编号 | 中文名称 | 英文名称 |
ANSI ATIS0600003-2007
| 蓄电池外壳及其空间/面积
| Battery Enclosures and Rooms/Areas
|
ANSI C18.1M Part 1-2005
| 干电池和电池组.规范
| Dry Cells and Batteries - Specifications
|
ANSI C18.1M Part 2-2003
| 有水溶电解质的便携式原电池和蓄电池组.安全标准
| Portable Primary Cells and Batteries with Aqueous Electrolyte - Safety Standard
|
ANSI C18.1M-1994
| 干电池和蓄电池的规范
| Dry Cells and Batteries - Specifications
|
ANSI C18.2M Part 1-2007
| 便携式可充电电池用标准.总则和规范
| Standard for Portable Rechargeable Cells and Batteries - General and Specifications
|
ANSI C18.2M Part 2-2007
| 便携式可再充电电池.安全标准
| Portable Rechargeble Cells and Batteries - Safety Standard
|
ANSI C18.2M-1997
| 电池组.密封可再充电的镍镉圆柱形裸露的和有外壳的蓄电池
| Batteries - Sealed Rechargeable (Secondary) Nickel-Cadmium Cylindrical Bare Cells and Jacketed Batteries
|
ANSI C18.3M Part 1-2005
| 便携式锂原电池和电池组.总则和规范
| Portable Lithium Primary Cells and Batteries - General and Specifications
|
ANSI C18.3M Part 2-2004
| 便携式锂原电池和蓄电池.安全标准
| Portable Lithium Primary Cells and Batteries - Safety Standard
|
ANSI C18.3M-1991
| 原电池.锂原电池.规范
| Primary Batteries - Lithium Primary Batteries - Specifications
|
ANSI PH3.51-1972
| 摄影用立方闪光灯(电池控制)的尺寸
| Dimensions for Photographic Flashcubes (Battery Operated) Correction - April 1973
|
ANSI PH3.58-1974
| 摄影用大功率立方闪光灯(电池控制)的尺寸
| Dimensions for Photographic High-Power Cubes (Battery Operated)
|
ANSI T1.330-1997
| 电信.电信环境用的阀调的铅酸电池
| Telecommunications - Valve-regulated lead-acid batteries used in the telecommunications environment
|
ANSI T1.405-2002
| 电信.网络与用户装置接口.利用环路反向电池信令的直接向内拨号模拟音频转换访问线路
| Telecommunications -Installation Interfaces - Direct-Inward-Dialing Analog Voicegrade Switched Access Using Loop Reverse-Battery Signaling
|
ANSI T1.411-2001
| 电信.网络与用户装置接口.使用网络提供的反向电池信令的模拟音频增强型911转换访问线路
| Telecommunications - Network-to-Customer Installation Interfaces - Analog Voicegrade Enhanced 911 Switched Access Using Network-Provided Reverse-Battery Signaling
|
ANSI T1.411a Supplement-1996
| 电信.载体和用户装置之间的接口.用网络提供的蓄电池信令发送进行模拟声音级增强的911转换存取.补充件
| Telecommunications - Interface between carriers and customer installations - Analog voicegrade enhanced 911 switched access using network-provided reserve-battery signaling; Supplement
|
ANSI T1.414-1998
| 电信.网络与用户装置接口.使用环路反向电池信令的增强型模拟音频PSAP访问线路
| Telecommunications - Network to Customer Installation Interfaces - Enhanced 911 Analog Voicegrade PSAP Access Using Loop Reverse-Battery Signaling
|
ANSI/ASME PTC50-2002
| 燃料电池动力系统性能
| Fuel Cell Power Systems Performance
|
ANSI/ASTM D7148-2006
| 用电解槽测量系统中用碳极测定碱性蓄电池隔板的离子(电阻率)用试验方法
| Test Method for Determining the Ionic (resistivity) (er) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
|
ANSI/ASTM E1021-1995
| 光伏电池光谱响应的测量方法
| Test Methods for Measuring the Spectral Response of Photovoltaic Cells
|
ANSI/ASTM E1036/E 1036M-1996
| 利用比对电池测定非浓缩地面光伏电池模拟器电特性的方法(米制)
| Test Methods for Electrical Performance of Non-Concentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells (Metric)
