| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI C78.1430-1997 | 电灯.幻灯放映机灯.带GX5.3基座的冷凝、二色性、1.65Inch(42mm)、带整体反射镜的边缘标准卤钨灯 | Electric Lamps - Slide Projector Lamps - Condensing, Dichroic, 1.65-Inch (42mm), Integral Reflector Rim-Reference Tungsten-Halogen Lamps with GX5.3 Bases |
| ANSI C78.1431-1997 | 电灯:幻灯放映机灯:带GY5.3基座的冷凝、二色性、2英寸(51mm)、带整体反光镜的边缘标准卤钨灯 | Electric Lamps: Slide Projector Lamps: Condensing, Dichroic, 2-Inch (51-mm), Integral Reflector, Rim-Reference Tungsten-Halogen Lamps with GY5.3 Bases |
| ANSI C78.1432-1997 | 电灯.GZ9.5双插头、预聚焦灯座和36.5mm标定光源中心长度的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5mm Nominal Light Center Length |
| ANSI C78.1433-2001 | 带GX5.3基座的2英寸(51mm)整体反射边缘标准卤钨大屏幕投射灯 | Two-Inch (51-mm) Integral Reflector, Rim Reference, Tungsten Halogen Large Screen Projection Lamps with GX 5.3 Bases |
| ANSI C78.1434-2001 | 带GX7.9基座的冷凝二色性涂层整体反光侧钉的卤钨投射灯 | Condensing Dichroic Coated Integral Reflector Side Pin Tungsten Halogen Projection Lamps with GX7.9 Bases |
| ANSI C78.1435-2002 | 投射灯.带G5.3基座的卤钨灯 | Projection Lamps - Tungsten-Halogen Lamps with G5.3 Bases |
| ANSI C78.1451-2002 | 电灯.钨卤素灯保护罩的使用.注意事项 | Electric Lamps - Use of Protective Shields with Tungsten-Halogen Lamps - Cautionary Notice |
| ANSI C78.1460-2004 | GZ9.5基座,T6灯泡,36.5毫米LCL,76.2毫米MOL,有近反射器的单端钨卤素灯 | Single-Ended Tungsten-Halogen Lamps, GZ9.5 Base, T6 Bulb, 36.5 mm LCL, 76.2 mm MOL with Proximity Reflector |
| ANSI C78.1500-2001 | 电灯.带P28型基座和89mmLCL的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with P28 Bases and 89 mm LCL |
| ANSI C78.1501-2001 | 电灯.带G22型基座和63.5mmLCL的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with G22 Bases and 63.5 mm LCL |
| ANSI C78.1503-2001 | 电灯.带G9.5型基座和60.5mmLCL的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with G9.5 Bases and 60.5 mm LCL |
| ANSI C78.1504-2001 | 电灯.带P28型基座和55.5mmLCL的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with P28 Bases and 55.5 mm LCL |
| ANSI C78.1505-2001 | 电灯.带G38型基座和127mmLCL的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with G38 Bases and 127 mm LCL |
| ANSI C78.260-2002 | 钨卤素管灯.物理性能 | Tubular Tungsten-Halogen Lamps, Physical Characteristics |
| ANSI C78.60432.1-2003 | 电灯.白炽灯.安全规范.家用和类似一般照明用卤钨灯.第1部分 | For Electric Lamps- Incandescent Lamps- Safety Specifications - Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes- Part 1 |
| ANSI C78.60432.2-2004 | 电灯.白炽灯.安全规范.家用和类似一般照明用钨卤灯.第2部分 | For Electric Lamps- Incandescent Lamps- Safety Specifications - Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes- Part 2 |
| ANSI C78.60432.3-2004 | 电灯.白炽灯.安全规范.第3部分:钨卤灯 | Electric Lamps- Incandescent Lamps-Safety Specifications-Part 3 : Tungsten halogen lamps |
| ANSI PH2.29-1982 | 摄影感光测定用发光体.日光灯和钨丝白炽灯 | Illuminants for Photographic Sensitometry: Daylight and Incandescent Tungsten |
| ANSI/ASTM B574-1999 | 低碳镍钼铬,低碳镍铬钼和低碳镍铬钼钨合金棒规范 | Specification for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
| ANSI/ASTM B663-1994 | 银钨硬质合金电触点材料规范 | Specification for Silver-Tungsten Carbide Electrical Contact Material |
| ANSI/ASTM B719-2000 | 镍铬钼钴钨铁硅合金(UNS N06333)棒材规范 | Specification for Nickel-Chromium-Molybdenum-Cobalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ANSI/ASTM B722-1995 | 镍铬钼钴钨铁硅合金(UNS N06333)无缝管规范 | Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube |
| ANSI/ASTM B726-1996 | 镍铬钼钴钨铁硅合金 (UNS N06333)焊管规范 | Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ANSI/ASTM B814-1996 | 镍铬铁钼钨合金板材、薄板材和带材规范 | Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip |
| ANSI/ASTM B815-1996 | 钴铬镍钼钨合金杆规范 | Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ANSI/ASTM B818-1998 | 钴铬镍钼钨合金(UNS R31233)板,薄板和带材规范 | Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip |
| ANSI/AWS A5.12/A 5.12M-1998 | 电弧焊接和切割用钨及钨合金焊条 | Tungsten and Tungsten Alloy Electrodes for Arc Welding and Cutting |
| ANSI/AWS A5.22-2005 | 助溶剂芯弧焊用不锈钢焊条和钨电极惰性气体保护焊用不锈钢助溶剂芯焊条规范 | Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding |
| ANSI/AWS B2.1-1-007-2002 | 在焊接条件下、有或没有垫板、10到18规格的镀锌钢的钨电极惰性气体保护焊 | Gas Tungsten Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-008-2002 | 在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的钨电极惰性气体保护焊 | Gas Tungsten Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-021-2005 | 在焊接或PWHT条件下1/8到1-1/2英尺厚ER70S-2和E7018碳钢的保护金属电弧焊和钨电极惰性气体保护电弧焊的标准 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-207-1996 | 主要用于管道的、在焊接或PWHT条件下(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、ER70S-2碳钢的钨极电弧焊的标 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2, As Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-209-1996 | 主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、ER70S-2及E7018碳钢的药皮焊 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1 /8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-210-2001 | 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-211-2001 | 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1/8-010-2002 | 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的钨电极惰性气体保护焊 | Gas Tungsten Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1/8-229-2002 | 碳钢与奥氏体不锈钢气体钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M- 8/P-8/S-8, 组1)1/8到1-1/2英寸厚ER30 | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1/8-230-2002 | 气体保护钨极弧焊的标准焊接程序规范(WPS),可熔嵌入根部的,碳钢与奥氏体不锈钢(M-1/P-1/S-1, 组 1 和 2 焊 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and ER309, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1/8-231-2002 | 带可熔嵌入焊条的碳钢与奥氏体不锈钢气体保护钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M- 8/P-8/S-8, 组1) | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, 16, or, 17, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-217-1999 | 铬钼钢气体保护钨极弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组)ER 80S-B2.在焊接条件下1/8到1/2英寸厚或在PW | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) ER80S-B2, 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick PWHT Condition, Primarily Pipe Application |
| ANSI/AWS B2.1-4-219-1999 | 气体保护钨极弧焊以及铬钼钢的气体保护钨极弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组).在焊接条件下1/8到12 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 12/2 in. thick, As-Welded Condition or 1/8 through 1/1/2 in. Thick, PWHT Condition ER80S-B2, E8018-B2 Primarily Pipe Application |
| ANSI/AWS B2.1-4-220-1999 | 标准焊接程序规范(WPS).主要用于IN515, ER80S-B2管道的、在焊接或1/8到3/4英寸厚PWHT条件下、(M-4/P-4/S-4, | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition IN515, ER80S-B2, Primarily Pipe Application |
| ANSI/AWS B2.1-4-221-1999 | 气体保护钨极弧焊(自耗嵌入式焊缝根部)以及铬钼钢保护金属电弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组).在 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, IN515, ER80S-B2 and E8018-B2, Primarily Pipe Application |
| ANSI/AWS B2.1-5A-222-1999 | 铬钼钢气体保护钨极弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下ER 90S-BS,1/8到1/2英寸厚或在PWHT条件 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER90S-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition, Primarily Pipe Application |
| ANSI/AWS B2.1-5A-224-1999 | 气体保护钨极弧焊以及铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下1/8到1/2英寸厚或在P | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, ER90S-B3, E9018-B3, Primarily Pipe Application |
