| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI ATIS0300220-2005 | 通讯业制造商,供应商,及相关服务公司的信息交流表示法 | Representation of the Communications Industry Manufacturers, Suppliers, and Related Service Companies for Information Exchange |
| ANSI ATIS0300251-2007 | 信息交流用服务供应商的识别代码 | Codes for Identification of Service Providers for Information Exchange |
| ANSI C37.06-2000 | 开关装置.对称电流限定的交流高压断路器.优先额定值和相应要求性能 | Switchgear – AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis – Preferred Ratings and Related Required Capabilities |
| ANSI C37.06a-1989 | 开关装置.对称电流限定的交流高压断路器.优先额定值和相应要求性能 | Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities |
| ANSI C37.17-1997 | 交流和通用直流低压电力断路器的断开装置 | Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit Breakers |
| ANSI C37.22-1997 | 用于金属封闭开关设备的室内交流电中压开关优选额定值和相关要求性能 | Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear |
| ANSI C37.50-1989 | 开关设备.封装式低压交流电力线路断路器.试验程序 | Switchgear – Low-Voltage AC Power Circuit Breakers Used in Enclosures – Test Procedures |
| ANSI C37.51-2003 | 金属封装低压交流电力断路器开关设备组件.合格试验规程 | Metal-Enclosed Low-Voltage AC Power-Circuit-Breaker Switchgear Assemblies - Conformance Test Procedures |
| ANSI C37.54-2003 | 金属封装开关组件中作为可拆除元件的室内交流高压断路器的一致性试验程序 | Conformance Test Procedures for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies |
| ANSI C37.58-2003 | 金属封装的开关设备中使用的室内交流中压开关的一致性试验程序 | Conformance Test Procedures for Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear |
| ANSI C37.85-2002 | 电力开关用交流高压电力真空断路器的X射线辐射极限 | Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum |
| ANSI/ACCA 10Manual SPS-2010 | 游泳池和温泉用机械系统.注:正式标题为:游泳池和温泉用高压交流电 | Mechanical Systems for Swimming Pools and Spas. Note: Formally Titled "HVAC for Swimming Pools and Spas" |
| ANSI/ASTM A343-1997 | 电源频率下用瓦特计-安培计-伏特计法和25厘米艾普斯亭(EPSTEIN)机架测定材料交流电磁性能的方法 | Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-Cm Epstein Test Frame |
| ANSI/ASTM A346-1974 | 迪特利(Dieterly)电桥法测定迭片铁芯样品的交流电磁性能的方法 | Test Method for Alternating-Current Magnetic Performance of Laminated Core Specimens Using the Dieterly Bridge Method |
| ANSI/ASTM A697-1998 | 伏特计-安培计-瓦特计测定叠层铁芯样品交流电磁特性的方法 | Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using the Voltmeter-Ammeter-Wattmeter Methods |
| ANSI/ASTM A804/A 804M-1999 | 在电源频率下用薄钢板试样测试材料交流磁特性的方法 | Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens |
| ANSI/ASTM A889-1997 | 低感应条件下用万用表和25厘米艾普斯亭(Epstein)框测定材料交流磁特性的方法 | Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame |
| ANSI/ASTM A912-1993 | 用万用表测试非晶材料环形样品在电源频率下交流磁特性的方法 | Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Rodial Specimens |
| ANSI/ASTM A932-2001 | 使用万用表在电源频率下测试片状试样非晶材料交流电磁特性的方法 | Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens |
| ANSI/ASTM A966-1996 | 用交流电流检验钢锻件磁粒的试验方法 | Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current |
| ANSI/ASTM D150-1998 | 实心电绝缘材料的交流损耗特性和电容率(介电常数)的试验方法 | Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials |
| ANSI/ASTM F2361-2009 | 船用低压≤1000V交流电动机调整用指南.发动机≤500马力 | Guide for Ordering Low Voltage 1000 Vac or Less Alternating Current Electric Motors for Shipboard Service - Up to and Including Motors of 500 Horsepower |
| ANSI/EIA 454-1978 | 交流用非聚氯联苯浸渍的固定纸介质和纸-薄膜介质电容器 | Fixed Paper and Film-Paper Dielectric Capacitors with Non-PCB Impregnants for Alternating Current Applications |