|
ANSI/ASTM E1039-1999
| 球面发光条件下校准和表征非浓缩地面光伏比对电池特性试验方法
| Test Method for Calibration and Characterization of Non-Concentrator Terrestrial Photovoltaic Reference Cells Under Global Irradiation
|
ANSI/ASTM E1125-1999
| 利用平行光谱校准初级非浓缩地面光伏比对电池的试验方法
| Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovolatic Reference Cells Using a Tabular Spectrum
|
ANSI/ASTM E1362-1999
| 非浓缩光伏副基准比对电池校准试验方法
| Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
|
ANSI/ASTM E1596-1999
| 光伏电池模拟器太阳能辐射风化试验方法
| Test Method for Solar Radiation Weathering of Photovoltaic Modules
|
ANSI/ASTM E1597-1999
| 海洋环境用光伏电池模拟器盐水浸没压力和温度测试方法
| Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
|
ANSI/ASTM E2047-1999
| 光伏电池阵列绝缘完整性试验方法
| Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
|
ANSI/ASTM E948-1995
| 利用比对电池进行非浓缩地面光伏电池的电特性的方法
| Test Methods for Electrical Performance of Non-Concentrator Terrestrial Photovoltaic Cells Using Reference Cells
|
ANSI/ASTM E973M-1996
| 光伏器件和光伏比对电池光谱失配参数测定方法
| Test Method for Determination of the Spectral Mismatch Parameter between a Photovoltaic Device and a Photovoltaic Reference Cell (Metric)
|
ANSI/CSA AmericaFC 1-2004
| 燃料电池动力装置
| Fuel Cell Power Plants (same as CGA 12.10)
|
ANSI/CSA FC3-2004
| 便携式燃料电池动力系统
| Portable Fuel Cell Power Systems
|
ANSI/EIA 540J000-2000
| 电子设备用电池支架的分规范
| Sectional Specification for Battery Holders for Use in Electronic Equipment
|
ANSI/EIA 540J0AA-2000
| 电子设备用的圆柱形电池支架标准外形的详细规范
| Detail Specification for Cylindrical Battery Holders, Standard Profile, for use in Electronic Equipment
|
ANSI/EIA 540J0AB-2001
| 用于电子设备的币式电池座的详细规范
| Detail Specification for Coin Cell Battery Holders for Use in Electronic Equipment
|
ANSI/EIA-540J000-2000
| 电子设备用蓄电池座分规范
| Sectional Specification for Battery Holders for Use in Electronic Equipment
|
ANSI/EIA-540J0AA-2000
| 电子设备用圆柱形电池安装座,标准形状详细规范
| Detail Specification for Cylindrical Battery Holders, Standard Profile, for use in Electronic Equipment
|
ANSI/EIA-540J0AB-2001
| 电子设备用硬币式蓄电池座详细规范
| Detail Specification for Coin Cell Battery Holders for Use in Electronic Equipment
|
ANSI/IEEE 1013-2007
| 单机光电(PV)系统用酸性铅蓄电池尺寸选定的推荐实施规程
| Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems
|
ANSI/IEEE 1106-2005
| 固定设施用带泄漏口的镍镉蓄电池组的安装、维护、测试及更换的推荐实施规程
| Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications
|
ANSI/IEEE 1115-2000
| 固定电池组用镍镉蓄电池组规格选择
| Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
|
ANSI/IEEE 1184-2006
| 不可间断电源系统用电池的指南
| Guide for Batteries for Uninterruptible Power Supply Systems
|
ANSI/IEEE 1187-2002
| 固定用途的阀调节铅酸蓄电池的安装设计和安装的推荐实施规程
| Recommended Practice for Installation Design and Installation of Valve Regulated Lead-Acid Storage Batteries for Stationary Applications
|
ANSI/IEEE 1188-2005
| 固定设备用的阀调节铅酸蓄电池的维修、试验和更换的推荐实施规程
| Recommended Practice for Maintenance, Testing and Replacement of Valve Regulated Lead-Acid Batteries for Stationary Applications
