| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI B74.16-2002
| 金刚石磨粒粒径的检验
| Checking the Size of Diamond Abrasive Grain
|
| ANSI B74.20-2004
| 亚筛粒度中金刚石粉末的分级
| Grading of Diamond Powder in Sub-Sieve Sizes
|
| ANSI B74.3-2003
| 金刚石或CBN磨料制品形状和尺寸的规范
| Specifications for Shapes and Sizes of Diamond or CBN Abrasive Products
|
| ANSI/UL 745-2-31-2006
| 金刚石芯钻头的安全标准.特殊要求
| Standard for Safety for Particular Requirements for Diamond Core Drills
|
| ASTM G 171-2003
| 用金刚石触针测定材料划痕硬度的标准试验方法
| Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
|
| BS 4019-5-1999
| 旋转钻芯设备.旋转钻心设备.钢绳金刚石钻孔设备规范.A系统:米制单位
| Rotary core drilling equipment - Rotary core drilling equipment - Specification for wireline diamond drilling equipment - System A. Metric units
|
| BS EN ISO 6360-4-2004
| 牙科学.旋转仪器的数字编码系统.金刚石仪器的具体特性
| Dentistry - Number coding system for rotary instruments - Specific characteristics of diamond instruments
|
| BS EN ISO 7711-2-1993
| 牙科用旋转器械.金刚石器械.第2部分:切盘
| Dental rotary instruments - Diamond instruments - Discs
|
| BS EN ISO 7711-3-2005
| 牙科学.金刚石旋转器械.磨粒尺寸、标注与彩色编码
| Dentistry - Diamond rotary instruments - Grit sizes, designation and colour code
|
| BS ISO 16463-2004
| 多晶金刚石镶刃插件.尺寸、类型
| Polycrystalline diamond inserts, tipped - Dimensions, types
|
| BS ISO 22917-2005
| 超磨料.金刚石或立方氮化硼砂轮的极限偏差和跳动误差
| Superabrasives - Limit deviations and run out tolerances for grinding wheels with diamond or cubic boron nitride
|
| BS ISO 6104-2005
| 高强度磨料制品.金刚石或立方氮化硼旋转磨削工具.一般评述、名称和多种语言术语
| Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature
|
| DD 234-1996
| 抛光金刚石的分级.术语和分类
| Grading polished diamonds. Terminology and classification
|
| DIN 4000-134-2005
| 性能表.第134部分:含金刚石和氮化硼的不可旋转制品
| Tabular layouts of properties - Part 134: Non rotating products with diamond or boron nitride
|
| DIN 58723-1985
| 光学加工.平圆面用嵌制金刚石钻头的磨具
| Production in optic of engineering; diamond impregnated tools for facetts
|
| DIN 58741 Bb.1-2006
| 光学工程生产.镶金刚石的碗形砂轮.综述
| Production in optical engineering - Diamond impregnated cup wheels - Survey
|
| DIN 58741-1-1996
| 光学加工.镶金刚石的碗形砂轮.第1部分:带圆锥体
| Production in optical engineering - Diamond impregnated cup wheels - Part 1: with steep cone
|
| DIN 58741-2-2004
| 光学加工.镶金刚石的杯形砂轮.第2部分:带安装缸砂轮
| Production in optical engineering - Diamond impregnated cup wheels - Part 2: With mounting cylinder
|
| DIN 58741-4-2004
| 光学加工.镶金刚石的杯形砂轮.第4部分:组合工具
| Production in optical engineering - Diamond impregnated cup wheels - Part 4: Combinated tools
|
| DIN 58741-5-2004
| 光学加工.镶金刚石的杯形砂轮.第5部分:电镀的
| Production in optical engineering - Diamond impregnated cup wheels - Part 5: Electroplated
|
| DIN 58741-6-2007
| 光学加工.镶金刚石的杯形砂轮.第6部分:整套砂轮磨削工具
| Production in optical engineering - Diamond impregnated cup wheels - Part 6: Set-wheels grinding tools
|
| DIN 58741-7-2005
| 光学加工.镶金刚石的杯形砂轮.第7部分:可组合的定形研磨盘
