| 编号 | 中文名称 | 英文名称 |
|---|
| EN 10021-1993
| 钢铁制品 一般交货技术条件
| General technical delivery requirements for steel and iron products
|
| EN 10028-7-2000
| 压力用途的钢板制品 第7部分：不锈钢管
| Flat products made of steels for pressure purposes - Part 7: Stainless steels
|
| EN 10036-1989
| 黑色金属材料的化学分析 钢铁中的总碳含量的测定 在氧气中燃烧后的重量分析法
| Chemical analysis of ferrous materials; determination of total carbon in steels and irons; gravimetric method after combustion in a stream of oxygen
|
| EN 10071-1989
| 黑色金属材料的化学分析 钢铁中的锰含量的测定 电势滴定法
| Chemical analysis of ferrous materials; determination of manganese in steels and irons; electrometric titration method
|
| EN 10088-1-1995
| 不锈钢 第1部分：不锈钢目录
| Stainless steels - Part 1: List of stainless steels
|
| EN 10088-2-1995
| 不锈钢 第2部分：一般用及结构用薄板/板材和带材的交货技术条件
| Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes
|
| EN 10088-3-1995
| 不锈钢 第3部分：一般用途的半成品、钢棒、线材和型钢的交货技术条件
| Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes
|
| EN 1011-3-2000
| 焊接 金属材料焊接的推荐规范 第3部分：不锈钢的电弧焊接
| Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
|
| EN 10136-1989
| 黑色金属材料的化学分析 钢铁中的镍含量的测定 火焰原子吸收光谱测定法
| Chemical analysis of ferrous materials; determination of nickel in steels and irons; flame atomic absorption spectrometric method
|
| EN 10151-2002
| 弹簧用不锈钢钢带 交货技术条件
| Stainless steel strip for springs - Technical delivery conditions
|
| EN 10177-1989
| 黑色金属材料的化学分析 钢铁中钙的测定 火焰原子吸收光谱法
| Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method
|
| EN 10184-1989
| 黑色金属材料化学分析 钢铁中磷的测定 分光光度法
| Chemical analysis of ferrous materials; determination of phosphorus in steels and irons; spectrophotometric method
|
| EN 10188-1989
| 黑色金属材料的化学分析 钢铁中铬的测定 火焰原子吸收光谱法
| Chemical analysis of ferrous materials; determination of chromium in steels and irons; flame atomic absorption spectrometric method
|
| EN 10211-1995
| 黑色金属材料的化学分析 钢铁中钛含量测定 火焰原子吸收光谱测定法
| Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method
|
| EN 10212-1995
| 黑色金属材料的化学分析 钢铁中砷含量的测定 分光光度法
| Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method
|
| EN 10222-5-1999+AC-2000
| 压力用途的钢锻件 第5部分：马氏体、奥氏体、奥氏体-铁素体不锈钢
| Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
|
| EN 10228-4-1999
| 钢锻件的无损检测 第4部分：奥氏体和奥氏体-铁素体不锈钢锻件的超声检验
| Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
|
| EN 10250-4-1999
| 一般工程用途的敞口钢模锻件 第4部分：不锈钢
| Open die steel forgings for general engineering purposes - Part 4: Stainless steels
|
| EN 10258-1997
| 冷轧不锈钢窄带材和切割长度 尺寸和形状公差
| Cold-rolled stainless steel narrow strip and cut lengths - Tolerances on dimensions and shape
|
| EN 10259-1997
| 冷轧不锈钢宽带材和金属板/薄板 尺寸和形状公差
| Cold-rolled stainless steel wide strip and plate/sheet - Tolerances on dimensions and shape
|
| EN 10263-5-2001
| 冷加工和冷挤压的钢棒、棒材和线材 第5部分：不锈钢交货的一般技术条件
| Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
|
| EN 10264-4-2002
| 钢丝和钢丝制品 绳用钢丝 第4部分：不锈钢钢丝
| Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
|
| EN 10268-1998
| 冷成形用高屈服强度微合金钢的冷轧扁钢材 交货一般条件
| Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions
|
| EN 10271-1998
| 电镀锌镍的扁钢材 交货技术条件
| Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
|
| EN 10272-2000
| 压力用途的不锈钢棒材
| Stainless steel bars for pressure purposes
|
| EN 10276-1-2000
| 钢铁材料的化学分析 钢和铁中氧的测定 第1部分：氧含量测定中钢试样的取样和制备
| Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
|
| EN 10276-2-2003
| 钢铁材料的化学分析 钢和铁中氧的测定 第2部分：在惰性气体条件下熔融后用红外光谱法测定
| Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas
|
| EN 10277-1-1999
| 光亮型钢材 交货技术条件 第1部分：总则
| Bright steel products - Technical delivery conditions - Part 1: General
|
| EN 10277-2-1999
| 光亮型钢材 交货技术条件 第2部分：一般工程用途钢
| Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
|
| EN 10277-3-1999
| 光亮型钢材 交货技术条件 第3部分：无切削钢
| Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels
|
| EN 10277-4-1999
| 光亮型钢材 交货技术条件 第4部分：表面硬化钢
| Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels
|
| EN 10277-5-1999
| 光亮型钢材 交货技术条件 第5部分：淬火和回火钢
| Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
|
| EN 10278-1999
| 光亮型钢材的尺寸和公差
| Dimensions and tolerances of bright steel products
|
| EN 10306-2001
| 钢铁 带平行法兰的H钢梁和IPE钢梁的超声波检验
| Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
|
| EN 10307-2001
| 无损检测 厚度等于或大于6mm的奥氏体和奥氏体铁素不锈钢板材的超声波检验（反射式探伤法）
| Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
|
| EN 10312-2002
| 传送人类消耗的含水液体（包括水）的焊焊接不锈钢管 交货技术条件
| Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
|
| EN 1124-1-1999
| 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第1部分：要求、测试、质量控制
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
|
| EN 1124-1/prA1-2002
| 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第1部分：要求、测试、质量控制 修改A1
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1
|
| EN 1124-2-1999
| 废水系统用带套管和插口的纵向焊接不锈钢管管道和配件 第2部分：系统S 尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S - Dimensions
|
| EN 1124-3-1999
| 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第3部分：系统X 尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
|
| EN 12072-1999
| 焊接易耗品 不锈钢和耐热钢电弧焊用丝状焊条、金属丝和棒 分级
| Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification
|
| EN 12073-1999
| 焊接易耗品 不锈钢和耐热钢有或无气体遮蔽金属电弧焊接用管状有芯焊条 分级
| Welding consumables - Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels - Classification
|
| EN 12501-2-2003
| 金属材料的防腐 泥土中可能出现的腐蚀 第２部分：低合金和非合金的钢铁材料
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials
|
| EN 13322-2-2003
| 可移动气瓶 再充式焊接不锈钢气瓶 设计与结构 第2部分：不锈钢
| Transportable gas cylinders - Refillable welded steel gas cylinders; Design and construction - Part 2: Stainless steel
|
| EN 13828-2003
| 建筑物阀门 建筑物中饮用水供水用手动铜合金及不锈钢球阀 试验和要求
| Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Test and requirements
|
| EN 14222-2003
| 不锈钢火管锅炉
| Stainless steel shell boilers
|
| EN 1503-1-2000
| 阀门 阀体、阀帽和阀套用材料 第1部分：欧洲标准中规定的钢材
| Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
|
| EN 1503-2-2000
| 阀门 阀体、阀帽和阀套用材料 第2部分：非欧洲标准规定的钢材
| Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards
|
| EN 253-2003
| 分区供暖管 直接掩埋热水网用预隔热连接的管道系统 成套钢铁管道设备的管组件、聚氨酯热绝缘和聚乙烯外覆
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
|
| EN 2596-1988
| 航空航天系列 镀镉不锈钢制径向锯齿锁紧垫圈 尺寸
| Aerospace series - Washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated - Dimensions
|
| EN 2596-1988+AC1-1988
| 航空航天系列 镀镉不锈钢径向锯齿形花键锁紧垫圈 尺寸
| Aerospace series; Washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated; Dimensions
|
| EN 448-2003
| 热水分配管道 地下热水网用预隔热包覆层的管道系统 聚氨酯热绝缘和聚乙烯外覆层的钢铁管的配件
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| EN 488-2003
| 热水分配管道 地下热水网用预先绝热包覆的管道系统 成套钢铁管道设备的管阀门组件、聚氨酯热绝缘和聚乙
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| EN 489-2003
| 热水分配管道 地下热水网用预隔热包覆的管道系统 成套钢铁管道设备的接头组件、聚氨酯热绝缘和聚乙烯外
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| EN 502-1999
| 金属薄板材制成的屋顶产品 不锈钢薄板材全支撑屋顶产品规范
| Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
|
| EN 508-1-2000
| 金属薄板材制成的屋顶产品 钢、铝或不锈钢薄板自支撑产品规范 第1部分：钢
| Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
|
| EN 508-2-2000
| 金属薄板材制成的屋顶产品 钢、铝或不锈钢薄板自支撑产品规范 第2部分：铝
| Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
|
| EN 508-3-2000
| 金属薄板材制成的屋顶产品 钢、铝或不锈钢薄板自支撑产品规范 第3部分：不锈钢
| Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
|
| EN ISO 11124-1-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第1部分：一般介绍及分类
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993)
|
| EN ISO 11124-2-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第2部分：冷硬铸铁丸
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993)
|
| EN ISO 11124-3-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第3部分：高碳铸钢丸和砂
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993)
|
| EN ISO 11124-4-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第4部分：低碳铸钢丸
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993)
|
| EN ISO 11125-1-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第1部分：抽样
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993)
