| 编号 | 中文名称 | 英文名称 |
|---|
| NF A03-117-1983
| 钢铁产品的质量检验
| (Quality control surveillance of steel products.)
|
| NF A03-157-1978
| 钢铁产品.钢材的弯曲试验
| (IRON AND STEEL. BEND TEST ON STEEL.)
|
| NF A03-157-1978
| 钢铁产品.钢材的弯曲试验
| (IRON AND STEEL. BEND TEST ON STEEL.)
|
| NF A03-158-1978
| 钢铁产品.厚度等于或大于0.5mm和小于0.3mm的钢板与钢带的单向弯曲试验
| (IRON AND STEEL. SIMPLE BEND TEST ON STEEL SHEET AND STRIP UNDER 3 MM THICK (FROM AND INCLUDING 0,5 MM UP TO BUT EXCLUDING 3 MM).)
|
| NF A03-172-1980
| 钢铁产品.钢的硬度换算值
| (Iron and steel. Conversion values of steel hardness.)
|
| NF A03-355-1985
| 钢铁产品.蠕变试验
| (Steel products. Creep test.)
|
| NF A03-400-1983
| 钢铁产品.疲劳试验.一般原则.`
| (Iron and steel. General principles of the fatigue test.)
|
| NF A03-401-1983
| 钢铁产品.轴向载荷疲劳试验
| (Iron and steel. Fatigue test by axial loading.)
|
| NF A03-402-1983
| 钢铁产品.回转弯曲疲劳试验
| (Iron and steel. Fatigue test by rotary flexion.)
|
| NF A03-509-1983
| 钢铁产品.疲劳试验机的校准
| (Iron and steel. Calibration of fatigue test machines.)
|
| NF A03-657-1987
| 钢铁产品.挤压试验时,钢冷变形性能的检验
| (Iron and steel products. Steel cold ductility determination. Compression test.)
|
| NF A03-658-2001
| 钢铁.钢薄板和板材塑性应变比值γ的测定方法
| (Iron and steel - Methode of determination of the plastic strain ration r of steel sheet and plate.)
|
| NF A03-659-2001
| 钢铁.钢薄板和板材拉伸应力硬化指数n的测定方法
| (Iron and steel - Method of determination of the tensile strain hardening exponent n of steel sheet and plate.)
|
| NF A03-702-1962
| 钢铁产品.线材试验.铁丝和钢丝的锡涂层试验
| (IRON AND STEEL PRODUCTS. TESTING OF TIN COATINGS ON IRON AND STEEL THREAD.)
|
| NF A03-707-1973
| 钢铁产品.线材试验.线材的简单扭转试验
| (SIMPLE TORSION TESTING OF STEEL WIRES.)
|
| NF A04-105-1986
| 钢铁产品.锻钢中非金属杂质含量的测定方法. 第1部分:宏观法
| (Iron and steel. Methods of determination of the non metallic inclusion content of wrought steels. Part 1 : macroscopic methods.)
|
| NF A04-106-1984
| 钢铁产品.锻钢中非金属杂质含量的测定方法.第2部分:标准图象显微照像法
| (Iron and steel. Methods of determination of content of non metallic inclusions in wrought steel. Part II : micrographic method using standards diagrams.)
|
| NF A04-107-1980
| 钢铁产品.测定非合金钢线材中非金属杂质含量的显微照相方法
| (IRON AND STEEL. MICROGRAPHIC METHOD OF DETERMINATION OF THE NON METALLIC INCLUSION CONTENT OF UNALLOYED WIRE ROD.)
|
| NF A04-110-1984
| 钢铁产品.一般用于三次挤压或拉伸的非合金钢线材.表面检查
| (Iron and steel. Wire rods of non-alloy general purpose steel for wire drawing. Surface examination.)
|
| NF A04-111-1980
| 钢铁产品.高碳钢线材脱碳深度的显微照相法测定
| (IRON AND STEEL. MICROGRAPHIC DETERMINATION OF THE EXTENT OF DECARBURISATION OF NON ALLOY HIGH CARBON STEEL WIRE ROD.)
|
| NF A04-112-1980
| 钢铁产品.沸腾钢线材化学杂质成分的描述及使其显示的显微照相法
| (IRON AND STEEL. MACROGRAPHIC METHOD OF SHOWING AND DESCRIBING THE CHEMICAL HETEROGENEITY OF EFFERVESCENT STEEL WIRE ROD.)
|
| NF A04-113-1984
| 钢铁产品.由钢锭加工的高碳钢线材.化学杂质成分的描述及使其显示的的宏观检查法
| (Iron and steel. High carbon steel wire rod derived from ingots. Macrographic method of showing and describing the chemical heterogeneity.)
