| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI B11.9-1975 | 机床.磨床的制造、维护和使用的安全要求 | Safety Requirements for the Construction, Care and Use of Grinding Machines |
| ANSI B28.1-2000 | 橡胶工业中磨床和砑光机的安全规范 | Safety Specifications for Mills and Calenders in the Rubber Industry |
| ANSI B5.32-1977 | 往复台式平面磨床的名称与牌号及加工范围 | Surface Grinding Machines of the Reciprocating Table Type, Designation and Working Ranges of |
| ANSI B5.32.1-1977 | 立轴往复台式平面磨床 | Grinding Machines, Surface, Reciprocating Table - Vertical Spindle |
| ANSI B5.37-1970 | 无心外圆磨床 | External Cylindrical Grinding Machines - Centerless |
| ANSI B5.42-1981 | 万能外圆磨床 | External Cylindrical Grinding Machines - Universal |
| ANSI/OPEI B71.6-2000 | 电动食品磨碎机/研磨机和食品磨碎机/装袋机的安全规范 | Powered Shredder/Grinders and Shredder/Baggers, Safety Specifications |
| ANSI/UL 1017-2006 | 真空吸尘器、吹风式吸尘器和家用地板抛光机的标准（推荐日期11-18-05） | Standard for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines (proposals dated 11-18-05) |
| ANSI/UL 60745-2-3-2007 | 手持式电动机带动的电动工具.安全性.第2-3部分:研磨机、抛光机和盘砂轮机的特殊要求 | Hand-Held Motor-Operated Electrical Tools - Safety - Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders |
| ANSI/UL 60745-2-3-2007 | 手持式电动机带动的电动工具.安全性.第2-3部分:研磨机、抛光机和盘砂轮机的特殊要求 | Hand-Held Motor-Operated Electrical Tools - Safety - Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders |
| ANSI/UL 60745-2-4-2006 | 手持式电动工具.安全.第2-4部分:盘式除外的打磨机和抛光机的特殊要求 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type |
| ANSI/UL 745-2-3-2006 | 研磨机、抛光机和盘式砂轮机特殊要求的安全标准 | Standard For Safety For Particular Requirements for Grinders, Polishers and Disk-Type Sanders |
| ANSI/UL 745-2-3-2006 | 研磨机、抛光机和盘式砂轮机特殊要求的安全标准 | Standard For Safety For Particular Requirements for Grinders, Polishers and Disk-Type Sanders |
| ASME B5.33-1981 | 普通外圆磨床 | (External cylindrical grinding machines - Plain) |
| ASME B5.42-1981 | 万能外圆磨床 | (External cylindrical grinding machines - Universal) |
| ASME B5.53M-1982 | 刀具和工具磨床 | (Cutter and tool grinding machines) |
| ASTM D 387-2000 | 使用机械研磨机测定有色颜料主色和着色强度的标准试验方法 | Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller |
| ASTM D 5963-2004 | 橡胶性能的标准试验方法.耐磨性(旋转滚筒式研磨机) | Standard Test Method for Rubber Property - Abrasion Resistance (Rotary Drum Abrader) |
| ASTM E 1393-1990 | 用尖状往复式抛光机械测定沥青路面及样品精整性的试验方法 | Test Method for Determining the Polishability of Bituminous Pavement Surfaces and Specimens by Means of the Penn State Reciprocating Polishing Machine |
| BS 1089-1973 | 外圆、内圆与万能磨床的转盘主轴头规范 | Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types |
| BS 4581-2-1984 | 磨床砂轮安装用法兰.第2部分:76.2mm以下孔径砂轮用法兰尺寸和材料规范 | Flanges for mounting grinding wheels on grinding machine tools - Specification for dimensions and materials of flanges for grinding wheels of less than 76.2 mm bore |
| BS 4656-9-1974 | 机床精度及试验方法.第9部分:往复台式外圆磨床 | Accuracy of machine tools and methods of test - External cylindrical grinding machines with reciprocating table |
| BS EN 13218-2002 | 机床.安全性.固定式磨床 | Machine tools - Safety - Stationary grinding machines |
| BS EN 13900-4-2004 | 颜料和填充剂.扩散方法和在塑料中可扩散性的评定.用双辊研磨机测定聚乙烯中白颜料的颜色性能和易扩散性 | Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling |
| BS EN 1417-1997 | 橡胶和塑料加工机械.双辊研磨机的安全性要求 | Rubber and plastics machines - Two roll mills - Safety requirements |
| BS EN 14958-2006 | 食品加工机械.研磨加工面粉和粗粒小麦粉用磨床 | Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements |
