| 序号 | 编号 | 中文名称 | 英文名称 |
|---|---|---|---|
| 1 | GB/T 11699-2003 | 舷内机小艇锥度为1∶10的螺旋桨轴端和桨毂 | Small craft with inboard engine--Propeller shaft ends and bosses with 1∶10 taper |
| 2 | GB/T 12916-1991 | 船用金属螺旋桨技术条件 | Specification for marine metallic propeller |
| 3 | GB/T 19309-2003 | 舷内机小艇锥度为1∶16的螺旋桨轴端和桨毂 | Small craft with inboard engine--Propeller shaft ends and bosses with 1∶16 taper |
| 4 | GB/T 13411-1992 | 船用可调螺距螺旋桨技术条件 | Technical requirements for marine controllable pitch propellers |
| 5 | NF J65-505-2-2003 | 船舶和海运技术.船用推进装置.第2部分:可变桨矩的螺旋桨装置词汇 | (Ships and marine technology - Propulsion plants for ships - Part 2 : vocabulary for controllable-pitch propeller plants.) |
| 6 | NF L87-121-1966 | 螺旋桨.互换性 | (PROPELLER HUBS. INTERCHANGEABILITY CHARACTERISTICS.) |
| 7 | NF J65-120-1958 | 造船工业.轴线.螺旋桨螺母制动原则 | (SHIPBUILDING. SHAFT LINES. PRINCIPLES FOR LOCKING OF PROPELLER NUTS.) |
| 8 | NF J65-113-1958 | 造船工业.轴线.螺旋桨用圆螺母 | (SHIPBUILDING. SHAFT LINES. GROOVED PROPELLER NUTS.) |
| 9 | NF J65-115-1958 | 造船工业.轴线.螺旋桨用螺母盖 | (SHIPBUILDING. SHAFT LINES. COMBINED NUTS AND SPINNERS.) |
| 10 | NF L87-110-1966 | 普通螺旋桨轴.组装和标称尺寸 | (PLAIN PROPELLER SHAFT. ASSEMBLY AND NOMINAL DIMENSIONS.) |
| 11 | NF J65-109-1958 | 造船工业.轴线.螺旋桨用带座螺母 | (SHIPBUILDING. SHAFT LINES. COLLAR NUTS FOR PROPELLERS.) |
| 12 | NF J65-125-1958 | 造船工业.轴线.螺旋桨轴套前端的油封 | (SHIPBUILDING. SHAFT LINES. FORWARD GLANDS FOR PROPELLER HUPS.) |
| 13 | NF J65-111-1958 | 造船工业.轴线.螺旋桨用普通螺母和带四个榫头的罩形螺母 | (SHIPBUILDING. SHAFT LINES. ORDINARY AND CAP PROPELLER NUTS WITH 4 LUGS.) |
| 14 | NF L87-120-1966 | 普通螺旋桨轴.互换性 | (PLAIN PROPELLER SHAFT. INTERCHANGEABILITY CHARACTERISTICS.) |
| 15 | NF L87-123-1955 | 螺旋桨.尾锥 | (PROPELLER HUBS. REAR CONES.) |
| 16 | NF L87-125-1955 | 螺旋桨.紧固螺母 | (PROPELLER HUBS. LOCKNUTS.) |
| 17 | NF J65-505-1967 | 造船工业.内河航行.船用螺旋桨.定义 | (SHIPBUILDING. INLAND NAVIGATION. SHIPS SCREW PROPELLERS. DEFINITIONS.) |
| 18 | NF L87-122-1955 | 螺旋桨.头锥 | (PROPELLER HUBS. FRONT CONES.) |
| 19 | QB/T 1069-1991 | 螺旋桨搅拌机 | () |
| 20 | HG/T 3796.9-2005 | 板式螺旋桨搅拌器 | () |
| 21 | ISO 484-1-1981 | 造船 船用螺旋桨 制造公差 第1部分:螺旋桨直径>2.5m | Shipbuilding; Ship screw propellers; Manufacturing tolerances; Part 1 : Propellers of diameter greater than 2,50 m |
| 22 | ISO 484-2-1981 | 造船 船用螺旋桨 制造公差 第2部分:螺旋桨直径0.80m～2.50m(包括2.50m) | Shipbuilding; Ship screw propellers; Manufacturing tolerances; Part 2 : Propellers of diameter between 0,80 and 2,50 m inclusive |
