编号 | 中文名称 | 英文名称 |
ANSI ATIS0300074-2006
| 安全管理系统的要求和指南
| Guidelines and Requirements for Security Management Systems
|
ANSI B11.19-2003
| 被其他B11机床安全标准参考时安全保护的设计、制造、保养和操作的性能标准
| Performance Criteria for the Design, Construction, Care, and Operation of Safeguarding When Referenced by the Other B11 Machine Tool Safety Standards
|
ANSI B28.1-2000
| 橡胶工业中磨床和砑光机的安全规范
| Safety Specifications for Mills and Calenders in the Rubber Industry
|
ANSI B65.1-2005
| 图象技术.安全标准.印刷机系统
| Graphic technology - Safety standard - Printing press systems
|
ANSI B65.3-2001
| 安全标准.切纸机、平整机和整体加工设备
| Safety standard - Guillotine paper cutters, mill trimmers and integral handling equipment
|
ANSI B65.4-2002
| 安全标准.包括旋转的三刀切剪机和单-多刀切剪机
| Safety standard - Three-knife trimmers, including rotary, and single- and multiple-knife trimmers
|
ANSI B65.5-2006
| 独立操作的滚压机安全标准
| Safety Standard - Stand-Alone Platen Presses
|
ANSI B71.3-2005
| 室外动力设备.扫雪机.安全规范
| Outdoor Power Equipment - Snow Throwers - Safety Specifications
|
ANSI C18.1M Part 2-2003
| 有水溶电解质的便携式原电池和蓄电池组.安全标准
| Portable Primary Cells and Batteries with Aqueous Electrolyte - Safety Standard
|
ANSI C18.2M Part 2-2007
| 便携式可再充电电池.安全标准
| Portable Rechargeble Cells and Batteries - Safety Standard
|
ANSI C18.3M Part 2-2004
| 便携式锂原电池和蓄电池.安全标准
| Portable Lithium Primary Cells and Batteries - Safety Standard
|
ANSI C78.60432.1-2003
| 白炽灯.安全规范.第I部分:家用和类似一般照明用钨丝灯
| Incandescent Lamps - Safety Specifications - Part I: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes
|
ANSI C78.60432.2-2004
| 电灯.白炽灯.安全规范.家用和类似一般照明用钨卤灯.第2部分
| Electric Lamps - Incandescent Lamps - Safety Specifications - Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes - Part 2
|
ANSI MH24.1-2005
| 水平旋转式物料搬运和相关设备的安全标准
| Safety Standard for Horizontal Carousel Material Handling and Associated Equipment
|
ANSI N42.35-2006
| 国家安全防护用放射检测门监视器的评价和性能
| Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
|
ANSI NAPIM177.2-2006
| 安全标准.印刷油墨竖柱混合器
| Safety standard - Printing ink vertical post mixers
|
ANSI S2.60-1987
| 平衡机.外壳和其他安全措施
| Balancing machines - Enclosures and other safety measures
|
ANSI X9.49-1998
| 金融业金融服务的安全防护远程监测
| Secure Remote Access to Financial Services for the Financial Industry
|
ANSI Z26.1-1996
| 公路行驶汽车的车窗和汽车设备用安全玻璃材料安全规程的美国国家标准
| American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways Safety Code
|
ANSI/AIHA Z10-2005
| 职业卫生和安全管理系统
| Occupational Health and Safety Management Systems
|
ANSI/ASAE S525-1.2-2003
| 农机驾驶室.环境空气质量.定义、试验方法和安全规程
| Agricultural Cabs - Environmental Air Quality - Definitions, Test Methods, and Safety Practices
|
ANSI/ASHRAE 15-2001
| 机械制冷安全规程
| Safety Code for Mechanical Refrigeration
|
ANSI/ASHRAE 15a-2007
| 制冷系统安全标准
| Safety Standard for Refrigeration Systems
|
ANSI/ASHRAE 15b-2006
| 制冷系统安全标准
| Safety Standard for Refrigeration Systems
|
ANSI/ASHRAE 15c-2007
| 制冷系统安全标准
| Safety Standard for Refrigeration Systems
|
ANSI/ASME A18.1-2005
| 平台式升降机和扶梯式升降椅的安全标准
| Safety Standard for Platform Lifts and Stairway Chairlifts
|
ANSI/ASME A90.1-2003
| 带式载人升降机的安全标准
| Safety Standard for Belt Manlifts
|
ANSI/ASME B15.1-2000
| 机械动力传动设备的安全标准
| Safety Standard for Mechanical Power Transmission Apparatus
|
ANSI/ASME B19.1-1995
| 空气压缩机系统的安全标准
| Safety Standard for Air Compressor Systems
|
ANSI/ASME B19.3-1991
| 加工工业用压缩机的安全标准
| Safety Standard for Compressors for Process Industries
|
ANSI/ASME B19.3a-1994
| 加工工业压缩机安全标准
| Safety Standard for Compressors for Process Industries
|
ANSI/ASME B19.3b-1995
| 加工工业压缩机安全标准
| Safety Standard for Compressors for Process Industries
|
ANSI/ASME B20.1-2006
| 输送机及其相关设备的安全标准
| Safety Standard for Conveyors and Related Equipment
|
ANSI/ASME B30.14-2004
| 侧臂式拖拉机的安全标准
| Safety Standard for Side Boom Tractors
|
ANSI/ASME B30.26-2004
| 索具五金件的安全标准
| Safety Standard for Rigging Hardware
|
ANSI/ASME PVHO-1-2007
| 人占用的压力容器的安全标准
| Safety Standard for Pressure Vessels for Human Occupancy
|
ANSI/ASTM E1497-2005
| 可混合水的金属加工流体使用安全规程
| Practice for Safe Use of Water-Miscible Metal Removal Fluids
|
ANSI/ASTM F1250-2000
| 固定练习式自行车消费者安全规范
| Consumer Safety Specification for Stationary Exercise Bicycles
|
ANSI/ASTM F1352-1991
| 固定的冰刀端部的性能和安全标准指南
| Guide for Fixed Blade Broadhead Performance and Safety Standards
|
ANSI/ASTM F1446-2006
| 评定安全防护帽功能特性用设备和程序的测试方法
| Test Methods for Equipment, and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
|
ANSI/ASTM F381-2006
| 消费者蹦床的部件、组装、使用和标签用安全规范
| Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
|
ANSI/ASTM F400-2004
| 打火机用户安全规范
| Consumer Safety Specification for Lighters (15.07)
|
ANSI/ASTM F513-2000
| 曲棍球运动员面罩安全规范
| Safety Specification for Eye and Face Protective Equipment for Hockey Players
|
ANSI/ASTM F963-2007
| 玩具安全的消费者安全规范
| Consumer Safety Specification on Toy Safety
|
ANSI/AWS D16.1M/D 16-2004
| 机器人电弧焊接安全规范
| Specification for Robotic Arc Welding Safety
|
ANSI/AWS F4.1-2007
| 容器和管道焊接和切割准备的推荐安全规程
| Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping
|
ANSI/EIA 636-1996
| 推荐的扬声器安全规程
| Recommended Loudspeaker Safety Practices
|
ANSI/ICC 2.0-1998
| 人造住宅建设和安全标准
| Manufactured Housing Construction and Safety Standards
|
ANSI/IEC C78.1195-2001
| 双管荧光灯.安全规范
| Double-Capped Fluorescent Lamps - Safety Specifications
|
ANSI/IEC C78.1199-2001
| 单端荧光灯.安全规范
| Single-Capped Fluorescent Lamps - Safety Specifications
|
ANSI/IEC C78.62035-2004
| 放电灯(不包括荧光灯).安全规范
| Discharge Lamps (excluding fluorescent lamps) - Safety Specifications
|
ANSI/IEEE 338-2007
| 核电站安全系统周期监督测试标准
| Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
|
ANSI/IEEE 352-1994
| 核电站安全系统可靠性分析一般原则指南
| Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems
|
ANSI/IEEE 379-2000
| 核电站安全系统中单一故障标准的应用
| Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems
|
ANSI/IEEE 463-2006
| 电解电池线性工作区的电气安全规程标准
| Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
|
ANSI/IEEE 577-2004
| 核电站安全系统的设计及运行中的可靠性分析要求
| Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations, Requirements for
|
ANSI/IEEE 692-1997
| 核动力发电站安全系统的标准准则
| Standard Criteria for Security Systems for Nuclear Power Generating Stations
|
ANSI/IEEE 7-4.3.2-2003
| 核电站安全系统中数字计算机标准
| Criteria for Digital Computers in Safety Systems of Nuclear Power Generating Stations
|
ANSI/INCITS/ISO/IEC 10118-1-2000
| 信息技术.安全技术.散列函数.第1部分:总则
| Information Technology - Security Techniques - Hash Functions - Part 1: General
