| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ISO 10097-1-1999 | 金刚石绳索取心钻探设备 系列A 第1部分:米制单位 | Wireline diamond core drilling equipment - System A - Part 1: Metric units |
| ISO 10097-2-1999 | 金刚石绳索取心钻探设备 系列A 第2部分:英制单位 | Wireline diamond core drilling equipment - System A - Part 2: Inch units |
| ISO 10098-1992 | 金刚石绳索取心钻探设备 CSSK体系 | Wireline diamond core drilling equipment; system CSSK |
| ISO 10425-2003 | 石油和天然气工业用钢丝绳.最低要求和验收条件 | Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance |
| ISO 10955-1999 | 航空航天 航空器操纵钢丝绳用末端接头和松紧套筒 技术规范 | Aerospace - End-fittings and turnbarrels for aircraft control wire rope - Technical specification |
| ISO 11111-4-2005 | 纺织机械.安全要求.第4部分:纱线加工和绳索制造机械 | Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery |
| ISO 1140-2004 | 纤维绳索.聚酰胺绳索.3、4 和8股绞绳 | Fibre ropes - Polyamide - 3-, 4- and 8-strand ropes |
| ISO 1141-2004 | 纤维绳索.聚酯绳索.3、4 和8股绞绳 | Fibre ropes - Polyester - 3-, 4- and 8-strand ropes |
| ISO 1181-2004 | 纤维绳索.马尼拉麻和西沙尔麻绳索.3、4和8股绳 | Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes |
| ISO 12076-2002 | 钢丝绳.弹性的实际模量的测定 | Steel wire ropes - Determination of the actual modulus of elasticity |
| ISO 12401-2004 | 小艇.游艇用甲板安全带和保险绳.安全要求和试验方法 | Small craft - Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods |
| ISO 1346-2004 | 纤维绳索.聚丙烯裂膜、单丝和多丝(PP2)及聚丙烯高弹性多丝(PP3)绳索.3、4和8股绳索 | Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4- and 8-strand ropes |
| ISO 14573-2002 | 软靴用滑雪板绳带装配.要求和试验方法 | Snowboard strap bindings for soft boots - Requirements and test methods |
| ISO 15236-3-2007 | 钢丝绳输送带.第3部分:地下设备用输送带特殊安全要求 | Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations |
| ISO 16049-2-2005 | 航空货运设备.紧固带.第2部分:使用导则及绳套计算 | Air cargo equipment - Restraint straps - Part 2: Utilization guidelines and lashing calculations |
| ISO 16549-2004 | 纺织物.纤维绳的不均匀性.容量法 | Textiles - Unevenness of textile strands - Capacitance method |
| ISO 17558-2006 | 钢丝绳.套接法.熔融金属和树脂套接 | Steel wire ropes - Socketing procedures - Molten metal and resin socketing |
| ISO 17893-2004 | 钢丝绳.术语、标记和分类 | Steel wire ropes - Vocabulary, designation and classification |
| ISO 18692-2007 | 海上看守岗用纤维绳.聚酯 | Fibre ropes for offshore stationkeeping - Polyester |
| ISO 1968-2005 | 纤维绳索和绳索制品.词汇 | Fibre ropes and cordage - Vocabulary |
| ISO 1969-2004 | 纤维绳索.聚乙烯.3和4股绳索 | Fibre ropes - Polyethylene - 3- and 4-strand ropes |
| ISO 2020-1-1997 | 航空航天 航空器操纵系统用预成形柔性钢丝绳 第1部分:尺寸和负载能力 | Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 1: Dimensions and loads |
| ISO 2020-2-1997 | 航空航天 航空器操纵系统用预成形柔性钢丝绳 第2部分:技术规范 | Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 2: Technical specification |
| ISO 21669-2005 | 钢丝绳.转动特性的测定 | Steel wire ropes - Determination of rotational properties |
| ISO 2232-1990 | 一般用途非合金钢丝绳和粗直径钢丝绳用拉拨钢丝 规范 | Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes; specifications |
| ISO 2262-1984 | 一般用途钢丝绳套环 规范 | General purpose thimbles for use with steel wire ropes; Specification |
| ISO 22846-1-2003 | 个人防跌落保护性设备.绳索接近系统.第1部分:工作系统的基本原理 | Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work |
| ISO 2307-2005 | 纤维绳索.特定物理和机械性能的测定 | Fibre ropes - Determination of certain physical and mechanical properties |