| 23 | ANSI/ASHRAE 87.3P-2001 | 螺旋桨通风机风扇振动试验方法.诊断试验方法 | Method of Testing Propeller Fan Vibration - Diagnostic Test Methods |
| 24 | ANSI/ASHRAE 87.2-2002 | 检测螺旋桨式风机可靠性的现场试验法 | In-Situ Method of Testing Propeller Fans for Reliability |
| 25 | ASTM D 5096-2002 | 测定杯形风速计或螺旋桨风速计性能的标准试验方法 | Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer |
| 26 | BS MA 86-1979 | 船舶制造用术语词汇.船舶用螺旋桨对等术语词汇表 | Glossary of terms used in shipbuilding: list of equivalent terms for ship screw propellers |
| 27 | BS 7161-1990 | 内列发动机船舶的螺旋浆轴端和螺旋桨毂规范 | Specification for propeller shaft ends and bosses for inboard-engined pleasure craft |
| 28 | BS EN ISO 3715-2-2001 | 船舶和海上技术.船用推进装置.可变距螺旋桨设备词汇 | Ships and marine technology - Propulsion plants for ships - Vocabulary for controllable-pitch propeller plants |
| 29 | ISO 8845 Technical Corrigendum 1-1995 | 舷内机小艇 带1:16锥度的螺旋桨轴端和轴毂 技术勘误1 | Small craft with inboard engine - Propeller shaft ends and bosses with 1:16 taper; Technical Corrigendum 1 |
| 30 | ISO 3715-1978 | 造船 船用螺旋桨 术语对照表 三种语言版 | Shipbuilding; Ship screw propellers; List of equivalent terms Trilingual edition |
| 31 | ISO 3715 AMD 1-1986 | 造船 船用螺旋桨 术语对照表 修改1 三种语言版 | Shipbuilding; ship screw propellers; list of equivalent terms; amendment 1 |
| 32 | ISO 8845-1994 | 舷内机小艇 带1:16锥度的螺旋桨轴端和轴毂 | Small craft with inboard engine - Propeller shaft ends and bosses with 1:16 taper |
| 33 | JIS W4606-1995 | 飞行器涡轮轴和涡轮螺旋桨发动机通用规范 航空ターボシャフトエンジン及びターボプロップエンジン通則 | General specification of turboshaft and turboprop engines for aircraft |
| 34 | JIS F4804-1999 | 船用小型螺旋桨的固定部件.锥度为1:16 船用小形プロペラ取付部 テーパ１：１６ | Fixing parts of ships' small propellers, Taper 1:16 |
| 35 | JIS F4803-1999 | 造船.船用螺旋桨.制造公差.第2部分:直径在0.8至2.5M之间含0.8M、2.5M的螺旋桨 造船 ― 船用プロペラ ― 製作許容差 ― 第２部：直径０．８ｍ以上２．５ｍ以下のプロペラ | Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 2: Propellers of diameter between 0.80 and 2.50 m inclusive |
| 36 | JIS F4802-1999 | 造船.船用螺旋桨.制造公差.第1部分:直径大于2.5M的螺旋桨 造船 ― 船用プロペラ ― 製作許容差 ― 第１部：直径２．５ｍを超えるプロペラ | Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 1: Propellers of diameter greater than 2.50 m |
| 37 | JIS F4801-1999 | 船用小型螺旋桨的固定部件.锥度1:10 船用小形プロペラ取付部 テーパ１：１０ | Fixing parts of ships' small propellers, Taper 1:10 |
| 序号 | 编号 | 中文名称 日本語標題 | 英文名称 |