| ANSI/AWS B2.1-5A-225-1999 | 标准焊接程序规范(WPS).主要用于IN521,ER90S-B3管道的、在焊接或1/8到3/4英寸厚PWHT条件下、(M-5A或P-5A)1/ | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2 in. thick, As-Welded Condition or 1/8 through 3/4 in. thick, PWHT Condition IN521, ER90S-B3 Primarily Pipe Application |
| ANSI/AWS B2.1-5A-226-1999 | 气体保护钨极弧焊(自耗嵌入式焊缝根部)以及铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, IN521, ER90S-B3, and E9018-B3, Primarily Pipe Application |
| ANSI/AWS B2.1-8-009-2002 | 在焊接条件下、有或没有垫板、10到18规格的不锈钢(M-8或P-8)的钨电极惰性气体保护焊 | Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-8-024-2001 | 在焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保护焊的焊接程序规范(WP | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B2.1-8-025-2001 | 在焊接条件下、保护金属电弧焊之后的1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保 | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B2.1-8-212-2001 | 主要用于管道的、在ERXX焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-214-2001 | 标准焊接程序规范(WPS).主要用于管道的,在焊接条件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奥氏体不锈钢(M-8/P | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-215-2001 | 在 IN3XX和ER3XX焊接条件下、1/8到1-1/2英寸厚的自耗嵌入式奥氏体不锈钢(M-8/P-8/S-8,组1)钨电极惰性气体保 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 Inch Thick IN3XX and ER3XX, As-Welded Condition |
| ANSI/AWS B2.1-8-216-2001 | 标准焊接程序规范(WPS).焊接用, 1/8到1-1/2英寸厚IN3XX,ER3XX和E3XX-XX的奥氏体不锈钢(M-8/P-8/S-8,组1)的 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch Thick IN3XX, ER3XX, and E3XX-XX, As-Welded Condition |
| ANSI/AWS B2.1.009-1990 | 10至18号有或无背衬焊态条件下不锈钢(M-8或P-8)钨极气弧焊接 | Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1.015-1991 | 在焊接条件下、有或没有垫板、10到18规格（M-22/P-22)铝的气体保护钨极弧焊的标准焊接程序规范(WPS) | Standard Welding Procedure Specification - Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1.22-015-2002 | 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格铝(M-22或P-22)的钨电极惰性气体保护焊 | Standard Welding Procedure Specification - Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS C5.5/C 5.5M-2003 | 钨电极惰性气体保护焊的推荐规范 | Recommended Practices for Gas-Tungsten-Arc Welding |
| ANSI/AWS D10.6-2000 | 钛管和管道钨电极气体保护焊推荐规程 | Gas Tungsten Arc Welding of Titanium Piping and Tubing, Recommended Practice for |
| ANSI/IEC C78.682-1997 | 电灯.测定卤钨石英灯收缩温度的标准方法 | Electric Lamps - Standard Method of Measuring the Pinch Temperature of Quartz Tungsten-Halogen Lamps |
| ASTM A 1017/A 1017M-2006 | 铬钼钨合金钢制压力容器板材的标准规范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
| ASTM A 1041/A 1041M-2004 | 较高强度铬-钼-钨合金钢压力容器板的标准规范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten |
| ASTM A 144-2004 | 钨铁合金规范 | Specification for Ferrotungsten |
| ASTM B 390-1992 | 钨硬质合金表观晶粒尺寸及其分布的评定 | Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides |
| ASTM B 446-2003 | 镍铬钼铌合金(UNS N06625)、镍铬钼硅合金(UNS N06219)和镍铬钼钨合金(UNS N06650)杆材和棒材标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar |
| ASTM B 482-1985 | 电镀用钨和钨合金的制备 | Preparation of Tungsten and Tungsten Alloys for Electroplating |
| ASTM B 631-1993 | 银钨电接触材料标准规范 | Standard Specification for Silver-Tungsten Electrical Contact Materials |
| ASTM B 663-1994 | 银钨硬质合金电触点材料标准规范 | Standard Specification for Silver-Tungsten Carbide Electrical Contact Material |
| ASTM B 702-1993 | 铜钨电触点材料标准规范 | Standard Specification for Copper-Tungsten Electrical Contact Material |
| ASTM B 718-2000 | 镍铬钼钴钨铁硅合金板,薄板和带材的标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM B 719-2000 | 镍铬钼钴钨铁硅合金(UNS N06333)棒标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ASTM B 722-2002 | 镍铬钼钴钨铁硅合金无缝管标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube |
| ASTM B 723-2000 | 镍铬钼钴钨铁硅合金焊接管的标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe |
| ASTM B 726-1995 | 镍铬钼钴钨铁硅合金焊接管标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ASTM B 755-2000 | 镍铬钼钨合金板、薄板和带材标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip |
| ASTM B 756-2000 | 镍铬钼钨合金(UNS N06110)棒材和杆材标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar |
| ASTM B 757-2000 | 镍铬钼钨合金焊接管标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe |
| ASTM B 758-2000 | 镍铬钼钨合金焊接管标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube |
| ASTM B 759-2000 | 镍铬钼钨合金管标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube |
| ASTM B 760-1986 | 钨板,薄板和箔 | Tungsten Plate, Sheet and Foil |
| ASTM B 777-1999 | 钨基高密度金属标准规范 | Standard Specification for Tungsten Base, High-Density Metal |
| ASTM B 814-2002 | 镍铬铁钼钨合金(UNS N06920)厚板、薄板和带材的标准规范 | Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip |
| ASTM B 815-2002 | 钴铬镍钼钨合金杆标准规范 | Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ASTM B 818-2003 | 钴铬镍钼钨合金板、薄板和带材标准规范 | Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip |
| ASTM B 890-2002 | X射线荧光光谱法测定钨合金和碳化钨金属成分的标准试验方法 | Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry |
| ASTM B 930-2003 | 确定烧结碳化钨(硬质合金)中不规则大颗粒的频度和粒径额定值的标准试验方法 | Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals) |
| ASTM E 159-2000 | 钴、铜、钨和铁粉末的氢损耗的标准试验方法 | Standard Test Method for Hydrogen Loss of Cobalt, Copper, Tungsten, and Iron Powders |
| ASTM E 696-2000 | 钨--铼合金热电偶丝的标准规范 | Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire |
| ASTM E 988-1996 | 钨铼丝热电偶的温度电动势(EMF)图表 | Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples |
| ASTM F 1894-1998 | 定量分析硅化钨半导体加工膜组分和厚度的标准试验方法 | Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness |
| ASTM F 204-1976 | 密封钨丝和钨条表面裂纹的试验方法 | Test Method for Surface Flaws in Tungsten Seal Rod and Wire |
| ASTM F 269-1960 | 钨丝弯曲度的试验方法 | Test Method for Sag of Tungsten Wire |
| ASTM F 288-1996 | 电子器件和电灯用钨丝标准规范 | Standard Specification for Tungsten Wire for Electron Devices and Lamps |
| ASTM F 73-1996 | 电子器件及灯泡用钨铼合金丝 | Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps |
| ASTM F 90-1997 | 外科植入设备用锻制钴铬钨镍合金 | Standard Specification for Wrought Cobalt-20 Chromium-15 Tungsten-10 Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| BS 2593-1974 | 旋转钻杆与碳化钨硬质合金旋转钻头规范 | Specification for rotary drill rods and tungsten carbide tipped rotary drill bits |
| BS 2HC 207-1989 | 镍-钴-钨-铬-铝-钽-铪-钛合金铸件规范(镍基钴10.0、钨10.0、铬9.0、铝5.5、钽25、铪1.5、钛1.5) | Specification for nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5) |
| BS 2HC 208-1989 | 镍-钴-钨-铬-铝-钼-钛-钽合金铸件规范(镍基钴10.0、钨10.0、铬9.0、铝5.5、钼2.5、钛1.5、钽1.5) | Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantalu m alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5) |
| BS 2HC 210-1989 | 镍-钨-铝-铬-钼合金铸件规范(镍基钨10.5、铝6.0、铬6.0、钼2.0) | Specification for nickel-tungsten-aluminium-chromium-molybdenum alloy castings (Nickel base W 10.5, Al 6.0, Cr 6.0, Mo 2.0) |
| BS 2S 111-1964 | 飞机材料规范.镍铬钨阀门钢 | Specification for aircraft material - Nickel-chromium-tungsten valve steel |
| BS 3727-14-1964 | 电子管和电子阀用镍的分析方法.第14部分:钨含量测定(重量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method) |
| BS 4872-2-1976 | 不要求批准焊接工艺时焊工的鉴定考试规范.第2部分:铝及铝合金钨极惰性气体保护电弧焊或熔化极惰性气体保护 | Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys |
| BS 5518-1977 | 钨丝灯照明用电子可调控制开关(调光器开关)规范 | Specification for electronic variable control switches (dimmer switches) for tungsten filament lighting |
