| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI A10.11-1989
| 建筑施工和拆除工作.人员安全和碎片拦截网
| Construction and Demolition Operations - Personnel and Debris Nets
|
| ANSI A10.15-1995
| 建筑施工和拆除工作.挖泥作业的安全要求
| Construction and Demolition Operations - Dredging, Safety Requirements for
|
| ANSI A10.16-1995
| 建筑施工和拆除工作.隧道、竖井和藻井的安全要求
| Construction and Demolition Operations - Safety Requirements for Tunnels, Shafts, and Caissons
|
| ANSI A10.33-1992
| 建筑施工和拆除工程.安全和卫生大纲.多雇员参与的工程项目的要求
| Construction and demolition operations - Safety and health programm - Requirements for multi-employer projects
|
| ANSI A10.34-2001
| 建筑地点及其附近的公共区域的保护
| Protection of the Public on and Adjacent to Construction Sites
|
| ANSI A10.42-2000
| 建筑工业中起重设备的合格鉴定和可靠性
| Rigging Qualifications and Responsibilities in the Construction Industry
|
| ANSI A10.7-1998
| 建筑施工和拆除.商业炸药和起爆剂.运输、存储、装卸和使用的安全要求
| Construction and Demolition - Commercial Explosives and Blasting Agents - Safety Requirements for Transportation, Storage, Handling and Use
|
| ANSI A10.9-1997
| 建筑施工和拆除工作.混凝土和圬工作业
| Construction and Demolition Operations - Concrete and Masonry Work
|
| ANSI ATIS0600318-2005
| 消费者建筑或建筑物出口处电信网络设备的电气保护
| Electrical Protection Applied to Telecommunications Network Plant at Entrances to Customer Structures or Buildings
|
| ANSI FM4880-2001
| 1级防火试验标准:A)绝缘墙或墙壁和天花板或屋顶;B)塑料内部终饰材料;C)塑料外部建筑面板;D)墙和墙和天花板
| Fire Test Standard for Class 1: A) Insulated Wall or Walls and Ceilings or Roofs; B) Plastic Interior Finish Materials; C) Plastic Exterior Building Panels; D) Wall and Wall and Ceiling Coating Systems; E) Interior or Exterior Finish Systems
|
| ANSI O5.1c-2004
| ANSI O5.1-2002的补充件.木杆.公用建筑用结构胶合板
| Supplement to ANSI O5.1-2002- Wood Poles - Structural Glued Laminated Timber for Utility Structures
|
| ANSI O5.2-2006
| 公用事业建筑用建筑层压胶合板(木制品用)
| Structural Glued Laminated Timber for Utility Structures (for Wood Products)
|
| ANSI S2.71-1983
| 评估人体暴露在建筑物震动环境中指南
| Guide to the Evaluation of Human Exposure to Vibration in Buildings
|
| ANSI S3.29-1983
| 在建筑物中人体感受振动的评测指南
| Guide to the evaluation of human exposure to vibration in buildings
|
| ANSI Y32.4-1977
| 建筑结构和楼房结构示意图中管路设施的图形符号
| Graphic symbols for plumbing fixtures for diagrams used in architecture and building construction
|
| ANSI Z83.7a Addenda-1991
| 建筑物的燃气加热器.补充件
| Gas-fired construction heaters; Addenda
|
| ANSI Z83.7a-2007
| 燃气建筑物加热器(同CSA 2.14a)
| Gas-Fired Construction Heaters (same as CSA 2.14a)
|
| ANSI Z83.7b Addenda-1993
| 建筑物燃气加热器.补充件
| Gas-fired construction heaters; Addenda
|
| ANSI Z83.7b-1993
| 建筑物燃气加热器.补充件
| Gas-fired construction heaters; Addenda
|
| ANSI Z97.1-2004
| 建筑物中窗用玻璃材料的安全性能规范和测试方法
| Glazing Materials Used in Buildings, Safety Performance Specifications and Methods of Test
|
| ANSI/AFPA NDS-1997
| 木质建筑的国家设计规范
| National Design Specification for Wood Construction
|
| ANSI/AIHA Z9.3-2007
| 喷涂操作.设计、建筑和通风安全代码
| Spray Finishing Operations-Safety Code for Design, Construction, and Ventilation
|
| ANSI/AISC 341-2005
| 结构钢建筑物的有关地震条款
| Seismic Provisions for Structural Steel Buildings
|
| ANSI/AISC 341s1-2005
| 对结构钢建筑物地震条款的补充件1
| Supplement No. 1 to the Seismic Provisions for Structural Steel Buildings
|
| ANSI/AISC 360-2005
| 结构钢建筑物的规范
| Specification for Structural Steel Buildings
|
| ANSI/ASAE EP484.2-1998
| 包金属的柱式框架矩形建筑物的结构和横隔梁
| Diaphragm, Design of Metal-Clad Post-Frame Rectangular Buildings
|
| ANSI/ASAE S354.5-2006
| 农场及其建筑物设施的安全性
| Safety for Farmstead Equipment
|
| ANSI/ASAE S401.2-1993
| 农用建筑物中绝热材料的应用指南
| Guidelines for Use of Thermal Insulation in Agricultural Buildings
|
| ANSI/ASHRAE 105-2007
| 测量、表达和比较建筑物能量性能的标准方法
| Standard Methods of Measuring, Expressing and Comparing Building Energy Performance
|
| ANSI/ASHRAE 135-1995
| BAC 网.建筑自动化和控制网 A 数据电信协议
| BACnet - A Data Communication Protocol for Building Automation and Control Networks
|
| ANSI/ASHRAE 135a-2005
| BAC网.建筑自动化和控制网络的数据通信协议
| BACnet - A Data Communication Protocol for Building Automation and Control Networks
|
| ANSI/ASHRAE 135b-2001
| BAC网.建筑自动化和控制网络用数据通信协议
| BACNET - A Data Communication Protocol for Building Automation and Control Networks
|
| ANSI/ASHRAE 140-2001
| 评估建筑物能量分析计算机程序的标准试验方法
| Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
|
| ANSI/ASHRAE 140a-2007
| 建筑物能源分析计算机程序的评估用试验标准方法
| Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
|
| ANSI/ASHRAE 140b-2007
| 评估建筑物能量分析计算机程序的标准试验方法
| Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
|
| ANSI/ASHRAE 169-2006
| 用于建筑设计的气象资料标准
| Weather Data for Building Design Standards
|
| ANSI/ASHRAE 169a-2006
| 建筑物设计标准的天气数据
| Weather Data for Building Design Standards
|
| ANSI/ASHRAE 62.2a-2004
| 低层住宅建筑物的通风和合格的室内空气质量.修改件a
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings, Addendum a
|
| ANSI/ASHRAE 62.2b-2004
| 低层住宅建筑物的通风和合格的室内空气质量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2e-2007
| 低层住宅建筑中的通风设备和达标室内空气质量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2g-2006
| 低层住宅建筑物的通风及合格的室内空气质量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2h-2007
| 低层住宅建筑中的通风设备和达标室内空气质量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2i-2007
| 低层住宅建筑中的通风设备和达标室内空气质量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2k-2007
| 低层住宅建筑物中的通风和可接受室内空气质量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62.2P-2003
| 低层住宅建筑物中的通风和可接受的室内空气质量
| Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
|
| ANSI/ASHRAE 62af-2003
| 商业、机关团体的和高层住宅建筑物的通风和达标的室内空气质量.附录af
| Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda af
|
| ANSI/ASHRAE 62n-2004
| 商用、公共机构和高层住宅建筑物的通风和达标的室内空气质量.补充件n
| Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda n
|
| ANSI/ASHRAE 62r-2003
| 商业、机关团体的和高层住宅建筑物的通风和达标的室内空气质量.附录r
| Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda r
|
| ANSI/ASHRAE 62z-2003
| 商业、机关团体和高层住宅建筑物的通风和达标的室内空气质量.附录z
| Ventilation and Acceptable Indoor Air Quality in Commercial, Institutional, and High-Rise Residential Buildings, Addenda z
|
| ANSI/ASHRAE 90.2-2007
| 新型低层住宅建筑物的能量有效性设计
| Energy Efficient Design of New Low-Rise Residential Buildings
|
| ANSI/ASHRAE 90.2k-2007
| 低层住宅建筑物的能量有效性设计
| Energy Efficient Design of Low-Rise Residential Buildings
|
| ANSI/ASHRAE/ACCA 183P-2007
| 除低层住宅建筑外的建筑物冷热负荷计算的极值
| Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 100-2006
| 现有建筑物的能源保护
| Energy Conservation in Existing Buildings
|
| ANSI/ASHRAE/IESNA 90.1-2007
| 除低层住宅建筑物(包括附加物B、C、D、E、F、G、I和M)外新型建筑物的能量有效性设计
| Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings (Including Addenda B, C, D, E, F, G, I and M)
|
| ANSI/ASHRAE/IESNA 90.1a-2007
| 除低层住宅建筑外的建筑物能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1aa-2007
| 除低层住宅建筑外建筑物用能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ab-2007
| 除低层住宅建筑外建筑物用能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ac-2007
| 除低层住宅建筑外建筑物的能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ae-2007
| 除低层住宅建筑外建筑物的能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ag-2007
| 除低层住宅建筑外建筑物用能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ah-2007
| 除低层住宅建筑外的建筑物用能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ai-2007
| 除低层住宅建筑外建筑物的能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1al-2007
| 除低层住宅建筑外建筑物的能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1an-2007
| 除低层住宅建筑外建筑物的能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ao-2007
| 除低层住宅建筑外建筑物的能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ap-2001
| 除层数低而无电梯的住宅楼房外的建筑物的能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ap-2007
| 除低层住宅建筑外建筑物用能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1aq-2007
| 除低层住宅建筑外的建筑物能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1ar-2007
| 除低层住宅建筑外的建筑物能源标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1av-2007
| 除低层住宅建筑外的建筑物能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1b-2007
| 除低层住宅建筑外的建筑物能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.1y-2007
| 除低层住宅建筑外建筑物的能量标准
| Energy Standard for Buildings Except Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.2c-2007
| 低层住宅建筑的能效设计
| Energy Efficient Design of Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.2d-2007
| 低层住宅建筑的能效设计
| Energy Efficient Design of Low-Rise Residential Buildings
|
| ANSI/ASHRAE/IESNA 90.2e-2007
| 低层住宅建筑的能效设计
| Energy Efficient Design of Low-Rise Residential Buildings
|
| ANSI/ASME A120.1-2006
| 建筑物维护用动力升降工作台、移动梯和构架的安全要求
| Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance
|
| ANSI/ASME B18.2.6-2006
| 建筑结构中紧固件的使用
| Fasteners for Use in Structural Applications
|
| ANSI/ASME B31.9-2004
| 建筑物服务设施用压力管道标准
| Building Services Piping Code for Pressure Piping
|
| ANSI/ASSE A10.40-2007
| 建筑中工人慢性肌肉骨骼损伤的减少量
| Reduction of Musculoskeletal Problems in Construction
|
| ANSI/ASTM D4226-2000
| 刚性聚氯乙烯(PVC)建筑产品冲击试验方法(95-1, Item 42) (08.02)
| Test Method for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products (95-1, Item 42) (08.02)
|
| ANSI/ASTM D4397-1991
| 建筑、工业和农业用聚乙烯板材规格
| Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications (08.03)
|
| ANSI/ASTM D4803-1997
| 预测聚氯乙烯建筑产品热积累的试验方法
| Test Method for Predicting Heat Buildup in PVC Building Products
|
| ANSI/ASTM E119-2007
| 建筑结构和材料着火试验的试验方法
| Test Methods for Fire Tests of Building Construction and Materials
|
| ANSI/ASTM E1334-1995
| 建筑物或设施的耐用额定值的制定实施规程(04.11)
| Practice for Preparing a Serviceability Rating of a Building or Facility (04.11)
|
| ANSI/ASTM E1410-1991
| 住宅建筑物用能量评价的规定数据的实施规程(04.11)
| Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings (04.11)
|
| ANSI/ASTM E1464-1992
| 商业和科研院所建筑物或设施的能量监测协议制定指南
| Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities (04.11)
|
| ANSI/ASTM E1480-1992
| 设施(与建筑有关的) 管理术语
| Terminology of Facility Management (Building-Related) (04.11)
|
| ANSI/ASTM E1494a-1992
| 含石棉易碎建筑材料密封剂喷涂或镘刀涂抹规程
| Practice for Encapsulants for Spray-or-Trowel-Applied Friable Asbestos-Containing Building Materials (04.11)
|
| ANSI/ASTM E1553-1993
| 在清除和建筑活动中收集的空气中铅颗粒的实施规程(04.11)
| Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (04.11)
|
| ANSI/ASTM E1585-1993
| 利用光谱测定法测量和计算建筑结构平面玻璃辐射密度的方法
| Test Method for Measuring and Calculating Emittance of Architectural Flat Glass Products using Spectrometric Measurements
|
| ANSI/ASTM E1670-1995
| 办公设施关于操作和维护管理用建筑物性能的适用性分类
| Classification for Serviceability of an Office Facility on Performance of Buildings for Management of Operations and Maintenance (04.11)
|
| ANSI/ASTM E1679-1995
| 对建筑物或建筑物相关设施制定适用性要求的实施规程(04.11)
| Practice for Setting Requirements for Serviceability of a Building or Building-Related Facility (04.11)
|
| ANSI/ASTM E1699-1995
| 建筑物和建筑物系统进行价值分析的实施规程
| Practice for Performing Value Analysis (VA) of Buildings and Building Systems (04.11)
