| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI C37.06-2000
| 开关装置.对称电流限定的交流高压断路器.优先额定值和相应要求性能
| Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities
|
| ANSI C37.06.1-2000
| 快速瞬时恢复压升时间(非美国标准)用指定对称电流基础额定值的高压断路器试用指南
| Trial-Use Guide for High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Designated "Definite Purpose for Fast Transient Recovery Voltage Rise Times" (NOT AN AMERICAN NATIONAL STANDARD)
|
| ANSI C37.06a-1989
| 开关装置.对称电流限定的交流高压断路器.优先额定值和相应要求性能
| Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities
|
| ANSI C82.7-1983
| 水银灯变压器.恒定电流(系列)供电型
| Mercury Lamp Transformers - Constant-Current (Series) Supply Type
|
| ANSI C82.8-1988
| 灯变压器.白炽灯变压器.恒定电流(系列)供电型
| Lamp Transformers - Incandescent Filament Lamp Transformers - Constant-Current (Series) Supply Type
|
| ANSI T1.337-2004
| 网络电力传输系统的最大电压、电流和功率级的要求
| Requirements for Maximum Voltage, Current, and Power Levels in Network-Powered Transport System
|
| ANSI/ASTM A966-1996
| 用交流电流检验钢锻件磁粒的试验方法
| Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
|
| ANSI/ASTM D495-1999
| 固体电绝缘的高压、低电流和干电弧电阻试验方法
| Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
|
| ANSI/AWWA D104-2004
| 自动控制的钢制水箱内部的外加电流阴极保护
| Automatically Controlled, Impressed-Current Cathodic Protection for the Interior of Steel Water Tanks
|
| ANSI/EIA 364-70A-1998
| 电流对电连接器温度升高影响的试验程序
| Test Procedure for Current vs Temperature Rise of Electrical Connectors
|
| ANSI/EIA 520F000-A-1996
| 已质量认证的旋转式开关分规范(2安培或以下的低电流)
| Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less)
|
| ANSI/EIA 520FAAA-1995
| 已质量认证的(低电流)最大12位置的旋转式开关的详细规范
| Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 12 Positions Maximum
|
| ANSI/EIA 520FAAB-1995
| 已质量认证的(低电流)最大16位置的旋转式开关的详细规范
| Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 16 Positions Maximum
|
| ANSI/EIA-364-70A-1998
| 电连接器的电流与温升关系的试验程序
| Test Procedure for Current vs Temperature Rise of Electrical Connectors
|
| ANSI/EIA-520F000-A-1996
| 质量认证的专用旋转式开关分规范(低电流容量:2安培及2安培以下)
| Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less)
|
| ANSI/EIA-520FAAA-1995
| 质量认证的(低额定电流)最大12位旋转式开关详细规范
| Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 12 Positions Maximum
|
| ANSI/EIA-520FAAB-1995
| 已获质量认证的(低额定电流)16位置旋转式开关详细规范
| Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 16 Positions Maximum
|
| ANSI/IEEE C37.010-1999
| 基于对称电流的交流高压断路器应用指南
| Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
|
| ANSI/IEEE C37.012-2005
| 交流高压断路器用电容性电流开关的应用指南
| Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers
|
| ANSI/IEEE C37.015-1993
| 并联电抗器电流转换用交流高压断路器的应用指南
| Application Guide for AC High Voltage Circuit Breakers for Shunt Reactor Current Switching
|
| ANSI/IEEE C37.04-1999
| 基于对称电流的交流高压断路器额定结构
| Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
|
| ANSI/IEEE C37.081a-1998
| 额定对称电流基础上的交流高压断路器的综合故障试验指南
| Guide for Synthetic Fault Testing of AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis
|
| ANSI/IEEE C37.082-1982
| 交流电流断路器声压级的测量
| Sound Pressure Levels of AC Power Circuit Breakers, Measurement of
|
| ANSI/IEEE C37.09-1999
| 基于对称电流的交流高压断路器试验程序
| Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
|
| ANSI/IEEE C37.09a-2005
| 基于对称电流的交流(AC)高压断路器标准试验程序.修改件1:电容电流开关
| Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching
|
| ANSI/IEEE C37.11-1997
| 对称电流基础上的AC高压断路器的电气控制标准要求
| Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
|
| ANSI/IEEE C37.110-1996
| 保护继电器用电流互感器使用指南
| Guide for the Application of Current Transformers Used for Protective Relaying Purposes
|
| ANSI/IEEE C37.20.1a-2005
