| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI X3.163-1988
| 信息系统.接触启动/停止金属膜片存储盘.83333传输通量/道,外径为130mm(5.118英寸),内径为40mm(1.575英寸)
| Information Systems - Contact Start-Stop Metallic Film Storage Disk - 83 333 Flux Transitions Per Track 130-mm (5.118-in) Outer Diameter and 40-mm (1.575-in) Inner Diameter
|
| ANSI X3.179-1990
| 信息系统.接触启动/停止金属膜片存储盘.外径为95mm(0.3740英寸)和内径为25mm(0.984英寸),厚度为1.27mm(0.05
| Information Systems - Contact Start-Stop Metallic Thin-Film Storage Disk - 83 333 Flux Transitions per Track 95-mm (3.740-in) Outer Diameter and 25-mm (0.984-in) Inner Diameter and 1.27-mm (0.050-in) Thickness
|
| ANSI/IPC 4203-2002
| 作柔性印制线路和柔性粘合膜片覆盖层用的涂粘合剂的绝缘膜
| Adhesive coated Dielectric Films for Use as Cover Sheets for Flexible Printed Wiring and Flexible Adhesive Bonding Films
|
| BS 2797-1976
| 煤气表膜片用皮革规范
| Specification for leathers for gas meter diaphragms
|
| BS EN 13597-2003
| 铁路设施.橡胶悬吊元件.气动悬簧的橡胶膜片
| Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
|
| BS EN 278-1991
| 采用压力达200毫巴可燃气体的家用器具膜片用橡胶材料规范
| Specification for rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar
|
| DIN 28432-1996
| 真空技术.膜片真空泵验收规范
| Vacuum technology - Acceptance specifications for diaphragm vacuum pumps
|
| DIN 53366-1983
| 塑料薄膜和膜片的检验.粘连强度的测定
| Testing of plastic films and sheetings; determination of blocking strength
|
| DIN EN 13597-2003
| 铁路设施.橡胶悬吊元件.气动悬吊弹橡胶膜片
| Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs; German version EN 13597:2003
|
| DIN EN 196500/A1-2002
| 分规范.包括空白详细规范的膜片开关 EN 196501; 修改件 A1; 德文版本 EN 196500/A1:2001
| Sectional specification: Membrane switches including blank detail specification EN 196501; Amendment A1; German version EN 196500/A1:2001
|
| DIN EN 549-1995
| 燃气灶具和燃气器具用密封件和膜片的橡胶材料; 德文版本 EN 549:1994
| Rubber materials for seals and diaphragms for gas appliances and gas equipmemt; German version EN 549:1994
|
| DIN EN 837-3-1997
| 压力计.第3部分:膜片和膜盒式压力计.尺寸、测量技、要求和试验
| Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996
|
| EN 13597-2003
| 铁路设施 橡胶悬挂部件 气压悬挂弹簧橡胶膜片
| Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
|
| HG/T 2178-1991
| 家用煤气表橡胶膜片
| ()
|
| HG/T 3692-2001
| 金属膜片式稳压阀技术条件
| ()
|
| HG/T 3693-2001
| 橡胶膜片式稳压阀技术条件
| ()
|
| ISO 11866-2-2005
| 乳和乳制品.推定大肠杆菌的菌落计数.第2部分:在44℃时利用膜片(进行的)菌落计数技术
| Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2: Colony-count technique at 44 °C using membranes
|
| ISO 4929-1978
| 道路车辆 使用非石油基液压制动液的液压制动主液压缸储油器的膜片密封垫
| Road vehicles; Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
|
| JB/T 5491-2005
| 膜片压力表
| ()
|
| JB/T 7485-2007
| 金属膜片
| Metal diaphragm
|
| JB/T 9147-1999
| 膜片联轴器
| ()
|
| JIS D2610-2005
| 汽车部件.使用非石油基液压制动液体的液压制动主油缸储油箱用膜片衬垫
| Automotive parts -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
|
| NF D36-203-1991
| 制作200mbar以下压力家用燃气设备用膜片的橡胶材料.(欧洲标准 EN 278)
| (RUBBER MATERIALS FOR DIAPHRAGMS IN DOMESTIC APPLIANCES USING COMBUSTIBLE GASES UP TO 200 MBAR. (EUROPEAN STANDARD EN 278).)
|
| NF D36-205-1995
| 燃气器具的密封和膜片用橡胶材料
| (Rubber materials for seals and diaphragms for gas appliances and gas equipment.)
|
| NF F01-816-2003
| 铁路设施.橡胶悬吊元件.气动悬吊弹簧的橡胶膜片
| (Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs.)
|
| NF F18-805-1992
| 铁路滚动器材.气动悬置弹簧的橡胶膜片
| (RAILWAY ROLLING STOCK. RUBBER DIAPHRAGMS FOR PNEUMATIC SUSPENSION SPRINGS.)
|
| QC/T 249-1998(2005)
| 机械膜片式汽油泵试验方法
| ()
|
| QC/T 478-1999(2005)
| 机械膜片式汽油泵凸缘的安装尺寸
| ()
|
| prEN 13831-2000
| 供水系统中设备用带内置膜片的封闭式膨胀容器
| Closed expansion vessels with built in diaphragm for installations in water systems
|
| 编号 | 中文名称 | 英文名称 |
|---|