法国泵标准(NF pump standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
NF A32-060-2001 铸造产品.泵、阀门和配件用铸钢件和镍合金铸件(内部部件和防护壳体) (Foundry products - Cast steel and nickel alloy castings for pumps, valves and fittings (enclosures and internal components).)
NF C52-121-1968 变压器.变压器油用电泵组 (TRANSFORMERS. ELECTRIC POMPS FOR TRANSFORMER OIL.)
NF C52-121M1-1974 变压器.变压器油用电泵组 (TRANSFORMERS. ELECTRIC POMPS FOR TRANSFORMER OIL.)
NF C52-121M2-1977 变压器.变压器油用电泵组 (TRANSFORMERS.ELECTRIC POMPS FOR TRANSFORMER OIL.)
NF C52-216-7-2002 电力变压器和反应堆配件.第7部分: 变压器油用电子泵 (Power transformer and reactor fittings - Part 7 : electric pumps for transformer oil.)
NF C55-409-2-2000 水轮机、蓄能泵和水泵水轮机气蚀损坏的评定.第2部分:水斗式水轮机的评定 (Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2 : evaluation in Pelton turbines.)
NF C55-420-1993 液压机(涡轮、存储泵和水泵-水轮机)的振动和脉动的现场测量指南 (Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storga pumps and pump-turbines).)
NF C55-493-2000 液压涡轮机,储存泵和泵涡轮.模型验收试验 (Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests.)
NF C57-310-1988 太阳能电能直接转换.光伏特泵装置.预见特性 (DIRECT TRANSFORMATION OF SOLAR ENERGY INTO ELECTRICAL ENERGY. PHOTOVOLTAIC PUMPING SYSTEM. PREDICTED CHARACTERISTICS.)
NF C57-335-2000 直接连接的光电(PV)泵装置的额定值 (Rating of direct coupled photovoltaic (PV) pumping systems.)
NF C73-840-2001 家用及类似用途电器的安全.第2-40部分: 电动热泵、空调器和去湿机的特殊要求 (Safety household and similar electrical appliances - Part 2-40 : particular requirements for electrical heat pumps, air conditioners and deshumidifiers.)
NF C73-841-1996 家用和类似用途电器的安全.第2部分:温度不超过35℃的液体用电泵 的特殊要求 (Safety of household and similar electrical appliances. Part 2 :particular requirements for pumps for liquids having a temperature not exceeding 35 degrees celsius.)
NF C73-851-2000 家用和类似用途电器的安全.第2-51部分:加热设备和配水设备的固定循环泵的特殊要求 (Safety of household and similar electrical appliances - Part 2-51 : particular requirements for stationary circulation pumps for heating and service water installations.)
NF C74-304-2003 医用电气设备.第2-24部分:输液泵及其控制器的安全特殊要求 (Medical electrical equipment Part 2-24 : particular requirements for the safety of infusion pumps and controllers.)
NF C93-805-6-1-1998 光纤放大器. 基本规范.第6-1部分:泵漏参数的试验方法.光信号分离器 (Optical fibre amplifiers. Basic specification. Part 6-1 : test methods for pump leakage parameters. Optical demultiplexer.)
NF E31-312-1988 油雾化燃烧器.带旋转轴和外部传动泵.尺寸 (ATOMIZING OIL BURNERS. PUMPS WITH ROTATING SHAFT AND EXTERNAL DRIVE. DIMENSIONS. (EUROPEAN STANDARD EN 225).)
NF E35-404-1-2000 制冷系统和热泵.安全和环境要求.第1部分:基本要求、定义、分类和选择标准 (Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1 : basic requirements, definitions, classification and selection criteria.)
NF E35-404-2-2000 制冷系统和热泵.安全和环境要求.第2部分:设计,结构,试验,标记和存档 (Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2 : design, construction, testing, marking and documentation.)
NF E35-404-3-2000 制冷系统和热泵.安全和环境要求.第3部分:安装地点和个人保护 (Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3 : installation site and personal protection.)
