、长度、平直度和平面度的测定 | Resilient floorcoverings; determination of width, length, straightness and flatness of sheet material |
| EN 427-1994 | 弹性地板覆盖物 瓷砖边长、垂直度和平直度的测定 | Resilient floor coverings - Determination of the side length, squareness and straightness of tiles |
| EN 427-1994 | 弹性地板覆盖物 瓷砖边长、垂直度和平直度的测定 | Resilient floor coverings - Determination of the side length, squareness and straightness of tiles |
| EN 772-20-2000 | 砌块的试验方法 第20部分：聚合混凝土、人造石料和天然石料砌块表面平面度的测定 | Methods of test for masonry units - Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units |
| EN 824-1994 | 建筑用绝热产品 垂直度的测定 | Thermal insulating products for building applications - Determination of squareness |
| EN 825-1994 | 建筑用绝隔热产品 平面度的测定 | Thermal insulating products for building applications - Determination of flatness |
| EN 994-1995 | 织物地面覆盖物 瓷砖边长、正方性和垂直度的测定 | Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
| GB/T 11337-2004 | 平面度误差检测 | Measurement of departures from flatness |
| GB/T 19367.2-2003 | 人造板板的垂直度和边缘直度的测定 | Wood-based panels--Determination of squareness and straightness of boards |
| GB/T 328.6-2007 | 建筑防水卷材试验方法 第6部分：沥青防水卷材 长度、宽度和平直度 | () |
| GB/T 328.7-2007 | 建筑防水卷材试验方法 第7部分：高分子防水卷材 长度、宽度、平直度和平整度 | () |
| GB/T 5480.2-2004 | 矿物棉及其制品试验方法第2部分:垂直度和平整度 | Test methods for mineral wool and its products--Part 2:Squareness and trueness |
| GB/T 7660.1-1987 | 反射棱镜光轴、光轴长度、光轴截面与光学平行度 | Reflecting prisms--Optical axis， length of optical axis，axial section and optical parallelism |
| GB/Z 18620.3-2002 | 圆柱齿轮检验实施规范第3部分:齿轮坯、轴中心距和轴线平行度 | Cylindrical gears--Code of inspection practice--Part 3:Recommendations relative to gear blanks，shaft centre distance and parallelism of axes |
| ISO 13747-1999 | 铺地织物 弹性砖边的尺寸、垂直度和平直度的测定 | Textile floor coverings - Determination of size, squareness and straightness of edge of tiles |
| ISO 1780-1984 | 电影 超8mmⅠ型电影摄影机胶片盒 片窗、摄影机片窗形式、胶片位置和压片板及压片板平直度 尺寸和规范 | Cinematography; Motion-picture camera cartridge, 8 mm Type S Model I; Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness; Dimensions and specifications |
| ISO 9008-1991 | 玻璃瓶 垂直度 试验方法 | Glass bottles; verticality; test method |
| ISO 9009-1991 | 玻璃容器 以容器底作基准的瓶口高度和不平行度 试验方法 | Glass containers; heigth and non-parallelism of finish with reference to container base; test methods |
| ISO 9366-2001 | 集成（凝聚）软木弹性地砖片 尺寸和边缘的平直度和垂直度的测定 | Agglomerated cork floor tiles - Determination of dimensions and deviation from squareness and from straightness of edges |
| ISO 9885-1991 | 广口玻璃容器 封合面顶部平面度偏差 试验方法 | Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods |
| ISO/TR 10064-3-1996 | 圆柱齿轮 实用检验规则 第3部分:轴心圆柱的齿轮坯料、轴心距和平行度的建议 | Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| ISO/TS 12780-1-2003 | 产品几何量技术规范(GPS).平直度.第1部分:平直度的词汇和参数 | Geometrical Product Specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness |
| ISO/TS 12780-2-2003 | 产品几何量技术规范(GPS).平直度.第2部分:规范操作人员 | Geometrical Product Specifications (GPS) - Straightness - Part 2: Specification operators |