| ANSI/EIA 495-A-1989 | 交流电用带镀金属纸引线薄膜介质电容器 | Film Dielectric Capacitors with Metallized Paper Electrodes for Alternating Current Applications |
| ANSI/EIA 580BA00-1997 | 空白详细规范:固定金属引线薄膜介电交流电容器 | Blank Detail Specification: Fixed Metallized Electrode Film Dielectric AC Capacitors |
| ANSI/EIA-463-B-2003 | 重型(1型)和轻型(2型)交流电动机起动用固定铝电解电容器 | Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum |
| ANSI/IEEE 1067-2005 | 765kV及以下交流电压用导电服的使用、保养、维修和试验指南 | Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC |
| ANSI/IEEE 1204-1997 | 端接在低短路容量交流系统的直流链路的设计指南.第1部分:交流/直流互相作用现象.第2部分:计划指南 | Guide for Planning DC Links Terminating at AC Locations Having Low Short-Circuit Capacities, Part I: AC/DC Interaction Phenomena, Part II: Planning Guide |
| ANSI/IEEE 1247-2005 | 额定电压大于1000伏的交流断路开关标准 | Standard for Interrupter Switches for Alternating Current, Rated Above 1000 Volts |
| ANSI/IEEE 1312-1993 | 电力系统.标称工作电压在230千伏以上的交流电力系统和设备用优选电压额定值 | Standard Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal |
| ANSI/IEEE 1453-2004 | 交流电力系统的电压闪变测量和限值推荐规程 | Recommended Practice for Measurement and Limits of Voltage Flicker on AC Power Systems |
| ANSI/IEEE 1547.3-2007 | 分配资源与电力系统互连的监控、信息交流和控制导则 | Guide for Monitoring, Information Exchange, and Control of Distributed Resources Interconnected with Electric Power Systems |
| ANSI/IEEE 1566-2006 | 额定电压大于等于375kW的可调速交流(AC)驱动器的性能标准 | Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger |
| ANSI/IEEE 1776-2009 | 采用定型缠绕的预绝缘定子线圈的交流电机密封或非密封绝缘系统的热量评定推荐操作 | Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15000 V and Below |
| ANSI/IEEE 275-1993 | 采用模绕预绝缘定子线圈的交流电机绝缘系统的热量评定推荐规程 | Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Recommended Practice for |
| ANSI/IEEE 434-2006 | 交流电机额定电压≥2300V的绝缘系统功能评估用指南 | Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
| ANSI/IEEE 48-2009 | 应用在额定电压为2.5kV到765kV层叠的或者额定电压为2.5kV到500kV挤包绝缘屏蔽电缆的交流电缆终端用要求及试 | Standard for Test Procedures and Requirements for Alternating Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV Through 765 kV or Extruded Insulation Rated 2.5 kV Through 500 kV |
| ANSI/IEEE 522-2004 | 交流旋转电机用模绕定子线圈的匝间绝缘试验指南 | Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines |
| ANSI/IEEE 551-2006 | 工业和商用电力系统计算交流短路电流的推荐方法 | Recommended Methods for Calculating AC Short-Circuit Currents in Industrial and Commercial Power Systems |
| ANSI/IEEE 644-1994 | 交流电力线工频电场和磁场的测量程序 | Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines |
| ANSI/IEEE 80-2000 | 交流变电站接地安全性 | AC Substation Grounding, Safety in |
| ANSI/IEEE 802.15.4a-2007 | 信息技术标准.电信和系统间的信息交流.局域网和城域网.特殊要求.第15.4部分:低速率无线个人区域网(WPANs)用 | Standard for Information Technology - Telecommunications and Information Exchange Between Systems – Local and Metropolitan Area Networks - Specific Requirements – Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications f |
| ANSI/IEEE 802.17-2005 | 信息技术标准.电信和系统间的信息交流.局域网和城域网.特殊要求.第17部分:弹性分组环(RPR)访问法和物理层规 | Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method & Physical Layer Specifications |
| ANSI/IEEE 802.17b-2007 | 信息技术标准.电信和系统间的信息交流.局域网和城域网.特殊要求.第17部分:弹性分组环(RPR)访问法和物理层规 | Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer Specifications - Amen |
