编号 | 中文名称 | 英文名称 |
ANSI/AIHA Z9.4-1997
| 排风系统.喷砂操作.固定位置通风和安全实施规程
| Exhaust Systems - Abrasive Blasting Operations - Ventilation and Safe Practices for Fixed Location Enclosures
|
ASTM C 418-2005
| 用喷砂法测定混凝土抗磨性的标准试验方法
| Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
|
ASTM D 4417-2003
| 喷砂清理钢表面轮廓现场测量的标准试验方法
| Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
|
ASTM D 4940-1998
| 喷砂磨料水溶解离子污染导电分析的标准试验方法
| Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
|
ASTM D 7055-2004
| 涂层试验用热轧碳钢薄板准备(喷砂清理)的标准规程
| Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
|
ASTM D 7127-2005
| 便携式记录仪器测量喷砂清理过的金属表面粗糙度的标准试验方法
| Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
|
BS 2634-2-1987
| 表面粗糙度比对试样.第2部分:电火花加工、喷丸处理、喷砂处理及抛光试样规范
| Roughness comparison specimens - Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens
|
BS 7079-F10-2000
| 涂料和相关制品使用前钢底衬材料的制备.非金属喷砂清理磨料.铁铝榴石
| Preparation of steel substrates before application of paints and related products - Non-metallic blast-cleaning abrasives - Almandite garnet
|
BS EN 10238-1997
| 自动喷砂清理和自动涂底漆的结构钢制品
| Automatically blast cleaned and automatically primed structural steel products
|
BS EN 2497-1990
| 钛与钛合金干喷砂规范
| Specification for dry abrasive blasting of titanium and titanium alloys
|
BS EN ISO 11126-1-1997
| 涂料和其它相关产品应用前钢底基的预处理.非金属喷砂清理磨料规范.概述和分类
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - General introduction and classification
|
BS EN ISO 11126-4-1994
| 涂料和其它相关产品应用前钢基体的预处理.非金属喷砂清理磨料规范.煤炉熔渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Coal furnace slag
|
BS EN ISO 11126-5-1994
| 涂料和其他相关产品应用前钢基体的预处理.非金属喷砂清理磨料规范.镍精练厂矿渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Nickel refinery slag
|
BS EN ISO 11126-7-1996
| 涂料和相关制品使用前钢衬底的制备.非金属喷砂清理磨料的规范.熔融氧化铝规范
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Specification for fused aluminium oxide
|
BS EN ISO 11127-4-1994
| 涂料和相关产品应用前钢基体的预处理. 非金属喷砂清理磨料试验方法.用玻璃划痕试验评估硬度
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Assessment of hardness by a glass slide test
|
BS EN ISO 11127-5-1994
| 涂料和相关产品应用前钢基体的预处理. 非金属喷砂清理磨料试验方法.湿度的测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of moisture
|
BS EN ISO 11127-6-1994
| 涂料和相关产品应用前钢基体的预处理. 非金属喷砂清理磨料试验方法.用电导性测量测定水溶性杂质
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of water-soluble contaminants by conductivity measurement
|
BS EN ISO 11127-7-1994
| 涂料和相关产品应用前钢基体的预处理. 非金属喷砂清理磨料试验方法.水溶性氯化物的测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of water-soluble chlorides
|
BS EN ISO 3861-1996
| 喷砂用橡胶软管.规范
| Rubber hoses for sand and grit blasting - Specification
|
BS EN ISO 8503-2-1989
| 涂料和有关产品使用前的钢基体的准备.喷丸处理钢基体的表面粗糙度.喷砂处理钢表面轮廓的定级方法.比较方法
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
|
BS EN ISO 8504-2-2000
| 涂料和有关产品使用前钢衬底的制备.表面制备方法.磨料喷砂清理
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Abrasive blast cleaning - Part 2: Abrasive blast cleaning
|
DIN 50315-1988
| 用离心喷砂法试验金属磨料的磨损情况和效果
| Testing the wear and effectiveness of metallic abrasives by centrifugal blasting
|
DIN 8589-12-2003
| 排屑加工工艺.第12部分:砂带磨削(喷砂清理).分类、细分类、术语和定义
| Manufacturing processes chip removal - Part 12: Belt grinding (sanding); Classification, subdivision, terms and definitions
|
DIN EN 12373-10-1999
| 铝和铝合金.阳极处理.第10部分:用喷砂试验测量阳极化氧化涂层的特定平均耐磨性能
| Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN 12373-10:1998
|
DIN EN 1248-2002
| 铸造机械.喷砂设备的安全要求; 德文版本 EN 1248:2001
| Foundry machinery - Safety requirements for abrasive blasting equipment; German version EN 1248:2001