|
ANSI/INCITS/ISO/IEC 10118-2-2000
| 信息技术.安全技术.散列函数.第2部分:使用n位分组密码的散列函数
| Information Technology - Security Techniques - Hash-Functions - Part 2: Hash-Functions Using an n-Bit Block Cipher
|
ANSI/INCITS/ISO/IEC 11770-2-1996
| 信息技术.安全技术.密钥管理.第2部分:使用对称技术的机制
| Information Technology - Security Techniques - Key Management - Part 2: Mechanisms Using Symmetric Techniques
|
ANSI/INCITS/ISO/IEC 11770-3-1999
| 信息技术.安全技术.密钥管理.第3部分:使用非对称技术的机制
| Information Technology - Security Techniques - Key Management - Part 3: Mechanisms Using Asymmetric Techniques
|
ANSI/INCITS/ISO/IEC 13335-1-2004
| 信息技术.安全技术.信息和通信技术安全的管理.第1部分:信息和通信技术安全管理用概念和模型
| Information technology - Security techniques - Management of information and communications technology security - Part 1: Concepts and models for information and communications technology security management
|
ANSI/INCITS/ISO/IEC 13335-1-2004
| 信息技术.安全技术.信息和通信技术安全的管理.第1部分:信息和通信技术安全管理用概念和模型
| Information technology - Security techniques - Management of information and communications technology security - Part 1: Concepts and models for information and communications technology security management
|
ANSI/INCITS/ISO/IEC 13888-1-2004
| 信息技术.安全技术.抗抵赖.第1部分:概述
| Information technology - Security techniques - Non-repudiation - Part 1: General
|
ANSI/INCITS/ISO/IEC 14888-1-1998
| 信息技术.安全技术.带附录的数字签名.第1部分:总则
| Information Technology - Security techniques - Digital signatures with appendix - Part 1: General
|
ANSI/INCITS/ISO/IEC 14888-3-1998
| 信息技术.安全技术.带附录的数字签名.第3部分:以证书为基础的机制
| Information Technology - Security techniques - Digital signatures with appendix - Part 3: Certificate-based mechanisms
|
ANSI/INCITS/ISO/IEC 15408-1-1999
| 信息技术.安全技术.IT安全的评价准则.第1部分:引言和一般模型
| Information Technology - Security techniques - Evaluation criteria for IT security - Part 1: Introduction and general model
|
ANSI/INCITS/ISO/IEC 15408-2-1999
| 信息技术.安全技术.IT安全的评价准则.第2部分:安全功能要求
| Information Technology - Security techniques - Evaluation criteria for IT security - Part 2: Security functional requirements
|
ANSI/INCITS/ISO/IEC 15408-3-1999
| 信息技术.安全技术.IT安全的评价准则.第3部分:安全保证要求
| Information Technology - Security Techniques - Evaluation Criteria for IT Security - Part 3: Security Assurance Requirements
|
ANSI/INCITS/ISO/IEC 15816-2002
| 信息技术.安全技术.存取控制保密信息对象
| Information Technology - Security Techniques - Security Information Objects For Access Control
|
ANSI/INCITS/ISO/IEC 17799-2005
| 信息技术.安全技术.信息安全管理实施规范
| Information technology - Security techniques - Code of practice for information security management
|
ANSI/INCITS/ISO/IEC 17799-2005
| 信息技术.安全技术.信息安全管理实施规范
| Information technology - Security techniques - Code of practice for information security management
|
ANSI/INCITS/ISO/IEC 18014-3-2004
| 信息技术.安全技术.时间标记业务.第3部分:产生链接标记的机制
| Information technology - Security techniques - Time-stamping services - Part 3: Mechanisms producing linked tokens
|
ANSI/INCITS/ISO/IEC 18028-4-2005
| 信息技术.安全技术.IT网络安全.第4部分:远程访问安全
| Information technology - Security techniques - IT network security - Part 4: Securing remote access
|
ANSI/INCITS/ISO/IEC 18032-2005
| 信息技术.安全技术.素数生成
| Information technology - Security techniques - Prime number generation
|
ANSI/INCITS/ISO/IEC 18033-1-2005
| 信息技术.安全技术.加密算法.第1部分:总则
| Information technology - Security techniques - Encryption algorithms - Part 1: General
|
ANSI/INCITS/ISO/IEC 18033-3-2005
| 信息技术.安全技术.加密算法.第3部分:分组密码
| Information technology - Security techniques - Encryption algorithms - Part 3: Block ciphers
|
ANSI/INCITS/ISO/IEC 18033-4-2005
| 信息技术.安全技术.加密算法.第4部分:序列密码
| Information technology - Securit techniques - Encryption algorithms - Part 4: Stream ciphers
|
ANSI/INCITS/ISO/IEC 27001-2005
| 信息技术.安全技术.信息安全管理系统.要求
| Information technology - Security techniques - Information security management systems - Requirements
|
ANSI/INCITS/ISO/IEC 27001-2005
| 信息技术.安全技术.信息安全管理系统.要求
| Information technology - Security techniques - Information security management systems - Requirements
|
ANSI/INCITS/ISO/IEC 9796-3-2000
| 信息技术.安全技术.带消息恢复功能的数字签名方案.第3部分:基于离散对数机制
| Information Technology - Security Techniques - Digital Signature Schemes Giving Message Recovery - Part 3: Discrete Logarithm Based Mechanisms
|
ANSI/INCITS/ISO/IEC 9797-1-1999
| 信息技术.安全技术.电文鉴别代码(MACS).第1部分:用块密码的机制
| Information Technology - Security techniques - Message Authentication Codes (MACs) - Part 1: Mechanisms using a block cipher
|
ANSI/INCITS/ISO/IEC 9797-2-2002
| 信息技术.安全技术.电文鉴别代码(MACS).第2部分:专用散列函数的作用原理
| Information technology - Security techniques - Message Authentication Codes (MACs) - Part 2: Mechanisms using a dedicated hash-function
|
ANSI/INCITS/ISO/IEC 9798-2-1999
| 信息技术.安全技术.实体鉴别.第2部分:使用对称加密算法的机制
| Information Technology - Security techniques - Entity authentication - Part 2: Mechanisms using symmetric encipherment algorithms
|
ANSI/INCITS/ISO/IEC 9798-4-1999
| 信息技术.安全技术.实体鉴别.第4部分:使用密码校验函数的机制
| Information Technology - Security techniques - Entity authentication - Part 4: Mechanisms using a cryptographic check function
|
ANSI/INCITS/ISO/IEC 9798-5-2004
| 信息技术.安全技术.实体鉴别.第5部分:使用零知识技术的机制
| Information technology - Security techniques - Entity authentication - Part 5: Mechanisms using zero-knowledge techniques
|
ANSI/INCITS/ISO/IEC TR13335-1-1996
| 信息技术.IT安全管理指南.第1部分:IT安全的概念和模型
| Information Technology - Guidelines for the Management of IT Security - Part 1: Concepts and Models for IT Security
|
ANSI/INCITS/ISO/IEC TR13335-3-1998
| 信息技术.IT安全管理指南.第3部分:IT安全的管理技术
| Information Technology - Guidelines for the Management of IT Security - Part 3: Techniques for the Management of IT Security
|
ANSI/INCITS/ISO/IEC TR13335-4-2000
| 信息技术.IT安全管理指南.第4部分:安全防卫的选择
| Information Technology - Guidelines for the Management of IT Security - Part 4: Selection of Safeguards
|
ANSI/INCITS/ISO/IEC TR13335-5-2001
| 信息技术.信息安全管理指南.第5部分:网络安全管理指南
| Information Technology - Guidelines for the Management of IT Security - Part 5: Management Guidance on Network Security
|
ANSI/ISO/IEC 10118-2-2000
| 信息技术.安全技术.散列函数.第2部分:使用n位分组密码的散列函数
| Information Technology - Security Techniques - Hash-Functions - Part 2: Hash-Functions Using an n-Bit Block Cipher
|
ANSI/ITSDF B56.10-2006
| 人工操作高提升工业用货车的安全标准
| Manually Propelled High Lift Industrial Trucks, Safety Standard for
|
ANSI/ITSDF B56.5-2005
| 工业轨道式车辆和载人工业车辆自动化功能的安全标准
