| 编号 | 中文名称 | 英文名称 |
|---|
| GB/T 229-1994
| 金属夏比缺口冲击试验方法
| Metallic materials-Charpy notch impact test
|
| DL/T 768.7-2002
| 电力金具制造质量 钢铁件热镀锌层
| ()
|
| GB 13456-1992
| 钢铁工业水污染物排放标准
| Discharge standard of water pollutants for iron and steel industry
|
| GB 16487.6-2005
| 进口可用作原料的固体废物环境保护控制标准废钢铁
| Environmental protection control standard for imported solid wastes as raw materials -- Waste and scrap of iron and steel
|
| GB 17567-1998
| 核设施的钢铁和铝再循环再利用的清洁解控水平
| Clearance levels for recycle and reuse of steel and aluminium from nuclear facilities
|
| GB 4223-2004
| 废钢铁
| Iron and steel scraps
|
| GB/T 11261-2006
| 钢铁氧含量的测定脉冲加热惰气熔融-红外线吸收法
| Steel and ironDetermination of oxygen content The pulse heating inert gas fusion-infra-red absorption method
|
| GB/T 11354-2005
| 钢铁零件渗氮层深度测定和金相组织检验
| Determination of nitrided case depth and metallographic microstructure examination for steeliron parts
|
| GB/T 13346-1992
| 金属覆盖层钢铁上的镉电镀层
| Metallic coatings--Electroplated coatingsof cadmium on iron and steel
|
| GB/T 13452.4-1992
| 色漆和清漆钢铁表面上的丝状腐蚀试验
| Paints and varnishes--Filiform corrosion test on steel
|
| GB/T 13912-2002
| 金属覆盖层钢铁制件热浸镀锌层技术要求及试验方法
| Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods
|
| GB/T 14203-1993
| 钢铁及合金光电发射光谱分析法通则
| General rule for photoelectric emission spectroscopic analysis of iron，steel and alloy
|
| GB/T 15519-2002
| 化学转化膜钢铁黑色氧化膜规范和试验方法
| Chemical conversion coatings--Black oxide coating on iron and steel--Specification and test methods
|
| GB/T 17616-1998
| 钢铁及合金牌号统一数字代号体系
| Unified numbering system for designations of iron，steel and alloy
|
| GB/T 18592-2001
| 金属覆盖层钢铁制品热浸镀铝技术条件
| Metallic coating--Hot dipped aluminium coatings on ferrous articles--Specification
|
| GB/T 18683-2002
| 钢铁件激光表面淬火
| Laser surface hardening of iron and steel parts
|
| GB/T 18916.2-2002
| 取水定额第2部分:钢铁联合企业
| Norm of water intake--Part 2:Iron and steel complex
|
| GB/T 19349-2003
| 金属和其他无机覆盖层为减少氢脆危险的钢铁预处理
| Metallic and other inorganic coatings--Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
|
| GB/T 19350-2003
| 金属和其他无机覆盖层为减少氢脆危险的涂覆后钢铁的处理
| Metallic and other inorganic coatings--Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
|
| GB/T 19355-2003
| 钢铁结构耐腐蚀防护锌和铝覆盖层指南
| Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
|
| GB/T 20123-2006
| 钢铁总碳硫含量的测定高频感应炉燃烧后红外吸收法（常规方法）
| Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method)
|
| GB/T 20124-2006
| 钢铁氮含量的测定惰性气体熔融热导法（常规方法）
| Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method)
|
| GB/T 20127.1-2006
| 钢铁及合金痕量元素的测定第1部分：石墨炉原子吸收光谱法测定银含量
| Steel and alloy - Determination of trace element contents Part 1: Determination of silver content by graphite furnace atomic absorption spectrometric method
|
| GB/T 20127.10-2006
| 钢铁及合金痕量元素的测定第10部分：氢化物发生-原子荧光光谱法测定硒含量
| Steel and alloy - Determination of trace element contents Part 10: Determination of selenium content by hydride generation-atomic fluorescence spectrometric method
|
| GB/T 20127.11-2006
| 钢铁及合金痕量元素的测定第11部分：电感耦合等离子体质谱法测定铟和铊含量
| Steel and alloy - Determination of trace element contents Part 11: Determination of indium and thallium content by inductively coupled plasma-mass spectrometric method