| Production in optical engineering - Diamond impregnated cup wheels - Part 7: Combinable shape grinding discs
|
| DIN 58741-8-2005
| 光学加工.镶金刚石的杯形砂轮.第8部分:中空锥柄连接
| Production in optical engineering - Diamond impregnated cup wheels - Part 8: With hollow taper shank connection
|
| DIN 58743-2005
| 光学加工.镶金刚石的切割锯片
| Production in optical engineering - Diamond impregnated discs
|
| DIN 58744-1-2002
| 光学工程生产.镶金刚石的磁芯钻.第1部分:带装配螺纹
| Production in optical engineering - Diamond impregnated core drills - Part 1: With fitting thread
|
| DIN 58744-2-1998
| 光学工程生产.镶金刚石的空心钻.第2部分:带装配圆筒
| Production in optical engineering - Diamond impregnated core drills - Part 2: With fitting cylinder
|
| DIN 58745-1977
| 光学加工.镶金刚石的片状器材
| Production in optical engineering; diamond impregnated pellets
|
| DIN 69110-2005
| 光学加工.光学工具用金刚石镶嵌.超磨蚀部分的元件
| Production in optical engineering - Diamond impregnation for tools used in optics - Details about the superabrasive section
|
| DIN EN ISO 6360-4-2004
| 牙科学.旋转器械的数字编码体系.第4部分:金刚石器械的特性
| Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments (ISO 6360-4:2004); German version EN ISO 6360-4:2004
|
| DIN ISO 16463-2005
| 镶片多晶体金刚石镶齿.尺寸、类型
| Polycrystalline diamond inserts, tipped - Dimensions, types (ISO 16463:2004)
|
| DIN ISO 22917-2005
| 超磨料.金刚石或立方体氮化硼砂轮的极限偏差和跳动误差
| Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride (ISO 22917:2004)
|
| DIN ISO 6104-2005
| 超磨料制品.带金刚石或立方氮化硼的旋转磨削工具.一般评述、名称与符号和多种语言术语
| Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature (ISO 6104:2005)
|
| DIN-Fachbericht ISO/TR 24857-2007
| 人造工业金刚石砂粒产品.单一颗粒抗压故障强度."DiaTest-SI"系统
| Synthetic industrial diamond grit products - Single-particle compressive failure strength - "DiaTest-SI" system
|
| GB 13960.7-1997
| 可移式电动工具的安全第二部分:带水源金刚石钻的专用要求
| Safety of transportable motor-operated electric tools--Part 2:Particular requirements for diamond drills with water supply
|
| GB 13960.8-1997
| 可移式电动工具的安全第二部分:带水源金刚石锯的专用要求
| Safety of transportable motor-operated electric tools--Part 2:Particular requirements for diamond saws with water supply
|
| GB/T 11270.1-2002
| 超硬磨料制品金刚石圆锯片第1部分:焊接锯片
| Abrasive products--Diamond circular saw blade--Part 1:Welded saw blades
|
| GB/T 11270.2-2002
| 超硬磨料制品金刚石圆锯片第2部分:烧结锯片
| Abrasive products--Diamond circular saw blade--Part 2:Sintered saw blades
|
| GB/T 14898-2004
| 人造金刚石用石墨
| Graphite for making synthetic diamond
|
| GB/T 16950-1997
| 金刚石岩心钻探钻具设备
| Diamond core drilling equipment conventional system
|
| GB/T 16951-1997
| 金刚石绳索取心钻探钻具设备
| Diamond core drilling equipment--Wire line system
|
| GB/T 21952-2008
| 镶聚晶金刚石刀片 尺寸
| Polycrystalline diamond inserts,tipped - Dimensions |
| GB/T 6405-1994
| 人造金刚石和立方氮化硼品种
| Types of synthetic diamond and cubic boron nitride
|
| GB/T 6406-1996
| 超硬磨料金刚石或立方氮化硼颗粒尺寸
| Super abrasive--Grain sizes of diamond or cubic boron nitride
|
| GB/T 6409.2-1996
| 超硬磨料制品金刚石或立方氮化硼磨具形状和尺寸
