| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI/ASME B30.1-2004 | 千斤顶 | Jacks |
| ASTM C 1196-2004 | 用液压千斤顶现场测量实心砌块抗压应力的标准试验方法 | Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements |
| ASTM C 1197-2004 | 用液压千斤顶法现场测量砖石建筑可变形性的标准试验方法 | Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method |
| ASTM D 4729-2004 | 使用扁千斤顶法现场测定变形的应力和模数的标准试验方法 | Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flatjack Method |
| BS 2C 12-1980 | 航空用千斤顶底板规范 | Specification for jacking pads for aircraft |
| BS 2M 50-1986 | 航空用三角架千斤顶间隙尺寸规范 | Specification for clearance dimensions for tripod jacks for aircraft |
| BS EN 12312-19-2005 | 飞行器地面支持设备.特殊要求.飞行器千斤顶、轴式千斤顶和液压机尾托架 | Aircraft ground support equipment - Specific requirements - Aircraft jacks, axle jacks, and hydraulic tail stanchions |
| BS EN 1494-2001 | 移动千斤顶和相关提升设备 | Mobile or movable jacks and associated lifting equipment |
| DIN 7355-1970 | 系列提升设备，起重器 | Serial lifting equipment, jacks |
| DIN ISO 43-1981 | 航空航天.飞机.千斤顶支板 | Aerospace; aircraft; jacking pads |
| EN 1494-2000 | 移动或可活动的千斤顶及有关升降设备 | Mobile or movable jacks and associated lifting equipment |
| GB/T 20340-2006 | 农业机械 农业挂车和被牵引设备 牵引杆千斤顶 | Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks |
| ISO 11530-1993 | 道路车辆 液压千斤顶 规范 | Road vehicles; hydraulic jacks; specifications |
| ISO 12140-1998 | 农业机械 农用挂车和被牵引设备牵引杆千斤顶 | Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks |
| ISO 1464-1985 | 航空航天 三脚千斤顶 间隙尺寸 | Aerospace; Tripod jacks; Clearance dimensions |
| ISO 43-1976 | 航空器千斤顶基座 | Aircraft jacking pads |
| ISO 8720-1991 | 乘用车 机械式千斤顶规范 | Passengers cars; specifications for mechanical jacks |
| JB/T 10687-2006 | 永磁起重器 | Permanent Magnetic Lifter |
| JB/T 2104-2002 | 油压千斤顶 | () |
| JB/T 2592-2008 | 螺旋千斤顶 | () |
| JB/T 3411.58-1999 | 千斤顶 尺寸 | () |
| JB/T 3411.59-1999 | 活头千斤顶 尺寸 | () |
| JB/T 5315-2008 | 车库用油压千斤顶 | () |
| JIS D8101-1994 | 汽车用便携式液压千斤顶 自動車用油圧式携行ジャッキ | Portable hydraulic jacks for automobiles |
| JIS D8101 AMD 1-2006 | 汽车用便携式液压千斤顶（修改件1） 自動車用油圧式携行ジャッキ（追補１） | Portable hydraulic jacks for automobiles (Amendment 1) |
| JIS D8102-1994 | 汽车用液压千斤顶 自動車用油圧式ガレージジャッキ | Hydraulic garage jacks for automobiles |
| JIS D8103-1994 | 汽车用便携式螺旋千斤顶 自動車用ねじ式携行ジャッキ | Portable screw jacks for automobiles |
| JIS D8103 AMD 1-2006 | 汽车用便携式螺旋千斤顶（修改件1） 自動車用ねじ式携行ジャッキ（追補１） | Portable screw jacks for automobiles (Amendment 1) |
| JIS W3901-1991 | 飞行器.千斤顶立架 航空機 ― ジャッキ受 | Aircraft -- Jacking pads |
| JIS W3902-1991 | 航空航天.三脚千斤顶.间隙尺寸 航空宇宙 ― 三脚ジャッキ ― すきま寸法 | Aerospace -- Tripod jacks -- Clearance dimensions |
| MT/T 985-2006 | 煤矿用立柱、千斤顶聚氨酯密封圈技术条件 | () |
| NF A82-150-1987 | 电阻焊接多点焊接机用无外壳千斤顶.一般规范 | (Electric resistance welding. Pneumatic cylinders without liners for multiple spot welding machines. General specifications.) |
