| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI C29.8-1985 | 湿法瓷绝缘子.帽型和针型装置 | Wet-Process Porcelain Insulators - Apparatus, Cap and Pin Type |
| ANSI/AISI/COS/TS 10-2005 | 冷成型钢帽形钢柱变形抗弯强度的试验方法 | Test Method For Distortional Buckling Of Cold-formed Steel Hat Shaped Columns |
| ANSI/AISI/COS/TS 11-2005 | 冷成型钢帽形梁柔性试验方法 | Method For Flexural Testing Cold-formed Steel Hat Shaped Beams |
| ANSI/API Std.600-2001 | 石油和天然气工业用螺栓接合钢制帽状阀门 | Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries |
| ANSI/API STD600-2001 | 石油和天然气工业用栓紧帽状钢门阀 | Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries |
| ANSI/ASME B18.2.3.1M-1999 | 螺钉,米制六角型螺帽 | Screws, Metric Hex Cap |
| ANSI/ASME B18.7-2007 | 通用半管形铆钉、全管形铆钉、开口铆钉和铆钉帽 | General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets, and Rivet Caps |
| ANSI/ASTM F1163-2001 | 赛马运动和骑马用安全帽规范 | Specification for Headgear Used in Horse Sports and Horseback Riding |
| ANSI/ASTM F1446-2006 | 评定安全防护帽功能特性用设备和程序的测试方法 | Test Methods for Equipment, and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
| ANSI/ASTM F1447-2006 | 娱乐性自行车运动或滚轴滑冰用防护帽的规范 | Specification for Helmets Used in Recreational Bicycling or Roller Skating |
| ANSI/ASTM F2040-2006 | 娱乐滑雪运动用防护帽的规范 | Specification for Helmets Used for Recreational Snow Sports |
| ANSI/ASTM F2397-2005 | 军体运动用防护安全帽的规范 | Specification for Protective Headgear Used in Martial Arts |
| ANSI/ASTM F2400-2006 | 点拱顶建造用防护帽的规范 | Specification for Helmets Used in Pole Vaulting |
| ANSI/ASTM F2416-2006 | 人员辅助性移动电动设备中使用的防护帽规范 | Specification for Protective Headgear Used in Electric Personal Assistive Mobility Devices |
| ANSI/ASTM F717-1989 | 足球防护帽规范 | Specification for Football Helmets |
| ANSI/EIA 209-A-1963 | 电子管、管座、管帽及管脚(包括尺寸)的尺寸特性 | Electron Tubes, Bases, Caps, and Terminals (including Gages), Dimensional Characteristics of |
| ANSI/SAE J2295-1998 | 紧固件.零件标准帽螺钉、六角头螺栓和六角螺母 | Fasteners - Part Standard Cap Screws, Hex Bolts, and Hex Nuts |
| ANSI/SAE J483-1998 | 槽顶(盲孔、帽形)螺母 | Crown (Blind, Acorn) Nuts |
| ASME B107.9M-1994 | 斜开口端和套筒组合式螺帽和梃杆扳手(米制) | (Wrenches, box, angled, open end, combination, flare nut and tappet (Metric series)) |
| ASME B18.3.1M-1986 | 米制凹头带帽螺钉 | (Socket head cap screws (Metric series)) |
| ASME B18.3.4M-1986 | 米制内六角圆头带帽螺钉 | (Hexagon socket button head cap screws (Metric series)) |
| ASME B18.7-1972 | 通用半空心铆钉，全空心铆钉，开口铆钉及铆钉帽 | (General purpose semi-tubular rivets, full tubular rivets, split rivets and rivet caps) |
| ASTM B 129-2007 | 弹药筒黄铜弹壳帽壳的标准规范 | Standard Specification for Cartridge Brass Cartridge Case Cups |
| ASTM B 131-2007 | 铜合金弹头火帽壳的标准规范 | Standard Specification for Copper Alloy Bullet Jacket Cups |
| ASTM D 3199-1984 | 水蒸气通过螺帽闭合衬套传输的标准试验方法 | Standard Test Method for Water Vapor Transmission Through Screw-Cap Closure Liners |
| ASTM F 1045-2007 | 冰球运动员防护帽标准性能规范 | Standard Performance Specification for Ice Hockey Helmets |
| ASTM F 1163a-2004 | 马术运动和骑马用防护帽标准规范 | Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding |
| ASTM F 1446-2006 | 评估防护帽性能特征使用的设备和规程的标准试验方法 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
| ASTM F 1447-2006 | 娱乐性自行车运动或滚轴滑冰用防护帽的标准规范 | Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating |
| ASTM F 2397a-2004 | 军体运动中使用的防护安全帽标准规范 | Standard Specification for Protective Headgear Used in Martial Arts |
| ASTM F 2400-2006 | 点拱顶建造用防护帽的标准规范 | Standard Specification for Helmets Used in Pole Vaulting |
| ASTM F 2416-2006 | 人员辅助移动电气装置中使用的防护帽的标准规范 | Standard Specification for Protective Headgear Used in Electric Personal Assistive Mobility Devices |
| ASTM F 2437-2006 | 与螺旋帽、螺栓、锚和螺柱用碳和合金钢可压缩垫圈式直读张力指示器的标准规范 | Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs |
| ASTM F 2439-2006 | 英式足球用头部防护帽的标准规范 | Standard Specification for Headgear Used in Soccer |
| 编号 | 中文名称 | 英文名称 |