| 序号 | 编号 | 中文名称 | 英文名称 |
|---|
| 1 | GB/T 12301-1999 | 船舱内非危险货物产生有害气体的检测方法 | Detection methods for harmful gas evolved from non-dangerous cargo in holds |
| 2 | NF J95-031-1997 | 小型船舶.汽油发动机和/或汽油罐防水船舱的通风 | (Small craft. Ventilation of petrol engine and/or petrol tank compartments.) |
| 3 | ANSI/ASTM F2133-2001 | 钢制船舱壁和甲板上大碳氢化合物池着火效应测定方法 | Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Marine Bulkheads and Decks, Constructed of Steel |
| 4 | DIN 81401-1978 | 船舱门用的可拆开的连接铰链和折页.用于螺接 | Loose joints butts and hinges for ship's cabin doors; for screwing-on |
| 5 | DIN 81402-1978 | 螺钉安装的船舱门用铰链 | Hinges for ship's cabinet doors, for screwing-on |
| 6 | ASTM F 841-1984 | 永久性安装在船舱中的隧道顶推装置 | Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels |
| 7 | ASTM F 2133-2001 | 测定钢结构的绝缘船舱壁和甲板的防火效果的标准试验方法 | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Insulated Marine Bulkheads and Decks, Constructed of Steel |
| 8 | BS MA 75-2-1978 | 船舱壁板及水槽垫规范.第2部分:可锻铸铁船舱壁板(球墨铸铁) | Specification for bulkhead pieces and tank pads - Bulkhead pieces of ductile iron (spheroidal graphite iron) |
| 9 | BS MA 75-1-1985 | 船舱壁板及水槽垫规范.第1部分:组合式钢制或铜合金制船舱壁板和钢垫片 | Specification for bulkhead pieces and tank pads - Bulkhead pieces of fabricated steel or copper alloy and steel pad pieces |
| 10 | BS EN ISO 11105-1997 | 小艇.汽油发动机和/或汽油罐防水船舱的通风 | Small craft - Ventilation of petrol engine and/or petrol tank compartments |
| 11 | DIN EN 624-2001 | 液化石油汽器具专用规范.车船舱室密封液化石油汽加热设备 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats; German version EN 624:2000 |
| 12 | DIN ISO 2923-2003 | 声学.船舱噪声测量 | Acoustics - Measurement of noise on board vessels (ISO 2923:1996 + Corrigendum 1:1997) |
| 13 | ISO 9382-1990 | 船载驳 全系列 分类和主要要求 | Shipborne barges, all series; classification and main requirements |
| 14 | ISO 9711-1-1990 | 集装箱 与船载集装箱有关的信息 第1部分:箱位坐标 | Freight containers; information related to containers on board vessels; part 1: bay plan system |
| 15 | BS ISO 9711-2-1995 | 货运集装箱.船载集装箱的有关资料.电传数据传输 | Freight containers - Information related to containers on board vessels - Telex data transmission |
| 16 | BS ISO 9711-1-1995 | 货运集装箱.船载集装箱的有关资料.间档设计系统 | Freight containers - Information related to containers on board vessels - Bay plan system |
| 17 | BS MA 105-2-1987 | 系列3船载驳船.第2部分:主要操作和技术要求规范 | Series 3 shipborne barges - Specification for main operational and technical requirements |
| 18 | BS EN 61996-2001 | 船舶导航和无线电通信设备和系统.船载航行数据记录器.性能要求.试验方法和规定的试验结果 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results |
| 19 | BS EN 61993-1-2001 | 海上导航与无线电通信设备和系统.用VHF数字选择呼叫(DSC)技术的船载应答器系统装置.操作和性能要求，试验方 | Maritime navigation and radiocommunication equipment and systems - Shipborne automatic transponder system installation using VHF digital selective calling (DSC) techniques - Operational and performance requirements, methods of testing and required test results |
| 20 | BS EN 55025-2003 | 车载、船载和设备上的接收机抗无线电干扰特征.限值和测量方法 | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement |
| 21 | BS EN 61108-4-2004 | 海上导航和无线电通信设备和系统.全球导航卫星系统(GNSS).船载DGPS和DGLONASS无线电信标接收设备.性能要求 | Marine navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test results |
| 22 | DIN EN 1914-1997 | 内河航运船舶.船载小艇 | Inland navigation vessels - Ship's boats; German version EN 1914:1997 |
| 23 | DIN EN 61996-2001 | 船舶导航和无线电通信设备和系统.船载航行数据记录仪.性能要求.试验方法和规定的试验结果 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements; Methods of testing and required test results (IEC 61996:2000); German version EN 61996:2000 |
| 24 | DIN EN 60936-2-1999 | 海上导航与无线电通信设备和系统.雷达.第2部分:用与高速飞行器的船载雷达.试验方法和要求的试验结果 | Maritime navigation and radiocommunication equipment and systems - Radar - Part 2: Shipborne radar for high-speed craft (HSC); methods of testing and required test results (IEC 60936-2:1998); German version EN 60936-2:1999 |
| 25 | DIN EN 61993-1-2000 | 海上导航和无线电通信设备和系统.第1部分:使用甚高频数字选择呼叫(DSC)技术的船载自动发射机应答器系统安装 | Maritime navigation and radiocommunication equipment and systems - Part 1: Shipborne automatic transponder system installation using VHF digital selective calling (DSC) techniques; operational and performance requirements, methods of testing and required test results (IEC 61993-1:1999); German version EN 61993-1:1999 |
| 26 | DIN EN 55025-2003 | 车载、船载和设备上的接收机保护用无线电干扰特征.限值和测量方法 | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement (IEC/CISPR 25:2002); German version EN 55025:2003 |
| 27 | DIN EN 61993-2-2002 | 海上导航和无线电通信设备和系统.自动识别系统(AIS).第2部分:通用自动识别系统的A级船载设备.操作和性能要 | Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 2: Class A shipborne equipment of the universal automatic identification system (AIS); Operational and performance requirements, methods of test and required test results (IEC 61993-2:2001); German version EN 61993-2:2002, text in English |
| 28 | DIN EN 61108-4-2005 | 海上导航和无线电通信设备与系统.全球导航卫星系统(GNSS).第4部分:船载DGPS和DGLONASS海上无线电信号接收设 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test results (IEC 61108-4:2004); German version EN 61108-4:2004, text English |
| 29 | IEC 61097-4-1994 | 全球海上遇险和安全系统(GMDSS) 第4部分:INMARSAT-C 船载地面站和INMARSA增强群呼叫设备(EGC) 操作和性能要 | Global maritime distress and safety system (GMDSS) - Part 4: INMARSAT-C ship earth station and INMARSAT enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results |
| 30 | IEC 61097-10-1999 | 全球海上遇险和安全系统(GMDSS) 第10部分:Inmarsat-B船载地面站设备 操作和性能要求、测试方法和要求的测试 | Global maritime distress and safety system (GMDSS) - Part 10: Inmarsat-B ship earth station equipment - Operational and performance requirements, methods of testing and required test results |
| 31 | IEC 61993-2-2001 | 海上导航和无线电通信设备及系统 自动识别系统（AIS） 第2部分：通用自动识别系统（AIS）的A类船载设备 | Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 2: Class A shipborne equipment of the universal automatic identification system (AIS); Operational and performance requirements, methods of test and required test results |