| ISO 23733-2007 | 纺织品.绳绒线.测定线密度的试验方法 | Textiles - Chenille yarns - Test method for the determination of linear density |
| ISO 2408-2004 | 一般用途钢丝绳.最低要求 | Steel wire ropes for general purposes - Minimum requirements |
| ISO 2532-1974 | 钢丝绳 词汇 三种语言版 | Steel wire ropes; Vocabulary Trilingual edition |
| ISO 2701-1977 | 一般用途非合金钢丝绳用拉拨钢丝 验收条件 | Drawn wire for general purpose non-alloy steel wire ropes; Terms of acceptance |
| ISO 3108-1974 | 一般用途钢丝绳 实际断裂载荷的测定 | Steel wire ropes for general purposes; Determination of actual breaking load |
| ISO 3154-1988 | 矿井提升用的绞合钢丝绳 交货的技术要求 | Stranded wire ropes for mine hoisting; technical delivery requirements |
| ISO 3155-1976 | 矿井提升用的绞合钢丝绳 组成结构 特性和试验 | Stranded wire ropes for mine hoisting; Fibre components; Characteristics and tests |
| ISO 3156-1976 | 矿井提升用的绞合钢丝绳 防锈剂、润滑剂和维修保养 特性和试验 | Stranded wire ropes for mine hoisting; Impregnating compounds, lubricants and service dressings; Characteristics and tests |
| ISO 3189-1 Technical Corrigendum 1-2002 | 通用钢丝绳套.第1部分:一般特性和验收条件.技术勘误1 | Sockets for wire ropes for general purposes - Part 1: General characteristics and conditions of acceptance; Technical Corrigensdum 1 |
| ISO 3189-1-1985 | 普通钢丝绳用套管 第1部分:一般特性和验收条件 | Sockets for wire ropes for general purposes; Part 1 : General characteristics and conditions of acceptance |
| ISO 3189-2-1985 | 普通钢丝绳用套管 第2部分:锻造或机加工套管的特殊要求 | Sockets for wire ropes for general purposes; Part 2 : Special requirements for sockets produced by forging or machined from the solid |
| ISO 3189-3-1985 | 普通钢丝绳用套管 第3部分:锻造套管的特殊要求 | Sockets for wire ropes for general purposes; Part 3 : Special requirements for sockets produced by casting |
| ISO 3505-1975 | 绳索和绳索制品 系船用的天然纤维绳索和化学纤维绳索的等效性 | Ropes and cordage; Equivalence between natural fibre ropes and man-made fibre ropes for use in the mooring of vessels |
| ISO 3652-1975 | 造船 内河船舶 绳索卷车 | Shipbuilding; Inland vessels; Rope reels |
| ISO 4101-1983 | 电梯钢丝绳用拉拔钢丝 规范 | Drawn steel wire for elevator ropes; Specifications |
| ISO 4167-2006 | 聚烯烃农用细绳 | Polyolefin agricultural twines |
| ISO 4308-1-2003 | 起重机和提升设备.钢丝绳的选用.第1部分:总则 | Cranes and lifting appliances - Selection of wire ropes - Part 1: General |
| ISO 4308-2-1988 | 起重机和起重机械 钢丝绳的选择 第2部分:流动式起重机 利用系数 | Cranes and lifting appliances; selection of wire ropes; part 2: mobile cranes; coefficient of utilization |
| ISO 4309-2004 | 起重机.金属丝绳.保养、维修、安装、检查和报废 | Cranes - Wire ropes - Care, maintenance, installation, examination and discard |
| ISO 4344-2004 | 电梯用钢丝绳.最低要求 | Steel wire ropes for lifts - Minimum requirements |
| ISO 4345-1988 | 钢丝绳 纤维主芯 规范 | Steel wire ropes; fibre main cores; specification |
| ISO 4346-1977 | 一般用途钢丝绳 润滑剂 基本要求 | Steel wire ropes for general purposes; Lubricants; Basic requirements |
| ISO 5080-1994 | 农用西沙尔细绳 | Sisal agricultural twines |
| ISO 5422-1982 | 道路车辆 拖绳、拖缆或拖棒的固定 | Road vehicles; Anchorages for towing ropes, cables or bars |
| ISO 5614-1988 | 矿井提升用的锁定盘绕钢丝绳 交货的技术要求 | Locked coil wire ropes for mine hoisting; technical delivery requirements |
| ISO 6489-2-2002 | 农用车辆.机械连接装置间拖绳和牵引车辆.第2部分:40 U型钩规范 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 2: Specifications for clevis coupling 40 |
| ISO 6984-1990 | 矿山提升钢丝绳用非合金钢丝 规范 | Round non-alloy steel wires for stranded wire ropes for mine hoisting; specifications |