NF E35-404-4-2000 制冷系统和热泵.安全和环境要求.第4部分:操作,维护,修理和恢复 (Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4 : operation, maintenance, repair and recovery.)
NF E35-407-2002 制冷系统和热泵.限制压力的安全开关装置.要求和试验 (Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests.)
NF E35-413-2001 冷却系统和热泵.减压装置及其相应管道.计算方法 (Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation.)
NF E35-415-1998 冷冻系统和热泵.系统流程图和管道及结构图.流程图和符号 (REFRIGERATING SYSTEMS AND HEAT PUMPS. SYSTEM FLOW DIAGRAMS AND PIPING AND INSTRUMENT DIAGRAMS. LAYOUT AND SYMBOLS. (EUROPEAN STANDARD EN 1861).)
NF E35-420-2002 制冷系统和热泵.人员能力. (Refrigerating systems and heat pumps - Competence of personnel.)
NF E35-451-1998 带有电动压缩机的热泵和液体制冷包装.制冷模式.定义,试验和要求 (Liquid chilling packages and heat pumps with electrically driven compressors. Cooling mode. Definitions, testing and requirements.)
NF E35-600-2-2000 燃气吸收和吸收式空调和/或净输入热量不超过70KW的热泵用具.第2部分:合理的能量使用 (Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 2 : rational use of energy.)
NF E36-104-1-1997 带电驱动压缩机的空调器和热力泵.制冷.第1部分:术语、定义、名称和牌号 (Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Part 1 : terms, definitions and designations.)
NF E36-104-2-1997 带电驱动压缩机的空调器和热力泵.制冷.第2部分:试验和标记要求 (Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Part 2 : testing and requirements for marking.)
NF E36-104-3-1997 带电驱动压缩机的空调器和热力泵.制冷.第3部分:要求 (Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Part 3 : requirements.)
NF E38-115-1-1997 带电驱动压缩机的空调器,液体冷却设备和热力泵.暖气.第1部分:术语,定义和名称,牌号 (Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 1 : terms, definitions and designations.)
NF E38-115-2-1997 带电驱动压缩机的空调器,液体冷却设备和热力泵.暖气.第2部分:室内暖气用设备标志的检验和要求 (Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 2 : testing and requirements for marking for space heating units.)
NF E38-115-3-1997 带电驱动压缩机的空调器,液体冷却设备和热力泵.暖气.第3部分:工业用水加热用设备标志的检验和要求 (Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 3 : testing and requirements for marking for sanitary hot water units.)
NF E38-115-4-1997 带电驱动压缩机的空调器,液体冷却设备和热力泵.暖气.第4部分:工业用水加热及室内暖气用设备的要求 (Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 4 : requirements for space heating and sanitary hot water units.)
NF E44-003-2000 液体泵.泵和设施的一般术语.定义,数量,字母符号和元件 (Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units.)
NF E44-051-2001 液体泵.安全要求.静液压试验过程 (Liquid pumps - Safety requirements - Procedure for hydrostatic testing.)
NF E44-052-1986 泵.标记 (PUMPS. MARKING.)
NF E44-090-1998 液压泵和液压泵组件.一般安全要求 (Pumps and pump units for liquids. Common safety requirements.)
NF E44-125-1995 侧槽泵.PN40.公称负荷值.主要尺寸.命名系统 (SIDE CHANEL PUMPS PN 40. NOMINAL DUTY POINT, MAIN DIMENSIONS, DESIGNATION SYSTEM. (EUROPEAN STANDARD EN 734).)
NF E44-145-1988 转子动力泵.法兰盘受力和力矩.卧轴离心泵和混流量 (ROTODYNAMIC PUMPS. FORCES AND MOMENTS ON FLANGES. HORIZONTAL SHAFT CENTRIFUGAL AND MIXED FLOW PUMPS.)
NF E44-146-1988 旋转泵.法兰力和力矩.垂直轴离心泵.混流泵和轴流泵 (ROTODYNAMIC PUMPS. FORCES AND MOMENTS ON FLANGES. VERTICAL SHAFT CENTRIFUGAL,MIXED FLOW AND AXIAL PUMPS.)