| Safety Standard for Guided Industrial Vehicles and Automated Functions of Manned Industrial Vehicles
|
ANSI/ITSDF B56.8-2006
| 人员和物料装载车的安全标准
| Safety Standard for Personnel and Burden Carriers
|
ANSI/ITSDF B56.9-2007
| 操作者控制的工业牵引车的安全标准
| Safety Standard for Operator Controlled Industrial Tow Tractors
|
ANSI/NFPA 150-2007
| 畜舍设备的消防和人身安全标准
| Standard on Fire and Life Safety in Animal Housing Facilities
|
ANSI/NFPA 1982-2006
| 个人警报安全系统(PASS)标准
| Standard on Personal Alert Safety Systems (PASS)
|
ANSI/NFPA 241-2004
| 建筑物改建及拆除的安全防护
| Safeguarding Construction, Alteration, and Demolition Operations
|
ANSI/NFPA 301-2008
| 从着火商船逃生的安全规程
| Code for Safety to Life from Fire on Merchant Vessels
|
ANSI/NFPA 5000-2006
| 房屋建筑和安全规范T
| Building Construction and Safety CodeT
|
ANSI/NFPA 804-2006
| 先进的轻水反应堆发电站的防火安全标准
| Standard for Fire Protection for Advanced Light Water Reactor Electric Generating Plants
|
ANSI/OPEI B71.1-2003
| 消费者草皮维护设备.手扶式剪草机和座骑式剪草机.安全规范
| Consumer Turf Care Equipment - Walk-Behind Mowers and Ride-On Machines with Mowers - Safety Specifications
|
ANSI/OPEI B71.4-1990
| 商业草皮保养设备.安全规范
| Commercial Turf Care Equipment - Safety Specifications
|
ANSI/OPEI B71.6-2000
| 电动食品磨碎机/研磨机和食品磨碎机/装袋机的安全规范
| Powered Shredder/Grinders and Shredder/Baggers, Safety Specifications
|
ANSI/OPEI B71.8-1996
| 户外电动设备.后行式动力旋耕机和手持耕耘机.安全规范
| Outdoor Power Equipment - Walk-Behind Powered Rotary Tillers and Hand Supported Cultivators - Safety Specifications
|
ANSI/SCTE 24-10-2006
| 个人间有线通信.第10部分:安全规范
| IPCablecom Part 10: Security Specification
|
ANSI/UL 1008-2007
| 转换开关设备的安全标准(照明和电力用闲置的自动、手动和旁路/隔离转换开关)
| Standard for Safety for Transfer Switch Equipment (Automatic, manual, and by-pass/isolation transfer switches for use in ordinary locations to provide for lighting and power)
|
ANSI/UL 1026-2006
| 家用电子灶具和食品加工器具的安全标准
| Standard for Safety for Electric Household Cooking and Food Serving Appliances
|
ANSI/UL 103-2006
| 工厂制住宅型烟囱和建筑物供暖设备的安全标准
| Standard for Safety for Factory-Built Chimneys for Residential Type and Building Heating Appliances
|
ANSI/UL 1063-2006
| 机床线缆用安全标准
| Standard for Safety for Machine-Tool Wires and Cables
|
ANSI/UL 1072-2007
| 中压电力电缆的安全标准
| Standard for Safety for Medium-Voltage Power Cables (Proposal dated February 24, 2006)
|
ANSI/UL 1077-2006
| 电气设备用辅助保护器用安全标准
| Standard for Safety for Supplementary Protectors for Use in Electrical Equipment
|
ANSI/UL 1082-2005
| 家用电咖啡壶和煮泡类器具的安全标准(提议日期4-15-05)
| Standard for Safety for Household Electric Coffee Makers and Brewing-Type Appliances (proposal dated 4-15-05)
|
ANSI/UL 1086-2007
| 家用垃圾压实器的安全标准
| Standard for Safety for Household Trash Compactors
|
ANSI/UL 1088-2005
| 临时照明线的安全标准
| Standard for Safety for Temporary Lighting Strings
|
ANSI/UL 109-2004
| 易燃和可燃液体、制冷辅助设备和船上用管件的安全标准
| Standard for Safety for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
|
ANSI/UL 10B-2001
| 门附件的燃烧试验的安全标准
| Standard for Safety for Fire Tests of Door Assemblies
|
ANSI/UL 10C-2001
| 门附件的正压燃烧试验的安全标准
| Standard for Safety for Positive Pressure Fire Tests of Door Assemblies
|
ANSI/UL 1123-2007
| 海上漂浮装置的安全标准
| Standard for Safety for Marine Buoyant Devices
|
ANSI/UL 1177-2007
| 救生衣的安全标准
| The Standard for Safety for Buoyant Vests
|
ANSI/UL 1180-2007
| 充足气的娱乐型个人浮水装置的安全标准
| Standard for Safety for Fully Inflatable Recreational Personal Flotation Devices
|
ANSI/UL 1191-2007
| 个人浮水装置部件的安全标准
| Standard for Safety for Components for Personal Flotation Devices
|
ANSI/UL 1203-2006
| 危险(分类的)场所用防爆和防燃尘电气设备的安全标准
| Standard for Safety for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
|
ANSI/UL 1236-2006
| 装载发电机启动器蓄电池用蓄电池充电器的安全标准
| Standard for Safety for Battery Chargers for Charging Engine-Starter Batteries
|
ANSI/UL 1240-2005
| 商用电子干衣设备的安全标准
| Standard for Safety for Electric Commercial Clothes-Drying Equipment
|
ANSI/UL 1247-2007
| 离心消防泵驱动用柴油发动机的安全标准
| Standard for Safety for Diesel Engines for Driving Centrifugal Fire Pumps
|
ANSI/UL 125-2001
| 无水氨和液化气阀门的安全标准(安全阀除外)
| Standard for Safety for Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)
|
ANSI/UL 1254-2005
| 预先设计的干式化学灭火系统装置的安全标准
| Standard for Safety for Pre-Engineered Dry Chemical Extinguishing System Units
|
ANSI/UL 127-1998
| 工厂生产壁炉的安全标准
| Standard for Safety for Factory-Built Fireplaces
|
ANSI/UL 1275-2006
| 易燃液体储存室的安全标准
| Standard for Safety for Flammable Liquid Storage Cabinets
|
ANSI/UL 1277-2005
| 任选光纤构件的电力电缆和控制盘电缆的安全标准(第4版)
| Standard for Safety for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (4th edition)
|
ANSI/UL 13-2007
| 有功率限制的电路电缆安全标准
| Standard for Safety for Power-Limited Circuit Cables
|
ANSI/UL 1315-2003
| 金属制废纸容器安全标准
| Standard for Safety for Metal Waste Paper Containers
|
ANSI/UL 132-2002
| 无水氨气和液化石油气的安全阀的安全标准
| Standard for Safety for Safety Relief Valves for Anhydrous Ammonia and LP-Gas
|
ANSI/UL 1332-2005
| 室外电气设备钢外壳用有机覆层安全标准
| Standard for Safety for Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment
|
ANSI/UL 1419-2005
| 专业视听设备的安全标准
| Standard for Safety for Professional Video and Audio Equipment
|
ANSI/UL 142-2006
| 可燃和易燃液体用地上钢贮罐的安全标准
| Standard for Safety for Steel Aboveground Tanks for Flammable and Combustible Liquids
|
ANSI/UL 1424-2005
| 有限功率火灾报警线路用电缆的安全标准
| Standard for Safety for Cables for Power-Limited Fire-Alarm Circuits
|
ANSI/UL 1425-2006
| 非动力限制火灾报警电路安全标准
| Standard for Safety for Non-Power-Limited Fire-Alarm Circuits
|
ANSI/UL 144-2001
| 液化石油气压力调节阀的安全标准
| Standard for Safety for Pressure-Regulating Valves for LP Gas
|
ANSI/UL 1446-2006
| 绝缘材料的系统用安全标准.一般要求
| Standard for Safety for Systems of Insulating Materials - General
|
ANSI/UL 1447-2006
| 电动剪草机的安全标准
| The Standard for Safety for Electric Lawn Mowers
|
ANSI/UL 1449-2006
| 电泳保护装置安全标准
| Standard for Safety for Surge Protective Devices
|
ANSI/UL 1472-2006
| 固态微光控制器安全标准
| Standard for Safety for Solid-State Dimming Controls
|
ANSI/UL 1482-1998
| 固体燃料型房间加热器用安全标准
| Standard for Safety for Solid-Fuel Type Room Heaters
|
ANSI/UL 1486-2003
| 防火设施用干管阀快速打开装置的安全标准
| Standard for Safety for Quick Opening Devices for Dry Pipe Valves for Fire Protection Service
|
ANSI/UL 153-2005
| 便携式电灯安全标准
| Standard for Safety for Portable Electric Luminaires
|
ANSI/UL 154CAN/ULC-S 503-2007
| 二氧化碳灭火器的安全标准
| Standard for Safety for Carbon-Dioxide Fire Extinguishers
|
ANSI/UL 1559-2007
| 触电致死型昆虫控制设备的安全标准