|
| GB/T 20127.12-2006
| 钢铁及合金痕量元素的测定第12部分：火焰原子吸收光谱法测定锌含量
| Steel and alloy - Determination of trace element contents Part 12: Determination of zinc content by flame atomic absorption spectrometric method
|
| GB/T 20127.13-2006
| 钢铁及合金痕量元素的测定第13部分：碘化物萃取-苯基荧光酮光度法测定锡含量
| Steel and alloy - Determination of trace element contents Part 13: Determination of tin content by iodide extraction-phenylfluorone photometric method
|
| GB/T 20127.2-2006
| 钢铁及合金痕量元素的测定第2部分：氢化物发生-原子荧光光谱法测定砷含量
| Steel and alloy - Determination of trace element contents Part2: Determination of arsenic content by hydride generation-atomic fluorescence spectrometric method
|
| GB/T 20127.3-2006
| 钢铁及合金痕量元素的测定第3部分：电感耦合等离子体发射光谱法测定钙、镁和钡含量
| Steel and alloy - Determination of trace element contents Part3:Determination of calcium,magnesium,barium content by inductively coupled plasma atomic emission spectrometric method
|
| GB/T 20127.4-2006
| 钢铁及合金痕量元素的测定第4部分：石墨炉原子吸收光谱法测定铜含量
| Steel and alloy - Determination of trace element contents Part 4: Determination of copper content by graphite furnace atomic absorption spectrometric method
|
| GB/T 20127.5-2006
| 钢铁及合金痕量元素的测定第5部分：萃取分离-罗丹明B光度法测定镓含量
| Steel and alloy - Determination of trace element contents Part 5: Determination of gallium content by extraction separation-rhodamine B photometric method
|
| GB/T 20127.6-2006
| 钢铁及合金痕量元素的测定第6部分：没食子酸-示波极谱法测定锗含量
| Steel and alloy - Determination of trace element contents Part 6: Determination of germanium content by gallic acid oscillopolarographic method
|
| GB/T 20127.7-2006
| 钢铁及合金痕量元素的测定第7部分：示波极谱法测定铅含量
| Steel and alloy - Determination of trace element contents Part 7: Determination of lead content by oscillopolarographic method
|
| GB/T 20127.8-2006
| 钢铁及合金痕量元素的测定第8部分：氢化物发生-原子荧光光谱法测定锑含量
| Steel and alloy - Determination of trace element contents Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method
|
| GB/T 20127.9-2006
| 钢铁及合金痕量元素的测定第9部分：电感耦合等离子体发射光谱法测定钪含量
| Steel and alloy - Determination of trace element contents Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method
|
| GB/T 221-2000
| 钢铁产品牌号表示方法
| Notations for designations of iron and steel
|
| GB/T 223.10-2000
| 钢铁及合金化学分析方法铜铁试剂分离-铬天青S光度法测定铝含量
| Methods for chemical analysis of iron，steel and alloy--The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
|
| GB/T 223.11-1991
| 钢铁及合金化学分析方法过硫酸铵氧化容量法测定铬量
| Methods for chemical analysis of iron，steel and alloy--The ammonium persulfate oxidation volumetric method for the determination of chromium content
|
| GB/T 223.12-1991
| 钢铁及合金化学分析方法碳酸钠分离-二苯碳酰二肼光度法测定铬量
| Methodsfor chemical analysis of iron，steel and alloy--The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
|
| GB/T 223.13-2000
| 钢铁及合金化学分析方法硫酸亚铁铵滴定法测定钒含量
| Methods for chemical analysis of iron，steel and alloy--The ammonium ferrous sulfate titrationmethod for the determination of vanadium content
|
| GB/T 223.14-2000
| 钢铁及合金化学分析方法钽试剂萃取光度法测定钒含量
| Methods for chemical analysis of iron，steel and alloy--The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
|
| GB/T 223.16-1991
| 钢铁及合金化学分析方法变色酸光度法测定钛量
| Methods for chemical analysis of iron，steel and alloy--The chromotropic acid photometric method for the determination of titanium content
