| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI/IEEE 1174-2000
| 可编程测量仪的标准串行接口
| Standard Serial Interface for Programmable Instrumentation
|
| ANSI/IEEE 1532-2002
| 可编程设备的系统内配置标准
| Standard for In-System Configuration of Programmable Devices
|
| ANSI/IEEE 488.1-2003
| 可编程检测仪表用数字接口
| Digital Interface for Programmable Instrumentation
|
| ANSI/NEMA IA2.2-1993
| 可编程控制器.第2部分:设备要求
| Programmable Controllers - Part 2: Equipment Requirements
|
| ANSI/NEMA IA2.4-1996
| 可编程控制器.第4部分:用户指南
| Programmable Controllers - Part 4: User Guidelines
|
| ANSI/NEMA IAS2.4-1996
| 可编程控制器.第4部分:用户指南
| Programmable Controllers - Part 4: User Guidelines
|
| ANSI/UL 1998-1999
| 可编程元件中软件的安全标准
| Standard for Safety for Software in Programmable Components
|
| BS CECC 90105-1987
| 电子元器件用质量评估协调体系规范.空白详细规范:熔丝连接可编程只读存贮器、单晶硅集成电路
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fusible link programmable bipolar read only memories, silicon monolithic integrated circuits
|
| BS CECC 90113-1987
| 电子元器件用质量评估协调体系规范.空白详细规范.MOS紫外线光可抹式可编程序只读存贮器单晶硅电路
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification - MOS ultra-violet light erasable electrically programmable read only memories silicon monolithic circuits
|
| BS CECC 90114-1990
| 电子元器件用质量评估协调体系规范.空白详细规范:可编程序的逻辑阵列(PLA)
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: programmable logic arrays (PLA)
|
| BS EN 60601-1-4-1997
| 医用电气设备.安全性一般要求.辅助标准. 可编程的医院电气设备一般要求
| Medical electrical equipment - General requirements for safety - Collateral standard - General requirements for programmable electrical medical systems
|
| BS EN 61131-1-2003
| 可编程控制器.一般说明
| Programmable controllers - General information
|
| BS EN 61131-3-2003
| 可编程控制器.程序设计语言
| Programmable controllers - Programming languages
|
| BS EN 61131-5-2001
| 可编程控制器.通信
| Programmable controllers - Communications
|
| BS EN 61131-7-2001
| 可编程控制器.模糊控制程序
| Programmable controllers - Fuzzy control programming
|
| BS EN 61508-1-1999
| 电气/电子/可编程电子安全相关系统的功能安全性.一般要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - General requirements
|
| BS EN 61508-2-2000
| 电气/电子/可编程电子安全相关系统的功能安全性.电气/电子/可编程电子安全相关系统的要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Requirements for electrical/electronic/programmable electronic safety-related systems
|
| BS EN 61508-3-1999
| 电气/电子/可编程电子安全相关系统的功能安全性.软件要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Software requirements
|
| BS EN 61508-4-1999
| 电气/电子/可编程电子安全相关系统的功能安全性.定义和缩写
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Definitions and abbreviations
|
| BS EN 61508-5-1999
| 电气/电子/可编程电子安全相关系统的功能安全性.安全性整体水平测定方法的实例
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Examples of methods for the determination of safety integrity levels
|
| BS EN 61508-6-2000
| 电气/电子/可编程序的电子安全相关系统的功能安全性.IEC 61508-2和IEC 61508-3的应用指南
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Guidelines on the application of IEC 61508-2 and IEC 61508-3
|
| BS EN 61508-7-2000
| 电气/电子/可编程电子安全相关系统的功能安全性.技术和测量总慨
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Overview of techniques and measures
|
| BS EN 62061-2005
| 机械安全.与安全有关的电气、电子和可编程序电子控制系统的功能安全
| Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
|
| BS IEC 60748-2-11-1999
| 半导体器件.集成电路.数字集成线路.单电集成电路可擦、可编程、只读存储器集成电路空白详细规范
| Semiconductor devices - Integrated circuits - Digital integrated circuits - Blank detail specification for single supply integrated circuit, electrically erasable, and programmable read-only memory - Blank detail specification for single supply integrated circuits electrically erasible and programmable read-only memory