| NF A82-160-1987 | 电阻焊接.多点焊接机用无外壳千斤顶.尺寸 | (Electric resistance welding. Pneumatic cylinders without liners for multiple spot welding machines. Sizes.) |
| NF E25-133-1987 | 紧固件.螺杆千斤顶用的金属螺钉.短六角头长制动端螺钉.Ａ和Ｂ级.符号ＨＺ | (Fasteners. Screws for screw-jacks. Small hexagon head screws with long dog point. Product grades A and B. Symbol HZ.) |
| NF E25-134-1987 | 紧固件.螺杆千斤顶用的金属螺钉.短方头短制动端螺钉.Ａ和Ｂ级.符号ＱＺ | (Fasteners. Screws for screw-jacks. Small square head screws with short dog point. Product grades A and B. Symbol QZ.) |
| NF E48-010-1984 | 液压传动.千斤顶.塞杆端部用内螺纹普通定位销和支座 | (Hydraulic fluid power. Cylinder. Fork yoke and tenon for extremity of piston rod.) |
| NF E48-025-1987 | 液压传动.250巴千斤顶.单杆.内径50到500mm.标牌和互换性尺寸 | (Hydraulic fluid power. 250 bar single-rod cylinders. Bore from 50 to 500 mm.) |
| NF E48-036-1984 | 液压传动.千斤顶.铸铁活塞环和活塞室公差和尺寸 | (HYDRAULIC FLUID POWER. CYLINDER. DIMENSIONS AND TOLERANCES OF CAST IRON PISTON RINGS AND OF THEIR HOUSINGS.) |
| NF E48-039-1987 | 液压传动.千斤顶.活塞导向环密封垫圈连接槽.尺寸 | (Hydraulic fluid power. Cylinders. Seal-incorporating bearing ring housing for pistons. Dimensions.) |
| NF E48-059-1991 | 液压和气压传动.起重器.活塞冲程的基本序列 | (Fluid power systems and components. Cylinders. Basic series of piston strokes.) |
| NF E48-060-1992 | 液压和气压传动.千斤顶.活塞杆的端头.螺纹:尺寸和类型 | (Fluid power. Cylinders. Piston rod thread dimensions and types.) |
| NF E48-503-1987 | 液压传动.千斤顶.160bar小型A千斤顶活塞杆端头的球头销定 | (HYDRAULIC FLUID POWER. CYLINDER. ROD END SPHERICAL EYE FOR 160 BAR SINGLE-ROD CYLINDER,COMPACT SERIE A.) |
| NF E49-030-1992 | 气压传动.单杆起重器.10bar系列(1000kPa).孔径为8-25mm.安装尺寸 | (Pneumatic fluid power. Single rod cylinders 10 bar (1000 kpa) series. Bores from 8 to 25 mm. Mounting dimensions.) |
| NF E52-051-1977 | 起重和装卸.齿条式千斤顶.名细表 | (LIFTING AND HANDLING. RACK JACKS. NOMENCLATURE.) |
| NF E52-205-1990 | 起重配附件.C型起重器件.性能 和试验 | (LIFTING ACCESSORIES. C-SHAPED LIFTING DEVICES. CHARACTERISTICS AND TESTS.) |
| NF F76-028-1974 | 铁路固定设备.手摇起轨千斤顶.特性 | (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. RAIL LIFTING JACKS WITH CRANK. CHARACTERISTICS.) |
| NF F76-029-1977 | 铁路固定设备.５吨力带扛杆起轨千斤顶.性能 | (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. LEVER-OPERATED 50 KN TRACK LIFTING JACKS. CHARACTERISTICS.) |
| NF L92-309-1988 | 航空.三脚架千斤顶.外廊尺寸 | (AEROSPACE. TRIPOD JACKS. CLEARANCE DIMENSIONS.) |
| NF L92-310-1977 | 液压千斤顶的支点 | (JACKING PADS.) |
| NF L92-313-1978 | 由千斤顶提升飞机用的活动球头铰链.ＩＳＯ米制螺纹剖面和BNAE公差 | (REMOVABLE AIRCRAFT JACKING PADS WITH METRIC ISO THREAD PROFILE AND BNAE TOLERANCES. (RECH.).) |
| NF L92-318-1978 | 由千斤顶飞机提升用活动球头关节.ＩＳＯ米制螺纹剖面和公差 | (REMOVABLE AIRCRAFT JACKING PADS WITH METRIC ISO THREAD PROFILE AND TOLERANCES.) |
| NF R63-105-2001 | 移动式千斤顶和相关升降设备 | (Mobile or movable jacks and associated lifting equipment.) |
| QC/T 585-1999(2005) | 轿车机械式千斤顶技术条件 | () |
| prEN 12312-19-1999 | 航空地面辅助设备 特殊要求 第19部分：飞机起重器、轴式起重器和液压尾柱 | Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
| 编号 | 中文名称 | 英文名称 |