|
| ANSI/ASTM E1700-1995
| 办公设施关于结构和建筑物围护结构适用性的分类
| Classification for Serviceability of an Office Facility for Structure and Building Envelope (04.11)
|
| ANSI/ASTM E1836-2002
| 设备管理用建筑物地板面积测量的标准分类
| Standard Classification for Building Floor Area Measurements for Facility Management
|
| ANSI/ASTM E2026-2007
| 建筑物地震损伤性估计指南
| Guide for Estimation of Building Damageability in Earthquakes
|
| ANSI/ASTM E2127-2001
| 建筑物结构隔墙系统抗拉伸与横向荷载组合的静荷载试验方法
| Test Methods for Static Load Test for Combined Tensile and Transverse Load Resistance of Panel Wall Systems in Building Construction
|
| ANSI/ASTM E2128-2001
| 建筑墙体漏水性评价指南
| Guide for Evaluating Water Leakage of Building Walls
|
| ANSI/ASTM E329a-2006
| 建筑材料的测试和/或验收机构的规范
| Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction
|
| ANSI/ASTM E541-2002
| 建造建筑物系统分析和符合性保证从业机构资质准则
| Criteria for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
|
| ANSI/ASTM E564-1995
| 建筑物构架墙抗剪强度的静态载荷的试验方法
| Method of Static Load Test for Shear Resistance of Framed Walls for Buildings (04.11)
|
| ANSI/ASTM E631-1993
| 建筑术语
| Terminology of Building Construction (04.11)
|
| ANSI/ASTM E651-2002
| 建造建筑物的系统分析和符合性保证从业机构能力评价导则
| Guidelines for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
|
| ANSI/ASTM E84b-2006
| 建筑物材料表面燃烧特征的试验方法
| Test Method for Surface Burning Characteristics of Building Materials
|
| ANSI/ASTM E894-1988
| 建筑物护栏和永久金属护栏系统用锚固装置的试验方法
| Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings (04.11)
|
| ANSI/ASTM F940-2000
| 海上建筑物及造船用保护性涂料的质量控制验收检验程序的标准操作规程
| Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
|
| ANSI/AWS D14.3/D 14.3M-2005
| 焊接、土方、建筑和农业设备的规范
| Specification for Welding, Earthmoving, Construction, and Agricultural Equipment
|
| ANSI/BHMA A156.6-2005
| 建筑门框的细木工
| Architectural Door Trim
|
| ANSI/BSR/TIA-569-B-2005
| 远程通信通道和空间的商业建筑标准
| Commercial Building Standard for Telecommunications Pathways and Spaces
|
| ANSI/IAS LC-2-1996
| 农牧圈饲建筑物用直接燃气式循环加热器
| Direct Gas-Fired Circulating Heaters for Agricultural Animal Confinement Buildings
|
| ANSI/ICC 400-2007
| 原木结构设计、建筑和性能标准
| Standard on Design, Construction and Performance of Log Structures
|
| ANSI/ICC A117.1-2003
| 可接近的可用建筑物和设施
| Accessible and Useable Buildings and Facilities
|
| ANSI/IEEE 241-1991
| 商业建筑物中电力系统(灰皮书)
| Electric Power Systems in Commercial Buildings (Gray Book)
|
| ANSI/NECA 104-2006
| 安装铝建筑电线和电缆的推荐规程
| Recommended Practice for Installing Aluminum Building Wire and Cable
|
| ANSI/NECA 568-2006
| 安装商用建筑物通信电缆标准
| Standard for Installing Commercial Building Telecommunications Cabling
|
| ANSI/NEMA WC63.2-1996
| 建筑物内数据同轴通信电缆的性能标准
| Performance Standard for Coaxial Premise Data Communications Cables
|
| ANSI/NFPA 1144-2007
| 荒地火灾中减少建筑试验着火危害的标准
| Standard for Reducing Structure Ignition Hazards from Wildland Fire
|
| ANSI/NFPA 1145-2006
| 在人工建筑救火中A级泡沫的使用指南
| Guide for the Use of Class A Foams in Manual Structural Fire Fighting
|
| ANSI/NFPA 1402-2006
| 建筑物防火服务培训中心指南
| Guide to Building Fire Service Training Centers
|
| ANSI/NFPA 1851-2007
| 建筑消防防护全套部件的选择、保养和维护用标准
| Standard on Selection, Care, and Maintenance of Structural Fire Fighting Protective Ensemble Elements
|
| ANSI/NFPA 1971-2000
| 建筑物消防用防护服
| Protective Clothing for Structural Fire Fighting
|
| ANSI/NFPA 220-2006
| 房屋建筑类型
| Types of Building Construction
|
| ANSI/NFPA 241-2004
| 建筑物改建及拆除的安全防护
| Safeguarding Construction, Alteration, and Demolition Operations
|
| ANSI/NFPA 251-2006
| 房屋建筑和建筑材料的着火试验方法
| Methods of Fire Tests of Building Construction and Materials
|
| ANSI/NFPA 255-2006
| 建筑材料表面燃烧特性的标准试验方法
| Standard Method of Test of Surface Burning Characteristics of Building Materials
|
| ANSI/NFPA 259-2003
| 建筑材料潜在热的标准试验方法
| Standard Test Method for Potential Heat of Building Materials
|
| ANSI/NFPA 415-2008
| 机场终点建筑、油料管道和装载道标准
| Standard on Airport Terminal Buildings, Fueling Ramp Drainage, and Loading Walkways
|
| ANSI/NFPA 5000-2006
| 房屋建筑和安全规范T
| Building Construction and Safety CodeT
|
| ANSI/NFPA 703-2006
| 建筑材料用阻燃处理木材和阻燃涂层标准
| Standard for Fire-Retardant Treated Wood and Fire-Retardant Coatings for Building Materials
|
| ANSI/NFPA 80A-2007
| 建筑物外部防火的推荐实施规程
| Recommended Practice for Protection of Buildings from Exterior Fire Exposures
|
| ANSI/NFPA 900-2006
| 建筑物能源法规
| Building Energy Code
|
| ANSI/NFPA 914-2001
| 古建筑的修复和重新使用
| Rehabilitation and Adaptive Reuse of Historic Structures
|
| ANSI/SAE J1614-1998
| 建筑、农业和野外作业机器的布线系统
| Wiring Distribution Systems for Construction, Agricultural, and Off-Road Work Machines
|
| ANSI/SAE J370-1998
| 建筑和工业机械用螺栓和有头螺钉尺寸
| Bolt and Capscrew Sizes for Use in Construction and Industrial Machinery
|
| ANSI/SAE J386-1997
| 建筑机械用座位安全带
| Seat Belts for Construction Machines
|
| ANSI/SAE J572-1993
| 建筑和工业机器用密封照明装置的要求
| Requirements for Sealed Lighting Unit for Construction and Industrial Machines
|
| ANSI/SAE J598-1994
| 用于建筑、工业和林业机械的密封照明装置
| Sealed Lighting Units for Construction, Industrial, and Forest Machinery
|
| ANSI/TIA J-STD607-A-2002
| 商用建筑物的电信接地和连接安全性要求
| Commercial Building Grounding and Bonding Requirements for Telecommunications
|
| ANSI/TIA-568-B.1-1-2001
| 商用建筑电信电缆敷设标准.第1部分:一般要求.补充件1.4对UTP和4对ScTP插塞式电缆的最小弯曲半径
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
|
| ANSI/TIA-568-B.1-2-2003