| JB/T 7369-1994 | 机械密封端面平面度检验方法 | () |
| JB/T 7384.10-1994 | 紧固件 杆部销孔、头部销孔对称度、开槽螺母对称度及开口销孔垂直度检具 | () |
| JIS A1528-1997 | 门扇.尺寸和不垂直度的测量 戸の寸法と直角度の測定方法 | Door leaves -- Measurement of dimensions and of defects of squareness |
| NF E10-102-1988 | 尺寸测量方法.第3部份：平面度偏差 | (Dimensional measuring. Part 3 : flatness deviation.) |
| NF G35-051-1995 | 铺地纺织物.铺地砖边长和垂直度的测定 | (TEXTILE FLOOR COVERINGS. DETERMINATION OF THE SIDE LENGTH, SQUARENESS AND STRAIGHTNESS OF TILES. (EUROPEAN STANDARD EN 994).) |
| NF H35-005-1994 | 玻璃瓶.垂直度.试验方法 | (GLASS BOTTLES. VERTICALITY. TEST METHOD. (EUROPEAN STANDARD EN 29008).) |
| NF H35-007-1994 | 宽口玻璃仪器.顶部密封表面的平面度偏差.试验方法 | (WIDE-MOUTH GLASS CONTAINERS. DEVIATION FROM FLATNESS OF TOP SEALING SURFACE. TEST METHODS. (EUROPEAN STANDARD EN 29885).) |
| NF H44-018-1988 | 烟雾发生器.压力分配容器（气雾剂容器型）.２５．４mm孔径容器.平行度的定义和测定 | (AEROSOL DISPENSERS. CONTAINERS WITH A 25,4 MM OPENING. MEASUREMENT OF THE NECK PARALLELISM AND SURFACE EVENESS.) |
| NF P20-606-2000 | 门扉.高度、宽度、厚度和垂直度.公差级 | (Door leaves - Height, width, thickness and squareness - Tolerance classes.) |
| NF P62-103-1993 | 弹性地面覆盖物.片材宽度,长度,平直度和平整度测定 | (RESILIENT FLOORCOVERINGS. DETERMINATION OF WIDTH, LENGTH, STRAIGHTNESS AND FLATNESS OF SHEET MATERIAL. (EUROPEAN STANDARD EN 426).) |
| NF P62-104-1994 | 弹性地板覆层.砖的边长和垂直度的测定 | (RESILIENT FLOOR COVERINGS. DETERMINATION OF THE SIDE LENGTH, SQUARENESS AND STRAIGHTNESS OF TILES. (EUROPEAN STANDARD EN 427).) |
| NF P75-203-1994 | 建筑用隔热产品.垂直度的测定 | (THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF SQUARENESS. (EUROPEAN STANDARD EN 824).) |
| NF P75-204-1994 | 建筑用隔热产品.平面度的测定 | (THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF FLATNESS. (EUROPEAN STANDARD EN 825).) |
| NF P75-420-2002 | 建筑设备和工业设施用隔热制品.预制管绝缘层的尺寸、垂直度和线性度的测定 | (Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation.) |
| NF P84-127-1-1999 | 防水用柔性薄板.长度宽度和垂直度的测定.第1部分:屋顶防水用沥青片 | (Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1 : bitumen sheets for roof waterproofing.) |
| NF P84-127-2-2001 | 防水软板.长度、宽度和平直度的测定.第2部分:屋顶防水用塑料和橡胶薄板 | (Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2 : plastic and rubber sheets for roof waterproofing.) |
| prEN 3863-2001 | 航空航天系列 非金属材料、玻璃透明度 试验方法、平面度的测定 | Aerospace series - Non-metallic materials; Glass transparencies - Test methods; Determination of flatness |
| prEN 6000-1998 | 航空航天系列 AL-P2024-T351铝合金 板 6.0 mm≤a≤55 mm 紧公差平面度 | Aerospace series - Aluminium alloy AL-P2024-T351 - Plate - 6,0 mm a 55 mm - Close-tolerances flatness |
| prEN 6025-1998 | 航空航天系列 板材 AL-P2024铝合金 紧公差平面度 6 mm≤a≤55 mm 厚度 尺寸 | Aerospace series - Plates - Aluminium alloy 2024 - Close-tolerance flatness - Thickness 6 mm a 55 mm - Dimensions |
| QC/T 243-1997(2005) | 车轮安装面平面度要求及测试方法 | () |
| QC/T 243-2004 | 汽车车轮安装平面度要求及检验方法 | Performance requirements and test methods of automobile wheel's disc base planeness |
| 编号 | 中文名称 | 英文名称 |