|
| BS IEC 60748-2-12-2001
| 半导体器件.集成电路.数字集成电路.可编程序逻辑设备的空白详细规范
| Semiconductor devices - Integrated circuits - Digital integrated circuits - Blank detail specification for programmable logic devices (PLDs)
|
| BS IEC 61508-1-1999
| 电气/电子/可编程电子安全系统的功能安全性.一般要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems. General requirements
|
| BS IEC 61508-2-2000
| 电气/电子/可编程序电子安全相关系统的功能安全性.电气/电子/可编程序电子安全相关系统要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems. Requirements for electrical/electronic/programmable electronic safety-related systems
|
| BS IEC 61508-3-1999
| 电气/电子/可编程电子安全系统的功能安全性.软件要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems. Software requirements
|
| BS IEC 61508-4-1999
| 电气/电子/可编程电子安全系统的功能安全性.定义和缩写
| Functional safety of electrical/electronic/programmable electronic safety-related systems. Definitions and abbreviations
|
| BS IEC 61508-5-1999
| 电气/电子/可编程电子安全相关系统的功能安全性.安全完整等级测定方法实例
| Functional safety of electrical/electronic/programmable electronic safety-related systems. Examples of methods for the determination of safety integrity levels
|
| BS IEC 61508-6-2000
| 电气/电子/可编程序的电子安全性相关系统的功能安全性.IEC 61508-2和IEC 61508-3的应用指南
| Functional safety of electrical/electronic/programmable electronic safety-related systems. Guidelines on the application of IEC 61508-2 and IEC 61508-3
|
| BS IEC 61508-7-2000
| 电气/电子/可编程序电子安全相关系统的功能安全性.技术和测量综述
| Functional safety of electrical/electronic/programmable electronic safety-related systems. Overview of techniques and measures
|
| BS QC 790105-1992
| 电子元器件质量评定协调体系规范.半导体器件.集成电路.空白详细规范:集成电路熔断丝可编程序双极只读存储器
| Specification for harmonized system of quality assessment for electronic components - Semiconductor devices - Integrated circuits - Blank detail specification - Integrated circuit fusible-link programmable bipolar read-only memories
|
| BS QC 790106-1995
| 电子元件质量评估协调体糸规范.半导体器件.集成电路.数字集成电路.空白详细规范.MOS紫外线可擦可编程只读存
| Specification for harmonized system of quality assessment for electronic components - Semiconductor devices - Integrated circuits - Digital integrated circuits - Blank detail specification - MOS ultraviolet light erasable electrically programmable read-only memories
|
| DIN EN 60601-1-4-2001
| 医疗电气设备.第1-4部分:安全性一般要求.补充标准:可编程电气医疗系统
| Medical electrical equipment - Part 1-4: General requirements for safety; Collateral standard: Programmable electrical medical systems (IEC 60601-1-4:1996 + A1:1999); German version EN 60601-1-4:1996 + A1:1999
|
| DIN EN 61131-1-2004
| 可编程控制器.第1部分:一般资料
| Programmable controllers - Part 1: General information (IEC 61131-1:2003); German version EN 61131-1:2003
|
| DIN EN 61131-2-2004
| 可编程控制器.第2部分:设备要求和试验
| Programmable controllers - Part 2: Equipment requirements and tests (IEC 61131-2:2003); German version EN 61131-2:2003
|
| DIN EN 61131-3-2003
| 可编程控制器.第3部分:程序设计语言
| Programmable controllers - Part 3: Programming languages (IEC 61131-3:2003); German version EN 61131-3:2003
|
| DIN EN 61131-5-2001
| 可编程控制器.第5部分:通信
| Programmable controllers - Part 5: Communications (IEC 61131-5:2000); German version EN 61131-5:2001
|
| DIN EN 61131-7-2001
| 可编程控制器.第7部分:模糊控制程序
| Programmable controllers - Part 7: Fuzzy control programming (IEC 61131-7:2000); German version EN 61131-7:2000
|
| DIN EN 61508 Bb.1-2005
| 电气/电子/可编程序电子安全相关系统的功能安全性.第0部分:功能安全性和IEC 61508
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (IEC/TR 61508-0:2005)
|
| DIN EN 61508-1-2002