| BS 6179-1982 | 通用钨丝灯(寿命2000小时)规范 | Specification for tungsten filament lamps for general service (with lives of 2000 h) |
| BS 6200-3.31.2-1992 | 铁、钢和其他黑色金属抽样和分析.第3部分:分析方法.第31节:锡含量测定.第2分节:钨铁和钨金属:体积法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of tin - Ferrotungsten and tungsten metal: volumetric method |
| BS 6200-3.33.1-1992 | 铁、钢和其他黑色金属抽样和分析.第3部分:分析方法.第33节:钨含量测定.第1小节:钢:称重法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of tungsten - Steel: gravimetric method |
| BS 6200-3.33.2-1992 | 铁、钢和其他黑色金属抽样和分析.第3部分:分析方法.第33节:钨含量测定.第2分节:钢:分光光度法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of tungsten - Steel: spectrophotometric method |
| BS 6200-3.33.3-1985 | 铁、钢和其他黑色金属抽样与分析.第3部分:分析方法.第33节:钨含量测定.第3小节:铁钨合金:称重法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of tungsten - Ferrotungsten: gravimetric method |
| BS 7252-5-1994 | 外科植入物用金属材料.第5部分:可锻钴-铬-钨-镍合金规范 | Metallic materials for surgical implants - Specification for wrought cobalt-chromium-tungsten-nickel alloy |
| BS 7252-8-1997 | 外科植入物用金属材料.可锻钴-镍-铬-钼-钨-铁合金规范 | Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| BS EN 1668-1997 | 焊接用料.非合金和细晶粒钢和钨极惰性气体保护用的焊条,焊丝和沉积物.分类 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification |
| BS EN 60064-1996 | 家用和类似普通照明用钨丝灯泡.性能要求 | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| BS EN 60357-2003 | 卤钨灯(非车辆用).性能规范 | Tungsten halogen lamps (non-vehicle) - Performance specifications |
| BS EN 60432-1-2000 | 白炽灯安全性规范.家用和类似普通照明用的钨丝灯 | Incandescent lamps — Safety specifications — Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| BS EN 60432-2-2000 | 白炽灯安全性规范.家用和类似普通照明用的卤钨灯 | Incandescent lamps - Safety specifications - Tungsten halogen lamps for domestic and similar general lighting purposes |
| BS EN 60432-3-2003 | 白炽灯安全规范.卤钨灯(非车用) | Incandescent lamps - Safety specifications - Tungsten-halogen lamps (non-vehicle) |
| BS EN 60682-1994 | 石英卤钨灯灯夹温度测量方法 | Method for measuring the pinch temperature of quartz-tungsten-halogen lamps |
| BS EN 61047-2004 | 钨丝灯用交直流供电电子降压转换器.性能要求 | D.C. or A.C. supplied electronic step-down convertors for filament lamps - Performance requirements |
| BS EN 61558-2-9-2003 | 电力变压器、供电设备及类似设备的安全.Ⅲ类手抽式钨丝灯的变压器的特殊要求 | Safety of power transformers, power supply units and similar products - Particular requirements for transformers for class III handlamps for tungsten filament lamps |
| BS EN ISO 10650-1-2005 | 牙科学.动力聚合活化剂.石英钨卤素灯 | Dentistry - Powered polymerization activators - Quartz tungsten halogen lamps |
| BS EN ISO 6848-2005 | 电弧焊和切割.非自耗钨电极.分类 | Arc welding and cutting - Nonconsumable tungsten electrodes - Classification |
| BS EN ISO 9692-3-2001 | 焊接和相关工艺.接头的准备.铝及其合金的金属极惰性气体保护焊和钨极惰性气体保护焊 | Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| BS HC 103-1974 | 23%铬-镍-钨耐腐蚀钢铸件(铬23、镍11、钨3)规范 | Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3) |
| BS HC 202-1973 | 沉淀硬化镍基铬-铌-钼-铁-钨合金铸件规范(铬20.0、铌6.6、钼6.0、铁3.0、钨2.5) | Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5) |
| BS HC 301-1973 | 钴基铬-镍-钨合金铸件规范(铬25.5、镍10.5、钨7.5) | Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5) |
| BS HR 204-1972 | 镍-铬-铁-钼-钴-钨耐热合金板材,薄板材和带材(镍基、Cr22、Fe18.5、Mo9、Co1.5、W0.6)规范 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS HR 240-1972 | 钴-铬-钨-镍-锰耐热合金板材、薄板材和带材(钴基、Cr20、W15、Ni10、Mn1.5)规范 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (cobalt base Cr 20, W 15 , Ni 10, Mn 1.5) |
| BS HR 40-1972 | 钴-铬-钨-镍-锰耐合金坯锭、棒材、锻件和零件(镍基、Cr20、W15、Ni10、Mn1.5)规范 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base, Cr 20, W 15, Ni 10, Mn 1.5) |
| BS HR 6-1972 | 镍-铬-铁-钼-钴-钨耐合金坯锭、棒材、锻件和零件(镍基、Cr21.7、Fe18.5、Mo9、Co1.5、W0.6)规范 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS ISO 7589-2002 | 摄影.感光测定用光源.日光、白炽钨丝和洗印机规范 | Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer |
| DIN 17562-2004 | 钨铁.交货技术条件 | Ferrotungsten - Technical delivery conditions |
| DIN 6830-1-1975 | 增光屏用X射线胶片；钨酸钙增光屏荧光射线感光模拟 | Medical X-ray films used with intensifying screens; sensitometric simulation of the fluorescent radiation of calcium tungstate intensifying screens |
| DIN EN 1668-1997 | 焊接助剂.合金钢和细晶粒钢的钨保护气体焊接用钢棒、钢丝和熔焊金属.分类 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification; German version EN 1668:1997 |
| DIN EN 60357-2003 | 卤钨灯(非车灯).性能规范 | Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002, modified); German version EN 60357:2003 + Corrigendum July 2003 |
| DIN EN 60432-1-2005 | 白炽灯.安全规范.第1部分:家用和类似场合普通照明用钨丝灯 | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999, modified + A1:2005); German version EN 60432-1:2000 + A1:2005 |
| DIN EN 60432-2-2006 | 白炽灯.安全性规范.第2部分:家用和类似场合普通照明用卤钨灯 | Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes (IEC 60432-2:1999, modified + A1:2005, modified); German version EN 60432-2:2000 + A1:2005 |
| DIN EN 60432-3-2005 | 白炽灯.安全规范.第3部分:钨卤灯(非车用) | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) (IEC 60432-3:2002 + A1:2005); German version EN 60432-3:2003 + A1:2005 |
| DIN EN 60682-1994 | 测量石英卤钨灯夹封部温度的标准方法 | Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps (IEC 60682:1980 + A1:1987); German version EN 60682:1993 |
| DIN EN 61047-2005 | 钨丝灯用直流或交流供电电子降压转换器.性能要求 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements (IEC 61047:2004); German version EN 61047:2004 |
| DIN EN 61558-2-9-2003 | 电力变压器、供电设备及类似设备安全性.第2-9部分:Ⅲ类手提钨丝灯变压器特殊要求 | Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002); German version EN 61558-2-9:2003 |
| DIN EN ISO 10650-1-2006 | 牙科学.动力聚合活化剂.第1部分:石英钨卤素灯 | Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps (ISO 10650-1:2004); German version EN ISO 10650-1:2005 |
| DIN EN ISO 6848-2005 | 电弧焊接和切割.非自耗钨电极.分类 | Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2004); German version EN ISO 6848:2004 |
| DIN EN ISO 9692-3-2001 | 焊接和相关工艺.焊缝准备推荐标准.第3部分:铝和铝合金的金属极惰性气体保护焊和钨极惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding und tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2001); German version EN ISO 9692-3:2001 |
| DIN ISO 13276-2003 | 烟草和烟草制品.烟碱纯度的测定.使用钨硅酸的重量分析法 | Tobacco and tobacco products - Determination of nicotine purity - Gravimetric method using tungstosilicic acid (ISO 13276:1997) |
| DIN ISO 5832-5-2001 | 外科植入物.金属材料.第5部分:.精制钴-铬-钨-镍合金 (ISO 5832-5:1993) | Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy (ISO 5832-5:1993) |
| DIN ISO 5832-8-2000 | 外科植入物.金属材料.第8部分:锻制钴镍铬钼钨铁合金 | Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy (ISO 5832-8:1997) |
| EN 1668-1997 | 焊接耗材 非合金和细晶粒钢的惰性气体保护钨极焊用焊条 焊丝和熔敷 分类 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification |
| EN 26848-1991 | 惰性气体保护电弧焊接以及等离子气体切割和焊接用的钨极 编码 | Tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding- Codification (ISO 6848:1984) |
| EN 60064-1995+A2-2003 | 家庭及类似场合普通照明用钨丝灯 性能要求 | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements (IEC 60064:1993, modified) |
| EN 60064/prA1-2000 | 家庭及类似场合普通照明用钨丝灯 性能要求 修改prA1 | Amendment 1 to IEC 60064: Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| EN 60357-2003 | 卤钨灯（非机动车辆用） | Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002, modified)) / Note: Endorsement notice |
| EN 60432-1-2000 | 白炽灯 安全规范 第1部分：家庭及类似场合普通照明用钨丝灯 | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999, modified) |
