| 编号 | 中文名称 | 英文名称 |
|---|
| ISO 10079-1-1999
| 医疗吸引设备 第1部分:电动吸引设备 安全要求
| Medical suction equipment - Part 1: Electrically powered suction equipment - Safety requirements
|
| ISO 10131-1-1997
| 折叠床 安全要求和试验 第1部分:安全技术要求
| Foldaway beds - Safety requirements and tests - Part 1: Safety requirements
|
| ISO 10131-2-1997
| 折叠床 安全要求和试验 第2部分:试验方法
| Foldaway beds - Safety requirements and tests - Part 2: Test methods
|
| ISO 10218-1-2006
| 工业环境的机器人.安全要求.第1部分:机器人
| Robots for industrial environments - Safety requirements - Part 1: Robot
|
| ISO 10472-1-1997
| 工业洗衣机安全要求 第1部分:通用要求
| Safety requirements for industrial laundry machinery - Part 1: Common requirements
|
| ISO 10472-2-1997
| 工业洗衣机安全要求 第2部分:洗衣机和洗涤脱水机
| Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors
|
| ISO 10472-3-1997
| 工业洗衣机安全要求 第3部分:管道式洗涤(联合)机及相关机械
| Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines
|
| ISO 10472-4-1997
| 工业洗衣机安全要求 第4部分:空气干燥机
| Safety requirements for industrial laundry machinery - Part 4: Air dryers
|
| ISO 10472-5-1997
| 工业洗衣机安全要求 第5部分:织物熨烫机、进布机和折布机
| Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders
|
| ISO 10472-6-1997
| 工业洗衣机安全要求 第6部分:熨烫及熔压机
| Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses
|
| ISO 10517-1993
| 便携式电动树 篱修剪机 定义、机械安全要求和试验
| Portable powered hedge trimmers; definitions, mechanical safety requirements and tests
|
| ISO 10821-2005
| 工业缝纫机械.缝纫机械、设备和系统的安全要求
| Industrial sewing machines - Safety requirements for sewing machines, units and systems
|
| ISO 11102-1-1997
| 往复式内燃机 手柄起动装置 第1部分:安全要求和试验
| Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests
|
| ISO 11111-1-2005
| 纺织机械.安全要求.第1部分:通用要求
| Textile machinery - Safety requirements - Part 1: Common requirements
|
| ISO 11111-2-2005
| 纺织机械.安全要求.第2部分:纺纱预备和纺纱机械
| Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines
|
| ISO 11111-3-2005
| 纺织机械.安全要求.第3部分:无纺机械
| Textile machinery - Safety requirements - Part 3: Nonwoven machinery
|
| ISO 11111-4-2005
| 纺织机械.安全要求.第4部分:纱线加工和绳索制造机械
| Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery
|
| ISO 11111-5-2005
| 纺织机械.安全要求.第5部分:织造和针织用的预备机械
| Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting
|
| ISO 11111-6-2005
| 纺织机械.安全要求.第6部分:织物织造机械
| Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery
|
| ISO 11111-7-2005
| 纺织机械.安全要求.第7部分:染色和精整机械
| Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery
|
| ISO 11448-1997
| 撕碎机和风凿机 定义、安全要求和实验程序
| Powered shredders and chippers - Definitions, safety requirements and test procedures
|
| ISO 11449-1994
| 步行式激动旋转舵杆 定义、安全要求和试验方法
| Walk-behind powered rotary tillers - Definitions, safety requirements and test procedures
|
| ISO 11540-1993
| 14岁以下儿童书写和划线用具罩的安全要求
| Caps for writing and marking instruments intended for use by children up to 14 years of age; safety requirements
|
| ISO 11553-1-2005
| 机械安全.激光加工机械.第1部分:一般安全要求
| Safety of machinery - Laser processing machines - Part 1: General safety requirements
|
| ISO 11680-1-2000
| 林业机械 动力杆式修枝锯的安全要求和试验 第1部分:侧挂式杆式修枝锯
| Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine
|
| ISO 11680-2-2000
| 林业机械 动力杆式修枝锯的安全要求和试验 第2部分:携背负式杆式修枝锯
| Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source
|
| ISO 11681-1-2004
| 林业机械.便携式链锯的安全要求和试验.第1部分:林业专用链锯
| Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service
|
| ISO 11681-2-2006
| 林业机械.便携式链锯的安全要求和试验.第2部分:修枝链锯
| Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service
|
| ISO 11789-1999
| 刚性切割工具的机动边缘 定义、安全要求和试验过程
| Powered edgers with rigid cutting means - Definitions, safety requirements and test procedures
|
| ISO 11850-2003
| 林业机械.自行式机械.安全要求
| Machinery for forestry - Self-propelled machinery - Safety requirements
|
| ISO 12401-2004
| 小艇.游艇用甲板安全带和保险绳.安全要求和试验方法
| Small craft - Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods
|
| ISO 12402-1-2005
| 个人漂浮设备.第1部分:海上行船用救生衣.安全要求
| Personal flotation devices - Part 1: Lifejackets for seagoing ships - Safety requirements
|
| ISO 12402-8-2006
| 个人漂浮设备.第8部分:附件.安全要求和试验方法
| Personal flotation devices - Part 8: Accessories - Safety requirements and test methods
|
| ISO 12648-2006
| 图形技术.印刷机系统的安全要求
| Graphic technology - Safety requirements for printing press systems
|
| ISO 12649-2004
| 绘图技术.装订和整理系统和设备的安全要求
| Graphic technology - Safety requirements for binding and finishing systems and equipment
|
| ISO 14314-2004
| 往复式内燃机.反冲起动设备.一般安全要求
| Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements
|
| ISO 14400-2005
| 道路车辆.轮子和轮辋.使用、一般维护、安全要求和失效条件
| Road vehicles - Wheels and rims - Use, general maintenance and safety requirements and out-of-service conditions
|
| ISO 14620-1-2002
| 航天系统.安全要求.第1部分:系统安全
| Space systems - Safety requirements - Part 1: System safety
|
| ISO 14620-2-2000
| 航天系统 安全要求 第2部分:发射现场操作
| Space systems-- Safety requirments - Part 2: Launch site operations
|
| ISO 14620-3-2005
| 航天系统.安全要求 第3部分:飞行安全系统
| Space systems - Safety requirements - Part 3: Flight safety systems
|
| ISO 14740-1998
| 林业机械 割灌机、割草机、杆式修枝锯及类似机具的背负式发动机 安全要求和试验
| Forest machinery - Backpack power units for brush-cutters, grass-trimmers, pole-cutters and similar appliances - Safety requirements and testing
|
| ISO 14865-1998
| 林业机械 由背负发动机驱动的便携手持式割灌机和割草机 安全要求和试验
| Machinery for forestry - Portable hand-held brush-cutters and grass-trimmers with backpack-mounted combustion-engine power source - Safety requirements and testing
|
| ISO 15027-2-2002
| 浸渍服装.第2部分:废弃的服装,包括安全要求
| Immersion suits - Part 2: Abandonment suits, requirements including safety
|
| ISO 15190-2003
| 医学实验室.安全要求
| Medical laboratories - Requirements for safety
|
| ISO 15442-2005
| 起重机.装载机起重机的安全要求
| Cranes - Safety requirements for loader cranes
|
| ISO 15501-1-2001
| 道路车辆 压缩天然气燃料系统 第1部分：安全要求
| Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements
|
| ISO 15615-2002
| 气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全要求
| Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices
|
| ISO 15641-2001
| 高速机械加工用铣刀 安全要求
| Milling cutters for high speed machining - Safety requirements