| ANSI/IEEE 95-2002 | 带直流高压的交流(AC)电机(2300V及以上)的绝缘测试用推荐实施规范 | Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) with High Direct Voltage |
| ANSI/IEEE 958-2003 | 发电站中2400至13800V辅助系统上可调速交流传动装置的应用指南 | Guide for Application of AC Adjustable-Speed Drives on 2,400 to 13,800 Volt Auxiliary Systems in Electric Power Generating Stations |
| ANSI/IEEE C37.010-1999 | 基于对称电流的交流高压断路器应用指南 | Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/IEEE C37.011-2005 | 交流高压断路器瞬时恢复电压的应用指南 | Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.012-2005 | 交流高压断路器用电容性电流开关的应用指南 | Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.013-1997 | 基于对称电流的额定交流高压发电机断路器用标准 | Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/IEEE C37.016-2006 | 额定电压为15.5kV-245kV的交流电流(AC)高压电路开关标准 | Standard for AC High-Voltage Circuit Switchers rated 15.5 kV through 245 kV |
| ANSI/IEEE C37.04 Corrigendum 1-2009 | 交流高压断路器的标准等级结构.勘误表1 | Standard Rating Structure for AC High-Voltage Circuit Breakers - Corrigendum 1 |
| ANSI/IEEE C37.04-1999 | 交流高压断路器用标准额定结构 | Standard Rating Structure for AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.04b-2009 | 基于对称电流的交流高压断路器的额定结构用IEEE标准.瞬时恢复电压的说明改变为与标准IEC 62271-100一致的修 | IEEE Standard for Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment to Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100 |
| ANSI/IEEE C37.06-2009 | 基于对称电流的额定交流高压断路器用标准.电压高于1000伏特用优选额定值及其相关要求的功率 | Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities for Voltages above 1000 Volts |
| ANSI/IEEE C37.082-1982 | 交流电流断路器声压级的测量 | Standard Methods for the Measurement of Sound Pressure Levels for AC Power Circuit Breakers |
| ANSI/IEEE C37.083-1999 | 交流高压断路器的合成电容电路开关试验指南 | Guide for Synthetic Capacitive Switching Tests of AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.09-1999 | 基于对称电流的额定交流高压断路器用标准试验程序 | Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis [Also C37.09a-2005 and C37.09-1999/Cor1-2007] |
| ANSI/IEEE C37.09-1999/Cor 1-2007 | 基于平衡电流的交流高压电路断路器的标准试验规程.技术勘误1 | Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Corrigendum 1 |
| ANSI/IEEE C37.09a-2005 | 基于对称电流的交流(AC)高压断路器标准试验程序.修改件1:电容电流开关 | Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching |
| ANSI/IEEE C37.102-2006 | 交流发电机保护指南 | Guide for AC Generator Protection |
| ANSI/IEEE C37.104-2002 | 交流配电线和输电线用户线断路器自动重闭指南 | Guide for Automatic Reclosing of Line Circuit Breakers for AC Distribution and Transmission Lines |
| ANSI/IEEE C37.13-2008 | 外壳用低压交流电力断路器标准 | Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
| ANSI/IEEE C37.16-2009 | 低压交流(635V及以下)和直流(3200V及以下)电力断路器的优选额定值,相关要求和应用建议的标准 | Standard for Preferred Ratings, Related Requirements, and Application Recommendations for Low-Voltage AC (635V and Below) and DC (3200V and Below) Power Circuit Breakers |
| ANSI/IEEE C37.20.4-2001 | 金属外壳开关设备用室内交流开关(1kV-38kV)标准 | Standard for Indoor AC Switches (1 kV - 38 kV) for Use in Metal-Enclosed Switchgear |
| ANSI/IEEE C37.27-2009 | 与单独安装的限流熔丝一起使用的低压交流电源断路器应用指南 | Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately Mounted Current-Limiting Fuses |
| ANSI/IEEE C37.41-2008 | 交流电源盒配电系统用高压＞1000V保险丝、保险丝和断开断路器、附单极空气开关外壳的配电、保险丝断开开关 | Standard Design Tests for High-Voltage (1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories for Use on AC Power and Distribution Systems |