NF E44-151-2002 离心泵的技术规范.2类 (Technical specifications for centrifugal pumps - Class II.)
NF E44-152-1998 离心泵的技术规范.1类 (TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS. CLASS 1. (EUROPEAN STANDARD EN ISO 9905).)
NF E44-154-1998 离心泵机械规范.三级 (TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS. CLASS III. (EUROPEAN STANDARD EN ISO 9908).)
NF E44-160-2003 无密封旋转动力泵.II级.规范 (Seal-less rotodynamic pumps - Class II - Specification.)
NF E44-165-1990 工业泵.离心泵、混流泵和轴流泵.允许的机械振动级 (Industrial pumps. Centrifugal, mixed flow and axial pumps. Allowable level for mechanical vibrations.)
NF E44-190-1975 泵.装配和安装规范 (PUMPS-INSTRUCTIONS FOR MOUNTING AND INSTALLATION.)
NF E44-201-1984 泵.收敛和辐射连接规则 (PUMPS. RECOMMENDATIONS FOR CONNECTING BY CONVERGENT AND DIVERGENT SECTIONS.)
NF E44-221-1976 泵.连接器安装时轴端的距离 (PUMPS. SHAFT END SPACING FOR COUPLING MOUNTING.)
NF E44-290-1975 泵.带或不带插件的连接器.用途和安装 (PUMPS-COUPLINGS WITH OR WITHOUT SPACING PART-PURPOSE AND MOUNTING.)
NF E44-301-1984 泵.切削液.规范 (PUMPS FOR CUTTING OILS. SPECIFICATIONS.)
NF E44-351-1987 流量测定泵.洁净水补充处理电能计量泵.试验方法 (DISPLACEMENT PUMPS. ELECTRICALLY DRIVEN PROPORTIONING PUMPS FOR WASTE WATER TREATMENT. TESTS.)
NF E44-361-1999 旋转变容泵.技术要求 (ROTARY POSITIVE DISPLACEMENT PUMPS. TECHNICAL REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14847).)
NF E44-362-2003 往复式容积泵和泵装置.技术要求 (Reciprocating positive displacement pumps and pumps units - Technical requirements.)
NF E44-401-2000 旋转动力泵.液压性能验收试验.等级1和2 (Rotodynamic pumps - Hydraulic perforamnce acceptance tests - Grades and 2.)
NF E44-420-2000 液体泵和泵部件.噪音试验规程.2级或3级精度 (Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy.)
NF E48-101-1984 液压传动.泵,发动机和变速器.量值的定义和用作符号的字母 (Hydraulic fluid power. Pumps, motors and integral transmissions. Parameter definitions and letter symbols.)
NF E48-353-2002 液力传动.活塞泵和电动机的安装法兰盘和轴端用尺寸及识别码.第2部分:米制系列 (Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2 : metric series.)
NF E48-354-1989 液压传动.容积泵和容积汽缸功率的测定 (HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS.)
NF E48-384-1992 液压动力.固定式活塞泵.由于AC级细粒粉尘污染引起的流动降缓.试验方法 (HYDRAULIC FLUID POWER. FIXED DISPLACEMENT PUMPS. FLOW DEGRADATION DUE TO CLASSIFIED AC FINE TEST DUST CONTAMINANT. TEST METHOD.)
NF E48-386-1992 气压液力传动.气载噪声级测定试验规程.第1部分:泵 (HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 1 : PUMPS.)
NF E48-388-1992 气压液力传动.气载噪声级测定试验规程.第3部分:泵.平行六面传声器阵列方法 (HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 3 : PUMPS. METHOD USING A PARALLELEPIPED MICROPHONE ARRAY.)
NF E48-390-1997 液压传动.在系统和元件中对产生压力波动等级的测定.第1部分:泵精确度法 (HYDRAULIC FLUID POWER. DETERMINATION OF PRESSURE RIPPLE LEVELS GENERATED IN SYSTEMS AND COMPONENTS. PART 1 : PRECISION METHOD FOR PUMP.)
