发电机标准(Generator standards)

返回

编号中文名称英文名称
JB/T 10303-2001 工频柴油发电机组 技术条件 ()
ANSI/ANS 59.51-1997 应急柴油发电机的燃油系统 Fuel-Oil Systems for Emergency Diesel Generators
ANSI/ANS 59.52-1998 有关安全备用柴油发电机用润滑油系统 Lubricating Oil Systems for Safety Related Emergency Diesel Generators
ANSI/ASME PTC29-2005 水力涡轮发电机组的速度调节系统 Speed Governing Systems for Hydraulic Turbine Generators Units
ANSI/ASME PTC4.4-1981 燃气轮机热回收蒸汽发电机 Gas Turbine Heat Recovery Steam Generators
ANSI/ASTM A469-1994 用于发电机转子的真空处理钢锻件规范 Specification for Vacuum-Treated Steel Forgings for Generator Rotors
ANSI/ASTM D4248-1999 蒸汽涡轮发电机油路系统设计(05.02) Design of Steam Turbine Generator Oil Systems (05.02)
ANSI/ASTM F1134-1997 船用电动机和发电机绝缘电阻监测器规范 Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
ANSI/IEEE 1110-2002 电源系统稳定性分析中同步发电机建模规程和应用指南 Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses
ANSI/IEEE 122-1992 汽轮发电机组控制系统的功能性能特征的推荐规程 Recommended Practice for Functional Performance Characteristics of Control Systems for Steam Turbine Generator Units
ANSI/IEEE 125-1996 调节驱动发电机的水轮机速度用设备规范的编写备的推荐规程 Recommended Practice for Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators
ANSI/IEEE 1310-2004 大型发电机线绕定子棒和线圈的热循环试验推荐规程 Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Generators
ANSI/IEEE 387-1995 作为核电站备用电源的柴油发电机装置的标准准则 Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
ANSI/IEEE 492-1999 水力发电机运转和维护指南 Operation and Maintenance of Hydro-Generators, Guide for
ANSI/IEEE 67-2005 涡轮发电机的操作和维护指南 Guide for the Operation and Maintenance of Turbine Generators
ANSI/IEEE 810-1994 水轮机和发电机整体锻轴配合和轴公差标准 Standard for Hydraulic Turbine and Generator Integrally Forged Shaft Couplings and Shaft Tolerances
ANSI/IEEE C37.101-1993 发电机接地保护指南 Guide for Generator Ground Protection
ANSI/IEEE C37.102-1996 交流发电机保护指南 Guide for AC Generator Protection
ANSI/IEEE C50.12-2005 5MVA及以上水轮机设备用50和60赫兹凸极其同步发电机和发电机/电动机标准 Standard for Salient-Pole 50 and 60 Hz Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications Rated 5 MVA and Above
ANSI/IEEE C50.13-2005 10MVA及以上的50和60赫兹鼓形转子同步发电机标准 Standard for Cylindrical-Rotor 50 and 60 Hz, Synchronous Generators Rated 10 MVA and Above
ANSI/IEEE C57.116-1990 直接连于发电机的变压器指南 Guide for Transformers Directly Connected to Generators
ANSI/IEEE C62.92.2-1989 公用电力系统中线接地应用指南.第2部分:同步发电机系统电涌保护器件的接地 Application Guide for Neutral Grounding in Electric Utility Systems - Part 2 - Grounding of Synchronous Generator Systems Surge Protective Devices
ANSI/IEEE C62.92.3-1993 发电机辅助系统中性接地应用指南 Applicaton Guide for Neutral Grounding of Generator Auxiliary Systems
ANSI/NECA 406-2003 住宅用发电机组安装的推荐规程 Recommended Practice for Installing Residential Generator Sets
ANSI/NECA 90-2004 住宅发电机组的安装推荐实施规程 Recommended Practice for Installing Residential Generator Sets
ANSI/NECA/EGSA 404-2000 安装发电机组的推荐规程 Recommended Practice for Installing Generator Sets
ANSI/NEMA MG1, Revision 1-2003 电动机和发电机 Motors and Generators
ANSI/RVIA EGS-1-2003 游乐车辆发动机的发电机组 Engine Generator Sets for Recreational Vehicles
ANSI/UL 1236-2006 装载发电机启动器蓄电池用蓄电池充电器的安全标准 Standard for Safety for Battery Chargers for Charging Engine-Starter Batteries
ANSI/UL 2200-2004 固定式发动机驱动型发电机组件的安全标准 Standard for Safety for Stationary Engine Generator Assemblies
ANSI/UL 674-2003 I类C、D组和Ⅱ类E、F、G组危险场所用电动机和发电机 Electric Motors and Generators for Use in Hazardous Locations, Class I Groups C and D, Class II Groups E, F and G
ASME PTC 20.1-1977 汽轮发电机组的速度和负载调节系统 (Speed and load governing systems for steam turbine-generator units)
ASME PTC 20.2-1965 汽轮发电机组用超速自动分离系统 (Overspeed trip systems for steam turbine-generator units)
ASME PTC 20.3-1970 汽轮发电机组用压力控制系统 (Pressure control systems used on steam turbine-generator units)
ASME PTC 26-1962 内燃发电机组的速度调节系统 (Speed-governing systems for internal combustion engine-generator units)
ASME PTC 29-1965 液压汽轮发电机组的速度调节系统 (Speed-governing systems for hydraulic turbine-generator units)
ASTM A 288-1991 涡轮发电机磁性定位环用碳素钢和合金钢锻件 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
ASTM A 289/A 289M-1997 发电机用无磁档圈用合金钢锻件的标准规范 Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
ASTM A 418/A 418M-2005 涡轮机及发电机钢转子锻件超声波检验的标准试验方法 Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
ASTM A 469/A 469M-2006 发电机转子用真空处理钢锻件的标准规范 Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
ASTM A 531/A 531M-1991 涡轮发电机钢定位环的超声波检验 Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
ASTM D 4241-1998f 气体涡轮发电机润滑油系统设计的标准实施规范 Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems
ASTM D 4248-1998 蒸气涡轮发电机润滑油系统设计的标准实施规范 Standard Practice for Design of Steam Turbine Generator Oil Systems
ASTM D 4286-1990 核动力发电机装置涂覆承包人的资格鉴定 Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities
ASTM D 6794-2002 测定用不同水和长时间(6h)加热后对的发电机油渗透性影响的标准试验方法 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time
ASTM D 6795-2002 测定用水、干冰和短时间(30min)加热后对发电机油渗透性影响的标准试验方法 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time
ASTM F 1134-1994 船用电动机和发电机绝缘电阻监测器 Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