|
| EN ISO 11125-2-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第2部分：颗粒尺寸分布的测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993)
|
| EN ISO 11125-3-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第3部分：硬度测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993)
|
| EN ISO 11125-4-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第4部分：表观密度测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993)
|
| EN ISO 11125-5-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第5部分：缺陷颗粒的百分比和微结构的测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993)
|
| EN ISO 11125-6-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第6部分：外来杂质测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993)
|
| EN ISO 11125-7-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第7部分：含水量测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993)
|
| EN ISO 11126-1-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第1部分：总体介绍和分类(包括技术勘误1
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2:
|
| EN ISO 11126-3-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第3部分：铜精炼渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993)
|
| EN ISO 11126-4-1998
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第4部分：煤炉渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993)
|
| EN ISO 11126-5-1998
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第5部分：镍精炼渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag (ISO 11126-5:1993)
|
| EN ISO 11126-6-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第6部分：炼铁炉渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993)
|
| EN ISO 11126-7-1999
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第7部分：熔融氧化铝
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995)
|
| EN ISO 11126-8-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第8部分：橄榄石砂
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993)
|
| EN ISO 11127-1-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第1部分：抽样
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993)
|
| EN ISO 11127-2-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第2部分：颗粒尺寸分布的测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993)
|
| EN ISO 11127-3-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第3部分：表观密度测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993)
|
| EN ISO 11127-4-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第4部分：通过玻璃载片试验评定硬度
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993)
|
| EN ISO 11127-5-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第5部分：含水量测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993)
|
| EN ISO 11127-6-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第6部分：通过测量电导率测定水溶性杂质
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993)
|
| EN ISO 11127-7-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第7部分：水溶性氯化物的测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993)
|
| EN ISO 1127-1996
| 不锈钢管 尺寸、公差和单位长度的公称质量
| Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length
|
| EN ISO 1461-1999
| 钢铁制件的热浸锌层 规范和试验方法
| Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:1999)
|
| EN ISO 16048-2003
| 耐蚀不锈钢紧固件的钝化
| Passivation of corrosion-resistant stainless steel fasteners (ISO 16048:2003)
|
| EN ISO 2338-1997
| 不淬硬钢和奥氏体不锈钢圆锥销
| Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997)
|
| EN ISO 3506-1-1997
| 耐腐蚀不锈钢紧固件的机械性能 第1部分：螺栓、螺钉和螺柱
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997)
|
| EN ISO 3506-2-1997
| 耐腐蚀不锈钢紧固件的机械性能 第2部分：螺母
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts (ISO 3506-2:1997)
|
| EN ISO 3506-3-1997
| 耐腐蚀不锈钢紧固件的机械性能 第3部分：紧定螺钉及类似的不受应力的螺纹紧固件
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997)
|
| EN ISO 3506-4-2003
| 耐腐蚀不锈钢紧固件的机械性能 第4部分：自攻螺钉
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003)
|
| EN ISO 3651-1-1998
| 不锈钢耐晶间腐蚀的测定 第1部分：奥氏体和铁素奥氏体(二重)不锈钢 用失重测定法在硝酸介质中的腐蚀试验(
| Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998)
|
| EN ISO 3651-2-1998
| 不锈钢耐晶间腐蚀的测定 第2部分：奥氏体、奥氏体和铁素奥氏体(二重)不锈钢 在硫酸介质中的腐蚀试验
| Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998)
|
| EN ISO 3823-1-1998
| 牙科旋转器械 牙钻 第1部分：不锈钢牙钻和硬质合金牙钻
| Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823:1997)
|
| EN ISO 7046-2-1994
| 十字槽沉头(通用头型)螺钉 产品等级A级 第2部分：性能等级 钢8.8级、不锈钢和有色金属
| Cross recessed countersunk flat head screws (common head style) - Grade A - Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals (ISO 7046-2:1990)
|
| EN ISO 7153-1-2000
| 外科器械 金属材料 第1部分：不锈钢
| Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999)
|
| EN ISO 8249-2000
| 焊接 奥氏体和成双铁素体奥氏体镍－铬不锈钢焊接金属中铁素体数(FN)的测定
| Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000)
|
| EN ISO 8442-2-1997
| 与食品接触的材料和制品 刀具与凹形餐具 第2部分：不锈钢及镀银刀具的要求
| Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997)
|
| EN ISO 8501-1 Supplement-2001
| 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分的补充信息：用不同磨料喷砂处理时钢表面
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast
|
| EN ISO 8501-1-2001
| 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分：未涂装的钢材和全面清除原有涂层后钢材
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previo
|
| EN ISO 8501-2-2001
| 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分：局部清除原有涂层后钢材的锈蚀等级
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994)
|
| EN ISO 8502-2-1999
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第2部分：清理过的表面上的氯化物的实验室测定
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992)
|
| EN ISO 8502-3-1999
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第3部分：油漆前预处理后的钢材表面上的灰尘评定
| Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992)
|
| EN ISO 8502-4-1999
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第4部分：油覆前凝露可能性的评定导则
| Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993)
|
| EN ISO 8502-6-1999
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第6部分：分析用可溶性杂质的提取 Bresle法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:1995)
|
| EN ISO 8502-9-2000
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导测定法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)
|
| EN ISO 8503-1-1995
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第1部分：磨料喷射清理表面粗糙度的ISO评
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abr
|
| EN ISO 8503-2-1995
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第2部分：磨料喷射清理表面粗糙度的定级
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce
|
| EN ISO 8503-3-1995
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第3部分：ISO表面轮廓比较仪的校准方法和
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s
|
| EN ISO 8503-4-1995
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第4部分：ISO表面轮廓比较仪的校准方法和
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s
|
| EN ISO 8504-1-2001
| 涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分：总则
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000)
|
| EN ISO 8504-2-2001
| 涂装油漆和有关产品前钢材预处理 表面预处理方法 第2部分：磨料喷射清理
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000)
|
| EN ISO 8504-3-2001
| 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分：手工和动力工具清洗
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993)
|
| EN ISO 8733-1997
| 不淬硬钢或奥氏体不锈钢内螺纹圆柱销
| Parallel pins with internal thread, of unhardened steel or austenitic stainless steel (ISO 8733:1997)
|
| EN ISO 8734-1997
| 淬硬钢和马氏体不锈钢(定位销)圆柱销
| Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997)
|
| EN ISO 8735-1997
| 淬硬钢或马氏体不锈钢内螺纹圆柱销
| Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997)
|
| ENV 10080-1995
| 混凝土加固用钢材 为适于焊接而加筋的混凝土钢B500 棒、 环盘 已焊过的钢筋网的交货技术条件
| Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric / Note: Withdrawn by mistake
|
| ENV 1090-6-2000
| 钢结构制作 第6部分：不锈钢的补充规则
| Execution of steel structures - Part 6: Supplementary rules for stainless steel
|
| ENV 1993-1-4-1996
| 欧洲法典3：钢结构设计 第1-4部分：一般规则 关于不锈钢的补充规则
| Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
|