| EN 60432-2-2000 | 白炽灯 安全规范 第2部分：家庭及类似场合普通照明用卤钨灯 | Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes (IEC 60432-2:1999, modified) |
| EN 60432-3-2003 | 白炽灯 安全规范 第3部分：卤钨灯（非机动车辆用） | Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle) (IEC 60432-3:2002) / Note: Endorsement notice |
| EN 60598-2-6-1994+A1-1997 | 灯具 第2分：特殊要求 第6：内装变压器的钨丝灯灯具 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps (IEC 60598-2-6:1994) |
| EN 60682-1993+A2-1997 | 石英卤钨灯夹封部位温度标准测量方法 | Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps (IEC 60682:1980 + A1:1987) |
| EN 60809-1996+A1-1996+A2-2002 | 道路车辆用钨丝灯 尺寸 电和照明要求 | Filament lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:1995) / Note: To be amended by EN 60809/prA3 (2003-07). |
| EN 61047-1992+A1-1996+A22001 | 钨丝灯用交直流供电电子降压转换器 性能要求 | D.C. or a.c. supplied electronic step-down convertors for filament lamps; performance requirements (IEC 61047:1991) |
| EN 61558-2-9-2003 | 电力变压器、供电装置和类似产品的安全 第2-9部分：手持式三级钨丝灯变压器的特殊要求 | Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002) / Note: Endorsement notice |
| EN ISO 9692-3-2001 | 焊接和相关工艺 接头制备的建议 第3部分：铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) |
| GB 14196.1-2002 | 家庭和类似场合普通照明用钨丝灯安全要求 | Tungsten filament lamps for domestic and similar general lighting purposes--Safety specification |
| GB 14196.2-2002 | 家庭和类似场合普通照明用卤钨灯安全要求 | Tungsten halogen lamps for domestic and similar general lighting purposes--Safety specification |
| GB 16229-1996 | 车间空气中钨卫生标准 | Health standard for tungsten in the air of workplace |
| GB 19212.10-2007 | 电力变压器、电源装置和类似产品的安全 第10部分：III类手提钨丝灯用变压器的特殊要求 | () |
| GB 19510.3-2004 | 灯的控制装置第3部分:钨丝灯用直流/交流电子降压转换器的特殊要求 | Lamp controlgear--Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps |
| GB 7000.18-2003 | 钨丝灯用特低电压照明系统安全要求 | Safety requirements for extra low voltage lighting systems for filament lamps |
| GB 7000.6-1996 | 内装变压器的钨丝灯灯具的安全要求 | Safety requirements of luminaires with built-in trans-formers for filaments lamps |
| GB/T 10116-1988 | 仲钨酸铵 | Ammonium paratungstate |
| GB/T 10417-1989 | 碳化钨钢结硬质合金技术条件 | Technical conditions of steel-bonded tungsten carbides |
| GB/T 10418-2002 | 碳化钨钢结硬质合金横向断裂强度的测定 | Steel bonded tungsten carbides--Determination of transverse rupture strength |
| GB/T 10419-2002 | 碳化钨钢结硬质合金冲击韧度的测定 | Steel bonded tungsten carbides--Determination of impact toughness |
| GB/T 10420-2002 | 碳化钨钢结硬质合金洛氏硬度(C和A)的测定 | Steel bonded tungsten carbides--Determination of rockwell hardness(scales C and A) |
| GB/T 10681-2004 | 家庭和类似场合普通照明用钨丝灯性能要求 | Tungsten filament lamps for domestic and similar general lighting purposes--Performance requirements |
| GB/T 11845-1989 | 二氧化铀粉末和芯块中钨的测定分光光度法 | Uranium dioxide powder and pellets--Determination of tungsten--Spectrophotometric method |
| GB/T 12690.13-2003 | 稀土金属及其氧化物中非稀土杂质化学分析方法钼、钨量的测定电感耦合等离子体发射光谱法和电感耦合等离子体 | Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum |
| GB/T 13747.10-1992 | 锆及锆合金化学分析方法硫氰酸盐分光光度法测定钨量 | Zirconium and zirconium alloys--Determination of tungsten content--Thiocyanate spectrophotometric method |
| GB/T 14094-2005 | 卤钨灯(非机动车辆用)性能要求 | Tungsten halogen lamps(non-vehicle)Performance requirements |
| GB/T 14352.1-1993 | 钨矿石、钼矿石化学分析方法硫氰酸盐光度法测定钨量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of tungsten content--Potassium thiocynate photometric method |
| GB/T 14352.10-1993 | 钨矿石、钼矿石化学分析方法二乙基二硫代氨基甲酸银光度法测定砷量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of arsenic content--Silver diethyl-dithiocarbamate photometric method |
| GB/T 14352.11-1993 | 钨矿石、钼矿石化学分析方法火焰原子吸收分光光度法测定铋量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of bismuth content--Flame atomic absorption spectrometric method |
| GB/T 14352.12-1993 | 钨矿石、钼矿石化学分析方法甲基异丁基甲酮萃取火焰原子吸收分光光度法测定银量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of silver content--Flame atomic absorption spectrometric method after methyl-iso-butyl ketone extraction |
| GB/T 14352.13-1993 | 钨矿石、钼矿石化学分析方法盐酸-氯化铵底液极谱法测定锡量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of tin content--Polarographic method in hydrochloric acid-ammoninm chloride medium |
| GB/T 14352.14-1993 | 钨矿石、钼矿石化学分析方法乙酸丁酯萃取分离-罗丹明B光度法测定镓量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of gallium content--Rhodamine B photometric method after butylacetate extraction |
| GB/T 14352.15-1993 | 钨矿石、钼矿石化学分析方法蒸馏分离-苯芴酮-十六烷基三甲基溴化铵光度法测定锗量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of germanium content--Distillation separation-phenyl fluorone cetyltrimethyl-ammonium bromide photometric method |
| GB/T 14352.16-1993 | 钨矿石、钼矿石化学分析方法3，3’-二氨基联苯胺光度法测定硒量 | Methodsfor chemical analysis of tungsten ores and molybdenum ores--Determination of selenium content--3，3’-Diaminobenzidine photometric method |
| GB/T 14352.17-1993 | 钨矿石、钼矿石化学分析方法丁基罗丹明B光度法测定碲量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of tellurium content--Butyl-Rhodamine B photometric method |
| GB/T 14352.18-1993 | 钨矿石、钼矿石化学分析方法硫氰酸盐光度法测定铼量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of rhenium content--Potassium thiocynate photometric method |
| GB/T 14352.2-1993 | 钨矿石、钼矿石化学分析方法硫氰酸盐光度法测定钼量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of molybdenumcontent--Potassium thiocynate photometric method |
| GB/T 14352.3-1993 | 钨矿石、钼矿石化学分析方法火焰原子吸收分光光度法测定铜量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of coppercontent--Flame atomic absorption spectrometric method |
| GB/T 14352.4-1993 | 钨矿石、钼矿石化学分析方法火焰原子吸收分光光度法测定铅量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of lead content--Flame atomic absorption spectrometric method |
| GB/T 14352.5-1993 | 钨矿石、钼矿石化学分析方法火焰原子吸收分光光度法测定锌量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of zinc content--Flame atomic absorption spectrometric method |
| GB/T 14352.6-1993 | 钨矿石、钼矿石化学分析方法火焰原子吸收分光光度法测定镉量 | Methods forchemical analysis of tungsten ores and molybdenum ores--Determination of cadmium content--Flame atomic absorption spectrometric method |
| GB/T 14352.7-1993 | 钨矿石、钼矿石化学分析方法丁二肟-磺基水杨酸-氢氧化铵-氯化铵底液极谱法测定钴量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of cobalt content--Polarographic method in dimethylglyoxime-sulfosalicylic acid-ammonium hydroxide-ammonium chloride system |
| GB/T 14352.8-1993 | 钨矿石、钼矿石化学分析方法丁二肟-磺基水杨酸-氢氧化铵-氯化铵底液极谱法测定镍量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of nickel content--Polarographic method in dimethylglyoxime-sulfosalicylic acid-ammonium hydroxide-ammonium chloride system |
| GB/T 14352.9-1993 | 钨矿石、钼矿石化学分析方法高温燃烧碘量法测定全硫量 | Methods for chemical analysis of tungsten ores and molybdenum ores--Determination of totol sulfurcontent--Iodometric method after combustion |
| GB/T 14353.10-1993 | 铜矿石、铅矿石和锌矿石化学分析方法硫酸-苯羟乙酸-辛可宁-氯酸钾底液催化极谱法测定钨量 | Methods for chemical analysis of copper ores，lead ores and zinc ores--Determination of tungsten content--Catalytic polarographic method in sulfuric acid-phenylhydroxy acetic acid-cinchonine potassium chlorate system |
| GB/T 14501.3-1993 | 六氟化铀中钨、钼、铌、钛、锆的测定化学光谱法 | Spectrochemical determination of tungsten，molybdenum，niobium，titanium and zirconium in uranium hexafluoride |
