| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| NF C66-466-1978 | 架空线路用绝缘子和器材.金具.撑杆挂钩（ＣＲ） | (INSULATORS AND FITTINGS FOR OVERHEAD LINES. METAL FITTINGS. STAY-HOOK (CR).) |
| NF E25-610-1985 | 木螺钉.螺丝钩 | (WOODSCREWS. SCREW-HOOKS.) |
| NF E25-611-1985 | 木螺钉.直角弯头螺丝钩 | (WOODSCREWS. SQUARE BEND SCREW HOOKS.) |
| NF E25-850-1985 | 紧固件.直角弯钩 | (FASTENERS. SQUARE BEND HOOKS.) |
| NF E26-107-1993 | 叶片链,挂钩和滑轮 | (Leaf chains, clevises and sheaves.) |
| NF E52-030-1987 | 起重配件.碳钢尖嘴和杆的吊钩 | (LIFTING APPLIANCES. SHANK HOOK MADE OF CARBON STEEL.) |
| NF E52-031-1987 | 起重配件.合金钢尖嘴和杆的吊钩 | (LIFTING APPLIANCES. SHANK HOOK MADE OF ALLOYED STEEL.) |
| NF E52-032-1973 | 最大毛重３０．４８０T集装箱提升钩装置.规范 | (DEVICE WITH HOOKS FOR LIFTING FREIGHT CONTAINERS OF UP TO 30.480 TONNES CAPACITY. REQUIREMENTS.) |
| NF E52-034-1987 | 起重配件.带尖嘴和眼环的吊钩.Ｍ级吊钩 | (LIFTING APPLIANCES. LIFTING HOOKS WITH POINT AND EYE. HOOKS OF GRADE M.) |
| NF E52-037-2-2000 | 吊链元件.安全性.第2部分:有栓的锻压钢提钩.8级 | (Components for slings - Safety - Part 2 : forged steel lifting hooks with latch - Grade 8.) |
| NF E52-037-3-2001 | 吊索用元部件.安全.第3部分:8级锻钢制自锁紧吊钩 | (Components for slings - Safety - Part 3 : forged steel self-locking hooks - Grade 8.) |
| NF E52-037-5-2001 | 吊索元件.安全性.第5部分:有闩锁的锻压钢提升钩,4级 | (Components for slings - Safety - Part 5 : forged steel lifting hooks with latch - Grade 4.) |
| NF E52-142-1986 | 起重配件.L级螺纹竖钩环 | (Lifting accessories. Screwed bow shackles. Grade L.) |
| NF E52-143-1984 | 起重配件.S级的直钩环 | (LIFTING APPLIANCES. SCREWED DEE SHACKLES. GRADE S.) |
| NF E52-144-1984 | 起重配件.S级的竖钩环 | (LIFTING APPLIANCES. SCREWED BOW SHACKLES. GRADE S.) |
| NF E62-183-1983 | 拉削用的四个锁销的尾挂钩头.第1部分:综合 | (PULLERS WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 1 : GENERAL.) |
| NF E62-184-1983 | 拉削用的四个锁销的前挂钩头.第2部分：直径６到２５的主轴用挂钩头尺寸和特征 | (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 2 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BORACHES OF DIAMETERS 6 TO 25.) |
| NF E62-185-1983 | 拉削用的四个锁销的尾挂钩头.第3部分:直径２８到３２的主轴用挂钩头尺寸和特征 | (PULLERS WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 3 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 28 TO 32.) |
| NF E62-186-1983 | 拉削用的四个锁销的尾挂钩头.第4部分：直径３６到４０的主轴用挂钩头尺寸和特征 | (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 4 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 36 TO 40.) |
| NF E62-187-1983 | 拉削用的四个锁销的尾挂钩头.第5部分：直径４５到５０的主轴用挂钩头尺寸和特征 | (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 5 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 45 TO 50.) |
| NF E62-188-1983 | 拉削用的四个锁销的尾挂钩头.第6部分：直径５６到６３的主轴用挂钩头尺寸和特征 | (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 6 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 56 TO 63.) |
