| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 2593-1974 | 旋转钻杆与碳化钨硬质合金旋转钻头规范 | Specification for rotary drill rods and tungsten carbide tipped rotary drill bits |
| BS 4193-2-1986 | 镶硬质合金刀具.第2部分:无固定孔的圆角可转位硬质合金(碳化物)刀片尺寸规范 | Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with rounded corners, without fixing hole |
| BS 4193-3-1997 | 镶硬质合金刀具.第3部分:带圆柱圆定孔和圆角可分度硬质合金(碳化物)刀片尺寸规范 | Hardmetal insert tooling - Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole |
| BS DD CEN/TS 12390-10-2007 | 硬化混凝土测试.混凝土相对抗碳化的测定 | Testing hardened concrete - Determination of the relative carbonation resistance of concrete |
| BS EN 12698-1-2007 | 和碳化硅耐熔制品结合的氮化物的化学分析.化学方法 | Chemical analysis of nitride bonded silicon carbide refractories - Chemical methods |
| BS EN 12698-2-2007 | 和碳化硅耐熔制品结合的氮化物的化学分析.射线衍射(XRD)法 | Chemical analysis of nitride bonded silicon carbide refractories - XRD methods |
| BS EN 13295-2004 | 混凝土结构的保护和维修用产品和系统.试验方法.抗碳化作用的测定 | Products and systems for the protection and repair of concrete structures.Test methods - Determination of resistance to carbonation |
| BS EN 13639-2002 | 石灰石中有机碳化物总含量的测定 | Determination of total organic carbon in limestone |
| BS EN 14630-2006 | 混凝土结构的保护和修整用产品和设备.试验方法.用酚酞方法对硬化混凝土中碳化作用深度的测定 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method |
| BS EN ISO 105-X01-1996 | 纺织品.色牢度试验.第X01部分:耐碳化色牢度.氯化铝法 | Textiles. Tests for colour fastness. Colour fastness to carbonizing: Aluminium chloride |
| BS EN ISO 105-X02-1996 | 纺织品.色牢度试验.第X02部分:耐碳化色牢度.硫酸法 | Textiles. Tests for colour fastness. Colour fastness to carbonizing: Sulfuric acid |
| BS EN ISO 21068-1-2008 | 含碳化硅的原材料和耐火制品的化学分析.一般信息和样品制备 | Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 1: General information and sample preparation |
| BS EN ISO 21068-2-2008 | 含碳化硅的原材料和耐火制品的化学分析.点火、总碳、单体碳和碳化硅、总二氧化硅和游离二氧化硅及总硅和游 | Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon |
| BS EN ISO 21068-3-2008 | 含碳化硅的原材料和耐火制品的化学分析.氮、氧和金属及氧化成分的测定 | Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents |
| BS ISO 15917-2007 | 用碳化物和陶瓷材料制成的柱柄实心球头端铣刀.尺寸 | Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions |
| BS ISO 2804-1996 | 金属丝、棒材或管拉伸冲模.硬金属(碳化物)烧结小球.尺寸 | Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions |
| BS ISO 9286-1997 | 磨料颗粒和粗料.碳化硅的化学分析 | Abrasive grains and crude - Chemical analysis of silicon carbide |
| 编号 | 中文名称 | 英文名称 |