| GB/T 14506.25-1993 | 硅酸盐岩石化学分析方法硫酸-苯羟乙酸-辛可宁-氯酸钾底液极谱法连续测定钼量和钨量 | Silicate rocks--Determination of molybdenum and tungsten content--Sulfuric acid-phenylhydroxyacetic acid-cinchonine-potassium chlorate medium polarographic method |
| GB/T 15061-1994 | 银盐感光材料感光测定通则第1 部分:适用于白炽钨光和模拟日光曝光的试样曝光条件 | General specifications for sensitometry of silver halide photographic materials--Part 1:Sensitometric exposure conditions of films to be exposured for incandescent tungsten and daylight |
| GB/T 15072.17-1994 | 贵金属及其合金化学分析方法铂合金中钨量的测定 | Platinum alloys--Determination of tungsten content |
| GB/T 15076.5-1994 | 钽铌化学分析方法钼量和钨量的测定 | Methods for chemical analysis of tantalum and niob-ium--Determination of molybdenum and tungsten contents |
| GB/T 16104-1995 | 车间空气中钨或碳化钨的硫氰酸钾-三氯化钛分光光度测定方法 | Workplace air--Determination of tungsten or tungsten carbide--Potassium thiocyanate-titanous trichloride spectrophotometric method |
| GB/T 1819.9-2004 | 锡精矿化学分析方法三氧化钨量的测定硫氰酸盐分光光度法 | Methods for chemical analysis of tin concentrates--Determination of tungsten trioxide content--The thiocyanate spectrophotometric method |
| GB/T 19654-2005 | 灯用附件钨丝灯用直流/交流电子降压转换器性能要求 | Auxiliaries for lamps--D.C.or A.C.supplied electronic step-down convertors for filament lamps Performance requirements |
| GB/T 20152-2006 | 石英卤钨灯压封部位温度的标准测量方法 | Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps |
| GB/T 21095-2007 | 飞机用钨丝灯 | () |
| GB/T 223.43-1994 | 钢铁及合金化学分析方法钨量的测定 | Methods for chemical analysis of iron，steel and alloy--Determination of tungsten content |
| GB/T 223.66-1989 | 钢铁及合金化学分析方法硫氰酸盐-盐酸氯丙嗪-三氯甲烷萃取光度法测定钨量 | Methods for chemical analysis of iron，steel and alloy--The thiocyanate chlorpromazine hydrochloride--chloro form extraction photometric method for the determination of tungsten content |
| GB/T 2967-1989 | 铸造碳化钨 | Cast tungsten carbide |
| GB/T 3457-1998 | 氧化钨 | Tungstic oxide |
| GB/T 3458-2006 | 钨粉 | Tungsten Powder |
| GB/T 3459-2006 | 钨条 | Tungsten bars and rods |
| GB/T 3648-1996 | 钨铁 | Ferrotungsten |
| GB/T 3654.9-1983 | 铌铁化学分析方法硫氰酸盐光度法测定钨量 | Methods for chemical analysisof ferroniobium--The thiocyanate photometric method for the determination of tungsten content |
| GB/T 3875-2006 | 钨板 | Tungsten sheet |
| GB/T 4181-1997 | 钨丝 | Tungsten wires |
| GB/T 4183-2002 | 钼钨合金丝 | Molybdenum-tungsten alloy wire |
| GB/T 4184-2002 | 钨铼合金丝 | Tungsten-rhenium alloy wires |
| GB/T 4185-1984 | 钼钨合金条 | Molybdenum-tungsten alloy bars |
| GB/T 4186-2002 | 钼钨合金杆 | Molybdenum-tungsten alloy rods |
| GB/T 4187-1984 | 钨杆 | Tungsten rods |
| GB/T 4189-1984 | 掺杂钨条 | Doped tungsten bars |
| GB/T 4192-1984 | 电真空器件及电光源用钨、钼材料电阻率的测试方法 | Method for the determination of the resistivity of tungsten and molybdenum used in electric light sources and vacuumtubes |
| GB/T 4193-1984 | 电真空器件及电光源用细钨丝、钼丝和薄带密度的测试方法 | Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuumtubes |
| GB/T 4194-1984 | 钨丝蠕变试验、高温处理及金相检查方法 | Creep testing，high temperature treatment and metallographic examination of the tungsten wires |
| GB/T 4195-1984 | 钨、钼粉末粒度分布测试方法(沉降天平法) | Method for measuring the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles |
| GB/T 4196-1984 | 钨、钼条密度测定方法 | Method for testing the density of tungsten and molybdenum bars |
| GB/T 4197-1984 | 钨钼及其合金的烧结坯条、棒材晶粒度测试方法 | Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys |
| GB/T 4295-1993 | 碳化钨粉 | Tungsten carbide powder |
| GB/T 4324.1-1984 | 钨化学分析方法方波极谱法连续测定铅、镉量 | Methods for chemical analysis of tungsten--The square wave polarographic method for the successive determination of lead and cadmium contents |
| GB/T 4324.10-1984 | 钨化学分析方法新酮试剂光度法测定铜量 | Methods for chemical analysis of tungsten--The neocuproine photometric method for the determination of copper content |
| GB/T 4324.11-1984 | 钨化学分析方法铬天青S光度法测定铝量 | Methods for chemical analysis oftungsten--The chromazurol S photometric method for the determination of aluminium content |
| GB/T 4324.12-1984 | 钨化学分析方法氯化-钼蓝光度法测定硅量 | Methods for chemical analysisof tungsten--The chlorization-molybdenum blue photometric method for the determination of silicon content |
| GB/T 4324.13-1984 | 钨化学分析方法乙二醛双 (2-羟基苯胺) 光度法测定钙量 | Methods for chemical analysis of tungsten--The glyoxal bis (2-hydroxyanil) photometric method for the determination of calcium content |
| GB/T 4324.14-1984 | 钨化学分析方法原子吸收分光光度法测定钙量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of calcium content |
| GB/T 4324.15-1984 | 钨化学分析方法偶氮氯膦Ⅰ光度法测定镁量 | Methods for chemical analysisof tungsten--The chlorophosphonazo Ⅰ photometric method for the determination of magnesium content |
| GB/T 4324.16-1984 | 钨化学分析方法原子吸收分光光度法测定镁量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of magnesium content |
| GB/T 4324.17-1984 | 钨化学分析方法原子吸收分光光度法测定钠量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of sodium content |
| GB/T 4324.18-1984 | 钨化学分析方法原子吸收分光光度法测定钾量 | Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of potassium content |
| GB/T 4324.19-1984 | 钨化学分析方法二安替比林甲烷光度法测定钛量 | Methods for chemical analysis of tungsten--The diantipyrylmethane photometric method for the determination of titanium content |
| GB/T 4324.2-1984 | 钨化学分析方法碘化钾-马钱子碱光度法测定铋量 | Methods for chemical analysis of tungsten--The potassium iodide-brucine photometric method for thedetermination of bismuth content |
| GB/T 4324.20-1984 | 钨化学分析方法钽试剂光度法测定钒量 | Methods for chemical analysis of tungsten--The N-benzoyl-N-phenylhydroxylamine photometric method for the determination of vanadium content |
| GB/T 4324.21-1984 | 钨化学分析方法二苯基碳酰二肼光度法测定铬量 | Methods for chemical analysis of tungsten--The diphenylcarbazide photometric method for the determination of chromium content |
| GB/T 4324.22-1984 | 钨化学分析方法甲醛肟分光光度法测定锰量 | Methods for chemical analysisof tungsten--The formaldoxime photometric method for manganese content |
| GB/T 4324.23-1984 | 钨化学分析方法燃烧-电导法测定硫量 | Methods for chemical analysis of tungsten--The combustion-conductometric titration method for the determination of suphur content |
| GB/T 4324.24-1984 | 钨化学分析方法铍为载带沉淀剂-钼蓝光度法测定磷量 | Methods for chemical analysis of tungsten--The berylium as carrier precipitation agent-molybdenum blue photometric method for the determination of phosphorus content |
| GB/T 4324.25-1984 | 钨化学分析方法惰气熔融库仑滴定法测定氧量 | Methods for chemical analysis of tungsten--The inert gas fusion-coulometric titration method for the determination of oxygen content |
| GB/T 4324.26-1984 | 钨化学分析方法奈氏试剂光度法测定氮量 | Methods for chemical analysis of tungsten--The Nessler reagent photometric method for the determination of nitrogen content |
| GB/T 4324.27-1984 | 钨化学分析方法燃烧-库仑滴定法测定碳量 | Methods for chemical analysisof tungsten--The combustion-coulometric titration method for the determinationof carbon content |
| GB/T 4324.28-1984 | 钨化学分析方法硫氰酸盐光度法测定钼量 | Methods for chemical analysis of tungsten--The thiocy anate photometric method for the determin-ation of molybdenum content |
| GB/T 4324.29-1984 | 钨化学分析方法重量法测定氯化挥发后残渣量 | Methods for chemical analysis of tungsten--The gravimetric method for the determination of residue content after chloride volatility |
| GB/T 4324.3-1984 | 钨化学分析方法聚乙二醇辛基苯基醚-苯荧光酮光度法测定锡量 | Methods forchemical analysis of tungsten--The polyethylene glycol octyl phenylether-phenylfluorone photometric method for the determination of tin content |
