| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI Z21.23-2000
| 煤气器具恒温器
| Gas Appliance Thermostats
|
| ANSI Z21.23-2000 and ANSI Z 21.23a-2003
| 燃气器具恒温器
| Gas Appliance Thermostats
|
| ANSI Z21.23b-2005
| 燃气器具恒温器
| Gas Appliance Thermostats
|
| ANSI/AAMI II36-2004
| 婴儿恒温箱
| Infant Incubators
|
| ANSI/ARI 750-2001
| 制冷剂恒温膨胀阀
| Thermostatic Refrigerant Expansion Valves
|
| ANSI/ASTM B753-2001
| 恒温组份合金规范
| Specification for Thermostat Component Alloys
|
| ASTM B 106-1996
| 恒温金属挠性的标准试验方法
| Standard Test Methods for Flexivity of Thermostat Metals
|
| ASTM B 223-2003
| 恒温金属弹性模量的标准试验方法(悬臂梁法)
| Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
|
| ASTM B 362-1991
| 恒温双金属制螺旋线圈的机械扭转率的试验方法
| Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
|
| ASTM B 389-1981
| 恒温双金属螺旋形线圈的热偏转率的标准试验方法
| Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
|
| ASTM B 478-1985
| 恒温双金属横向弯曲率的测试方法
| Test Method for Cross Curvature of Thermostat Metals
|
| ASTM B 753-2001
| 恒温器组件用合金标准规范
| Standard Specification for Thermostat Component Alloys
|
| ASTM D 1989-1997
| 用微处理机控制的恒温量热器测量煤和焦炭总热值的试验方法
| Test Method for Gross Calorific Value of Coal and Coke by Microprocessor Controlled Isoperibol Calorimeters
|
| ASTM E 1292-1994
| 重力对流和强制通风恒温箱
| Standard Specification for Gravity Convection and Forced Ventilation Incubators
|
| ASTM E 487-2004
| 化学材料的恒温稳定性的标准试验方法
| Standard Test Method for Constant-Temperature Stability Of Chemical Materials
|
| BS 7478-1991
| 恒温散热器阀的选择和使用指南
| Guide to selection and use of thermostatic radiator valves
|
| BS 7942-2000
| 检修机构用恒温混合阀
| Thermostatic mixing valves for use in care establishments
|
| BS EN 1111-1999
| 卫生用具龙头.恒温混合阀(PN10).一般技术规范
| Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
|
| BS EN 1287-1999
| 卫生排水塞.低压恒温混合阀.一般技术规范
| Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications
|
| BS EN 215-2004
| 恒温散热器控制阀.要求和试验方法
| Thermostatic radiator valves - Requirements and test methods
|
| BS EN 257-1992
| 燃气器具用机械恒温器
| Mechanical thermostats for gas-burning appliances
|
| BS EN ISO 9046-2005
| 建筑施工.连接产品.恒温下密封剂的粘附/粘结性能的测定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature
|
| DIN 1715-1-1983
| 恒温器用金属.交货技术条件
| Thermostat metals; technical delivery conditions
|
| DIN 1715-2-1983
| 恒温器用金属.热曲率比的检验
| Thermostat metals; testing the specific thermal curvature
|
| DIN 51900-2-2003
| 固体和液体燃料检验.用弹式量热计测定总热值和计算净热值.第2部分:恒温环境或固定套量热计法
| Testing of solid and liquid fuels - Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value - Part 2: Method using isoperibol ot static, jacket calorimeter
|
| DIN 58945-1-1971
| 微生物产品用恒温箱.第1部分:术语、要求、使用
| Incubators for microbiological purposes; terms, requirements, use
|
| DIN 58945-2-1971
| 微生物产品用恒温箱.第2部分:检验
| Incubators for microbiological purposes; testing
|
| DIN EN 1111-1998
| 卫生设备管件.恒温混合阀(PN 10).通用技术规范
| Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998
|
| DIN EN 1287-1999
| 卫生器具管件.低压恒温混合阀.通用技术规范
| Sanitary tapware - Low pressure thermostatic mixing valves; general technical specification; German version EN 1287:1999
|
| DIN EN 215-2006
| 恒温散热器阀.要求和试验方法
| Thermostatic radiator valves - Requirements and test methods; German version EN 215:2004 + A1:2006
|
| DIN EN 2591-615-2002