BS 2G 124-1-1966 飞机交流发电机规范.恒定频率 Specification for a.c. generators for aircraft - Constant frequency
BS 2G 124-2-1966 飞机交流发电机规范.第2部分:变频 Specification for a.c. generators for aircraft - Variable frequency
BS 2G 134-1970 直流发电机规范 Specification for d.c. generators
BS 4999-140-1987 旋转电机一般要求.第140部分:交流同步发电机电压调节和并联运行规范 General requirements for rotating electrical machines - Specification for voltage regulation and parallel operation of a.c. synchronous generators
BS 5000-11-1973 特种或专用旋转电机.第11部分:小功率电动机和发电机 Specification for rotating electrical machines of particular types or for particular applications - Small-power electric motors and generators
BS 5000-3-1980 特种或专用旋转电机规范.第3部分:往复式内燃机驱动发电机 Specification for rotating electrical machines of particular types or for particular applications - Generators to be driven by reciprocating internal combustion engines
BS 7698-10-1999 往复式内燃机驱动交流发电机组.用包络表面法对空气中噪音进行测定 Reciprocating internal combustion engine driven alternating current generating sets - Measurement of airborne noise by the enveloping surface method
BS 7698-7-1996 往复式内燃机驱动的交流发电机组.规范和设计的技术申报 Reciprocating internal combustion engine driven alternating current generating sets - Technical declarations for specification and design
BS 7698-8-1996 往复式内燃机驱动的交流发电机组.低功率发电机组要求和试验 Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets
BS 7698-9-1996 往复式内燃机驱动的交流发电机组.机械振动的测量和评估 Reciprocating internal combustion engine driven alternating current generating sets - Measurement and evaluation of mechanical vibrations
BS AU 227-1988 商用车辆和公共汽车交流发电机圆轴端头和轮毂尺寸规范 Specification for dimensions of cylindrical shaft ends and hubs for alternators for commercial vehicles and buses
BS AU 232-1989 装有调节器的道路车辆交流发电机的试验和一般要求方法 Methods of test and general requirements for road vehicle alternators with regulators
BS AU 250-1993 商业车辆和公共汽车1、2和3 型交流发电机安装尺寸规范 Specification for mounting dimensions of alternators, types 1, 2 and 3 for commercial vehicles and buses
BS EN 12601-2001 往复式内燃引擎驱动的发电机组.安全性 Reciprocating internal combustion engine driven generating sets - Safety
BS EN 45510-2-6-2000 发电站设备采购指南.电气设备.发电机.第6节:发电机 Guide for the procurement of power station equipment - Electrical equipment - Generators - Section 6: Generators
BS EN 60034-22-1998 旋转电机.往复式内燃机(RIC)引擎驱动交流发电机. Rotating electrical machines - A.C. generators for reciprocating internal combustion (RIC) engine driven generating sets
BS EN 60601-2-7-1998 医用电气设备.安全性专门要求.X射线诊断装置的高压发电机规范 Medical electrical equipment - Particular requirements for safety - Specification for high voltage generators of diagnostic X-ray generators
BS EN 61400-11-2003 风力涡轮发电机系统.噪音测量技术 Wind turbine generator systems - Acoustic noise measurement techniques
BS EN 61400-21-2002 风轮发电机系统.网格连接风轮机的动力质量特性的测量和评定 Wind turbine generator systems - Measurement and assessment of power quality characteristics of grid connected wind turbines
BS EN 88528-11-2004 往复式内燃机驱动交流发电机组.旋转不间断电力系统.性能要求和试验方法 Reciprocating internal combustion engine driven alternating current generating sets - Rotary uninterruptible power systems - Performance requirements and test methods
BS IEC 60092-301-2002 船上电气装置.设备.发电机和电动机 Electrical installation in ships - Equipment - Generators and motors
BS ISO 10816-2-2002 机械振动.通过对非旋转部件的测量评定机械振动.标称运行速度为1500r/min、1800r/min、3000r/min和3600r/min Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
BS ISO 7919-2-2002 非往复式机器的机械振动.旋转轴的测量和评定标准.陆地安装,功率超过50MW,正常运转速度为1500r/min、1800r/m Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
BS ISO 8528-1-2006 往复式内燃机驱动的交流发电机组.应用、额定功率和性能 Reciprocating internal combustion engine driven alternating current generating sets - Application, ratings and performance
BS ISO 8528-3-2006 往复式内燃机驱动的交流发电装置.发电机组的交流发电机 Reciprocating internal combustion engine driven alternating current generating sets - Alternating current generators for generating sets
DD ENV 61400-1-1995 风力涡轮发电机系统.第1部分:安全性要求 Wind turbine generator systems. Safety requirements
DIN 14685-1996 5KVA和5KVA便携式发电机 Portable generating set 5 kVA and 8 kVA
DIN 14686-2003 消防车辆上固定式发电机的开关柜 Switch cabinets for fixed generators 12 kVA in fire-brigade vehicles
DIN 43675-3-1975 第3部分:交流发电机套管额定值大于 3150 A 的连接螺栓用矩形断面连接器 Rectangular-section connectors for terminal studs rated over, 3150 A, for alternator-bushings
DIN 43675-4-1977 额定电流10KA以上交流发电机接线螺柱用八角连接器 Octagon connectors for terminal studs, rated over 10000 A, for alternator-bushings
DIN 45635-15-1987 机器空气噪声的测量.包络面法.热电站用的涡轮发电机组 Measurement of airborne noise emitted by machines; enveloping surface method; turbogenerator sets for use in thermal power stations
DIN 48124-1-1980 第1部分:氢冷式发电机用自然冷却套管 Natural cooled bushings for hydrogen cooled generators
DIN 48124-2-1980 第2部分:氢冷式发电机用液体冷却套管 Liquid cooled bushings for hydrogen cooled generators
DIN 48124-3-1980 第3部分:氢冷式发电机用气体冷却套管 Gas cooled bushings for hydrogen cooled generators
DIN 6280-10-1986 活塞式内燃机:带活塞内燃机的发电机组:第10部分:小功率发电机组要求与试验 Reciprocating internal combustion engines; generating sets with reciprocating internal combustion engines; small power generating sets; requirements and tests
