| 序号 | 编号 | 中文名称 | 英文名称 |
|---|
| 1 | GB 4793.7-2001 | 测量、控制及实验室用电气设备的安全实验室用离心机的特殊要求 | Safety requirements for electrical equipment for measurement，control and laboratory use--Particular requirements for laboratory centrifuges |
| 2 | JB/T 5153.1-1991 | 板框式加压滤油机 型式与基本参数 | () |
| 3 | JB/T 5153.2-1991 | 板框式加压滤油机 技术条件 | () |
| 4 | JB/T 5153-2006 | 板框式加压滤油机 | () |
| 5 | JB/T 5285-2001 | 真空净油机 | () |
| 6 | DL/T 521-2004 | 真空净油机验收及使用维护导则 | () |
| 7 | DL/T 521-1993(2005) | 真空净油机使用验收导则 | () |
| 8 | GB/T 10895-2004 | 离心机分离机机械振动测试方法 | Centrifuge and separator--Measurementmethod of mechanical vibration |
| 9 | GB/T 10901-2005 | 离心机性能测试方法 | Methods of Performance testing for centrifuge |
| 10 | GB/T 13823.14-1995 | 振动与冲击传感器的校准方法离心机法一次校准 | Methods for the calibration of vibration and shock pick-ups--Primary calibration by centrifuge |
| 11 | GB 19815-2005 | 离心机安全要求 | Safety Requirements for Centrifuge |
| 12 | GB/T 5170.16-2005 | 电工电子产品环境试验设备基本参数检定方法稳态加速度试验用离心机 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test |
| 13 | GB/T 7779-2005 | 离心机型号编制方法 | The model designation of centrifuges |
| 14 | JB/T 5519-1991 | 高速冷冻离心机 | () |
| 15 | GB/T 11188-1989 | 颜料密度的测定(用离心机排除夹带空气) | Determination of density of pigments (using a centrifuge to remove entraind air) |
| 16 | HG/T 3835-2006 | 颜料密度的测定(用离心机排除夹带空气) | () |
| 17 | JB/T 6118-1992 | TCL 沉降过滤离心机 | () |
| 18 | JB/T 7241-1994 | 进动卸料离心机 技术条件 | () |
| 19 | JB/T 7220-1994 | 刮刀卸料离心机 | () |
| 20 | JB/T 5284-1991 | 防爆型刮刀卸料离心机 | () |
| 21 | JB/T 6119-1992 | TCL 沉降过滤离心机 使用规程 | () |
| 22 | JB 6827-1993 | 实验室离心机 机械安全要求 | () |
| 23 | JB/T 7439.6-1994 | 实验室仪器术语 实验室离心机 | () |
| 24 | JB/T 7466-1994 | 实验室离心机 基本参数与型号编制方法 | () |
| 25 | JB/T 8051-1996 | 离心机转鼓强度计算规范 | () |
| 26 | JB 8525-1997 | 离心机安全要求 | () |
| 27 | JB/T 8652-1997 | 螺旋卸料过滤离心机 | () |
| 28 | JB/T 7893.1-1999 | 立式振动离心机 | () |
| 29 | JB/T 8101-1999 | 离心卸料离心机 | () |
| 30 | JB/T 7893.2-1999 | 立式振动离心机用筛网 | () |
| 31 | JB/T 9095-1999 | 离心机、分离机锻焊件常规无损探伤技术规范 | () |
| 32 | JB/T 9508-1999 | 实验室高速离心机转头 型号及参数系列 | () |
| 33 | JB/T 3263-2000 | 卧式振动离心机 | () |
| 34 | SY/T 5612.6-2003 | 钻井液净化系统卧式离心机 | () |
| 35 | JB/T 447-2004 | 活塞推料离心机 | () |
| 36 | NF C42-721-1994 | 测量,控制和实验室用电气设备的安全要求.第2-020部分:实验室离心机特殊要求 | (Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020 : particular requirements for laboratory centrifuges.) |
| 37 | NF U67-001-2000 | 食品加工机.油和脂肪加工的离心机.安全和卫生要求 | (Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements.) |
| 38 | NF B35-207-1969 | 实验室用玻璃器皿.溶血管.康氏管离心机用溶血管 | (LABORATORY GLASSWARE. HEMOLYSIS TUBES. KAHN TUBES SO-CALLED CENTRIFUGE HEMOLYSIS TUBES.) |
| 39 | SY/T 5678-2003 | 钻井液净化系统卧式离心机 | () |
| 40 | JB/T 8865-2001 | 活塞推杆离心机用滤网 | () |
| 41 | EN 12505-2000 | 食品加工机械 加工食用油和油脂的离心机 安全和卫生要求 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
| 42 | EN 61010-2-020-1994 | 测量、控制和试验室用电气设备的安全要求 第2-020部分：实验室离心机的特殊要求 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020, modified) |
| 43 | EN 12547-1999 | 离心机 通用安全要求 | Centrifuges - Common safety requirements |
| 44 | EN ISO 787-23-1995 | 颜料和体质颜料的通用试验方法 第23部分：密度测定(用离心机消除夹带的空气) | General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979) |
| 45 | MT/T 657-1997 | TLL型立式刮刀卸料离心机 | () |
| 46 | JB/T 10411-2004 | 离心机、分离机奥氏体钢锻件超声检测及质量评级 | () |
| 47 | JB/T 502-2004 | 螺旋卸料沉降离心机 | () |
| 48 | EN 12884-1999 | 生物技术 离心机性能标准 | Biotechnology - Performance criteria for centrifuges |
| 49 | UL 61010A-2-020-2002 | 实验室用电气设备.第2部分:实验室离心机的特殊要求 | (Electrical equipment for laboratory use - Part 2: Particular requirements for laboratory centrifuges ) |
| 50 | QB/T 1754-1993 | 造纸机械立式离心机 | () |
| 51 | JB/T 7220-2006 | 刮刀卸料离心机 | () |
| 52 | IEC 61010-2-020-2006 | 测量、控制和实验室用电气设备的安全要求.第2-020部分:实验室离心机的特殊要求 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges |
| 53 | ASTM D 2402-1994 | 纺织纤维保水性的标准试验方法(离心机法) | Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure) |
| 54 | ASTM D 1290-1995 | 用离心机测定水乳化抛光剂中沉积物的标准试验方法 | Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge |
| 55 | ASTM D 5148-1997 | 离心机煤油当量的标准试验方法 | Standard Test Method for Centrifuge Kerosine Equivalent |
| 56 | BS EN ISO 787-23-1980 | 颜料和填充剂的一般试验方法.第23部分:密度的测定(用离心机去除夹带的空气) | General methods of test for pigments and extenders - Determination of density (using a centrifuge to remove entrained air) |
| 57 | BS EN 61010-2-020-1993 | 测量、控制和试验室用电气设备安全性要求.第2-020部分:实验室离心机专门要求 | Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory centrifuges |
| 58 | BS EN 12884-1999 | 生物技术.离心机的性能标准 | Biotechnology - Performance criteria for centrifuges |
| 59 | BS EN 12547-1999 | 离心机.通用安全要求 | Centrifuges - Common safety requirements |
| 60 | BS IEC 61010-3-020-1999 | 测量、控制和实验室用电气设备的安全要求.满足IEC 61010-2-020:1992：实验室离心机的特殊要求的合格鉴定报 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges |
| 61 | BS EN 12505-2000 | 食品加工机械.食用油和油脂处理用离心机.安全和卫生要求 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
| 62 | DIN 58970-2-1982 | 试验室用离心机.相对离心加速度在4000以下的离心机管 | Laboratory centrifuges; centrifuge tubes for relative centrifugal acceleration up to 4000 |
| 63 | DIN EN 61010-2-020-1995 | 测量、控制和实验室用电气设备的安全性要求.第2-020部分:实验室离心机特殊要求 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:1992, modified); German version EN 61010-2-020:1994 |
| 64 | DIN 58970-1-1996 | 试验室用离心机.第1部分:定义、测试、标记 | Laboratory centrifuges - Part 1: Definitions, testing, marking |
| 65 | DIN EN ISO 787-23-1995 | 颜料和体制颜料的通用试验方法.第23部分:密度的测定(用离心机消除夹带的空气) | General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979); German version EN ISO 787-23:1995 |
| 66 | DIN EN 61010-2-020/A1-1996 | 测量、控制、调节和试验室用电气设备安全要求.第2-020部分:实验室离心机特殊要求 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020/A1:1996); German version EN 61010-2-020/A1:1996 |
| 67 | DIN EN 12884-1999 | 生物技术.离心机的性能标准 | Biotechnology - Performance criteria for centrifuges; German version EN 12884:1999 |
| 68 | DIN EN 12547-1999 | 离心机.一般安全性要求 | Centrifuges - Common safety requirements; German version EN 12547:1999 |
| 69 | DIN EN 12505-2001 | 食品加工机械.食用油离心机.安全和卫生要求 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements; German version EN 12505:2000 |
| 70 | IEC/TR 61010-3-020-1999 | 测量、控制和实验室用电气设备的安全要求 第3-020部分:IEC 61010-2-020:1992《实验室离心机的特殊要求》的 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992 - Particular requirements for laboratory centrifuges |
| 71 | ISO 6178-1983 | 离心机 结构和安全规则 圆柱形转鼓壳体内切向应力的计算方法 | Centrifuges; Construction and safety rules; Method for the calculation of the tangential stress in the shell of a cylindrical centrifuge rotor |
| 72 | ISO 787-23-1979 | 颜料和体质颜料的通用试验方法.第23部分:密度测定(用离心机消除夹带的空气) | General methods of test for pigments and extenders; part 23: determination of density (using a centrifuge to remove entrained air) |
| 73 | ISO 5347-7-1993 | 振动与冲击传感器的校准方法 第7部分:离心机法一次校准 | Methods for the calibration of vibration and shock pick-ups; part 7: primary calibration by centrifuge |
| 74 | ISO 5347-8-1993 | 振动与冲击传感器的校准方法 第8部分:双离心机法一次校准 | Methods for the calibration of vibration and shock pick-ups; part 8: primary calibration by dual centrifuge |
| 75 | JIS T1701-1997 | 医用离心机 | Centrifuge for medical use |
| 76 | JB/T 4064-2005 | 上悬式离心机 | () |
| 77 | JB/T 10769.1-2007 | 三足式及平板式离心机 第1部分：型式和基本参数 | Three-column and four-point suspension centrifuges-Part 1:Types and basic parameters |
| 78 | JB/T 10769.2-2007 | 三足式及平板式离心机 第2部分：技术条件 | Three-column and four-point suspension centrifuges-Part 2:Specification |
| 序号 | 编号 | 中文名称 | 英文名称 |
|---|