| BS EN 50144-2-3-2002 | 手持电动工具的安全.研磨机、圆盘砂轮机和抛光机的特殊要求 | Safety of hand-held electric motor operated tools - Particular requirements for grinders, disk type sanders and polishers |
| BS EN 50144-2-3-2002 | 手持电动工具的安全.研磨机、圆盘砂轮机和抛光机的特殊要求 | Safety of hand-held electric motor operated tools - Particular requirements for grinders, disk type sanders and polishers |
| BS EN 60745-2-3-2007 | 手持式机动电动工具.安全.研磨机、抛光机和盘型砂轮机的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for grinders, polishers and disk-type sanders |
| BS EN 60745-2-3-2007 | 手持式机动电动工具.安全.研磨机、抛光机和盘型砂轮机的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for grinders, polishers and disk-type sanders |
| BS EN 60745-2-4-2003 | 手持式电动工具的安全.盘式除外的砂轮机和抛光机的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for sanders and polishers other than disk type |
| BS EN 61029-2-4-2003 | 移动式电动工具的安全.台式磨床的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for bench grinders |
| BS EN 792-7-2001 | 手持式非电动工具.安全要求.第7部分:研磨机 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
| BS EN 792-8-2001 | 手持非电动工具.安全性要求.砂轮机和抛光机 | Hand-held non-electric power tools - Safety requirements - Sanders and polishers |
| BS EN 792-9-2001 | 手持非电动工具.安全性要求.冲压磨床 | Hand-held non-electric power tools - Safety requirements - Die grinders |
| BS EN ISO 8662-13-1997 | 便携式手提动力工具.手柄振动测量.模具研磨机 | Hand-held portable power tools - Measurement of vibrations at the handle - Die grinders |
| BS EN ISO 8662-4-1995 | 便携式手提动力工具.手柄振动的测量.第4部分:磨床 | Hand-held portable power tools - Measurement of vibrations at the handle - Grinding machines |
| BS EN ISO 8780-4-1991 | 颜料和稀释剂.色散特性评定用色散方法.第4部分:研磨机评定色散 | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using a bead mill |
| BS EN ISO 8780-5-1991 | 颜料和稀释剂.色散特性评定用色散方法.第5部分:自动研磨机评定色散 | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using an automatic muller |
| BS ISO 1985-1998 | 机床.设有立式磨床心轴和往复式工作台的平面磨床试验条件.精度试验 | Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy |
| BS ISO 1986-1-2001 | 卧轴矩台平面磨床的验收条件.精度检验.工作台长度达到1600mm的机床 | Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Machines with a table length of up to 1600mm |
| BS ISO 2407-1998 | 卧式心轴内圆磨床的试验条件.精度试验 | Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy |
| BS ISO 3875-2004 | 机械工具.外圆无心磨床的试验条件.精度检验 | Machine tools - Test conditions for external cylindrical centreless grinding machines - Testing of the accuracy |
| BS ISO 4703-2001 | 双柱式平面磨床的验收条件.导轨磨床.精度试验 | Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy |
| BS ISO 603-13-1999 | 粘合磨料产品.尺寸.立式磨床去除和整修毛刺用砂轮 | Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling on a vertical grinder |
| DIN 45635-1610-1984 | 机器空气噪声的测量.包络面法.金属加工机床.磨床的特殊规定 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines grinding machines |
| DIN 6374-1980 | 磨床心轴. | Grinding machine mandrels |
| DIN 69718-1-1976 | 机床.第1部分:外圆磨床.定义和术语 | Machine Tools; External Cylindrical Grinding Machines; Definitions and Terms |
| DIN 69718-2-1977 | 机床.卧轴平面磨床.定义和术语 | Machine Tools; Surface Grinding Machines with Horizontal Grinding Spindle; Definitions and Terms |
| DIN 69718-3-1977 | 机床.无心外圆磨床.定义和术语 | Machine Tools; Centreless External Cylindrical Grinding Machines; Definitions and Terms |
| DIN 8630-1988 | 机床.带活动工作台的外圆磨床.验收条件 | Machine tools; external cylindrical grinding machines with a movable workpiece table; acceptance conditions |
