编号 | 中文名称 | 英文名称 |
---|---|---|
XP D36-112-2000 | 家政学.使用汽缸或单个油箱里的丁烷或丙烷的家庭装置外部连接用(增强)挠性橡胶管 | (Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using butane or propane from cylinders or individual tanks.) |
NF R15-703-2-1996 | 道路车辆.罩型点火塞及汽缸盖上的座孔尺寸.第2部分:M12×1.25热线点火塞 | (Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 2 : M12 X 1,25 glow-plugs.) |
NF P26-414-1995 | 建筑用五金.“CHUBB“型或带有汽缸的简单150号配有安全锁的立式插锁 | (Building hardware. Simple 150 vertical mortice fitted safety locks, type “chubb“ or with cylinders.) |
NF R15-703-1-1996 | 道路车辆.罩型点火塞及汽缸盖上的座孔尺寸.第1部分:M14×1.25热线点火塞 | (Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 1 : M14 X 1,25 glow-plugs.) |
NF R11-002-1978 | 内燃机.汽缸的数字标志 | (INTERNAL COMBUSTION ENGINES. CYLINDER NUMBERING.) |
NF R12-622-1987 | 道路车辆.安装在底座上的,单汽缸三角皮带传动的空气压缩机.安装尺寸 | (ROAD VEHICLES. BASE-MOUNTED AIR COMPRESSORS,SINGLE CYLINDER V-BELT DRIVE. MOUNTING DIMENSIONS.) |
NF R13-318-2002 | 道路车辆.带平座和16mm六角M14×1.25火花塞及其在汽缸盖上的座孔 | (Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings.) |
NF E48-361-1992 | 液压传动.变量或定量汽缸发动机.控制规范 | (HYDRAULIC FLUID POWER. FIXED AND VARIABLE DISPLACEMENT MOTORS. SPECIFICATION WITH ODER.) |
NF E48-354-1989 | 液压传动.容积泵和容积汽缸功率的测定 | (HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS.) |
ANSI B93.3-1984 | 汽缸孔和活塞杆直径.英制系列 | Cylinder Bore and Piston Rod Diameters - Inch Series |
ANSI/ASTM D5001-2004 | 用汽缸上球式(BOCLE)润滑性评定仪测量航空涡轮机燃料润滑性的试验方法 | Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (Bocle) (05.03) |
ANSI/ASAE S201.4-1982 | 农用拖拉机拖挂型农具、液压遥控汽缸的应用 | Agricultural Tractors and Trailing-Type Agricultural Implements, Application of Hydraulic Remote Control Cylinders to |
ASTM C 1351M-1996 | 用固态垂直汽缸粘滞压缩在104巴(点)和108巴(点)的玻璃黏滞度测定的标准试验方法 | Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa-s and 108 Pa-s by Viscous Compression of a Solid Right Cylinder [Metric] |
ASTM D 5001-2003 | 用汽缸上球式(BOCLE)润滑性评定仪测量航空涡轮机燃料润滑性的标准试验方法 | Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) |
BS 5672-1991 | 往复式内燃机汽缸头的汽缸和阀旋转方向标示和左、右单列发动机定义的规范 | Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines |
BS AU 264-1995 | 道路车辆.带有圆锥形底座的M18x1.5火花塞及其汽缸盖外壳 | Road vehicles - M18 X 1,5 spark-plugs with conical seating and their cylinder head housing |
BS AU 262-1-1995 | 道路车辆.带有圆锥形底座的护套型热线点火塞及其汽缸盖外壳.M14x1.25热线点火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M14 x 1, 25 glow-plugs |
BS AU 262-2-1995 | 道路车辆.带有圆锥形底座的护套型热线点火塞及其汽缸盖外壳.M12x1.25热线点火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M12 x 1.25 glow-plugs |
BS AU 263-1995 | 道路车辆.带有圆锥形底座的M14x1.25压实火花塞及其汽缸盖外壳 | Road vehicles - M14 X 1,25 compact spark-plugs with conical seating and their cylinder head housing |
