| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI/ASTM F1677-2005 | 使用便携式可倾斜铰链支杆滑动测试仪(PIAST)的试验方法 | Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST) |
| ANSI/ASTM F1678-1997 | 便携式铰链支杆滑动测试仪(PAST)使用试验方法 | Test Method for Using a Portable Articulated Strut Slip Tester (PAST) |
| ANSI/BHMA A156.1-2006 | 合页和铰链 | Butts and Hinges |
| ANSI/BHMA A156.17-2004 | 自闭式铰链和枢轴 | Self-Closing Hinges and Pivots |
| ANSI/BHMA A156.20-2006 | 条式及T形铰链和搭钩 | Strap and Tee Hinges, and Hasps |
| ANSI/BHMA A156.26-2006 | 连续铰链 | Continuous Hinges |
| ANSI/BHMA A156.7-2002 | 样板铰链尺寸 | Template Hinge Dimensions |
| ANSI/SAE J1110-1993 | 橡胶轮胎的铰链集材拖运机的特性和定义 | Specification Definitions - Articulated, Rubber-Tired Log Skidder |
| ASTM F 1758-2005 | 安全等级双开式弹簧门用安全铰链的标准试验方法 | Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors |
| BS 2837-1988 | 包装箱提升装置用钢铰链与链带组件规范 | Specification for steel links and strap assemblies for lifting attachments for packing cases |
| BS DD 171-1987 | 铰链或枢轴安装的门的性能要求(包括试验方法)规定指南 | Guide to specifying performance requirements for hinged or pivoted doors (including test methods) |
| BS DD CEN/TS 13126-6-2004 | 建筑五金、窗户和门上窗的装置.要求和试验方法.可变几何形状的固定铰链(有或无摩擦系统) | Building hardware, fittings for windows and door height windows - Requirements and test methods - Variable geometry stay hinges (with or without a friction system) |
| BS DD CEN/TS 13126-9-2004 | 建筑五金、窗户和门上窗的配件.要求和试验方法.尖轴铰链 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Pivot hinges |
| BS EN 14512-2006 | 危险货物运输用容器.液态化学药品运输用罐设备.带绕轴旋转螺钉的铰链人孔盖和颈环 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole cover and neckrings with pivoting bolts |
| BS EN 948-1999 | 铰链门或旋转门.耐静扭力的测定 | Hinged or pivoted doors - Determination of the resistance to static torsion |
| DD 171-1987 | 铰链门和旋转门性能要求规定指南(包括试验方法) | Guide to specifying performance requirements for hinged or pivoted doors (including test methods) |
| DIN 18262-1969 | 防火门用可调节非承重弹簧铰链 | Adjustable Non-load-bearing Spring Hinge for Fire Protecting Doors |
| DIN 18272-1987 | 防火间隔.防火门的铰链.弹性铰链和支撑铰链 | Fire barrieres; hinges for fire doors; spring hinge and supporting hinge |
| DIN 27203-2-2004 | 铁路车辆的状况.乘客区.第2部分:上车门.结构类型:折叠铰链门 | State of railway vehicles - Passenger area - Part 2: Entrance doors - Type of construction: Folding hinged doors |
| DIN 27203-6-2004 | 铁路车辆的状况.乘客区.第6部分:客车之间的后门/门.结构类型:折叠门、推拉门、旋转装货门、铰链门 | State of railway vehicles - Passenger area - Part 6: End doors/doors between coaches - Type of construction: Folding doors, sliding doors, roller loading doors, hinged doors |
| DIN 28125 Bb.1-1989 | 铰链盖.提升装置结构的示例 | Hinged covers; example for construction of a lifting aid |
| DIN 4000-48-1986 | 门铰链、合页和琴式铰的产品特性图表 | Tabular layouts of article characteristics for door hinges, hinges and piano hinges |