|
| NF A04-114-1984
| 钢铁产品.由连续浇注产品加工的高碳连续铸锭钢线材的描述及使其显示的客观检查法化学杂质成分法
| (IRON AND STEEL. HIGH CARBON CONTINUOUS CAST STEEL WIRE ROD. MACROGRAPHIC METHOD OF SHOWING AND DESCRIBING THE CHEMICAL HETEROGENEITY.)
|
| NF A04-201-1984
| 钢铁产品.用非合金结构钢和特殊结构钢热处理.脱碳深度的测定
| (Steel products. Special purpose unalloy and alloy structural steels for heat traitement. Determination of depth of decarburization.)
|
| NF A04-203-1984
| 钢铁产品.表面加热淬火常规深度的测定
| (Steel products. Determination of the effective depth of hardening after flame or induction hardening.)
|
| NF A04-204-1985
| 钢铁产品.表面淬火薄层的整个厚度或常规厚度的测定
| (Steel products. Determination of the total or conventional thickness of surface hardened thin layers.)
|
| NF A04-302-1984
| 钢铁产品.用断裂法对奥氏体晶粒放大倾向和对工具钢淬火深度的测定(谢佛特氏试验)
| (Iron and steel. Determination using fracture test pieces of the austenitic grain growth tendency and of the hardness depth in tool steels (shepherd test).)
|
| NF A04-303-1979
| 钢铁产品.物理试验.Jominy(叁密氏)淬火试验
| (IRON AND STEEL. PHYSICAL TESTS. JOMINY HARDENABILITY TEST.)
|
| NF A04-305-1983
| 钢铁产品.厚度大于或等于６mm的钢板的超声反射检验.质量的定义.试验方法
| (IRON AND STEEL. ULTRASONIC REFLECTION TESTING OF SHEET WITH THICKNESS NOT LESS THAN 6 MM. DEFINITION OF QUALITY. TEST METHODS.)
|
| NF A04-306-2002
| 钢铁.带平行法兰和IPE梁的H梁的超声检验
| (Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams.)
|
| NF A04-312-2002
| 无损检验.对厚度等于或大于6mm的奥氏体和奥氏体铁素体不锈钢扁钢产品的超声波检验(反射法)
| (Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method).)
|
| NF A04-315-3-1998
| 钢材锻造的非损试验.第3部分:铁素体钢和马氏体钢锻造的超声波试验
| (Non-destructive testing of steel forgings. Part 3 : ultrasonic testing of ferritic or martensitic steel forgings.)
|
| NF A04-315-4-1999
| 钢锻件的无损检验.第4部分:奥氏体和奥氏体铁素体不锈钢锻件的超声波检验
| (Non-destructive testing of steel forgings. Part 4 : ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings.)
|
| NF A05-151-1984
| 钢铁产品.用硫印法进行宏观照相检查(鲍法)
| (Steel products. Macrographic examination by sulfur print (Baumann method).)
|
| NF A05-152-1984
| 钢铁产品.用强无机酸进行宏观检查
| (Steel products. Macroscopic examination by etching with strong mineral acids.)
|
| NF A05-153-1984
| 钢铁产品.用铜盐侵蚀法进行宏观检查
| (Iron and steel. Macroscopic examination by means of copper salt etching.)
|
| NF A05-154-1985
| 钢铁产品.金属覆膜技术.(光学检验)
| (Steel products. Metallographic replica techniques. (optical examination).)
|
| NF A05-159-1998
| 不锈钢耐晶间腐蚀的测定.第2部分:铁素体、奥氏体和铁素体奥氏体(二重)不锈钢.含有硫酸的介质中的腐蚀试验
| (Determination of resistance to intergranular corrosion of stainless steels. Part 2 : ferritic, austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in media containing sulfuric acid.)
|
| NF A05-160-1998
| 不锈钢耐晶间腐蚀的测定.第1部分:奥氏体和铁素体奥氏体(二重)不锈钢.测定不锈钢在硝酸介质中质量损失的腐蚀
| (Determination of resistance to intergranular corrosion of stainless steels. Part 1 : austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in nitric acid medium by measurement of loss in mass (Huey test).)
|
| NF A05-305-1981
| 奥氏体不锈钢和镍铬铁奥氏体合金.在四连多硫酸钠中约束晶间腐蚀试验
| (AUSTENITIC STAINLESS STEELS AND NI - CR - FE AUSTENITIC STAINLESS ALLOYS. INTERGRAIN CORROSION UNDER STRESS TEST IN SODIUM TETRATHIONATE.)
|
| NF A06-373-1989
| 冶金材料的化学分析.钢材中含氮量的测定.分光光度法
| (Chemical analysis of ferrous materials. Determination of nitrogen (trace amounts) in steels. Spectrophotometric method.)
|
| NF A06-390-2002
| 钢铁.磷含量的测定.磷钒钼酸盐分光光度法
| (Steel and iron - Determination of phosphorus content - Phosphovanadomolybdate spectrophotometric method.)
|
| NF A06-391-2001
| 钢铁.含碳总量的测定.感应炉燃烧红外线吸收法
| (Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace.)