| 商用建筑电信电缆敷设标准.第1部分:一般要求.补充件2.屏蔽电缆水平敷设的接地和连接规范
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling
|
| ANSI/TIA-568-B.1-2001
| 商用建筑电信电缆敷设标准
| Commercial Building Telecommunications Cabling Standard
|
| ANSI/TIA-568-B.1-3-2003
| 商用建筑电信电缆敷设标准.第1部分:一般要求.补充件3.根据纤维类型决定的光纤设备的可支持距离和信道衰减
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type
|
| ANSI/TIA-568-B.1-4-2003
| 商用建筑电信电缆敷设标准.第1部分:一般要求.补充件4. 第6类850nm激光优选的50/125微米多模纤维的鉴别
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
|
| ANSI/TIA-568-B.1-5-2004
| 商业建筑物电信电缆连接标准.第1部分:一般要求.附录5:电信附件用电信电缆连接
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 5 - Telecommunications Cabling for Telecommunications Enclosures
|
| ANSI/TIA-568-B.2-1-2002
| 商用建筑电信电缆敷设标准.第2部分:对称双绞合线部件.补充件1.4对100欧姆的第6类敷设电缆的传输性能规范
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling
|
| ANSI/TIA-568-B.2-11-2005
| 商用建筑电信电缆敷设标准.第2部分:平衡双绞线电缆组件.补充件11.增加4对UTP和ScTP电缆直径的规范
| Commercial Building Telecommunications Cabling Standard - Part2: Balanced Twisted-Pair Cabling Components - Addendum 11: Specification for Increased Diameter of 4-Pair UTP and ScTP Cables
|
| ANSI/TIA-568-B.2-2-2001
| 商用建筑电信电缆敷设标准.第2部分:对称双绞合线电缆敷设
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA-568-B.2-2001
| 商用建筑电信电缆敷设标准.第2部分:平衡绞合的成对电缆敷设
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA-568-B.2-3-2002
| 商用建筑电信电缆敷设标准.第2部分:对称双绞合线电缆敷设.补充件3.插入损耗和回波损耗通过/失效确定的附加
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination
|
| ANSI/TIA-568-B.2-4-2002
| 商用建筑电信电缆敷设标准.第2部分:对称双绞合线电缆敷设.补充件4.铜制连接硬件的无钎焊连接的可靠性要求
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware
|
| ANSI/TIA-568-B.2-5-2003
| 商用建筑电信电缆敷设标准.第2部分:对称双绞线电缆敷设元件.附录5
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 5
|
| ANSI/TIA-568-B.2-6-2003
| 商用建筑物电信电缆敷设标准.第2部分:对称双绞电路敷设元件.补充件6:6类相关元件试验方法
| Commercial Building Telecommunicatins Cabling Standard - Part 2: Balanced Twisted-Pair Cabling Components - Addendum 6 - Category 6 Related Component Test Procedures
|
| ANSI/TIA-568-B.2-9-2007
| 商用建筑物电信敷设电缆标准.第2部分:平衡双绞线铺设电缆元件.补充件9:附加分类6平衡要求和测量程序
| Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures
|
| ANSI/TIA-568-B.2-9-200x-2005
| 商用建筑电信电缆敷设标准.第2部分：平衡双绞线电缆组件.补充件9.附加分类6平衡要求和测量过程
| Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures
|
| ANSI/TIA-606-A-2002
| 商用建筑的电信基础设施的管理标准
| Administration Standard for the Telecommunications Infrastructure of Commercial Buildings
|
| ANSI/TIA-862-2002
| 商用建筑物的建筑自动化系统的电缆敷设标准
| Building Automation Systems Cabling Standard for Commercial Buildings
|
| ANSI/TIA/EIA 568-B.1-1-2001
| 商用建筑电信电缆标准.第1部分:一般要求.补充件 1.最小四对UTP和四对ScTP接插电缆弯曲半径
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
|
| ANSI/TIA/EIA 568-B.1-2-2003
| 商用建筑电信电缆敷设标准.第1部分:一般要求.附录2.铠装水平电缆敷设的接地和连接规范
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling
|
| ANSI/TIA/EIA 568-B.1-2001
| 商用建筑物电信电缆敷设标准
| Commercial Building Telecommunications Cabling Standard
|
| ANSI/TIA/EIA 568-B.1-3-2003
| 商用建筑电信电缆敷设标准.第1部分:一般要求.附录3.根据纤维类型决定的光纤设备的可支持距离和信道衰减
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type
|
| ANSI/TIA/EIA 568-B.1-4-2003
| 商用建筑电信电缆敷设标准.第1部分:一般要求.附录4.类别6、850nm激光优选50/125微米多模纤维
| Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
|
| ANSI/TIA/EIA 568-B.2-1-2002
| 商用建筑电信电缆敷设标准.第2部分:对称绞线对元件.补充1.四线对100 OHM 6类电缆敷设传输性能规范
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling
|
| ANSI/TIA/EIA 568-B.2-2-2001
| 商用建筑物电信电缆敷设标准.第2部分:双绞线对称电缆敷设
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA/EIA 568-B.2-2001
| 商用建筑物电信电缆敷设标准.第2部分:对称绞线对电缆敷设
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
|
| ANSI/TIA/EIA 568-B.2-3-2002
| 商用建筑电信电缆敷设标准.第2部分:平衡绞线对电缆.补充件3:插入损耗和回波损耗通过/失败测定的附加考虑
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination
|
| ANSI/TIA/EIA 568-B.2-4-2002
| 商用建筑电信电缆敷设标准.第2部分:对称绞线对电缆敷设元件.补充4.铜制连接零件的非钎焊连接可靠性要求
| Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware
|
| ANSI/TIA/EIA 569-A-1-2000
| 商用建筑的电信通道和空间
| Commercial Building Telecommunications Pathways and Spaces
|
| ANSI/TIA/EIA 569-A-1998
| 电信通道和空间的商用建筑标准
| Commercial Building Standard for Telecommunications Pathways and Spaces
|
| ANSI/TIA/EIA 569-A-3-2000
| 商用建筑的电信通道和空间标准.进出楼面口
| Commercial Building Standard for Telecommunications Pathways and Spaces - Access Floor
|
| ANSI/TIA/EIA 569-A-4-2000
| 电信通道和空间的商用建筑标准
| Commercial Building Standard for Telecommunications Pathways and Spaces
|
| ANSI/TIA/EIA 569-A-5-2001
| 商用建筑物电信布线标准.补充件5.地板内的系统
| Commercial Building Telecommunications Cabling Standard - Addendum 5 - In-Floor Systems
|
| ANSI/TIA/EIA 569-A-6-2001
| 电信通路和空间用电信商业建筑标准.补充件6.多租户通路和空间
| Commercia Building Standard for Telecommunications Pathways and Spaces - Addendum 6 - Multi-Tenant Pathways and Spaces
|
| ANSI/TIA/EIA 606-A-2002
| 商用建筑的电信基础设施的管理标准
| Administration Standard for the Telecommunications Infrastructure of Commercial Buildings
|
| ANSI/TIA/EIA 862-2002
| 商用建筑物用建筑物自动化系统电缆敷设标准
| Building Automation Systems Cabling Standard for Commercial Buildings
|
| ANSI/TIA/EIA J-STD607-A-2002
| 民用建筑远距通信接地和搭接要求
| Commercial Building Grounding and Bonding Requirements for Telecommunications
|
| ANSI/UL 103-2006
| 工厂制住宅型烟囱和建筑物供暖设备的安全标准
| Standard for Safety for Factory-Built Chimneys for Residential Type and Building Heating Appliances
|
| ANSI/UL 1040-2001
| 建筑绝热墙耐火试验安全性标准
| Standard for Safety for Fire Test for Insulated Wall Construction
|
| ANSI/UL 2079-2006