|
ANSI/IEEE 1189-1996
| 固定设备用的阀调节铅酸(VRLA)蓄电池的选择指南
| Guide for the Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Application
|
ANSI/IEEE 1361-2003
| 独立的光电系统中使用的铅酸蓄电池的选择、充电、试验和评定指南
| Guide for Selection, Charging, Test and Evaluation of Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems
|
ANSI/IEEE 1375-1998
| 固定蓄电池组系统的保护指南
| Guide for Protection of Stationary Battery Systems
|
ANSI/IEEE 1491-2005
| 固定装置中选择和使用蓄电池监控设备的指南
| Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications
|
ANSI/IEEE 1536-2002
| 铁路运输车辆蓄电池物理接口标准
| Standard for Rail Transit Vehicle Battery Physical Interface
|
ANSI/IEEE 1568-2003
| 铁路客运工具用镍镉蓄电池电量大小的推荐规程
| Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles
|
ANSI/IEEE 1578-2007
| 固定蓄电池电解质溢出处理和管理的推荐实施规程
| Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
|
ANSI/IEEE 1625-2004
| 便携式计算机用可再充电电池
| Rechargeable Batteries for Portable Computing
|
ANSI/IEEE 1725-2006
| 移动电话用可再充电电池标准
| Standard for Rechargeable Batteries for Cellular Telephones
|
ANSI/IEEE 450-2002
| 发电站和变电站的大型铅蓄电池组的维护、试验和更换实施规程
| Maintenance, Testing, and Replacement of Large Lead Storage Batteries for Generating Stations and Substations, Practice for
|
ANSI/IEEE 463-2006
| 电解电池线性工作区的电气安全规程标准
| Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
|
ANSI/IEEE 484-2002
| 固定设备用大型铅酸蓄电池组安装设计和安装的实施规程
| Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
|
ANSI/IEEE 485-1997
| 固定装置用的铅酸电池规格选择的推荐实施规程
| Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
|
ANSI/IEEE 535-2006
| 核电站用1E类铅蓄电池的合格证明标准
| Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
|
ANSI/IEEE 937-2007
| 光电(PV)系统用铅酸蓄电池组安装和维护实施规程
| Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
|
ANSI/SAE J1494-1997
| 蓄电池升压器电缆
| Battery Booster Cables
|
ANSI/SAE J1495-1998
| 蓄电池阻燃通风系统的试验程序
| Test Procedure for Battery Flame Retardant Venting Systems
|
ANSI/SAE J1766-1998
| 电动和混合电动车蓄电池系统的推荐实施规程.碰撞完整性试验
| Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems - Crash Integrity Testing
|
ANSI/SAE J2380-1998
| 电动车蓄电池组的振动试验
| Vibration Testing of Electric Vehicle Batteries
|
ANSI/SAE J240-1993
| 汽车蓄电池的寿命试验
| Automotive Storage Batteries, Life Test for
|
ANSI/SAE J537-1994
| 蓄电池组
| Storage Batteries
|
ANSI/SCTE 48-3-2004
| 用GTEM电池测量编织同轴引入电缆的屏蔽效果的试验规程
| Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell
|
ANSI/UL 1236-2006
| 装载发电机启动器蓄电池用蓄电池充电器的安全标准
| Standard for Safety for Battery Chargers for Charging Engine-Starter Batteries
|
ANSI/UL 1564-2006
| 工业蓄电池充电装置安全标准
| Standard for Safety for Industrial Battery Chargers
|
ANSI/UL 1839-2007
| 汽车蓄电池电瓶线的安全标准
| Standard for Safety for Automotive Battery Booster Cables
|
ANSI/UL 218A-2004
| 柴油发动机驱动的离心消防泵用蓄电池接触器
| Battery Contactors for Use in Diesel Engines Driving Centrifugal Fire Pumps
|
ANSI/UL 2267-2006
| 工业电瓶货车设备用燃料电池电源系统安全标准
| Standard for Safety for Fuel Cell Power Systems for Installation in Industrial Electric Trucks