|
| NF A06-392-2-2003
| 黑色金属的化学分析.钢铁中的氧含量测定.第2部分:在惰性气体中融化后的红外法
| (Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2 : infrared method after fusion under inert gas.)
|
| NF A08-328-1989
| 黑色金属材料的化学分析.钢铁中铬的测定.火焰原子吸收光谱测定法
| (Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method.)
|
| NF A35-021-1998
| 混凝土用钢材.用于增强钢制备的可焊接金属线
| (STEELS FOR CONCRETE. WELDABLE WIRES USED FOR THE FABRICATION OF REINFORCING STEELS.)
|
| NF A35-024-1998
| 混凝土钢材.由直径小于5mm的金属线构成的织物
| (Steels for concrete. Fabric composed of wires with a diameter lower than 5 mm.)
|
| NF A35-052-1987
| 钢铁产品.带改进粘附性的焊接钢丝网和钢丝用非合金钢线材
| (Iron and steel. Unalloyed steel wire rod for welded fabric and wire with improved adherence.)
|
| NF A35-053-1984
| 钢铁产品.热成型或低温成型制造产品用非合金钢线材.型号
| (Iron and steel. Non-alloy steel wire rod for products made by hot or cold forming. Types.)
|
| NF A35-055-1984
| 钢铁产品.涂药焊条用非合金钢线材.等级和型号
| (Iron and steel. Wire rod in non-alloy steel for coated electrodes. Grades and types.)
|
| NF A35-056-1984
| 钢铁产品.气体保护电弧焊和潜弧焊的焊条用合金钢和非合金钢线材.等级和型号
| (Iron and steel. Wire rod in non-alloy and alloy steel for colled electrodes for gas shielded are welding and submerged arc welding. Grades and types.)
|
| NF A35-057-1979
| 钢铁产品.冷成形高强度机械弹簧钢丝制造用非合金钢线材.型号
| (IRON AND STEEL. WIRE RODS MADE OF UNALLOYED STEEL FOR THE MANUFACTURE OF HIGH RESISTING COLD-FORMED SPRING WIRES. TYPES.)
|
| NF A35-564-5-2002
| 冷镦和冷挤压的钢杆材、棒材和线材.第5部分:不锈钢的交货技术条件
| (Steel rod, bars and wire for cold heading and cold extrusion - Part 5 : technical delivery conditions for stainless steels.)
|
| NF A35-565-1994
| 钢铁.轴承钢.类型
| (IRON AND STEEL. BEARING STEELS. TYPES.)
|
| NF A35-566-1983
| 钢铁产品.链条钢.等级和型号
| (Iron and steel products. Chain steels. Grades and types.)
|
| NF A35-572-1995
| 不锈钢.第1部分:不锈钢目录
| (STAINLESS STEELS. PART 1 : LIST OF STAINLESS STEELS. (EUROPEAN STANDARD EN 10088-1).)
|
| NF A35-574-1995
| 不锈钢.第3部分:一般用途的半成品,钢棒,轧制线材和型钢的交货技术条件
| (Stainless steels. Part 3 : technical delivery conditions for semi-finished products, bars, rods, and sections for general purposes.)
|
| NF A35-579-1998
| 内燃机合金和钢材
| (Valve steels and alloys for internal combustion engines.)
|
| NF A35-587-2003
| 弹簧用不锈钢带材.交货技术条件
| (Stainless steel strip for springs - Technical delivery conditions.)
|
| NF A35-590-1992
| 钢铁产品.工具钢
| (IRON AND STEEL. TOOL STEELS.)
|
| NF A36-225-2000
| 压力容器用不锈钢棒
| (Stainless steel bars for pressure purposes.)
|
| NF A36-331-1989
| 钢铁产品.不锈钢.连续镀铅的带材和板材
| (IRON AND STEEL. STAINLESS STEEL. CONTINUOUSLY LEADED SHEET AND STRIP.)
|
| NF A36-331-1989
| 钢铁产品.不锈钢.连续镀铅的带材和板材
| (IRON AND STEEL. STAINLESS STEEL. CONTINUOUSLY LEADED SHEET AND STRIP.)
|
| NF A36-607-1984
| 锅炉和压力容器用自由锻造或模锻法制奥氏体不锈钢零件.质量等级和类型
| (AUSTENITIC STAINLESS STEEL PARTS OBTAINED BY FLAT DIE FORGING OR DROP FORGING FOR BOILERS AND PRESSURE VESSELS. GRADE AND TYPES.)
|
| NF A36-613-1986
| 一般用锻件.不锈钢
| (GENERAL PURPOSE FORGINGS. STAINLESS STEELS.)
|
| NF A36-711-2002
| 无包装钢.用于接触人和动物消耗的食品、产品和饮料的不锈钢
| (Non packaging steel - Stainless steel intended for use in contact with foodstuffs, products and beverages for human and animal consumption.)