|
DIN EN 2497-1989
| 航空航天.钛和钛合金的干喷砂处理
| Aerospace series; dry abrasive blasting of titanium and titanium alloys; german version EN 2497:1989
|
DIN EN ISO 11126-10-2005
| 涂装油漆和有关产品前钢材预处理.非金属喷砂清理磨料的规范.第10部分:铁铝石榴石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000); German version EN ISO 11126-10:2004
|
DIN EN ISO 11126-9-2005
| 涂装油漆和有关产品前钢材预处理.非金属喷砂清理磨料的规范.第9部分:十字石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004
|
DIN EN ISO 14877-2003
| 粒状磨料喷砂操作防护服
| Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002); German version EN ISO 14877:2002
|
DIN EN ISO 3861-1997
| 喷砂橡胶软管.规范
| Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995); German version EN ISO 3861:1997
|
DIN EN ISO 8503-1-1995
| 涂料和相关产品使用前的钢基体的制备.喷丸处理钢基体的表面粗糙度特性.第1部分:ISO表面轮廓比较仪的规范和
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:1988); German version EN ISO 8503-1:1995
|
DIN EN ISO 8503-2-1995
| 涂料和相关产品使用前的钢基体的制备.喷丸处理钢基体的表面粗糙度特性.第2部分:喷砂处理表面的定级方法.比
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure (ISO 8503-2:1988); German version EN ISO 8503-2:1995
|
DIN EN ISO 8503-5-2005
| 涂装油漆和有关产品前钢材预处理.喷砂清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2003); German version EN ISO 8503-5:2004
|
DIN EN ISO 8504-2-2002
| 使用涂料和相关产品前钢基材准备.表面准备方法.第2部分:喷砂清洁
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000); German version EN ISO 8504-2:2001
|
EN 10238-1996
| 自动喷砂清理和自动涂底漆结构钢制品
| Automatically blast-cleaned and automatically prefabrication primed structural steel products
|
EN 1248-2001
| 铸造机械 喷砂设备的安全要求
| Foundry machinery - Safety requirements for abrasive blasting equipment
|
EN 2497-1989
| 航空航天系列 钛与钛合金干喷砂
| Aerospace series - Dry abrasive blasting of titanium and titanium alloys
|
EN 271-1995+A1-2000+AC1997
| 呼吸保护装置 用于喷砂操作的包括护罩的压缩空气导管呼吸器或动力推动新鲜空气软管呼吸器 要求、测试、标
| Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking
|
EN ISO 3861-1997
| 喷砂用橡胶软管 规范
| Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995)
|
EN ISO 8501-1 Supplement-2001
| 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分的补充信息:用不同磨料喷砂处理时钢表面
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast
|
GB/T 2490-2003
| 普通磨具喷砂硬度机检验硬度的方法
| Bonded abrasive products--Hardness grade measurement by sand blasting
|
GB/T 6060.5-1988
| 表面粗糙度比较样块抛(喷)丸、喷砂加工表面
| Roughness comparison specimens--Shot-blasted and grit-blasted surfaces
|
HG/T 2192-1991
| 喷砂橡胶软管
| ()
|
ISO 14877-2002
| 用粒状磨料进行喷砂操作用防护服
| Protective clothing for abrasive blasting operations using granular abrasives
|
ISO 3861-2005
| 喷砂清理用橡胶软管.规范
| Rubber hoses for sand and grit blasting - Specification
|
ISO 8252-1987
| 阳极氧化铝和铝合金 用喷砂摩擦试验仪测定阳极氧化膜的平均耐磨系数
| Anodized aluminium and aluminium alloys; Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
|
ISO 8501-1 Supplement-1994
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第1部分的补充信息:用不同磨料喷砂处理时钢表面变
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives
|
JB/T 10349-2002
| 干式喷砂机
| ()
|
JB/T 10350-2002
| 液体喷砂机
| ()
|
JIS Z0310-2004
| 表面制备用喷砂清洁法
| Abrasive blast-cleaning methods for surface preparation
|
JIS Z0311-2004
| 金属喷砂清洗磨料
| Metallic blast-cleaning abrasives
|
JIS Z0312-2004
| 非金属喷砂清洗磨料
| Non-metallic blast-cleaning abrasives
|
JIS Z0313-2004
| 涂装油漆前喷砂清理衬底的评定和试验
| Test and assessment of abrasive blast-cleaned substrates before application of paints
|
NF A35-511-1996
| 自动化喷砂清理和自动化预制优质钢产品(欧洲标准EN 10238)
| (Automatically blast-cleaned and automatically prefabrication primed structural steel products.)
