| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI B11.5-1988
| 机床.钢铁制品.制造、维护和使用的安全要求
| Machine Tools - Ironworkers - Safety Requirements for Construction, Care and Use
|
| ANSI LC-1-2005
| 使用波纹不锈钢管(CSST)的燃气管道系统
| Fuel Gas Piping System Using Corrugated Stainless Steel Tubing (CSST) (same as CSA 6.26)
|
| ANSI/AGA LC-1-1991
| 使用波纹不锈钢管的室内燃气管线系统
| Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
|
| ANSI/AGA LC-1a-1993
| 使用波纹不锈钢管的室内燃气管线系统
| Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
|
| ANSI/AGA LC-1b-1994
| 使用波纹不锈钢管的室内燃气管线系统
| Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
|
| ANSI/ASME A112.19.3M-1987
| 不锈钢卫生设备(家庭专用型)
| Stainless Steel Plumbing Fixtures (Designed for Residential Use)
|
| ANSI/ASME B36.19M-2004
| 不锈钢管
| Stainless Steel Pipe
|
| ANSI/ASTM A193/A 193M-2001
| 高温设备用合金钢和不锈钢螺栓材料规范
| Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
|
| ANSI/ASTM A312/A 312M-2001
| 无缝和焊接奥氏体不锈钢管规范
| Specification for Seamless and Welded Austenitic Stainless Steel Pipes
|
| ANSI/ASTM A480/A 480M-2001
| 平轧不锈钢及耐热钢板、薄板及带材一般要求规范
| Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
| ANSI/ASTM A688/A 688M-2001
| 奥氏体不锈钢焊接给水加热器管规范
| Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
|
| ANSI/ASTM A789/A 789M-2001
| 普通设备用无缝与焊接铁素体/奥氏体不锈钢管规范
| Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
|
| ANSI/ASTM A814/A 814M-2001
| 冷加工焊接奥氏体不锈钢管规范
| Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
|
| ANSI/ASTM A815/A 815M-2001
| 锻制铁素体、铁素体/奥氏体和马氏体不锈钢管配件规范
| Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
|
| ANSI/ASTM A908-1996
| 不锈钢针管规范
| Specification for Stainless Steel Needle Tubing
|
| ANSI/ASTM F2098-2004
| 保证SDR9交联聚乙烯(PEX)管用金属插件安全的不锈钢夹子的试验方法
| Test Method for Stainless Steel Clamps for Securing SDR9 Cross-Linked Polyethylene (PEX) Tubing to Metal Insert Fittings
|
| ANSI/AWS A4.2M/A 4.2-1997
| 奥氏体和双奥氏体-铁素体不锈钢焊接金属中δ铁酸盐含量测试磁仪器的校准程序
| Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Austenitic-Ferrite Stainless Steel Weld Metal, Procedures for
|
| ANSI/AWS A5.22-2005
| 助溶剂芯弧焊用不锈钢焊条和钨电极惰性气体保护焊用不锈钢助溶剂芯焊条规范
| Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding
|
| ANSI/AWS B2.1-1/8-006-2002
| 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的气体保护金属极电弧焊
| Gas Metal Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-18, or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-1/8-010-2002
| 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的钨电极惰性气体保护焊
| Gas Tungsten Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-1/8-014-2002
| 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的保护金
| Standard Welding Procedure Specification - Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-1/8-228-2002
| 碳钢与奥氏体不锈钢屏蔽金属电弧焊(从M-1/P-1/S-1,组1或组2焊接到M-8/P-8/S-8, 组1)1/8到1-1/2英寸厚,ER309
| Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309-15, 16 or, 17, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-1/8-229-2002
| 碳钢与奥氏体不锈钢气体钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M- 8/P-8/S-8, 组1)1/8到1-1/2英寸厚ER30
| Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-1/8-230-2002
| 气体保护钨极弧焊的标准焊接程序规范(WPS),可熔嵌入根部的,碳钢与奥氏体不锈钢(M-1/P-1/S-1, 组 1 和 2 焊
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and ER309, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-1/8-231-2002
| 带可熔嵌入焊条的碳钢与奥氏体不锈钢气体保护钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M- 8/P-8/S-8, 组1)
| Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, 16, or, 17, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-8-005-2002
| 在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8或P-8)的气体保护金属极电弧焊
| Gas Metal Arc Welding of Austentic Stainless Steel (M-8 or P-8) 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-8-009-2002
| 在焊接条件下、有或没有垫板、10到18规格的不锈钢(M-8或P-8)的钨电极惰性气体保护焊
| Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-8-013-2002
| 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8/P-8)的保护金属电弧焊
| Standard Welding Procedure Specification - Shielded Metal Arc Welding of Austenitic - Stainless Steel (M-8/P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-8-023-2005
| 在焊接条件下1/8到1-1/2英尺厚奥氏体不锈钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-8/P-8/S-8,1组)
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
|
| ANSI/AWS B2.1-8-024-2001
| 在焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保护焊的焊接程序规范
| (WP Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As-Welded Condition
|
| ANSI/AWS B2.1-8-025-2001
| 在焊接条件下、保护金属电弧焊之后的1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保
| Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, As-Welded Condition
|
| ANSI/AWS B2.1-8-212-2001
| 主要用于管道的、在ERXX焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-8-213-1997
| 主要用于管道的、在焊接条件下(M-8/P-8/S-8,组)1/8到1-1/2英寸E3XX-XX奥氏体不锈钢的药皮焊条电弧焊的标准
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick E3XX-XX, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-8-214-2001
| 标准焊接程序规范(WPS).主要用于管道的,在焊接条件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奥氏体不锈钢
| (M-8/P Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-8-215-2001
| 在 IN3XX和ER3XX焊接条件下、1/8到1-1/2英寸厚的自耗嵌入式奥氏体不锈钢(M-8/P-8/S-8,组1)钨电极惰性气体保
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 Inch Thick IN3XX and ER3XX, As-Welded Condition
|
| ANSI/AWS B2.1-8-216-2001
| 标准焊接程序规范(WPS).焊接用, 1/8到1-1/2英寸厚IN3XX,ER3XX和E3XX-XX的奥氏体不锈钢(M-8/P-8/S-8,组1)的
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch Thick IN3XX, ER3XX, and E3XX-XX, As-Welded Condition
|
| ANSI/AWS B2.1.009-1990
| 10至18号有或无背衬焊态条件下不锈钢(M-8或P-8)钨极气弧焊接
| Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1.013-1991
| 在焊接条件下、有或没有垫板、10到18规格(M-8/P-8)奥氏体不锈钢的药皮焊条电弧焊的标准焊接程序规范(WPS)
| Standard Welding Procedure Specification - Shielded Metal Arc Welding of Austenitic - Stainless Steel (M-8/P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1.014-1991
| 在焊接条件下、有或没有垫板、10到18规格(M-1到M-8/P-8)奥氏体不锈钢的药皮焊条电弧焊的标准焊接程序规范
| (W Standard Welding Procedure Specification - Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS D1.6-1999
| 结构焊接代码.不锈钢
| Structural Welding Code - Stainless Steel
|
| ANSI/AWS D10.4-1986
| 焊接奥氏体铬镍不锈钢管推荐惯例
| Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing, Recommended Practices for
|
| ANSI/AWS D18.1-1999
| 卫生洁具用奥氏体不锈钢管和管道的焊接规范
| Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygenic) Applications
|
| ANSI/AWS D18.2-1999
| 奥氏体不锈钢管内部焊接褪色度指南
| Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
|
| ANSI/AWWA C220-1998
| 4in(100mm)及以上尺寸的不锈钢管
| Stainless Steel Pipe 4 in (100 mm) and Larger
|
| ANSI/AWWA C220a-1999
| 不锈钢管.4英寸.(100 mm) 及更大. ANSI/AWWA C220a-98的附录
| Stainless Steel Pipe, 4 In. (100 mm) and Larger, Addendum to ANSI/AWWA C220a-98
|
| ANSI/AWWA C223-2002
| 结构钢和不锈钢开口套管
| Fabricated Steel and Stainless Steel Tapping Sleeves
|
| ANSI/AWWA C561-2004
| 装配式不锈钢推拉门的AWWA标准
| AWWA Standard for Fabricated Stainless Steel Slide Gates
|
| ANSI/NAAMM HMMA866-2001