| Abrasive products--Diamond or cubic boron nitride grinding tools--Form and dimensions
|
| IEC 61029-2-6-1993
| 移动式电动工具的安全 第2-6部分:注水金刚石钻的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply
|
| IEC 61029-2-7-1993
| 移动式电动工具的安全 第2-7部分:注水金刚石锯的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply
|
| ISO 10097-1-1999
| 金刚石绳索取心钻探设备 系列A 第1部分:米制单位
| Wireline diamond core drilling equipment - System A - Part 1: Metric units
|
| ISO 10097-2-1999
| 金刚石绳索取心钻探设备 系列A 第2部分:英制单位
| Wireline diamond core drilling equipment - System A - Part 2: Inch units
|
| ISO 10098-1992
| 金刚石绳索取心钻探设备 CSSK体系
| Wireline diamond core drilling equipment; system CSSK
|
| ISO 16463-2004
| 镶片多晶体金刚石镶齿.尺寸、类型
| Polycristalline diamond inserts, tipped - Dimensions, types
|
| ISO 22917-2004
| 超磨料.金刚石或立方体氮化硼砂轮的极限偏差和跳动误差
| Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
|
| ISO 3396-1975
| 旋转钻井设备.金刚石钻头和岩心金刚石钻头
| Rotary drilling equipment; Diamond drilling bits and diamond core bits
|
| ISO 3551-1-1992
| 回转取心金刚石钻探设备 系列A 第1部分:米制单位
| Rotary core diamond drilling equipment; system A; part 1: metric units
|
| ISO 3551-2-1992
| 回转取心金刚石钻探设备 系列A 第2部分:英制单位
| Rotary core diamond drilling equipment; system A; part 2: inch units
|
| ISO 3552-1-1992
| 回转取心金刚石钻探设备 系列B 第1部分:米制单位
| Rotary core diamond drilling equipment; system B; part 1: metric units
|
| ISO 3552-2-1992
| 回转取心金刚石钻探设备 系列B 第2部分:英制单位
| Rotary core diamond drilling equipment; system B; part 2: inch units
|
| ISO 6104-2005
| 超磨料制品.带金刚石或立方氮化硼的旋转磨削工具.一般评述、名称与符号和多种语言术语
| Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature
|
| ISO 6360-4-2004
| 牙科学.旋转器械的数字编码体系.第4部分:金刚石器械的具体特性
| Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments
|
| ISO 8866 Technical Corrigendum 1-1991
| 回转取心金刚石钻探设备 系列C 技术勘误1
| Rotary core diamond drilling equipment; system C; technical corrigendum 1
|
| ISO 8866 Technical Corrigendum 2-1992
| 回转取心金刚石钻探设备 系列C 技术勘误2
| Rotary core diamond drilling equipment; system C; technical corrigendum 2
|
| ISO 8866-1991
| 回转取心金刚石钻探设备 系列C
| Rotary core diamond drilling equipment; system C
|
| ISO/TR 24857-2006
| 人造工业金刚石砂粒产品.单一颗粒抗压故障强度."DiaTest-SI"系统
| Synthetic industrial diamond grit products - Single-particle compressive failure strength - "DiaTest-SI" system
|
| JB/T 10040-2001
| 金刚石修整滚轮
| ()
|
| JB/T 10041-2008
| 超硬材料 金刚石或立方氮化硼/硬质合金复合片品种、尺寸
| ()
|
| JB/T 10646-2006
| 超硬磨料 金刚石热冲击韧性测定方法
| Super abrasive - Determination of thermal impact toughness of diamond
|
| JB/T 10719-2007
| 焊接聚晶金刚石或立方氮化硼槽刀
| ()
|
| JB/T 10720-2007
| 焊接聚晶金刚石或立方氮化硼车刀
| ()
|
| JB/T 10721-2007
| 焊接聚晶金刚石或立方氮化硼铰刀
| ()
|
| JB/T 10722-2007
| 焊接聚晶金刚石或立方氮化硼立铣刀
| ()
|
| JB/T 10723-2007
| 焊接聚晶金刚石或立方氮化硼镗刀
| ()
|
| JB/T 10724-2007
| 金刚石或立方氮化硼珩磨条 技术要求
| ()
|
| JB/T 10725-2007
| 天然金刚石车刀
| ()
|
| JB/T 3233-1999
| 钻探用人造金刚石烧结体
| ()
|
| JB/T 3234-1999
| 拉丝模用人造金刚石烧结体
| ()
|
| JB/T 3235-1999
| 人造金刚石烧结体磨耗比测定方法
| ()
|
| JB/T 3236-2007
| 金刚石修整笔
| Diamond truing pen
|