NF E48-391-2000 液压动力.系统和元件内产生的压力波动水平的测定.泵用简化方法 (Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps.)
NF E51-290-1996 压缩机和真空泵.安全要求.第1部分:压缩机 (Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.)
NF E51-291-1996 压缩机和真空泵.安全要求.第2部分:真空泵 (Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.)
NF E86-514-2000 冷冻车辆.冷冻服务用泵 (Cryogenic vessels - Pumps for cryogenic service.)
NF J95-024-1993 游艇.电动舱底泵 (Small craft. Electrically operated bilge-pumps.)
NF J95-024/A1-2001 小艇.电气操作底舱泵 (Small craft - Electrically operated bilge-pumps.)
NF J95-062-2003 小艇.舱底泵吸系统 (Small craft - Bilge-pumping systems.)
NF L45-101-1987 航空和航天.液力、压力补偿或变量输送泵.一般要求 (Aerospace. Hydraulic, pressure compensated, variable delivery pumps. General requirements.)
NF L48-130-1948 飞机的流体装置.使用的互换性.燃料计量器、燃料泵等的接管座 (AIRCRAFT FLUID INSTALLATIONS. IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (RECH.).)
NF L48-135-1972 燃料计量器、燃料泵等接头的使用互换性(ISO 螺纹剖面和公差) (IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (ISO THREAD PROFILE AND TOLERANCES).)
NF L86-110-1958 供油泵.固定和驱动 (FEED PUMPS. MOUNTING AND DRIVE.)
NF M87-237-1-2002 石油和天然气工业用下降孔设备.人造升降机用行进腔体泵系统.第1部分:泵 (Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1 : pumps.)
NF P16-150-6-1998 建筑物外部排水和污水系统.第6部分:泵设备 (Drain and sewer systems outside buildings. Part 6 : pumping installations.)
NF P52-101-2000 泵.旋转动力泵.加热装置和家用热水装置用电效应不足200W的循环泵.要求、试验和标记 (Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking.)
NF P94-130-1992 土壤.调查与试验.泵送试验 (SOILS : INVESTIGATION AND TESTING. PUMPING TEST.)
NF P98-723-1-1994 道路施工和维护设备.沥青粘合剂泵.第1部分:试验台和方法 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. BITUMINOUS BINDER PUMPES. PART 1 : TEST BENCH AND METHOD.)
NF R13-404-1990 道路车辆.燃油泵的电连接件 (Road vehicles. Fuel pump electric connections.)
NF R16-306-1953 喷射泵连接管 (COUPLINGS FOR INJECTION PUMPS.)
NF R16-315-1982 道路车辆.柴油泵试验.第1部分:动力条件 (Fuel injection pump testing. Part 1 : dynamic conditions.)
NF R16-317-1987 道路车辆.燃油喷射泵.试验用高压管 (Road vehicles. Fuel injection pumps. High-pressure pipes for testing.)
NF R16-321-1985 道路车辆.平面底座直线固定喷油泵 (ROAD VEHICLES. BASE MOUNTED IN-LINE FUEL INJECTION PUMPS.)
NF R16-322-1985 道路车辆.喷油泵试验.静态条件 (ROAD VEHICLES. FUEL INJECTION PUMP TESTING. STATIC CONDITIONS.)
NF R16-327-1986 道路车辆.喷油泵用安装法兰.尺寸 (ROAD VEHICLES. END-MOUNTING FLANGES FOR FUEL INJECTION PUMPS. DIMENSIONS.)
NF R16-328-1994 柴油发动机.燃油注入泵.轴端和衬套楔梢 (Diesel engines. Fuel injection pumps. Tapers for shaft ends and hubs.)
NF R16-329-2000 喷油装置.词汇.第1部分:喷油泵 (Fuel injection equipment - Vocabulary - Part 1 : fuel injection pumps.)