|
| GB/T 223.17-1989
| 钢铁及合金化学分析方法二安替比林甲烷光度法测定钛量
| Methods for chemical analysis of iron，steel and alloy--The diantipyryl methane photometric method for the determination of titanium content
|
| GB/T 223.18-1994
| 钢铁及合金化学分析方法硫代硫酸钠分离-碘量法测定铜量
| Methods for chemical analysis of iron，steel and alloy--The sodium thiosulfate separation iodimetric method for the determination of copper content
|
| GB/T 223.19-1989
| 钢铁及合金化学分析方法新亚铜灵-三氯甲烷萃取光度法测定铜量
| Methods for chemical analysis of iron，steel and alloy--The neocuproine-chloroform extraction photometric method for the determination of copper content
|
| GB/T 223.20-1994
| 钢铁及合金化学分析方法电位滴定法测定钴量
| Methods for chemical analysis of iron，steel and alloy--The fotentiometric titration method for the determination of cobalt content
|
| GB/T 223.21-1994
| 钢铁及合金化学分析方法5-Cl-PADAB分光光度法测定钴量
| Methods for chemical analysis of iron，steel and alloy--The 5-Cl-PADAB spectrophotometricmethod for the determination of cobalt content
|
| GB/T 223.22-1994
| 钢铁及合金化学分析方法亚硝基R 盐分光光度法测定钴量
| Methods for chemical analysis of iron，steel and alloy--The nitroso-R-salt spectrophotometric method for the determination of cobalt content
|
| GB/T 223.23-1994
| 钢铁及合金化学分析方法丁二酮肟分光光度法测定镍量
| Methods for chemical analysis of iron，steel and alloy--The dimethylglyoxime spectrophotometricmethod for the determination of nickel content
|
| GB/T 223.24-1994
| 钢铁及合金化学分析方法萃取分离-丁二酮肟分光光度法测定镍量
| Methods for chemical analysis of iron，steel and alloy--The extraction separation--The dimethylglyoxime spectrophotometric method for the determination of nickel content
|
| GB/T 223.25-1994
| 钢铁及合金化学分析方法丁二酮肟重量法测定镍量
| Methods for chemical analysis of iron，steel and alloy--The dimethylglyoxime gravimetric method forthe determination of nickel content
|
| GB/T 223.26-1989
| 钢铁及合金化学分析方法硫氰酸盐直接光度法测定钼量
| Methods for chemical analysis of iron，steel and alloy--The thiocyanate direct photometric method for the determination of molybdenum content
|
| GB/T 223.27-1994
| 钢铁及合金化学分析方法硫氰酸盐-乙酸丁酯萃取分光光度法测定钼量
| Methods for chemical analysis of iron，steel and alloy--The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
|
| GB/T 223.28-1989
| 钢铁及合金化学分析方法α-安息香肟重量法测定钼量
| Methods for chemical analysis of iron，steel and alloy--The α-benzoinoxime gravimetric method for the determination of molybdenum content
|
| GB/T 223.29-1984
| 钢铁及合金化学分析方法 载体沉淀-二甲酚橙光度法测定铅量
| Methods for chemical analysis of iron，steel and alloy--The xylenol orange photometric method for determination of lead content after carrier precipit-ation
|
| GB/T 223.3-1988
| 钢铁及合金化学分析方法二安替比林甲烷磷钼酸重量法测定磷量
| Methods forchemical analysis of iron，steel and alloy--The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content
|
| GB/T 223.30-1994
| 钢铁及合金化学分析方法对-溴苦杏仁酸沉淀分离-偶氮胂Ⅲ分光光度法测定锆量
| Methods for chemical analysis of iron，steel and alloy--The arsenazo Ⅲspectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
|
| GB/T 223.31-1994
| 钢铁及合金化学分析方法蒸馏分离-钼蓝分光光度法测定砷量
| Methods for chemical analysis of iron，steel and alloy--The distillation-molybdenum bluespectrophotometric method for the determination of arsenic content
|
| GB/T 223.32-1994