| JB/T 3296-1992
| 金刚石磨边砂轮
| ()
|
| JB/T 3583-2006
| 超硬磨料制品 金刚石精磨片
| Superabrasive products-Diamond finshing pellets
|
| JB/T 3943.2-1999
| 金刚石拉丝模
| ()
|
| JB/T 5205-2007
| 石材加工用金刚石磨具
| Diamond abrasive products for stone processing
|
| JB/T 5823-1991
| 聚晶金刚石拉丝模具 技术条件
| ()
|
| JB/T 6084-2007
| 钻探工具用三角形金刚石聚晶
| Triangle polycrystalline diamond for drilling tools
|
| JB/T 6571-1993
| 人造金刚石或立方氮化硼冲击韧性测定方法
| ()
|
| JB/T 6998-1993
| 25MN金刚石液压机
| ()
|
| JB/T 7989-1997
| 超硬磨料人造金刚石技术条件
| ()
|
| JB/T 7990-1998
| 超硬磨料 人造金刚石微粉和立方氮化硼微粉
| ()
|
| JB/T 8000-1999
| 金刚石框架锯条
| ()
|
| JB/T 8002-1999
| 超硬磨料制品 人造金刚石或立方氮化硼研磨膏
| ()
|
| JB/T 8374-1996
| 金刚石选型机
| ()
|
| JB/T 8394-1996
| 粉末冶金天然金刚石修整片
| ()
|
| JB/T 9880-1999
| 金刚石修整滚轮 安装轴径
| ()
|
| JB/T 9991-1999
| 电镀金刚石铰刀
| ()
|
| JC/T 220-1979（1996）
| 天然金刚石
| ()
|
| JC/T 340-1992(1996)
| 加工非金属硬脆材料用节块式金刚石圆锯片
| ()
|
| JC/T 470-1992(1996)
| 加工非金属硬脆材料用节块式金刚石框架锯条
| ()
|
| JIS B4130-1998
| 金刚石/立方晶体氮化硼产品.金刚石或立方晶体氮化硼的粒度
| Diamond/CBN products -- Grain sizes of diamond or cubic boron nitride
|
| JIS B4131-1998
| 金刚石/立方晶体氮化硼产品.金刚石或立方晶体氮化硼砂轮
| Diamond/CBN products -- Diamond or CBN grinding wheels
|
| JIS B4134-1994
| 单刃金刚石砂轮修整工具
| Single point diamond dressing tools
|
| JIS B4138-1998
| 金刚石/立方晶体氮化硼产品.金刚石或立方晶体氮化硼分割锯
| Diamond/CBN products -- Diamond or CBN segmented saws
|
| JIS B4140-2006
| 金刚石/CBN产品.金刚石或CBN电镀工具
| Diamond/CBN products -- Diamond or CBN electroplated tools
|
| JIS B4141-1998
| 金刚石/立方晶体氮化硼产品.金刚石或立方晶粒氮化硼砂轮和锯.形状的尺寸特性和代码
| Diamond/CBN products -- Diamond or CBN grinding wheels and saws -- Dimensional characteristics and code for the forms
|
| JIS B4142-2002
| 金刚石/CBN制品.安全性要求
| Diamond/CBN products -- Safety requirements
|
| JIS C9029-2-6-2006
| 移动式电动工具的安全.第2-6部分:带供水的金刚石钻的特殊要求
| Safety of transportable motor-operated electric tools -- Part 2-6: Particular requirements for diamond drills with water supply
|
| JIS C9029-2-7-2006
| 移动式电动工具的安全.第2-7部分:带供水的金刚石锯的特殊要求
| Safety of transportable motor-operated electric tools -- Part 2-7: Particular requirements for diamond saws with water supply
|
| JIS T5505-1-2001
| 牙科旋转仪器.金刚石仪器.第1部分:尖端.尺寸、要求、标记和包装
| Dental rotary instruments -- Diamond instruments -- Part 1: Points -- Dimensions, requirements, marking and packaging
|
| JIS T5505-2-2001
| 牙科旋转仪器.金刚石仪器.第2部分:圆盘
| Dental rotary instruments -- Diamond instruments -- Part 2: Discs
|
| JIS T5505-3-2001
| 牙科旋转仪器.金刚石仪器.第3部分:磨料粒度、牌号和色码
| Dental rotary instruments -- Diamond instruments -- Part 3: Grit sizes, designation and colour code
|
| MT/T 785-1998
| 金刚石复合片取心钻头
| ()
|
| MT/T 786-1998
| 金刚石复合片不取心钻头
| ()
|
| MT/T 789-1998
| 煤田钻探金刚石取心钻头
| ()
|
| MT/T 984-2006
| 煤矿用金刚石复合片锚杆钻头
| ()
|
| NF E75-301-1978
| 金刚石或氮化硼砂轮.扁砂轮.１Ａ１型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL,FORM 1A1)
|
| NF E75-302-1978
| 金刚石或氮化硼砂轮.带加固套筒的扁砂轮１４Ａ１型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL REINFOR-CED,FORM 14A1.)