| DIN 8632-1-1989 | 机床.卧式活动矩形台平面磨床.验收条件 | Machine tools; surface grinding machines with horizontal grinding wheel spindle and rectangular reciprocating table; acceptance conditions |
| DIN 8632-3-1976 | 机床.带卧式磨轮轴的平面磨床.验收条件 | Machine Tools; Surface Grinding Machines with Horizontal Grinding Wheel Spindle, with Round Table; Acceptance Conditions |
| DIN 8632-4-1978 | 机床.平面磨床.双立柱平面磨床.导轨磨床.验收条件 | Machine Tools; Surface Grinding Machines; Surface Grinding Machines with Two Columns; Grinding-machines for Grinding Slideways; Acceptance Conditions |
| DIN 8633-3-1977 | 机床.立式砂轮回转和圆形工作台的平面磨床.验收条件 | Machine Tools; Surface Grinding Machines with Vertical Grinding Wheel Spindle and Round Table; Acceptance Conditions |
| DIN 8634-1994 | 机床.无心外圆磨床.验收条件 | Machine tools; external cylindrical centreless grinding machines; acceptance conditions |
| DIN EN 1034-22-2005 | 机械安全.纸张制造和整饰机械设计和建造的安全要求.第22部分:木制研磨机 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders; German version EN 1034-22:2005 |
| DIN EN 13218-2002 | 机床.安全性.固定式磨床; 德文版本 EN 13218:2002 | Machine tools - Safety - Stationary grinding machines; German version EN 13218:2002 |
| DIN EN 13900-4-2004 | 颜料和稀释剂.扩散方法和在塑料中可扩散性的评估.第4部分:由双滚研磨机测定聚乙烯中的白颜料的颜色性能和易 | Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling; German version EN 13900-4:2004 |
| DIN EN 60745-2-3-2007 | 手持式电动工具.安全.第2-3部分:研磨机、抛光机和盘型砂轮机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified); German version EN 60745-2-3:2007 |
| DIN EN 60745-2-3-2007 | 手持式电动工具.安全.第2-3部分:研磨机、抛光机和盘型砂轮机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified); German version EN 60745-2-3:2007 |
| DIN EN 60745-2-4-2004 | 手持式电动工具的安全.第2-4部分:盘形除外的砂轮磨光机和抛光机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type (IEC 60745-2-4:2002, modified); German version EN 60745-2-4:2003 |
| DIN EN 792-7-2002 | 手持式非电动工具.安全要求.第7部分:研磨机; 德文版本 EN 792-7:2001 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders; German version EN 792-7:2001 |
| DIN EN 792-8-2001 | 手持式非电动工具.安全性要求.第8部分:抛光机和砂轮磨具 | Hand-held non-electric power tools - Safety requirements - Part 8: Polishers and sanders; German version EN 792-8:2001 |
| DIN EN 792-9-2001 | 手持式非电动工具.安全性要求.第9部分:模具研磨机 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders; German version EN 792-9:2001 |
| DIN EN ISO 8662-4-1995 | 手提式便携电动工具.手柄振动的测量.第4部分:磨床 (ISO 8662-4:1994); 德文版本 EN ISO 8662-4:1995 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994); German version EN ISO 8662-4:1995 |
| DIN EN ISO 8780-5-1995 | 颜料和稀释剂.色散特性评估用色散方法.第5部分:色散用自动研磨机 (ISO 8780-5:1990); 德文版本 EN ISO 8780 | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990); German version EN ISO 8780-5:1995 |
| DIN ISO 15637-1-2004 | 筒形研套的夹紧装置.第1部分:手持式研磨机用带柄的夹紧装置 | Holding fixtures of cylindrical abrasive sleeves - Part 1: Holding fixtures with shank for hand-held grinding machines (ISO 15637-1:2002) |
| DIN ISO 15637-2-2004 | 筒形砂套的夹紧装置.第2部分:固定磨床的夹紧装置 | Holding fixtures of cylindrical abrasive sleeves - Part 2: Holding fixtures for stationary machines (ISO 15637-2:2002) |
| DIN ISO 1985-1999 | 机床.立轴往复工作台的平面磨床的检验条件.精度检验 | Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy (ISO 1985:1998) |
| DIN ISO 2407-1999 | 机床.有水平轴的内圆磨床的试验条件.精度试验 | Machine tools - Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy (ISO 2407:1997) |
| EN 13218-2002 | 机床 安全性 固定磨床 | Machine tools - Safety - Stationary grinding machines |
| EN 1813-1997 | 铺地织物 用研磨机器对羊毛纤维完整性的测定 | Textile floor coverings - Determination of wool fibre integrity using an abrasion machine |
