| 编号 | 中文名称 | 英文名称 |
|---|
| GB 5370-85
| 防污漆样板浅海浸泡试验方法
| Method for testing antifouling panels in shallow submergence
|
| GB/T 18590-2001
| 金属和合金的腐蚀点蚀评定方法
| Corrosion of metals and alloys--Evaluation of pitting corrosion
|
| GB/T 1554-1995
| 硅晶体完整性化学择优腐蚀检验方法
| Test method for crystallographic perfection of silicon by preferential etch techniques
|
| GB/T 10125-1997
| 人造气氛腐蚀试验盐雾试验
| Corrosion tests in artificial atmospheres--Salt spray tests
|
| GB/T 10119-1988
| 黄铜耐脱锌腐蚀性能的测定
| Copper-zinc alloys--Determination of dezincification corrosion resistance
|
| DL/T 5358-2006
| 水电水利工程金属结构设备防腐蚀技术规程
| Technical code for anticorrosion of metal structures in hydroelectric and hydraulic engineering
|
| DL/T 693-1999
| 烟囱混凝土耐酸防腐蚀涂料
| ()
|
| GB 17915-1999
| 腐蚀性商品储藏养护技术条件
| Specifications for storage and preservationof corrosive goods
|
| GB 19521.6-2004
| 腐蚀性危险货物危险特性检验安全规范
| Safety code for inspection of hazardous properties for dangerous goods of corrosive substances
|
| GB 20588-2006
| 化学品分类、警示标签和警示性说明安全规范 金属腐蚀物
| Safety rules for classification、precautionary labelling and precautionary statements of chemicals - Corrosive to metals
|
| GB 20593-2006
| 化学品分类、警示标签和警示性说明安全规范皮肤腐蚀/刺激
| Safety rules for classification、precautionary labelling and precautionary statements of chemicals - Skin corrosion/irritation
|
| GB 5085.1-2007
| 危险废物鉴别标准 腐蚀性鉴别
| ()
|
| GB/T 10123-2001
| 金属和合金的腐蚀基本术语和定义
| Corrosion of metals and alloys--Basicterms and definitions
|
| GB/T 10127-2002
| 不锈钢三氯化铁缝隙腐蚀试验方法
| Ferric chloride crevice corrosion test of stainless steels
|
| GB/T 10582-1989
| 测定因绝缘材料而引起的电解腐蚀的试验方法
| Test methods for determining electrolytic corrosion with insulating materials
|
| GB/T 11112-1989
| 有色金属大气腐蚀试验方法
| Non-ferrous metals atmospheric corrosion testing method
|
| GB/T 11138-1994
| 工业芳烃铜片腐蚀试验法
| Industrial aromatic hydrocarbons--Test method of copper corrosion
|
| GB/T 11297.6-1989
| 锑化铟单晶位错蚀坑的腐蚀显示及测量方法
| Standard method for showing andmeasuring dislocation etch pits in indium antimonide single crystal
|
| GB/T 11377-2005
| 金属和其它无机覆盖层储存条件下腐蚀试验的一般规则
| Metallic and other non-organic coating -- General rules for corrosion tests applicable for storage conditions
|
| GB/T 12466-1990
| 船舶及海洋工程腐蚀与防护术语
| Terminology for corrosion and protection for ship and marine engineering
|
| GB/T 13452.4-1992
| 色漆和清漆钢铁表面上的丝状腐蚀试验
| Paints and varnishes--Filiform corrosion test on steel
|
| GB/T 13671-1992
| 不锈钢缝隙腐蚀电化学试验方法
| Stainless steels--Method of electrochemical test for crevice corrosion
|
| GB/T 14092.5-1993
| 机械产品环境条件工业腐蚀
| Environmental condition for machinery products--Industrial corrosion
|
| GB/T 14093.4-1993
| 机械产品环境技术要求工业腐蚀环境用