| DIN 48066-1-1975 | 铰链.第2部分:支架铰链(架空电力线用) | Hinges; supporting hinges (for overhead power lines) |
| DIN 48066-2-1975 | 铰链.第2部分:张力铰链(架空电力线用) | Hinges; strain hinges (for overheard power lines) |
| DIN 56923-1989 | 舞台工程.舞台设备.插座铰链 | Stage engineering, stage equipment; socket hinges |
| DIN 68856-2-2004 | 家具五金件.术语和定义.第2部分:家具铰链和襟翼铰链 | Hardware for furniture - Terms and definitions - Part 2: Furniture hinges and flap hinges |
| DIN 68857-2004 | 家具五金件.杯形铰链及其安装底板.要求和检验 | Hardware for furniture - Cup hinges and their mounting plates - Requirements and testing |
| DIN 71805-1990 | 角形铰链.球形承窝.开口弹簧卡环 | Angle joints; housings, circlips |
| DIN 7956-1983 | 五金件.轧制长条铰链 | Hardware; continuos hinge rolled |
| DIN 81301-2003 | 船舶用铰链门带碰簧销的插锁 | Mortise-locks with latch-bolt for hinged doors on ships |
| DIN 81302-2003 | 传播用铰链门无碰簧销的插锁 | Mortise-locks without latch-bolt for hinged doors on ships |
| DIN 81303-2003 | 船舶用厕所和浴室的铰链门插锁 | Mortise-locks for hinged doors of lavatory and bath on ships |
| DIN 81306-2003 | 船舶用铰链门无销插锁 | Mortise-locks without bolt for hinged doors on ships |
| DIN 81311-2005 | 船用重型铰链门的带碰簧销的弹簧锁 | Rim-locks with latch-bolt for heavy hinged doors on ships |
| DIN 81312-1987 | 重型铰链门用无簧锁的门缘弹簧锁 | Rim-locks without latch-bolt for heavy hinged doors |
| DIN 81320-1977 | 通道上铰链门用搭扣 | Turnbuckles for flaps in passageways |
| DIN 81401-1978 | 船舱门用的可拆开的连接铰链和折页.用于螺接 | Loose joints butts and hinges for ship's cabin doors; for screwing-on |
| DIN 81402-1978 | 螺钉安装的船舱门用铰链 | Hinges for ship's cabinet doors, for screwing-on |
| DIN 81403-1978 | 舰船用带形铰链 | Strap hinges for ships and boats |
| DIN 83100-1-2002 | 船舶用重型铰链门.第1部分:防风雨(ISO型)、分类和交货技术条件 | Heavy hinged doors on ships - Part 1: Weathertight (ISO-type), classification, technical delivery conditions |
| DIN 83100-11-2002 | 船舶用重型铰链门.第11部分:无防风雨的、分类和交货技术条件 | Heavy hinged doors on ships - Part 11: Non-weathertight, classification, technical delivery conditions |
| DIN 83100-12-2002 | 船用重型铰链门.第12部分:不防风雨门.详细设计要求 | Heavy hinged doors on ships - Part 12: Non weathertight, design details |
| DIN 83100-13-2002 | 船舶用重型铰链门.第13部分:不防风雨的安装 | Heavy hinged doors on ships - Part 13: Non weathertight, installation |
| DIN 83100-2-2002 | 船舶用重型铰链门.第2部分:防风雨(ISO型)的设计细则 | Heavy hinged doors on ships - Part 2: Weathertight (ISO-type), design details |
| DIN 83100-3-2002 | 船用重型铰链门.第3部分:防风雨(ISO型)门.安装 | Heavy hinged doors on ships - Part 3: Weathertight (ISO-type), installation |
| DIN 83104-1985 | 船用重型铰链门和舱口用卡栓 | Dogs for heavy hinged doors on ships and for hatches |
| DIN 83105-2002 | 船舶用重型铰链门的铰链 | Hinges for heavy hinged doors on ships |
| DIN 83106-1984 | 船上重型铰链门和舱口用的密封垫片 | Gaskets for heavy hinged doors on ships and for hatches |