| 不锈钢空心金属门和框架指导性规范
| Guide Specifications for Stainless Steel Hollow Metal Doors and Frames
|
| ANSI/SAE J230-1994
| SAE 30302不锈钢弹簧丝和弹簧
| Stainless Steel, SAE 30302, Spring Wire and Springs
|
| ANSI/SAE J405-1998
| SAE锻制不锈钢的化学成分
| Chemical Compositions of SAE Wrought Stainless Steels
|
| ANSI/UL 6A-2003
| 电器用刚性金属导管.铝、青铜及不锈钢
| Electrical Rigid Metal Conduit - Aluminum, Bronze and Stainless Steel
|
| ASME A112.19.3 Supplement 1-20
| 不锈钢卫生设备(为住宅使用设计).补充件1
| (Stainless steel plumbing fixtures (designed for residential use); Supplement 1)
|
| ASME A112.3.1-1993
| 在地上/地下,卫生、暴雨和化工用不锈钢排水系统的安装程序和性能标准
| (Performance standard and installation procedures for stainless steel drainage systems for sanitary, storm, and chemical applications, above and below ground)
|
| ASME B36.19M-1985
| 不锈钢管
| (Stainless steel pipe)
|
| ASME BPVC Section 2 Part A-200
| ASME锅炉和压力容器规程.第2节:材料.第A部分:钢铁材料规范
| (ASME Boiler & Pressure Vessel Code - Section 2: Materials; Part A: Ferrous Material Specifications)
|
| ASTM A 1010-2000
| 高强度马氏体不锈钢板、薄板和带材标准规范
| Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
|
| ASTM A 1010/A 1010M-2001
| 高强度马氏体不锈钢板材、薄板和带材的标准规范
| Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
|
| ASTM A 1016/A 1016Ma-2004
| 铁素体合金钢管、奥氏体合金钢管和不锈钢管一般要求的标准规范
| Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
|
| ASTM A 1021/A 1021M-2005
| 高温设备用马氏体不锈钢锻件和锻坯的标准规范
| Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
|
| ASTM A 153/A 153M-2005
| 钢铁制金属构件上镀锌层(热浸)的标准规范
| Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
|
| ASTM A 167-1999
| 不锈钢和耐热铬镍钢板、薄钢板及带材的标准规范
| Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
|
| ASTM A 217/A 217M-2004
| 高温设备承压部件用合金钢和马氏体不锈钢铸件标准规范
| Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
|
| ASTM A 240/A 240Mb-2006
| 压力容器和通用铬及铬镍不锈钢板、薄板材及带材标准规范
| Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
|
| ASTM A 262a-2002
| 探测奥氏体不锈钢晶间腐蚀敏感度的标准实施规范
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
|
| ASTM A 263-2003
| 包铬的不锈钢板标准规范
| Standard Specification for Stainless Chromium Steel-Clad Plate
|
| ASTM A 268/A 268Ma-2005
| 通用无缝和焊接铁素体与马氏体不锈钢管的标准规范
| Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
|
| ASTM A 269-2004
| 通用无缝和焊接奥氏体不锈钢管标准规范
| Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
|
| ASTM A 270a-2003
| 卫生设施用无缝和焊接奥氏体不锈钢管的标准规范
| Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
|
| ASTM A 276-2006
| 不锈钢钢棒和型材的标准规范
| Standard Specification for Stainless Steel Bars and Shapes
|
| ASTM A 313/A 313M-2003
| 不锈钢弹簧丝的标准规范
| Standard Specification for Stainless Steel Spring Wire
|
| ASTM A 320/A 320Ma-2005
| 低温设备用合金钢和不锈钢螺栓材料标准规范
| Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
|
| ASTM A 356/A 356M-2005
| 汽轮机用厚壁碳素钢、低合金钢和不锈钢铸件的标准规范
| Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
|
| ASTM A 358/A 358M-2005
| 高温设备和通用电熔焊奥氏体铬镍不锈钢管标准规范
| Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
|
| ASTM A 368a-1995
| 不锈钢丝绳的标准规范
| Standard Specification for Stainless Steel Wire Strand
|
| ASTM A 403/A 403M-2006
| 锻制奥氏体不锈钢管配件的标准规范
| Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
|
| ASTM A 453/A 453M-2004
| 具有同奥氏体不锈钢相似的膨胀系数的耐高温螺栓材料用标准规范
| Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
|
| ASTM A 473-2001
| 不锈钢锻件标准规范
| Standard Specification for Stainless Steel Forgings
|
| ASTM A 478-1997
| 铬镍不锈钢和耐热钢制的编织钢丝的标准规范
| Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
|
| ASTM A 479/A 479Ma-2006
| 锅炉及其它压力容器用不锈钢棒材与型材的标准规范
| Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
|
| ASTM A 492-1995
| 不锈钢丝绳的标准规范
| Standard Specification for Stainless Steel Rope Wire
|
| ASTM A 493-1995
| 冷镦和冷锻不锈钢钢丝的标准规范
| Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
|
| ASTM A 511-2004
| 无缝不锈钢机械管道的标准规范
| Standard Specification for Seamless Stainless Steel Mechanical Tubing
|
| ASTM A 554-2003
| 焊接的不锈钢机械管用标准规范
| Standard Specification for Welded Stainless Steel Mechanical Tubing
|
| ASTM A 555/A 555M-2005
| 不锈钢丝和线材一般要求的标准规范
| Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
|
| ASTM A 564/A 564M-2004
| 热轧和冷精轧时效硬化不锈钢棒和型材的标准规范
| Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
|
| ASTM A 565/A 565Ma-2005
| 高温设备用马氏体不锈钢棒材的标准规范
| Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
|
| ASTM A 580/A 580M-2006
| 不锈钢线的标准规范
| Standard Specification for Stainless Steel Wire
|
| ASTM A 581/A 581M-1995
| 高速切削用耐热不锈钢丝的标准规范
| Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
|
| ASTM A 581/A 581Mb-1995
| 快削不锈钢丝和钢条标准规范
| Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
|
| ASTM A 582/A 582M-2005
| 高速切削不锈钢棒材的标准规范
| Standard Specification for Free-Machining Stainless Steel Bars
|
| ASTM A 609/A 609M-1991
| 碳素钢,低合金钢和马氏体不锈钢铸件及其超声波检验
| Castings, Carbon, Low-Alloy and Martensitic Stainless Steel, Ultrasonic Examination Thereof
|
| ASTM A 632-2004
| 通用无缝和焊接奥氏体不锈钢管(小直径)标准规范
| Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
|
| ASTM A 666-2003
| 退火或冷加工的奥氏体不锈钢薄板、带材、中厚板和扁棒用标准规范
| Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
|
| ASTM A 688/A 688M-2004
| 焊接的奥氏体不锈钢给水加热器管用标准规范
| Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
|
| ASTM A 693-2006
| 沉淀硬化不锈钢和耐热钢板材、薄板和带材标准规范
| Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
| ASTM A 747/A 747M-2004
| 沉淀硬化不锈钢铸件的标准规范
| Standard Specification for Steel Castings, Stainless, Precipitation Hardening
|
| ASTM A 763-1993
| 铁素体不锈钢晶间腐蚀敏感性检测的标准操作规程
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
|
| ASTM A 774/A 774M-2006
| 低温和中温一般腐蚀情况下用的焊接锻制奥氏体不锈钢配件标准规范
| Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
|
| ASTM A 778-2001
| 焊接未退火的奥氏体不锈钢管形制品标准规范
| Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
|
| ASTM A 789/A 789Mb-2005
| 通用无缝和焊接铁素体/奥氏体不锈钢管的标准规范
| Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
|
| ASTM A 790/A 790Mb-2005
| 无缝和焊接铁素体/奥氏体不锈钢管的标准规范
| Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
|
| ASTM A 793-1996
| 不锈钢轧制楼板的标准规范
| Standard Specification for Rolled Floor Plate, Stainless Steel
|
| ASTM A 799/A 799M-2004
| 估计铁素体含量的不锈钢铸件仪器校准的标准实施规程
| Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
|
| ASTM A 803/A 803M-2003
| 焊接铁素体不锈钢给水加热器管用标准规范
| Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
|
| ASTM A 813/A 813M-2001
| 单或双焊接奥氏体不锈钢管标准规范
| Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
|
| ASTM A 814/A 814M-2005
| 冷加工焊接奥氏体不锈钢管的标准规范
| Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
|
| ASTM A 815/A 815M-2004
| 锻制铁素体、铁素体/奥氏体和马氏体不锈钢管配件标准规范
| Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
|
| ASTM A 872/A 872M-2005
| 腐蚀环境用离心铸造铁素体/奥氏体不锈钢管的标准规范
| Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
|
| ASTM A 887-1989
| 核能设备用经硼酸处理的不锈钢板、薄板及带材
| Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
|
| ASTM A 895-1989
| 易切削不锈钢板、薄板和带材
| Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
|
| ASTM A 90/A 90M-2001
| 镀锌和镀锌合金钢铁制品镀层重量的标准试验方法
| Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
|