| ANSI/IEEE C37.60-2003 | 交流系统用架空、座垫安装式、干燥地下室型和浸没式自动电路重合闸和故障断路器的要求 | Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems, Requirements for Overhead, Pad-Mounted, Dry Vault, and Submersible |
| ANSI/IEEE C37.60-2003/Cor 1-2004 | 38kV及以下交流系统用架空底座安装型、干燥地下室型和浸入式电路自动重合开关和故障断路器的要求标准 | Standard Requirements for Overhead Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV - Corrigendum 1 |
| ANSI/IEEE C37.63-2005 | 交流系统用架空、底座安装型、干拱顶和水中线路自动分段器的要求 | Line Sectionalizers for Alternating-Current Systems, Requirements for Overhead, Pad-Mounted, Dry Vault and Submersible Automatic |
| ANSI/IEEE C37.66-2005 | 交流电系统(1 to 38 kV)用电容器开关的标准要求 | Standard Requirements for Capacitor Switches for Alternating-Current Systems (1 to 38 kV) |
| ANSI/IEEE C37.71-2001 | 三相交流电系统亚层负载断开开关手工操作要求 | Three Phase, Manually Operated Subsurface Load Interrupting Switches for Alternating-Current Systems, Requirements for |
| ANSI/IEEE C37.74-2003 | 38kv及以下的交流系统用地下、地下室及底座安装型负载中断开关设备和熔融中断开关设备的标准要求 | Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV |
| ANSI/IEEE C37.96-2000 | 交流电动机保护指南 | Guide for AC Motor Protection |
| ANSI/IEEE C62.11-2005 | 交流电源电路用金属氧化物避雷器标准 | Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV) |
| ANSI/IEEE C62.11a-2008 | 交流电源电路(大于1kV)用金属氧化电涌放电器的标准.修改件:电站、中间装置和配电放电器用短路试验 | Standard for Metal-Oxide Surge Arresters for AC Power Circuits ( 1 kV) - Amendment: Short-Circuit Tests for Station, Intermediate and Distribution Arresters |
| ANSI/IEEE C62.21 Cor 1-2008 | 交流旋转机械≥1000伏特的电涌保护设备的应用指南.技术勘误:替代表2和附录A.1和A.2 | Guide for the Application of Surge Protective Equipment on AC Rotating Machinery 1000 Volts and Greater - Corrigendum 1: Replace Table 2 and Annexes A.1 and A.2 |
| ANSI/IEEE C62.21-2003 | 1000V及以上的交流旋转电机上浪涌电压保护设备的应用指南 | Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater (including IEEE C62.21/Cor1-2008) |
| ANSI/IEEE C62.22-2009 | 交流系统中金属氧化物电涌放电器应用指南 | Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems |
| ANSI/IEEE C62.41.1-2002 | 低压(1000V及1000V以下)交流电力电路的电涌环境指南 | Guide on the Surge Environment in Low-Voltage (1000 V and Less) AC Power Circuits |
| ANSI/IEEE C62.41.2-2002 | 低压(1000 V和其以下)的交流电路的电涌特性推荐规范 | Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits |
| ANSI/IEEE C62.45-2002 | 与低压交流电路连接的设备的电涌试验指南 | Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and Less) AC Power Circuits |
| ANSI/IEEE C62.62-2000 | 低压交流电路电涌保护装置试验规范 | Test Specifications for Surge-Protective Devices for Low Voltage AC Power Circuits |
| ANSI/IEEE C62.72-2007 | 低压(1000V或1000V以下)交流电力电路用过电压保护装置的应用指南 | Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits |
| ANSI/SCTE 110-2005 | 混合光纤同轴室外设备状态监控:HMS发射机应答器用发射机应答器接口总线的交流动力供应（PSTIB） | Hybrid Fiber Coax Outside Plant Status Monitoring: Alternative Power Supply to Transponder Interface Bus (PSTIB) for HMS Transponders |
| ANSI/SCTE 16-2001 | 交流声调制的试验程序 | Test Procedure for Hum Modulation |
| ANSI/SCTE 46-2007 | 交流和直流电源的试验方法 | Test Method for AC to DC Power Supplies |
| ANSI/UL 347-2009 | 中压交流接触器,控制器及监控中心标准 | Standard for Medium-Voltage AC Contactors, Controllers, and Control Centres |