| ISO 7531-1987 | 一般用途钢丝绳吊索 特性和规范 | Wire rope slings for general purposes; Characteristics and specifications |
| ISO 7590-2009 | 钢丝绳输送带.总厚度及覆盖层厚度的测定方法 | Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness |
| ISO 7622-1-1984 | 钢丝绳芯输送带 纵向牵引力试验 第1部分:伸长率测量 | Steel cord conveyor belts; Longitudinal traction test; Part 1 : Measurement of elongation |
| ISO 7622-2-1984 | 钢丝绳芯输送带 纵向牵引力试验 第2部分:拉伸强度的测量 | Steel cord conveyor belts; Longitudinal traction test; Part 2 : Measurement of tensile strength |
| ISO 7623-1996 | 钢丝绳芯输送带 绳芯与涂层之间粘合力试验 原始试验和热处理 | Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment |
| ISO 8094-1984 | 钢丝绳芯输送带 绳芯与涂层间粘合强度试验 | Steel cord conveyor belts; Adhesion strength test of the cover to the core layer |
| ISO 8792-1986 | 钢丝绳吊具 采用的安全规范和检验规程 | Wire rope slings; Safety criteria and inspection procedures for use |
| ISO 8793-1986 | 钢丝绳 套圈卡紧环眼接头 | Steel wire ropes; Ferrule-secured eye terminations |
| ISO 8794-1986 | 钢丝绳 吊索用铰接索眼 | Steel wire ropes; Spliced eye terminations for slings |
| ISO 9554-2005 | 纤维绳索.一般规范 | Fibre ropes - General specifications |
| ISO 9736-2000 | 航空航天 航空器操纵钢丝绳的螺纹式钢制有眼端 尺寸及载荷 | Aerospace - Eye-ends, in steel, threaded, for aircraft control wire rope - Dimensions and loads |
| ISO 9737-2000 | 航空航天 航空器操纵钢丝绳用锻制耐腐蚀钢有眼端 尺寸及载荷 | Aerospace - Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9738-2000 | 航空航天 航空器操纵钢丝绳的旋转套筒 尺寸及载荷 | Aerospace - Turnbarrels, for aircraft control wire rope - Dimensions and loads |
| ISO 9747-2000 | 航空航天 航空器操纵钢丝绳上的锻制耐腐蚀钢双柄球端 尺寸及载荷 | Aerospace - Double-shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9748-2000 | 航空航天 航空器操纵钢丝绳上的锻制耐腐蚀钢球端 尺寸及载荷 | Aerospace - Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9749-2000 | 航空航天 航空器操纵钢丝绳上的锻制耐腐蚀柱螺栓端 尺寸及载荷 | Aerospace - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9757-2000 | 航空航天 航空器操纵钢丝绳旋转套筒用螺纹式钢制叉形端 尺寸及载荷 | Aerospace - Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels - Dimensions and loads |
| ISO 9758-2000 | 航空航天 航空器操纵钢丝绳用滚动轴承用螺纹式钢制叉形端 尺寸及载荷 | Aerospace - Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads |
| ISO 9759-2000 | 航空航天 航空器操纵钢丝绳上的锻制耐腐蚀钢叉形端 尺寸及载荷 | Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9760-2000 | 航空航天 航空器滚动轴承操纵钢丝绳上的锻制耐腐蚀钢制叉形端 尺寸及载荷 | Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads |
| ISO 9761-2000 | 航空航天 航空器操纵钢丝绳旋转套筒用耐腐蚀钢制锁定夹 尺寸 | Aerospace - Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles - Dimensions |
| ISO 9762-2000 | 航空航天 航空器操纵钢丝绳组件 尺寸及端部配件组合 | Aerospace - Aircraft control wire rope assemblies - Dimensions and end-fitting combinations |
| ISO 9763-1999 | 航空航天 航空器操纵钢丝绳组件 技术规范 | Aerospace - Aircraft control wire rope assemblies - Technical specification |
| ISO 9902-4-2001 | 纺织机械 噪声检测规则 第4部分：纱线处理、缆索和绳索制造机械 | Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery |
| ISO 9975-1990 | 封闭缠绕矿用非合金钢丝绳 规范 | Round non-alloy steel wires for locked coil mine winding ropes; specifications |
| ISO/TR 4558-1985 | 小艇 不锈钢丝绳用索具螺旋扣、叉头、连接销和眼孔的主要尺寸 | Small craft; Rigging screws for stainless steel wire rope; Principal dimensions for forks, connection pins and eye-holes |
| ISO/TR 9209-1989 | 明渠水流测量 湿绳改正的确定 | Measurement of liquid flow in open channels; determination of the wetline correction |
| 编号 | 中文名称 | 英文名称 |