|
| ISO 15817-2005
| 土方机械.远程驾驶员控制装置的安全要求
| Earth-moving machinery - Safety requirements for remote operator control
|
| ISO 16368-2003
| 移动式升降工作台.设计计算、安全要求和试验方法
| Mobile elevating work platforms - Design calculations, safety requirements and test methods
|
| ISO 19432-2006
| 建筑施工机械和设备.便携、手持、内燃机驱动的切断机.安全要求和试验
| Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing
|
| ISO 20957-1-2005
| 固定式训练器材.第1部分:一般安全要求和试验方法
| Stationary training equipment - Part 1: General safety requirements and test methods
|
| ISO 20957-2-2005
| 固定式训练器材.第2部分:力量训练器材附加的特殊安全要求和试验方法
| Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods |
| ISO 20957-4-2005
| 固定式训练设备.第4部分:力量训练台附加的特殊安全要求和试验方法
| Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods
|
| ISO 20957-5-2005
| 固定式训练设备.第5部分:踏板曲柄训练设备附加的特殊安全要求和检验方法
| Stationary training equipment - Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
|
| ISO 20957-6-2005
| 固定式训练设备.第6部分:脚踏车附加的特殊安全要求和试验方法
| Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods
|
| ISO 20957-7-2005
| 固定式训练设备.第7部分:划船机附加的特殊安全要求和试验方法
| Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test methods
|
| ISO 20957-8-2005
| 固定式训练设备.第8部分:步进机、阶梯攀缘器和攀缘器.附加的特殊安全要求和试验方法
| Stationary training equipment - Part 8: Steppers, stairclimbers and climbers, Additional specific safety requirements and test methods
|
| ISO 20957-9-2005
| 固定式训练设备.第9部分:椭圆形训练器材的附加特殊安全要求和试验方法
| Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods
|
| ISO 22702-2003
| 通用打火机.一般消费者安全要求
| Utility lighters - General consumer-safety requirements
|
| ISO 4210-1996
| 自行车 自行车的安全要求
| Cycles - Safety requirements for bicycles
|
| ISO 500-1 Technical Corrigendum 1-2005
| 农用拖拉机.后置式动力输出1、2、3型.第1部分:主挡板和余隙的一般规范、安全要求和尺寸.技术勘误1
| Agricultural tractors - Rear-mounted power take-off types 1, 2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone; Technical Corrigendum 1
|
| ISO 500-1-2004
| 农用拖拉机.后置式动力输出1、2、3型.第1部分:主挡板和余隙的一般规范、安全要求和尺寸
| Agricultural tractors - Rear-mounted power take-off types 1, 2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone
|
| ISO 5149-1993
| 制冷和加热用机械制冷系统 安全要求
| Mechanical refrigerating systems used for cooling and heating; safety requirements
|
| ISO 5395 AMD 1-1992
| 动力草坪割草机、草坪拖拉机、草坪和园艺拖拉机、专业割草机及其带割草附加装置的草坪和园艺拖拉机 定义 安
| Power lawn-mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments; definitions, safety requirements and test procedures; amendment 1
|
| ISO 5395-1990
| 动力草坪割草机、草坪拖拉机、草坪和园艺拖拉机、专业割草机及其带割草附加装置的草坪和园艺拖拉机 定义 安
| Power lawn-mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments; definitions; safety requirements and test procedures
|
| ISO 5673-1-2005
| 农业拖拉机和机械.动力输出主动轴和动力输入连接.第1部分:一般制造和安全要求
| Agricultural tractors and machinery - Power take-off drive shafts and power-input connection - Part 1: General manufacturing and safety requirements
|
| ISO 6218-2005
| 内河航行船只.顶推船手控连接装置.安全要求和主要尺寸
| Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions
|
| ISO 6966-2-2005
| 飞行器地面设备.基本要求.第2部分:安全要求