| Environmental technical requirements of machinery products for the industrial corrosion environments
|
| GB/T 14142-1993
| 硅外延层晶体完整性检查方法腐蚀法
| Test method for crystallographic perfection of epit-axial layers in silicon by etching techniques
|
| GB/T 14293-1998
| 人造气氛腐蚀试验一般要求
| Corrosion tests in artificial atmospheres--General requirement
|
| GB/T 14834-1993
| 硫化橡胶与金属粘附性及对金属腐蚀作用的测定
| Rubber，vulcanized--Determination of adhesion to，and corrosion of metals
|
| GB/T 15260-1994
| 镍基合金晶间腐蚀试验方法
| Nickel-based alloys--Determination of resistance to intergranular corrosion
|
| GB/T 15333-1994
| 绝缘用胶粘带电腐蚀试验方法
| Test method for electrolysis corrosion of electrical insulating adhesive tapes
|
| GB/T 15555.12-1995
| 固体废物腐蚀性测定玻璃电极法
| Solid waste--Glass electrode test--Method of corrosivity
|
| GB/T 15748-1995
| 船用金属材料电偶腐蚀试验方法
| The method of galvanic corrosion test formetallic ship materials
|
| GB/T 15957-1995
| 大气环境腐蚀性分类
| Corrosivity classification of atmospheric environment
|
| GB/T 15970.1-1995
| 金属和合金的腐蚀应力腐蚀试验第1部分:试验方法总则
| Corrosion of metals and alloys--Stress corrosion testing--Part 1:General guidance on testing procedures
|
| GB/T 15970.2-2000
| 金属和合金的腐蚀应力腐蚀试验第2部分:弯梁试样的制备和应用
| Corrosionof metals and alloys--Stress corrosion testing--Part 2:Preparation and use of bent-beam specimens
|
| GB/T 15970.3-1995
| 金属和合金的腐蚀应力腐蚀试验第3部分:U型弯曲试样的制备和应用
| Corrosion of metals and alloys--Stress corrosion testing--Part 3:Preparation and use of U-bend specimens
|
| GB/T 15970.4-2000
| 金属和合金的腐蚀应力腐蚀试验第4部分:单轴加载拉伸试样的制备和应用
| Corrosion of metals and alloys--Stress corrosion testing--Part 4:Preparation and use of uniaxially loaded tension specimens
|
| GB/T 15970.5-1998
| 金属和合金的腐蚀应力腐蚀试验第5部分:C型环试样的制备和应用
| Corrosion of metals and alloys--Stress corrosion testing--Part 5:Preparation and useof C-ring specimens
|
| GB/T 15970.6-2007
| 金属和合金的腐蚀 应力腐蚀试验 第6部分：恒载荷或恒位移下的预裂纹试样的制备和应用
| ()
|
| GB/T 15970.7-2000
| 金属和合金的腐蚀应力腐蚀试验第7部分:慢应变速率试验
| Corrosion of metals and alloys--Stress corrosion testing--Part 7:Slow strain rate testing
|
| GB/T 15970.8-2005
| 金属和合金的腐蚀应力腐蚀试验第8部分:焊接试样的制备和应用
| Corrosion of metals and alloys-Stress corrosion test Part8:Preparation and use of specimens to evaluate weldments
|
| GB/T 15970.9-2007
| 金属和合金的腐蚀 应力腐蚀试验 第9部分：渐增式载荷或渐增式位移下的预裂纹试样的制备和应用
| ()
|
| GB/T 16266-1996
| 包装材料试验方法接触腐蚀
| Test of packaging materials--Contact corrosivity
|
| GB/T 16545-1996
| 金属和合金的腐蚀腐蚀试样上腐蚀产物的清除
| Corrosion of metals and alloys--Removal of corrosion products from corrosion test specimens
|
| GB/T 17214.4-2005
| 工业过程测量和控制装置的工作条件第4部分：腐蚀和侵蚀影响
| Operating conditions for industrial-process measurement and control equipment Part 4:Corrosive and erosive influences
|