| 电气/电子/可编程电子安全相关系统的功能安全性.第1部分:一般要求 (IEC 61508-1:1998 + 技术勘误 1999); 德
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (IEC 61508-1:1998 + Corrigendum 1999); German version EN 61508-1:2001
|
| DIN EN 61508-2-2002
| 电气/电子/可编程电子安全相关系统的功能安全性.第2部分:电气/电子/可编程电子安全相关系统的要求 (IEC 615
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (IEC 61508-2:2000); German version EN 61508-2:2001
|
| DIN EN 61508-3-2002
| 电气/电子/可编程电子安全相关系统的功能安全性.第3部分:软件要求 (IEC 61508-3:1998 + 技术勘误 1999); 德
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (IEC 61508-3:1998 + Corrigendum 1999); German version EN 61508-3:2001
|
| DIN EN 61508-4-2002
| 电气/电子/可编程电子安全相关系统的功能安全性.第4部分:定义和缩略语 (IEC 61508-4:1998 + 技术勘误 1999)
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (IEC 61508-4:1998 + Corrigendum 1999); German version EN 61508-4:2001
|
| DIN EN 61508-5-2002
| 电气/电子/可编程电子安全相关系统的功能安全性.第5部分:确定安全整体水平方法的实例 (IEC 61508-5:1998 +
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (IEC 61508-5:1998 + Corrigendum 1999); German version EN 61508-5:2001
|
| DIN EN 61508-6-2003
| 与电气/电子/可编程电子安全相关的系统功能安全.第6部分.IEC61508-2、-3应用指南
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (IEC 61508-6:2000); German version EN 61508-6:2001
|
| DIN EN 61508-7-2003
| 与电气/电子/可编程电子安全相关系统的功能安全.第7部分.技术和测量总则
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (IEC 61508-7:2000); German version EN 61508-7:2001
|
| DIN EN 62061-2005
| 机械安全.与安全有关的电气、电子和可编程序电子控制系统的功能安全
| Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005); German version EN 62061:2005
|
| DIN ETS 300243-1-1996
| 终端设备.传真机组3、传真机组4、智能用户电报、用户电报用可编程通信接口(PCI)APPL1/COM.第1部分:CCITT-推
| Terminal Equipment (TE) - Programmable Communication Interface (PCI) APPLI/COM for facsimile group 3, facsimile group 4, teletex and telex services - Part 1: CCITT recommendation T.611 (1992) [modified]; English version ETS 300243-1:1995
|
| DIN ETS 300243-2-1996
| 终端设备.传真机组3、传真机组4、电传、用户电报电话用可编程通信接口(PCI)APPL1/COM.第2部分:合格试验
| Terminal Equipment (TE) - Programmable Communication Interface (PCI) APPLI/COM for facsimile group 3, facsimile group 4, teletex and telex services - Part 2: Conformance testing; English version ETS 300243-2:1995
|
| DIN ETS 300777-3-1998
| 终端设备(TE).多媒体信息检索业务的终端对终端协议.第3部分:MHEG-5用可编程应用接口(API)
| Terminal Equipment (TE) - End-to-end protocols for multimedia information retrieval services - Part 3: Application Programmable Interface (API) for MHEG-5; English version ETS 300777-3:1997
|
| DIN ETS 300835-2001
| 多媒体终端和应用(MTA).在综合业务数字网上传输的文件用可编程通信接口(PCI)
| Multimedia Terminals and Applications (MTA) - Programmable Communication Interface (PCI) for file transfer over Integrated Services Digital Network (ISDN) (Endorsement of the English version ETS 300835:1998 as German)
|
| DIN ETS 300838-2001
| 综合业务数字网(ISDN).ISDN用同步可编程通信接口(HPCI)
| Integrated Services Digital Network (ISDN) - Harmonized Programmable Communication Interface (HPCI) for ISDN (Endorsement of the English version ETS 300838:1998 as German)
|
| DIN IEC 60625-1-1981
| 可编程测量仪的接口系统(字节串行、位并行).第1部分:功能规范、电气规范、机械规范、系统应用和设计者及用
| An interface system for programmable measuring instruments (byte serial, bit parallel); part 1: functional specifications, electrical specifications, mechanical specifications, system applications and requirements for designer and user
|
| DIN IEC 60625-2-1981
| 可编程测量仪的接口系统(字节串行、位并行).第2部分:代码和格式惯例
| An interface system for programmable measuring instruments (byte serial, bit parallel); part 2: code and format conventions
|
| EN 61131-1-2003