| 建筑物连接系统的防火试验安全标准
| Standard for Safety for Tests for Fire Resistance of Building Joint Systems
|
| ANSI/UL 263-2003
| 建筑结构和材料防火试验的安全标准
| Standard for Safety for Fire Tests of Building Construction and Materials
|
| ANSI/UL 723-2005
| 建筑材料表面燃烧特性试验的安全标准
| Standard for Safety for the Test for Surface Burning Characteristics of Building Materials
|
| ANSI/WDMA I.S.1A-2004
| 建筑木制结构齐边拉门的工业规范
| Industry Specification for Architectural Wood Flush Doors
|
| ANSI/WDMA I.S.6A-2001
| 建筑木制门挺和有轨门的工业标准
| Industry Standard for Architectural Wood Stile and Rail Doors
|
| ASME A120.1-2001
| 建筑物维修用电动升降平台的安全要求
| (Safety requirements for powered platforms for building maintenance)
|
| ASME B30.3a Addenda-1997
| 建筑用塔式起重机.附录
| (Construction tower cranes; Addenda)
|
| ASME B30.3b Addenda-1998
| 建筑用塔式起重机.附录
| (Construction tower cranes; Addenda)
|
| ASME B30.3c Addenda-1999
| 建筑用塔式起重机.附录
| (Construction tower cranes; Addenda)
|
| ASME B31.9-1996
| 建筑物服务管道
| (Building services piping)
|
| ASME N45.2.3-1973
| 核电站建筑阶段的房屋维护
| (Housekeeping during the construction phase of nuclear power plants)
|
| ASME N45.2.3a Addenda-1978
| 核电站建筑阶段的房屋维护.附录
| (Housekeeping during the construction phase of nuclear power plants; Addenda)
|
| ASME N45.2.5-1978
| 核电厂建筑阶段结构混凝土,结构钢,土质和地基的安装,检验以及测试用附加质量保证要求
| (Supplementary quality assurance requirements for installation, inspection, and testing of structural concrete, structural steel, soils, and foundations during the construction phase of nuclear power p)
|
| ASME N45.2.8-1975
| 核电厂建筑阶段机械设备和系统的安装,检验和测试用附加质量保证要求
| (Supplementary quality assurance requirements for installation, inspection and testing of mechanical equipment and systems for the construction phase of nuclear power plants)
|
| ASME N45.2.8a Addenda-1981
| 核电厂建筑阶段机械设备和系统的安装,检验和测试用附加质量保证要求.附录
| (Supplementary quality assurance requirements for installation, inspection and testing of mechanical equipment and systems for the construction phase of nuclear power plants; Addenda)
|
| ASME Y32.4-1977
| 建筑学和房屋建筑简图上管道装置示意用图形符号
| (Graphic symbols for plumbing fixtures for diagrams used in architecture and building construction)
|
| ASTM A 1043/A 1043M-2005
| 建筑物中使用的低拉伸弯曲力的结构钢的标准规范
| Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
|
| ASTM A 595/A 595M-2006
| 建筑用锥形、高强度低合金或低碳钢管的标准规范
| Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
|
| ASTM A 755/A 755M-2003
| 外露建筑产品用热浸涂覆和用卷涂工艺预涂金属的钢薄板的标准规范
| Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
|
| ASTM B 101-2007
| 建筑结构用包铅铜薄板材和带材的标准规范
| Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
|
| ASTM B 370-2003
| 建筑结构用铜薄板和带材标准规范
| Standard Specification for Copper Sheet and Strip for Building Construction
|
| ASTM B 882-2005
| 建筑物用已生有绿锈的铜的规范
| Specification for Pre-Patinated Copper for Architectural Applications
|
| ASTM C 1021-2001
| 建筑密封料试验用实验室的标准实施规程
| Standard Practice for Laboratories Engaged in the Testing of Building Sealants
|
| ASTM C 1046-1995
| 建筑物外壳构件的热通量和温度的现场测量标准实施规程
| Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
|
| ASTM C 1060-1990
| 框架建筑物外壳内腔的绝热设施的温度记录检验
| Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
|
| ASTM C 1067-2000
| 建筑材料试验方法的耐久或屏蔽程序实施的标准实施规程
| Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
|
| ASTM C 1148a-1992
| 测量砖石建筑用灰浆干缩性标准试验方法
| Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
|
| ASTM C 1155-1995
| 通过现场数据测定建筑包覆物的热阻的标准实施规程
| Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
|
| ASTM C 1158-2005
| 建筑结构中辐射屏蔽系统(RBS)的使用和安装标准实施规程
| Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
|
| ASTM C 1172-2003
| 建筑用夹层平板玻璃标准规范
| Standard Specification for Laminated Architectural Flat Glass
|
| ASTM C 1194-2003
| 建筑铸石抗压强度的标准试验方法
| Standard Test Method for Compressive Strength of Architectural Cast Stone
|
| ASTM C 1195-2003
| 建筑用铸石的吸收性标准试验方法
| Standard Test Method for Absorption of Architectural Cast Stone
|
| ASTM C 1197-2004
| 用液压千斤顶法现场测量砖石建筑可变形性的标准试验方法
| Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
|
| ASTM C 11a-2007
| 石膏及相关建筑材料和系统相关标准术语
| Standard Terminology Relating to Gypsum and Related Building Materials and Systems
|
| ASTM C 1224-2003
| 建筑物用反射绝缘材料标准规范
| Standard Specification for Reflective Insulation for Building Applications
|
| ASTM C 1249a-2006
| 建筑密封玻璃用密封绝缘玻璃组件的二次密封标准规范
| Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
|
| ASTM C 1313-2005
| 房屋建筑用片状辐射栅栏的标准规范
| Standard Specification for Sheet Radiant Barriers for Building Construction Applications
|
| ASTM C 1321-2004
| 建筑物内部辐射控制涂层系统(IRCCS)的安装和使用的标准实施规程
| Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
|
| ASTM C 1349-2004
| 建筑用聚碳酸酯镀层平板玻璃的标准规范
| Standard Specification for Architectural Flat Glass Clad Polycarbonate
|
| ASTM C 1363-2005
| 用高温实验室法测定建筑材料和包装组件热性能的标准试验方法
| Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
|
| ASTM C 1364-2007
| 建筑铸石的标准规范
| Standard Specification for Architectural Cast Stone
|
| ASTM C 1375-1997
| 用于测试建筑物密封和胶粘剂的基质的标准指南
| Standard Guide for Substrates Used in Testing Building Seals and Sealants
|
| ASTM C 1386-2007
| 预制增压加气混凝土墙(PAAC)建筑部件的标准规范
| Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units
|
| ASTM C 141-1997
| 建筑结构用水硬性熟石灰标准规范
| Standard Specification for Hydraulic Hydrated Lime for Structural Purposes
|
| ASTM C 1483-2004
| 建筑物外部防太阳辐射涂层的标准规范
| Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