| Standard for Safety for Insect-Control Equipment-Electrocution Type (Bulletin dated October 31, 2003)
|
ANSI/UL 1564-2006
| 工业蓄电池充电装置安全标准
| Standard for Safety for Industrial Battery Chargers
|
ANSI/UL 1581-2006
| 安全标准.电线、电缆和软线的基准标准
| Standard for Safety - Reference Standard for Electrical Wires, Cables, and Flexible Cords
|
ANSI/UL 1585-2006
| 2级和3级变压器的安全标准
| Standard for Safety for Class 2 and Class 3 Transformers
|
ANSI/UL 1598-2004
| 灯具的安全标准
| Standard for Safety for Luminaires
|
ANSI/UL 1598A-2005
| 海船装置用灯具的安全标准
| Standard for Safety for Luminaires for Installation on Marine Vessels
|
ANSI/UL 1626-2003
| 民用防火喷水器安全标准
| Standard for Safety for Residential Sprinklers for Fire-Protection Service
|
ANSI/UL 1651-2003
| 光缆安全标准
| Standard for Safety for Optical Fiber Cable
|
ANSI/UL 1655-2004
| 社区天线电视电缆用安全标准
| Standard for Safety for Community-Antenna Television Cables
|
ANSI/UL 1659-2005
| 软线组和电源软线用固定插头开关的安全标准
| Standard for Safety for Attachment Plug Blades for Use in Cord Sets and Power Supply Cords
|
ANSI/UL 1660-2004
| 不透液体的非金属软管的安全标准
| Standard for Safety for Liquid-Tight Flexible Nonmetallic Conduit
|
ANSI/UL 1678-2003
| 与音频/视频设备一起使用的家用、商用和专用拖车和支架的安全标准
| Standard for Safety for Household, Commercial, and Professional-Use Carts and Stands for Use with Audio/Video Equipment
|
ANSI/UL 1682-2007
| 针型和套管型插头、插孔和电缆连接器的安全标准
| Standard for Safety for Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type
|
ANSI/UL 1686-2007
| 引线和套管配置的安全标准(推荐日期 2006-10-20)
| Standard for Safety for Pin and Sleeve Configurations (Proposal dated October 20, 2006)
|
ANSI/UL 1690-2006
| 数据处理电缆安全标准
| Standard for Safety for Data-Processing Cable
|
ANSI/UL 1692-2004
| 聚合材料的安全标准.线圈型
| Standard for Safety for Polymeric Materials - Coil Forms
|
ANSI/UL 1693-1998
| 电辐射加热板和加热板组安全标准
| Standard for Safety for Electric Radiant Heating Panels and Heating Panel Sets
|
ANSI/UL 1694-2005
| 小型聚合物复合材料易燃性试验的安全标准
| Standard for Safety for Tests for Flammability of Small Polymeric Component Materials
|
ANSI/UL 1696-2005
| 非金属机械防护管(NMPT)的安全标准
| Standard for Safety for the Standard for Nonmetallic Mechanical Protection Tubing (NMPT)
|
ANSI/UL 1699-2007
| 电弧故障电路断流器用安全标准
| Standard for Safety for Arc-Fault Circuit-Interrupters (Bulletin dated December 16, 2005)
|
ANSI/UL 1703-2004
| 片状光电模块和配电盘的安全标准
| Standard for Safety for Flat-Plate Photovoltaic Modules and Panels
|
ANSI/UL 1715-2003
| 内部涂层材料燃烧试验的安全标准
| Standard for Safety for Fire Test of Interior Finish Material
|
ANSI/UL 174-2005
| 家用蓄水式电水加热器的安全标准
| Standard for Safety for Household Electric Storage Tank Water Heaters (dated 8/26/05)
|
ANSI/UL 1740-2007
| 机器人和自动化设备的安全标准
| Standard for Safety Robots and Robotic Equipment
|
ANSI/UL 1746-2007
| 钢制地下储油罐外部防腐蚀系统的安全标准(UL 1746)
| Standard for Safety for External Corrosion Protection Systems for Steel Underground Storage Tanks, UL 1746
|
ANSI/UL 1767-2005
| 早抑制快速反应型消防喷水器的安全标准
| Standard for Safety for Early-Suppression Fast-Response Sprinklers
|
ANSI/UL 1776-2005
| 高压清洗机的安全标准
| Standard for Safety for High-Pressure Cleaning Machines
|
ANSI/UL 1778-2005
| 连续电源设备的安全标准
| Standard for Safety for Uninterruptible Power Systems
|
ANSI/UL 1784-2004
| 门组件空气渗漏试验的安全标准
| Standard for Safety for Air Leakage Tests for Door Assemblies
|
ANSI/UL 1786-2005
| 直接插入式夜间照明灯具的安全标准
| Standard for Safety for Direct Plug-In Nightlights
|
ANSI/UL 180-1997
| 燃油炉燃料用液位指示规的安全标准
| Standard for Safety for Liquid-Level Indicating Gauges for Oil Burner Fuels (Bulletin dated January 5, 2007)
|
ANSI/UL 181-2005
| 厂制风管和风管接头的安全标准
| The Standard for Safety for Factory-Made Air Ducts and Air Connectors
|
ANSI/UL 181A-2005
| 与刚性风管一起使用的密闭系统的安全标准
| Standard for Safety for Closure Systems for Use With Rigid Air Ducts
|
ANSI/UL 181B-2005
| 与柔性风管和风管接头一起使用的密闭系统的安全标准
| Standard for Safety for Closure Systems for Use With Flexible Air Ducts and Air Connectors
|
ANSI/UL 183-2007
| 制造布线系统的安全标准
| Standard for Safety for Manufactured Wiring Systems (Proposal dated 2-16-07)
|
ANSI/UL 1838-2007
| 低压风景照明系统的安全标准
| Standard for Safety for Low Voltage Landscape Lighting Systems
|
ANSI/UL 1839-2007
| 汽车蓄电池电瓶线的安全标准
| Standard for Safety for Automotive Battery Booster Cables
|
ANSI/UL 1889-2004
| 烹调油用商用过滤器安全标准
| Standard for Safety for Commercial Filters for Cooking Oil
|
ANSI/UL 1897-2004
| 屋顶层覆盖系统抬起试验的安全标准
| Standard for Safety for Uplift Tests For Roof Covering Systems
|
ANSI/UL 1917-2002
| 固态风机速度控制器的安全标准
| Standard for Safety for Solid-State Fan Speed Controls
|
ANSI/UL 1951-2003
| 电动管附件安全标准
| Standard for Safety for Electric Plumbing Accessories
|
ANSI/UL 1963-2005
| 制冷剂回收/再循环设备安全标准
| Standard for Safety for Refrigerant Recovery/Recycling Equipment
|
ANSI/UL 1978-2005
| 润滑脂管道的安全标准
| Standard for Safety for Grease Ducts
|
ANSI/UL 198M-2003
| 矿山用熔断器的安全标准
| Standard for Safety for Mine-Duty Fuses
|
ANSI/UL 1990-2007
| 带导线的非金属地下导管的安全标准
| Standard for Safety for Nonmetallic Underground Conduit with Conductors
|
ANSI/UL 1996-2006
| 电气管道加热器的安全标准
| Standard for Safety for Electric Duct Heaters
|
ANSI/UL 1998-1999
| 可编程元件中软件的安全标准
| Standard for Safety for Software in Programmable Components
|
ANSI/UL 201-2006
| 车库设备的安全标准
| Standard for Safety for Garage Equipment
|
ANSI/UL 203-2005
| 消防用管子悬挂设备的安全标准
| Standard for Safety for Pipe Hanger Equipment for Fire Protection Service
|
ANSI/UL 2034-2005
| 单一和多测点一氧化碳探测器的安全标准
| Standard for Safety for Single and Multiple Station Carbon Monoxide Detectors
|
ANSI/UL 2044-2004
| 商用电视设备的安全标准
| Standard for Safety for Commercial Circuit Television Equipment
|
ANSI/UL 2079-2006
| 建筑物连接系统的防火试验安全标准
| Standard for Safety for Tests for Fire Resistance of Building Joint Systems
|
ANSI/UL 207a-2004
| 非电气的含制冷剂的元件和附件安全标准
| Standard for Safety for Refrigerant-Containing Components and Accessories, Nonelectrical (Bulletin dated 09/03/04)
|
ANSI/UL 2111-2002
| 电动机过热保护的安全标准
| Standard for Safety for Overheating Protection for Motors
|
ANSI/UL 2129CAN/ULC-S 566-2007
| 卤化烃清洁剂灭火器的安全标准
| Standard for Safety for Halocarbon Clean Agent Fire Extinguishers
|
ANSI/UL 213-2004
| 消防设备用加橡胶衬垫的管配件的安全标准
| Standard for Safety for Rubber Gasketed Fittings for Fire Protection Service
|
ANSI/UL 2157-2004
| 电动洗衣机和甩干机的安全标准
| Standard for Safety for Electric Clothes Washing Machines and Extractors
|
ANSI/UL 2167-2004
| 消防设备用水雾喷嘴的安全标准
| Standard for Safety for Water Mist Nozzles for Fire-Protection Service