|
ANSI/UL 583-2007
| 工业用蓄电池电力货车标准
| Standard for Electric-Battery-Powered Industrial Trucks
|
ANSI/UL 745-4-36-2006
| 电池组手动工具的特殊要求安全标准
| Standard for Safety for Particular Requirements for Battery Operated Hand Motor Tools
|
ASME PTC 50-2002
| 燃料电池电源系统性能
| (Fuel cell power systems performance)
|
ASTM C 876-1991
| 混凝土中未涂覆的预应力钢筋的半电池电势的试验方法
| Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete
|
ASTM D 7129-2005
| 接合蓄电池隔板中氨的测定的标准试验方法
| Standard Test Method for Determination of Ammonia Trapping in a Grafted Battery Separator
|
ASTM D 7131-2005
| 接合蓄电池隔板中离子交换能力测定的标准试验方法
| Standard Test Method for Determination of Ion Exchange Capacity (IEC) in Grafted Battery Separator
|
ASTM D 7148-2007
| 电解槽测量系统中使用碳极测定碱性蓄电池隔板的离子电阻系数(ER)用标准试验方法
| Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
|
ASTM E 1036-2002
| 使用标准电池的非聚能地面光电模件和阵列电气性能的标准试验方法
| Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
|
ASTM E 1040-2005
| 非集中大地光电参比电池物理特性的标准规范
| Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
|
ASTM E 1125-2005
| 用表列光谱校准初级非集中大地光电参比电池的标准试验方法
| Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
|
ASTM E 1362-2005
| 非集中光电二次参比电池校准的标准试验方法
| Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
|
ASTM E 2236a-2005
| 无聚集器多结光电池和组件的电性能和光谱灵敏度测量的标准试验方法
| Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
|
ASTM E 948a-2005
| 在模拟日光下使用参比电池的光电电池电性能的标准试验方法
| Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
|
ASTM E 973a-2005
| 测定光电装置与光电参比电池之间光谱不协调参数的标准试验方法
| Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
|
ASTM G 95-2007
| 管道涂层的阴极剥离试验用标准试验方法(附着电池法)
| Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
|
IEEE 1013-2000
| 光电系统用铅酸蓄电池尺寸测量的推荐实施规程
| (Recommended practice for sizing lead-acid batteries for photovoltaic (PV) systems)
|
IEEE 1106-1995
| 发电站及变电所用镍-镉蓄电池组的维护,试验及更换用推荐规程
| (Recommended practice for installation, maintenance, testing, and replacement of vented nickel-cadmium batteries for stationary applications)
|
IEEE 1115-2000
| 静态用镍-镉电池组规格的推荐操作规程
| (Recommended practice for sizing nickel-cadmium batteries for stationary applications)
|
IEEE 1144-1996
| 光电系统用校准镍-镉蓄电池组的推荐规程
| (Recommended practice for sizing nickel-cadmium batteries for photovolatic (PV) systems)
|
IEEE 1184-1994
| 不间断电源系统电池尺寸的规定和选择
| (Selection and sizing of batteries for uninterruptible power systems)
|
IEEE 1187-2002
| 固定设备用的阀调节铅酸蓄电池的安装设计和安装的推荐性实施规程
| (Recommended practice for installation design and installation of valve-regulated lead-acid storage batteries for stationary applications)
|
IEEE 1188-1996
| 发电站用阀调节铅酸(VRLA)蓄电池组的保养、试验和更新的推荐规程
| (Recommended practice for maintenance, testing, and replacement of valve-regulated lead-acid (VRLA) batteries for stationary applications)
|
IEEE 1189-1996
| 固定设备用调节阀铅酸(VRLA)蓄电池的选择指南
| (Guide for selection of valve-regulated lead-acid (VRLA) batteries for stationary applications)
|
IEEE 1375-1998