| ENV ISO 8502-1-1999
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第1部分：可溶性铁锈现场试验
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991)
|
| FZ 92065-2006
| 不锈钢焊接式烘筒
| Stainless steel welding cylinder
|
| prEN 10060-2003
| 热轧圆钢棒 形状和尺寸的公差和尺寸
| Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| prEN 10080-1-1999
| 钢筋混凝土用钢材 可焊钢筋 第1部分：一般要求
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 1: General requirements
|
| prEN 10080-2-1999
| 钢筋混凝土用钢材 可焊钢筋 第2部分：A类交货技术条件
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 2: Technical delivery conditions for class A
|
| prEN 10080-3-1999
| 钢筋混凝土用钢材 可焊钢筋 第3部分：B类交货技术条件
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 3: Technical delivery conditions for class B
|
| prEN 10080-4-1999
| 钢筋混凝土用钢材 可焊钢筋 第4部分：C类交货技术条件
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 4: Technical delivery conditions for class C
|
| prEN 10080-5-1999
| 钢筋混凝土用钢材 可焊钢筋 第5部分：焊接钢筋网交货技术条件
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 5: Technical delivery conditions for welded fabric
|
| prEN 10080-6-1999
| 钢筋混凝土用钢材 可焊钢筋 第6部分：结构梁交货技术条件
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 6: Technical delivery conditions for lattice girders
|
| prEN 10088-1-2001
| 不锈钢 第1部分：不锈钢目录
| Stainless steels - Part 1: List of stainless steels
|
| prEN 10088-2-2001
| 不锈钢 第2部分：一般用及结构用薄板/板材和带材的交货技术条件
| Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general and construction purposes
|
| prEN 10088-3-2001
| 不锈钢 第3部分：一般用及结构用耐腐蚀钢的半成品、钢棒、线材型钢和光亮产品的交货技术条件
| Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general and construction purposes
|
| prEN 10108-2000
| 冷成型螺母和螺栓用圆钢棒 尺寸和公差
| Round steel rod for cold formed nuts and bolts - Dimensions and tolerances
|
| prEN 10138-1-2000
| 预应力钢材 第1部分：一般要求
| Prestressing steels - Part 1: General requirements
|
| prEN 10138-2-2000
| 预应力钢材 第2部分：线材
| Prestressing steels - Part 2: Wire
|
| prEN 10138-3-2000
| 预应力钢材 第3部分：钢绞线
| Prestressing steels - Part 3: Strand
|
| prEN 10138-4-2000
| 预应力钢材 第4部分：棒材
| Prestressing steels - Part 4: Bars
|
| prEN 10138-5-1991
| 预应力钢材 第5部分：淬火和回火线材
| Prestressing steels; part 5: quenched and tempered wire
|
| prEN 10201-1988
| 黑色金属材料的化学分析 钢铁中硅的测定 火焰原子吸收光谱法
| Chemical analysis of ferrous materials; determination of silicon in steel and iron; flame atomic absoption spectrometric method
|
| prEN 10216-5-1998
| 压力用途的无缝钢管 交货技术条件 第5部分：不锈钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
|
| prEN 10217-7-1998
| 压力用途的焊接钢管 交货技术条件 第7部分：不锈钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
|
| prEN 10222-6-1994
| 压力用途的钢锻件 第6部分：奥氏体、马氏体和奥氏体-铁素体不锈钢
| Steel forgings for pressure purposes - Part 6: Austenitic, martensitic and austenitic-ferritic stainless steels
|
| prEN 10296-2-2001
| 机械和一般工程用途的焊接钢管 交货技术条件 第2部分：不锈钢管
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes
|
| prEN 10297-2-2001
| 机械和一般工程用途的无缝环行钢管 交货技术条件 第2部分：不锈钢管
| Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes
|
| prEN 12502-3-2001
| 金属材料的防腐 输水系统中的可能出现的腐蚀 第３部分：热浸镀锌钢铁材料影响因素的评价
| Protection of metallic materials against corrosion - Corrosion likelihood in water - Part 3: Review of the influencing factors for hot dip galvanised ferrous materials
|
| prEN 12502-4-2001
| 金属材料的防腐 输水系统中的可能出现的腐蚀 第４部分：不锈钢影响因素的评价
| Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 4: Review of the influencing factors for stainless steels
|
| prEN 14330-2003
| 内河船 无横档锚链 圆钢环链
| Inland navigation vessels - Studless anchor chain - Round steel link chain
|
| prEN 2596-2002
| 航空航天系列 镀镉不锈钢径向锯齿形花键飞行器操纵杆锁紧垫圈 尺寸
| Aerospace series - Washers, lock with radial serrations in corrosion resisting steel, cadmium plated - Dimensions
|
| prEN 6110-2000
| 航空航天系列 不锈钢100 平头盲螺栓
| Aerospace series - Bolts, blind, 100?flush head, stainless steel
|
| prEN ISO 10806-2003
| 管道工程 皱纹软金属管用非合金及不锈钢配件
| Pipework - Fittings for corrugated metallic hoses (ISO/FDIS 10806:2003)
|
| 编号 | 中文名称 | 英文名称 |
|---|