| GB/T 4324.30-1984 | 钨化学分析方法重量法测定灼烧损失量 | Methods for chemical analysis of tungsten--The gravimetric method for the determination of loss content on ignition |
| GB/T 4324.4-1984 | 钨化学分析方法孔雀绿光度法测定锑量 | Methods for chemical analysis of tungsten--The malachite green photometric method for the determination of antimony content |
| GB/T 4324.5-1984 | 钨化学分析方法钼蓝光度法测定砷量 | Methods for chemical analysis of tungsten--The molybdenum blue photometric method for the determination of arsenic content |
| GB/T 4324.6-1984 | 钨化学分析方法邻二氮杂菲光度法测定铁量 | Methods for chemical analysisof tungsten--The ortho-phenanthroline photometric method for the determination iron content |
| GB/T 4324.7-1984 | 钨化学分析方法钴试剂光度法测定钴量 | Methods for chemical analysis of tungsten--The 5-Cl-PADAB photometric method for the determination of cobalt content |
| GB/T 4324.8-1984 | 钨化学分析方法丁二酮肟光度法测定镍量 | Methods for chemical analysis of tungsten--The dimethylglyoxime photometric method for the determination of nickel content |
| GB/T 4324.9-1984 | 钨化学分析方法丁二酮肟重量法测定镍量 | Methods for chemical analysis of tungsten--The dimethylglyoxime gravimetric method for the determination of nickel content |
| GB/T 4325.28-1984 | 钼化学分析方法四苯砷氯盐酸盐-硫氰酸盐光度法测定钨量 | Methods for chemical analysis of molybdenum--The tetraphenyl arsonium chloride hydrochloride-thiocyanate photometric method for the determination of tungsten content |
| GB/T 4414-1984 | 包装钨精矿取样、制样方法 | Methods of sampling and sample preparation oftungsten concentrates in bags |
| GB/T 6150.1-1985 | 钨精矿化学分析方法钨酸铵灼烧法测定三氧化钨量 | Methods for chemical analysis of tungsten concentrates--The ammonium tungstate igniting gravimetric method for the determination of tungsten trioxide content |
| GB/T 6150.10-1985 | 钨精矿化学分析方法硫氰酸盐光度法测定钼量 | Methods for chemical analysis of tungsten concentrates--The thiocyanate photometric method for the determination of molybdenum content |
| GB/T 6150.11-1985 | 钨精矿化学分析方法原子吸收分光光度法测定铜量 | Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric methodfor the determination of copper content |
| GB/T 6150.12-1985 | 钨精矿化学分析方法 盐酸-氯化钠底液极谱法测定铅量 | Methods for chemical analysis of tungsten concentrates--The hydrochloric acid-sodium chloride supporting electrolyte polarographic method for the determination of lead content |
| GB/T 6150.13-1985 | 钨精矿化学分析方法 氢氧化铵-氯化铵底液极谱法测定锌量 | Methods for chemical analysis of tungsten concentrates--The ammonium hydroxide-ammonium chloride supporting electrolyte polarographic method for the determination of zinc content |
| GB/T 6150.14-1985 | 钨精矿化学分析方法钼蓝光度法测定二氧化硅量 | Methods for chemical analysis of tungsten concentrates--The molybdenum blue photometric method for the determination of silicon dioxide content |
| GB/T 6150.15-1985 | 钨精矿化学分析方法 DDTC-Ag光度法测定砷量 | Methods for chemical analysis of tungsten concentrates--The silver diethyldithiocarbamate photometric method for the determination of arsenic content |
| GB/T 6150.16-1985 | 钨精矿化学分析方法原子吸收分光光度法测定锰量 | Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric methodfor the determination of manganese content |
| GB/T 6150.17-1985 | 钨精矿化学分析方法半二甲酚橙光度法测定铋量 | Methods for chemical analysis of tungsten concentrates--The semi-xylenol orange photometric method for the determination of bismuth content |
| GB/T 6150.18-1985 | 钨精矿化学分析方法磺基水杨酸光度法测定铁量 | Methods for chemical analysis of tungsten concentrates--The sulphosalicylic acid photometric method for the determination of iron content |
| GB/T 6150.19-1985 | 钨精矿化学分析方法5-Br-PADAP光度法测定锑量 | Methods for chemical analysis of tungsten concentrates--The 2-(5-bromo-pyridylazo)-5-diethylaminophenol photometric method for the determination of antimony content |
| GB/T 6150.2-1985 | 钨精矿化学分析方法碘酸钾容量法测定锡量 | Methods for chemical analysisof tungsten concentrates--The potassium iodate volumetric method for the determination of tin content |
| GB/T 6150.3-1985 | 钨精矿化学分析方法 水杨基荧光酮-氯化十四烷基吡啶光度法测定锡量 | Methods for chemical analysis of tungsten concentrates--The salicylfluorone-tetradecyl pyridine chloride photo-metric method for the determination of tin content |
| GB/T 6150.4-1985 | 钨精矿化学分析方法钼黄光度法测定磷量 | Methods for chemical analysis of tungsten concentrates--The molybdenum yellow photometric method for the determination of phosphorus content |
| GB/T 6150.5-1985 | 钨精矿化学分析方法硫酸钡重量法测定硫量 | Methods for chemical analysisof tungsten concentrates--The barium sulfate gravimetric method for the determination of sulfur content |
| GB/T 6150.6-1985 | 钨精矿化学分析方法EDTA容量法测定钙量 | Methods for chemical analysis of tungsten concentrates--The EDTA volumetric method for the determination of calcium content |
| GB/T 6150.7-1985 | 钨精矿化学分析方法原子吸收分光光度法测定钙量 | Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric methodfor the determination of calcium content |
| GB/T 6150.8-1985 | 钨精矿化学分析方法重量法测定湿存水量 | Methods for chemical analysis of tungsten concentrates--The gravimetric method for the determination hygro-scopic moisture content |
| GB/T 6150.9-1985 | 钨精矿化学分析方法氯代磺酚S 光度法测定铌量丁基罗丹明B 萃取光度法测定钽量 | Methods for chemical analysis of tungsten concentrates--The chlorosulphophenol S photometric method for the determination niobium content--The butylrhodamine B extraction photometric method for the determination tantalum content |
| GB/T 7731.1-1987 | 钨铁化学分析方法辛可宁重量法测定钨量 | Methods for chemical analysis of ferrotungsten--The cinchonine gravimetric method for the determination of tungsten content |
| GB/T 7731.10-1988 | 钨铁化学分析方法红外线吸收法测定碳量 | Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of carbon content |
| GB/T 7731.12-1988 | 钨铁化学分析方法红外线吸收法测定硫量 | Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of sulfur content |
| GB/T 7731.13-1988 | 钨铁化学分析方法燃烧中和滴定法测定硫量 | Methods for chemical analysisof ferrotungsten--The combustion-neutralization titration method for the determination of sulfur content |
| GB/T 7731.14-1988 | 钨铁化学分析方法极谱法测定铅量 | Methods for chemical analysis of ferrotungsten--The polarographic method for the determination of lead content |
| GB/T 7731.15-1999 | 钨铁化学分析方法火焰原子吸收光谱法测定铜量 | Methods for chemical analysis of ferrotungsten--The flame atomic absorption spectrometric method for thedetermination of copper content |
| GB/T 7731.2-2007 | 钨铁 锰含量的测定 高碘酸盐分光光度法和火焰原子吸收光谱法 | () |
| GB/T 7731.3-1987 | 钨铁化学分析方法双环己酮草酰二腙光度法测定铜量 | Methods for chemical analysis of ferrotungsten--The bis (cyclohexanone) oxalyldihydrazone photometric method for the determination of copper content |
| GB/T 7731.4-1987 | 钨铁化学分析方法钼蓝光度法测定磷量 | Methods for chemical analysis of ferrotungsten--The molybdenum blue photometric method for the determination of phosphorus content |
| GB/T 7731.5-1987 | 钨铁化学分析方法钼蓝光度法测定硅量 | Methods for chemical analysis of ferrotungsten--The molybdenum blue photometric method for the determination of silicon content |
| GB/T 7731.6-1987 | 钨铁化学分析方法钼蓝光度法测定砷量 | Methods for chemical analysis of ferrotungsten--The molybdenum blue photometric method for the determination of arsenic content |
| GB/T 7731.7-1987 | 钨铁化学分析方法苯基荧光酮光度法测定锡量 | Methods for chemical analysis of ferrotungsten--The phenylfluorone photometric method for the determinationof tin content |