| EN 27787-3-1993 | 牙科旋转器械 切割工具 第3部分：技工室研磨机用质合金刀具 | Dental rotary instruments; Cutters; Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991) |
| EN 50144-2-3-2002 | 手持电动工具的安全性 第2-3部分：研磨机、圆盘磨光机和抛光机的特殊要求 | Safety of hand-held electric motor operated tools - Part 2-3: Particular requirements for grinders, disk type sanders and polishers |
| EN 50144-2-3-2002 | 手持电动工具的安全性 第2-3部分：研磨机、圆盘磨光机和抛光机的特殊要求 | Safety of hand-held electric motor operated tools - Part 2-3: Particular requirements for grinders, disk type sanders and polishers |
| EN 60745-2-4-2003 | 手持电动工具 安全 第2-4部分：除圆盘型以外的磨光机和抛光机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type (IEC 60745-2-4:2002, modified) |
| EN 792-7-2001 | 手持式非电动工具 安全要求 第7部分：研磨机 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
| EN 792-8-2001 | 手持式非电动工具 安全要求 第8部分：抛光机和磨沙机 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers |
| EN 792-9-2001 | 手持式非电动工具 安全要求 第9部分：硬模研磨机 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
| EN ISO 8662-13-1997 | 便携式手提动力工具 手柄振动测量 第13部分：模具研磨机 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997) |
| EN ISO 8662-4-1995 | 便携式手提动力工具 手柄振动测量 第4部分：磨床 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994) |
| EN ISO 8662-8-1997 | 便携式手提动力工具 手柄振动测量 第8部分：抛光机和旋转式轨道和特殊轨道磨光机 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997) |
| EN ISO 8780-4-1995 | 颜料和体质颜料 评定分散性的分散方法 第4部分：用压研磨机分散 | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990) |
| EN ISO 8780-5-1995 | 颜料和体质颜料 评定分散性的分散方法 第5部分：用自动研磨机分散 | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990) |
| EN ISO 8780-6-1995 | 颜料和体质颜料 评定分散性的分散方法 第6部分：用三辕研磨机分散 | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990) |
| GB 3883.3-2007 | 手持式电动工具的安全 第二部分：砂轮机、抛光机和盘式砂光机的专用要求 | Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for grinders, polishers and disk-type sanders |
| GB 3883.4-2005 | 手持式电动工具的安全第二部分:非盘式砂光机和抛光机的专用要求 | Safety of hand-held motor-operated electric tools Part 2:Particular requirements for sanders and polishers other than disk type |
| GB/T 4022.1-2007 | 卧轴矩台平面磨床 精度检验 第1部分：工作台面长度至1600mm的机床 | Surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1：Machines with a table surface length of up to 1600 mm |
| GB/T 4681-2007 | 无心外圆磨床 精度检验 | External cylindrical centreless grinding machines - Testing of the accuracy |
| GB/T 4682-2007 | 内圆磨床 精度检验 | Internal cylindrical grinding machines with horizontal spindle - Testing of the accuracy |
| GB/T 4685-2007 | 外圆磨床 精度检验 | External cylindrical grinding machines - Testing of the accuracy |
| GB/T 5288-2007 | 龙门导轨磨床 精度检验 | Slideways grinding machines with two columns - Testing of the accuracy |
| GB/T 6476-2007 | 立轴矩台平面磨床 精度检验 | Surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy |
| GB/T 6477.6-1986 | 金属切削机床术语磨床 | Terminology for metal-cutting machine tools--Grinding machines |
| IEC 60745-2-3-2006 | 手持式电动工具的安全 第2-3部分:电动砂轮机、抛光机和盘式砂光机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders |
| IEC 60745-2-4-2006 | 手持式电动工具的安全.第2-4部分:盘式除外的砂轮机和抛光机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type |
| ISO 1985-1998 | 机床 立轴矩台平面磨床检验条件 精度检验 | Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy |
| ISO 1986-1-2001 | 带有卧轴和往复式台的平面磨床的检验条件 精度检验 第1部分：台长为1600mm以下的磨床 | Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1: Machines with a table length of up to 1600 mm |