| GB/T 17506-1998
| 船舶黑色金属腐蚀层的电子探针分析方法
| The method of electron probe microanalysis as corrosive layer on ferrous metals of ship
|
| GB/T 17897-1999
| 不锈钢三氯化铁点腐蚀试验方法
| Test of pitting corrosion resistance of stainless steels in the ferric chloride solution
|
| GB/T 18593-2001
| 熔融结合环氧粉末涂料的防腐蚀涂装
| Anti-corrosive painting of fusion bonded epoxy coating powders
|
| GB/T 18749-2002
| 耐化学腐蚀陶瓷塔填料技术条件
| Standard specification for chemical--Resistant ceramic tower packings
|
| GB/T 18912-2002
| 光伏组件盐雾腐蚀试验
| Salt mist corrosion testing of photovoltaic(PV)modules
|
| GB/T 18982-2003
| 集装箱用耐腐蚀钢板及钢带
| Corrosion resistant steel plates and strips for con-tainer
|
| GB/T 19285-2003
| 埋地钢质管道腐蚀防护工程检验
| Inspection of corrosion protection for buried steel pipelines
|
| GB/T 19291-2003
| 金属和合金的腐蚀腐蚀试验一般原则
| Corrosion of metals and alloys--General principles for corrosion testing
|
| GB/T 19292.1-2003
| 金属和合金的腐蚀大气腐蚀性分类
| Corrosion of metals and alloys--Corrosivity of atmospheres--Classification
|
| GB/T 19292.2-2003
| 金属和合金的腐蚀大气腐蚀性腐蚀等级的指导值
| Corrosion of metals andalloys--Corrosivity of atmospheres--Guiding values for the corrosivity categories
|
| GB/T 19292.3-2003
| 金属和合金的腐蚀大气腐蚀性污染物的测量
| Corrosion of metals and alloys--Corrosivity of atmospheres--Measurement of pollution
|
| GB/T 19292.4-2003
| 金属和合金的腐蚀大气腐蚀性用于评估腐蚀性的标准试样的腐蚀速率的测定
| Corrosion of metals and alloys--Corrosivity of atmospheres--Determination of corrosion rate of standard specimens for the evaluation of corrosivity
|
| GB/T 19353-2003
| 搪玻璃釉密闭系统中的腐蚀试验
| Vitreous and porcelain enamels--Corrosion tests in closed systems
|
| GB/T 19355-2003
| 钢铁结构耐腐蚀防护锌和铝覆盖层指南
| Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
|
| GB/T 1970-1996
| 多孔陶瓷耐酸、碱腐蚀性能试验方法
| Test method for acid and alkaline-resistance of porous ceramic
|
| GB/T 19745-2005
| 人造低浓度污染气氛中的腐蚀试验
| Corrosion tests in artificial atmosphere at very low Concentrations of polluting gas(es)
|
| GB/T 19746-2005
| 金属和合金的腐蚀盐溶液周浸试验
| Corrosion of metals and alloys-Alternate immersion test in salt solution
|
| GB/T 19747-2005
| 金属和合金的腐蚀双金属室外暴露腐蚀试验
| Corrosion of metals and alloys-Determination of bimetallic Corrosion in outdoor exposure corrosion tests
|
| GB/T 20120.1-2006
| 金属和合金的腐蚀腐蚀疲劳试验第1部分：循环失效试验
| Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing
|
| GB/T 20120.2-2006
| 金属和合金的腐蚀腐蚀疲劳试验第2部分：预裂纹试验裂纹扩展试验
| Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens
|
| GB/T 20121-2006
| 金属和合金的腐蚀人造气氛的腐蚀试验间歇盐雾下的室外加速试验（疮痂试验）
| Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
|
| GB/T 20122-2006
| 金属和合金的腐蚀滴落蒸发试验的应力腐蚀开裂评价
| Corrosion of metals and alloys -- Evaluation of stress corrosion cracking by the drop evaporation test
|