BS ISO 6020-3-1995 | 液压流体动力.16MPa(160bar)系列单杆汽缸用安装尺寸.内径从250mm到500mm的紧凑式系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series with bores from 250 mm to 500 mm |
BS HC 404-1976 | 铬-钼合金铸件铁环形坩埚(适用于离心铸造和砂型铸造密封环、活塞环和汽缸套筒) | Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners) |
BS ISO 6981-1996 | 液压流体动力.汽缸.杆端孔.安装尺寸 | Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions |
BS ISO 6432-1996 | 气动流体动力.单杆汽缸.10巴(1100kPa)系列.8-25mm的汽缸内径.安装尺寸 | Pneumatic fluid power - Single rod cylinders - 10 bar (1 000 kPa) series - Bores from 8 to 25 mm - Mounting dimensions |
BS ISO 8131-1996 | 液压流体动力.16MPa(160 bar)紧凑式系列单杆汽缸.公差 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Tolerances |
BS ISO 7181-1997 | 液压流体动力.汽缸.汽缸内径和连杆截面比 | Hydraulic fluid power - Cylinders - Bore and rod area ratios |
BS ISO 7180-1997 | 气动流体动力.汽缸.汽缸内径和油口螺纹尺寸 | Pneumatic fluid power - Cylinders - Bore and port thread sizes |
BS ISO 10762-1998 | 液压流体动力.汽缸安装尺寸.10Mpa(100bar)系列 | Hydraulic fluid power - Cylinder mounting dimensions - 10 MPa (100 bar) series |
BS ISO 6020-1-1998 | 液压流体动力.16MPa(160bar)系列单杆汽缸安装尺寸.中型系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Medium series |
BS ISO 1919-1998 | 道路车辆.平底座M14×1.25火花塞及其汽缸盖外壳 | Road vehicles - M14 x 1,25 spark plugs with flat seating and their cylinder head housings |
BS ISO 2704-1998 | 道路车辆.平底座M10×1火花塞及其汽缸盖外壳 | Road vehicles - M10 x 1 spark plugs with flat seating and their cylinder head housings |
BS ISO 13726-1998 | 液压流体动力.内径为250mm-500mm的16MPa(160bar)紧凑式系列单杆汽缸.附件安装尺寸 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions |
BS ISO 2344-1999 | 道路车辆.M14×1.25锥座火花塞及其汽缸盖外壳 | Road vehicles - M14 x 1,25 spark plugs with conical seating and their cylinder head housings |
BS ISO 8137-1997 | 液压流体动力.250巴(25MPa)系列单杆汽缸.油口尺寸 | Hydraulic fluid power - Single rod cylinders, 250 bar (25 MPa) series - Port dimensions |
BS ISO 2705-2000 | 道路车辆.M12×1.25平座火花塞和汽缸盖安装座 | Road vehicles - M12 x 1,25 spark plugs with flat seating and their cylinder head housings |
BS ISO 7425-2-2002 | 液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞杆密封汽缸 | Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings |
BS ISO 2346-2002 | 道路车辆.带平底座的19mm六角形的M14×1.25小型火花塞及其汽缸盖外罩 | Road vehicles - M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
BS ISO 6550-3-2002 | 道路车辆.带锥形座和汽缸盖罩的铠装加热塞.第3部分:M10加热塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M10 glow-plugs |
BS ISO 7425-1-2002 | 液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞密封汽缸 | Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings |
BS ISO 6550-4-2005 | 道路车辆.带锥座封闭型电热塞及其汽缸盖安装孔尺寸.M8 x 1电热塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M8 x 1 glow-plugs |
BS ISO 6022-2006 | 液压传动.25M Pa (250巴)系列单杆汽缸安装尺寸 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series |
BS ISO 10766-2006 | 液压动力.汽缸.活塞及连杆用矩形截面轴承环沟槽尺寸 | Hydraulic fluid power - Cylinders - Housing dimensions forrectangular-sect bearing rings for pistons and rods |
BS ISO 6020-2-2006 | 液压流体动力.16MPa(160bar)系列单杆汽缸用安装尺寸.小型系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series |
DIN 73021-1953 | 汽车发动机旋转方向、汽缸和点火电路的标志 | Designation of the rotational direction, the cylinders and the ignition circuits of motorcar engines |
DIN 44770-1-1982 | 第1部分:气动焊接汽缸、无缓冲双作用、双活塞连接尺寸 | Pneumatic welding cylinder, double acting without cushion, double piston, connection dimensions |
DIN ISO 4395-1985 | 液压传动系统和元件.汽缸.活塞杆螺纹尺寸和型式.等同采用ISO 4395-1985版本 | Fluid power systems and components; cylinders; piston rod thread dimensions and types; identical with ISO 4395, edition 1978 |
DIN ISO 6550-2-1997 | 道路车辆.带圆锥形密封座和汽缸盖孔的火花塞.第2部分:火花塞M12*1,25 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 2: M12 × 1,25 glow-plugs (ISO 6550-2:1994) |
DIN ISO 6550-1-1997 | 道路车辆.锥形密封座火花塞及汽缸盖孔.第1部分:M14×1.25火花塞 | Road vehicles - Sheat-type glow-plugs with seating and their cylinder head housing - Part 1: M14 × 1,25 glow-plugs (ISO 6550-1:1994) |
DIN ISO 2345-1997 | 道路车辆.锥形底座M18×1.5火花塞及汽缸盖座孔 | Road vehicles - M18 × 1,5 spark-plugs with conical seating and their cylinder head housing (ISO 2345:1994) |
DIN ISO 2347-1997 | 道路车辆.锥形底座M14×1.25小型火花塞及汽缸盖座孔 | Road vehicles - M14 × 1,25 compact spark-plugs with conical seating and their cylinder head housing (ISO 2347:1994) |
DIN ISO 2704-2000 | 道路车辆.M10×1平座火花塞及其汽缸盖安装孔 | Road vehicles - M10 × 1 spark-plugs with flat seating and their cylinder head housings (ISO 2704:1998) |
ISO 7285-1995 | 机械化多头点焊用汽缸 | Pneumatic cylinders for mechanized multiple spot welding |
ISO 13340-2001 | 可搬运输汽缸 不可再充气汽缸阀 规范和原机试验 | Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing |
ISO 6550-3-2002 | 道路车辆.带锥形座的罩型热线点火塞及其汽缸盖.第3部分:M10热线点火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow-plugs |
ISO 6550-4-2005 | 道路车辆.带锥座的封闭型电热塞及其汽缸盖.第4部分:M8 x 1电热塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs |
JIS G3473-1988 | 汽缸套筒用碳素钢钢管 シリンダチューブ用炭素鋼鋼管 | Carbon steel tubes for cylinder barrels |
JIS D3103-1989 | 汽车发动机用汽缸衬套 自動車機関用シリンダライナ | Cylinder liners for automotive engines |