|
| ASTM C 1498a-2004
| 建筑材料的吸湿等热性的标准试验方法
| Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
|
| ASTM C 1501-2004
| 用实验室加速风化程序测定建筑物密封材料颜色稳定性的标准试验方法
| Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
|
| ASTM C 1519-2004
| 用实验室加速老化程序评价建筑物结构密封剂耐用性的标准规程
| Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
|
| ASTM C 1532-2006
| 已有建筑中人造圬工组装件和圬工样品的选择、拆除和装运标准实施规程
| Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
|
| ASTM C 1589-2005
| 建筑密封件和密封剂的室外老化的标准规程
| Standard Practice for Outdoor Weathering of Construction Seals and Sealants
|
| ASTM C 1630-2006
| 制定松散填充建筑物热绝缘材料覆盖区域的标准指南
| Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
|
| ASTM C 1642-2007
| 气溶胶泡沫填缝剂和其它建筑填缝及绝缘材料漏气率的测定用标准实施规程
| Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
|
| ASTM C 212-2000
| 建筑用饰面瓷砖的标准规范
| Standard Specification for Structural Clay Facing Tile
|
| ASTM C 272-2001
| 结构夹层建筑用芯材吸水性的标准试验方法
| Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
|
| ASTM C 274-2007
| 夹层结构建筑物标准术语
| Standard Terminology of Structural Sandwich Constructions
|
| ASTM C 367-2005
| 预制建筑用吸音砖和镶入式天花板的强度性能的标准试验方法
| Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
|
| ASTM C 43-2006
| 建筑用粘土制品的标准术语
| Standard Terminology of Structural Clay Products
|
| ASTM C 5-2003
| 建筑用生石灰标准规范
| Standard Specification for Quicklime for Structural Purposes
|
| ASTM C 55-2006
| 混凝土建筑物砖的标准规范
| Standard Specification for Concrete Building Brick
|
| ASTM C 567a-2005
| 测定建筑轻质混凝土密度的标准试验方法
| Standard Test Method for Determining Density of Structural Lightweight Concrete
|
| ASTM C 62-2005
| 建筑砖(粘土或页岩制实心砌块)的标准规范
| Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
|
| ASTM C 634-2002
| 与建筑物和环境声学相关的标准术语
| Standard Terminology Relating to Building and Environmental Acoustics
|
| ASTM C 653-1997
| 建筑物隔热用低密度矿物纤维毡阻热系数的测定的标准指南
| Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
|
| ASTM C 656-2007
| 建筑用硅酸钙隔热板的标准规范
| Standard Specification for Structural Insulating Board, Calcium Silicate
|
| ASTM C 670-2003
| 制定建筑材料试验方法用精密度和偏差说明的标准实施规程
| Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
|
| ASTM C 687-2005
| 测定松填建筑绝热材料热阻的标准实施规程
| Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
|
| ASTM C 717a-2007
| 建筑物密封件和密封剂的标准术语
| Standard Terminology of Building Seals and Sealants
|
| ASTM C 724-1991
| 建筑装饰玻璃上陶瓷装璜耐酸性的试验方法
| Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
|
| ASTM C 727-2001
| 建筑结构中反射隔热的装置及应用标准实施规程
| Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
|
| ASTM C 802-1996
| 为确定建筑材料试验方法精确度而实行实验室间试验程序的标准实施规程
| Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
|
| ASTM C 823/C 823M-2007
| 建筑物中硬化混凝土的检验和取样用标准实施规程
| Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
|
| ASTM C 991-2003
| 金属建筑物用挠性玻璃纤维绝缘材料标准规范
| Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
|
| ASTM D 1751-2004
| 混凝土铺面和结构建筑用预制伸缩缝填料的标准规范(非挤压和弹性沥青型)
| Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
|
| ASTM D 1752a-2004
| 混凝土铺面和结构建筑用预制微孔橡胶软木和可回收的PVC膨胀接缝填料的标准规范
| Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
|
| ASTM D 2064-1991
| 建筑涂料抗污染性的标准试验方法
| Standard Test Method for Print Resistance of Architectural Paints
|
| ASTM D 3381-2005
| 路面建筑用粘度分级沥青水泥的标准规范
| Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
|
| ASTM D 3450-2000
| 内用建筑涂层可洗性的标准试验方法
| Standard Test Method for Washability Properties of Interior Architectural Coatings
|
| ASTM D 3665-2007
| 建筑材料的随机采样用标准实施规程
| Standard Practice for Random Sampling of Construction Materials
|
| ASTM D 3930a-1993
| 造房用木质建筑材料用胶粘剂的标准规范
| Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
|
| ASTM D 3957-2006
| 确立原木建筑物用结构构件应力分级的标准实施规范
| Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
|
| ASTM D 4216-2006
| 硬质聚氯乙烯(PVC)和相关PVC和氯化聚氯乙烯(CPVC)建筑产品化合物的标准规范
| Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
|
| ASTM D 4226-2005
| 硬质聚氯乙烯(PVC)建筑产品耐冲击性的标准试验方法
| Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
|
| ASTM D 4397-2002
| 建筑、工业和农业用聚乙烯薄板标准规范
| Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
|
| ASTM D 448a-2003
| 道路和桥梁建筑用集料粒度的标准分类
| Standard Classification for Sizes of Aggregate for Road and Bridge Construction
|
| ASTM D 4803-1997
| 聚氯乙烯(PVC)建筑产品中预测生热性的标准试验方法
| Standard Test Method for Predicting Heat Buildup in PVC Building Products
|
| ASTM D 4851-2007
| 建筑用涂层织物和层叠织物的标准试验方法
| Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
|
| ASTM D 4946-1989
| 建筑涂料耐结块的试验方法
| Test Method for Blocking Resistance of Architectural Paints
|
| ASTM D 5107-2003
| 建筑用砂岩表面预清理的标准实施规范
| Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
|
| ASTM D 5146-2003
| 溶媒型建筑涂料试验的标准指南
| Standard Guide to Testing Solvent-Borne Architectural Coatings
|
| ASTM D 5150-1992
| 建筑涂料用滚子遮盖率的试验方法
| Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
|
| ASTM D 5324-2003
| 水溶性建筑涂料试验的标准指南
| Standard Guide for Testing Water-Borne Architectural Coatings
|
| ASTM D 5791-1995
| 建筑物中室内空气质量研究用概率取样法的标准导则
| Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
|
| ASTM D 6910-2004
| 粘土建筑泥浆的马氏漏斗粘度的标准试验方法
| Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
|
| ASTM D 6950-2004
| 新建筑物平台用热力可焊无规聚丙烯改良沥青防水薄膜材料应用的标准规程
| Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
|
| ASTM E 1057-2006
| 建筑物和建筑系统投资的内部回报率和调整的内部回报率的测算的标准实施规程
| Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
|
| ASTM E 1074-2006
