| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 1438-2004 | 集料.生物渗透滤器介质用单一粒度集料 | Aggregates - Single-sized aggregates for use as a medium in biological percolating filters |
| BS 3406-1-1986 | 粒度分布测定方法.第1部分:粉末取样指南 | Methods for determination of particle size distribution - Guide to powder sampling |
| BS 3406-8-1997 | 粒度分布测定方法.第8部分:光子相干谱 | Methods for determination of particle size distribution - Photon correlation spectroscopy |
| BS 3406-9-1997 | 粒度分布测定法.第9部分:过滤器阻塞(死网眼)法推荐标准 | Methods for determination of particle size distribution - Recommendations for the filter blockage method (mesh obscuration) |
| BS 3482-7-1991 | 干燥剂试验方法.第7部分:粒度测定 | Methods of test for desiccants - Determination of particle size |
| BS 3625-1963 | 粉末粒度测定用目镜和网格分度镜规范 | Specification for eyepiece and screen graticules for the determination of the particle size of powders |
| BS 4140-24-1987 | 氧化铝试验方法.第24部分:粒度分布测定(电铸筛分法) | Methods of test for aluminium oxide - Determination of fine particle size distribution (method using electroformed sieves) |
| BS 4427-5-1974 | 工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.粒度分布的测定 | Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of particle size distribution |
| BS 5663-2-1987 | 铁矿石试验方法.第2部分:用筛分法测定粒度分布 | Methods of testing iron ores - Determination of size distribution by sieving |
| BS 5688-13-1979 | 工业用硼酸、氧化硼、四硼酸二钠、高硼酸钠与粗硼酸钠的试验方法.用机械筛分法测定过硼酸钠粒度分布 | Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of particle size distribution of sodium perborates by mechanical sieving |
| BS 5752-10-1986 | 咖啡与咖啡制品试验方法.第10部分:速溶咖啡.粒度分析 | Methods of test for coffee and coffee products - Instant coffee: size analysis |
| BS 5752-5-1991 | 咖啡与咖啡制品试验方法.第5部分:生咖啡手工筛分粒度分析 | Methods of test for coffee and coffee products - Green coffee: size analysis by manual sieving |
| BS 6043-2.12-1994 | 制铝工业用炭素材料取样与试验方法.第2部分:电极用焦炭.第12节:碎焦粒度分布测定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution of fine coke |
| BS 6043-2.9-2000 | 制铝工业用含碳材料的取样和试验方法.电极焦炭.粒度分布的测定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution |
| BS EN 12012-2-2001 | 橡胶和塑料机.粒度减小机.多芯铰线的安全要求 | Rubber and plastics machines - Size reduction machines - Safety requirements for strand pelletisers |
| BS EN 12192-1-2002 | 混凝土结构的防护和修整用产品和系统.粒度分析.预混合泥浆干组分的试验方法 | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Test method for dry components of premixed mortar |
| BS EN 12192-2-1999 | 混凝土结构的防护和修整用产品和系统.粒度分析.聚合物粘合剂用填料的试验方法 | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Test method for fillers for polymer bonding agents |
| BS EN 12948-2002 | 石灰材料.用干湿筛选法对粒度分布进行的测定 | Liming materials - Determination of size distribution by dry and wet sieving |
| BS EN 24497-1993 | 金属粉末.用干筛法测定粒度 | Metallic powders - Determination of particle size by dry sieving |
| BS EN 481-1993 | 工作场所气氛.空气中微粒测量的粒度级定义 | Workplace atmospheres - Size fraction definitions for measurement of airborne particles |
| BS EN 623-3-2001 | 高级工程陶瓷.单片陶瓷.一般和纹理特性.粒度和粒度分布的测定(线性截取法表征) | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Determination of grain size and size distribution (characterized by the linear intercept method) |
| BS EN 933-1-1997 | 集料的几何特性试验.粒度分布测定.筛法 | Tests for geometrical properties of aggregates - Determination of particle size distribution - Sieving method |
| BS EN ISO 11125-2-1994 | 涂料和相关产品使用前钢基体的预处理.喷射金属清理磨料的试验方法.粒度分布测定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Determination of particle size distribution |
| BS EN ISO 18395-2005 | 动植物脂肪和油.用高效粒度排除色谱法(HPSEC)测定单酰甘油、二酰甘油、三酰甘油和丙三醇 | Animal and vegetable fats and oils - Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by high-performance size-exclusion chromatography (HPSEC) |
| BS EN ISO 2624-1995 | 铜及铜合金.平均粒度估计 | Copper and copper alloys - Estimation of average grain size |
| BS EN ISO 643-2003 | 钢.表面粒度的缩微照相测定 | Steels - Micrographic determination of the apparent grain size |
| BS ISO 11286-2004 | 茶.用粒度分析法进行等级分类 | Tea - Classification of grades by particle size analysis |
| BS ISO 13317-1-2001 | 用重力液体沉淀法测定粒度分布.通用原则和指南 | Determination of particle size distribution by gravitational liquid sedimentation methods - General principles and guidelines |
| BS ISO 13317-2-2001 | 用重力液体沉淀法测定粒度分布.固定移液管法 | Determination of particle size distribution by gravitational liquid sedimentation methods - Fixed pipette method |