|
NF C75-304-1997
| 手提式电动工具安全性.第2-4部分:喷砂机的特殊要求
| (Safety of hand-held electric motor operated tools. Part 2-4 : particular requirements for sanders.)
|
NF E63-703-2002
| 铸造机械.喷砂设备的安全要求
| (Foundry Machinery - Safety requirements for abrasive blasting equipment.)
|
NF S76-039-1995
| 呼吸保护设备.喷砂操作用的空气管线性呼吸仪的要求、检验、标记
| (Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing marking.)
|
NF T35-501-1-2001
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第1部分:未涂覆钢衬底和已有覆层全部除去后钢衬底
| ()
|
NF T35-503-1-1995
| 涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第一部分:喷砂处理表面的ISO评定比较样板
| ()
|
NF T35-503-2-1995
| 涂料和有关产品使用前的钢衬底的制备. 喷丸处理钢基体的表面粗糙度.第二部分:喷砂处理表面的定级方法.比较
| ()
|
NF T35-504-2-2001
| 涂料和有关产品使用前钢衬底的制备.表面制备方法.第2部分:喷砂清理
| (Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2 : abrasive blast-cleaning.)
|
NF T35-505-4-1997
| 涂料和相关产品应用前钢铁衬底的准备.金属喷砂清理磨损的规范.第4部分:低碳铸钢的喷射(EN ISO 11124-4)
| (Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 4 : low-carbon cast-steel shot.)
|
NF T35-505-7-1999
| 涂料和相关制品使用前钢衬底的制备.非金属喷砂清理磨料的规范.第7部分:熔融氧化铝
| (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 7 : FUSED ALUMINIUM OXIDE. (EUROPEAN STANDARD EN ISO 11126-7).)
|
NF T35-507-6-1997
| 涂料和相关产品应用前钢衬垫的制备.金属喷砂清洗粘结剂的试验方法.第6部分:外来物质的测定(EN ISO 11125-6)
| (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 6 : DETERMINATION OF FOREIGN MATTER. (EUROPEAN STANDARD EN ISO 11125-6).)
|
NF T35-507-7-1997
| 涂料和相关产品应用前钢衬垫的制备.金属喷砂清洗粘结剂的试验方法.第7部分:湿度的测定(EN ISO 11125-7)
| (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 7 : DETERMINATION OF MOISTURE. (EUROPEAN STANDARD EN ISO 11125-7).)
|
NF T35-508-4-1998
| 涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料的规范 第4部分:煤炉炉渣(EN ISO 11126-4)
| (Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 4 : coal furnace slag.)
|
NF T35-508-8-1997
| 涂料及相关产品应用前钢衬垫的制备.非金属喷砂清理磨料规范.第8部分:橄榄砂(EN ISO 11126-8)
| (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 8 : OLIVINE SAND. (EUROPEAN STANDARD EN ISO 11126-8).)
|
NF T35-509-1-1997
| 涂料及相关产品应用前钢衬垫的制备.非金属喷砂清理磨料试验方法.第1部分:抽样(EN ISO 11127-1)
| (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 1 : SAMPLING. (EUROPEAN STANDARD EN ISO 11127-1).)
|
NF T35-509-4-1997
| 涂料及相关产品应用前钢衬垫的制备.非金属喷砂清理磨料试验方法.第4部分:玻璃载片试验评估硬度(EN ISO 1112
| (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 4 : ASSESSMENT OF HARDNESS BY A GLASS SLIDE TEST. (EUROPEAN STANDARD EN ISO 11127-4).)
|
NF T35-509-5-1997
| 涂料及相关产品应用前钢衬垫的制备.非金属喷砂清理磨料试验方法.第5部分:湿度测定(EN ISO 11127-5)
| (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 5 : DETERMINATION OF MOISTURE. (EUROPEAN STANDARD EN ISO 11127-5).)
|
NF T35-509-6-1997
| 涂料及相关产品应用前钢衬垫的制备.非金属喷砂清理磨料试验方法.第6部分:导电率测定水溶性污染物(EN ISO 11
| (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 6 : DETERMINATION OF WATER-SOLUBLE CONTAMINANTS BY CONDUCTIVITY MEASUREMENT. (EUROPEAN STANDARD EN ISO 11127-6))
|
编号 | 中文名称 | 英文名称 |