DIN 6280-12-1996 发电机组.连续供电.第12部分:带和不带活塞式内燃机的动力USV设备 Generating sets - Uninterruptible power supply - Part 12: Dynamic UPS systems with and without reciprocating internal combustion engines
DIN 6280-13-1994 发电机组.活塞式内燃机驱动的发电机组.第13部分:医院和公共建筑物的应急安全供电 Generating sets - Reciprocating internal combustion engines driven generating sets - Part 13: For emergency power supply in hospitals and public buildings
DIN 6280-14-1997 发电机组.活塞式内燃机驱动的发电机组.第14部分:活塞式内燃机驱动的综合热电厂.基础、要求、组合部件、结构 Generating sets - Reciprocating internal combustion engines driven generating sets - Part 14: Combined heat and power system (CHPS) with reciprocating internal combustion engines; basics, requirements, components and application
DIN 6280-15-1997 发电机组.活塞式内燃机驱动的发电机组.第15部分:活塞式内燃机驱动的综合热电厂.试验 Generating sets - Reciprocating internal combustion engines driven generating sets - Part 15: Combined heat and power system (CHPS) with reciprocating internal combustion engines; tests
DIN 6281-1978 往复式内燃机的发电机组;发电机与往复式内燃机的连接尺寸 Generator Sets with Reciprocating Internal Combustion Engines; Connection Dimensions for Generators and Reciprocating Internal Combustion Engines
DIN EN 12601-2001 往复式内燃机驱动发电机组.安全性 Reciprocating internal combustion engine driven generating sets - Safety; German version EN 12601:2001
DIN EN 45510-2-6-2001 发电厂设备采购指南.第2-6部分:电气设备.发电机 Guide for procurement of power station equipment - Part 2-6: Electrical equipment; Generators; German version EN 45510-2-6:2000
DIN EN 60034-22-1998 旋转电机.第22部分:往复式内燃机驱动的发电机组用交流发电机 Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets (IEC 60034-22:1996); German version EN 60034-22:1997
DIN EN 61400-11-2003 风力涡轮机发电机系统.第11部分:噪音测量技术 Wind turbine generator systems - Part 11: Acoustic noise measurement techniques (IEC 61400-11:2002); German version EN 61400-11:2003
DIN EN 61400-12-1999 风涡轮发电机组.第12部分:风涡轮机动力特性测试 Wind turbine generator systems - Part 12: Wind turbines power performance testing (IEC 61400-12:1998); German version EN 61400-12:1998
DIN EN 61400-2-1998 风力涡轮发电机组.第2部分:小型风力涡轮发电机安全性 Wind turbine generator systems - Part 2: Safety of small wind turbines (IEC 61400-2:1996); German version EN 61400-2:1996
DIN EN 61400-21-2002 鼓风涡轮发电机系统.第21部分:网格连接式鼓风涡轮机动力质量特性的测量和评估 (IEC 61400-21:2001); 德文版 Wind turbine generator systems - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines (IEC 61400-21:2001); German version EN 61400-21:2002
DIN EN 88528-11-2005 往复式内燃机驱动交流发电机组.第11部分:旋转不间断电力系统.性能要求和试验方法 Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods (IEC 88528-11:2004); German version EN 88528-11:2004
DIN ISO 10816-2-2002 机械振动.通过测量非旋转部件评定机械振动.第2部分:标定运行速度1500r/min、1800r/min、3000r/min和3600r/m Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 10816-2:2001)
DIN ISO 7467-1989 商用车辆和客车.交流发电机圆柱轴端和轮毂 Commercial vehicles and busses; cylindrical shaft ends and hubs for alternators; identical with ISO 7467:1987
DIN ISO 7651-1993 商用车辆和客车,1.2.3型交流发电机的安装尺寸 Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3; identical with ISO 7651:1991
DIN ISO 7919-2-2002 机械振动.通过测量旋转轴评定机械振动.第2部分:标定运行速度1500r/min、1800r/min、3000r/min和3600r/min的 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 7919-2:2001)
DIN ISO 8528-7-1997 往复式内燃交流发电机组.第7部分:设计规范和技术说明 Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design (ISO 8528-7:1994)
DIN ISO 8528-9-1999 往复式内燃机驱动的交流发电机组.第9部分:机械振动的测量和评估 Reciprocating internal combustion engines driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations (ISO 8528-9:1995)
DIN V VDE V 0126-1-1-2006 发电机和公共低压电网之间的自动断开设备 Automatic disconnection device between a generator and the public low-voltage grid
DIN VDE 0100-551-1997 建筑物的电气设施.第5部分:电气设备的选择和安装.第55章:其它设备.第551节:低压发电机组 Electrical installations of buildings - Part 5: Selection and erection of electrical equipment; Chapter 55: Other equipment; Section 551: Low-voltage generating sets (IEC 60364-5-551:1994); German version HD 384.5.551 S1:1997
DL 427-1991(2005) 户内型发电机断路器订货技术条件 ()
DL 490-1992(2005) 大中型水轮发电机静止整流励磁系统及装置安装、验收规程 ()
DL/T 1003-2006 水轮发电机组推力轴承润滑参数测量方法 ()
DL/T 1013-2006 大中型水轮发电机微机励磁调节器试验与调整导则 ()
DL/T 1031-2006 运行中发电机用油质量标准 Quality standard of generator oils in service
DL/T 1039-2007 发电机内冷水处理导则 Directive for electric power generator inner cooling water treatment
DL/T 1049-2007 发电机励磁系统技术监督规程 Guideline of generator excitation system supervision
DL/T 1067-2007 蒸发冷却水轮发电机(发电/电动机)基本技术条件 Fundamental technical specifications for evaporative cooling hydrogenerator (generator/motor)
DL/T 443-1991(2005) 水轮发电机组设备出厂检验一般规定 ()
DL/T 489-2006 大中型水轮发电机静止整流励磁系统及装置试验规程 ()
DL/T 491-1999 大中型水轮发电机静止整流励磁系统及装置运行、检修规程 ()
DL/T 492-1992(2005) 发电机定子绕组环氧粉云母绝缘老化鉴定导则 ()
DL/T 5038-1994(2005) 灯泡贯流式水轮发电机组安装工艺导则 ()
DL/T 507-2002 水轮发电机组起动试验规程 ()
DL/T 5113.11-2005 水电水利基本建设工程 单元工程质量等级评定标准 第11部分:灯泡贯流式水轮发电机组安装工程 ()
DL/T 556-1994(2005) 水轮发电机组振动监测装置设置导则 ()
DL/T 583-2006 大中型水轮发电机静止整流励磁系统及装置技术条件 ()
DL/T 591-1996(2005) 火力发电厂汽轮发电机的热工检测控制技术导则 ()
DL/T 607-1996(2005) 汽轮发电机漏水、漏氢的检验 ()
DL/T 622-1997(2005) 立式水轮发电机弹性金属塑料推力轴瓦技术条件 ()
DL/T 650-1998(2005) 大型汽轮发电机自并励静止励磁系统技术条件 ()