| 测算建筑物和建筑系统投资的净收益和净节存的标准实施规程
| Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
|
| ASTM E 1121-2007
| 建筑物和建筑物系统的投资回报率测量用标准实施规程
| Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
|
| ASTM E 1185-2007
| 建筑物和建筑系统中投资评价的经济方法选择用标准指南
| Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
|
| ASTM E 1186-2003
| 建筑物外层和空障系统漏气现场检测的标准实施规程
| Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
|
| ASTM E 119a-2007
| 建筑结构和材料燃烧试验的标准试验方法
| Standard Test Methods for Fire Tests of Building Construction and Materials
|
| ASTM E 1300-2007
| 建筑玻璃耐荷载性测定的标准实施规程
| Standard Practice for Determining Load Resistance of Glass in Buildings
|
| ASTM E 1334-1995
| 评定建筑物或相关建筑设施耐用性的标准实施规程
| Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
|
| ASTM E 1369-2007
| 建筑物和建筑系统经济评估中处理不确定性和风险的选择技术标准指南
| Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
|
| ASTM E 1399-1997
| 建筑连接系统最小和最大连接宽度的测量和循环运动的标准试验方法
| Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
|
| ASTM E 1464-1992
| 商用和研究用建筑物及设施的能源发展监督协议
| Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
|
| ASTM E 1465a-2007
| 新型低层住宅建筑物设计与建造用氡控制选项的标准实施规程
| Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
|
| ASTM E 1480-1992
| 设备管理的标准术语(与建筑相关的)
| Standard Terminology of Facility Management (Building-Related)
|
| ASTM E 1481a-2000
| 建筑物用护栏装置和围栏的标准术语
| Standard Terminology of Railing Systems and Rails for Buildings
|
| ASTM E 1494-1992
| 建筑材料中喷涂或镘刀涂抹的易碎石棉用密封的标准实施规程
| Standard Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials
|
| ASTM E 1557-2005
| 建筑构件及相应现场工作的标准分类.统一格式Ⅱ
| Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
|
| ASTM E 1605-2004
| 与建筑物中铅有关的标准术语
| Standard Terminology Relating to Lead in Buildings
|
| ASTM E 1612-1994
| 建筑物和停车场结构用预成形建筑压缩密封件标准规范
| Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
|
| ASTM E 1664a-1995
| 办公设备对于布局和建筑物因素的适用性标准分类
| Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
|
| ASTM E 1677-2005
| 低拱屋架建筑物墙壁用空气阻挡(AR)材料或系统标准规范
| Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
|
| ASTM E 1679-1995
| 建筑物或建筑物有关设备适用性装配要求的标准实施规程
| Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
|
| ASTM E 1699-2000
| 建筑物和建筑系统估价分析标准操作规程
| Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems
|
| ASTM E 1700-1995
| 结构和建筑物包封用办公设备的适用性标准分类
| Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
|
| ASTM E 1765-2007
| 利用分析体系过程(AHP)进行建筑物和建筑系统相关投资的多方决策分析的标准实施规范
| Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
|
| ASTM E 1783-1996
| 建筑物和停车场建筑的预制结构密封带的技术规范
| Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
|
| ASTM E 1795-2004
| 建筑物含铅漆用非增强液体涂层封装产品标准规范
| Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
|
| ASTM E 1796-2003
| 建筑物中含铅漆的液体涂层封装产品的选择和使用的标准指南
| Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
|
| ASTM E 1797-2004
| 建筑物中含铅漆用增强的液体涂层封装产品用标准规范
| Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
|
| ASTM E 1825-2006
| 建筑外墙材料、产品和系统评估的标准指南
| Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
|
| ASTM E 1827-1996
| 用风孔门测定建筑物空气密封性的标准试验方法
| Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
|
| ASTM E 1836-2001
| 设备管理用建筑物楼板面积测量的标准分类
| Standard Classification for Building Floor Area Measurements for Facility Management
|
| ASTM E 1864-2002
| 周围建筑物和相关结构中涂料、尘土、空中悬浮微粒和土壤中铅的危害评估和评估质量系统的标准实施规范
| Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures
|
| ASTM E 1908-2003
| 可浸出铅的毒性浸出过程试验用的来自于建筑改建或除铅工程中碎料废物样品选择的标准指南
| Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
|
| ASTM E 1946-2007
| 估算建筑物和建筑系统成本风险的标准实施规范
| Standard Practice for Measuring Cost Risk of Buildings and Building Systems
|
| ASTM E 1971-2005
| 商业和机构建筑物清洁管理的标准指南
| Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
|
| ASTM E 1991-2005
| 建筑材料/产品环境生命周期评定(LCA)的标准指南
| Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products
|
| ASTM E 2026-2007
| 建筑物的地震危险评估用标准指南
| Standard Guide for Seismic Risk Assessment of Buildings
|
| ASTM E 2083-2005
| 建筑施工现场要求和办公通常收益的标准分类
| Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
|
| ASTM E 2114a-2006
| 建筑物性能相关稳定性的标准术语
| Standard Terminology for Sustainability Relative to the Performance of Buildings
|
| ASTM E 2115-2006
| 评估儿童住宅建筑及其他儿童设施铅危害性的标准指南
| Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
|
| ASTM E 2121-2003
| 在已有的低层住宅建筑中安装氡减缓系统的标准实施规程
| Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
|
| ASTM E 2126-2007
| 建筑物用墙抗剪切的周期(反向)负荷试验用标准试验方法
| Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
|
| ASTM E 2128a-2001
| 评定建筑物墙壁水渗漏的标准指南
| Standard Guide for Evaluating Water Leakage of Building Walls
|
| ASTM E 2129-2005
| 建筑产品持续性评定用数据采集的标准实施规程
| Standard Practice for Data Collection for Sustainability Assessment of Building Products
|
| ASTM E 2166-2007
| 组织和管理建筑数据用标准实施规程
| Standard Practice for Organizing and Managing Building Data
|
| ASTM E 2168-2006
| 建筑结构估算中容许偏差、偶然事故和储备量的标准分类
| Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
|
| ASTM E 2178-2003
| 建筑材料透气性的标准试验方法
| Standard Test Method for Air Permeance of Building Materials
|
| ASTM E 2204-2005
| 建筑相关项目经济影响概述的标准指南
| Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
|
| ASTM E 2255-2004
| 进行建筑物中铅危害目视评定的标准实施规程
| Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
|
| ASTM E 2260-2003
| 砖石建筑古迹重嵌灰缝(砖砌体嵌凸缝)的标准指南
| Standard Guide for Repointing (Tuckpointing) Historic Masonry
|
| ASTM E 2266-2004
| 防水浸入的低层框架建筑物墙壁系统的设计和建造的标准指南
| Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
|
| ASTM E 2270-2005
| 不安全条件下建筑物正面周期性检验的标准规程
| Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
|
| ASTM E 2277-2003
| 煤灰建筑填充件的设计和制造的标准指南
| Standard Guide for Design and Construction of Coal Ash Structural Fills
|
| ASTM E 2308-2005
| 建筑物用有限石棉隔板的标准指南
| Standard Guide for Limited Asbestos Screens of Buildings
|
| ASTM E 2322-2003
| 进行地板和屋面建筑用配电板的横向和集中载荷试验的标准试验方法
| Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
|
| ASTM E 2356-2004
| 综合建筑物石棉调查的标准规程
| Standard Practice for Comprehensive Building Asbestos Surveys
|
| ASTM E 2392-2005
| 土墙建筑系统的设计标准指南
| Standard Guide for Design of Earthen Wall Building Systems
|
| ASTM E 241-2004
| 建筑物抗水损坏极限的标准指南
| Standard Guide for Limiting Water-Induced Damage to Buildings
|
| ASTM E 2418-2006
| 商用建筑中易于观测的真菌及真菌滋生条件的标准指南：基线检测程序
| Standard Guide for Readily Observable Mold and Conditions Conducive to Mold in Commercial Buildings: Baseline Survey Process
|
| ASTM E 2431-2006
| 单个上釉建筑平面玻璃对热负载耐力测定标准实施规程
| Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
|
| ASTM E 2432-2005
| 与建筑物有关的可持续性的一般原则的标准指南
| Standard Guide for General Principles of Sustainability Relative to Buildings
|
| ASTM E 2484-2006
| 超高层建筑物外部疏散缓降器的标准规范
| Standard Specification for High-Rise Building External Evacuation Controlled Descent Devices
|
| ASTM E 2513-2007
| 多层建筑物外部撤离平台营救系统用标准规范
| Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
|
| ASTM E 336-2007
| 建筑物房间之间气载噪声衰减率的标准试验方法
| Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
|
| ASTM E 455-2004
| 建筑物用构架地板或屋面薄膜结构的静负荷试验的标准方法
| Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
|
| ASTM E 514-2006
| 砖石建筑的水渗入和渗漏的标准试验方法
| Standard Test Method for Water Penetration and Leakage Through Masonry
|
| ASTM E 529-2004
| 进行房屋建筑用桁条和大梁弯曲试验的标准指南
| Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
|
| ASTM E 564-2006
| 建筑物框架墙抗剪切的静态负荷试验的标准实施规程
| Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
|
| ASTM E 569-2007
| 受控激励时建筑物声发射监测的标准实施规程
| Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
|
| ASTM E 577-1985
| 直线建筑构件及系统的尺寸协调规格
| Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems
|
| ASTM E 621-1994
| 建筑物设计和施工中米制(SI)单位的使用(E-6委员会对E308的增补)
| Standard Practice for the Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380)
|
| ASTM E 631-2006
| 建筑物结构的标准术语
| Standard Terminology of Building Constructions
|
| ASTM E 651/E 651M-2001
| 对已建成的建筑物进行系统分析和合格保证的机构的能力评价的标准实施规程
| Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
|
| ASTM E 695-2003
| 墙、楼板和屋顶建筑的相对抗冲击负荷测量的标准方法
| Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
|
| ASTM E 699-2003
| 对从事检验、质量保证和评定建筑物构件的机构进行评价的标准实施规范
| Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
|
| ASTM E 713-1988
| 米制建筑图纸标度的选择
| Standard Guide for Selection of Scales for Metric Building Drawings
|
| ASTM E 72-2005
| 建筑工程用板条的传导强度试验的标准试验方法
| Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
|
| ASTM E 833-2006
| 建筑经济学的标准术语
| Standard Terminology of Building Economics
|
| ASTM E 894-1988
| 建筑物用永久性金属围栏系统及围栏的锚定试验
| Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
|
| ASTM E 90-2004
| 实验室测量建筑物隔墙和构件的空气声音传输损失的标准试验方法
| Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
|
| ASTM E 917-2005
| 建筑物和建筑物系统使用期成本测算的标准实施规程
| Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
|
| ASTM E 935-2000
| 建筑物用永久金属围栏系统及围栏特性的标准试验方法
| Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
|
| ASTM E 964-2006
| 建筑物和建筑物系统的效益与成本和节约与投资比率测算的标准实施规程
| Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
|
| ASTM E 966-2004
| 建筑物表面和表面构件气载声音隔离的现场测量标准指南
| Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
|
| ASTM E 985-2000
| 建筑物用永久性金属围栏系统和围栏的标准规范
| Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
|
| ASTM F 1193-2006
| 娱乐骑乘和设备建筑和制造质量的实施规程
| Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
|
| ASTM F 1584-1995
| 事故查找过程中建筑物标志标准实用规程
| Standard Practice for Marking Buildings During Disaster Search Operations
|
| ASTM F 940-1999
| 海上建筑物及造船用保护性涂料的质量控制验收检验程序的标准操作规程
| Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
|
| IEEE 1226-1998
| 测试的宽底环境试行标准.总论和建筑学
| (Trial-use standard for A Broad-Based Environment for Test (ABBET) - Overview and architecture)
|
| IEEE 1516-2000
| 模型和模拟高级建筑学.框架和规则
| (Modeling and Simulation (M&S) High Level Architecture (HLA) - Framework and rules)
|
| IEEE 1516.1-2000
| 模型和模拟高级建筑学.联合接口规范
| (Modeling and simulation (M&S) High Level Architecture (HLA) - Federate interface specification)
|
| IEEE 1516.2-2000
| 模型和模拟高级建筑学.目标模板规范
| (Modeling and simulation (M&S) High Level Architecture (HLA) - Object Model Template (OMT) specification)
|
| IEEE 241-1990
| 商业建筑物电力系统推荐规程
| (Recommended practice for electric power systems in commercial buildings)
|
| IEEE Y 32.9-1972
| 在建筑和工程结构中电气配线和规划图表用图形符号
| (Graphic symbols for electrical wiring and layout diagrams used in architecture and building construction)
|
| UL 103-2001
| 住宅型及建筑物取暧装置用工厂建烟囱
| (Factory-built chimneys for residential type and building heating appliances )
|
| UL 2079-1998
| 建筑物连接系统的耐火性试验
| (Tests for fire resistance of building joint systems )
|
| UL 263-2003
| 建筑结构和材料的燃烧试验
| (Fire tests of building construction and materials)
|
| UL 723-2003
| 建筑材料表面燃烧特性的试验
| (Test for surface burning characteristics of building materials )
|
| 编号 | 中文名称 | 英文名称 |
|---|