| ISO 2407-1997 | 卧轴内圆磨床检验条件 精度检验 | Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy |
| ISO 2433-1999 | 机床 工作台移动式万能外圆磨床检验条件 精度检验 | Machine tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy |
| ISO 3875-2004 | 机床.外圆无心磨床试验条件.精度检验 | Machine tools - Test conditions for external cylindrical centreless grinding machines - Testing of the accuracy |
| ISO 4703-2001 | 两柱式表面磨床检验条件 导轨磨床 精度检验 | Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy |
| ISO 7787-3-1991 | 牙科旋转器械 切割工具 第3部分:技工室研磨机用硬质合金刀具 | Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines |
| ISO 8662-13 Technical Corrigendum 1-1998 | 便携式手提动力工具 手柄振动测量 第13部分:模具研磨机 技术勘误1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders; Technical Corrigendum 1 |
| ISO 8662-13-1997 | 便携式手提动力工具 手柄振动测量 第13部分:模具研磨机 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders |
| ISO 8662-4-1994 | 便携式手提动力工具 手柄振动测量 第4部分:磨床 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders |
| ISO 8662-8-1997 | 便携式手提动力工具 手柄振动测量 第8部分:抛光机和旋转式轨道和特殊轨道磨光机 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders |
| ISO 8780-4-1990 | 颜料和体质颜料.评定分散性的分散方法.第4部分:用压研磨机分散 | Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 4: dispersion using a bead mill |
| ISO 8780-5-1990 | 颜料和体质颜料.评定分散性的分散方法.第5部分:用自动研磨机分散 | Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 5: dispersion using an automatic muller |
| ISO 8780-6-1990 | 颜料和体质颜料.评定分散性的分散方法.第6部分:用三辕研磨机分散 | Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 6: dispersion using a triple-roll mill |
| ISO/TR 27609-2007 | 手持工具的振动.研磨机振动测量方法.系列试验评估 | Vibration in hand-held tools - Vibration measurement methods for grinders - Evaluation of round-robin test |
| JB 4029-2000 | 磨床砂轮防护罩 安全技术要求 | () |
| JB/T 10122-1999 | 机床夹具零件及部件 磨床用快换卡头 | () |
| JB/T 10142-1999 | 超声抛光机 技术条件 | () |
| JB/T 10578-2006 | 导轨磨床 参数 | () |
| JB/T 10602.1-2006 | 龙门平面磨床 第1部分：参数 | Double column surface grinding machines-Part 1:Parameters |
| JB/T 10602.2-2007 | 龙门平面磨床 第2部分：精度检验 | () |
| JB/T 10602.3-2007 | 龙门平面磨床 第3部分：技术条件 | () |
| JB/T 10790.1-2007 | 数控强力成形磨床 第1部分：型式与参数 | CNC creep feed profile grinding machines-Part 1:Types and parameters |
| JB/T 10790.2-2007 | 数控强力成形磨床 第2部分：精度检验 | CNC creep feed profile grinding machines-Part 2:Testing of the accuracy |
| JB/T 10790.3-2007 | 数控强力成形磨床 第3部分：技术条件 | CNC creep feed profile grinding machines-Part 3:Specifications |
| JB/T 1579-1999 | 精密卧轴矩台平面磨床 精度检验 | () |
| JB/T 2617.1-1999 | 曲轴磨床 参数 | () |
| JB/T 2617.2-1999 | 曲轴磨床 精度检验 | () |
| JB/T 2617.3-2007 | 曲轴磨床 第3部分：技术条件 | Crankshaft grinder-Part 3:Specifications |
| JB/T 2858.1-1999 | 螺纹磨床 参数 | () |
| JB/T 2858.3-1999 | 螺纹磨床 精度检验 | () |
| JB/T 2858.4-1999 | 螺纹磨床 技术条件 | () |
| JB/T 2903.1-2007 | 丝锥磨床 第1部分：型式与参数 | Tap grinding machines-Part 1:Tyes and parameters |
| JB/T 2903.2-2007 | 丝锥磨床 第2部分：精度检验 | Tap grinding machines-Part 2:Testing of the accuracy |
| JB/T 2903.3-2007 | 丝锥磨床 第3部分：技术条件 | () |
| JB/T 2999.1-1998 | 凸轮轴磨床 参数 | () |
| JB/T 2999.2-1998 | 凸轮轴磨床 精度检验 | () |
| JB/T 2999.3-1998 | 凸轮轴磨床 技术条件 | () |
| JB/T 3382.2-2000 | 卧轴矩台平面磨床 技术条件 | () |
| JB/T 3382.3-2006 | 卧轴矩台平面磨床 第3部分：参数 | () |
| JB/T 3870.1-1999 | 卡规磨床 精度检验 | () |
| JB/T 3870.2-2007 | 卡规磨床 第2部分：技术条件 | Calipers grinding machine-Part 2:Specifications |
| JB/T 3875.1-1999 | 万能工具磨床 参数 | () |
| JB/T 3875.2-1999 | 万能工具磨床 精度检验 | () |
| JB/T 3875.3-2007 | 万能工具磨床 第3部分：技术条件 | Universal tool and cutter grinding machines-Part 3:Specifications |