| 32 | IEC 60936-1 AMD 1-2002 | 船舶导航和无线电通信设备及系统.雷达.第1部分:船载雷达的性能要求.试验方法和要求的试验结果.修改件1 | Maritime navigation and radiocommunication equipment and systems - Radar - Part 1: Shipborne radar; Performance requirements; Methods of testing and required test results; Amendment 1 |
| 33 | IEC 61097-13-2003 | 全球海上遇险和安全系统(GMDSS).第13部分:Inmarsat F77船载地面站设备.操作和性能要求、试验方法和要求的试 | Global maritime distress and safety system (GMDSS) - Part 13: Inmarsat F77 ship earth station equipment; Operational and performance requirements, methods of testing and required test results |
| 34 | IEC 60092-351-2004 | 船舶电气设施.第351部分:船载和海上成套动力装置、远程通讯及控制数据电缆用绝缘材料 | Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables |
| 35 | IEC 61108-4-2004 | 海上导航和无线电通信设备与系统.全球导航卫星系统(GNSS).第4部分:船载DGPS和DGLONASS海上无线电信号接收设 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test results |
| 36 | IEC 62287-1-2006 | 航海和无线电通信设备和系统.自动识别系统(AIS)的B级船载设备.第1部分:载波监听分时多路访问(CSTDMA)技术 | Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques |
| 37 | GB/T 15869-1995 | 卫星通信船载地球站码分多址通信设备通用技术条件 | General specification of satellite communication earth station for shipborne communication equipment for CDMA |
| 38 | GB/T 20068-2006 | 船载自动识别系统(AIS)技术要求 | Technical requirements of shipborne automatic identification system |
| 39 | GB/T 10102-1988 | 造船船载驳系列3通风系统主要配合尺寸 | Shipbuilding--Shipborne barges， series 3--Ventilation system--Principal mating dimensions |
| 40 | NF Z84-720-2000 | 无线电设备和系统(RES).船载UHF通信系统和设备的技术特性和测量方法 | (Radio Equipment and Systems (RES) - Technical characteristics and methods of measurement for UHF on-board communications systems and equipment.) |
| 41 | NF C91-025-2003 | 车载、船载和设备上的接收机保护用无线电干扰特性.极限值和测量方法 | (Radio disturbance characteristics for the protection of receivers used on board vehicles, boats and on devices - Limits and methods of measurement.) |
| 42 | NF C46-802-1-2002 | 海上导航和无线电通信设备及系统.雷达.第1部分:船载雷达.性能要求.测试方法和要求的测试结果 | (Maritime navigation and radiocommunication equipment and systems - Radar - Part 1 : shipborne radar - Performance requirements - Methods of testing and required test results.) |
| 43 | NF C46-816-2001 | 船舶导航和无线电通信设备和系统.船载航行数据记录仪.性能要求.试验方法和要求的试验结果 | (Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results.) |
| 44 | NF C46-802-1/A1-2003 | 海上导航和无线电通信设备及系统.雷达.第1部分:船载雷达.性能要求.试验方法和要求的试验结果 | (Maritime navigation and radiocommunication equipment and systems - Radar - Part 1 : shipborne radar - Performance requirements - Methods of testing and required test results.) |
| 45 | NF J83-911-1997 | 内河航运用船舶.船载小艇 | (Inland navigation vessels. Ship`s boats.) |
| 46 | prEN 61097-4-1994 | 全球海上遇险和安全系统(GMDSS) 第4部分：INMARSAT-C 船载地面接收站和INMARSAT 增强群呼叫设备(EGC) 操 | Draft IEC 61097-4: Global maritime distress and safety system (GMDSS) - Part 4: INMARSAT-C ship earth station and INMARSAT enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results |
| 47 | ANSI/ASTM F1994-2000 | 船载固定泡沫灭火系统试验方法 | Test Method for Shipboard Fixed Foam Firefighting Systems |