| DIN 83222-2006 | 工作面地板、中间底部和通道用带铰链的盖板 | Hinged flap for working floors, intermediate bottoms and walkways |
| DIN 83406-1-2001 | 船舶设备用铰链.第1部分:短铰链 | Hinges for ships equipment - Part 1: Short type |
| DIN 83406-2-2001 | 船舶设备用铰链.第2部分:长铰链 | Hinges for ships equipment - Part 2: Long type |
| DIN 85005-17-2001 | 船舶和船舶技术.技术文献图形符号.第17部分:门、铰链、操作室、窗、楼梯和电梯 | Ships and marine technology - Graphical symbols for technical documentation - Part 17: Doors, hatches, openings, windows, stairs, elevators |
| DIN CEN/TS 13126-6-2004 | 窗和落地窗用建筑五金和配件.要求和试验方法.第6部分:(有或无摩擦系统的)可变几何形状固定铰链 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction system); German version CEN/TS 13126-6:2004 |
| DIN CEN/TS 13126-9-2004 | 窗和门高窗户的建筑物五金和配件.要求和试验方法.第9部分:尖轴铰链 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9: Pivot hinges; German version CEN/TS 13126-9:2004 |
| DIN EN 10223-5-1998 | 栅栏用钢丝和钢丝制品.第5部分:钢丝编制铰链网格和结节网格栅栏 | Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing; German version EN 10223-5:1998 |
| DIN EN 1119-1996 | 塑料管道系统.玻璃纤维增强热固性塑料(GFK)管和配件.密封性和耐柔性连接和铰链连接磨损能力试验方法 | Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996 |
| DIN EN 12982-2000 | 工业阀门.铰链焊接端阀门端对端和中心对末端尺寸 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves; German version EN 12982:2000 |
| DIN EN 131-4-2007 | 梯子.第4部分:单或多铰链接合梯 | Ladders - Part 4: Single or multiple hinge-joint ladders; German version EN 131-4:2007 |
| DIN EN 14512-2006 | 危险货物运输用容器.液体化学物品运输的容器设备.绕轴旋转螺钉的铰链人孔盖和颈环 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts; English version of DIN EN 14512:2006-10 |
| DIN EN 1935-2002 | 建筑五金件.单轴铰链.要求和试验方法 | Building hardware - Single-axis hinges - Requirements and test methods; German version EN 1935:2002 |
| DIN EN 353-1-2002 | 防止人员从高处跌落的保护设备.第1部分:设有刚性铰链的导向跌落保护装置; 德文版本 EN 353-1:2002 | Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line; German version EN 353-1:2002 |
| DIN EN 353-2-2002 | 防止人员从高处跌落的保护设备.第2部分:设有柔性铰链的导向跌落保护装置; 德文版本 EN 353-2:2002 | Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line; German version EN 353-2:2002 |
| EN 1677-4-2000 | 吊重装置组件 安全 第4部分：铰链 8级 | Components for slings - Safety - Part 4: Links, Grade 8 |
| EN 1677-6-2001 | 吊重装置组件 安全 第6部分：铰链 4级 | Components for slings - Safety - Part 6: Links; Grade 4 |
| EN 1935-2002 | 建筑五金器具 单轴铰链 要求和试验方法 | Building hardware - Single-axis hinges - Requirements and test methods |
| EN 947-1998 | 铰链门或枢轴门 抗垂直负载的测定 | Hinged or pivoted doors - Determination of the resistance to vertical load |
| EN 948-1999 | 铰链门或枢轴门 耐静力扭转的测定 | Hinged or pivoted doors - Determination of the resistance to static torsion |
| EN ISO 9173-1-1995 | 拔牙钳 第1部分：螺钉和铰链接合型 | Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991) |