| 金属壳密封的低压电力线路断路器开关设备标准.修改1:短时间和短路可耐电流测试;多电缆连接的最小区域
| Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections
|
| ANSI/IEEE C37.36b-1990
| 有灭弧的空气开关电流断路指南
| Guide to Current Interruption with Horn Gap Air Switches
|
| ANSI/IEEE C37.72-1999
| 电流系统用的配有装载/中断开关和可分连接器的手工操作正面不带电面板上安装的开关设备标准
| Standard for Manually-Operated Dead-Front Padmounted Switchgear with Load/Interrupting Switches and Separable Connectors for Alternating-Current Systems
|
| ANSI/IEEE C37.92-2005
| 保护电压和电流传感器中继电器的模拟输入标准
| Standard for Analog Inputs to Protective Relays From Electronic Voltage and Current Transducers
|
| ANSI/IEEE C57.109-1993
| 液浸式变压器穿越故障电流持续时间的指南
| Guide for Liquid-Immersed Transformer Through-Fault Current Duration
|
| ANSI/IEEE C57.110-2004
| 施加非正弦负载电流时变压器性能确定的推荐实施规程
| Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
|
| ANSI/IEEE C57.12.59-2002
| 干式变压器全故障电流持续时间指南
| Guide for Dry-Type Transformer Through-Fault Current Duration
|
| ANSI/IEEE C57.13.1-1981
| 继电器用的电流变压器现场测试指南
| Field Testing of Relaying Current Transformers
|
| ANSI/IEEE C62.23-2001
| 发电厂电流波动保护装置的应用指南
| Application Guide for Surge Protection of Electric Generating Plants
|
| ANSI/IEEE C95.2-2005
| 射频能量和电流符号的标准
| Standard for Radio-Frequency Energy and Current-Flow Symbols
|
| ANSI/ISA S82.02.04-1996
| 测量、控制和实验室用电气设备的安全要求.第2-032部分:电测量和试验用手持电流线夹的特殊要求
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test
|
| ANSI/SAE J551/13-1996
| 车辆电磁干扰.体电流输入
| Vehicle Electromagnetic Immunity - Bulk Current Injection
|
| ANSI/TIA/EIA 455-128-1996
| 半导体激光器阈值电流的测定程序
| Procedures for Determining Threshold Current of Semiconductor Lasers
|
| ANSI/UL 101-2002
| 器具泄漏电流
| Leakage Current for Appliances
|
| ANSI/VITA 1.7-2003
| 96针及160针DIN/IEC连接器标准用增长的电流等级
| Increased Current Level for 96 Pin & 160 Pin DIN/IEC Connector Standard
|
| ASTM A 772/A 772M-2000
| 正弦电流用材料的交流磁导率的标准试验方法
| Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
|
| ASTM A 927/A 927M-2004
| 使用伏特计-电流计-瓦特计方法测试环形铁芯试样交流磁性能的标准试验方法
| Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
|
| ASTM A 966/A 966M-1996
| 用交替电流检验锻钢磁性微粒的标准试验方法
| Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
|
| ASTM B 714-1982
| 复合超导体D-C临界电流的试验方法
| Test Method for D-C Critical Current of Composite Superconductors
|
| ASTM D 3809-2001
| 电容器用合成介电流体的标准试验方法
| Standard Method for Testing Synthetic Dielectric Fluids For Capacitors
|
| ASTM D 495-1999
| 固体电绝缘材料的耐高压低电流干电弧性能的测试方法
| Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
|
| ASTM D 5089-1995
| 用电磁电流仪测量明渠水流速度的标准试验方法
| Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
|
| ASTM D 6208-1997
| 通过电流静态测量对铝及其合金折回潜力测定的标准试验方法
| Standard Test Method for repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
|
| ASTM D 6888-2004
| 用气体扩散分离和电流计探测法对有效氰化物进行配位位移和流量注入分析的标准试验方法
| Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
|
| ASTM E 426-1998
| 无缝焊接管形产品、奥氏体不锈钢的类似合金的电磁(涡电流)检验
| Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys
|
| ASTM E 566-1999
| 黑色金属的电磁(涡电流)分级
| Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
|
| ASTM E 571-1998
| 镍及镍合金管形制品的电磁(涡电流)检验
| Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
|
| ASTM E 684-2004
| 固体表面溅射深度仿形加工用大直径离子束的电流密度近似测定的标准规程
| Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces
|
| ASTM E 690-1998
| 无磁热交换管的现场电磁(涡电流)检验
| Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes
|
| ASTM F 2550-2006
| 通过电扫描电流流经管壁的振动确定下水管道漏洞方位的标准实施规程
| Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall |
| ASTM F 448-1999
| 测量稳态原始光电流的标准试验方法
| Test Method for Measuring Steady-State Primary Photocurrent
|
| ASTM F 615M-1995