| 钢铁及合金化学分析方法次磷酸钠还原-碘量法测定砷量
| Methods for chemical analysis of iron，steel and alloy--The hypophosphite reduction-iodimetric method for the determination of arsenic content
|
| GB/T 223.33-1994
| 钢铁及合金化学分析方法萃取分离-偶氮氯膦mA光度法测定铈量
| Methods forchemical analysis of iron，steel and alloy--The chlorophosphonago mA photometric method for the determination of cerium content after extraction separation
|
| GB/T 223.34-2000
| 钢铁及合金化学分析方法铁粉中盐酸不溶物的测定
| Methods for chemical analysis of iron，steel and alloy--The determination of hydrochloric acid-insoluble content of iron powders
|
| GB/T 223.36-1994
| 钢铁及合金化学分析方法蒸馏分离-中和滴定法测定氮量
| Methods for chemical analysis of iron，steel and alloy--The neutral titration method for the determination of nitrogen content after distillation separation
|
| GB/T 223.37-1989
| 钢铁及合金化学分析方法蒸馏分离-靛酚蓝光度法测定氮量
| Methods for chemical analysis of iron，steel and alloy--The indophenol blue photometric method for the determination of nitrogen content after distillation separation
|
| GB/T 223.38-1985
| 钢铁及合金化学分析方法离子交换分离-重量法测定铌量
| Methods for chemical analysis of iron，steel and alloy--The anion-exchange separation-gravimetric method for the determination of niobium content
|
| GB/T 223.4-1988
| 钢铁及合金化学分析方法硝酸铵氧化容量法测定锰量
| Methods for chemical analysis of iron，steel and alloy--The volumetric method for determination of manganese content by ammonium nitrate oxidation
|
| GB/T 223.41-1985
| 钢铁及合金化学分析方法离子交换分离-连苯三酚光度法测定钽量
| Methods for chemical analysis of iron，steel and alloy--The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
|
| GB/T 223.42-1985
| 钢铁及合金化学分析方法离子交换分离-溴邻苯三酚红光度法测定钽量
| Methods for chemical analysis of iron，steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalumcontent
|
| GB/T 223.43-1994
| 钢铁及合金化学分析方法钨量的测定
| Methods for chemical analysis of iron，steel and alloy--Determination of tungsten content
|
| GB/T 223.46-1989
| 钢铁及合金化学分析方法火焰原子吸收光谱法测定镁量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrometric method for the determination of magnesium content
|
| GB/T 223.47-1994
| 钢铁及合金化学分析方法载体沉淀-钼蓝光度法测定锑量
| Methods for chemical analysis of iron，steel and alloy--The carrier precipitation-molybdenumblue potometric method for the determination of antimony content
|
| GB/T 223.48-1985
| 钢铁及合金化学分析方法半二甲酚橙光度法测定铋量
| Methods for chemical analysis of iron，steel and alloy--The semixylenol orange photometric method for the determination of bismuth content
|
| GB/T 223.49-1994
| 钢铁及合金化学分析方法萃取分离-偶氮氯膦mA分光光度法测定稀土总量
| Methods for chemical analysis of iron，steel and alloy--Extraction separation-chlorophosphonazo mA spectro-photometric method for the determination of the total rare earth content
|
| GB/T 223.5-1997
| 钢铁及合金化学分析方法还原型硅钼酸盐光度法测定酸溶硅含量
| Methods forchemical analysis of iron，steel and alloy--The reduced molybdosilicate spectro-photometric method for the determination of acid-soluble silicon content
|
| GB/T 223.50-1994
| 钢铁及合金化学分析方法苯基荧光酮-溴化十六烷基三甲基胺直接光度法测定锡量
| Methods for chemical analysis of iron，steel and alloy--The phenylfluorone-CTMAB direct photometric method for the determination of tin content
|
| GB/T 223.51-1987
| 钢铁及合金化学分析方法 5-Br-PADAP 光度法测定锌量