|
ANSI/UL 218-2005
| 消防泵控制器的安全标准
| Standard for Safety for Fire Pump Controllers
|
ANSI/UL 2200-2004
| 固定式发动机驱动型发电机组件的安全标准
| Standard for Safety for Stationary Engine Generator Assemblies
|
ANSI/UL 2202-2004
| 电子车辆充电系统设备的安全标准
| Standard for Safety for Electric Vehicle (EV) Charging System Equipment
|
ANSI/UL 2225-2005
| 分类危险场所用的电缆和电缆装配安全标准
| Standard for Safety for Cables and Cable-Fittings for Use in Hazardous (Classified) Locations
|
ANSI/UL 2250-2006
| 仪器仪表装置用盘式电缆的安全标准
| Standard for Safety for Instrumentation Tray Cable
|
ANSI/UL 2255-2006
| 插塞的安全标准
| Standard for Safety for Receptacle Closures
|
ANSI/UL 2267-2006
| 工业电瓶货车设备用燃料电池电源系统安全标准
| Standard for Safety for Fuel Cell Power Systems for Installation in Industrial Electric Trucks
|
ANSI/UL 2279-1997
| I级0、1和2类危险场所中使用的电气设备的安全标准
| Standard for Safety for Electrical Equipment for Use in Class I, Zone 0, 1, and 2 Hazardous (Classified) Locations
|
ANSI/UL 2351-2004
| 防火用喷嘴的安全标准
| Standard for Safety for Spray Nozzles for Fire-Protection Service
|
ANSI/UL 2388-2006
| 柔性照明产品的安全标准
| Standard for Safety for Flexible Lighting Products
|
ANSI/UL 2390-2004
| 带密封板的防风沥青墙面板试验方法的安全标准
| Standard for Safety for Test Method for Wind Resistant Asphalt Shingles with SealedTabs
|
ANSI/UL 2438-2006
| 户外季节性使用的电线连接的布线设备的安全标准
| Standard for Safety for Outdoor Seasonal-Use Cord-Connected Wiring Devices
|
ANSI/UL 248-1-2005
| 低压熔断器安全标准.第1部分:一般要求
| Standard for Safety for Low-Voltage Fuses - Part 1: General Requirements
|
ANSI/UL 248-10-2004
| 低压熔断器安全标准.第10部分:L类熔断器
| Standard for Safety for Low-Voltage Fuses - Part 10: Class L Fuses
|
ANSI/UL 248-11-2005
| 低压熔断器安全标准.第11部分:插入式熔断器
| Standard for Safety for Low-Voltage Fuses - Part 11: Plug Fuses
|
ANSI/UL 248-12-2005
| 低压熔断器安全标准.第12部分:R类熔断器
| Standard for Safety for Low-Voltage Fuses - Part 12: Class R Fuses
|
ANSI/UL 248-13-2005
| 低压熔断器安全标准.第13部分:半导体熔断器
| Standard for Safety for Low-Voltage Fuses - Part 13: Semiconductor Fuses
|
ANSI/UL 248-14-2005
| 低压熔断器安全标准.第14部分:辅助熔断器
| Standard for Safety for Low-Voltage Fuses - Part 14: Supplemental Fuses
|
ANSI/UL 248-15-2005
| 低压熔断器安全标准.第15部分:T类熔断器
| Standard for Safety for Low-Voltage Fuses - Part 15: Class T Fuses
|
ANSI/UL 248-16-2004
| 低压熔断器安全标准.第16部分:试验限制器
| Standard for Safety for Low-Voltage Fuses - Part 16: Test Limiters
|
ANSI/UL 248-2-2005
| 低压熔断器安全标准.第2部分:C类熔断器
| Standard for Safety for Low-Voltage Fuses - Part 2: Class C Fuses
|
ANSI/UL 248-3-2005
| 低压熔断器安全标准.第3部分:CA和CB类熔断器
| Standard for Safety for Low-Voltage Fuses - Part 3: Class CA and CB Fuses
|
ANSI/UL 248-4-2005
| 低压熔断器安全标准.第4部分:CC类熔断器
| Standard for Safety for Low-Voltage Fuses - Part 4: Class CC Fuses
|
ANSI/UL 248-5-2005
| 低压熔断器安全标准.第5部分:G类熔断器
| Standard for Safety for Low-Voltage Fuses - Part 5: Class G Fuses
|
ANSI/UL 248-6-2005
| 低压熔断器安全标准.第6部分:H类不可更新熔断器
| Standard for Safety for Low-Voltage Fuses - Part 6: Class H Non-Renewable Fuses
|
ANSI/UL 248-7-2005
| 低压熔断器安全标准.第7部分:H类可更新熔断器
| Standard for Safety for Low-Voltage Fuses - Part 7: Class H Renewable Fuses
|
ANSI/UL 248-8-2005
| 低压熔断器安全标准.第8部分:J类熔断器
| Standard for Safety for Low-Voltage Fuses - Part 8: Class J Fuses
|
ANSI/UL 248-9-2005
| 低压熔断器安全标准.第9部分:K类熔断器
| Standard for Safety for Low-Voltage Fuses - Part 9: Class K Fuses
|
ANSI/UL 2556-2007
| 电线和电缆试验方法的安全标准
| Standard for Safety for Wire and Cable Test Methods
|
ANSI/UL 263-2003
| 建筑结构和材料防火试验的安全标准
| Standard for Safety for Fire Tests of Building Construction and Materials
|
ANSI/UL 283-2007
| 空气清新剂和除臭剂的安全标准
| Standard for Safety for Air Fresheners and Deodorizers
|
ANSI/UL 296A-2004
| 废油燃烧空气加热设施安全标准
| Standard for Safety for Waste Oil-Burning Air-Heating Appliances
|
ANSI/UL 299CAN/ULC-S 504-2007
| 干化学灭火器安全标准
| Standard for Safety for Dry Chemical Fire Extinguishers
|
ANSI/UL 300-2005
| 餐厅烹饪区保护用消防系统火灾试验的安全标准
| Standard for Safety for Fire Testing of Fire Extinguishing Systems for Protection of Restaurant Cooking Areas
|
ANSI/UL 3044-1998
| 监视用闭路电视设备安全标准
| Standard for Safety for Surveillance Closed Circuit Television Equipment
|
ANSI/UL 305-2007
| 应急设备的安全标准
| Standard for Safety for Panic Hardware
|
ANSI/UL 325-2007
| 门、窗帘、大门、百页窗和窗户控制器及系统的安全标准
| Standard for Safety for Door, Drapery, Gate, Louver, and Window Operators and Systems)
|
ANSI/UL 346-2005
| 防火信令系统用水流量指示器的安全标准
| Standard for Safety for Waterflow Indicators for Fire Protective Signaling Systems
|
ANSI/UL 365-2004
| 与警察局相连的防盗警报装置和系统的安全标准
| Standard for Safety for Police Station Connected Burglar Alarm Units and Systems
|
ANSI/UL 391-2006
| 烧固体燃料和组合燃料的中心和辅助炉的安全标准
| Standard for Safety for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces
|
ANSI/UL 399-2004
| 饮用水冷却器安全标准
| Standard for Safety for Drinking Water Coolers
|
ANSI/UL 401-2004
| 防火服务用便携式喷雾软管喷嘴的安全标准
| Standard for Safety for Portable Spray Hose Nozzles for Fire-Protection Service (bulletin dated February 16, 2004)
|
ANSI/UL 404-2006
| 压缩气体装置用压力指示计的安全标准
| Standard for Safety for Gauges, Indicating Pressure, for Compressed Gas Service
|
ANSI/UL 405-2004
| 消防机构连接管线的安全标准
| Standard for Safety for Fire Department Connections
|
ANSI/UL 407-2004
| 压缩气体用多支管的安全标准
| Standard for Safety for Manifolds for Compressed Gases
|
ANSI/UL 414-2006
| 仪表插座的安全标准
| Standard for Safety for Meter Sockets
|
ANSI/UL 4248-1-2007
| 熔断器支架安全标准.第1部分:一般要求
| Standard for Safety for Fuseholders - Part 1: General Requirements
|
ANSI/UL 4248-11-2007
| 熔断器支持件安全标准.第11部分:C型(爱迪生底座)和S型插入式熔断器
| Standard for Safety for Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse
|
ANSI/UL 4248-12-2007
| 熔断器支架安全标准.第12部分:R类
| Standard for Safety for Fuseholders - Part 12: Class R
|
ANSI/UL 4248-15-2007
| 熔断器支架安全标准.第15部分:T类
| Standard for Safety for Fuseholders - Part 15: Class T
|
ANSI/UL 4248-4-2007
| 熔断器支架安全标准.第4部分:CC类
| Standard for Safety for Fuseholders - Part 4: Class CC
|
ANSI/UL 4248-5-2007
| 熔断器支架安全标准.第5部分:G类
| Standard for Safety for Fuseholders - Part 5: Class G
|
ANSI/UL 4248-6-2007
| 熔断器支架安全标准.第6部分:H类
| Standard for Safety for Fuseholders - Part 6: Class H
|
ANSI/UL 4248-8-2007
| 熔断器支架安全标准.第8部分:J类
| Standard for Safety for Fuseholders - Part 8: Class J
|
ANSI/UL 4248-9-2007
| 熔断器支架安全标准.第9部分:K类
| Standard for Safety for Fuseholders - Part 9: Class K
|
ANSI/UL 427-2006
| 制冷装置的安全标准
| Standard for Safety for Refrigerating Units
|
ANSI/UL 441-2006
| 透气管道安全标准