| GB/T 7731.8-1987 | 钨铁化学分析方法罗丹明B光度法测定锑量 | Methods for chemical analysis of ferrotungsten--The tetraethylrhodamine photometric method for the determination of antimony content |
| GB/T 7731.9-1987 | 钨铁化学分析方法碘化铋光度法测定铋量 | Methods for chemical analysis of ferrotungsten--The bismuth iodide photometric method for the determinationof bismuth content |
| GB/T 8320-2003 | 铜钨及银钨电触头 | Copper-tungsten and silver-tungsten electrical contacts |
| IEC 60064 AMD 1-2000 | 家庭及类似场合普通照明用钨丝灯.性能要求.修改件1 | Tungsten filament lamps for domestic and similar general ligthing purposes - Performance requirements; Amendment 1 |
| IEC 60064 AMD 2-2002 | 家用和类似用途的普通照明用钨丝灯.性能要求.修改件2 | Tungsten filament lamps for domestic and similar general ligthing purposes - Performance requirements; Amendment 2 |
| IEC 60064 AMD 3-2005 | 修改件3.家用及类似场合普通照明用钨丝灯.性能要求 | Amendment 3 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| IEC 60064 Edition 6.3-2005 | 家用和类似用途的普通照明用钨丝灯.性能要求 | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| IEC 60064-1993 | 家庭及类似场合普通照明用钨丝灯 性能要求 | Tungsten filament lamps for domestic and similar general ligthing purposes; performance requirements |
| IEC 60357 AMD 1-2006 | 卤钨灯(非车辆用).性能规范.修改件1 | Tungsten halogen lamps (non-vehicle) - Performance specifications; Amendment 1 |
| IEC 60357-2002 | 卤钨灯(非车辆用).性能规范 | Tungsten halogen lamps (non-vehicle) - Performance specifications |
| IEC 60432-1 AMD 1-2005 | 修改件1.白炽灯.安全规范.第1部分:家用和类似场合普通照明用钨丝灯 | Amendment 1 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| IEC 60432-1 Edition 2.1-2005 | 白炽灯.安全规范.第1部分:家用及类似场合普通照明用钨丝灯 | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| IEC 60432-1-1999 | 白炽灯 安全规范 第1部分:家庭及类似场合普通照明用钨丝灯 | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| IEC 60432-2 AMD 1-2005 | 修改件1.白炽灯.安全规范.第2部分:家用和类似场合普通照明用钨卤灯 | Amendment 1 - Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes |
| IEC 60432-2 Edition 2.1-2005 | 白炽灯.安全规范.第1部分:家用及类似场合普通照明用卤钨灯 | Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes |
| IEC 60432-2-1999 | 白炽灯 安全规范 第2部分:家庭及类似场合普通照明用卤钨灯 | Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
| IEC 60432-3 AMD 1-2005 | 修改件1.白炽灯.安全规范.第3部分:钨卤灯(非车用) | Amendment 1 - Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60432-3 Edition 1.1-2005 | 白炽灯.安全规范.第3部分:钨卤灯(非车用) | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60432-3-2002 | 白炽灯.安全规范.第3部分:卤钨灯(非车用) | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60598-2-23 AMD 1-2000 | 灯具 第2部分:特殊要求 第23节:钨丝灯用特低电压照明系统 修改1 | Luminaires - Part 2-23: Particular requirements - Extra low voltage lighting systems for filament lamps |
| IEC 60598-2-23-1996 | 灯具 第2部分:特殊要求 第23节:钨丝灯用特低电压照明系统 | Luminaires - Part 2: Particular requirements - Section 23: Extra low voltage lighting systems for filament lamps |
| IEC 60598-2-6 AMD 1-1996 | 灯具 第2部分:特殊要求 第6节:内装变压器的钨丝灯灯具 修改1 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps; Amendment 1 |
| IEC 60598-2-6 Interpretation Sheet 1-2001 | 灯具.第2部分:特殊要求.第6节:内装变压器的钨丝灯灯具 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
| IEC 60598-2-6-1994 | 灯具 第2部分:特殊要求 第6节:内装变压器的钨丝灯灯具 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
| IEC 60682 AMD 1-1987 | 石英卤钨灯夹封部位温度的标准测量方法 修改1 | Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps |
| IEC 60682 AMD 2-1997 | 石英卤钨灯夹封部位温度的标准测量方法 修改2 | Method of measuring the pinch temperature of quartz glass lamps; Amendment 2 |
| IEC 60682-1980 | 石英卤钨灯夹封部位温度的标准测量方法 | Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps |
| IEC 60809 AMD 1-1996 | 道路机动车辆用钨丝灯 尺寸、电及光的要求 修改1 | Filament lamps for road vehicles - Dimensional, electrical and luminous requirements; Amendment 1 |
| IEC 61047-2004 | 钨丝灯用交直流供电电子降压转换器.性能要求 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements |
| IEC 61558-2-9-2002 | 电力变压器、供电设备及类似设备的安全.第2-9部分:Ⅲ类手用钨丝灯的压变压器的特殊要求 | Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps |
| ISO 10650-1-2004 | 牙科学.动力聚合活化剂.第1部分:石英钨卤素灯 | Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps |
| ISO 13276-1997 | 烟草和烟草制品 烟碱纯度的测定 使用钨硅酸的重量分析法 | Tobacco and tobacco products - Determination of nicotine purity - Gravimetric method using tungstosilicic acid |
| ISO 13899-2-2005 | 钢.合金钢中钼、铌和钨含量的测定.感应耦合等离子体原子发射光谱法.第2部分:铌含量测定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of Nb content |
| ISO 4552-2-1987 | 铁合金 化学分析用样品的取制样 第2部分:钛铁、钼铁、钨铁、钽铁、铌铁和钒铁 | Ferroalloys; Sampling and sample preparation for chemical analysis; Part 2 : Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium |
| ISO 5450-1980 | 钨铁 规范和交货条件 | Ferrotungsten; Specification and conditions of delivery |
| ISO 553-1981 | 锰矿石 钒含量的测定 滴定法和磷钨钒酸盐光度法 | Manganese ores; Determination of vanadium content; Titrimetric method and phosphotungstovanadate photometric method |
| ISO 5832-5-2005 | 外科植入物.金属材料.第5部分:锻造钴铬钨镍合金 | Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy |
| ISO 5832-8-1997 | 外科植入物 金属材料 第8部分:锻造钴镍铬钼钨铁合金 | Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| ISO 636-2004 | 焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属.分类 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification |
| ISO 6848-2004 | 电弧焊和切割.非自耗钨电极.分类 | Arc welding and cutting - Nonconsumable tungsten electrodes - Classification |
| ISO 7100-1983 | 工业(包括食品)用磷酸 钒含量的测定 磷钨钒酸盐光谱法 | Phosphoric acid for industrial use (including foodstuffs); Determination of vanadium content; Phosphotungsten vanadate spectrometric method |
| ISO 7693-1984 | 钨铁 钨含量的测定 喹啉(Cinchonine)重量法 | Ferrotungsten; Determination of tungsten content; Cinchonine gravimetric method |
| ISO 9692-3-2000 | 焊接和相关工艺 接头制备的建议 第3部分:铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO/TS 13899-1-2004 | 钢.合金钢中钼、铌和钨含量的测定.感应耦合等离子原子发射光谱法.第1部分:钼含量的测定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 1: Determination of Mo content |
| ISO/TS 13899-3-2005 | 钢.合金钢中钼、铌和钨含量的测定.感应耦合等离子体原子发射光谱法.第3部分:钨含量的测定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of W content |
| JB/T 4107.2-1999 | 电触头材料化学分析方法 铜钨中铜含量的测定(碘量法) | () |
| JB/T 4107.4-1999 | 电触头材料化学分析方法 银钨中银含量的测定(碘量法) | () |
| JB/T 5336-1991 | 铜钨电触头用钨粉 技术条件 | () |
| JB/T 5401-1991 | 快速测量钢液温度用钨铼热电偶丝 | () |
| JB/T 5402-1991 | 快速测量钢液温度用钨铼热电偶丝 热电动势测试方法 | () |
| JB/T 7775.1-1995 | 铜钨碳化钨真空触头材料化学分析方法 碘量法测定铜量 | () |
| JB/T 7775.2-1995 | 铜钨碳化钨真空触头材料化学分析方法 络合滴定法测定铜量 | () |
| JB/T 7775.3-1995 | 铜钨碳化钨真空触头材料化学分析方法 气体容量法测定碳量 | () |
| JB/T 7778.1-1995 | 银碳化钨电触头材料化学分析方法 硫氰酸盐容量法测定银量 | () |
| JB/T 7778.2-1995 | 银碳化钨电触头材料化学分析方法 丁二酮肟分光光度法测定镍量 | () |
| JB/T 7778.3-1995 | 银碳化钨电触头材料化学分析方法 气体容量法测定总碳量 | () |
| JB/T 7778.4-1995 | 银碳化钨电触头材料化学分析方法 酸分离--气体容量法测定游离碳量 | () |
| JB/T 7779-1995 | 银碳化钨(12)石墨(3)电触头 技术条件 | () |
| JB/T 7855-1995 | 碳化钨钢结硬质合金自由锻件 技术条件 | () |
| JB/T 8747-1998 | 手工钨极惰性气体保护弧焊机(TIG焊机)技术条件 | () |
| JB/T 9185-1999 | 钨极惰性气体保护焊工艺方法 | () |
| JB/T 9440-1999 | 静电复印机定影卤钨灯管 | () |
| JB/T 9441-1999 | 静电复印机曝光卤钨灯管 | () |
| JB/T 9496-1999 | 钨铼热电偶用补偿导线 | () |
| JB/T 9497-2002 | 钨铼热电偶丝及分度表 | () |
| JB/T 9687.2-1999 | 电力半导体器件用钨圆片 | () |
| JB/T 9860.1-1999 | 断电器用钨触点 技术条件 | () |
| JB/T 9860.2-1999 | 断电器触点用钨杆 技术条件 | () |
| JIS C7501-2000 | 普通照明用钨丝灯 一般照明用電球 | Tungsten filament lamps for general lighting purposes |
| JIS C7527-2005 | 卤钨灯(非车辆用).性能规范 ハロゲン電球（自動車用を除く）―性能規定 | Tungsten halogen lamps (non-vehicle) -- Performance specifications |