|
| NF A37-604-4-2002
| 钢丝和钢丝产品.绳索用钢丝.第4部分:不锈钢钢丝
| (Steel wire and wire products - Steel wire for ropes - Part 4 : stainless steel wire.)
|
| NF A37-611-3-2001
| 机械弹簧用钢丝.第3部分:不锈钢弹簧钢丝
| (Steel wire for mechanical springs - Part 3 : stainless spring steel wire.)
|
| NF A45-006-1982
| 钢铁.热轧六角型钢材.尺寸
| (Iron and steel. Hot rolled hexagon steel. Dimensions.)
|
| NF A45-006-1982
| 钢铁.热轧六角型钢材.尺寸
| (Iron and steel. Hot rolled hexagon steel. Dimensions.)
|
| NF A45-110-1983
| 冶金产品.不锈钢和耐热钢线材和棒材.轧制公差
| (Iron and steel. Stainless and heat resisting steel for bars and wires. Rolling tolerances.)
|
| NF A46-110-1-1997
| 冷轧不锈钢窄带材和切削长度.尺寸与形状公差
| (Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape.)
|
| NF A46-110-2-1997
| 冷轧不锈钢宽带材和板材/薄板.尺寸和形状公差(欧洲标准EN 10259)
| (Cold-rolled stainless steel wide strip and plate/sheet. Tolerances on dimensions and shape.)
|
| NF A47-301-1976
| 钢铁产品.弹簧用非铅浴淬火合金硬质钢制三股圆钢丝
| (IRON AND STEEL. ROUND SPRING STEEL WIRES. PATENTED DRAWN SPRING WIRES OF HARD UNALLOYED STEELS.)
|
| NF A47-301-1976
| 钢铁产品.弹簧用非铅浴淬火合金硬质钢制三股圆钢丝
| (IRON AND STEEL. ROUND SPRING STEEL WIRES. PATENTED DRAWN SPRING WIRES OF HARD UNALLOYED STEELS.)
|
| NF A47-402-1993
| 钢铁制品.低温成型不锈钢长制品的尺度,公差和表面质量
| (IRON AND STEEL PRODUCTS. COLD-FORMED STAINLESS STEEL LONG PRODUCTS. DIMENSIONS, TOLERANCES AND SURFACE QUALITY.)
|
| NF A47-402-1993
| 钢铁制品.低温成型不锈钢长制品的尺度,公差和表面质量
| (IRON AND STEEL PRODUCTS. COLD-FORMED STAINLESS STEEL LONG PRODUCTS. DIMENSIONS, TOLERANCES AND SURFACE QUALITY.)
|
| NF A49-117-1985
| 钢管.管道和其他用途光端无缝钢管.铁素体和奥氏体不锈钢.尺寸.交货技术条件
| (Steel tubes. Seamless plain end tubes for pipes-lines and other uses. Ferritic and austenitic stainless steels. Dimensions. Technical delivery conditions.)
|
| NF A49-147-1980
| 钢管.一般用和管道用光端纵向焊接钢管.奥氏体不锈钢.（尺寸.交货技术条件.）
| (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-148-1980
| 钢管.一般用和管道用光端纵向焊接钢管.铁素体不锈钢.（尺寸.交货技术条件.）
| (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-151-2003
| 包括饮用水在内的含水液体输送用焊接不锈钢管.交货技术件
| (Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.)
|
| NF A49-217-1987
| 钢管.热交换器用无缝管.奥氏体不锈钢和铁素体钢.（尺寸.交货技术条件.）
| (Steel tubes. Seamless tubes for heat exchangers. Stainless ferritic, austenic or ferritoaustenitic steel grades. Dimensions. Technical delivery conditions.)
|
| NF A49-218-1979
| 钢管.奥氏体不锈钢熔炉用无缝钢管.（带标准公差或缩减公差的尺寸.交货技术条件.）
| (STEEL PIPES. SEAMLESS PIPES FOR FURNACES. AUSTENITIC STAINLESS STEELS. DIMENSIONS (WITH NORMAL OR REDUCED TOLERANCES). TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-244-1993
| 钢管.压力设备用焊接奥氏体不锈钢和奥氏铁素体轧制钢管的尺寸和技术交货条件
| (STEEL TUBES. WELDED AUSTENITIC STAINLESS AND AUSTENITIC FERRITIC STEEL ROLLED TUBES FOR PRESSURE SERVICE. DIMENSIONS, TECHNICAL CONDITIONS FOR DELIVERY.)
|
| NF A49-247-1981
| 钢管.热交换器用纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件
| (Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions.)
|
| NF A49-249-1980
| 钢管.食品工业用光端纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件
| (Steel tubes. Longitudinally welded plain end tubes for the food industry. Austenitic stainless steels. Dimensions. Technical delivery conditions.)