DL/T 651-1998(2005) 氢冷发电机氢气湿度的技术要求 ()
DL/T 671-1999 微机发电机变压器组保护装置通用技术条件 ()
DL/T 684-1999 大型发电机变压器继电保护整定计算导则 ()
DL/T 705-1999 运行中氢冷发电机用密封油质量标准 ()
DL/T 717-2000 汽轮发电机组转子中心孔检验技术导则 ()
DL/T 730-2000 进口水轮发电机(发电/电动机)设备技术规范 ()
DL/T 735-2000 大型汽轮发电机定子绕组端部动态特性的测量及评定 ()
DL/T 751-2001 水轮发电机运行规程 ()
DL/T 801-2002 大型发电机内冷却水质及系统技术要求 ()
DL/T 817-2002 立式水轮发电机检修技术规程 ()
DL/T 827-2002 灯泡贯流式水轮发电机组起动试验规程 ()
DL/T 843-2003 大型汽轮发电机交流励磁机励磁系统技术条件 ()
DL/T 851-2004 联合循环发电机组验收试验 ()
DL/T 873-2004 微机型发电机变压器组动态记录装置技术条件 ()
DL/T 912-2005 超临界火力发电机组水汽质量标准 ()
DL/T 970-2005 大型汽轮发电机非正常和特殊运行及维护导则 ()
EN 12601-2001 活塞式内燃机驱动的发电机组 安全 Reciprocating internal combustion engine driven generating sets - Safety
EN 226-1987 雾化油燃烧器 燃烧器和热发电机间的连接尺寸 Atomizing oil burners. Connecting dimensions between burners and heat generators
EN 45510-2-6-2000 发电站设备的采购指南 第2-6部分:电气设备 发电机 Guide for procurement of power station equipment - Part 2-6: Electrical equipment - Generators
EN 60034-22-1997 旋转电机 第22部分:往复式内燃机(RIC)驱动的发电机组用交流发电机 Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets (IEC 60034-22:1996)
EN 61400-11-2003 风轮发电机系统 第11部分:噪音测量技术 Wind turbine generator systems - Part 11: Acoustic noise measurement techniques (IEC 61400-11:2002) / Note: Endorsement notice
EN 61400-12-1998 风轮发电机系统 第12部分:风轮机动力性能试验 Wind turbine generator systems - Part 12: Wind turbines power performance testing (IEC 61400-12:1998)
EN 61400-2-1996 风轮发电机系统 第2部分:小型风轮机的安全 Wind turbine generator systems - Part 2: Safety of small wind turbines (IEC 61400-2:1996)
EN 61400-21-2002 风轮发电机系统 第21部分:栅格连接的风力涡轮机动力质量特性的测量和评估 Wind turbine generator systems - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines (IEC 61400-21:2001)
EN 61922-2002 高频感应加热装置 测定发电机功率输出的试验方法 High-frequency induction heating installations - Test methods for the determination of power output of the generator (IEC 61922:2002) / Note: Endorsement notice
ENV 61400-1-1995 风轮发电机系统 第1部分:安全要求 Wind turbine generator systems - Part 1: Safety requirements (IEC 61400-1:1994)
GB 17646-1998 小型风力发电机组安全要求 Safety of small wind turbine generator systems
GB 18451.1-2001 风力发电机组安全要求 Wind turbine generator systems--Safety requirements
GB/T 10760.1-2003 离网型风力发电机组用发电机第1部分:技术条件 Generator of off-grid wind turbines generator system--Part 1: Technical condition
GB/T 10760.2-2003 离网型风力发电机组用发电机第2部分: 试验方法 Generator of off-grid wind turbines generator system--Part 2: Testing method
GB/T 11348.2-2007 旋转机械转轴径向振动的测量和评定 第2部分: 50MW以上,额定转速1500r/min、1800r/min、3000r/min、3600r/mi ()
GB/T 11805-1999 水轮发电机组自动化元件(装置)及其系统基本技术条件 Basic specifications of automatic control components (devices) and their related system forhydroturbine-generating sets
GB/T 12145-1999 火力发电机组及蒸汽动力设备水汽质量 Quality criterion of water and steam for generating unit and steam power equipment
GB/T 12975-1991 船用同步发电机通用技术条件 General specification for synchronous generator in ship
GB/T 13032-1991 船用柴油发电机组通用技术条件 General specification for marine diesel generator set
GB/T 13633-1992 永磁式直流测速发电机通用技术条件 Permanent magnet D.C. tachogenerator--General specification
GB/T 14824-1993 发电机断路器通用技术条件 Common technical requirements for generator circuit-breaker
GB/T 15548-1995 往复式内燃机驱动的三相同步发电机通用技术条件 General specification forthree-phase synchronous generator driven by reciprocating internal combustion engine
GB/T 18451.2-2003 风力发电机组功率特性试验 Wind turbine generator systems--Wind turbine power performance testing
GB/T 19068.1-2003 离网型风力发电机组第1部分:技术条件 Off-grid wind turbine generatorsystem--Part 1: Technical condition
GB/T 19068.2-2003 离网型风力发电机组第2部分: 试验方法 Off-grid wind turbine generatorsystem--Part 2: Test method
GB/T 19068.3-2003 离网型风力发电机组第3部分: 风洞试验方法 Off-grid wind turbine generator system--Part 3: Wind tunnel test methods
GB/T 19069-2003 风力发电机组控制器技术条件 Technical condition for electrical controller of wind turbine generator systems
GB/T 19070-2003 风力发电机组控制器试验方法 Test method for electrical controller of wind turbine generator systems
GB/T 19071.1-2003 风力发电机组异步发电机第1部分:技术条件 Asynchronous generator forwind turbine generator systems--Part 1: Technical condition
GB/T 19071.2-2003 风力发电机组异步发电机第2部分: 试验方法 Asynchronous generator forwind turbine generator systems--Part 2: Test method
GB/T 19072-2003 风力发电机组塔架 Tower of wind turbine generator system
GB/T 19073-2003 风力发电机组齿轮箱 Gearbox of wind turbine generator system
GB/T 19568-2004 风力发电机组装配和安装规范 Assembling and installation regulation for wind turbine generator systems
GB/T 19960.1-2005 风力发电机组 第1部分:通用技术条件 Wind turbine generator system Part 1: Technology condition
GB/T 19960.2-2005 风力发电机组 第2部分:通用试验方法 wind turbine generator systemPart2:Test methods
GB/T 20140-2006 透平型发电机定子绕组端部动态特性和振动试验方法及评定 Dynamic characteristic and vibration measurement method of turbo-generators on stator windings and evaluation criteria
GB/T 20319-2006 风力发电机组 验收规范 Code for acceptance of Wind turbines generator systems
GB/T 20320-2006 风力发电机组电能质量测量和评估方法 Measurement and assessment of Power quality characteristicsof Wind turbine generator system
GB/T 20835-2007 发电机定子铁心磁化试验导则 ()
