| 编号 | 中文名称 | 英文名称 |
|---|
| EN ISO 2566-1-1999
| 钢伸长值的换算 第1部分：碳素钢和低合金钢
| Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
|
| ISO 10142-1996
| 铝生产用碳素材料 煅烧焦 用实验室振动磨测定粒度稳定性
| Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill
|
| ISO 10143-1995
| 铝生产用碳素材料 电极用煅烧焦 颗粒电阻率的测定
| Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules
|
| ISO 10236-1995
| 铝生产用碳素材料 电极用生焦和煅烧焦 松(紧装)密度的测定
| Carbonaceous materials for the production of aluminium - Green coke and calcined coke for electrodes - Determination of bulk density (tapped)
|
| ISO 10237-1997
| 铝生产用碳素材料 煅烧焦 残余氢含量的测定
| Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of residual-hydrogen content
|
| ISO 10238-1999
| 铝生产用碳素材料 电极用沥青 仪器法测定硫含量
| Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
|
| ISO 10384-2001
| 用化学结构定义的热轧碳素钢板
| Hot-rolled carbon steel sheet as defined by chemical composition
|
| ISO 10460-2005
| 储气瓶.焊接的碳素钢储气瓶.定期检验和试验
| Gas cylinders - Welded carbon-steel gas cylinders - Periodic inspection and testing
|
| ISO 11412-1998
| 铝生产用碳素材料 煅烧焦 水分测定
| Carbonaceous materials for the production of aluminium - Calcined coke - Determination of water content
|
| ISO 11713-2000
| 铝生产用碳素材料 阴极碳块和焙烧阳极 室温下电阻率的测定
| Carbonaceous materials used in the production of aluminium - Cathode blocks and baked anodes - Determination of electrical resistivity at ambient temperature
|
| ISO 12977-1999
| 铝生产用碳素材料 电极用沥青 挥发分的测定
| Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of volatile matter content
|
| ISO 12979-1999
| 铝生产用碳素材料 电极用沥青 喹啉不溶物中C/H比的测定
| Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of C/H ratio in the quinoline-insoluble fraction
|
| ISO 12980-2000
| 铝生产用碳素材料 电极用生焦和煅烧焦 X射线荧光分析
| Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method
|
| ISO 12981-1-2000
| 铝生产用碳素材料 煅烧焦 对二氧化碳反应性的测定 第1部分:失重法
| Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method
|
| ISO 12982-1-2000
| 铝生产用碳素材料 煅烧焦 对空气反应性的测定 第1部分:灼烧温度法
| Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to air - Part 1: Ignition temperature method
|
| ISO 12984-2000
| 铝生产用碳素材料 煅烧焦 粒度分布的测定
| Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution
|
| ISO 12985-1-2000
| 铝生产用碳素材料 焙烧阳极和阴极碳块 第1部分:用尺寸法测定表观密度
| Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 1: Determination of apparent density using a dimensions method
|
| ISO 12985-2-2000
| 铝生产用碳素材料 焙烧阳极和阴极碳块 第2部分:用静流法测定表观密度和开口孔隙率
| Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 2: Determination of apparent density and of open porosity using a hydrostatic method
|
| ISO 12986-1-2000
| 铝生产用碳素材料 预焙阳极和阴极碳块 第1部分:用三点法测定抗弯强度/剪切强度
| Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by a three-point method
|
| ISO 12986-2-2005
| 铝生产用碳素材料.预焙阳极和阴极碳块.第2部分:用四点法测定抗弯强度
| Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method
|
| ISO 12988-1-2000
| 铝生产用碳素材料 焙烧阳极 二氧化碳反应性的测定 第1部分:失重法
| Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method
|
| ISO 12988-2-2004
| 铝生产用碳素材料.焙烧阳极.二氧化碳反应性的测定.第2部分:热解重量分析法
| Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 2: Thermogravimetric method
|
| ISO 12989-1-2000