| Methods for chemical analysis of iron，steel and alloy--The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol photometric method for the determination of zinc content
|
| GB/T 223.52-1987
| 钢铁及合金化学分析方法盐酸羟胺-碘量法测定硒量
| Methods for chemical analysis of iron，steel and alloy--The hydroxylamine hydrochloride-iodometric method for the determination of selenium content
|
| GB/T 223.53-1987
| 钢铁及合金化学分析方法火焰原子吸收分光光度法测定铜量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
|
| GB/T 223.54-1987
| 钢铁及合金化学分析方法火焰原子吸收分光光度法测定镍量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrophotometric method for the determination of nickel content
|
| GB/T 223.55-1987
| 钢铁及合金化学分析方法示波极谱( 直接 )法测定碲量
| Methods for chemical analysis of iron，steel and alloy--The direct oscillopolarographic method for the determination of tellerium content
|
| GB/T 223.56-1987
| 钢铁及合金化学分析方法巯基棉分离-示波极谱法测定碲量
| Methods for chemical analysis of iron，steel and alloy--The sulfhydryl cotton fiber separation-oscillopolarographic method for the determination of tellurium content
|
| GB/T 223.57-1987
| 钢铁及合金化学分析方法 萃取分离-吸附催化极谱法测定镉量
| Methods for chemical analysis of iron，steel and alloy--The extraction-absorption catalytic polarographic method for the determination of cadmium content
|
| GB/T 223.58-1987
| 钢铁及合金化学分析方法 亚砷酸钠-亚硝酸钠滴定法测定锰量
| Methods for chemical analysis of iron，steel and alloy--The extraction-absorption catalytic polarographic method for the determination of manganese content
|
| GB/T 223.59-1987
| 钢铁及合金化学分析方法锑磷钼蓝光度法测定磷量
| Methods for chemical analysis of iron，steel and alloy--The sodium arsenite-sodium nitrite titrimetric method for the determination of phosphorus content
|
| GB/T 223.6-1994
| 钢铁及合金化学分析方法中和滴定法测定硼量
| Methods for chemical analysis of iron，steel and alloy--The neutralization titrimetric method for the determination of boron content
|
| GB/T 223.60-1997
| 钢铁及合金化学分析方法高氯酸脱水重量法测定硅含量
| Methods for chemical analysis of iron，steel and alloy--The perchloric acid dehydration gravimetric method for the determination of silicon content
|
| GB/T 223.61-1988
| 钢铁及合金化学分析方法磷钼酸铵容量法测定磷量
| Methods for chemical analysis of iron，steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
|
| GB/T 223.62-1988
| 钢铁及合金化学分析方法乙酸丁酯萃取光度法测定磷量
| Methods for chemical analysis of iron，steel and alloy--The butyl acetate extraction photometric method for the determination of phosphorus content
|
| GB/T 223.63-1988
| 钢铁及合金化学分析方法高碘酸钠(钾)光度法测定锰量
| Methods for chemical analysis of iron，steel and alloy--The sodium (potassium) periodate photometric method for the determination of manganese content
|
| GB/T 223.64-1988
| 钢铁及合金化学分析方法火焰原子吸收光谱法测定锰量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrometric method for the determination of manganese content
|
| GB/T 223.65-1988
| 钢铁及合金化学分析方法火焰原子吸收光谱法测定钴量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrometric method for the determination of cobalt content
|
| GB/T 223.66-1989
| 钢铁及合金化学分析方法硫氰酸盐-盐酸氯丙嗪-三氯甲烷萃取光度法测定钨量
| Methods for chemical analysis of iron，steel and alloy--The thiocyanate chlorpromazine hydrochloride--chloro form extraction photometric method for the determination of tungsten content
|
| GB/T 223.67-1989
| 钢铁及合金化学分析方法还原蒸馏-次甲基蓝光度法测定硫量