| NF E62-189-1983 | 拉削用的四个锁销的尾挂钩头.第7部分：直径７０到８０的主轴用挂钩头尺寸和特征 | (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 7 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 70 TO 80.) |
| NF E66-611-1983 | 内面拉削刀具.前挂钩.形状和尺寸 | (Internal broaching tools. Pull ends.) |
| NF E66-612-1983 | 内面拉削刀具.后挂钩.形状和尺寸 | (Internal broaching tools. Tail ends.) |
| NF E74-323-1972 | 螺钉螺帽紧固工具.开槽螺帽用单钩扳手 | (ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES) |
| NF F10-402-1984 | 铁路车辆. 1MN牵引钩 | (Railway transport equipment. Coupling hooks of 1 mn.) |
| NF F10-405-1988 | 铁路车辆.０. ２５ＭＮ牵引钩 | (Rolling stock. 0,25 mn coupling hook.) |
| NF F10-408-1988 | 铁路车辆. ０. ６０ＭＮ牵引钩 | (Rolling stock. 0,60 mn coupling hook.) |
| NF F10-410-1988 | 铁路车辆.1.5MN的牵引钩 | (ROLLING STOCK. 1,5 MN COUPLING HOOK.) |
| NF F10-420-1991 | 铁路车辆.牵引车辆和拖车用车钩、牵引装置及驱动齿轮装置 | (Railway rolling stock. Coupling, traction and driving gears for tractive and hauled stock.) |
| NF F31-014-1977 | 铁路车辆.公告牌用悬挂钩 | (RAILWAY TRANSPORT EQUIPMENT.SIGN SUSPENSION HOOK.) |
| NF F56-157-1978 | 铁路固定设备.通讯和信号装置架空线路用器材.软拉线用钩 | (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. HOOK FOR STAY-WIRE.) |
| NF G42-510-1977 | 纺织工业设备.导纱器.眼、轴、管和导纱钩.推荐尺寸 | (THREAD GUIDES. EYELETS,RODS,TUBES AND PIG TAIL GUIDES. RECOMMANDED VALUES.) |
| NF H50-010-2-2000 | 货架接头试验方法.第2部分:货架钉子和钩环头拉伸抗性和回缩特性的测定 | (Methods of test for pallet joints - Part 2 : determination of withdrawal and head pull-through resistance of pallet nails and staples.) |
| NF H96-403-1996 | 叉式起重车.钩接式叉臂.词汇 | (Fork-lift trucks. Hook-on type fork arms. Vocabulary.) |
| NF H96-406-1996 | 叉车.钩接式叉臂和叉臂托架.安装尺寸 | (Fork-lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions.) |
| NF J33-320-1971 | 造船工业.游艇.钩环.尺寸 | (SHIPBUILDING. YACHTING. SHACKLES. DIMENSIONS.) |
| NF L81-311-1966 | 机上起重支垫和系留环或钩环的固定 | (MOUNTING ON AIRCRAFT JACKING PADS AND MOORING RINGS OR SHACKLES. (RECH.).) |
| NF S90-520-1973 | 外科医疗器械.矫形和假肢组件.带连接挂钩的可拆卸踝骨的连接 | (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. DETACHABLE ANKLE JOINT WITH ASSEMBLY HOOK.) |
| NF S90-521-1973 | 外科医疗器械.矫形和假肢组件.连接钩 | (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. ASSEMBLY HOOK.) |
| NF U14-023-1983 | 农用车辆.拖车的机械连接装置.第2部分:U型挂钩型号.尺寸 | (AGRICULTURAL VEHICLES. MECHANICAL CONNECTIONS ON TOWING VEHICLES. PART 2 : CLEVIS TYPE. DIMENSIONS.) |
| NF U14-027-2002 | 农用车辆.牵引车上机械吊钩式连接件.试验方法和要求 | (Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements.) |
| NF U14-028-2002 | 农用车辆.拖挂车和牵引车辆之间的机械连接.第2部分:40 U型钩规范 | (Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 2 : specifications for clevis coupling 40.) |
| NF X51-001-1977 | 电缆、链和钩的合格证书和标志 | (CERTIFICATION AND MARKING OF CABLES,CHAINS AND HOOKS. (ANNEXE TO THE DIRECTIVE OF 13TH APRIL 1976 OF THE COMMISSION OF THE EUROPEAN COMMUNITIES).) |
| 编号 | 中文名称 | 英文名称 |