| 固定蓄电池组的保护指南
| (Guide for the protection of stationary battery systems)
|
IEEE 1536-2002
| 铁路运输车辆蓄电池物理接口
| (Rail transit vehicle battery physical interface)
|
IEEE 450-2002
| 通气固定铅蓄电池组的维护、试验及更换
| (Maintenance, testing, and replacement of vented lead-acid batteries for stationary applications)
|
IEEE 484-2002
| 发电站用透气式铅酸蓄电池组设计、安装推荐规程
| (Recommended practice for installation design and installation of vented lead-acid batteries for stationary applications)
|
IEEE 485-1997
| 固定设施用酸性铅蓄电池尺寸测定推荐规程
| (Recommended practice for sizing lead-acid batteries for stationary applications)
|
IEEE 535-1986
| 核电站用1E级铅蓄电池组的鉴定
| (Qualification of class 1E lead storage batteries for nuclear power generating stations)
|
IEEE 650-1990
| 核电站1E级固定式电池充电器和逆变器的合格鉴定
| (Qualification of class 1E static battery chargers and inverters for nuclear power generating stations)
|
IEEE 937-2000
| 光电系统用铅酸蓄电池组的安装及维护推荐规程
| (Recommended practice for installation and maintenance of lead-acid batteries for photovoltaic (PV) systems)
|
UL 1236-2002
| 充电的发动机起动电池组用蓄电池充电器
| (Battery chargers for charging engine-starter batteries )
|
UL 1564-1993
| 工业蓄电池充电器
| (Industrial battery chargers )
|
UL 1642-1995
| 锂蓄电池组
| (Lithium batteries )
|
UL 1989-1996
| 备用蓄电池组
| (Standby batteries )
|
UL 2054-1997
| 家用和商用蓄电池组
| (Household and commercial batteries )
|
UL 2089-2003
| 车辆用蓄电池适配器
| (Vehicle battery adapters )
|
UL 218A-2004
| 柴油机中驱动离心点火泵用电池接头标准
| (Standard for battery contactors for use in diesel engines driving centrifugal fire pumps )
|
UL 745-3-1995
| 由蓄电池供电的便携工具
| (Portable battery operated tools )
|
UL 745-4-1-1995
| 由蓄电池供电的电钻的特殊要求
| (Particular requirements battery-operated drills ) |
UL 745-4-11-1995
| 由蓄电池供电的往复式锯的特殊要求
| (Particular requirements for battery-operated reciprocating saws )
|
UL 745-4-14-1995
| 由蓄电池供电的刨刀的特殊要求
| (Particular requirements for battery-operated planers )
|
UL 745-4-17-1995
| 由蓄电池供电的刻纹机和修剪机特殊要求
| (Particular requirements for battery-operated routers and trimmers )
|
UL 745-4-2-1995
| 由蓄电池供电的旋具和套筒扳手特殊要求
| (Particular requirements for battery-operated screwdrivers and impact wrenches )
|
UL 745-4-3-1995
| 由蓄电池供电的研磨机、磨光器和盘形砂轮机特殊要求
| (Particular requirements for battery-operated grinders, polishers, and disk-type sanders )
|
UL 745-4-35-1995
| 由蓄电池供电的污水清洁器特殊要求
| (Particular requirements for battery-operated drain cleaners )
|
UL 745-4-36-1995
| 由蓄电池供电的手持式电动工具特殊要求
| (Particular requirements for battery-operated hand motor tools )
|
UL 745-4-4-1995
| 由蓄电池供电的砂轮机特殊要求
| (Particular requirements for battery-operated sanders )
|
UL 745-4-5-1995
| 由蓄电池供电的圆盘锯和圆盘刀具特殊要求
| (Particular requirements for battery-operated circular saws and circular knives )
|
UL 745-4-6-1995
| 由蓄电池供电的锤子的特殊要求
| (Particular requirements for battery-operated hammers )
|
UL 745-4-8-1995
| 由蓄电池供电的剪刀和步冲轮廓机特殊要求
| (Particular requirements for battery-operated shears and nibblers )
|
编号 | 中文名称 | 英文名称 |