| GB/T 20852-2007
| 金属和合金的腐蚀 大气腐蚀防护方法的选择导则
| ()
|
| GB/T 20853-2007
| 金属和合金的腐蚀 人造大气中的腐蚀 暴露于间歇喷洒盐溶液和潮湿循环受控条件下的加速腐蚀试验
| ()
|
| GB/T 20854-2007
| 金属和合金的腐蚀 循环暴露在盐雾、“干”和“湿”条件下的加速试验
| ()
|
| GB/T 2423.51-2000
| 电工电子产品环境试验第2部分:试验方法试验Ke:流动混合气体腐蚀试验
| Environmental testing for electric and electronic products--Part 2:Test methods--Test Ke:Flowing mixed gas corrosion test
|
| GB/T 2424.10-1993
| 电工电子产品基本环境试验规程大气腐蚀加速试验的通用导则
| Basic environmental testing procedures for electric and electronic products--General guidanceof accelerated testing for atmospheric corrosion
|
| GB/T 2951.10-1997
| 电缆绝缘和护套材料的通用试验方法第5部分:填充膏专用试验方法第1节:滴点----油分离----低温脆性----总酸值
| Common test methods for insulating and sheathing materials of electric cables--Part 5:Methods specific to filling compounds--Section one:Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive components--Per
|
| GB/T 3810.13-2006
| 陶瓷砖试验方法第13部分:耐化学腐蚀性的测定
| Test methods of ceramic tiles Part 13: Determination of chemical resistance
|
| GB/T 391-1977
| 发动机润滑油腐蚀度测定法
| Determination of corrosion of engine lubricating oils
|
| GB/T 4061-1983
| 硅多晶断面夹层化学腐蚀检验方法
| Polycrystalline silicon--Examination method--Assessment of sandwiches on cross-section by chemical corrosion
|
| GB/T 4334.2-2000
| 不锈钢硫酸-硫酸铁腐蚀试验方法
| Method of ferric sulfate-sulfuric acid test for stainless steels
|
| GB/T 4334.3-2000
| 不锈钢65%硝酸腐蚀试验方法
| Method of 65 percent nitric acid test for stainless steels
|
| GB/T 4334.4-2000
| 不锈钢硝酸-氢氟酸腐蚀试验方法
| Method of nitric-hydrofluoric acid test for stainless steels
|
| GB/T 4334.5-2000
| 不锈钢硫酸-硫酸铜腐蚀试验方法
| Method of copper sulfate-sulfuric acid test for stainless steels
|
| GB/T 4334.6-2000
| 不锈钢5%硫酸腐蚀试验方法
| Method of 5 percent sulfuric acid test for stainless steels
|
| GB/T 5003-1999
| 日用陶瓷器釉面耐化学腐蚀性的测定
| Checking and measuring to the chemical corroding resistance of glazes of domestic ceramics
|
| GB/T 5018-1985
| 润滑脂防腐蚀性试验法
| Standard test method for corrosion preventive properties of lubricating greases
|
| GB/T 5096-1985
| 石油产品铜片腐蚀试验法
| Petroleum products--Corrosiveness to copper--Copper strip test
|
| GB/T 5170.11-1996
| 电工电子产品环境试验设备基本参数检定方法腐蚀气体试验设备
| Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Corrosive gas testing equipments
|
| GB/T 5252-2006
| 锗单晶位错腐蚀坑密度测量方法
| Germanium monocrystal - inspection of dislocation etch pit density
|
| GB/T 5776-2005
| 金属和合金的腐蚀金属和合金在表层海水中暴露和评定的导则
| Corrosion of metals and alloys-Guidelines for exposing and evaluating metals and alloys in surface sea water
|
| GB/T 6384-1986
| 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法
| The testing methods for seawater corrosion in natural environment of metallic materials forship and offshore structures