|
| NF E75-303-1978
| 金刚石或氮化硼砂轮.扁砂轮，１Ｌ１型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL,FORM 1L1)
|
| NF E75-304-1978
| 金刚石或氮化硼砂轮.扁砂轮.１Ｅ６Ｑ和１Ｅ６Ｑ型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEELS,FORMS 1E6Q AND 14E6Q.)
|
| NF E75-305-1978
| 金刚石或氮化硼砂轮.带加固套筒的扁砂轮.１４ＥＥ１型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL RENFORC-ED,FORM 14EE1.)
|
| NF E75-306-1978
| 金刚石或氮化硼砂轮.１ＦＦ１型扁砂轮
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL,FORM 1FF1.)
|
| NF E75-307-1978
| 金刚石或氮化硼砂轮.直式碗型砂轮，６ＡＺ型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDIND WHEEL. STRAIGHT CUP WHEEL, FORM 6A2.)
|
| NF E75-308-1978
| 金刚石或氮化硼砂轮.１１Ａ２型锥式碗型砂轮
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. TAPERED CUP WHEEL, FORM 11A2.)
|
| NF E75-309-1978
| 金刚石或氮化硼砂轮.１２Ａ２型２０°碟形砂轮
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. 20 DEGREES DISHED WHEEL,FORM 12A2.)
|
| NF E75-310-1978
| 金刚石或氮化硼砂轮.１２Ａ２型４５°碟形砂轮
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. 45 DEGREES DISHED WHEEL,FORM 12A2.)
|
| NF E75-311-1978
| 金刚石或氮化硼砂轮.９Ａ３型双凹口扁砂轮
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL WITH TWO BEVEL SHOULDERS,FORM 9A3.)
|
| NF E75-312-1978
| 金刚石或氮化硼砂轮.６Ａ９型碗型砂轮
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. STRAIGHT CUP WHEEL, FORM 6A9.)
|
| NF E75-313-1978
| 金刚石或氮化石砂轮.１１Ｖ９型锥式碗形砂轮
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. TAPERED CUP WHEEL, FORM 11V9.)
|
| NF E75-314-1978
| 金刚石或氮化硼砂轮.１２Ｖ９型锥式碗形砂轮
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. TAPERED CUP WHEEL, FORM 12V9.)
|
| NF E75-315-1978
| 金刚石或氮化硼砂轮.１ＥＥ１Ｖ型扁砂轮
| (DIAMOND OR CUBIC BORON NITRIDE GRINDIND WHEEL. PLAIN WHEEL,FORM 1EE1V.)
|
| NF E75-316-1978
| 金刚石或氮化硼砂轮.１Ｖ９型扁砂轮
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. ALAIN WHEEL,FORM 1V9)
|
| NF S10-023-2000
| 未加工的光学玻璃.金刚石薄片的可磨性.试验方法和分类
| (Raw optical glass - Grindability with diamond pellets - Test method and classification.)
|
| QB/T 2097.1-1995
| 金刚石玻璃刀
| ()
|
| QB/T 2097.2-1995
| 金刚石玻璃管割刀
| ()
|
| QB/T 2097.3-1995
| 金刚石圆镜机
| ()
|
| UL 745-2-31-1995
| 金刚石岩芯钻特殊要求
| (Particular requirements for diamond core drills )
|
| prEN 12866-1997
| 天然石料开采和加工机械和设备 金刚石线锯安全要求
| Machines and plants for mining and tooling of natural stone - Safety requirements for diamond wire saws
|
| prEN 61029-2-6-1992
| 移动式电动工具的安全 第２－６部分：注水金刚石钻的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply
|
| prEN 61029-2-7-1992
| 移动式电动工具的安全 第２－７部分：注水金刚石锯的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply
|
| 编号 | 中文名称 | 英文名称 |
|---|