| 可编程控制器 第1部分：一般资料
| Programmable controllers - Part 1: General information (IEC 61131-1:2003) / Note: Endorsement notice
|
| EN 61131-2-2003
| 可编程控制器 第2部分：设备要求和试验
| Programmable controllers - Part 2: Equipment requirements and tests (IEC 61131-2:2003) / Note: Endorsement notice
|
| EN 61131-3-2003
| 可编程控制器 第3部分：编程语言
| Programmable controllers - Part 3: Programming languages (IEC 61131-3:2003) / Note: Endorsement notice
|
| EN 61131-5-2001
| 可编程控制器 第5部分：通信
| Programmable controllers - Part 5: Communications (IEC 61131-5:2000)
|
| EN 61131-7-2000
| 可编程控制器 第7部分：模糊控制编程
| Programmable controllers - Part 7: Fuzzy control programming (IEC 61131-7:2000)
|
| EN 61508-1-2001
| 电气/电子/可编程电子安全相关系统的功能安全 第1部分：一般要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (IEC 61508-1:1998 + Corrigendum 1999) / Note: Endorsement notice
|
| EN 61508-2-2001
| 电气/电子/可编程电子安全相关系统的功能安全 第2部分：电气/电子/可编程电子安全相关系统的要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (IEC 61508-2:2000) / Note: Endorsement notice
|
| EN 61508-3-2001
| 电气/电子/可编程电子安全相关系统的功能安全 第3部分：软件要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (IEC 61508-3:1998 + Corrigendum 1999) / Note: Endorsement notice
|
| EN 61508-4-2001
| 电气/电子/可编程电子安全相关系统的功能安全 第4部分：定义和缩略语
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (IEC 61508-4:1998 + Corrigendum 1999) / Note: Endorsement notice
|
| EN 61508-5-2001
| 电气/电子/可编程电子安全相关系统的功能安全 第5部分：确定安全整体水平方法的实例
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (IEC 61508-5:1998 + Corrigendum 1999) / Note: Endorsement notice
|
| EN 61508-6-2001
| 电气/电子/可编程电子安全相关系统的功能安全 第6部分：IEC 61508-2 和IEC 61508-3的应用指南
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (IEC 61508-6:2000) / Note: Endorsement notice
|
| EN 61508-7-2001
| 电气/电子/可编程电子安全相关系统的功能安全 第7部分：技术和措施综述
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (IEC 61508-7:2000) / Note: Endorsement notice
|
| GB/T 14119-1993
| 半导体集成电路双极熔丝式可编程只读存储器空白详细规范(可供认证用)
| Blankdetail specification for semiconductor inte-grated circuit fusible-link programmable bipolar read-only memories
|
| GB/T 15969.1-2007
| 可编程序控制器 第1部分：通用信息
| Programmable controllers--Part 1:General information
|
| GB/T 15969.2-1995
| 可编程序控制器第2部分:设备特性
| Programmable controllers--Part 2:Equipment characteristics
|
| GB/T 15969.3-2005
| 可编程序控制器第3部分:编程语言
| Programmable controllers Part3:Programming languages
|
| GB/T 15969.4-2007
| 可编程序控制器 第4部分：用户导则
| Programmable controllers--Part 4:User guidelines
|
| GB/T 15969.5-2002
| 可编程序控制器第5部分:通信
| Programmable controllers--Part 5:Communications
|
| GB/T 15969.8-2007
| 可编程序控制器 第8部分：编程语言的应用和实现导则
| ()
|
| GB/T 17165.3-2001
| 模糊控制装置和系统第3部分:可编程控制器模糊控制编程
| Fuzzy control devices and systems--Part 3:Programmable controllers--Fuzzy control programming
|
| GB/T 17574.11-2006
| 半导体器件 集成电路 第2-11部分：数字集成电路 单电源集成电路电可擦可编程只读存储器 空白详细规范
| Semiconductor devices - Integrated circuits - Part 2-11: Digital integrated circuits - Blank detail specification for single supply integrated circuit electrically erasable and programmable read-only memory
|
| GB/T 17574.9-2006
| 半导体器件 集成电路 第2-9部分：数字集成电路紫外光擦除电可编程MOS只读存储器空白详细规范
| Semiconductor devices - Integrated circuits - Part 2-9: Digital integrated circuits - Blank detail specification for MOS ultraviolet light erasable electrically programmable read-only memories
|
| GB/T 20438.1-2006
| 电气/电子/可编程电子安全相关系统的功能安全第1部分: 一般要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems―Part 1: General requirements
|
| GB/T 20438.2-2006