|
| NF A49-289-1990
| 钢管.用于高低温条件下的对缝焊接管状配件.非合金、合金和不锈钢.尺寸.技术交货条件
| (Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.)
|
| NF A49-317-1980
| 钢管.机械用光端无缝钢管.奥式体不锈钢.（尺寸.交货技术条件.）
| (STEEL TUBES. SEAMLESS PLAIN END TUBES FOR ENGINEERING USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
|
| NF A49-647-1979
| 钢管.不锈钢、铁素体和奥氏体钢制圆形、正方形、矩形或椭圆形建筑用焊接钢管.（尺寸.交货技术条件.）
| (STEEL TUBES. STRUCTURAL WELDED TUBES,CIRCULAR,SQUARE,RECTANGULAR OR OVAL,IN FERRITIC OR AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL CONDITIONS OF DELIVERY.)
|
| NF A49-950-1996
| 不锈钢管.尺寸、公差和单位长度的规范质量
| (Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length.)
|
| NF A50-421-1994
| 锻铝和铝合金钢材,带材和板材.第2部分:机械性能
| (Aluminium and aluminium alloys. Sheet, strip and plate. Part 2 : mechanical properties.)
|
| NF A72-120-1973
| 钢铁厂.气体管道和大直径阀.带法兰的接头（PN6）
| (LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.)
|
| NF A81-318-1980
| 有不锈钢和/或耐热钢的出的粉末焊剂，电弧焊用实心金属裸焊丝.符号.规范
| (SOLID BARE ELECTRODE WIRES FOR SUBMERGED ARC WELDING,DEPOSITING A STAINLESS AND/OR HEAT-RESISTING STEEL. SYMBOLIZATION. SPECIFICATIONS.)
|
| NF A81-324-1981
| 实心金属裸双焊条.有不锈钢和/或耐热钢析出的电弧焊用粉末焊剂.符号.规范.试验
| (COMBINATIONS OF BARE SOLID-METAL ELECTRODE WIRES AND POWER FLUXES FOR ELECTRIC ARC WELDING,DEPOSITING A STAINLESS AND/OR REFRACTORY STEEL. SYMBOLIZATION. REQUIREMENTS. TEST.)
|
| NF A89-101-3-2000
| 焊接.金属材料焊接的推荐方法.第3部分:不锈钢的电弧焊
| (Welding - Recommendations for welding of metallic materials - Part 3 : arc welding of stainless steels.)
|
| NF A89-207-2000
| 焊接.在奥氏体和双重铁素体奥氏体铬镍不锈钢焊接金属中铁素体数目的测定
| (Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals.)
|
| NF C28-495-2002
| 继电器用磁性材料(钢铁)
| (Magnetic materials (iron and steel) for use in relays.)
|
| NF D29-011-2-1998
| 与食品料有关的材料和物质.餐具和凹型餐具.第2部分:不锈钢和镀银餐具的要求
| (MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFF. CUTLERY AND TABLE HOLLOWAR. PART 2 : REQUIREMENTS FOR STAINLESS STEEL AND SILVER-PLATED CUTLERY. (EUROPEAN STANDARD EN ISO 8442-2).)
|
| NF D36-406-2004
| 建筑物用阀.建筑物内饮用水给水用手动铜合金和不锈钢球阀.试验和要求
| (Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements.)
|
| NF E25-035-1995
| 紧固件.不锈钢螺纹连接件.试验方法.使用合格证
| (FASTENERS. STAINLESS STEEL THREADED CONNECTIONS. TEST METHODS. FITNESS FOR USE.)
|
| NF E25-042-2003
| 耐腐蚀不锈钢紧固件的钝化
| (Passivation of corrosion-resistant stainless-steel fasteners.)
|
| NF E25-100-5-1998
| 碳钢和不锈钢制紧固件的机械性能.第5部分:不处在拉伸应力下的固定螺钉和类似螺纹紧固件
| (Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fasteners not under tensile stresses.)
|
| NF E25-100-6-1998
| 不锈钢紧固件耐腐蚀的机械特性.螺栓,螺丝和双端螺栓
| (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.)
|
| NF E25-100-8-1998
| 不锈钢紧固件耐腐蚀的机械特性.不低于拉伸应力下配套螺钉和类似紧固件
| (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.)
|
| NF E25-119-2-1994
| 十字槽沉头螺钉(一般头形).等级A.第2部分:8.8类特性钢,不锈钢和有色金属
| (Cross recessed countersunk flat head scews (common head style). Grade A. Part 2 : steel of property class 8.8, stainless steel and non-ferrous metals.)
|
| NF E25-400-6-1998
| 不锈钢耐腐蚀机械特性.螺母
| (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 2 : nuts.)
|
| NF E25-651-2003
| 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉
| (Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4 : tapping screws.)
|
| NF E25-755-1997
| 非硬度钢和奥斯特不锈钢的内螺纹平行螺钉
| (Parallel pins with internal thread, of unhardened steel and austenitic stainless steel.)