| JIS C7551-1-2009 | 白炽灯安全规范.第1部分:家用和类似照明用途的钨丝灯 白熱電球類の安全仕様―第１部：一般照明用白熱電球 | Incandescent lamps -- Safety specifications -- Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| JIS C7551-2-2006 | 白炽灯.安全规范.第2部分:家用和类似照明用途的卤钨灯 白熱電球類の安全規定―第２部：一般照明用白熱電球と互換性のあるハロゲン電球 | Incandescent lamps -- Safety specifications -- Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
| JIS C7551-3-2005 | 白炽灯.安全规范.第3部分:卤钨灯(非机动车) 白熱電球類の安全規定―第３部：ハロゲン電球（自動車用を除く） | Incandescent lamps -- Safety specifications -- Part 3: Tungsten halogen lamps (non-vehicle) |
| JIS C7711-1991 | 白炽钨丝灯安装灯丝的命名方法 タングステン電球フィラメント継線形式の表し方 | Designation method for mounted filaments of incandescent tungsten lamps |
| JIS G1220-1994 | 钢铁.钨含量的测定方法 鉄及び鋼 ― タングステン定量方法 | Iron and steel -- Methods for determination of tungsten content |
| JIS G1316-1998 | 钨铁的化学分析方法 フェロタングステン分析方法 | Method for chemical analysis of ferrotungsten |
| JIS G1602-1998 | 铁合金化学分析取样方法(第2部分:钨铁、钼铁、钒铁、钛铁和铌铁合金) フェロアロイの成分用試料のサンプリング方法（その２ フェロタングステン，フェロモリブデン，フェロバナジウム，フェロチタン及びフェロニオブ） | Methods of sampling for chemical analysis of ferroalloys (Part 2: Ferrotungsten, ferromolybdenum, ferrovanadium, ferrotitanium and ferroniobium) |
| JIS G2306-1998 | 钨铁 フェロタングステン | Ferrotungsten |
| JIS H1282-1998 | 镍合金中钨含量的测定方法 ニッケル合金中のタングステン定量方法 | Methods for determination of tungsten in nickel alloys |
| JIS H1402-2001 | 钨粉及碳化钨粉的化学分析方法 タングステン粉及びタングステンカーバイド粉分析方法 | Methods for chemical analysis of tungsten powder and tungsten carbide powder |
| JIS H1402 AMD 1-2006 | 钨粉及碳化钨粉的化学分析方法（修改件1） タングステン粉及びタングステンカーバイド粉分析方法（追補１） | Methods for chemical analysis of tungsten powder and tungsten carbide powder (Amendment 1) |
| JIS H1403-2001 | 钨材料的化学分析方法 タングステン材料の分析方法 | Methods for chemical analysis of tungsten materials |
| JIS H1405-2001 | 加有氧化钍的钨丝材料的化学分析方法 トリエーテッドタングステン材料の分析方法 | Methods for chemical analysis of thoriated tungsten materials |
| JIS H1674-1992 | 锌和锌合金中钨含量的测定方法 ジルコニウム及びジルコニウム合金中のタングステン定量方法 | Methods for determination of tungsten in zirconium and zirconium alloys |
| JIS H2116-2002 | 钨粉及碳化钨粉 タングステン粉及びタングステンカーバイド粉 | Tungsten powder and tungsten carbide powder |
| JIS H2116 ERRATUM 1-2002 | 钨粉及碳化钨粉(勘误1) | Tungsten powder and tungsten carbide powder (Erratum 1) |
| JIS H4460-2002 | 照明及电子设备用钨和钼材料试验通则 照明及び電子機器用のタングステン及びモリブデン材料の試験通則 | General rules for test of tungsten and molybdenum materials for lighting and electronic equipments |
| JIS H4461-2002 | 照明和电子设备用钨丝 照明及び電子機器用のタングステン線 | Tungsten wires for lighting and electronic equipments |
| JIS H4463-2002 | 照明及电子设备用加有氧化钍的钨丝和棒 照明及び電子機器用のトリエーテッドタングステン線及び棒 | Thoriated tungsten wires and rods for lighting and electronic equipment |
| JIS K8612-1995 | 钨酸钠六二水合物 タングステン（ＶＩ）酸ナトリウム二水和物（試薬） | Sodium tungstate (VI) dihydrate |
| JIS M8128-1976 | 矿石中钨的测定方法 鉱石中のタングステン定量方法 | Methods for determination of tungsten in ores |
| JIS T7402-3-2005 | 外科植入物用钴基合金.第3部分:锻制的钴-铬-钨-镍合金 外科インプラント用コバルト基合金－第３部：コバルト－クロム－タングステン－ニッケル合金展伸材 | Cobalt based alloys for surgical implant applications -- Part 3: Wrought cobalt-chromium-tungsten-nickel alloy |
| JIS Z3233-2001 | 等离子切割和焊接用惰性气体保护弧焊用钨焊条 イナートガスアーク溶接並びにプラズマ切断及び溶接用タングステン電極 | Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding |
| JIS Z3233 ERRATUM 1-2001 | 惰性气体保护弧焊用钨焊条(勘误1) | (Erratum 1) |
| JIS Z3316-2001 | 低碳钢及低合金钢用惰性气体保护钨极电弧焊条及焊丝 軟鋼及び低合金鋼用ティグ溶加棒及びソリッドワイヤ | TIG welding rods and solid wires for mild steel and low alloy steel |
| NF A10-801-1971 | 钨铁的化学分析.硅的测定.重量法 | (CHEMICAL ANALYSIS OF FERRO-TUNGSTEN. GRAVIMETRIC DETERMINATION OF SILICON.) |
| NF A10-809-1984 | 钨铁的化学分析.钨的测定.重量法 | (Chemical analysis of ferro-tungsten. Gravimetric determination of tungsten.) |
| NF A10-813-1972 | 钨铁的化学分析.锡的测定.分光光度法 | (CHEMICAL ANALYSIS OF FERRO-TUNGSTEN. SPECTROPHOTOMETRIC DETERMINATION OF TIN.) |
| NF A81-011-1991 | 编号.用于惰性气体弧焊的钨电报和等离子切割 | (Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding. Codification.) |
| NF A81-325-1997 | 焊条.非合金钢和细晶粒钢制惰性气体保护钨焊接用棒材,线材和镀层 | (WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).) |
| NF A87-013-3-2001 | 焊接和相关工艺.接头预处理的推荐方法.第3部分:铝和铝合金的金属焊条惰性气体保护焊和钨极惰性气体保护焊 | (Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.) |
| NF C52-558-2-9-2003 | 电力变压器、供电设备及类似设备的安全.第2-9部分:Ⅲ类手用钨丝灯的变压器的特殊要求 | (Safety of power transformers, power supply units and similar products - Part 2-9 : particular requirements for transformers for class III handlamps for tungsten filament lamps.) |
| NF C72-100-1996 | 家用和类似用途的一般照明用钨丝灯.性能要求 | (Tungsten filamnet lamps for domestic and similar general lighting purposes. Performance requirements.) |
| NF C72-100/A2-2003 | 家用和类似用途普通照明用钨丝灯.性能要求 | (Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements.) |
| NF C72-101-1-2001 | 白炽灯安全规范.第1部分:家用和类似用途的一般照明用钨丝灯 | (Incandescent lamps - Safety specifications - Part 1 : tungsten filament lamps for domestic and similar general lighting purposes.) |
| NF C72-101-2-2001 | 白炽灯安全规范.第2部分:家用和类似一般照明用钨丝卤素灯 | (Incandescent lamps - Safety specifications - Part 2 : Tungsten halogen lamps for domestic and similar general lighting purposes.) |
| NF C72-101-3-2003 | 白炽灯.安全规范.第3部分:卤钨灯(非车用) | (Incandescent lamps - Safety specifications - Part 3 : tungsten-halogen lamps (non-vehicle).) |
| NF C72-104-1994 | 石英卤钨灯电极座温度测定的标准方法 | (Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps.) |
| NF C72-105-2003 | 卤钨灯(非车辆用).性能规范 | (Tungsten halogen lamps (non-vehicle) - Performance specifications.) |
| NF S94-055-1997 | 外科用植入物.金属材料.第5部分:锻制钴-铬-钨-镍合金 | (Implants for surgery. Metallic materials. Part 5 : wrought cobalt-chromium-tungsten-nickel alloy.) |
| NF S94-058-1998 | 外科植入物.金属材料.第8部分:锻压的钴镍铬钼钨铁合金 | (Implants for surgery. Metallic materials. Part 8 : wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy.) |
| NF V37-033-1997 | 烟草和烟草制品.尼古丁纯度的测定.使用钨硅酸的重量分析法 | (Tobacco and tobacco products. Determination of nicotine purity. Gravimetric method using tungstosilicic acid.) |
| QB/T 1116.2-2007 | 仪器灯泡 卤钨灯 | Instrument lamps-Tungsten halogen lamps |
| QB/T 3735-1999 | 绞合钨丝线圈 | Stranded tungsten wire coils |
| QB/T 3736-1999 | 石英卤钨灯夹封部位温度的标准测量方法 | Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps |
| YB/T 3220.9-1987(2005) | 宝钢二高炉设备制造通用技术条件 钴、铬、钨硬质合金堆焊（试行） | () |
| YS/T 231-2007 | 钨精矿 | Tungsten concentrate |
| YS/T 240.4-2007 | 铋精矿化学分析方法 三氧化钨量的测定 硫氰酸盐分光光度法 | Methods for chemical analysis of bismuth concentrate-Determination of tungsten trioxide content-Thiocyanate spectrophotometric method |
| YS/T 372.17-2006 | 贵金属合金元素分析方法 钨量和铼量的测定 钨酸重量法和硫脲分光光度法 | () |
| YS/T 374.7-1994(2005) | 铂钨铼合金化学分析方法 | () |
| YS/T 39-2007 | 氙灯钨阳极 | Tungsten anodes for xenon lamps |
| YS/T 500-2006 | 钨铈合金中铈的测定 氧化还原容量法 | () |
| YS/T 501-2006 | 钨钍合金中二氧化钍的测定 重量法 | () |
| YS/T 502-2006 | 钨铼合金中铼的测定 丁二酮肟比色法 | () |
| YS/T 508-2006 | 钨钼合金化学分析方法 EDTA容量法测定钼量 | () |
| YS/T 511-2006 | 钴包碳化钨复合粉 | () |
| YS/T 515-2006 | 钨丝下垂试验方法 | () |
| YS/T 516-2006 | 钨丝二次再结晶温度测量方法 | () |
| YS/T 524-2006 | 合成白钨技术条件 | () |
| YS/T 539.11-2006 | 镍基合金粉化学分析方法 辛可宁重量法测定钨量 | () |
| YS/T 555.8-2006 | 钼精矿化学分析方法 钨量的测定 | () |
| YS/T 559-2006 | 钨的发射光谱分析方法 | () |
| YS/T 659-2007 | 钨及钨合金加工产品牌号和化学成分 | Designation and composition of tungsten and tungsten alloy wrought product |
| 编号 | 中文名称 日本語標題 | 英文名称 |