GB/T 2820.1-1997 往复式内燃机驱动的交流发电机组第1部分:用途、定额和性能 Reciprocatinginternal combustion engine driven alternating current generating sets--Part 1:Application,ratings and performance
GB/T 2820.10-2002 往复式内燃机驱动的交流发电机组第10部分:噪声的测量(包面法) Reciprocating internal combustion engine driven alternating current generating sets--Part 10:Measurement of airborne noise by the enveloping surface method
GB/T 2820.12-2002 往复式内燃机驱动的交流发电机组第12部分:对安全装置的应急供电 Reciprocating internal combustion engine driven alternating current generating sets--Part 12:Emergency power supply to safety services
GB/T 2820.2-1997 往复式内燃机驱动的交流发电机组第2部分:发动机 Reciprocating internal combustion engine driven alternating current generating sets--Part 2:Engines
GB/T 2820.3-1997 往复式内燃机驱动的交流发电机组第3部分:发电机组用交流发电机 Reciprocating internal combustion engine driven alternating current generating sets--Part 3:Alternating current generators for generating sets
GB/T 2820.4-1997 往复式内燃机驱动的交流发电机组第4部分:控制装置和开关装置 Reciprocating internal combustion engine driven alternating current generating sets--Part 4:Controlgear and switchgear
GB/T 2820.5-1997 往复式内燃机驱动的交流发电机组第5部分:发电机组 Reciprocating internal combustion engine driven alternating current generating sets--Part 5:Generating sets
GB/T 2820.6-1997 往复式内燃机驱动的交流发电机组第6部分:试验方法 Reciprocating internal combustion engine driven alternating current generating sets--Part 6:Test methods
GB/T 2820.7-2002 往复式内燃机驱动的交流发电机组第7部分:用于技术条件和设计的技术说明 Reciprocating internal combustion engine driven alternating current generating sets--Part 7:Technical declarations for specification and design
GB/T 2820.8-2002 往复式内燃机驱动的交流发电机组第8部分:对小功率发电机组的要求和试验 Reciprocating internal combustion engine driven alternating current generating sets--Part 8:Requirements and tests for low-power generating sets
GB/T 2820.9-2002 往复式内燃机驱动的交流发电机组第9部分:机械振动的测量和评价 Reciprocating internal combustion engine driven alternating current generating sets--Part9:Measurement and evaluation of mechanical vibrations
GB/T 2900.53-2001 电工术语风力发电机组 Electrotechnical terminology--Wind turbine generator systems
GB/T 4712-1996 自动化柴油发电机组分级要求 Automatic diesel generating set,requirements of classification
GB/T 4997-1993 永磁式低速直流测速发电机通用技术条件 Permanent magnet low speed directcurrent tacho-generator, General specification for
GB/T 6075.2-2007 在非旋转部件上测量和评价机器的机械振动 第2部分: 50MW以上,额定转速1500r/min、1800r/min、3000r/min、36 ()
GB/T 7409.3-2007 同步电机励磁系统 大、中型同步发电机励磁系统技术要求 ()
GB/T 7441-1987 电站汽轮发电机组噪声测量方法 Noise measurement method for the power plant turbine generator
GB/T 7894-2001 水轮发电机基本技术条件 Fundamental technical specifications for hydro generators
GB/T 8564-2003 水轮发电机组安装技术规范 Specification installation of hydraulic turbine generator units
IEC 60034-22-1996 旋转电机 第22部分:往复式内燃机驱动的发电机组用交流发电机 Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
IEC 60050-415-1999 国际电工词汇 第415部分:风轮发电机系统 International Electrotechnical Vocabulary - Part 415: Wind turbine generator systems
IEC 60092-301 AMD 1-1994 船舶电气设施 第301部分:设备 发电机和电动机 修改1 Electrical installations in ships - Part 301: Equipment - Generators and motors; Amendment 1
IEC 60092-301 AMD 2-1995 船舶电气设施 第301部分:设备 发电机和电动机 修改2 Electrical installations in ships - Part 301: Equipment - Generators and motors; Amendment 2
IEC 60092-301-1980 船舶电气设施 第301部分:设备 发电机和电动机 Electrical installations in ships. Part 301 : Equipment - Generators and motors
IEC 60364-5-55 AMD 1-2001 建筑物的电气设施 第5部分:电气设备的选择和安装 第55章:其他设备 第551节:低压发电机组 修改1 Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment; Other equipment; Amendment 1
IEC 61400-1-2005 风涡轮发电机组.第1部分:设计要求 Wind turbines - Part 1: Design requirements
IEC 61400-11 AMD 1-2006 风轮发电机系统.第11部分:噪音测量技术.修改件1 Wind turbine generator systems - Part 11: Acoustic noise measurement techniques; Amendment 1
IEC 61400-11-2002 风轮发电机系统.第11部分:噪音测量技术 Wind turbine generator systems - Part 11: Acoustic noise measurement techniques
IEC 61400-21-2001 风轮发电机系统 第21部分:管道连接风轮机功率质量特性的测量和评定 Wind turbine generator systems - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines
IEC 88528-11-2004 往复式内燃机驱动交流发电机组.第11部分:旋转的不间断电力系统.性能要求和试验方法 Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods
IEC/TR 61400-24-2002 风力涡轮机发电机系统.第24部分:避雷装置 Wind turbine generator systems - Part 24: Lightning protection
IEC/TS 61400-13-2001 风轮发电机系统 第13部分:机械负载的测量 Wind turbine generator systems - Part 13: Measurement of mechanical loads
IEC/TS 61400-23-2001 风轮发电机系统 第23部分:转子叶片的全尺寸比例结构试验 Wind turbine generator systems - Part 23: Full-scale structural testing of rotor blades
IEEE 1095-1989 水电用立式发电机和发电机/电动机安装指南 (Guide for installation of vertical generators and generator/motors for hydroelectric applications)
IEEE 112-1996 多相感应电动机及发电机的试验规程 (Test procedure for polyphase induction motors and generators)
IEEE 1129-1992 涡轮发电机监测仪表用推荐规范 (Recommended practice for monitoring and instrumentation of turbine generators)
IEEE 1193-1994 发电机频率对环境影响的测量标准 (Measurement of environmental sensitivities of standard frequency generators)
IEEE 122-1991 汽轮机发电机组控制系统功能与性能特征的推荐规程 (Recommended practice for functional and performance characteristics of control systems for steam turbine-generator units)