| 测定在半导体元件上喷镀金属的安全电流脉冲操作区域的标准实施规范(米制)
| Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components [Metric]
|
| ASTM F 676-1997
| 测量不饱和的晶体管逻辑电路吸收电流的试验方法
| Standard Test Method for Measuring Unsaturated TTL Sink Current
|
| ASTM F769M-1995
| 测量晶体管和二极漏泄电流的标准试验方法
| Standard Test Method for Measuring Transistor and Diode Leakage Currents Metric
|
| ASTM G 100-1989
| 循环电流梯级极化的测试方法
| Test Method for Conducting Cyclic Galvanostaircase Polarization
|
| ASTM G 116-1999
| 大气电流腐蚀用绕线螺栓试验
| Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
|
| ASTM G 71-1981
| 电解液中电流腐蚀测试的实施和评定
| Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
|
| ASTM G 82-1998
| 预测电流腐蚀特性用电流系列的制定和使用标准指南
| Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
|
| IEEE 1216-2000
| 200A单相地下住宅分布用故障电流指示器的应用指南
| (Guide for the application of faulted circuit indicators for 200 A, single-phase underground residential distribution (URD))
|
| IEEE 1247-1998
| 额定电压在1000V以上选择电流的断路器开关
| (Interrupter switches for alternating current, rated above 1000 volts)
|
| IEEE C 37.010-1999
| 基于平衡电流的额定交流高压断路器应用指南
| (Application guide for AC high-voltage circuit breakers rated on a symmetrical current basis)
|
| IEEE C 37.011-1994
| 基于平衡电流的额定交流高压断路器瞬变恢复电压应用指南
| (Application guide for transient recovery voltage for ac high-voltage circuit breakers rated on a symmetrical current basis)
|
| IEEE C 37.012-1979
| 基于平衡电流的额定交流高压断路器电容电流转换的应用指南
| (Application guide for capacitance current switching for ac high-voltage circuit breakers rated on a symmetrical current basis)
|
| IEEE C 37.013-1997
| 基于平衡电流的交流高压发电机断路器
| (AC high-voltage generator circuit breakers rated on a symmetrical current basis)
|
| IEEE C 37.04a-2003
| 基于平衡电流的交流高压断路器的额定结构.修改件1:电容电流开关
| (Rating structure for AC high-voltage circuit breakers rated on an symmetrical current basis - Amendment 1: Capacitance current switching)
|
| IEEE C 37.081-1981
| 按平衡电流标定的交流高压断路器的综合故障检测指南
| (Guide for synthetic fault testing of ac high-voltage circuit breakers rated on a symmetrical current basis)
|
| IEEE C 37.081a-1997
| 额定在均衡电流基础上的交流高压断路器模拟故障试验指南补充.8.3.2:终端故障恢复电压.不平衡短路电流
| (Supplement to guide for synthetic fault testing of AC high-voltage circuit breakers rated on a symmetrical current basis - 8.3.2: Recovery voltage for terminal faults - Asymmetrical short-circuit curr)
|
| IEEE C 37.09-1999
| 基于平衡电流的额定交流高压断路器的试验程序
| (Test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis)
|
| IEEE C 37.11-1997
| 对衬电流基础上的AC高压断路器的电气控制
| (Electrical control for AC high-voltage circuit breakers rated on a symmetrical current basis)
|
| IEEE C 37.110-1996
| 用于防护继电的电流互感器使用指南
| (Guide for the application of current transformers used for protective relaying purposes)
|
| IEEE C 57.110-1998
| 施加非正弦负载电流的变压器性能确定的推荐规程
| (Recommended practice for establishing transformer capability when supplying nonsinusoidal load currents)
|
| IEEE C 57.12.59-2001
| 干式变压器直通故障电流持续时间指南
| (Guide for dry-type transformer through-fault current duration)
|
| IEEE C 57.13.1-1981
| 中继电流变压器现场试验指南
| (Guide for field testing of relaying current transformers)
|
| IEEE C 57.19.03-1996
| 直流电流用套管的术语,要求和试验规程
| (Requirements, terminology and test code for bushings for DC applications)
|
| IEEE C 95.2-1999
| 射频能量和电流的符号
| (Radio-frequency energy and current-flow symbols)
|
| UL 101-2002
| 设备的泄漏电流
| (Leakage current for appliances )
|
| UL 1416-1999
| 收音机和电视类设备用过电流和过温度保护器
| (Overcurrent and overtemperature protectors for radio- and television-type appliances )
|
| UL 498A-1999
| 电流分接头和适配器
| (Current taps and adapters )
|
| 编号 | 中文名称 | 英文名称 |
|---|