| 电气/电子/可编程电子安全相关系统的功能安全第2部分: 电气/电子/可编程电子安全相关系统的要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems―Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
|
| GB/T 20438.3-2006
| 电气/电子/可编程电子安全相关系统的功能安全第3部分: 软件要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems―Part 3: Software requirements
|
| GB/T 20438.4-2006
| 电气/电子/可编程电子安全相关系统的功能安全第4部分: 定义和缩略语
| Functional safety of electrical/electronic/programmable electronic safety-related systems―Part 4: Definitions and abbreviations
|
| GB/T 20438.5-2006
| 电气/电子/可编程电子安全相关系统的功能安全 第5部分: 确定安全完整性等级的方法示例
| Functional safety of electrical/electronic/programmable electronic safety-related systems―Part 5: Examples of methods for the determination of safety integrity levels
|
| GB/T 20438.6-2006
| 电气/电子/可编程电子安全相关系统的功能安全第6部分: GB/T 20438.2 和GB/T 20438.3 的应用指南
| Functional safety of electrical/electronic/programmable electronic safety-related systems―Part 6: Guidelines on the application of GB/T 20438.2 and GB/T 20438.3
|
| GB/T 20438.7-2006
| 电气/电子/可编程电子安全相关系统的功能安全 第7部分: 技术和措施概述
| Functional safety of electrical/electronic/programmable electronic safety-related systems―Part 7: Overview of techniques and measures
|
| IEC 60488-1-2004
| 可编程序设备的标准数字接口高效协议.第1部分:总则
| Higher performance protocol for the standard digital interface for programmable instrumentation - Part 1: General
|
| IEC 60488-2-2004
| 可编程序设备的标准数字接口.第2部分:代码、格式、协议和通用命令
| Standard digital interface for programmable instrumentation - Part 2: Codes, formats, protocols and common commands
|
| IEC 60748-2-11-1999
| 半导体器件 集成电路 第2-11部分:数字集成电路 单电集成电路可擦、可编程、只读存储器集成电路空白详细规范
| Semiconductor devices - Integrated circuits - Part 2-11: Digital integrated circuits - Blank detail specification for single supply integrated circuit, electrically erasable, and programmable read-only memory
|
| IEC 60748-2-12-2001
| 半导体器件 集成电路 第2-12部分：数字集成电路 可编程逻辑器件（PLDs）空白详细规范
| Semiconductor devices - Integrated circuits - Part 2-12: Digital integrated circuits; Blank detail specification for programmable logic devices (PLDs)
|
| IEC 60748-2-7-1992
| 半导体器件 集成电路 第2部分:数字集成电路 第7节:熔丝式可编程双极只读存储器集成电路空白详细规范
| Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 7: blank detail specification for integrated circuit fusible-link programmable bipolar read-only memories
|
| IEC 60748-2-9-1994
| 半导体器件 集成电路 第2部分:数字集成电路 第9节:MOS紫外线擦除可编程只读存储器空白详细规范
| Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits; section 9: Blank detail specification for MOS ultraviolet light erasable electrically programmable read-only memories
|
| IEC 60987-1989
| 对核电站安全起重要作用的可编程数字计算机
| Programmed digital computers important to safety for nuclear power stations
|
| IEC 61131-1-2003
| 可编程控制器 第1部分:一般说明
| Programmable controllers - Part 1: General information
|
| IEC 61131-2 Corrigendum 1-2004
| 可编程控制器.第2部分:设备要求和试验.技术勘误1
| Programmable controllers - Part 2: Equipment requirements and tests; Corrigendum 1
|
| IEC 61131-5-2000
| 可编程控制器 第5部分:通信
| Programmable controllers - Part 5: Communications
|
| IEC 61131-7-2000
| 可编程控制器 第7部分:模糊控制编程
| Programmable controllers - Part 7: Fuzzy control programming
|
| IEC 61508-1 Corrigendum 1-1999
| 电气/电子/可编程电子安全相关系统的功能安全.第1部分:一般要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
|
| IEC 61508-1-1998
| 电气/电子/可编程电子安全相关系统的功能安全 第1部分:一般要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
|
| IEC 61508-2-2000
| 电气/电子/可编程电子安全相关系统的功能安全 第2部分:电气/电子/可编程电子安全相关系统的要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
|
| IEC 61508-3 Corrigendum 1-1999