IEEE 1310-1996 大型发电机用模绕定子棒和模绕线圈的热循环试验 (Thermal cycle testing of form-wound stator bars and coils for large generators)
IEEE 1553-2002 水轮发电机用模绕线圈和棒的电压耐久性试验 (Voltage-endurance testing of form-wound coils and bars for hydrogenerators)
IEEE 387-1995 用作核电站备用电源的柴油发电机组准则 (Criteria for diesel-generator units applied as standby power supplies for nuclear power generating stations)
IEEE 67-1990 涡轮发电机操作和维护指南 (Guide for operation and maintenance of turbine generators)
IEEE C 37.013-1997 基于平衡电流的交流高压发电机断路器 (AC high-voltage generator circuit breakers rated on a symmetrical current basis)
IEEE C 37.101-1993 发电机接地保护指南 (Guide for generator ground protection)
IEEE C 37.102-1995 交流发电机保护指南 (Guide for ac generator protection)
IEEE C 57.116-1989 同发电机直接相连的变压器指南 (Guide for transformers directly connected to generators)
IEEE C 62.92.2-1989 电力事业系统中性接地应用指南.第二部分:同步发电机系统接地 (Guide for the application of neutral grounding in electrical utility systems; part 2: grounding of synchronous generator systems)
IEEE C 62.92.3-1993 电力事业系统中性接地应用指南.第三部分:发电机辅助系统 (Guide for the application of neutral grounding in electrical utility systems - Part 3: Generator auxiliary systems)
ISO 10816-2 Technical Corrigendum 1-2004 机械振动.通过在非旋转部件上的测量评价机械振动.第2部分:超过50MW功率的标准操作速度为1500 r/min、1800 r Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min; Technical Corrigendum 1
ISO 10816-2-2001 机械振动 用非旋转部件上的测量评定机器振动 第2部分:功率超过50MW、额定转速在1500r/min、1800r/min、3 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
ISO 14617-11-2002 图表用图形符号.第11部分:热传递装置和热发电机 Graphical symbols for diagrams - Part 11: Devices for heat transfer and heat engines
ISO 7651-1991 商用车辆和公共汽车 1、2、3型交流发电机安装尺寸 Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3
ISO 7919-2-2001 机械振动 用旋转轴的测量评定机械振动 第2部分:功率超过50MW、额定转速在1500r/min、1800 r/min、3000 r Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
ISO 8528-1-2005 往复式内燃交流发电机组.第1部分:用途、定额及性能 Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance
ISO 8528-10-1998 往复式内燃交流发电机组 第10部分:包络面法测量空气噪声 Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise by the enveloping surface method
ISO 8528-12-1997 往复式内燃交流发电机组 第12部分:应急发电设备 Reciprocating internal combustion engine driven alternating current generating sets - Part 12: Emergency power supply to safety services
ISO 8528-2-2005 往复式内燃交流发电机组 第2部分:发动机 Reciprocating internal combustion engine driven alternating current generating sets - Part 2: Engines
ISO 8528-3-2005 往复式内燃机驱动的交流发电机组.第3部分:发电机组用交流发电机 Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets
ISO 8528-4-2005 往复式内燃交流发电机组.第4部分:控制装置与开关装置 Reciprocating internal combustion engine driven alternating current generating sets - Part 4: Controlgear and switchgear
ISO 8528-5-2005 往复式内燃机驱动的交流发电机组.第5部分:发电机组 Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
ISO 8528-6-2005 往复式内燃交流发电机组.第6部分:试验方法 Reciprocating internal combustion engine driven alternating current generating sets - Part 6: Test methods
ISO 8528-7-1994 往复式内燃交流发电机组 第7部分:技术规格和设计说明 Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design
ISO 8528-8-1995 往复式内燃交流发电机组 第8部分:小功率发电机组技术要求和试验 Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets
ISO 8528-9-1995 往复式内燃交流发电机组 第9部分:机械振动的测量和评定 Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibration
ISO 8854-1988 道路车辆 带调节器的交流发电机 试验方法和一般要求 Road vehicles; alternators with regulators; test methods and general requirements
JB/T 10134-1999 带真空泵交流发电机 技术条件 ()
JB/T 10180-2000 水轮发电机推力轴承弹性金属塑料瓦技术条件 ()
JB/T 10194-2000 风力发电机组风轮叶片 ()
JB/T 10265-2001 水轮发电机用上下圆盘锻件技术条件 ()
JB/T 10300-2001 风力发电机组 设计要求 ()
JB/T 10304-2001 工频汽油发电机组 技术条件 ()
JB/T 10326-2002 在役发电机护环超声波检验技术标准 ()
JB/T 10392-2002 透平发电机定子铁心、机座模态试验分析和振动测量方法及评定 ()
JB/T 10395-2004 离网型风力发电机组安装规范 ()
JB/T 10396-2004 离网型风力发电机组可靠性要求 ()
JB/T 10397-2004 离网型风力发电机组验收规范 ()
JB/T 10399-2004 离网型风力发电机组风轮叶片 ()
JB/T 10400.1-2004 离网型风力发电机组用齿轮箱 第1部分:技术条件 ()
JB/T 10400.2-2004 离网型风力发电机组用齿轮箱 第2部分:试验方法 ()
JB/T 10401.1-2004 离网型风力发电机组制动系统 第1部分:技术条件 ()
JB/T 10401.2-2004 离网型风力发电机组 制动系统 第2部分:试验方法 ()
JB/T 10402.1-2004 离网型风力发电机组偏航系统 第1部分:技术条件 ()
JB/T 10402.2-2004 离网型风力发电机组偏航系统 第2部分:试验方法 ()
JB/T 10403-2004 离网型风力发电机组塔架 ()
JB/T 10405-2004 离网型风力发电机组基础与联接 技术条件 ()
JB/T 10415.1-2005 发电机液体内冷空心导线 第1部分:铜空心导线 ()
JB/T 10415.2-2007 发电机液体内冷空心导线 第2部分:不锈钢空心导线 ()
JB/T 10425.1-2004 风力发电机组偏航系统 第1部分:技术条件 ()
JB/T 10425.2-2004 风力发电机组偏航系统 第2部分:试验方法 ()
JB/T 10426.1-2004 风力发电机组制动系统 第1部分:技术条件 ()
JB/T 10426.2-2004 风力发电机组制动系统 第2部分:试验方法 ()
JB/T 10427-2004 风力发电机组一般液压系统 ()
JB/T 10499-2005 透平型发电机非正常运行工况设计和应用导则 ()
JB/T 10705-2007 滚动轴承 风力发电机轴承 ()
JB/T 10747-2007 整体凸极式无刷三相同步发电机技术条件 Specification for integrated salient pole brushless three-phase synchronous generator
JB/T 1267-2002 50MW~200MW汽轮发电机转子锻件技术条件 ()
JB/T 1268-2002 50MW~200MW汽轮发电机无磁性护环锻件技术条件 ()
JB/T 1269-2002 汽轮发电机磁性环锻件技术条件 ()
JB/T 1270-2002 水轮机、水轮发电机大轴锻件技术条件 ()
JB/T 1329-1991 汽轮机与汽轮发电机 连接尺寸 ()
JB/T 1330-1991 汽轮发电机组 中心标高与安装尺寸 ()
JB/T 1581-1996 汽轮机、汽轮发电机转子和主轴锻件 超声波探伤方法 ()
JB/T 2661-1999 ZCF系列直流测速发电机技术条件 ()
JB/T 3320.1-2000 小型无刷三相同步发电机技术条件 ()
JB/T 3320.2-2000 小型单相同步发电机技术条件 ()