| ASTM A 928/A 928M-2005
| 填充金属电熔焊铁素体/奥氏体(二联)不锈钢管标准规范
| Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
|
| ASTM A 943/A 943M-2001
| 喷模制无缝奥氏体不锈钢管的标准规范
| Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
|
| ASTM A 947M-1995
| 构造成的不锈钢薄板的标准规范
| Standard Specification for Textured Stainless Steel Sheet [Metric]
|
| ASTM A 949/A 949M-2001
| 喷模制无缝铁素体/奥氏体不锈钢管的标准规范
| Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
|
| ASTM A 959-2004
| 规定可锻不锈钢统一标准等级成分的标准指南
| Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
|
| ASTM A 959c-2004
| 规定可锻不锈钢统一标准等级成分的标准指南
| Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
|
| ASTM A 967-2005
| 不锈钢零件化学钝化处理的标准规范
| Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
|
| ASTM A 982/A 982M-2005
| 压缩机和涡轮机翼片用不锈钢锻件的标准规范
| Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
|
| ASTM A 988/A 988M-2005
| 高温设备用热等静压压制的不锈钢法兰、配件、阀门和部件的标准规范
| Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
|
| ASTM A 994-2005
| 钢、不锈钢及相关合金产品规范的编辑程序和格式的标准指南
| Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
|
| ASTM A 999/A 999Ma-2004
| 合金钢及不锈钢管一般要求的标准规范
| Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
|
| ASTM B 254-1992
| 不锈钢的制备及电镀的标准规程
| Standard Practice for Preparation of and Electroplating on Stainless Steel
|
| ASTM B 37-2003
| 钢铁制造用铝的标准规范
| Standard Specification for Aluminum for Use in Iron and Steel Manufacture
|
| ASTM B 633-1998
| 钢铁表面的电沉积锌覆层标准规范
| Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
|
| ASTM B 694-2003
| 电缆护套用铜、铜合金、包铜青铜和包铜不锈钢薄板和带材标准规范
| Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
|
| ASTM B 695-2004
| 钢铁表面的锌机械沉积镀层标准规范
| Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
|
| ASTM B 699-1986
| 钢铁表面镉真空沉积镀层标准规范
| Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
|
| ASTM B 849-2002
| 钢铁预处理减小氢脆变危险的标准规范
| Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
|
| ASTM B 853-2002
| 粉末冶金(P/M)硼不锈钢构件的标准规范
| Standard Specification for Powder Metallurgy (P/M) Boron Stainless Steel Structural Components
|
| ASTM B 883-2005
| 金属注模(MIM)钢铁材料的标准规范
| Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
|
| ASTM B 895-2005
| 通过浸入氯化钠溶液评价粉末冶金(P/M)不锈钢零件/样品的耐腐蚀性的标准试验方法 Test
| Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M) Parts/Specimens by Immersion in a Sodium Chloride Solution
|
| ASTM B 912-2002
| 用电抛光法测定不锈钢钝化的标准规范
| Standard Specification for Passivation of Stainless Steels Using Electropolishing
|
| ASTM C 795-2003
| 与奥氏体不锈钢接触用绝热材料标准规范
| Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
|
| ASTM C 929-1994
| 奥氏体不锈钢上用绝热材料的加工、运输、海运、贮藏、验收和应用的标准实施规程
| Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
|
| ASTM E 1010-1984
| 再溶化法作光谱化学分析用钢铁圆盘试样的制备的标准实施规程
| Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
|
| ASTM E 1086-1994
| 用点对面激发技术作不锈钢的光辐射真空光谱测定分析
| Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
|
| ASTM E 1806-1996
| 化合物测定钢铁标准样品的标准操作
| Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
|
| ASTM E 353-1993
| 不锈钢、耐热钢、马氏体钢和其它类似的铬镍铁合金化学分析的标准试验方法
| Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
|
| ASTM E 426-1998
| 无缝焊接管形产品、奥氏体不锈钢的类似合金的电磁(涡电流)检验
| Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys
|
| ASTM E 572a-2002
| 用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法
| Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
|
| ASTM F 1314-2001
| 外科植入用锻制氮增强的22铬13镍5锰2.5钼不锈钢合金棒和钢丝(UNS S20910)标准规范
| Standard Specification for Wrought Nitrogen Strengthened 22 Chromium - 13 Nickel - 5 Manganese - 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