| Methods for chemical analysis of iron，steel and alloy--The reducing distillation-methylene blue photometric method for the determination of sulfur content
|
| GB/T 223.68-1997
| 钢铁及合金化学分析方法管式炉内燃烧后碘酸钾滴定法测定硫含量
| Methods for chemical analysis of iron，steel and alloy--The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
|
| GB/T 223.69-1997
| 钢铁及合金化学分析方法 管式炉内燃烧后气体容量法测定碳含量
| Methods for chemical analysis of iron，steel and alloy--The gas-volumetric method after combustion in the pipe furnace for the determination of carbon content
|
| GB/T 223.70-1989
| 钢铁及合金化学分析方法邻菲啰啉分光光度法测定铁量
| Methods for chemical analysis of iron，steel and alloy--The o-phenanthroline spectrophotometric method for the determination of iron content
|
| GB/T 223.71-1997
| 钢铁及合金化学分析方法 管式炉内燃烧后重量法测定碳含量
| Methods for chemical analysis of iron，steel and alloy--The gravimetric method after combustion in the pipe furnace for the determination of carbon content
|
| GB/T 223.72-1991
| 钢铁及合金化学分析方法氧化铝色层分离-硫酸钡重量法测定硫量
| Methods for chemical analysis of iron，steel and alloy--The alumina chromatographic separation-bar-ium sulfate gravimetric method for the determination of sulphur content
|
| GB/T 223.73-1991
| 钢铁及合金化学分析方法三氯化钛-重铬酸钾容量法测定铁量
| Methods for chemical analysis of iron，steel and alloy--The titanium trichloride-potassium dichromate volumetric method for the determination of iron content
|
| GB/T 223.74-1997
| 钢铁及合金化学分析方法非化合碳含量的测定
| Methods for chemical analysis of iron，steel and alloy--The combustion gravimetric/gas-volumetric method for the determination of non-combined carbon content
|
| GB/T 223.75-1991
| 钢铁及合金化学分析方法甲醇蒸馏-姜黄素光度法测定硼量
| Methods for chemical analysis of iron，steel and alloy--The methanol distillation-curcuminphotometric method for the determination of boron content
|
| GB/T 223.76-1994
| 钢铁及合金化学分析方法火焰原子吸收光谱法测定钒量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrometric method for the determination of vanadium content
|
| GB/T 223.77-1994
| 钢铁及合金化学分析方法火焰原子吸收光谱法测定钙量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrometric method for the determination of calcium content
|
| GB/T 223.78-2000
| 钢铁及合金化学分析方法姜黄素直接光度法测定硼含量
| Methods for chemical analysis of iron，steel and alloy--Curcumin spectrophotometric method for the determination of boron content
|
| GB/T 223.8-2000
| 钢铁及合金化学分析方法氟化钠分离-EDTA滴定法测定铝含量
| Methods for chemical analysis of iron，steel and alloy--The sodium fluoride separation--EDTA titration method for the determination of aluminium content
|
| GB/T 223.9-2000
| 钢铁及合金化学分析方法铬天青S光度法测定铝含量
| Methods for chemical analysis of iron，steel and alloy--The chrome azurol S photometric methodfor the determination of aluminium content
|
| GB/T 6807-2001
| 钢铁工件涂装前磷化处理技术条件
| Specifications for phosphating treatment of iron and steel parts before painting
|
| GB/T 9799-1997
| 金属覆盖层钢铁上的锌电镀层
| Metallic coatings--Electroplated coatingsof zinc on iron or steel
|
| JB/T 10174-2000
| 钢铁零件强化喷丸的质量检验方法
| ()
|
| JB/T 5067-1999
| 钢铁制件粉末渗锌
| ()
|
| JB/T 8928-1999
| 钢铁制件机械镀锌
| ()
|
| JB/T 9200-1999
| 钢铁件的火焰淬火回火处理
| ()
|
| JB/T 9206-1999
| 钢铁热浸铝工艺及质量检验
| ()
|
| YB/T 804-1995
| 钢铁渣处理及利用技术术语
| ()
|
| YBJ 64-1991
| 钢铁企业电信设计图形符号
| ()
|
| 编号 | 中文名称 | 英文名称 |
|---|