| Standard for Safety for Gas Vents
|
ANSI/UL 444-2006
| 通信电缆安全标准
| Standard for Safety for Communications Cables
|
ANSI/UL 448-2007
| 消防设备用泵的安全标准
| Standard for Safety for Pumps for Fire-Protection Service
|
ANSI/UL 458-2006
| 游乐车辆电力变流器及电力变流器系统的安全标准
| Recreational Vehicles, Safety Standard for Power Converters and Power-Converter Systems
|
ANSI/UL 482-2005
| 便携式太阳能/热能灯安全标准
| Standard for Safety for Portable Sun/Heat Lamps
|
ANSI/UL 484-2005
| 房间空气调节器的安全标准
| Standard for Safety for Room Air Conditioners
|
ANSI/UL 486D-2005
| 密封导线连接器的安全标准
| Standard for Safety for Sealed Wire Connectors
|
ANSI/UL 489-2006
| 模压外壳断路器、模压外壳开关和断路器外壳的安全标准(推荐日期2006-3-10)
| Standard for Safety for Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures (Proposals dated March 10, 2006)
|
ANSI/UL 497-2004
| 双导线通信电路保护器的安全标准
| Standard for Safety for Protectors for Paired Conductor Communications Circuits
|
ANSI/UL 498A-2003
| 分插座和转接器的安全标准
| Standard for Safety for Current Taps and Adapters
|
ANSI/UL 499-2005
| 电加热设备的安全标准
| Standard for Safety for Electric Heating Appliances
|
ANSI/UL 5085-1-2006
| 低压变压器安全标准.第1部分:一般要求
| Standard for Safety for Low Voltage Transformers - Part 1: General Requirements
|
ANSI/UL 5085-2-2006
| 低压变压器安全标准.第2部分:一般用途变压器
| Standard for Safety for Low Voltage Transformers - Part 2: General Purpose Transformers
|
ANSI/UL 5085-3-2006
| 低压变压器安全标准.第3部分:2和3类变压器
| Standard for Safety for Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers
|
ANSI/UL 50E-2007
| 电气设备用外壳环境考虑的安全标准
| Standard for Safety for Enclosures for Electrical Equipment, Environmental Considerations
|
ANSI/UL 514A-2007
| 金属出线盒安全标准
| Standard for Safety for Metallic Outlet Boxes
|
ANSI/UL 514B-2007
| 导管、管道和电缆配件用安全标准
| Standard for Safety for Conduit, Tubing, and Cable Fittings
|
ANSI/UL 542-2005
| 荧光灯用起动器的安全标准
| Standard for Safety for Starters for Fluorescent Lamps
|
ANSI/UL 555-2006
| 防火器安全标准
| Standard for Safety for Fire Dampers
|
ANSI/UL 555S-2006
| 防烟器安全标准
| Standard for Safety for Smoke Dampers
|
ANSI/UL 568-2004
| 非金属电缆盘系统的安全标准
| Standard for Safety for Nonmetallic Cable Tray Systems
|
ANSI/UL 588-2006
| 季节和假日用装饰品的安全标准
| Standard for Safety for Seasonal and Holiday Decorative Products
|
ANSI/UL 5A-2003
| 非金属表面电缆管道和配件的安全标准
| Standard for Safety for Non-Metallic Surface Raceways and Fittings
|
ANSI/UL 60079-0-2005
| 爆炸性气体环境用电气设备的安全标准.第0部分:一般要求
| Standard for Safety for Electrical Apparatus Gas Explosive - Part 0: General Requirements
|
ANSI/UL 60079-1-2005
| 爆炸性气体环境用电气设备的安全标准.第6部分:防火外壳"d"型
| Standard for Safety for Electrical Apparatus Gas Explosive - Part 6: Flameproof enclosurers "d"
|
ANSI/UL 60079-11-2002
| 爆炸性气体环境用电气设备的安全标准.第11部分:原有安全度"i"
| Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 11: Intrinsic Safety "i"
|
ANSI/UL 60079-15-2002
| 爆炸性气体环境用电气设备的安全标准.第15部分:防护类型"n"
| Standard for Safety for Electrical Apparatus Gas Explosive - Part 15: Type of Protection "n"
|
ANSI/UL 60079-18-2005
| 爆炸性气体环境用电气设备的安全标准.第18部分:封装"m"型
| Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 18: Encapsulation "m"
|
ANSI/UL 60079-5-2002
| 爆炸性气体环境用电气设备的安全标准.第5部分:填充粉末"q"
| Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling "q"
|
ANSI/UL 60079-6-2002
| 爆炸性气体环境用电气设备的安全标准.第6部分:油浸"o"
| Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 6: Oil-Immersion "o"
|
ANSI/UL 60079-7-2002
| 爆炸性气体环境用电气设备的安全标准.第7部分:安全性增强"e"
| Standard for Safety for Electrical Apparatus Gas Explosive - Part 7: Increased safety "e"
|
ANSI/UL 60335-2-3-2005
| 家用和类似用途电器的安全标准.第2部分:电熨斗的特殊要求
| Standard for Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons
|
ANSI/UL 60335-2-34-2005
| 家用和类似用途电器的安全标准.第2部分:电动压缩机的特殊要求
| Standard for Safety for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Motor-Compressors
|
ANSI/UL 60730-2-8-2007
| 家用和类似用途的自动电气控制器的安全标准.第2部分:电动水阀的特殊要求(包括机械要求)
| Standard for Safety for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements
|
ANSI/UL 60745-2-11-2004
| 手持式电动工具的安全标准.安全.第2-11部分:往复锯的特殊要求
| Standard for Safety for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-11: Particular Requirements for Reciprocating Saws
|
ANSI/UL 60745-2-12-2005
| 手持式电动工具的安全标准.安全.第2-12部分:混凝土振捣器的特殊要求
| Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-12: Particular Requirements for Concrete Vibrators
|
ANSI/UL 60745-2-18-2005
| 手持式电动工具的安全标准.安全.第2-18部分:打包工具的特殊要求
| Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-18: Particular Requirements for Strapping Tools
|
ANSI/UL 60745-2-19-2005
| 手持式电动工具的安全标准.安全.第2-19部分:刨边机的特殊要求
| Standard for Safety for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-19: Particular Requirements for Jointers
|
ANSI/UL 60745-2-20-2005
| 手持式电动工具的安全标准.安全.第2-20部分:带锯的特殊要求
| Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-20: Particular Requirements for Band Saws
|
ANSI/UL 60745-2-21-2005
| 手持式电动工具的安全标准.安全.第2-21部分:排水沟清理机的特殊要求
| Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-21: Particular Requirements for Drain Cleaners
|
ANSI/UL 60947-1-2007
| 低压开关设备和控制设备的安全标准.第1部分:总则
| Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 1: General Rules
|
ANSI/UL 60947-4-1-2007
| 低压开关设备和控制设备的安全标准.第4-1部分:电流接触器和电动机起动器.电机接触器和电动机起动器
| Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
|
ANSI/UL 60947-5-2-2007
| 低压开关设备和控制设备的安全标准.第5-2部分:控制电路装置和开关元件.近接开关
| Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches
|
ANSI/UL 61010-1-2005
| 测量、控制和实验室用电气设备的安全标准.第1部分:一般要求
| Standard for Safety for Electrical Equipment for Measurement, Control, and Laboratory Use; Part 1: General Requirements
|
ANSI/UL 61058-1-2005
| 器具开关的安全标准
| Standard for Safety for Switches for Appliances
|
ANSI/UL 61496-2-2001
| 电敏保护设备的安全标准.第2部分:使用有源光电子保护装置的设备的特殊要求
| Standard for Safety for Electro-Sensitive Protective Equipment, Part 2: Particular Requirements for Equipment Using Active Opto-electronic Protective Devices
|
ANSI/UL 618-2003
| 混凝土圬工砌筑单元的安全规范
| Standard for Safety for Concrete Masonry Units
|
ANSI/UL 621-2005
| 冰淇淋制造机的安全标准
| Standard for Safety for Ice Cream Makers
|
ANSI/UL 626CAN/ULC-S 507-2007
| 水力灭火器的安全标准
| Standard for Safety for Water Fire Extinguishers 5
|
ANSI/UL 641-2005
| L型低温通风系统安全标准
| Standard for Safety for Type L Low-Temperature Venting Systems
|
ANSI/UL 67-2006
| 配电盘的安全标准
| Standard for Safety for Panelboards
|
ANSI/UL 696-2006
| 电动玩具的安全标准(推荐日期2006-4-7)
| Standard for Safety for Electric Toys (Proposal dated April 7, 2006)