|
| ASTM F 1325-1991
| 不锈钢缝合用针托.一般技术要求和通信试验方法
| Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
|
| ASTM F 1350-2001
| 锻造18铬-14镍-2.5钼不锈钢外科固定用线标准规范
| Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
|
| ASTM F 138-2003
| 外科植入物用锻造18铬-14镍-2.5钼不锈钢棒及钢丝的标准规范(UNS S31673)
| Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
|
| ASTM F 139-2003
| 外科植入物用锻造18铬-14镍-2.5钼不锈钢薄板及带材的标准规范(UNS S31673)
| Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
|
| ASTM F 1586-2002
| 外科植入物用锻制氮加强的21铬10镍3锰2.5钼不锈钢棒(UNS S31675)标准规范
| Standard Specification for Wrought Nitrogen Strengthened 21 Chromium - 10 Nickel - 3 Manganese - 2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675)
|
| ASTM F 1744-1996
| 不锈钢外科器械保养与维护标准导则
| Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
|
| ASTM F 2098-2004
| 保证SDR9交联聚乙烯(PEX)管用金属插件安全的不锈钢夹子的标准规范
| Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings
|
| ASTM F 2181a-2002
| 外科植入物用锻造的无缝不锈钢管的标准规范
| Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
|
| ASTM F 2229-2002
| 外科植入物用氮加强的23锰21铬1钼低镍不锈钢锻造合金棒材和线材的标准规范
| Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
|
| ASTM F 2257-2003
| 外科植入物用锻造无缝或焊接和拉拔18铬-14镍-2.5钼不锈钢小直径管的标准规范(UNS S31673)
| Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
|
| ASTM F 2281-2004
| 耐热及高温设备用不锈钢和镍合金螺栓、六角头螺钉和螺柱的标准规范
| Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
|
| ASTM F 593-2002
| 不锈钢螺栓,六角头螺钉及螺柱标准规范
| Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
|
| ASTM F 594-2002
| 不锈钢螺母标准规范
| Standard Specification for Stainless Steel Nuts
|
| ASTM F 621-1997
| 外科植入用不锈钢锻件的标准规范
| Standard Specification for Stainless Steel Forgings for Surgical Implants
|
| ASTM F 738M-2002
| 不锈钢米制螺栓、螺钉及螺柱(米制)的标准规范
| Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
|
| ASTM F 745-2000
| 铸造和固溶退火外科植入物用18铬12.5镍2.5钼不锈钢的标准规范
| Standard Specification for 18 Chromium-12.5 Nickel-2.5 Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications
|
| ASTM F 836M-2002
| 1型不锈钢米制螺母标准规范
| Standard Specification for Style 1 Stainless Steel Metric Nuts
|
| ASTM F 837Ma-2002
| 不锈钢凹头螺钉螺丝的标准规范(米制)
| Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
|
| ASTM F 837a-2002
| 不锈钢凹头螺钉螺丝的标准规范
| Standard Specification for Stainless Steel Socket Head Cap Screws
|
| ASTM F 879Ma-2002
| 不锈钢圆头及扁平沉头六角螺钉的标准规范(米制)
| Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
|
| ASTM F 879a-2002
| 不锈钢圆头及扁平沉头六角螺钉的标准规范
| Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
|
| ASTM F 880-2002
| 不锈钢凹头定位螺钉标准规范
| Standard Specification for Stainless Steel Socket-Set Screws
|
| ASTM F 880M-2002
| 不锈钢凹头定位螺钉(米制)标准规范
| Standard Specification for Stainless Steel Socket Set Screws [Metric]
|
| ASTM F 899-1995
| 外科器械用的不锈钢锭,棒材和丝材
| Standard Specification for Stainless Steel Billet, Bar, and Wire for Surgical Instruments
|
| ASTM G 108-1994
| 检测AISI304和304L型不锈钢增感作用的电化学再活化性(EPR)的测试方法
| Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
|
| ASTM G 123-2000
| 沸腾酸化氯化钠溶液中不同镍合量不锈钢合金应力腐蚀裂纹评定的标准试验方法
| Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
|
| ASTM G 35-1998
| 不锈钢及有关镍铬铁合金在连多硫酸中应力腐蚀断裂灵敏性测定的标准实施规程
| Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
|
| ASTM G 48-2003
| 用氯化铁溶液测定不锈钢及有关合金耐点腐蚀和缝隙腐蚀的标准试验方法
| Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
|
| UL 6A-2000
| 硬金属导管.铝、青铜和不锈钢
| (Rigid metal conduit - Aluminium, bronze and stainless steel )
|
| 编号 | 中文名称 | 英文名称 |
|---|