|
| NF E25-756-1997
| 金属不锈钢和硬化钢的平行螺钉
| (Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).)
|
| NF E25-757-1997
| 非硬度钢和奥斯特不锈钢的内螺纹平行螺钉
| (Parallel pins with internal thread, of hardened steel and martensitic stainless steel.)
|
| NF E26-020-1975
| 未校准未试验过的焊接圆钢环链
| (Welded link chain round steel non calibrated non tested.)
|
| NF E29-251-1972
| 工业管道.不锈钢制焊接冲压凸缘（薄型系列）.公称压力１０
| (STAMPED STAINLESS-STEEL FILLETS FOR WELDING (THIN SERIES) PN 10)
|
| NF E29-736-2-2003
| 可运输的气瓶.可再充气的焊接钢气瓶.设计和制造.第2部分:不锈钢
| (Transportable gas cylinders - Reffilable welded steel gas cylinders - Design and construction - Part 2 : stainless steel.)
|
| NF E29-833-1979
| 管道.双咬边金属软管.(石棉垫片，密封，圆截面，奥氏体不锈钢制)
| (PIPEWORKS. FLEXIBLE METAL HOSES DOUBLE INTERLOCK,ASBESTOS PACKING,PRESSURE-TIGHT,CIRCULAR SECTION,IN AUSTENITIC STAINLESS STEEL.)
|
| NF E32-116-2003
| 不锈钢外壳的锅炉
| (Stainless steel shell boilers.)
|
| NF F80-101-1988
| 铁路车辆.F ８０钢铁产品和半成品制造铁路车辆推荐使用的钢材.I·一般规定
| (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. I. COMMON REQUIREMENTS.)
|
| NF F80-101-1988
| 铁路车辆.F ８０钢铁产品和半成品制造铁路车辆推荐使用的钢材.I·一般规定
| (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. I. COMMON REQUIREMENTS.)
|
| NF F80-102-1988
| 铁路车辆.制造铁路车辆推荐使用的钢材.II.一般用结构钢
| (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. II. STRUCTURAL STEELS FOR GENERAL PURPOSES.)
|
| NF F80-103-1989
| 铁路车辆.铁路车辆制造推荐使用的钢材.Ⅲ.抗大气腐蚀的结构钢材
| (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. III. STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE. COPPER STEELS.)
|
| NF F80-104-1981
| 铁路运输设备.制造铁路车辆推荐使用的钢材.IV. 制造高张力机具和压缩气贮器的碳钢和锰碳钢
| (RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS FOR RAILWAY ROLLING-STOCK CONSTRUCTION. IV : STEELS FOR PLATES FOR PRESSURE VESSELS AND HIGHLY STRESSED PARTS.)
|
| NF F80-105-1982
| 铁路运输设备.制造铁路车辆推荐使用的钢材.V.适于热处理的锻制非合金钢
| (Railway transport equipment. Recommended steels for railway rolling-stock construction. V : unalloyed forging steels suitable for heat treatment.)
|
| NF F80-106-1986
| 铁路车辆.制造铁路车辆推荐使用的钢材.VI. 冷加工钢材
| (Rolling stock. Recommended steels for rolling stock construction. VI cold forming steels.)
|
| NF F80-107-1984
| 铁路车辆.制造铁路车辆推荐使用的钢材.VII.热处理非合金钢和特种合金钢
| (Rolling stock. Recommended steels for stock construction. VII unalloyed and alloy heat treated steels.)
|
| NF F80-108-1980
| 铁路运输设备.制造铁路车辆推荐使用的钢材.VIII. 弹簧钢
| (RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS FOR RAILWAY ROLLING-STOCK CONSTRUCTION. VIII : SPRING STEELS.)
|
| NF F80-109-1984
| 铁路车辆.制造铁路车辆推荐使用的钢材.IY. 一般不锈钢
| (Rolling stock. Recommanded steels for rolling stock construction. IX stainless steels for general purposes.)
|
| NF F80-109-1984
| 铁路车辆.制造铁路车辆推荐使用的钢材.IY. 一般不锈钢
| (Rolling stock. Recommanded steels for rolling stock construction. IX stainless steels for general purposes.)
|
| NF J33-372-1987
| 游艇.不锈钢缆用拉紧装置和活动缆的固定接头.尺寸
| (Small craft. Rigging screws for stainless steel wire rope. Principal dimensions for forks, connection pins and eye-holes.)
|
| NF J37-310-1946
| 造船工业.锚链.普通锚链环圆钢口径
| (SHIPBUILDING. ANCHOR CABLES. ROUND BARS FOR COMMON LINKS.)
|
| NF J37-311-1946
| 造船工业.锚链.大链环和末端环圆钢口径
| (SHIPBUILDING. ANCHOR CABLES. ROUND BARS FOR ENLARGED AND END LINKS.)