| 铝生产用碳素材料 焙烧阳极和部碳块 空气反应性的测定 第1部分:失重法
| Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 1: Loss in mass method
|
| ISO 12989-2-2004
| 铝生产用碳素材料.焙烧阳极和部碳块.空气反应性的测定.第2部分:热重分析法
| Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 2: Thermogravimetric method
|
| ISO 14422-1999
| 铝生产用碳素材料 冷压糊料 取样方法
| Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Methods of sampling
|
| ISO 14428-2005
| 铝生产用碳素材料.冷和微温冲压浆料.烘烤时的膨胀/收缩
| Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking
|
| ISO 20203-2005
| 铝生产中使用的碳素材料.煅烧焦炭.用X-射线衍射法测定煅烧石油焦的晶体粒度
| Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction
|
| ISO 2566-1-1984
| 钢 伸长值的换算 第1部分:碳素钢和低合金钢
| Steel; Conversion of elongation values; Part 1 : Carbon and low alloy steels
|
| ISO 3573-1999
| 商品级和冲压级热轧碳素钢薄板
| Hot-rolled carbon steel sheet of commercial and drawing qualities
|
| ISO 3574-1999
| 商品级和冲压级冷轧碳素钢薄板
| Cold-reduced carbon steel sheet of commercial and drawing qualities
|
| ISO 3575-2005
| 商品级和冲压级连续热镀锌碳素钢薄板
| Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
|
| ISO 4960-1999
| 碳含量大于0.25%的冷轧碳素钢带
| Cold-reduced carbon steel strip with a carbon content over 0,25 %
|
| ISO 4998-2005
| 结构质量的连续热浸锌覆层碳素薄钢板
| Continuous hot-dip zinc-coated carbon steel sheet of structural quality
|
| ISO 4999-2005
| 商用、拉制和建筑用连续热镀锡(铅合金)冷轧碳素薄钢板
| Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
|
| ISO 5000-2005
| 商品级及拉伸级连续热浸镀铝-硅冷轧碳素钢薄板
| Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
| ISO 5001-1999
| 玻璃搪瓷用冷轧碳素薄钢板
| Cold-reduced carbon steel sheet for vitreous enamelling
|
| ISO 5002-1999
| 商品级和冲压级热轧和冷轧电镀锌碳素薄钢板
| Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
|
| ISO 5931-2000
| 铝生产用碳素材料 煅烧焦和煅烧碳产品 用艾氏卡法测定全硫含量
| Carbonaceous materials used in the production of aluminium - Calcined coke and calcined carbon products - Determination of total sulfur by the Eschka method
|
| ISO 5939-1980
| 铝生产用碳素材料 电极用沥青 水含量的测定 共沸蒸馏(Dean and Stark)法
| Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of water content; Azeotropic distillation (Dean and Stark) method
|
| ISO 5940-1981
| 铝生产用碳素材料 电极用沥青 用环和球法测定软化点
| Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of softening point by the ring-and-ball method
|
| ISO 5950-2000
| 商品级和冲压级连续电镀锡冷轧碳素薄钢板
| Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
| ISO 5954-1998
| 按硬度要求冷轧碳素薄钢板
| Cold-reduced carbon steel sheet according to hardness requirements
|
| ISO 6257-2002
| 铝生产用碳素材料.电极用沥青.取样
| Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling
|
| ISO 6317-2000
| 商品级和冲压级热轧碳素钢带
| Hot-rolled carbon steel strip of commercial and drawing qualities
|
| ISO 6375-1980
| 铝生产用碳素材料 电极用焦 取样
| Carbonaceous materials for the production of aluminium; Cokes for electrodes; Sampling
|
| ISO 6376-1980
| 铝生产用碳素材料 电极用沥青 甲苯不溶物含量的测定
| Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of content of toluene-insoluble material
|
| ISO 65-1981
| 按照ISO 7/1 车螺纹的碳素钢管
| Carbon steel tubes suitable for screwing in accordance with ISO 7/1
|
| ISO 6791-1981
| 铝生产用碳素材料 电极用沥青 喹啉不溶物含量的测定
| Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of contents of quinoline-insoluble material