| BS ISO 13317-3-2001 | 用重力液体沉淀法测定粒度分布.X射线重力技术 | Determination of particle size distribution by gravitational liquid sedimentation methods - X-ray gravitational technique |
| BS ISO 13318-2-2007 | 离心液体沉淀法测定粒度分布.光致离心法 | Determination of particle size distribution by centrifugal liquid sedimentation methods - Photocentrifuge method |
| BS ISO 13318-3-2004 | 用离心液体沉淀法测定粒度分布.离心X射线法 | Determination of particle size distribution by centrifugal liquid sedimentation methods - Centrifugal X-ray method |
| BS ISO 13319-2007 | 粒度分布的测定.电感线圈法 | Determination of particle size distributions - Electrical sensing zone method |
| BS ISO 13320-1-2000 | 粒度分析.激光衍射方法.一般规则 | Particle size analysis - Laser diffraction methods - General principles |
| BS ISO 13322-1-2006 | 粒度分析.图象分析方法.静态图象分析方法 | Particle size analysis - Image analysis methods - Static image analysis methods |
| BS ISO 13322-2-2006 | 粒度分析.图像分析法.静态图像分析法 | Particle size analysis - Image analysis methods - Dynamic image analysis methods |
| BS ISO 15825-2004 | 橡胶配合材料.炭黑.用盘式离心沉淀摄影法测定集料粒度分布 | Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentory |
| BS ISO 16014-1-2003 | 塑料.用粒度排除色谱法测定聚合物中平均分子量和分子量的分布.一般原则 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - General principles |
| BS ISO 16014-2-2003 | 塑料.用粒度排除色谱法测定聚合物的平均分子量和分子量的分布.通用校准法 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Universal calibration method |
| BS ISO 16014-3-2003 | 塑料.用粒度排除色谱法测定聚合物中平均分子量和分子量的分布.低温法 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Low-temperature method |
| BS ISO 16014-4-2003 | 塑料.用粒度排除色谱法测定平均分子量和分子量分布.高温法 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - High-temperature method |
| BS ISO 16564-2004 | 天然橡胶.用粒度分离色谱法测定平均分子质量和分子质量分布 | Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) |
| BS ISO 18395-2005 | 动植物脂肪和油.用高效粒度排除色谱法(HPSEC)测定单酰甘油、二酰甘油、三酰甘油和丙三醇 | Animal and vegetable fats and oils - Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by high-performance size-exclusion chromatography (HPSEC) |
| BS ISO 20203-2006 | 铝生产用碳素材料.煅烧焦炭.用X射线衍射法测定煅烧石油焦炭的晶体粒度 | Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction |
| BS ISO 22498-2006 | 塑料.氯乙烯均聚物和共聚物树脂.采用机械筛分法进行的粒度测定 | Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving |
| BS ISO 2926-2005 | 主要用于铝生产的氧化铝.45 μm至150 μm范围内的粒度分析.电刻筛分法 | Aluminium oxide used for the production of primary aluminium - Particle size analysis for the range 45 ?m to 150 ?m - Method using electroformed sieves |
| BS ISO 4365-2005 | 明渠水流.河、河渠泥沙.含沙量、粒度分布和相对密度的测定 | Liquid flow in open channels - Sediment in streams and canals - Determination of concentration, particle size distribution and relative density |
| BS ISO 6106-2005 | 磨料制品.超级磨料的磨料粒度的检验 | Abrasive products - Checking the grit size of superabrasives |
| BS ISO 6344-1-1998 | 砂布.粒度分析.粒度分布试验 | Coated abrasives - Grain size analysis - Grain size distribution test |
| BS ISO 6344-2-1998 | 砂布.粒度分析.第2部分:P12-P220粗磨料粒度分布测定 | Coated abrasives - Grain size analysis - Determination of grain size distribution of macrogrits P12 to P220 |
| BS ISO 6344-3-1998 | 砂纸.粒度分析.P240-P2500粗磨料粒度分布测定 | Coated abrasives - Grain size analysis - Determination of grain size distribution of microgrits P240 to P2500 |
| BS ISO 8486-1-1997 | 粘合磨料.粒径分布的测定和标记.第1部分:粒度范围为F4-F220 | Bond abrasives - Determination and designation of grain size distribution - Macrogrits F4 to F220 |
| BS ISO 8486-2-2007 | 粘合磨料.粒度分布的测定和标记.F230到F2000微磨粉 | Bonded abrasives - Determination and designation of grain size distribution - Microgrits F230 to F2000 |
| BS ISO 9136-2-2000 | 磨料粒度.堆积密度的测定.细磨粒 | Abrasive grains - Determination of bulk density - Microgrits - Part 2 : Microgrits |
| BS ISO 9276-1-1998 | 粒度分析结果表述.图形表述 | Representation of results of particle size analysis - Graphical representation |
| BS ISO 9276-2-2001 | 粒度分析结果的表示.从粒度分布计算平均粒度/直径和力矩 | Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions |
| BS ISO 9276-4-2002 | 粒度分析结果的表示.分类过程的特征说明 | Representation of results of particle size analysis - Characterization of a classification process |
| BS ISO 9276-5-2005 | 粒度分析结果的表示.使用对数正态概率分布的粒度分析相关计算方法 | Representation of results of particle size analysis - Methods of calculation relating to particle size analyses using logarithmic normal probability distribution |
| 编号 | 中文名称 | 英文名称 |