JB/T 3334.1-2000 水轮发电机用制动器 第1部分:立式水轮发电机用制动器 ()
JB/T 3334.2-2000 水轮发电机用制动器 第2部分:卧式水轮发电机用制动器 ()
JB/T 4010-2006 汽轮发电机钢质护环超声波探伤 Ultrasonic examination of turbine-Generator steel reataining rings
JB/T 4123-1999 航船和海上石油平台用312.5~3125kVA三相同步发电机技术条件 ()
JB/T 4271-1999 船用三相交流无刷发电机技术条件 ()
JB/T 4401.1-1999 船用小型单相同步发电机技术条件 ()
JB/T 4401.2-1999 船用小型三相同步发电机技术条件 ()
JB/T 51020-1992 小型风力发电机组 可靠性考核方法 ()
JB/T 5780-1991 发电机转子接地保护装置 技术条件 ()
JB/T 6228-2005 汽轮发电机绕组内部水系统检验方法及评定 ()
JB/T 6229-2005 透平发电机转子气体内冷通风道 检验方法及限值 ()
JB/T 6507-1992 小型三相异步水轮发电机 系列技术条件 ()
JB/T 6698-2007 机动车及内燃机用永磁发电机 安装尺寸 ()
JB/T 6700-2007 机动车及内燃机用交流发电机 安装尺寸 ()
JB/T 6709-2006 机动车及内燃机用交流发电机 电子式电压调节器 技术条件 Specifications of alternators electronic voltage regulater applied for motor vehicles and internal-combustion engine
JB/T 6710-2006 机动车及内燃机用交流发电机 技术条件 Specifications of alternators applied for motor vehicles and internal-combustion engine
JB/T 6711-2007 机动车及内燃机用永磁发电机 型号编制规则 ()
JB/T 6755-1993 柴油发电机组成套开关设备 ()
JB/T 6761-1993 脉冲测速发电机 通用技术条件 ()
JB/T 6776-1993 工频汽油发电机组 额定功率、电压及转速 ()
JB/T 6939.1-2004 离网型风力发电机组用控制器 第1部分:技术条件 ()
JB/T 6939.2-1993 小型风力发电机组用控制器 试验方法 ()
JB/T 6939.2-2004 离网型风力发电机组用控制器 第2部分:试验方法 ()
JB/T 7023-2002 水轮发电机镜板锻件技术条件 ()
JB/T 7026-2004 50MW以下汽轮发电机 转子锻件 技术条件 ()
JB/T 7029-2004 50MW以下汽轮发电机 无磁性护环锻件 技术条件 ()
JB/T 7030-2002 300MW~600MW汽轮发电机无磁性护环锻件技术条件 ()
JB/T 7071-2005 灯泡式水轮发电机 基本技术条件 ()
JB/T 7143.1-1993 风力发电机组用逆变器 技术条件 ()
JB/T 7143.2-1993 风力发电机组用逆变器 试验方法 ()
JB/T 7178-2002 300MW~600MW汽轮发电机转子锻件技术条件 ()
JB/T 7323-1994 风力发电机组 试验方法 ()
JB/T 7596-1994 船用充电发电机 技术条件 ()
JB/T 7784-2006 透平同步发电机用交流励磁机 技术条件 Technical requirements of AC exciter for turbine-type synchronous generators
JB/T 8160-1995 CK系列空心转子异步测速发电机 ()
JB/T 8167-2006 滚动轴承 汽车发电机轴承 技术条件 ()
JB/T 8171-1999 发电机低励磁阻抗保护装置 ()
JB/T 8172-1999 发电机定子接地保护装置 ()
JB/T 8186-1999 工频柴油发电机组 额定功率、电压及转速 ()
JB/T 8445-1996 三相同步发电机负序电流承受能力 试验方法 ()
JB/T 8446-2005 隐极式同步发电机转子匝间短路测定方法 ()
JB/T 8582.6-2001 农用运输车 发电机 ()
JB/T 8705-1998 50MW以下汽轮发电机无中心孔转子锻件技术条件 ()
JB/T 8706-1998 50~200MW汽轮发电机无中心孔转子锻件技术条件 ()
JB/T 8708-1998 300~600MW汽轮发电机无中心孔转子锻件技术条件 ()
JB/T 8888-1999 环芯法测量汽轮机、汽轮发电机转子锻件 残余应力的试验方法 ()
JB/T 8981-1999 有刷三相同步发电机 技术条件(机座号132-400) ()
JB/T 8990-1999 大型汽轮发电机定子端部绕组模态试验分析和固有频率测量方法及评定 ()
JB/T 8991-1999 发电机锡焊接头检测方法 ()
JB/T 8993-1999 大型发电机寿命管理数据库导则 ()
JB/T 9406-1999 电影用二冲程汽油发电机组 技术条件 ()
JB/T 9528-1999 原动机 弧焊发电机组 ()
JB/T 9572-1999 发电机逆功率保护装置和逆功率继电器 ()
JB/T 9573-1999 发电机匝间短路保护装置及继电器 ()
JB/T 9578-1999 稀土永磁同步发电机技术条件 ()
JB/T 9583.1-1999 气体燃料发电机组 通用技术条件 ()
JB/T 9583.2-1999 气体燃料发电机组 额定功率、电压及转速 ()
JB/T 9759-1999 内燃发电机组轴系扭转振动的限值及测量方法 ()
JB/T 9844-1999 拖拉机用永磁交流发电机 ()
JIS B0149-1990 发动机术语汇编和定义.驱动发电机组
エンジン駆動発電セット用語
Glossary of terms and definitions of engine -- Driven generating sets
JIS B8022-1990 发动机驱动的发电机组规范标准格式
エンジン駆動発電セット仕様書様式
Standard form of specifications of engine-driven generating sets
JIS C1400-0-2005 风力涡轮发电机系统.第0部分:风力涡轮发电机系统术语汇编
風力発電システム―第0部:風力発電用語
Wind turbine generator systems -- Part 0: Glossary of terms for wind turbine generator system
JIS C1400-2-1999 风力涡轮发电机系统.第2部分:小型风力涡轮机的安全性
風力発電システム ― 第2部:小形風力発電システムの安全基準
Wind turbine generator systems -- Part 2: Safety of small wind turbines
JIS C1400-11-2005 风力涡轮发电机系统.第11部分:噪声测量技术
風力発電システム―第11部:騒音測定方法
Wind turbine generator systems -- Part 11: Acoustic noise measurement techniques
JIS C1400-12-2002 风涡轮发电机系统.第12部分:风力涡轮机动力特性试验
風力発電システム ― 第12部:風車の性能計測方法
Wind turbine generator systems -- Part 12: Wind turbine power performance testing
JIS C1400-12 ERRATUM 1-2002 风力涡轮发电机系统.第12部分:风力涡轮发电机的性能试验(勘误1)
Wind turbine generator systems -- Part 12: Wind turbine power performance testing (Erratum 1)
JIS C1400-21-2005 风力涡轮发电机系统.第21部分:网格连接风力涡轮机的发电质量特性的测量和评定
風力発電システム―第21部:系統連系風車の電力品質特性の測定及び評価
Wind turbine generator systems -- Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines
JIS C7510-2000 自行车发电机灯用白炽灯泡
自転車発電ランプ用電球
Incandescent lamps for bicycle dynamo lamps
JIS D1615-1989 汽车用交流发电机的试验方法
自動車用オルタネータ試験方法
Test methods of alternators for automobiles
JIS D5205-1998 汽车零件.商业车辆和公共汽车的交流发电机.安装尺寸
自動車部品 ― 大型車用オルタネータ ― 取付け部形状及び寸法
Automotive parts -- Alternators for commercial vehicles and buses -- Mounting dimension
JIS F0022-2002 造船.术语汇编.机械.推进机械、锅炉、发电机发动机及辅助机械的原动机
造船用語 ― 機関 ― 主機,ボイラ,発電機関及び補機用原動機
Shipbuilding -- Glossary of terms -- Machinery -- Propulsion machinery, boilers, generator engines and prime mover for auxiliary machinery
JIS F4306-1998 造船.水冷式四冲程柴油发电机组
船用水冷4サイクルディーゼル発電機関
Shipbuilding -- Water cooled four cycle generator diesel engines
JIS F8064-2000 船用电气装置.第301部分:设备.发电机和电动机
船用電気設備 第301部 機器 ― 発電機及び電動機
Electrical installations in ships -- Part 301: Equipment -- Generators and motors
JIS Z4702-1999 医用X光射线装置的高压发电机的一般要求
医用X線高電圧装置通則
General requirements for high-voltage generators of medical X-ray apparatus
NF C51-209-2000 高压发电机的芯棒和线圈的绝缘性试验 (Test of insulation of bars and coils of high-voltage machines.)
NF C51-222-2000 旋转电机.第22部分:往复式内燃机驱动的发电机组(RIC)用交流发电机 (Rotating electrical machines - Part 22 : AC genertors for reciprocating internal combustion (RIC) engine driven generating sets.)