|
| ISO 6932-2001
| 最高含碳量为0.25%的冷轧碳素钢带
| Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
|
| ISO 6997-1985
| 铝生产用碳素材料 煅烧焦 表观油含量的测定 加热法
| Carbonaceous materials for the production of aluminium; Calcined coke; Determination of apparent oil content ; Heating method
|
| ISO 6998 Technical Corrigendum 1-1999
| 铝生产用碳素材料 电极用沥青 焦化值的测定 技术勘误1
| Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value; Technical Corrigendum 1
|
| ISO 6998-1997
| 铝生产用碳素材料 电极用沥青 焦化值的测定
| Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value
|
| ISO 6999-1983
| 铝生产用碳素材料 电极用沥青 密度的测定 比重瓶法
| Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of density; Pycnometric method
|
| ISO 8003-1985
| 铝生产用碳素材料 电极用沥青 动态粘度的测定
| Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Measurement of dynamic viscosity
|
| ISO 8004-1985
| 铝生产用碳素材料 煅烧焦和煅烧碳产品 二甲苯密度的测定 比重瓶法
| Carbonaceous materials for the production of aluminium; Calcined coke and calcined carbon products; Determination of the density in xylene; Pyknometric method
|
| ISO 8005-2005
| 铝生产用碳素材料.生焦炭和煅烧焦炭.灰分含量的测定
| Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content
|
| ISO 8006-1985
| 铝生产用碳素材料 电极用沥青 灰分的测定
| Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Determination of ash
|
| ISO 8007-1-1999
| 铝生产用碳素材料 单个材料的取样方案和取样 第1部分:阴极块
| Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 1: Cathode blocks
|
| ISO 8007-2-1999
| 铝生产用碳素材料 单个材料的取样方案和取样 第2部分:预焙阳极
| Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 2: Prebaked anodes
|
| ISO 8007-3-2003
| 铝生产用碳素材料.单个材料的取样方案和取样.第3部分:侧墙砖
| Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 3: Sidewall blocks
|
| ISO 8658-1997
| 铝生产用碳素材料 未煅烧和煅烧焦 火焰原子吸收光谱法测定痕量元素
| Carbonaceous materials for use in the production of aluminium - Green and calcined coke - Determination of trace elements by flame atomic absorption spectroscopy
|
| ISO 8723-1986
| 铝生产用碳素材料 煅烧焦 油含量的测定 溶剂萃取法
| Carbonaceous materials for the production of aluminium; Calcined coke; Determination of oil content; Method by solvent extraction
|
| ISO 9055-1988
| 铝生产用碳素材料 电极用沥青 用氧弹法测定硫含量
| Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method
|
| ISO 9088-1997
| 铝生产用碳素材料 预焙阳极和阴极块 用比重瓶法测定二甲苯密度
| Carbonaceous materials used for the production of aluminium - Cathode blocks an prebacked anodes - Determination of the density in xylene by a pyknometric method
|
| ISO 9406-1995
| 铝生产用碳素材料 焦碳 用重量分析法测定挥发物的含量
| Carbonaceous materials for the production of aluminium - Green coke - Determination of volatile matter content by gravimetric analysis
|
| ISO/TS 14423-1999
| 铝生产用碳素材料 冷压糊 通过喹啉萃取和测定聚焦体尺寸分布来测定有效粘接剂含量和聚焦体含量
| Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution
|
| ISO/TS 14425-1999
| 铝生产用碳素材料 冷压糊 未焙烧糊料的挥发物含量的测定
| Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of volatile-matter content of unbaked pastes
|
| prEN 2160-1978
| 航空航天系列 飞行器控制用涂锌碳素钢软钢丝绳、结构、尺寸、负载
| Flexible wire ropes for aircraft controls in zinc coated carbon steel; construction, dimensions, loads; Aerospace series
|
| 编号 | 中文名称 | 英文名称 |
|---|