| 航空航天系列.光电连接件.试验方法.第615部分:光学元件.恒温下电缆连接完整性
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001
|
| DIN EN 2794-004-1999
| 航空航天系列.额定电流为20A至50A的单极的恒温补偿电路断路保护开关.第004部分:UNC螺纹端子.产品标准
| Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard; German version EN 2794-004:1999
|
| DIN EN ISO 9046-2005
| 房屋建筑.连接产品.恒温下密封胶的粘附/粘合性能的测定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002); German version EN ISO 9046:2004
|
| EN 1287-1999
| 卫生间泄水器 低压恒温混合阀 通用技术规范
| Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications
|
| EN 215-1-1987+AC1-1987
| 恒温散热阀 第1部分：要求和试验方法
| Thermostatic radiator valves; Part 1: Requirements and test methods
|
| EN 257-1992
| 燃气器具用机械恒温器
| Mechanical thermostats for gas-bruning appliances
|
| EN 29046-1990
| 房层建筑 密封胶 恒温下粘合性能的测定
| Building construction - Jointing products - Determination of adhesion/cohesion properties at constant temperatures (ISO 9046:1987)
|
| IEC 60389-1 AMD 1-1976
| 主要用于通信设备和采用类似技术的电子应用方面的恒温开关 第1部分:一般要求和测量方法 修改1
| Thermostatic switches primarily for use in equipment for telecommunications and in electronic applications employing similar techniques. Part 1 : General requirements and measuring methods
|
| IEC 60389-1-1972
| 主要用于通信设备和采用类似技术的电子应用方面的恒温开关 第1部分:一般要求和测量方法
| Thermostatic switches primarily for use in equipment for telecommunications and in electronic applications employing similar techniques. Part 1 : General requirements and measuring methods
|
| ISO 9046-2002
| 建筑结构.连接产品.恒温下密封剂的粘附和粘结性能的测定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature
|
| JB/T 5376-1991
| 低温恒温槽 技术条件
| ()
|
| JB/T 5377-1991
| 恒温水槽 技术条件
| ()
|
| JB/T 9518-1999
| 恒温油槽 技术条件
| ()
|
| JIS B8481-1999
| 室内恒温器
| Room thermostats
|
| JIS F9702-1996
| 造船.装添系统恒温器
| Shipbuilding -- Filled system thermostats
|
| JIS H7103-2002
| Ti-Ni类形状记忆合金丝材的恒温拉力试验方法
| Method of fixed temperature tensile test for wires of Ti-Ni shape memory alloys |
| JIS H7104-2002
| 形状记忆合金螺旋弹簧的恒温负荷试验方法
| Method of fixed temperature load test for coil spring of shape memory alloys
|
| NF C47-110-1981
| 家用自动装置.环境恒温调节器
| (Automatic devices for household use. Rooms thermostats.)
|
| NF C47-120-1981
| 家用自动装置.局部供暖设备中恒温器的专用规则
| (Automatic devices for household use. Particular requirements on thermostats incorporated in fixed room heaters.)
|
| NF C93-450-1983
| 电子元件质量保证体系.电气和电子设备用恒温器.一般规定
| (Electronic components. Electrical thermostatic switches for use in electronic equipments.)
|
| NF D36-500-1992
| 燃气器具用机械式恒温器
| (Mechanical thermostats for gas-burning appliances.)
|
| NF P52-002-1-1989
| 散热器恒温阀.第1部分:试验方法的要求
| (Thermostatic radiator valves. Part 1 : requirements and test methods.)
|
| NF X15-140-2002
| 空气湿度的测量.气候实验室和恒温室.表征和检定
| (Measurement of air moisture - Climatic and thermostatic chambers - Characterisation and verification.)
|
| QB/T 1741-2004
| 电热片蚊香用恒温电加热器
| ()
|
| prEN 1042-1995
| 塑料管道系统 聚烯烃管和/或配件间的熔接连接件 恒温下内部压力抵抗力的测定
| Plastics piping systems - Fusion joints between polyolefin pipes and/or fittings - Determination of resistance to internal pressure at constant temperature
|
| prEN 215-2-1986
| 恒温散热阀 第2部分：连接尺寸和细节
| Thermostatic radiator valves; part 2: dimensions and details on connection
|
| 编号 | 中文名称 | 英文名称 |
|---|