| 电气/电子/可编程电子安全相关系统的功能安全.第3部分:软件要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
|
| IEC 61508-3-1998
| 电气/电子/可编程电子安全相关系统的功能安全 第3部分:软件要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
|
| IEC 61508-4 Corrigendum 1-1999
| 电气/电子/可编程电子安全相关系统的功能安全.第4部分:定义和缩略语
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
|
| IEC 61508-4-1998
| 电气/电子/可编程电子安全相关系统的功能安全 第4部分:定义和缩略语
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
|
| IEC 61508-5 Corrigendum 1-1999
| 电气/电子/可编程电子安全相关系统的功能安全.第5部分:确定安全整体水平方法的实例
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels
|
| IEC 61508-5-1998
| 电气/电子/可编程电子安全相关系统的功能安全 第5部分:确定安全整体水平方法的实例
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels
|
| IEC 61508-6-2000
| 电气/电子/可编程电子安全相关系统的功能安全 第6部分:IEC 61508-2和IEC 61508-3的应用指南
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
|
| IEC 61508-7-2000
| 电气/电子/可编程电子安全相关系统的功能安全 第7部分:技术和措施综述
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
|
| IEC 62061 Corrigendum 1-2005
| 机械安全.与安全有关的电气、电子和可编程序电子控制系统的功能安全.勘误1
| Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems; Corrigendum 1
|
| IEC 62061-2005
| 机械安全.与安全有关的电气、电子和可编程序电子控制系统的功能安全
| Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
|
| IEC/TR 61131-4-2004
| 可编程控制器.第4部分:用户指南
| Programmable controllers - Part 4: User guidelines
|
| IEC/TR 61131-8-2003
| 可编程控制器.第8部分:编程语言的执行和应用指南
| Programmable controllers - Part 8: Guidelines for the application and implementation of programming languages
|
| IEC/TR 61508-0-2005
| 电气/电子/可编程序电子安全相关系统的功能安全性.第0部分:功能安全性和IEC 61508
| Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508
|
| IEEE 488.2-1992
| 与IEEE 488.1-87“可编程序设备的数字接口“一同使用的代码、格式、协议和通用命令
| (Codes, formats, protocols and common commands for use with IEEE 488.1-1987 “Digital interface for programmable instrumentation“)
|
| ISO 17894-2005
| 船舶和海上技术.计算机应用.海上用可编程电子系统的开发和使用总则
| Ships and marine technology - Computer applications - General principles for the development and use of programmable electronic systems in marine applications
|
| JIS B3500-1990
| 可编程控制器术语汇编
| Glossary of terms used in programmable controller
|
| JIS B3501-2004
| 可编程控制器.第1部分:通用信息
| Programmable controllers -- Part 1: General information
|
| JIS B3502-2004
| 可编程控制器.设备要求和试验
| Programmable controllers -- Equipment requirements and tests
|
| JIS B3503-1997
| 可编程序控制器.程序设计语言
| Programmable controllers -- Programming languages
|
| JIS B3511-1999
| 可编程序控制器.现场网络标准(1级)
| Programmable controllers -- Field network standard (Level 1)
|
| JIS B3512-1999
| 可编程序控制器.现场网络标准的试验和检定(1级)
| Programmable controllers -- Test and verification of field network standard (Level 1)
|
| JIS B3551-1998
| 可编程序显示.词汇
| Programmable display -- Vocabulary
|
| JIS C0508-1-1999
| 电气/电子/可编程电子安全相关系统的功能安全性.第1部分:一般要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 1: General requirements
|
| JIS C0508-3-2000
| 电气/电子/可编程电子安全相关系统的功能安全性.第3部分:软件要求
| Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 3: Software requirements
|
| JIS C0508-4-1999
| 电气/电子/可编程电子安全相关系统的功能安全性.第4部分:定义和缩写
| Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 4: Definitions and abbreviations
|
| JIS C0508-5-1999
| 电气/电子/可编程电子安全相关系统的功能安全性.第5部分:安全性整体水平测定方法举例
| Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 5: Examples of methods for the determination of safety integrity levels
|
| JIS C1901-1987
| 可编程测量仪的接口系统
| An interface system for programmable measuring instruments
|
| NF C46-061-2002
| 电气/电子/可编程序的电子安全相关系统的功能安全.第1部分:一般要求
| (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1 : general requirements.)
