| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ISO 11124-1-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第1部分:一般介绍及分类 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification |
| ISO 11124-2-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第2部分:冷硬铸铁丸 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit |
| ISO 11124-3-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第3部分:高碳铸钢丸和砂 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit |
| ISO 11124-4-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第4部分:低碳铸钢丸 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot |
| ISO 11125-1-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第1部分:抽样 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling |
| ISO 11125-2-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 2: determination of particle size distribution |
| ISO 11125-3-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第3部分:硬度测定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness |
| ISO 11125-4-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第4部分:表观密度测定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density |
| ISO 11125-5-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒的百分比和微结构的测定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 5: determination of percentage defective particles and of microstructure |
| ISO 11125-6-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质测定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter |
| ISO 11125-7-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第7部分:含水量测定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture |
| ISO 11126-1 Technical Corrigendum 1-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 技术勘误1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 1 |
| ISO 11126-1 Technical Corrigendum 2-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 技术勘误2 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 2 |
| ISO 11126-1-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification |
| ISO 11126-10-2000 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第10部分:铁铅石榴石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne |
| ISO 11126-3-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第3部分:铜精炼渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag |
| ISO 11126-4-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第4部分:煤炉渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag |
| ISO 11126-5-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第5部分:镍精炼渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag |
| ISO 11126-6-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag |
| ISO 11126-7 Technical Corrigendum 1-1999 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 技术勘误1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1 |
| ISO 11126-7-1995 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide |
| ISO 11126-8-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第8部分:橄榄石砂 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand |
| ISO 11126-9-1999 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第9部分:十字石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite |
| ISO 11127-1-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第1部分:抽样 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling |
| ISO 11127-2-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 2: determination of particle size distribution |
| ISO 11127-3-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第3部分:表观密度测定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density |
| ISO 11127-4-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第4部分:通过玻璃载片试验评定硬度 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 4: assessment of hardness by a glass slide test |
| ISO 11127-5-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第5部分:含水量测定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture |
| ISO 11127-6-1993 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第6部分:通过测量电导率测定水溶性杂质 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 6: determination of water-soluble contaminants by conductivity measurement |
| ISO 11127-7-1993 | 涂装油漆和有关产品前钢材预处理 非金属喷沙清理磨料的试验方法 第7部分:水溶性氯化物的测定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 7: determination of water-soluble chlorides |
| ISO 16773-2-2007 | 油漆及清漆.高阻抗涂层试样的电化学阻抗谱(EIS).第2部分:数据采集 | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2: Collection of data |
| ISO 16773-3-2009 | 油漆和清漆.高阻抗涂层试样的电化学阻抗谱(EIS).第3部分:虚拟单元样本数据的加工和分析 | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 3: Processing and analysis of data from dummy cells |
| ISO 16773-4-2009 | 油漆及清漆.高阻抗涂层试样的电化学阻抗谱(EIS).第4部分:聚合物涂覆试样的光谱示例 | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens |
| ISO 28199-1-2009 | 油漆和清漆.有关应用工序过程的涂料系统性能评估.第1部分:相关词汇和试验盘的制备 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels |
| ISO 28199-2-2009 | 油漆和清漆.与应用过程相关的涂层系统性能评估.第2部分:颜色的稳定性,工序的遮盖力,重新溶解,喷涂吸收,湿润 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling |
| ISO 28199-3-2009 | 油漆和清漆.与应用过程相关的涂层系统性能评估.第3部分:针孔和遮盖力,气泡形成,槽沉的目视评定 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power |
| ISO 8501-2-1994 | 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分:局部去除原有涂层后钢材的除锈等级 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 8501-3-2006 | 涂装油漆和有关产品前钢材的预处理.表面清洁度的目视评定.第3部分:焊接、切边及其它表面缺陷区域的处理等级 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| ISO 8502-11-2006 | 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第11部分:水溶性硫酸盐浊度测定的现场方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
| ISO 8502-2-2005 | 涂覆油漆和相关产品前钢材衬底的预处理.表面清洁度的评定试验.第2部分:洁净表面氯化物的测定 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces |
| ISO 8502-3-1992 | 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第3部分:油漆前预处理后的钢材表面上的灰尘评定(压 | Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| ISO 8502-4-1993 | 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第4部分:油覆前凝露可能性的评定导则 | Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application |
| ISO 8502-5-1998 | 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第5部分:涂装前钢材表面上氯化物测定(离子探测管法) | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
| ISO 8502-6-2006 | 涂覆油漆和相关产品前钢材的预处理.表面清洁度的评定试验.第6部分:提取分析用可溶性杂质.Bresle法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method |
| ISO 8502-8-2001 | 涂装油漆和有关产品前钢材的预处理 表面清洁度评定试验 第8部分：现场水分折射测定方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture |
| ISO 8502-9-1998 | 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导测定法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts |
| ISO 8503-1-1988 | 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第1部分:磨料喷射清理表面粗糙度的ISO评定 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 8503-2-1988 | 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第2部分:磨料喷射清理表面的粗糙度定级方法 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure |
| ISO 8503-3-1988 | 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第3部分:ISO表面轮廓比较仪的校准方法和表 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surface profile; focusing microscope procedure |
| ISO 8503-4-1988 | 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第4部分:ISO表面轮廓比较仪的校准方法和表 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surface profile; stylus instrument procedure |
| ISO 8503-5-2003 | 涂装油漆和有关产品前钢材预处理.喷射清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
| ISO 8504-1-2000 | 涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分:总则 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles |
| ISO 8504-2-2000 | 涂装油漆和有关产品前钢材预处理.表面预处理方法.第2部分:磨料喷射清理 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning |
| ISO 8504-3-1993 | 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分:手工和动力工具清洗 | Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning |
| ISO 9117-1-2009 | 油漆和清漆.干燥试验.第1部分:穿透干燥状态和穿透干燥时间 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time |
| ISO/TR 15235-2001 | 涂装油漆和有关产品前钢材的预处理 收集的有关溶水盐污染水平的影响的信息 | Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination |
| 编号 | 中文名称 | 英文名称 |