| ASNI C92.2-1987 | 标称工作电压大于230kV的交流电气系统和设备用电力系统.首选电压额定值 | for power systems-alternating-current electrical systemsand equipment operating at voltagesabove 230 kV nominal -preferred voltage ratings |
| ASTM D150-1998(2004) | 固体电绝缘材料(恒定电介质)的交流损耗特性和介电常数的标准试验方法 | Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation |
| ASTM E2261-2007 | 用交流电场测量技术检验焊缝的标准实施规程 | Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
| IEEE 1067-1996 | 765kV以下交流电压使用的导电衣的使用,检修,维护和试验指南 | (Guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765 kV ac and ?750 kV dc) |
| IEEE 1107-1996 | 交流电动机使用固定片散绕线圈用密封隔热系统的评定 | (Thermal evaluation of sealed insulation systems for AC electric machinery employing random-wound stator coils) |
| IEEE 117-1974 | 不规则缠绕交流电机绝缘材料系统的评定试验程序 | (Test procedure for evaluation of systems of insulation materials for random-wound ac electric machinery) |
| IEEE 1204-1997 | 端接在低短路能力交流场所的直流线路的设计指南 | (Guide for planning DC links terminating at AC locations having low short-circuit capacities) |
| IEEE 275-1992 | 交流电机绝缘系统的热评定推荐规程.额定电压6900V及以下电机模绕预绝缘定子线圈的使用 | (Recommended practice for thermal evaluation of insulation systems for alternating-current electric machinery; employing form-wound preinsulated stator coils for machines rated 6900 V and below) |
| IEEE 48-1996 | 2.5KV-765KV高压交流电缆终端的试验程序和要求 | (Test procedures and requirements for alternating-current cable terminations 2.5 kV through 765 kV) |
| IEEE 522-1992 | 交流旋转电机模绕定子线圈匝间绝缘的试验指南 | (Guide for testing turn-to-turn insulation on form-wound stator coils for alternating-current rotating electric machines) |
| IEEE 56-1977 | 大型交流旋转电机(10kVA及以上)绝缘维护指南 | (Guide for insulation maintenance of large ac rotating machinery (10000 kVA and larger)) |
| IEEE 644-1994 | 交流电力线路工业频率电场和磁场的测量方法 | (Measurement of power frequency electric and magnetic fields from AC power lines) |
| IEEE 80-2000 | 交流变电站接地安全指南 | (Guide for safety in AC substation grounding) |
| IEEE 95-2002 | 带直流高压的交流电动机械(2300V及以上)的绝缘试验操作规程 | (Practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage) |
| IEEE C 37.010-1999 | 基于平衡电流的额定交流高压断路器应用指南 | (Application guide for AC high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.011-1994 | 基于平衡电流的额定交流高压断路器瞬变恢复电压应用指南 | (Application guide for transient recovery voltage for ac high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.012-1979 | 基于平衡电流的额定交流高压断路器电容电流转换的应用指南 | (Application guide for capacitance current switching for ac high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.013-1997 | 基于平衡电流的交流高压发电机断路器 | (AC high-voltage generator circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.04-1999 | 交流高压断路器的额定结构 | (Rating structure for ac high-voltage circuit breakers) |
| IEEE C 37.04a-2003 | 基于平衡电流的交流高压断路器的额定结构.修改件1:电容电流开关 | (Rating structure for AC high-voltage circuit breakers rated on an symmetrical current basis - Amendment 1: Capacitance current switching) |
| IEEE C 37.081-1981 | 按平衡电流标定的交流高压断路器的综合故障检测指南 | (Guide for synthetic fault testing of ac high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.081a-1997 | 额定在均衡电流基础上的交流高压断路器模拟故障试验指南补充.8.3.2:终端故障恢复电压.不平衡短路电流 | (Supplement to guide for synthetic fault testing of AC high-voltage circuit breakers rated on a symmetrical current basis - 8.3.2: Recovery voltage for terminal faults - Asymmetrical short-circuit curr) |
