| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ASTM A 1020/A 1020M-2002 | 锅炉、加热器、热交换器和冷凝器装置的熔焊碳素和碳锰钢管的标准规范 | Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
| ASTM A 178/A 178M-2002 | 电阻焊接碳素钢和碳锰钢锅炉和过热器管的标准规范 | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes |
| ASTM A 455/A 455M-2003 | 压力容器用高强度碳锰钢板标准规范 | Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese |
| ASTM A 529/A 529M-2005 | 结构级高强度碳锰钢的标准规范 | Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality |
| ASTM A 67-2000 | 热加工的低碳钢和高碳钢垫板的标准规范 | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked |
| ASTM A 682/A 682M-2005 | 冷轧高碳钢带材一般要求的标准规范 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For&dup2; |
| ASTM A 684/A 684M-1986 | 冷轧高碳钢带材的标准规范 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
| ASTM B 242-1999 | 电镀用高碳钢制备的标准实施规范 | Standard Guide for Preparation of High-Carbon Steel for Electroplating |
| ASTM E 2209-2002 | 用原子发射光谱法分析高锰钢的标准试验方法 | Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry |
| BS 2772-3-1987 | 矿山运输和提升设备.1.5%锰钢铸件规范 | Colliery haulage and winding equipment - Specification for 1.5% manganese steel castings |
| BS 2S 514-1969 | 碳锰钢薄板和带材规范(淬火和回火条件:77/100MPa)(适用于焊接) | Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding) |
| BS 2S 515-1969 | 碳锰钢薄板和带材规范(退火的)(退火条件:46/59MPa)(适用于焊接) | Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding) |
| BS 2S 92-1964 | 飞机材料规范.碳锰钢(适用于焊接)(40/55吨力/平方英寸;限定等圆断面4英寸) | Specification for aircraft material - Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in) |
| BS 4515-1-2004 | 陆地和近海钢管道焊接规范.碳及碳锰钢管 | Specification for welding of steel pipelines on land and offshore - Carbon and carbon manganese steel pipelines |
| BS 4T 45-1972 | 碳-锰钢管材规格(700 N/mm<上标2>)(管外径大于或等于12.5mm)(可焊接) | Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable) |
| BS EN 13293-2002 | 可运输储气瓶.压缩、液化和溶解气体用的水容量高达0.5升和二氧化碳用的水容量高达１升的可再充装无缝正火碳 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide |
| BS HC 2-1973 | 碳锰钢铸件(550牛顿/平方毫米)规范 | Specification for carbon-manganese steel castings (550 N/mm2) |
| BS T 64-1972 | 碳-锰钢管材规范(550 N/mm<上标2>)(管外径小于12.5mm)(可焊接) | Specification for carbon-manganese steel tube (550 N/mm2) (tube less than 12.5 mm outside diameter) (weldable) |
| DIN EN 13293-2003 | 可运输的储气瓶.压缩、液化和不溶性气体用水容量不超过0.5升以及二氧化碳用水容量不超过1升的可反复灌装可 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalised carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide; German version EN 13293:2002 |
| EN 13293-2002 | 可移动气瓶 1升和1升以下的可移动再充式无缝正火碳锰钢气瓶的设计和建造规范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon managanese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 |
| GB/T 13925-1992 | 铸造高锰钢金相 | Metallographs for high manganese cast steel |
| GB/T 5312-1999 | 船舶用碳钢和碳锰钢无缝钢管 | Carbon and carbon-manganese steel seamlesssteel tubes and pipes for ship |
| GB/T 5680-1998 | 高锰钢铸件 | Austenitic manganese steel castings |
| ISO 13521-1999 | 奥氏体锰钢铸件 | Austenitic manganese steel castings |
| JB/T 5940-1991 | 工程机械 高锰钢铸件通用技术条件 | () |
| JB/T 6404-1992 | 大型高锰钢铸件 | () |
| JIS G3506-2004 | 高碳钢线材 硬鋼線材 | High carbon steel wire rods |
| JIS G5131-1991 | 高锰钢铸件 高マンガン鋼鋳鋼品 | High manganese steel castings |
| NF A04-111-1980 | 钢铁产品.高碳钢线材脱碳深度的显微照相法测定 | (IRON AND STEEL. MICROGRAPHIC DETERMINATION OF THE EXTENT OF DECARBURISATION OF NON ALLOY HIGH CARBON STEEL WIRE ROD.) |
| NF A04-113-1984 | 钢铁产品.由钢锭加工的高碳钢线材.化学杂质成分的描述及使其显示的的宏观检查法 | (Iron and steel. High carbon steel wire rod derived from ingots. Macrographic method of showing and describing the chemical heterogeneity.) |
| NF A36-601-1980 | 锅炉和压力容器用可焊钢制锻件.碳钢和碳锰钢.质量等级和类型 | (WELDED STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. CARBON AND CARBON MANGANESE STEELS. GRADES AND TYPES.) |
| NF A36-605-1982 | 锅炉和压力容器用焊接钢冲压锻件.碳钢和碳锰钢.牌号与型号 | (Weldable steel drip forged articles for boilers and pressure vessels. Carbon and carbon-manganese steels. Grades and types .) |
| NF A49-875-12-2000 | 钢管的无损检验.第12部分:检测表面缺陷用无缝和焊接锰钢管的磁粉检测 | (Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.) |
| NF A49-875-18-2000 | 钢管的无损检验.第18部分:层面缺陷探测用无缝和焊接锰钢管末端磁粉检验 | (Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections.) |
| NF A49-875-5-2000 | 钢管的无损检验.第5部分:检测纵向缺陷用无缝和焊接(除埋弧焊)锰钢管的自动全周边电磁变换器/磁漏试验 | (Non-destructive testing of steel tubes - Part 5 : automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for) |
| NF A49-903-2003 | 可运输的储气瓶.容量为1升及1升以下的可再充装的、可运输无缝正火碳锰钢储气瓶的设计和制造规范 | (Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalised carbon manganese steel gas cylinders up to and including 1 litre.) |
| NF A81-311-1994 | 碳钢、碳锰钢和微合金钢的气体金属电弧焊丝状电极和电积物的分类 | (Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification.) |
| NF F18-001-1988 | 铁路车辆.锰钢磨损板.特性.焊接规定 | (ROLLING STOCK. WEARING PLATES MADE OF MANGANESES STEEL. CHARACTERISTICS. WELDING PRESCRIPTIONS.) |
| QB/T 2272-2007 | 表用Y100Pb易切削高碳钢棒 | Y100Pb Free-cutting High-carbon steel bars for watches |
| SY/T 10004-1996 | 海上平台管节点用碳锰钢板规范 | () |
| SY/T 10051.1-2004 | 海上结构用改良韧性的碳锰钢板规范 | () |
| SY/T 1051.1-2004 | 海上结构用改良韧性的碳锰钢板规范 | () |
| YB/T 036.4-1992(2005) | 冶金设备制造通用技术条件 高锰钢铸件 | () |
| YB/T 169-2000(2006年确认) | 高碳钢盘条索氏体含量金相检测方法 | () |
| 编号 | 中文名称 | 英文名称 |