JIS B8368-1-2002 | 气压缸的安装尺寸.第1部分:单杆.带固定安装装置的1 MPa系列、方盖、系杆密封型液压气缸(汽缸内径32 mm 至 2 Mounting dimensions for pneumatic cylinders -- Part 1: 空気圧シリンダ取付寸法 ― 第1部:片ロッド ― 1MPaシリーズ,角カバー形・タイロッド締付(取付金具固定)式(内径32mmから250mmまで) | Single rod -- 1 MPa series, square cover and tie rod tightend type with fixed mounting devices (Bores from 32 mm to 250 mm) |
JIS B8368-2-2002 | 气压缸的安装尺寸.第2部分:单杆.带可分离安装装置的1 MPa系列、方盖、系杆密封型液压气缸(汽缸内径32 mm 至 空気圧シリンダ取付寸法 ― 第2部:片ロッド ― 1MPaシリーズ,角カバー形・タイロッド締付(取付金具分離)式(内径32mmから320mmまで) | Mounting dimensions for pneumatic cylinders -- Part 2: Single rod -- 1 MPa series, square cover and tie rod tightend type with detachable mounting devices (Bores from 32 mm to 320 mm) |
JIS B8368-3-2002 | 气压缸的安装尺寸.第3部分:单杆.带固定和可分离安装装置型的1 MPa系列、小缸径液压气缸( 汽缸内径8 mm 至 2 空気圧シリンダ取付寸法 ― 第3部:片ロッド ― 1MPaシリーズ,小内径(取付金具固定又は分離)形(内径8mmから25mmまで) | Mounting dimensions for pneumatic cylinders -- Part 3: Single rod -- 1 MPa series, small bore with fixed and detachable mounting device type (Bores from 8 mm to 25 mm) |
JIS B8368-4-2002 | 气压缸的安装尺寸.第4部分:单杆.1 MPa系列、节省空间型液压气缸(汽缸内径20 mm 至 100 mm) 空気圧シリンダ取付寸法 ― 第4部:片ロッド ― 1MPaシリーズ,薄形(内径20mmから100mmまで) | Mounting dimensions for pneumatic cylinders -- Part 4: Single rod -- 1 MPa series, space saving cylinders (Bores from 20 mm to 100 mm) |
JIS B8367-5-2002 | 液压气缸的安装尺寸.第5部分:单杆.10 MPa系列、方盖、系杆密封型液压气缸(汽缸内径40 mm 至 200 mm) 油圧シリンダ取付寸法―第5部:片ロッド―10MPaシリーズ―角カバー形―タイロッド締付式(内径40mm~200mm) | Mounting dimensions for hydraulic cylinders -- Part 5: Single rod -- 10 MPa series, square cover and tie rod tightend type (Bores from 40 mm to 200 mm) |
JIS B8367-6-2002 | 液压气缸的安装尺寸.第6部分:单杆.10 MPa系列、空间窄小型液压气缸(汽缸内径32 mm 至 100 mm) 油圧シリンダ取付寸法―第6部:片ロッド―10MPaシリーズ―薄形(内径32mmから100mmまで) | Mounting dimensions for hydraulic cylinders -- Part 6: Single rod -- 10 MPa series space saving type (Bores from 32 mm to 100 mm) |
JB/T 3042-1999 | 组合机床 夹紧油缸 系列参数 | () |
JB/T 9834-1999 | 农用双作用油缸 技术条件 | () |
NF E48-019-2003 | 流体动力系统和元件.油缸内径和活塞杆直径.米制系列 | (Fluid power systems and components - Cylinder bores and piston rod diameters - Metric series.) |
EN 13953-2003 | 液化石油气(LPG)用可运输、可再装油缸卸压阀 | Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
JIS D2611-1995 | 汽车部件.使用非石油基液压制动油的液压盘式制动器油缸的弹性防尘罩 自動車部品 ― 非鉱油系液圧ディスクブレーキのゴムブーツ | Automotive parts -- Elastomeric boots of hydraulic disc brakes cylinders using a non-petroleum base hydraulic brake fluid |
JIS D2612-2005 | 汽车部件.使用非石油基液压制动液的液压制动主油缸用储油箱密封件 自動車部品-非鉱油系液圧ブレーキマスタシリンダのリザーバシール | Automotive parts -- Reservoir seals for hydraulic brake master cylinders using a non-petroleum base hydraulic brake fluid |
JIS D2610-2005 | 汽车部件.使用非石油基液压制动液体的液压制动主油缸储油箱用膜片衬垫 自動車部品-非鉱油系液圧ブレーキマスタシリンダのダイヤフラムガスケット | Automotive parts -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid |
编号 | 中文名称 | 英文名称 |