| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI/ASTM B664-1990 | 含80%银20%石墨的滑动触点材料规范 | Specification for 80 Silver - 20 Graphite Sliding Contact Material |
| ANSI/ASTM B692-1990 | 含75%银25%石墨的滑动触点材料规范 | Specification for 75 Silver - 25 Graphite Sliding Contact Material |
| ANSI/ASTM C1025-2000 | 石墨电极挠度的破裂系数测定方法 | Test Method for Modulus of Rupture in Bending of Electrode Graphite |
| ANSI/ASTM C1039-2000 | 石墨电极容积密度、表观比重和显气孔率的测定方法 | Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes |
| ANSI/ASTM C1179-2000 | 人造碳与石墨材料在空气中的氧化质量损耗测定方法 | Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air |
| ANSI/ASTM C559-2000 | 碳与石墨人造物测定容积密度物理测量法的试验方法 | Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles |
| ANSI/ASTM C560-2005 | 石墨化学分析的试验方法 | Test Methods for Chemical Analysis of Graphite |
| ANSI/ASTM C561-2000 | 石墨样品中灰份测试方法 | Test Method for Ash in a Graphite Sample |
| ANSI/ASTM C562-2000 | 石墨样品中湿度试验方法 | Test Method for Moisture in a Graphite Sample |
| ANSI/ASTM C611-2005 | 室温下人造碳和石墨制品电阻率的试验方法 | Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature |
| ANSI/ASTM C625-2000 | 在石墨上进行放射试验结果报道的实施规程 | Practice for Reporting Irradiation Results on Graphite |
| ANSI/ASTM C651-2000 | 在室内温度条件下利用四点加载进行碳与石墨人造物挠曲强度试验方法 | Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature |
| ANSI/ASTM C662-2005 | 抗渗石墨管和螺纹的规范 | Specification for Impervious Graphite Pipe and Threading |
| ANSI/ASTM C695-2000 | 碳与石墨压强试验方法 | Test Method for Compressive Strength of Carbon and Graphite |
| ANSI/ASTM C709-2009 | 人造碳及石墨的相关术语 | Terminology Relating to Manufactured Carbon and Graphite |
| ANSI/ASTM C714-2005 | 热脉动法进行碳和石墨热扩散的试验方法 | Test Method for Thermal Diffusivity of Carbon and Graphite by a Thermal Pulse Method |
| ANSI/ASTM C747-2005 | 用声谐振法测定碳和石墨材料弹性模量和基频的试验方法 | Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance |
| ANSI/ASTM C748-2005 | 石墨材料洛氏硬度的试验方法 | Test Method for Rockwell Hardness of Graphite Materials |
| ANSI/ASTM C749-2008 | 碳和石墨拉伸应力-应变用试验方法 | Test Method for Tensile Stress-Strain of Carbon and Graphite |
| ANSI/ASTM C769-2009 | 在制造碳和石墨材料获取近似杨氏弹性模量中声速的试验方法 | Test Method For Sonic Velocity In Manufactured Carbon And Graphite Materials For Use In Obtaining An Approximate Young S Modulus |
| ANSI/ASTM C781-2008 | 高温冷却气体核反应堆用石墨和硼化石墨部件测试用实施规程 | Practice for Testing Graphite and Boronated Graphite Components for High-Temperature Gas-Cooled Nuclear Reactors |
| ANSI/ASTM C783-2000 | 石墨电极核心取样的实施规程 | Practice for Core Sampling of Graphite Electrodes |
| ANSI/ASTM C808-2000 | 人造碳和石墨轴承与密封材料的摩擦力和磨损结果报告指南 | Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials |
| ANSI/ASTM C816-2005 | 用燃烧碘量滴定法测定石墨中硫的试验方法 | Test Method for Sulfur in Graphite by Combustion-iodometric Titration Method |
| ANSI/ASTM C838-2001 | 人造砷-碳与石墨塑型容积密度测试方法 | Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes |
| ANSI/ASTM D7219-2008 | 同向性和接近同向性核石墨用规范 | Specification for Isotropic and Near-Isotropic Nuclear Graphites |
| ANSI/ASTM D7301-2008 | 适用于受低中子Irr Adiation剂量影响元件的核石墨用规范 | Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irr Adiation Dose |
| ANSI/ASTM D7542-2009 | 空气中碳和石墨动力学氧化反应标准试验方法的试验方法 | Test Method For Standard Test Method For Air Oxidation Of Carbon And Graphite In The Kinetic Regime |
| ANSI/ASTM F2168-2002 | 包装材料规范.石墨波纹带或网纹带和模制环规范 | Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape and Die-Formed Ring |
| ANSI/ASTM F2191-2002 | 石墨或碳编织纱线包装材料规范 | Specification for Packing Material, Graphitic or Carbon Braided Yarn |
| ASTM A247-2010 | 铁铸件中石墨微观结构的评定标准试验方法 | Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings |
| ASTM B664-1990(2006) | 含80%银20%石墨的滑动电接触材料标准规范 | Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material |
| ASTM B692-1990(2006) | 含75%银25%石墨的滑动接触材料标准规范 | Standard Specification for 75 % Silver-25 % Graphite Sliding Contact Material |
| ASTM C1025-1991(2005) | 石墨电极芯挠曲断裂模数的试验方法 | Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite |
| ASTM C1039-1985(2005) | 石墨电极的表观孔隙率、表观比重和松密度的试验方法 | Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes |
| ASTM C1466-2000(2007) | 用石墨原子反应堆吸收光谱法测定陶瓷食品器皿中铅和镉的标准试验方法 | Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware |
| ASTM C565-1993(2005) | 碳和石墨机械加工材料抗拉检验的试验方法 | Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials |
| ASTM C611-1998(2005)e1 | 室温下人造碳和石墨制品电阻率的试验方法 | Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature |
| ASTM C651-1991(2005)e1 | 在室温下用四点负荷法测定炭加工品及石墨制品挠曲强度的标准试验方法 | Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature |
| ASTM C748-1998(2005) | 石墨材料洛氏硬度的试验方法 | Standard Test Method for Rockwell Hardness of Graphite Materials |
| ASTM C808-1975(2005) | 炭加工的及石墨制承重材料和密封材料的磨擦及磨蚀结果的报告标准指南 | Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials |
| ASTM D1971-2002(2006) | 用火焰原子吸收法、石墨炉原子吸收法、等离子体发射光谱法或等离子体质谱法测定金属含量用水试样浸煮的标准 | Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry |
| ASTM D4382-2002(2007)e1 | 用石墨炉原子吸收分光光度法对水中钡的标准试验方法 | Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace |
| ASTM D6071-2006 | 用石墨反应堆原子吸收光谱法测定高纯度水中低水平钠的标准试验方法 | Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy |
| ASTM D6357-2004 | 用感应耦合等离子体原子发射光谱法、感应耦合等离子体质谱法和石墨炉原子吸收光谱法测定煤、焦碳和煤利用过 | Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry |
| ASTM D7542-2009 | 标准测试空气中的碳和石墨氧化法在动力学制度 | Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime |
| ASTM E1059-1991(2006) | 非石墨反电极的形状和尺寸的标示 | Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes |
| ASTM E1184-2002 | 电热(石墨加热炉)原子吸收分析的标准实施规程 | Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis |
| ASTM E1613-2004 | 用感应耦合等离子体原子发射光谱法(ICP-AES)、火焰原子吸收光谱法(FAAS)或石墨炉原子吸收光谱技术(GFAAS)测 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
| 编号 | 中文名称 | 英文名称 |