| JB/T 4065.1-1999 | 滚刀铲磨床 参数 | () |
| JB/T 4065.3-1999 | 滚刀铲磨床 精度检验 | () |
| JB/T 4065.4-1999 | 滚刀铲磨床 技术条件 | () |
| JB/T 4071.1-2007 | 轴承套圈磨床 第1部分：外表面磨床 精度检验 | Grinding machines for bearing ring-Part 1: Outer surface grinding machines-Testing of the accuracy |
| JB/T 4071.2-2007 | 轴承套圈磨床 第2部分：内表面磨床 精度检验 | Grinding machines for bearing ring-Part 2: Inner surface grinding machines-Testing of the accuracy |
| JB/T 4071.3-2007 | 轴承套圈磨床 第3部分：技术条件 | () |
| JB/T 4096-1999 | 高精度卧轴矩台平面磨床 精度检验 | () |
| JB/T 4145.1-1999 | 落地导轨磨床 精度检验 | () |
| JB/T 4145.2-1999 | 落地导轨磨床 技术条件 | () |
| JB/T 4147-1999 | 龙门导轨磨床 技术条件 | () |
| JB/T 4183.2-1999 | 立轴矩台平面磨床 技术条件 | () |
| JB/T 4183.3-2006 | 立轴矩台平面磨床 第3部分：参数 | () |
| JB/T 6090-2007 | 抛光机 | () |
| JB/T 6091.1-2007 | 坐标磨床 第1部分：参数 | () |
| JB/T 6091.2-2007 | 坐标磨床 第2部分：精度检验 | () |
| JB/T 6091.3-2007 | 坐标磨床 第3部分：技术条件 | () |
| JB/T 6197.1-1999 | 剪切刀片刃磨床 精度检验 | () |
| JB/T 6197.2-1999 | 剪切刀片刃磨床 技术条件 | () |
| JB/T 6197.3-2007 | 剪切刀片刃磨床 第3部分：型式与参数 | Shearing cutter sharpening machines-Part 3:Types and parameters |
| JB/T 6340.1-2008 | 轧辊磨床 第1部分：型式与参数 | Roll grinding machine-Part 1:Types and parameters |
| JB/T 6340.2-2007 | 轧辊磨床 第2部分：砂轮架移动式轧辊磨床 技术条件 | () |
| JB/T 6340.3-2008 | 轧辊磨床 第3部分：砂轮架移动式磨床精度检验 | Roll grinding machine-Part 3:Grinding machine with wheelhead moving style-Testing of the accuracy |
| JB/T 7418.1-2006 | 外圆磨床 第1部分：参数 | () |
| JB/T 7418.2-2007 | 外圆磨床 第2部分：技术条件 | () |
| JB/T 8078-1999 | 轴承外圈内表面磨床 参数 | () |
| JB/T 8079.1-1999 | 轴承内圈外表面磨床 参数 | () |
| JB/T 8080-1999 | 轴承内圈内表面磨床 参数 | () |
| JB/T 8826-1998 | 磨床动静压支承润滑油箱 | () |
| JB/T 9161.1-1999 | 外圆磨床顶尖 尺寸 | () |
| JB/T 9161.10-1999 | 内圆磨床接杆用螺钉 尺寸 | () |
| JB/T 9161.2-1999 | 外圆磨床平顶尖 尺寸 | () |
| JB/T 9161.3-1999 | 内圆磨床接杆 A型 尺寸 | () |
| JB/T 9161.4-1999 | 内圆磨床接杆 B型 尺寸 | () |
| JB/T 9161.5-1999 | 内圆磨床接杆 C型 尺寸 | () |
| JB/T 9161.6-1999 | 内圆磨床接杆 D型 尺寸 | () |
| JB/T 9161.7-1999 | 内圆磨床接杆 E型 尺寸 | () |
| JB/T 9161.8-1999 | 内圆磨床接杆 F型 尺寸 | () |
| JB/T 9161.9-1999 | 内圆磨床接杆 G型 尺寸 | () |
| JB/T 9904.2-1999 | 花键轴磨床 精度检验 | () |
| JB/T 9904.3-1999 | 花键轴磨床 技术条件 | () |
| JB/T 9904.4-2006 | 花键轴磨床 第4部分：参数 | () |
| JB/T 9905.2-1999 | 无心外圆磨床 技术条件 | () |
| JB/T 9905.3-2006 | 无心外圆磨床 第3部分：参数 | () |
| JB/T 9906.2-1999 | 内圆磨床 技术条件 | () |
| JB/T 9906.3-2006 | 内圆磨床 第3部分：参数 | () |
| JB/T 9907.2-2000 | 双端面磨床 制造与验收技术要求 | () |
| JB/T 9907.3-2006 | 双端面磨床 第3部分：参数 | () |
| JB/T 9908.1-1999 | 卧轴圆台平面磨床 参数 | () |
| JB/T 9908.3-1999 | 卧轴圆台平面磨床 精度检验 | () |
| JB/T 9908.4-1999 | 卧轴圆台平面磨床 技术条件 | () |
| JB/T 9909.2-1999 | 立轴圆台平面磨床 精度检验 | () |
| JB/T 9909.3-1999 | 立轴圆台平面磨床 技术条件 | () |
| JB/T 9909.4-2006 | 立轴圆台平面磨床 第4部分：参数 | () |
| JB/T 9910.1-1999 | 高精度卧轴圆台平面磨床 精度检验 | () |
| JB/T 9910.2-1999 | 高精度卧轴圆台平面磨床 技术条件 | () |
| JB/T 9912.2-1999 | 光学曲线磨床 精度检验 | () |
| JB/T 9912.3-1999 | 光学曲线磨床 技术条件 | () |
| JB/T 9912.4-2006 | 光学曲线磨床 第4部分：参数 | () |
| JB/T 9914-1999 | 高精度外圆磨床 精度检验 | () |
| JB/T 9915-1999 | 立轴双端面磨床 精度检验 | () |
| JB/T 9916-1999 | 卧轴双端面磨床 精度检验 | () |
| JB/T 9917.1-1999 | 多用磨床 精度检验 | () |
| JB/T 9917.2-1999 | 多用磨床 技术条件 | () |
| JB/T 9919-1999 | 高精度无心外圆磨床 精度检验 | () |
| JB/T 9925.1-1999 | 蜗杆磨床 精度检验 | () |
| JB/T 9925.2-1999 | 蜗杆磨床 技术条件 | () |
| JB/T 9926.1-1999 | 内螺纹磨床 精度检验 | () |
| JB/T 9926.2-1999 | 内螺纹磨床 技术条件 | () |
| JC/T 970.1-2005 | 陶瓷瓷质砖抛光技术装备 第1部分：抛光机 | () |
| JIS B6211-2006 | 水平轴内圆磨床试验条件.精度检验 横軸内面研削盤―精度検査 | Test conditions for internal cylindrical grinding machines with horizontal spindle -- Testing of the accuracy |