|
| GB/T 6461-2002
| 金属基体上金属和其他无机覆盖层经腐蚀试验后的试样和试件的评级
| Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
|
| GB/T 6464-1997
| 金属及其覆盖层大气腐蚀试验现场试验的一般要求
| Metals and its coatings--Atmospheric corrosion testing--General requirements for field tests
|
| GB/T 6465-1986
| 金属和其他无机覆盖层腐蚀膏腐蚀试验 (CORR试验)
| Metallic and other non-organic coatings--Corrodkote corrosion test(CORR test)
|
| GB/T 6466-1986
| 电沉积铬层电解腐蚀试验(EC试验)
| Electrodeposited chromium coatings--Electrolytic corrosion testing (EC test)
|
| GB/T 7326-1987
| 润滑脂铜片腐蚀试验法
| Lubricating grease--Corrosiveness to copper--Copper strip test
|
| GB/T 7631.6-1989
| 润滑剂和有关产品(L类)的分类第6 部分:R组 (暂时保护防腐蚀)
| Lubricants and related products (class L)--Classification--Part 6:Family R (Temporary protection against corrosion)
|
| GB/T 7733-1987
| 金属旋转弯曲腐蚀疲劳试验方法
| Metals-rotating bar bending corrosion fatigue testing
|
| GB/T 7988-2002
| 搪玻璃釉耐热氢氧化钠溶液腐蚀性能的测定
| Vitreous and porcelain enamels--Determination of resistance to hot sodium hydroxide
|
| GB/T 7989-2003
| 搪玻璃釉耐沸腾盐酸蒸气腐蚀性能的测定
| Vitreous and porcelain enamels--Determination of resistance to condensing hydrochloric acid vapour
|
| GB/T 7993-2003
| 用在腐蚀条件下的搪玻璃设备的高电压试验方法
| Vitreous and porcelain enamel--Enamelled articles for service under highly corrosive conditions--High voltage test
|
| GB/T 7998-2005
| 铝合金晶间腐蚀测定方法
| Test method for intergranular corrosion of aluminium alloy
|
| GB/T 8034-1987
| 焦化苯类产品铜片腐蚀的测定方法
| Benzol products of coal carbonization--Corrosiveness to copper--Copper strip test
|
| GB/T 9789-1988
| 金属和其他非有机覆盖层通常凝露条件下的二氧化硫腐蚀试验
| Metallic and other non-organic coatings--Sulfur dioxide test with general condensation of moisture
|
| HD 22.13 S1-1996+A1-2000
| 额定电压450/750V及以下的橡胶绝缘电缆 第13部分：烟雾和腐蚀性气体低排放的绝缘和交联聚合物单芯和多芯软
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13: Single and multicore flexible cables, insulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases
|
| HD 22.9 S2-1995+A1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第9部分：烟雾和腐蚀性气体低排放的固定配线用单芯非铠装电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases
|
| HG/T 2377-1992
| 搪玻璃层耐沸腾水腐蚀性能的测定
| ()
|
| HG/T 3172-2002
| 尿素高压设备制造检验方法尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取
| ()
|
| HG/T 3173-2002
| 尿素高压设备制造检验方法尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验
| ()
|
| HG/T 3174-2002
| 尿素高压设备制造检验方法 尿素级超低碳铬镍钼奥氏体 不锈钢的选择性腐蚀检查和金相检查
| ()
|
| HG/T 3178-2002
| 尿素高压设备耐腐蚀不锈钢管子—管板的焊接工艺评定和焊工技能评定
| ()
|
| HG/T 3523-1983
| 冷却水化学处理标准腐蚀试片技术条件
| ()
|
| HG/T 3530-2003
| 工业循环冷却水污垢和腐蚀产物试样的调查、采取和制备
| ()
|
| HG/T 3531-2003
| 工业循环冷却水污垢和腐蚀产物中水分含量的测定
| ()
|
| HG/T 3532-2003
| 工业循环冷却水污垢和腐蚀产物中硫化亚铁含量的测定
| ()
|
| HG/T 3533-2003
| 工业循环冷却水污垢和腐蚀产物中灼烧失重测定方法