NF E37-301-1994 往复式内燃机驱动的交流发电机组.第1部分:使用、额定功率和性能 (Reciprocating internal combustion engine driven alternating current generating sets. Part 1 : application, ratings and performance.)
NF E37-302-1994 循环往复式内燃发动机驱动交流发电机组.第2部分:发动机 (Reciprocating internal combustion engine driven alternating current generating sets. Part 2 : engines.)
NF E37-303-1994 循环往复式内燃发动机交流电发生.第3部分:发电机组交流电发生器材 (Reciprocating internal combustion engine driven alternating current generating. Part 3 : alternating current generators for generating sets.)
NF E37-304-1994 往复式内燃机驱动的交流发电机组.第4部分:控制装置机开关装置 (Reciprocating internal combustion engine driven alternating current generating sets. Part 4 : controlgear and switchgear.)
NF E37-305-1994 循环往复式内燃发动机交流电发生.第5部分:发电机组 (Reciprocating internal combustion engine driven alternating current generating setts. Part 5 : generating sets.)
NF E37-306-1994 往复式内燃机驱动的交流发电机组.第6部分:试验方法 (Reciprocating internal combustion engine driven alternating current generating sets. Part 6 : test methods.)
NF E37-310-1999 往复式内燃机驱动的交流发电机组.第10部分:包络面法测量空气噪声 (RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN CURRENT GENERATING SETS. PART 10 : MEASUREMENT OF AIRBONE NOISE BY THE ENVELOPING SURFACE METHOD.)
NF E50-001-1956 风力充电机组.小功率风力发电机 (WIND CHARGERS. LOW-RATED AEROGENERATORS.)
NF E90-079-2-2002 机械振动.通过对旋转轴的测量评定机械振动.第2部分:标称运行速度为1500r/min,1800r/min,3000r/min和3600r/m (Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2 : land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/)
NF F48-110-1995 铁路固定设备.信号设备通信设备和计算机设备用标准式电源装置.有柴油发动机的备用发电机设备 (RAILWAY FIXED EQUIPMENT. MODULAR POWER SUPPLY UNITS FOR SIGNALLING EQUIPMENT, TELECOMMUNICATIONS EQUIPMENT AND COMPUTER EQUIPMENT. EQUIPMENTS FOR STAND-BY GENERATOR WITH DIESEL MOTOR.)
NF F48-210-1997 铁路固定设备.信号设备、通信设备和计算机设备用调制电源装置.带柴油发动机的备用发电机系统 (RAILWAY FIXED EQUIPMENT. MODULAR POWER SUPPLY UNITS FOR SIGNALLING EQUIPMENT, TELECOMUNICATIONS EQUIPMENT AND COMPUTER EQUIPMENT. SYSTEM OF STAND-BY GENERATOR WITH DIESEL MOTOR.)
NF L51-151-1979 直流发电机电压调器.底座安装和和外形尺寸 (VOLTAGE REGULATORS FOR DIRECT CURRENT GENERATORS. OVERALL DIMENSIONS AND METHOD OF FIXING OF BASE.)
NF L51-160-1966 飞行器电气设备.直流发电机馈线保护箱 (ELECTRICAL EQUIPMENT FOR AIRCRAFT. FEEDER PROTECTION HOUSING FOR DIRECT CURRENT GENERATOR.)
NF R13-107-1970 发电机电磁调节器.螺钉固定 (ELECTROMAGNETIC REGULATORS FOR GENERATORS. SCREW MOUNTING.)
NF R13-201-1966 交流发电机及其调节器用接线柱 (TERMINALS FOR ALTERNATORS AND THEIR REGULATORS.)
NF R13-202-1989 道路车辆.组合式带整流器的交流发电机.试验方法和试验的一般条件 (Road vehicles. Alternators with regulators. Test methods and general requirements.)
NF R13-203-1989 特种车辆和派生车辆.组合式带整流器的交流发电机.尺寸特性 (PASSENGER CARS AND SIMILAR VEHICLES. ALTERNATORS WITH INCORPORATED REGULATORS. DIMENSIONAL CHARACTERISTICS.)
NF R23-103-1932 摩托车磁发电机和直流发电机.锥轴端 (MAGNETOS AND DYNAMOS FOR MOTORCYCLES.)
NF R33-101-1974 自行车照明发电机.互换特性 (LIGHTING GENERATOR FOR CYCLES. INTERCHANGEABILITY CHARACTERISTICS.)
NF R33-102-1974 自行车照明发电机.在车架上的固定 (LIGHTING GENERATOR FOR CYCLES. CLAMPING ON THE FRAME.)
NF R33-103-1974 自行车照明发电机.技术规范和试验 (LIGHTING GENERATOR FOR CYCLES. TECHNICAL REQUIREMENTS AND TESTS.)
NF X50-001-2-6-2000 动力站设备的征购指南.第2部分:电气设备.第6节:发电机 (Guide for procurement of power station equipment - Part 2 : electrical equipment - Section 6 : generators.)
QC/T 29099-1992(2005) 摩托车用硅整流交流发电机通用技术条件 ()
QC/T 424-1999(2005) 汽车用交流发电机电气特性试验方法 ()
QC/T 729-2005 汽车用交流发电机技术条件 Automotive alternator technical specification
QC/T 774-2006 汽车交流发电机用电子电压调节器技术条件 Technical specification for electronic voltage regulator for automotive alternator
SD 152-1987(2005) 大中型水轮发电机基本技术条件 ()
SD 252-1988(2005) 全国地方小型火力发电厂电气运行规程(发电机、变压器部分) ()
SD 281-1988(2005) 静态型发电机转子接地继电器技术条件 ()
SD 282-1988(2005) 静态型发电机定子接地继电器技术条件 ()
SD 287-1988(2005) 水轮发电机定子现场装配工艺导则 ()
SD 288-1988(2005) 水轮发电机组推力轴承、导轴承安装调整工艺导则 ()
SDJ 249.3-1988(2005) 水利水电基本建设工程单元工程质量等级评定标准(三)水轮发电机组安装工程 ()
UL 1112-1997 船用电动机和发电机(启动、外驱动倾角、配平片、发电机、交流发电机) (Marine electric motors and generators (cranking, outdrive tilt, trim tab, generators, alternators) )
UL 1248-1993 旅游车用发动机和发电机组合机组 (Engine-generator assemblies for use in recreational vehicles )
UL 1310-1994 2级发电机组 (Class 2 power units )
UL 674-2003 1类危险场所用电动机和发电机 (Electric motors and generators for use in division 1 hazardous (classified) locations )
prEN 45538-1995 采购指南 风力发电机 Guides for procurement - Wind turbines
prEN 45540-1995 采购指南 涡轮发电机 Guide for procurement - Generators driven by turbine
prEN 61400-1-2003 风轮发电机系统 第1部分:安全要求 Wind turbine generator systems - Part 1: Safety requirements (IEC 61400-1:1999, modified) / Note: Intended as replacement for ENV 61400-1 (1995-02).
prEN 88528-11-2002 交流发电机组驱动的往复式内燃机 第11部分:旋转连续动力系统 性能要求和试验方法 IEC 88528-11, Ed. 1: Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems; Performance requirements and test methods
编号中文名称英文名称

返回