| JIS B6212-2006 | 机床.工作台移动式万能外圆磨床检验条件.精度检验 テーブル移動形円筒研削盤及び万能研削盤の検査条件―精度検査 | Machine tools -- Test conditions for external cylindrical and universal grinding machines with a movable table -- Testing of the accuracy |
| JIS B6213-2006 | 水平磨轮轴和往复工作台式平面磨床的试验条件.精度检验 横軸角テーブル形平面研削盤―精度検査 | Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table -- Testing of the accuracy |
| JIS B6214-1996 | 带立式磨轮轴和旋转工作台的平面磨床.精度检验 立て軸回転テーブル形平面研削盤 ― 精度検査 | Surface grinding machines with vertical grinding wheel spindle and rotary table -- Testing for the accuracy |
| JIS B6220-1999 | 外圆无心磨床.精度检验 心なし研削盤 ― 精度検査 | External cylindrical centreless grinding machines -- Testing of the accuracy |
| JIS B6251-2004 | 机床.带垂直研磨轮轴和往复式台的表面研磨机的试验条件.精确性试验 立て軸角テーブル形平面研削盤－精度検査 | Machine tools -- Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table -- Testing of the accuracy |
| JIS B6335-1986 | 数控外圆磨床和万能磨床性能和加工精度试验规程 数値制御円筒研削盤及び万能研削盤の試験及び検査方法(廃止) | Test code for performance and accuracy of numerically controlled external cylindrical and universal grinding machines |
| JIS B6543-1991 | 旋板刀磨床.试验和检验方法 ベニヤナイフ研削盤 ― 試験及び検査方法 | Veneer knife grinders -- Test and inspection methods |
| JIS B6545-1991 | 辊式抛光机.试验和检验方法 ドラムサンダ ― 試験及び検査方法 | Drum sanders -- Test and inspection methods |
| JIS B6546-1991 | 宽面砂带抛光机.试验和检验方法 ワイドベルトサンダ ― 試験及び検査方法 | Wide belt sanders -- Test and inspection methods |
| JIS B7762-4-2006 | 便携式手提动力工具.手柄振动测量.第4部分:磨床 手持ち可搬形動力工具―ハンドルにおける振動測定方法－第４部：グラインダ | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 4: Grinders |
| JIS B7762-8-2006 | 便携式手提动力工具.手柄振动测量.第8部分:抛光机和旋转式轨道和特殊轨道磨光机 手持ち可搬形動力工具―ハンドルにおける振動測定方法―第８部：ポリッシャ及びロータリ並びにオービタル及びランダムオービタルサンダ | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 8: Polishers and rotary, orbital and random orbital sanders |
| JIS C9610-1976 | 便携式电动研磨机 携帯電気グラインダ | Portable electric grinders |
| JIS C9610 AMD 1-2006 | 便携式电动研磨机(修改件1) 携帯電気グラインダ（追補１） | Portable electric grinders (Amendment 1) |
| JIS C9745-2-3-1999 | 手提式电动工具的安全.第2部分:磨床、抛光机和砂轮磨光机的特殊要求 手持ち形電動工具―安全性―第２－３部：グラインダ，ポリッシャ及びディスクサンダの個別要求事項 | Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for grinders, polishers and disk-type sanders |
| JIS K5101-1-3-2004 | 颜料试验方法.第1部分:分散特性评估的分散方法.第3节:高速叶轮研磨机 顔料試験方法－第１部：分散性評価のための分散方法－第３節：高速インペラミル | Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 3: A high-speed impeller mill |
| JIS K5101-1-4-2004 | 颜料试验方法.第1部分:分散特性评估的分散方法.第4节:钢珠研磨机 顔料試験方法－第１部：分散性評価のための分散方法－第４節：ビーズミル | Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 4: A bead mill |
| JIS K5101-1-5-2004 | 颜料试验方法.第1部分:分散特性评估的分散方法.第5节:真空自动研磨机 顔料試験方法－第１部：分散性評価のための分散方法－第５節：フーバーマラー | Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 5: A Hoover automatic muller |
| JIS K5101-1-6-2004 | 颜料试验方法.第1部分:分散特性评估的分散方法.第6节:三轴研磨机 顔料試験方法－第１部：分散性評価のための分散方法－第６節：３本ロールミル | Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 6: A triple-roll mill |
| JIS R6211-12-2003 | 粘合磨料产品.尺寸.第12部分:在卧式磨床上去毛刺和精整用砂轮 結合研削材といし ― 寸法 ― 第１２部：ストレートグラインダにおけるばり取り用研削といし | Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling on a straight grinder |
| JIS R6211-13-2003 | 粘合磨料产品.尺寸.第13部分:在立式磨床上去毛刺和精整用砂轮 結合研削材といし ― 寸法 ― 第１３部：バーチカルグラインダにおけるばり取り用研削といし | Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling on a vertical grinder |
| JIS R6211-14-2003 | 粘合磨料产品.尺寸.第14部分:在角度磨床上去毛刺和精整/打磨用砂轮 結合研削材といし ― 寸法 ― 第１４部：アングルグラインダにおけるばり取り及びきず取り用研削といし | Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder |
| JIS T5506-3-2001 | 牙科旋转仪器.切削工具.第3部分:硬质合金实验室切削工具. 研磨机 歯科用回転器具 ― カッタ ― 第３部：技工用カーバイド切削器具 ― ミリング装置用 | Dental rotary instruments -- Cutters -- Part 3: Carbide laboratory cutters -- Milling machines |
| NF E60-001-1982 | 磨床.外旋转表面.综合0.多种语言名细表.应用 | (External cylindrical grinding machines. General. Terminology. Utilisation.) |
| NF E60-002-1982 | 磨床.水平轴线砂轮轴平面.综述.多种语言名称.应用 | (Surface grinding machines with horizontal grinding wheel spindle. General. Terminology. Utilisation.) |
| NF E60-003-1982 | 磨床.无中心外旋转表面.综述.多种语言名名称.应用 | (Cylindrical external centreless grinding machines. General. Terminology. Utilisation.) |
| NF E60-121-2002 | 有水平磨砂轮轴和往复式工作台的平面磨床的试验条件.精度试验.第1部分:工作台长度最长达1600mm的机床 | (Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of accuracy - Part 1 : machines with a table length up to 1 600 mm.) |
| NF E60-123-1984 | 横轴内旋转圆磨床.验收条件.精确度检验 | (ACCEPTANCE CONDITIONS FOR INTERNAL CYLINDRICAL GRINDING MACHINES WITH HORIZONTAL SPINDLE. TESTING OF ACCURACY.) |
| NF E60-124-1984 | 带移动台外旋转圆磨床.验收条件.精确度检验 | (TEST CONDITIONS FOR EXTERNAL CYLINDRICAL GRINDING MACHINES WITH A MOVABLE TABLE. TESTING OF ACCURACY.) |
| NF E60-126-2001 | 双柱式平面磨床的试验条件.导轨磨床.精度试验 | (Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy.) |
| NF E60-127-1989 | 立式磨床.验收条件.精确度检验 | (Machine tools. Vertical grinding machines. Acceptance conditions. Testing of accuracy.) |
| NF E60-276-1990 | 机床.噪音测量的常规工作条件.带锯刀的研磨机切断机床 | (Machine-tools. Conventional working conditions for measurement of noise. Grinder-cutting-off machines with cuttersaws.) |
| NF E60-400-2002 | 机床.安全性.固定式磨床 | (Machine-tools - Safety - Stationary grinding machines.) |
| NF E62-116-1986 | 磨床.砂轮安装用法兰盘.设计规则.试验 | (GRINDING MACHINES. FLANGES FOR THE MOUNTING OF GRINDING WHEELS. DESIGN RULES. TESTING METHOD.) |
| NF E63-608-1996 | 橡胶和塑料加工机械.双辊研磨机.安全要求(欧洲标准EN 1417) | (RUBBER AND PLASTICS MACHINES. TWO ROLL MILLS. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 1417).) |
| NF E65-100-7-2002 | 手持非电动工具.安全要求.第7部分:磨床 | (Hand-held non-electric power tools - Safety requirements - Part 7 : grinders.) |
| NF E65-100-9-2001 | 手持式非电动工具.安全要求.第9部分:模研磨机 | (Hand-held non-electric power tools - Safety requirements - Part 9 : die grinders.) |
| NF E90-321-1-1995 | 手持便携式动力工具.测量手柄的颤动.第四部分:磨床 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 4 : grinders.) |
| NF G37-121-1999 | 橡胶或塑料涂层织物.耐磨强度的测定.第1部分:TABER研磨机 | (Rubber- or plastics-coated fabrics. Determination of abrasion resistance. Part 1 : Taber abrader.) |
| NF T31-210-5-1995 | 颜料和稀释剂.色散特性评定用色散方法.第5部分:色散用自动研磨机 | (PIGMENTS AND EXTENDERS. METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 5 : DISPERSION USING AN AUTOMATIC MULLER. (EUROPEAN STANDARD EN ISO 8780-5).) |
| QB/T 1448-1992 | 刀剪磨床 | () |
| UL 561-1997 | 地板抛光机 | (Floor-finishing machines ) |
| UL 745-2-3-1995 | 研磨机、抛光机和盘式砂轮机特殊要求 | (Particular requirements for grinders, polishers and disk-type sanders ) |
| UL 745-2-3-1995 | 研磨机、抛光机和盘式砂轮机特殊要求 | (Particular requirements for grinders, polishers and disk-type sanders ) |
| UL 745-4-3-1995 | 由蓄电池供电的研磨机、磨光器和盘形砂轮机特殊要求 | (Particular requirements for battery-operated grinders, polishers, and disk-type sanders ) |
| prEN 13035-10-1997 | 平板玻璃制造、处理和加工用机械和设备 安全要求 第10部分：研磨和抛光机 | Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 10: Grinding and polishing machines |
| 编号 | 中文名称 | 英文名称 |