| Aircraft ground equipment - Basic requirements - Part 2: Safety requirements
|
| ISO 7175-1-1997
| 居室用儿童床和折叠床 第1部分:安全要求
| Children's cots and folding cots for domestic use - Part 1: Safety requirements
|
| ISO 8098-2002
| 自行车.幼童用自行车的安全要求
| Cycles - Safety requirements for bicycles for young children
|
| ISO 8230-1997
| 使用四氯乙烯的干洗机的安全要求
| Safety requirements for dry-cleaning machines using perchloroethylene
|
| ISO 8359-1996
| 医用氧气浓缩器 安全要求
| Oxygen concentrators for medical use - Safety requirements
|
| ISO 8437 AMD 1-1997
| 扫雪机 安全要求和试验程序 修改1
| Snowthrowers - Safety requirements and test procedures; Amendment 1
|
| ISO 8437-1989
| 扫雪机 安全要求和试验程序
| Snowthrowers; Safety requirements and test procedures
|
| ISO 8936-2003
| 敞篷车遮篷.安全要求
| Caravan awnings - Safety requirements
|
| ISO 9098-1-1994
| 家用双层床 安全要求和试验 第1部分:安全要求
| Bunk beds for domestic use - Safety requirements and tests - Part 1: Safety requirements
|
| ISO 9098-2-1994
| 家用双层床 安全要求和试验 第2部分:试验方法
| Bunk beds for domestic use - Safety requirements and tests - Part 2: Test methods
|
| ISO 9221-1-1992
| 家具.儿童高椅.第1部分:安全要求
| Furniture; children's high chairs; part 1: safety requirements
|
| ISO/IEC 15408-2-2005
| 信息技术.安全要求.IT安全的评价标准.第2部分:安全功能性要求
| Information technology - Security techniques - Evaluation criteria for IT security - Part 2: Security functional requirements
|
| ISO/IEC 19790-2006
| 信息技术.安全技术.密码模块的安全要求
| Information technology - Security techniques - Security requirements for cryptographic modules
|
| ISO/IEC ISP 10608-1 AMD 1-1998
| 信息技术.国际标准化轮廓TAnnnn.无连接方式网络服务之上的连接方式运输服务.第1部分:概述以及独立于子网的
| Information technology - International standardized profile TAnnnn - Connection-mode transport service over connectionless-mode network service; Part 1: General overview and subnetwork-independent requirements; Amendment 1: Reference optional security requirements - TAnn
|
| ISO/IEC ISP 10608-5 AMD 1-1998
| 信息技术 国际标准化轮廓TAnnnn 无连接方式网络服务之上的连接方式运输服务 第5部分:采用虚呼叫的X 25包交
| ()
|
| ISO/IEC ISP 10609-9 AMD 1-1998
| 信息技术 国际标准化轮廓TB、TC、TD和TE 连接方式网络服务之上的连接方式运输服务 第9部分:关于使用虚呼叫
| ()
|
| ISO/IEC ISP 10613-1 AMD 2-1998
| 信息技术 国际标准化轮廓RA 中继无连接方式网络服务 第1部分:独立于子网的要求 修改2:参考任选安全要求-Ran
| Information technology - International standardized profile RA - Relaying the connectionless-mode network service - Part 1: Subnetwork-independent requirements; Amendment 2: Reference optical security requirements - RAnn.nn profiles
|
| ISO/IEC ISP 10613-7 AMD 2-1998
| 信息技术 国际标准化轮廓RA 中继无连接方式网络服务 第7部分:在永久接入上虚呼叫的与PSDN子网相关、与媒体
| Information technology - International Standardized Profile RA - Relaying the connectionless-mode network service - Part 7: PSDN subnetwork-dependent, media-dependent requirements for virtual calls over a permanent access; Amendment 2: Reference optional security requirements specific to X.25 subnetworks - RAnn.11n1
|
| ISO/TS 22559-1-2004
| 提升机(电梯)的安全要求.第1部分:全球基础安全要求(GESRs)
| Safety requirements for lifts (elevators) - Part 1: Global essential safety requirements (GESRs)
|
| 编号 | 中文名称 | 英文名称 |
|---|