| ()
|
| HG/T 3534-2003
| 工业循环冷却水污垢和腐蚀产物中酸不溶物、磷、铁、铝、钙、镁、锌、铜含量测定方法
| ()
|
| HG/T 3535-2003
| 工业循环冷却水污垢和腐蚀产物中硫酸盐含量测定方法
| ()
|
| HG/T 3536-2003
| 工业循环冷却水污垢和腐蚀产物中二氧化碳含量的测定方法
| ()
|
| HG/T 3983-2007
| 耐化学腐蚀现场缠绕玻璃钢大型容器
| Filament wound glass-fiber reinforced thermosetting resin chemical resistant large tanks made on site
|
| HG/T 3984-2007
| 耐化学腐蚀改性聚丙烯储槽
| Modified chemical resistant polypropylene tank
|
| HGJ 229-1991
| 工业设备、管道防腐蚀工程施工及验收规范
| ()
|
| JB/T 10579-2006
| 腐蚀数据统计分析标准方法
| ()
|
| JB/T 10696.5-2007
| 电线电缆机械和理化性能试验方法 第5部分：腐蚀扩展试验
| ()
|
| JB/T 3206-1999
| 防锈油脂加速凝露 腐蚀试验方法
| ()
|
| JB/T 4375-1999
| 电工产品户外、户内腐蚀场所使用环境条件
| ()
|
| JB/T 5275-1991
| Y-W 系列及Y-WF系列 户外及户外化学防腐蚀型三相异步电动机 技术条件( 机座号80-315)
| ()
|
| JB/T 5326-1991
| 仪表用金属材料缝隙腐蚀试验方法
| ()
|
| JB/T 5329.1-1991
| 仪表用耐腐蚀弹性合金 耐硫化物腐蚀OCr15Ni40MoCuTiA1B 弹性合金带材
| ()
|
| JB/T 5329.2-1991
| 仪表用耐腐蚀弹性合金 耐盐酸腐蚀OONi70Mo28V 弹性合金带材
| ()
|
| JB/T 5329.3-1991
| 仪表用耐腐蚀弹性合金 耐氯化物腐蚀OOCr15Ni60Mo16W4弹性合金带材
| ()
|
| JB/T 6073-1992
| 金属覆盖层 实验室全浸腐蚀试验
| ()
|
| JB/T 6074-1992
| 腐蚀试样的制备、清洗和评定
| ()
|
| JB/T 7124-1993
| Y-F 系列防腐蚀型三相异步电动机 技术条件（机座号80-315）
| ()
|
| JB/T 7576-1994
| 户内外防腐蚀旋转电机环境技术要求
| ()
|
| JB/T 7702-1995
| 金属基体上金属和非有机覆盖层盐水滴腐蚀试验（SD试验）
| ()
|
| JB/T 7901-1999
| 金属材料实验室均匀腐蚀全浸试验方法
| ()
|
| JB/T 8424-1996
| 金属覆盖层和有机涂层 天然海水腐蚀试验方法
| ()
|
| JB/T 8427-1996
| 钢结构腐蚀防护热喷涂锌、铝及其合金涂层选择与应用导则
| ()
|
| JB/T 9143-1999
| 缓蚀石棉填料腐蚀试验方法
| ()
|
| JB/T 9237.1-1999
| 工业自动化仪表工作条件 腐蚀和侵蚀影响
| ()
|
| JB/T 9643-1999
| 防腐蚀型油浸式电力变压器
| ()
|
| MT/T 335-1995(2005)
| 单体液压支柱 表面防腐蚀处理技术条件
| ()
|
| QB/T 1901.2-2006
| 表壳体及其附件 金合金覆盖层 第2部分：纯度、厚度、耐腐蚀性能和附着力的测试
| Watch-cases and accessories-Gold alloy coverings-Part 2:Determination of fineness,thickness,corrosion resistance and adhension
|
| QB/T 3801-1999
| 化工用硬聚氯乙烯管材的腐蚀度试验方法
| Test method of corrosion on the unplasticized polyvinyl chloride(PVC)pipes for chemical industry
|
| QB/T 3825-1999
| 轻工产品镀锌白色钝化膜的存在试验及耐腐蚀试验方法
| Testing method of the white chromatic conversion coatings existence and the corrosion resistance of the zinc deposits for the light industrial products
|
| QB/T 3826-1999
| 轻工产品金属镀层和化学处理层的耐腐蚀试验方法中性盐雾试验(NSS)法
| Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products--Neutral salt spraying test (NSS)
|
| QB/T 3827-1999
| 轻工产品金属镀层和化学处理层的耐腐蚀试验方法乙酸盐雾试验(ASS)法
| Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products--Acetic salt spraying test (ASS)
|
| QB/T 3828-1999
| 轻工产品金属镀层和化学处理层的耐腐蚀试验方法铜盐加速乙酸盐雾试验(CASS)法
| Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products--Copper accelerated salt spraying test(CASS)
|
| QB/T 3829-1999
| 轻工产品金属镀层和化学处理层的耐腐蚀试验方法腐蚀膏试验(CORR)法
| Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products--Corrodokote test (CORR)