| ISO 4141-4-2001 | 道路车辆 多芯连接电缆 第4部分：铰链试验方法和对装芯电缆组件的要求 | Road vehicles - Multi-core connecting cables - Part 4: Articulation test methods and requirements for coiled cable assemblies |
| JB/T 8010.14-1999 | 机床夹具零件及部件 铰链压板 | () |
| JB/T 8033-1999 | 机床夹具零件及部件 铰链轴 | () |
| JB/T 8034-1999 | 机床夹具零件及部件 铰链支座 | () |
| JB/T 8035-1999 | 机床夹具零件及部件 铰链叉座 | () |
| JB/T 9162.23-1999 | 铰链 尺寸 | () |
| JIS A1510-3-2001 | 建筑物门配件的试验方法.第3部分:暗装的关门装置、关门装置和铰链关门装置 建築用ドア金物の試験方法 ― 第３部：フロアヒンジ，ドアクローザ及びヒンジクローザ | Test method for door fittings of buildings -- Part 3: Floor concealed door closers, door closers and hinge closers |
| JIS A8346-2004 | 运土机械.铰链式车架锁.性能要求 土工機械－車体屈折フレームの固定装置－性能要求事項 | Earth-moving machinery -- Articulated frame lock -- Performance requirements |
| JIS T9220-1992 | 外锁紧肘铰链式关节 能動ひじ（肘）ヒンジ継手 | Outside locking elbow hinge units |
| NF E28-201-1967 | 润滑装置.铰链盖滑脂塞 | (FLIP TOP LUBRICATOR.) |
| NF F01-031-1976 | 铁路车辆.大型铰链 | (RAILWAY TRANSPORT EQUIPMENT. HEAVY-DUTY HINGES.) |
| NF F01-032-1976 | 铁路车辆.中型和大型铰链. 轴 | (RAILWAY TRANSPORT EQUIPMENT. MEDIUM AND HEAVY-DUTY HINGES. PINS.) |
| NF F31-031-1990 | 铁路车辆.内铰链式门插锁.互换性规格和功能规格 | (RAILWAY ROLLING STOCK. MORTISE LOCKS FOR INNER HINGED DOORS. INTERCHANGEABILITY SPECIFICATIONS AND FUNCTIONNAL SPECIFICATIONS.) |
| NF F31-032-1990 | 铁路车辆.内铰链式门板把锁.互换性规格和功能规格 | (RAILWAY ROLLING STOCK. BRACKET LOCKS FOR INNER HINGED DOORS. INTERCHANGEABILITY SPECIFICATIONS AND FUNCTIONNAL SPECIFICAITONS.) |
| NF L81-313-1978 | 机上提升球头铰链和系环的固定.ＩＳＯ米制螺纹剖面和BNAE公差 | (AIRCRAFT RECEPTACLES FOR JACKING PADS AND MOORING RINGS. METRIC ISO THREAD PROFILE AND BNAE TOLERANCES. (RECH.).) |
| NF L81-323-1978 | 机上提升球头铰链和系环的固定.ＩＳＯ米制螺纹剖面和公差 | (AIRCRAFT RECEPTACLES FOR JACKING PADS AND MOORING RINGS.METRIC ISO THREAD PROFILE AND TOLERANCES.) |
| NF L92-313-1978 | 由千斤顶提升飞机用的活动球头铰链.ＩＳＯ米制螺纹剖面和BNAE公差 | (REMOVABLE AIRCRAFT JACKING PADS WITH METRIC ISO THREAD PROFILE AND BNAE TOLERANCES. (RECH.).) |
| NF P20-517-2000 | 铰链门或支枢式门.门扇静态扭转的测定 | (Hinged or pivoted doors - Determination of the resistance to static torsion.) |
| NF P26-331-1999 | 建筑五金.电磁铰链.要求和试验方法 | (BUILDING HARDWARE. ELECTROMAGNETIC HINGES. REQUIREMENTS AND TEST METHODS.) |
| NF S91-129-1996 | 拔牙钳.第1部分:螺钉和铰链接合型 | (Dental extraction forceps. Part 1 : screw and pin joint types.) |
| NF T57-215-1996 | 塑料管道系统.玻璃增强热固性塑料管和配件接头.挠性和铰链接头耐泄漏和损伤试验方法 | (Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.) |
| QB/T 1235-1991 | 塑料门窗合叶(铰链) | () |
| QB/T 1242-1991 | 家具五金杯状暗铰链安装尺寸 | () |
| QB/T 1496-1992 | 事物特性表铰链与门窗合页 | () |
| QB/T 1738-1993 | 弹簧合页(铰链) | () |
| QB/T 2189-1995 | 家具五金杯状暗铰链及其安装座要求和检验 | () |
| prEN 1636-2-1996 | 无压力排水道和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第2部分：带有挠 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
| 编号 | 中文名称 | 英文名称 |