|
ANSI/UL 710B-2004
| 再循环系统安全标准
| Standard for Safety for Recirculating Systems
|
ANSI/UL 719-2007
| 非金属护套电缆安全标准
| Standard for Safety for Nonmetallic-Sheathed Cables
|
ANSI/UL 72-2005
| 记录保护设备耐火性试验的安全标准
| Standard for Safety for Tests for Fire Resistance of Record Protection Equipment
|
ANSI/UL 723-2005
| 建筑材料表面燃烧特性试验的安全标准
| Standard for Safety for the Test for Surface Burning Characteristics of Building Materials
|
ANSI/UL 745-1-2004
| 便携式电动工具的安全标准.第1部分:一般要求
| Standard for Safety for Portable Electric Tools - Part 1: General Requirements
|
ANSI/UL 745-2-3-2006
| 研磨机、抛光机和盘式砂轮机特殊要求的安全标准
| Standard For Safety For Particular Requirements for Grinders, Polishers and Disk-Type Sanders
|
ANSI/UL 745-2-30-2006
| 订书机的安全标准.特殊要求
| Standard For Safety For Particular Requirements for Staplers
|
ANSI/UL 745-2-31-2006
| 金刚石芯钻头的安全标准.特殊要求
| Standard for Safety for Particular Requirements for Diamond Core Drills
|
ANSI/UL 745-2-32-2006
| 磁性钻压床的安全标准.特殊要求
| Standard for Safety for Particular Requirements for Magnetic Drill Presses
|
ANSI/UL 745-2-36-2006
| 手动工具的安全标准.特殊要求
| Standard for Safety for Particular Requirements for Hand Motor Tools
|
ANSI/UL 745-4-36-2006
| 电池组手动工具的特殊要求安全标准
| Standard for Safety for Particular Requirements for Battery Operated Hand Motor Tools
|
ANSI/UL 746A-2006
| 聚合材料的安全标准.短期性能评价
| Standard for Safety for Polymeric Materials - Short Term Property Evaluations
|
ANSI/UL 746B-2006
| 聚合材料安全标准.长期性状评价
| Standard for Safety for Polymeric Materials - Long Term Property Evaluations
|
ANSI/UL 746E-2007
| 聚合材料的安全标准.工业层压薄板、纤维缠绕管材、硫化纤维和印刷电路板用材料
| Standard for Safety for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed Wiring Boards
|
ANSI/UL 746F-2006
| 聚合材料的安全标准.印刷电路板和柔性材料互连结构用柔性介质薄膜材料
| Standard for Safety for Polymeric Materials - Flexible Dielectric Film Materials For Use in Printed Wiring Boards and Flexible Material Interconnect Constructions
|
ANSI/UL 751-2005
| 自动售货机安全标准
| Standard for Safety for Vending Machines
|
ANSI/UL 763-2004
| 电动商用食品准备机器的安全标准
| Standard for Safety for Motor-Operated Commercial Food Preparing Machines
|
ANSI/UL 79-2005
| 石油分配系统用电动泵的安全标准
| Standard for Safety for Power-Operated Pumps for Petroleum Dispensing Systems
|
ANSI/UL 790-2004
| 屋顶层材料防火试验的安全标准
| Standard for Safety for Tests for Fire Resistance of Roof Covering Materials
|
ANSI/UL 793-2004
| 用于烟和热的自动操作屋顶通风孔的安全标准
| Standard for Safety for Automatically Operated Roof Vents for Smoke and Heat
|
ANSI/UL 796F-2006
| 挠性材料互连结构的安全标准
| Standard for Safety for Flexible Materials Interconnect Constructions (Proposals dated 6/16/06)
|
ANSI/UL 80-2007
| 燃油喷嘴燃料用钢制槽罐的安全标准
| Standard for Safety for Steel Tanks for Oil-Burner Fuel (Bulletin dated June 22, 2007)
|
ANSI/UL 810-1998
| 电容器安全标准
| Standard for Safety for Capacitors
|
ANSI/UL 817-2007
| 电缆集和电源电缆用安全标准
| Standard for Safety for Cord Sets and Power-Supply Cords (Proposal dated March 9, 2007)
|
ANSI/UL 82-2007
| 电动园艺器具用安全标准
| Standard for Safety for Electric Garden Appliances
|
ANSI/UL 840-2007
| 包括间隙和漏电距离的绝缘配合用安全标准
| Standard for Safety for Insulation Coordination Including Clearances and Creepage
|
ANSI/UL 854-2007
| 引入电缆的安全标准
| Standard for Safety for Service-Entrance Cables
|
ANSI/UL 858A-2007
| 家用电灶与安全有关的固态控制器安全标准
| Standard for Safety for Safety-Related Solid-State Controls for Household Electric Ranges
|
ANSI/UL 884-2007
| 地板下导线管和配件的安全标准
| Standard for Safety for Underfloor Raceways and Fittings
|
ANSI/UL 896-2004
| 燃油炉安全标准
| Standard for Safety for Oil-Burning Stoves
|
ANSI/UL 8CAN/ULC-S 554-2007
| 水基试剂灭火器的安全标准
| Standard for Safety for Water Based Agent Fire Extinguishers
|
ANSI/UL 9-2004
| 窗户组件燃烧试验的安全标准
| Standard for Safety for Fire Tests of Window Assemblies
|
ANSI/UL 907-2006
| 壁炉组件安全标准
| Standard for Safety for Fireplace Accessories
|
ANSI/UL 913-2006
| 在I、II、III级1区危险场所使用的内在安全装置和附属装置的安全标准
| Standard for Safety for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, III, Division 1, Hazardous (Classified) Locations
|
ANSI/UL 921-2005
| 商用洗碗机安全标准
| Standard for Safety for Commercial Dishwashers
|
ANSI/UL 923-2007
| 微波灶具安全标准
| Standard for Safety for Microwave Cooking Appliances
|
ANSI/UL 982-2007
| 动力驱动的家用食品加工机的安全标准
| Standard for Safety for Motor-Operated Household Food Preparing Machines
|
ASME A 17.1b Addenda-2003
| 提升机和自动电梯安全规范.补充件
| (Safety code for elevators and escalators; Addenda)
|
ASME A90.1-1997
| 皮带式载人升降机的安全标准
| (Safety standard for belt manlifts)
|
ASME A90.1a Addenda-1999
| 皮带式载人升降机的安全标准
| (Safety standard for belt manlifts)
|
ASME B15.1 Interpretations Jan
| 机械动力传动设备的安全标准的说明
| (Interpretations: Safety standard for mechanical power transmission apparatus)
|
ASME B15.1-2000
| 机械动力传动装置的安全标准
| (Safety standard for mechanical power transmission apparatus)
|
ASME B19.1-1995
| 空气压缩机系统的安全标准
| (Safety standard for air compressor systems)
|
ASME B19.3-1991
| 加工工业用压缩机的安全标准
| (Safety standard for compressors for process industries)
|
ASME B19.3a Addenda-1994
| 加工工业用压缩机的安全标准.修改件
| (Safety standard for compressors for process industries; Addenda)
|
ASME B19.3b Addenda-1995
| 制造工业用压缩机的安全标准
| (Safety standard for compressors for process industries)
|
ASME B20.1 Interpretations Jan
| 输送机及其相关设备的安全标准的说明
| (Interpretations: Safety Standard for conveyors and related equipment)
|
ASME B20.1 Interpretations Oct
| 输送机及其相关设备的安全标准的说明
| (Interpretations: Safety Standard for conveyors and related equipment)
|
ASME B30.9-1996
| 悬带.空中索道、起重机、铁塔架、升降机、钓勾, 旗杆架的安全标准
| (Slings - Safety standard for cableways, cranes, derricks, hoists, hooks, jacks, and slings)
|
ASME B56.1 Interpretations Jan
| 低提升和高提升装卸车安全标准的说明
| (Interpretations: Safety standard for low lift and high lift trucks)
|
ASME B56.1-2000
| 低升程和高升程货车的安全标准
| (Safety standard for low lift and high lift trucks)
|
ASME B56.10-1992
| 人工操作高提升工业装卸车的安全标准
| (Safety standard for manually propelled high lift industrial trucks)
|
ASME B56.1a Addenda-2001
| 低提升和高提升装卸车安全标准.ASME B 56.1-2000的补充件
| (Safety standard for low lift and high lift trucks; Addenda to ASME B 56.1-2000)
|
ASME B56.1b Addenda-2003
| 低升降和高升降式装卸车的安全标准.补充件
| (Safety standard for low lift and high lift trucks; Addenda)
|
ASME B56.5 Interpretations Jul
| 工业轨道式车辆和载人工业车辆自动化功能的安全标准说明
| (Interpretations: Safety standard for guided industrial vehicles and automated functions of manned industrial vehicles)
|
ASME B56.5-1993