NF R16-329/A1-2001 燃料注入设备.词汇.第1部分:燃料注入泵 (Fuel injection equipment - Vocabulary - Part 1 : fuel injection pump.)
NF R16-330-2003 道路车辆.弧形底安装直列式喷油泵.安装尺寸 (Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions.)
NF R16-333-1989 道路车辆.燃油喷射泵试验.第3部分:产品应用和试验 (ROAD VEHICLES. FUEL INJECTION PUMP TESTING. PART 3 : APPLICATION AND TEST PROCEDURES.)
NF S61-116-2003 消防水龙带.泵和水车用半硬度输水软管和软管组合件 (Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles.)
NF S63-125-1-2002 消防泵.带起动注油器的消防离心泵.第1部分:分类.总则和安全要求 (Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1 : classification - General and safety requirements.)
NF S63-125-2-2002 消防泵.带起动注油器的消防离心泵.第2部分:总则和安全要求的检定 (Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2 : verification of general and safety requirements.)
NF S93-001-2-1997 一次性使用无菌皮下注射器.第1部分:带动力注射泵的注射器 (STERILE HYPODERMIC SYRINGES FOR SINGLE USE. PART 2 : SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS. (EUROPEAN STANDARD EN ISO 7886-2).)
NF T71-200-1999 用碳氢化合物防止水污染的设备.泵系统.数据页.标准布局. (EQUIPMENT FOR PROTECTION AGAINST WATER POLLUTION BY HYDROCARBONS. PUMPING SYSTEMS. DATA SHEET. STANDARD LAY-OUT.)
NF T81-010-1976 液态化学产品的运输和装卸.内河航行罐船.产品的液压泵输送.安全装置 (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS. TANKERS FOR INLAND NAVIGATION. PUMP TRANSFER OF PRODUCTS. SAFETY DEVICE.)
NF U61-060-2003 液泵.安全要求.农业食品生产设备.保证使用卫生的设计原则 (Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use.)
NF X10-501-1976 真空技术.词汇.真空泵 (Vacuum technology. Vocabulary. Vacuum pumps.)
NF X10-507-1975 真空技术.喷雾离子泵.功能特性的测定 (VACUUM TECHNOLOGY - SPUTTER-ION PUMPS - MEASUREMENT OF PERFORMANCE CHARACTERISTICS)
NF X10-511-1971 真空技术.真空体积初压泵.体积流量的测定 (Vacuum technology-positive-displacement vacuum pumps-measurement ofthe volume rate of flow (pumping speed).)
NF X10-519-1975 真空技术.涡轮分子泵.功能特性的测定 (VACUUM TECHNOLOGY - METHODS OF MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF TURBO-MOLECULAR PUMPS)
NF X20-204-1974 气体分析.用配量活塞泵对气体混合物的动力制备进行校准的方法 (GAS ANALYSIS. METHOD FOR THE DYNAMIC PREPARATION OF GAS MIXTURES FOR CALIBRATION BY PROPORTIONING PISTON PUMPS.)
NF X42-130-1998 生物工程.泵的性能规范(欧洲标准EN 12462) (Biotechnology. Performance criteria for pumps.)
NF X43-245-1999 工作场所空气.体积流速大于51/min的化学试剂取样用泵.要求和试验方法 (Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods.)
NF X43-282-1997 工作场所空气.化学试剂专用抽样泵.要求和试验方法(欧洲标准EN 1232) (WORKPLACE ATMOSPHERES. PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AGENTS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1232).)
NF X50-001-5-4-1998 动力站设备的征购指南.第5-4部分:涡轮机.液压涡轮机.储存泵和泵涡轮机 (Guide for procurement of power station equipment. Part 5-4 : turbines. Hydraulic turbines, storage pumps and pump-turbines.)
NF X50-001-6-4-2000 动力站设备的征购指南.第6部分:涡轮附件.第4节:泵 (Guide for the procurement of power station equipement - Part 6 : turbine auxiliaries - Section 4 : pumps.)
编号中文名称英文名称

返回