| IEEE C 37.082-1982 | 交流电源断路器声压电平的测量方法 | (Methods for the measurement of sound pressure levels of ac power circuit breakers) |
| IEEE C 37.083-1999 | 交流高压电路断路器的合成电容电路开关试验指南 | (Guide for synthetic capacitive current switching tests of AC high-voltage circuit breakers) |
| IEEE C 37.09-1999 | 基于平衡电流的额定交流高压断路器的试验程序 | (Test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.102-1995 | 交流发电机保护指南 | (Guide for ac generator protection) |
| IEEE C 37.104-2002 | 交流配电线和输电线用线路断路器的自动重闭指南 | (Guide for automatic reclosing of line circuit breakers for AC distribution and transmission lines) |
| IEEE C 37.13-1990 | 封装的低压交流电源断路器 | (Low-voltage ac power circuit breakers used in enclosures) |
| IEEE C 37.20.4-2001 | 金属封装开关装置中使用的室内交流开关(1kV--38kV) | (Indoor AC switches (1kV - 38kV) for use in metal-enclosed switchgear) |
| IEEE C 37.27-1987 | 低电压交流非整体熔断电源断路器(使用分开安装的限流熔断器)的应用指南 | (Application guide for low-voltage ac nonintegrally fused power circuit breakers (using separately mounted current-limiting fuses)) |
| IEEE C 37.29-1981 | 盒装的低压电压交流电源电路保护器 | (Low-voltage ac power circuit protectors used in enclosures) |
| IEEE C 37.37-1996 | 交流高压空气开关加载指南(超过1000V) | (Loading guide for AC high-voltage air switches (in excess of 1000 V)) |
| IEEE C 37.60-2003 | 不大于38kV的交流系统用架空、底座安装型、干燥地下室型和浸没式电路自动重合闸和故障断路器的要求 | (Requirements for overhead, pad-mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV) |
| IEEE C 37.63-1997 | 交流系统用架空,有垫,干拱顶和水中线路自动分段器的要求 | (Requirements for overhead, pad-mounted, dry-vault, and submersible automatic line sectionalizers for ac systems) |
| IEEE C 37.71-2001 | 交流系统用三相手工操作的地下负载隔离开关 | (Three-phase, manually operated subsurface and vault load-interrupting switches for alternating-current systems) |
| IEEE C 37.74-2003 | 38kv及以下的交流系统用地下、地下室及底座安装型负载中断开关设备和熔融负载中断开关设备的标准要求 | (Requirements for subsurface, vault, and pad-mounted load-interrupter switchgear and fused load-interrupter switchgear for alternating current systems up to 38 kV) |
| IEEE C 37.96-2000 | 交流电动机保护指南 | (Guide for AC motor protection) |
| IEEE C 62.11-1999 | 交流电源电路金属氧化物电涌放电器 | (Metal-oxide surge arresters for AC power circuits () |
| IEEE C 62.22-1997 | 交流系统中金属氧化物电涌放电器应用指南 | (Guide for the application of metal-oxide surge arresters for alternating-current systems) |
| IEEE C 62.41-1991 | 低压交流电源电路中电涌电压推荐规程 | (Recommended practice on surge voltage in low-voltage ac power circuits) |
| IEEE C 62.41.1-2002 | 低压(1000V及1000V以下)交流电力电路电涌环境指南 | (Guide on the surge environment in low-voltage (1000 V and less) ac power ciruits) |
| IEEE C 62.41.2-2002 | 低压(1000V及1000V以下)交流电力网中电涌特性规程 | (Practice on characterization of surges in low-voltage (1000 V and less) ac power circuits) |
| IEEE C 62.45-2002 | 与低压交流电路连接的设备用电涌试验规程 | (Practice on surge testing for equipment connected to low-voltage (1000 V and less) ac power circuits) |
| IEEE C 62.62-2000 | 低电压交流线路的电涌保护装置的标准试验规范 | (Standard test specifications for surge-protective devices for low-voltage AC power circuits) |
| UL 1066-1997 | 外壳内用的低压交流和直流电力断路器 | (Low-voltage AC and DC power circuit breakers used in enclosures ) |
| UL 1112-1997 | 船用电动机和发电机(启动、外驱动倾角、配平片、发电机、交流发电机) | (Marine electric motors and generators (cranking, outdrive tilt, trim tab, generators, alternators) ) |
| 编号 | 中文名称 | 英文名称 |