| 工业轨道式车辆和载人工业车辆自动化功能的安全标准
| (Safety standard for guided industrial vehicles and automated functions of manned industrial vehicles)
|
ASME B56.5a Addenda-1994
| 工业轨道式车辆和载人工业车辆自动化功能的安全标准修改件
| (Safety standard for guided industrial vehicles and automated functions of manned industrial vehicles; Addenda)
|
ASME B56.6 Interpretations Mar
| 不平地用的铲车的安全标准的说明
| (Interpretations: Safety standard for rough terrain forklift trucks)
|
ASME B56.7-1987
| 工业卡车起重机的安全标准
| (Safety standard for industrial crane trucks)
|
ASME B56.8 Interpretations Aug
| 人和料运载工具的安全标准的说明
| (Interpretations: Safety standard for personnel and burden carriers)
|
ASME B56.8-1993
| 人和料运载工具的安全标准
| (Safety standard for personnel and burden carriers)
|
ASME B56.8a Addenda-1994
| 人和料运载工具的安全标准.修改件
| (Safety standard for personnel and burden carriers; Addenda)
|
ASME B56.9 Interpretations 199
| 人工操作的工业牵引车安全标准说明
| (Interpretations: Safety standard for operator controlled industrial tow tractors)
|
ASME B56.9-1992
| 人工操作工业牵引拖拉机的安全标准
| (Safety standard for operator controlled industrial tow tractors)
|
ASME B56.9a Addenda-1992
| 人工操作工业牵引拖拉机的安全标准修改件
| (Safety standard for operator controlled industrial tow tractors; Addenda)
|
ASTM A 143/A 143M-2007
| 热浸镀锌结构钢制品的防脆裂安全措施和探测脆裂用程序的标准实施规程
| Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
|
ASTM A 384/A 384M-2007
| 钢组件热浸镀锌时抗扭曲和变形的安全措施用标准实施规程
| Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
|
ASTM E 50-2000
| 金属、矿物和相关材料的化学分析用仪器、试剂和安全措施的标准操作规程
| Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
|
ASTM F 1004-2007
| 膨胀门和膨胀围栏用消费者安全标准规范
| Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
|
ASTM F 1235-2003
| 便携式钩接式座椅的消费者安全标准规范
| Consumer Safety Specification for Portable Hook-on Chairs
|
ASTM F 1250-2000
| 固定式训练用自行车的消费者安全规范
| Standard Safety Specification for Stationary Exercise Bicycles
|
ASTM F 1352-2002
| 固定刃的粗大尖形铁箭头的性能和安全标准的标准指南
| Standard Guide for Fixed Blade Broadhead Performance and Safety Standards
|
ASTM F 1427-2007
| 床铺用消费者安全标准规范
| Standard Consumer Safety Specification for Bunk Beds
|
ASTM F 1816-1997
| 儿童外上衣上综线的标准安全规范
| Standard Safety Specification for Drawstrings on Children's Upper Outerwear
|
ASTM F 1821-2006
| 婴儿床的消费者安全标准规范
| Standard Consumer Safety Specification for Toddler Beds
|
ASTM F 1912-1998
| 豆袋椅安全标准规范
| Standard Specification for Safety of Bean Bag Chairs
|
ASTM F 1967a-2007
| 儿童浴室椅的消费者安全标准规范
| Standard Consumer Safety Specification for Infant Bath Seats
|
ASTM F 2006-2000
| 非紧急出口和营救窗口用窗下落防护装置的标准安全规范
| Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
|
ASTM F 2057-2004
| 柜、门柜和厨柜标准安全规范
| Standard Safety Specification for Chests, Door Chests, and Dressers
|
ASTM F 2085-2007
| 活动式床围栏的消费者安全标准规范
| Standard Consumer Safety Specification for Portable Bed Rails
|
ASTM F 2167b-2005
| 婴儿用弹性座椅的标准消费者安全规范
| Standard Consumer Safety Specification for Infant Bouncer Seats
|
ASTM F 2201-2002
| 通用打火机的消费者安全标准规范
| Standard Consumer Safety Specification for Utility Lighters
|
ASTM F 2225-2006
| 蹦床外罩的消费者标准安全规范
| Standard Safety Specification for Consumer Trampoline Enclosures
|
ASTM F 2236-2003
| 软的婴儿运载工具的消费者安全标准规范
| Standard Consumer Safety Specification for Soft Infant Carriers
|
ASTM F 2264-2003
| 无动力装置的小型摩托车的消费者安全标准规范
| Standard Consumer Safety Specification for Non-Powered Scooters
|
ASTM F 2369-2004
| 非整体火器锁紧装置用标准安全规范
| Standard Safety Specification for Non-Integral Firearm Locking Devices
|
ASTM F 2372-2004
| 购物车的消费者安全标准性能规范
| Standard Consumer Safety Performance Specification for Shopping Carts
|
ASTM F 2388-2006
| 家用婴儿可调桌子的消费者标准安全规范
| Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use
|
ASTM F 2417-2004
| 蜡烛的防火安全标准规范
| Standard Specification for Fire Safety for Candles
|
ASTM F 2549-2006
| 运送儿童用车架的标准消费者安全规范
| Standard Consumer Safety Specification for Frame Child Carriers
|
ASTM F 2611-2006
| 钢丝链安全防护栏结构的标准规范
| Standard Guide for Design and Construction of Chain Link Security Fencing
|
ASTM F 2613-2007
| 儿童折叠椅的消费者安全标准规范
| Standard Consumer Safety Specification for Children's Folding Chairs
|
ASTM F 381-2006
| 消费者蹦床的部件、组装、使用和标签用标准安全规范
| Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
|
ASTM F 404-2007
| 高脚椅的消费者安全标准规范
| Standard Consumer Safety Specification for High Chairs
|
ASTM F 406-2007
| 非实际大小的婴儿床/玩耍场地用消费者安全标准规范
| Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
|
ASTM F 446-1985
| 浴池区域内安装的抓杆和辅助装置的消费者安全标准规范
| Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
|
ASTM F 462-1979
| 浴池防滑设施的消费者安全标准规范
| Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities
|
ASTM F 513-2000
| 水球运动员眼睛和面部防护设备的标准安全规范
| Standard Safety Specification for Eye and Face Protective Equipment for Hockey Players
|
ASTM F 963-2007
| 玩具安全性用消费者安全标准规范
| Standard Consumer Safety Specification for Toy Safety
|
ASTM F 966-2000
| 全尺寸和非全尺寸的婴儿床角柱延伸件的消费者安全规范
| Consumer Safety Specification for Full-Size and Non-Full-Size Baby Crib Corner Post Extensions
|
IEEE 338-1987
| 核电站安全系统周期试验的准则
| (Criteria for the periodic surveillance testing of nuclear power generating station safety systems)
|
IEEE 352-1987
| 核电站安全系统可靠度分析通用原则指南
| (Guide for general principles of reliability analysis of nuclear power generating station safety systems)
|
IEEE 379-2000
| 核电站安全系统中单一故障标准的应用
| (Application of the single-failure criterion to nuclear power generating station safety systems)
|
IEEE 577-1976
| 核电站安全系统的设计和运行中的可靠性分析要求
| (Requirements for reliability analysis in the design and operation of safety systems for nuclear power generating stations)
|
IEEE 603-1998
| 核电站安全系统准则
| (Criteria for safety systems for nuclear power generating stations)
|
IEEE 627-1980
| 核电站安全系统设备的设计鉴定
| (Design qualification of safety systems equipment used in nuclear power generating stations)
|
IEEE 692-1997
| 核电站安全系统准则
| (Criteria for security systems for nuclear power generating stations)
|
IEEE 7-4.3.2-1993
| 核能发电站安全系统中数字计算机的规范要求
| (Criteria for digital computers in safety systems of nuclear power generating stations)
|
IEEE C 2-2002
| 国家电气安全规程
| (National electrical safety code)
|
UL 14B-1998
| 水平安装白铁皮包覆防水门用滑动小五金的安全标准
| (Sliding hardware for standard, horizontally mounted tin-clad fire doors )
|
UL 14C-1999
| 标准白铁皮包覆防火单门和双门用转动小五金的安全标准
| (Swinging hardware for standard tin-clad fire doors mounted singly and in pairs )
|
UL 22-1999
| 娱乐和赌博机的安全标准
| (Amusement and gaming machines )
|
编号 | 中文名称 | 英文名称 |