| 48 | ANSI/ASHRAE 151P-2002 | 测量、检验、调节和平衡船载加热、通风、空气调节和制冷系统的实施规程 | Practices for Measurement, Testing, Adjusting and Balancing Shipboard Heating, Ventilation, Air Conditioning and Refrigeration Systems |
| 49 | ANSI S2.29-2003 | 船载机械上机器转轴振动的测量和评价指南 | Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery |
| 50 | ANSI S2.28-2003 | 船载机械振动的测量和评价指南 | Guide for the Measurement and Evaluation of Vibration of Shipboard Machinery |
| 51 | ANSI/ASTM F2283-2004 | 船载除油系统的规范 | Specification for Shipboard Oil Pollution Abatement System |
| 52 | ASTM F 1994-1999 | 船载固定泡沫灭火系统的标准试验方法 | Standard Test Method for Shipboard Fixed Foam Firefighting Systems |
| 53 | ASTM F 2283-2004 | 船载防油污染系统的标准规范 | Standard Specification for Shipboard Oil Pollution Abatement System |
| 54 | BS MA 87-1-1980 | 系列1船载驳船.主要尺寸规范 | Series 1 shipborne barges - Specification for main dimensions |
| 55 | BS MA 87-2-1985 | 系列1船载驳船.第2部分:主要技术要求规范 | Series 1 shipborne barges - Specification for principal technical requirements |
| 56 | BS MA 99-1-1985 | 系列4船载驳船.第1部分:主要尺寸规范 | Series 4 shipborne barges - Specification for main dimensions |
| 57 | BS MA 104-1-1987 | 系列2船载驳船.第1部分:主要尺寸规范 | Series 2 shipborne barges - Specification for main dimensions |
| 58 | BS MA 87-3-1987 | 系列1船载驳船.第3部分:吊杆铸件的排列、尺寸和试验方法规范 | Series 1 shipborne barges - Specification for the arrangement, dimensions and method of test for lifting post castings |
| 59 | BS MA 105-1-1987 | 系列3船载驳船.第1部分:主要尺寸规范 | Series 3 shipborne barges - Specification for main dimensions |
| 60 | BS MA 105-3-1987 | 系列3船载驳船.第3部分:通风装置的主要配合尺寸规范 | Series 3 shipborne barges - Specification for principal mating dimensions for the ventilating system |
| 61 | BS 7472-1991 | 全系列船载驳船规范 | Classification for shipborne barges of all series |
| 62 | GB/T 13351-1992 | 船底防锈漆通用技术条件 | General specification for anti-corrosion painton ship bottom |
| 63 | GB/T 6822-1986 | 船底防污漆通用技术条件 | General specification for antifouling paint on ship bottom |
| 64 | GB/T 6824-1986 | 船底防污漆铜离子实海渗出率测定法 | Determination for leaching rate on raft of cupper ion for antifouling paint on ship bottom |
| 65 | GB/T 6825-1986 | 船底防污漆有机锡单体实海渗出率测定法 | Determination for leaching rate on raft of organotin for antifouling paint on ship bottom |
| 66 | JIS F1034-4-2006 | 小艇.船体结构和尺寸.第4部分:车间和制造 | Small craft -- Hull construction and scantlings -- Part 4: Workshop and manufacturing |
| 67 | JIS F1036-2003 | 船体长度小于 8 m 的小船.最大推进功率额定值的测定 | Small craft less than 8 m length of hull -- Determination of maximum propulsion power rating |
| 68 | JIS F1034-2-2006 | 小艇.船体结构和尺寸.第2部分:材料:夹层结构用芯材料、嵌入材料 | Small craft -- Hull construction and scantlings -- Part 2: Materials: Core materials for sandwich construction, embedded materials |
| 69 | JIS F0080-1998 | 小船.船体识别.编码系统 | Small craft -- Hull identification -- Coding system |
| 70 | JIS F0045-1992 | 游乐船.词汇.船体 | Pleasure boat -- Vocabulary -- Hull |