|
| NF C46-062-2002
| 电气/电子/可编程序的电子安全相关系统的功能安全.第2部分:电气/电子/可编程序的电子安全相关系统的要求
| (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2 : requirements for electrical/electronic/programmable electronic safety-related systems.)
|
| NF C46-063-2002
| 电气/电子/可编程序的电子安全相关系统的功能安全.第3部分:软件要求
| (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3 : software requirements.)
|
| NF C46-064-2002
| 电气/电子/可编程序的电子安全相关系统的功能安全.第4部分:定义和缩写
| (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4 : definitions and abbreviations.)
|
| NF C46-065-2002
| 电气/电子/可编程序的电子安全相关系统的功能安全.第5部分:安全整体水平测定方法的实例
| (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5 : examples of methods for the determination of safety integrity levels.)
|
| NF C46-066-2002
| 电气/电子/可编程序的电子安全相关系统的功能安全.第6部分:IEC 61508-2和IEC 61508-3的应用指南
| (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6 : guidelines on the application of IEC 61508-2 and IEC 61508-3.)
|
| NF C46-067-2002
| 电气/电子/可编程序的电子安全相关系统的功能安全.第7部分:技术和测量综述
| (Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7 : overview of techniques and measures.)
|
| NF C46-603-1990
| 发送器,致动器和可编程序控制器间信息交换用文件传送协议总线.数据链层
| (Fip bus for exchange of information between transmitters, actuators and programmable controllers. Data link layer.)
|
| NF C46-613-1994
| 可编程控制器.第1部分:一般信息
| (Programmable controllers. Part 1 : general information.)
|
| NF C46-617-2001
| 可编程控制器.第5部分:通信
| (Programmable controllers - Part 5 : communications.)
|
| NF C46-619-2001
| 可编程控制器.第7部分:模糊控制编程
| (Programmable controllers - Part 7 : fuzzy control programming.)
|
| NF C74-015-1999
| 医用电气设备.第1部分:安全的一般要求.补充标准4: 可编程的电气医用系统
| (Medical electrical equipment - Part 1 : general requirements for safety - 4 - Collateral standard : programmable electrical medical systems.)
|
| NF C86-251-1987
| 电子元器件质量评定协调体系.熔接可编程只读存储器.空白详细规范
| (Harmonized system of quality assessment for electronic components. Fusible link programmable read only memories. Blank detail specification.)
|
| NF C86-252-1987
| 电子元件.ＣＥＮＥＬＥＣ质量保证体系.集成电路可抹只读存储器和可编程序存储器.特殊规范
| (HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. MOS ULTRA-VIOLET LIGHT ERASABLE ELECTRICALLY PROGRAMMABLE READ ONLY MEMORIES SILICON MONOLITHIC CIRCUITS BLANK DETAIL SPECIFICATION. (SPECIFICATION CECC 90 113).)
|
| NF C86-255-1991
| 电子元件.CENELEC质量保证体系.可编程序逻辑网络范围.特殊规范
| (HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS PROGRAMMABLE LOGIC ARRAYS (PLA). BLANK DETAIL SPECIFICATION.(SPECIFICATION CECC 90 114).)
|
| PD IEC TR 61131-8-2000
| 可编程控制器.编程语言的应用和执行指南
| Programmable controllers. Guidelines for the application and implementation of programming languages
|
| prEN 190105-1993
| 空白详细规范：熔丝式可编程双极只读存储器硅单片集成电路
| Blanc detail specification: fusible link programmable bipolar Read Only Memories, silicon monolithic integrated circuits (CECC 90105:1986)
|
| prEN 190113-1991
| 空白详细规范：MOS紫光擦除可编程只读存储器硅单片电路(包括EEPROMS)
| Blank detail specification: MOS ultra-violet light erasable electrically programmable read only memories, silicon monolithic circuits (covering EEPROMS)
|
| prEN 190114-1993
| 空白详细规范：可编程逻辑阵列
| Blanc detail specification: programmable logic arrays (PLA) (CECC 90114:1990)
|
| 编号 | 中文名称 | 英文名称 |
|---|