|
| NF L12-005-2002
| 航空航天系列.热轧圆钢棒.标称公差.直径D≤6mm 至 D≤250mm.尺寸
| (Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm inferior or equal to D inferior or equal to 250 mm - Dimensions.)
|
| NF L12-610-1968
| 耐热钢和钢合金半成品冷拉无缝圆钢管.航空和航天工业选用
| (SELECTION OF COLD DRAWN SEAMLESS STEEL TUBES OF CIRCULAR CROSS-SECTION FOR THE AEROSPACE INDUSTRY.)
|
| NF L16-004-1991
| 航空航天系列.涂料和清漆.不锈钢试件表面的性质和准备方法
| (AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN CORROSION RESISTING STEEL.)
|
| NF L21-106-1975
| 铆钉用铝合金、钢、耐热不锈钢合金线材.尺寸
| (Wires for rivets in aluminium alloys, steel, stainless and heat resisting alloys. Dimensions.)
|
| NF L21-203-1974
| 钢铆钉.不锈钢和耐热合金铆钉.技术规范
| (STEEL RIVETS. STAINLESS AND HEAT-RESISTING ALLOY RIVETS. TECHNICAL SPECIFICATION.)
|
| NF L22-517-1980
| E-26 NCT 25 不锈钢制内紧锁十二角头螺母.ISO螺纹
| (12 point self-locking flange nuts, in E-Z 6 nct 25 corrosion resisting steel. ISO thread.)
|
| NF L22-526-1980
| E-２６NCT２５不锈钢内锁紧十二角头螺毋.MJ 螺纹
| (12 POINT SELF-LOCKING FLANGE NUTS IN E-Z 6 NCT 25 CORROSION RESISTING STEEL. MJ THREAD.)
|
| NF L22-531-1977
| E-２６NCT２５不锈钢制内锁紧嵌入螺母.ISO螺纹
| (SELF-LOCKING CLINCH NUTS,IN E-Z 6 NCT 25 CORROSION RESISTING STEEL. ISO THREAD.)
|
| NF L22-588-2000
| 航空用螺栓和螺母.镀银不锈钢制深槽单耳内锁紧系留螺母.ISO M或ISO MJ螺纹.分类:1100 MPa/425度(室温下)
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper)
|
| NF L31-209-1973
| 机身用轴承.不锈钢制弯管用单排滚珠刚性轴承.尺寸和负荷
| (AIRFRAME BEARINGS,SINGLE ROW. RIGID TORQUE TUBE BALL BEARINGS. CORROSION-RESISTING STEEL. DIMENSIONS AND LOADS.)
|
| NF L31-215-1973
| 机身用轴承.不锈钢制单排滚珠刚性轴承.尺寸和负荷
| (AIRFRAME BEARINGS,SINGLE ROW. RIGID BALL BEARINGS. CORROSION-RESISTING STEEL. DIMENSIONS AND LOADS.)
|
| NF L31-223-1973
| 机身用轴承.不锈钢制双排球面轴承.尺寸和负荷
| (AIRFRAME BEARINGS,DOUBLE ROW. SELF ALIGNING BALL BEARINGS. CORROSION-RESISTING STEEL. DIMENSIONS AND LOADS.)
|
| NF L31-227-1973
| 机身用轴承.不锈钢制单排球面滚珠轴承.尺寸和负荷
| (AIRFRAME BEARINGS,SINGLE ROW. SELF ALIGNING ROLLER BEARINGS. CORROSION-RESISTING STEEL. DIMENSIONS AND LOADS.)
|
| NF L43-611-1977
| 不锈钢制钎接带法兰的直接头
| (FLANGED STRAIGHT UNIONS,SOLDER TYPE,STAINLESS STEEL.)
|
| NF M81-636-1986
| 煤矿器材.经链板输送机用高抗拉强度圆钢丝链环的校准链.规范.验收条件
| (Mining equipment. High tensile steel chains round link for chain conveyors and coal plough. Specifications. Acceptance testing.) |
| NF M81-637-1986
| 煤矿器材.经通用连接链环用圆钢丝校准链
| (MINING EQUIPMENT. ROUND LINK TYPE CHAIN UNIVERSEL CONNECTORS FOR CALIBRATED CHAINS. SPECIFICATIONS. ACCEPTANCE TESTING.)
|
| NF M81-801-1980
| 提升用圆钢丝缆.术语和定义
| (CIRCULAR METAL WIRE ROPES FOR HOISTING. VOCABULARY.)
|
| NF M81-808-1966
| 采矿设备.提升用圆钢丝缆.三角式6股线芯型
| (MINING EQUIPMENT. CIRCULAR WIRE ROPES FOR HOISTING. 6 TRIANGULAR STRAND TYPES ON CENTRAL TEXTILE CORE.)
|
| NF P16-326-1-1999
| 废水系统用带套管的纵向焊接不锈钢管的管和配件.第1部分:要求、试验和质量控制
| (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.)