| 71 | ISO 12215-1-2000 | 小艇 船体结构和尺寸 第1部分:材料:热固性树脂、玻璃纤维增强材料、基准层压板 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
| 72 | ISO 12217-2-2002 | 小艇.稳定性和浮力评估和分类.第2部分:船体大于或等于6米的带帆小艇 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m |
| 73 | ISO 12217-1-2002 | 小艇.稳定性和浮力评估和分类.第1部分:船体大于或等于6米的无帆小艇 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m |
| 74 | ISO 12215-4-2002 | 小艇.船体结构和尺寸.第4部分:车间和制造 | Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing |
| 75 | ISO 12215-3-2002 | 小型船舶.船体结构和船材尺寸.第3部分:材料:钢,铝合金,木料及其它材料 | Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials |
| 76 | ISO 12215-2-2002 | 小艇.船体结构和尺寸.第2部分:材料:夹层结构用芯材料,嵌入材料 | Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials |
| 77 | ISO 10087-2006 | 小艇.船体标识.编码系统 | Small craft - Craft identification - Coding system |
| 78 | DIN EN ISO 12217-3-2003 | 小艇.稳定性和浮力评估和分类.第2部分:船体大于或等于6米的带帆小艇 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2002); German version EN ISO 12217-3:2002 |
| 79 | DIN EN ISO 10087-2006 | 小艇.船体标识.编码系统 | Small craft - Craft identification - Coding system (ISO 10087:2006); German version EN ISO 10087:2006 |
| 80 | BS EN ISO 12215-3-2002 | 小艇.船体构造和船材尺寸.材料.钢、铝合金、木材及其它材料 | Small craft - Hull construction and scantlings - Materials - Steel, aluminium alloys, wood, other materials |
| 81 | BS EN ISO 12217-3-2002 | 小艇.稳定性和浮力评估和分类.船体长度小于6米的小艇 | Small craft - Stability and buoyancy assessment and categorization - Boats of hull length less than 6 m |
| 82 | BS EN ISO 12215-2-2002 | 小艇.船体构造和船材尺寸.材料.夹层结构的芯材.嵌入材料 | Small craft - Hull construction and scantlings - Materials - Core materials for sandwich construction, embedded materials |
| 83 | BS EN ISO 12215-4-2002 | 小艇.船体构造和船材尺寸.车间和生产 | Small craft - Hull construction and scantlings - Workshop and manufacturing |
| 84 | BS 8435-2005 | 小艇.备用浮力.六米及以下长度船体的船 | Small craft - Reserve flotation - Boats up to six metres length of hull |
| 85 | DIN ISO 7460-1988 | 造船.信息处理.船体型线.标识几何数据 | Shipbuilding; information processing; shiplines; identification geometric data; identical with ISO 7460, edition 1983 |
| 86 | BS EN ISO 12215-1-2000 | 小艇.船体结构和船材尺寸.材料：玻璃纤维增强热固性树脂标准层压板材 | Small craft - Hull construction and scantlings - Materials - Thermosetting resins, glass-fibre reinforcement, reference laminate |
| 87 | EN ISO 12217-3-2002 | 小艇 稳定性及浮力的评估和分类 第3部分：船体长度小于6m的小船 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2002) |
| 88 | ANSI/ASTM F2016-2000 | 规定船体结构、舾装设备和涂层的质量要求惯例 | Practice for Establihsing Shipbuiling Quality Requirements for Hull Structure, Outfitting and Coatings |
| 89 | ANSI/AWS D3.7-2004 | 铝制船体焊接指南 | Guide for Aluminum Hull Welding |
| 90 | ANSI/ASTM F941-2000 | 船体表面准备和涂料涂敷检验规程 | Practice for Inspection of Marine Surface Preparation and Coating Application |
| 91 | ASTM F 941-1999 | 船体表面准备和涂料涂敷的检验的标准操作规程 | Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| 92 | ASTM F 2016-2000 | 确定造船船体构造、装配和涂层质量要求的标准实施规范 | Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings |
| 93 | ASTM D 6990-2005 | 评估船体涂覆系统的耐生物附着性和物理特性的标准规程 | Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems |
| 94 | NF J95-046-4-2002 | 小艇.船体结构和建材尺寸.第4部分:车间和制造 | (Small craft - Hull construction and scantlings - Part 4 : workshop and manufacturing.) |
| 95 | EN ISO 12215-1-2000 | 小艇 船体结构和尺寸 第1部分：材料：热固性树脂、玻璃纤维增强材料、基准层压板 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
| 96 | EN ISO 12215-4-2002 | 小艇 船体结构和尺寸 第4部分：车间及生产 | Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
| 97 | EN ISO 12215-2-2002 | 小艇 船体结构和尺寸 第2部分：夹层结构用芯型材料、嵌入材料 | Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
| 98 | EN ISO 12215-3-2002 | 小艇 船体结构和尺寸 第3部分：材料：钢、铝合金、木材、其它材料 | Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
| 99 | EN ISO 12217-1-2002 | 小艇 稳定性及浮力的评估和分类 第1部分：船体长度大于或等于6m的非帆船 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2002) |
| 100 | EN ISO 12217-2-2002 | 小艇 稳定性及浮力的评估和分类 第2部分：船体长度大于或等于6m的帆船 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2002) |
| 101 | GB/T 7453-1996 | 船体振动测量 | Measurement of ship vibration |
| 102 | GB/T 7727.4-1987 | 船舶通用术语船体结构、强度及振动 | General terminology for ship’s structure， strength and vibration |
| 103 | GB/T 8242.1-1987 | 船体设备术语船用装置 | Terminology for hull equipment--Marine gear |
| 104 | GB/T 8242.2-1987 | 船体设备术语系船设备 | Terminology for hull equipment--Anchoring and mooring equipment |
| 105 | GB/T 8242.3-1987 | 船体设备术语舱面属具 | Terminology for hull equipment--Deck equipment and fittings |
| 106 | GB/T 8242.4-1987 | 船体设备术语救生设备 | Terminology for hull equipment--Life-saving appliances |
| 107 | GB/T 3108-1999 | 船体外加电流阴极保护系统 | Impressed current cathodic protection system for ship hull |
| 108 | GB/T 4476.1-1984 | 金属船体制图一般规定 | Drawings for metal hull of ships--General provisions |
| 109 | GB/T 4476.2-1984 | 金属船体制图图形符号 | Drawings for metal hull of ships--Graphical symbols |
| 110 | GB/T 4476.3-1984 | 金属船体制图图样画法及编号 | Drawings for metal hull of ships--Presentation and coding of drawings |
| 111 | GB/T 4476.4-1984 | 金属船体制图尺寸注法 | Drawings for metal hull of ships--Dimensioning |
| 112 | GB/T 17184-1997 | 船图积载图报文 | Bay plan/Stowage plan--Occupied and empty locations message |
| 113 | BS ISO 128-25-2000 | 技术图纸.表示的一般原则.造船图纸上的线条 | Technical drawings - General principles of presentation - Lines on shipbuilding drawings |
| 114 | ANSI/AWS D3.5-1993 | 钢船壳结构焊接指南 | Steel Hull Welding, Guide for |
| 115 | GB/T 6745-1986 | 船壳漆通用技术条件 | General specification of topside paint |
| 116 | NF J95-026/A1-2000 | 小艇.船壳识别.编码系统 | (Small craft - Hull identification - Coding system.) |
| 117 | GB/T 13561.2-1992 | 港口连续装卸设备安全规程气力卸船机 | Safety rules on port’s continuous handling facilities--Pneumatic unloader |
| 118 | GB 18224-2000 | 桥式抓斗卸船机安全规程 | Safety code for the bridge type grab ship unloader |
| 119 | ISO 20957-7-2005 | 固定式训练设备.第7部分:划船机附加的特殊安全要求和试验方法 | Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test method |
| 序号 | 编号 | 中文名称 | 英文名称 |
|---|