|
| QB/T 3830-1999
| 轻工产品金属镀层和化学处理层的耐腐蚀试验方法二氧化硫试验法
| Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products--Sulphur dioxide test
|
| QB/T 3831-1999
| 轻工产品金属镀层和化学处理层的抗变色腐蚀试验方法硫化氢试验法
| Anti-color changecorrosion testingmethod of the metal deposits and conversion coatings for the light industrial products--Hydrogen sulfide test
|
| QB/T 3832-1999
| 轻工产品金属镀层腐蚀试验结果的评价
| Evaluation of the corrosion test results of the metal deposits for the light industrial products
|
| QC/T 732-2005
| 乘用车强化腐蚀试验方法
| Accelerated corrosion testing method for passenger car
|
| SD 202-1986(2005)
| 火力发电厂垢和腐蚀产物分析方法
| ()
|
| SH/T 0023-1990(2006年确认)
| 喷气燃料银片腐蚀试验法
| ()
|
| SH/T 0080-1991(2006年确认)
| 防锈油脂腐蚀性试验法
| ()
|
| SH/T 0085-1991（2000）
| 发动机冷却液腐蚀测定法（玻璃器皿法）
| ()
|
| SH/T 0087-1991(2006年确认)
| 发动机冷却液铝泵气穴腐蚀特性试验法
| ()
|
| SH/T 0088-1991(2006年确认)
| 发动机冷却液模拟使用腐蚀测定法
| ()
|
| SH/T 0208-1992(2003)
| 航空液压油热氧化安定性及腐蚀测定法
| ()
|
| SH/T 0232-1992(2003)
| 液化石油气铜片腐蚀试验法
| ()
|
| SH/T 0264-1999(2006年确认)
| 内燃机油高温氧化和轴瓦腐蚀评定法（皮特W-1法）
| ()
|
| SH/T 0265-1992(2006年确认)
| 内燃机油高温氧化和轴瓦腐蚀评定法（L-38法）
| ()
|
| SH/T 0304-1999(2005)
| 电气绝缘油腐蚀性硫试验法
| ()
|
| SH/T 0331-1992(2003)
| 润滑脂腐蚀试验法
| ()
|
| SH/T 0620-1995(2003)
| 发动机冷却液对传热状态下的铸铝合金腐蚀测定法
| ()
|
| SH/T 0649-1997(2003)
| 船用润滑油腐蚀试验法
| ()
|
| SH/T 0723-2002
| 柴油机油腐蚀性能评定法
| ()
|
| SH/T 0752-2005
| 含水难燃液压液抗腐蚀性测定法
| ()
|
| SH/T 0754-2005
| 柴油机油在135℃下腐蚀性能评定法
| ()
|
| SH/T 0788-2006
| 内燃机油高温氧化和轴瓦腐蚀评定法（程序Ⅷ法）
| ()
|
| SH/T 0804-2007
| 电器绝缘油腐蚀性硫试验 银片试验法
| Detection of corrosive sulfur of insulating oils-Siler strip test
|
| SY 0007-1999
| 钢质管道及储罐腐蚀控制工程设计规范
| ()
|
| SY/T 0029-1998
| 埋地钢质检查片腐蚀速率测试方法
| ()
|
| SY/T 0078-1993
| 钢质管道内腐蚀控制标准
| ()
|
| SY/T 0087.1-2006
| 钢制管道及储罐腐蚀评价标准 埋地钢质管道外腐蚀直接评价
| Standard of steel pipeline and tank corrosion assessment steel pipeline external corrosion direct assessment
|
| SY/T 0546-1996
| 腐蚀产物的采集与鉴定
| ()
|
| SY/T 0599-2006
| 天然气地面设施抗硫化物应力开裂和抗应力腐蚀开裂的金属材料要求
| Metallic material requirements-Resistance to sulfide stress cracking and stress corrosion cracking for gas surface equipment
|
| SY/T 10008-2000
| 海上固定式钢质石油生产平台的腐蚀控制
| ()
|
| SY/T 10048-2003
| 腐蚀管道评估的推荐作法
| ()
|
| SY/T 4091-1995
| 滩海石油工程防腐蚀技术规范
| ()
|
| SY/T 546-1996
| 腐蚀产物的采集与鉴定
| ()
|
| SY/T 6151-1995
| 钢质管道管体腐蚀损伤评价方法
| ()
|
| SY/T 6530-2002
| 非腐蚀性气体输送用管线管内涂层
| ()
|
| SY/T 6601-2004
| 耐腐蚀合金管线钢管
| ()
|
| SY/T 6623-2005
| 内覆或衬里耐腐蚀合金复合钢管规范
| ()
|
| SY/T 87-1995
| 钢质管道及储罐腐蚀与防护调查方法标准
| ()
|
| SYJ 30-1987
| 埋地钢质管道及储罐防腐蚀工程基本术语
| ()
|
| SYJ 30-87(2005)
| 埋地钢质管道及储罐防腐蚀工程基本术语
| ()
|
| YB/T 5344-2006
| 铁-铬-镍合金在高温水中应力腐蚀试验方法
| ()
|
| YB/T 5362-2006
| 不锈钢在沸腾氯化镁溶液中应力腐蚀试验方法
| ()
|
| YBJ 215-1988
| YJ呋喃树脂材料防腐蚀工程及验收规程
| ()
|
| 编号 | 中文名称 | 英文名称 |
|---|