|
| NF P16-326-2-1999
| 废水系统用带套管的纵向焊接不锈钢管的管和配件.第2部分:系统S.尺寸
| (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 2 : systems S. Dimensions.)
|
| NF P16-326-3-1999
| 废水系统用带套管的纵向焊接不锈钢管的管和配件.第2部分:系统X.尺寸
| (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 3 : system X. Dimensions.)
|
| NF P34-303-2000
| 金属薄板制屋面制品.不锈钢薄板制成的全支撑屋面制品的规范
| (Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet.)
|
| NF P34-309-1-2000
| 金属片屋顶产品.钢铝或不锈钢片的自支持产品规范.第1部分:钢
| (Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1 : steel.)
|
| NF P34-309-2-2000
| 金属片屋顶产品.钢铝或不锈钢片的自支持产品规范.第2部分:铝
| (Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2 : aluminium.)
|
| NF P34-309-3-2000
| 金属片屋顶产品.钢铝或不锈钢片的自支持产品规范.第3部分:不锈钢
| (Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3 : stainless steel.)
|
| NF S90-361-1990
| 外科医疗器械.钉子.股骨最高端用的不锈钢片
| (MEDICO-SURGICAL EQUIPMENT. ROUGH-SURFACED STAINLESS STEEL NAIL PLATES FOR THE UPPER END OF THE THIGHBONE. MATERIALS AND DIMENSIONS.)
|
| NF S90-414-1988
| 外科医疗器械.外科植入物.不对称螺纹和球形底座接骨用不锈钢螺丝.机械性能和试验
| (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. STAINLESS STEEL OSTEOSYNTHESIS SCREW WITH ASYMMETRICAL THREAD AND SPHERICAL FITTING. MECHANICAL REQUIREMENTS AND TESTING.)
|
| NF S90-426-1988
| 外科医疗器械.外科植入物.不锈钢粗糙面骨干板.尺寸和表面特性
| (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. ROUGH SURFACE DIAPHYSIS PLATES MADE OF STAINLESS STEEL. DIMENSIONAL AND SURFACE CHARACTERISTICS.)
|
| NF S90-427-1990
| 外科医疗器械.脊椎用接骨器材.不锈钢制或钴基合金制脊椎板.A系统.尺寸与几何形状
| (MEDICO-SURGICAL EQUIPMENT. OSTEOSYNTHESIS EQUIPMENT FOR THE RACHIS. FORGED STAINLESS STELL OR COBALT ALLOY RACHIS PLATES. SYSTEM A. DIMENSIONS AND GEOMETRY.)
|
| NF S90-450-1981
| 外科器械.止血钳.不锈钢.化学成分和硬度
| (Surgical instruments. Haemostatic forceps. Stainless steel. Chemical composition and hardness.)
|
| NF S93-004-1995
| 医疗器件制造用不锈钢针头管材
| (STAINLESS STEEL NEEDLE TUBING FOR THE MANUFACTURE O FMEDICAL DEVICES. (EUROPEAN STANDARD EN ISO 9626).)
|
| NF S93-004/A1-2001
| 医疗装置生产用不锈钢针管
| (Stainless steel needle tubing for the manufacture of medical devices.)
|
| NF S94-051-2000
| 外科植入物.金属材料.锻造不锈钢
| (Implants for surgery - Metallic materials - Wrought stainless steel.)
|
| NF S94-059-1997
| 外科植入物.金属材料.可锻高氮不锈钢
| (Implants for surgery. Metallic materials. Wrought high nitrogen stainless steel.)
|
| NF S94-090-2001
| 医疗外科设备.骨外科辅助定位装置用材料.马氏体不锈钢、弥散硬化不锈钢、奥氏体不锈钢和奥氏铁素体不锈钢
| (Medico-surgical equipment - Materials for ancillary positioning instruments for bone surgery - Martensitic, precipitation hardening, austenitic and austeno-ferritic stainless steels.)
|
| NF S94-471-2000
| 外科设备.金属材料.第1部分:不锈钢
| (Surgical instruments - Metallic materials - Part 1 : stainless steel.)
|
| NF T35-505-4-1997
| 涂料和相关产品应用前钢铁衬底的准备.金属喷砂清理磨损的规范.第4部分:低碳铸钢的喷射(EN ISO 11124-4)
| (Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 4 : low-carbon cast-steel shot.)
|
| NF X08-104-1987
| 颜色.钢铁工厂.管道系统的标记
| (Colours. Iron and stellfactories. Marking of fluids in pipes.)
|
| NF X11-510-1988
| 筛和筛分.工业用退火圆钢丝制方孔金属筛.钢丝直径
| (SIEVES AND SIEVING. WIRE GAUZE WITH SQUARE APERTURES MADE FROM ANNEALED ROUND WIRE FOR INDUSTRIAL USE. WIRE DIAMETERS.)
|
| 编号 | 中文名称 | 英文名称 |
|---|