编号 | 中文名称 | 英文名称 |
---|---|---|
GB/T 1149.1-1994 | 内燃机活塞环通用规则 | Internal combustion engines--Piston rings--General specifications |
GB/T 1149.2-1994 | 内燃机活塞环术语 | Internal combustion engines--Piston rings--Vocabulary |
GB/T 1149.3-1992 | 内燃机活塞环刮环 | Internal combustion engines--Piston rings--Scraper rings |
GB/T 1149.4-1994 | 内燃机活塞环技术要求 | Internal combustion engines--Piston rings--Quality requirements |
GB/T 1149.5-1992 | 内燃机活塞环油环 | Internal combustion engines--Piston rings--Oil control rings |
GB/T 1149.6-1994 | 内燃机活塞环检验方法 | Internal combustion engines--Piston rings--Inspection measuring principles |
GB/T 1149.7-1994 | 内燃机活塞环螺旋撑簧油环 | Internal combustion engines--Piston rings--Coil-spring-loaded oil control rings |
GB/T 2348-1993 | 液压气动系统及元件缸内径及活塞杆外径 | Fluid power systems and components--Cylinder bores and piston rod diameters |
GB/T 14222-1993 | 内燃机活塞环矩形环 | Internal combustion engines--Piston rings--Rectangular rings |
ANSI B93.3-1984 | 汽缸孔和活塞杆直径.英制系列 | Cylinder Bore and Piston Rod Diameters - Inch Series |
ANSI B93.32M-1973 | 流体动力径向压缩型活塞环的环槽尺寸 | Groove dimensions for fluid power radial compression type piston rings |
ANSI B93.36M-1973 | 浮式金属和非金属流体动力活塞环凹槽尺寸 | Floating Type Metallic and Non-Metallic Fluid Power Piston Rings, Groove Dimensions for |
ANSI B93.76-1988 | 液压气动缸.往复运动用活塞和活塞杆密封腔的尺寸和公差 | Hydraulic Fluid Power - Cylinders - Housings for Piston and Rod Seals in Reciprocating Applications - Dimensions and Tolerances |
ANSI/ASTM D4857-2004 | 令二冲程循环汽油发动机(外侧发动机除外)中活塞环结胶和活塞沉积物最小化的润滑剂作用的测定 | Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards, Test Method for (05.03) |
ANSI/SAE J1588-1998 | 内燃机.活塞环.词汇 | Internal Combustion Engines - Piston Rings - Vocabulary |
ANSI/SAE J1589-1998 | 内燃机.活塞环.检查测量原则 | Internal Combustion Engines - Piston Rings - Inspection Measuring Principles |
ANSI/SAE J1590-1998 | 内燃机.活塞环.材料规范 | Internal Combustion Engines - Piston Rings - Material Specifications |
ANSI/SAE J1591-1998 | 内燃机.活塞环.通用规范 | Internal Combustion Engines - Piston Rings - General Specifications |
ANSI/SAE J1996-1992 | 内燃机活塞环质量要求 | Internal Combuston Engines - Piston Rings, Quality Requirements |
ANSI/SAE J1997-1989 | 内燃机.活塞环.矩形截面环 | Internal Combustion Engines - Piston Rings - Rectangular Rings |
ANSI/SAE J1998-1992 | 内燃机.活塞环.窄宽度矩形环 | Internal Combustion Engines - Piston Rings - Rectangular Rings with Narrow Ring Width |
ANSI/SAE J1999-1992 | 内燃机.活塞环.刮油环 | Internal Combustion Engines - Piston Rings - Scraper Rings |
ANSI/SAE J2000-1992 | 内燃机.活塞环.梯形环 | Internal Combustion Engines - Piston Rings - Keystone Rings |
ANSI/SAE J2001-1992 | 内燃机活塞环.单面梯形(活塞)气环 | Internal Combustion Engines - Piston Rings - Half Keystone Rings |
ANSI/SAE J2002-1992 | 内燃机.活塞环.护油环 | Internal Combustion Engines - Piston Rings - Oil Control Rings |
ANSI/SAE J2003-1992 | 内燃机.活塞环.螺旋弹簧定位的护油环 | Internal Combustion Engines - Piston Rings - Coil Spring Loaded Oil Control Rings |
ANSI/SAE J2004-1992 | 内燃机.活塞环.撑胀器/组合式护油环 | Internal Combustion Engines - Piston Rings - Expander/Segment Oil Control Rings |
ANSI/SAE J2226-1998 | 内燃机.活塞环.钢矩形环 | Internal Combustion Engines - Piston Rings - Steel Rectangular Rings |
ASTM D 4857-2003 | 将二冲程循环汽油发动机(外侧发动机除外)中的活塞环结胶和活塞积垢减到最小的润滑油能力测定用标准试验方法 | Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards |
ASTM G 181-2004 | 在润滑条件下进行活塞环和缸衬材料摩擦试验的标准实施规程 | Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
BS 4K 6-1928 | 飞机材料规范.铸铁活塞环槽(砂型铸和冷铸) | Specification for aircraft material - Cast iron piston ring pots (sand cast and chill cast) |
BS 5341-5-1976 | 往复式内燃机用直径小于等于200mm的活塞环.第5部分:环槽 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Ring grooves |
BS 5341-6.1-1992 | 往复式内燃机直径小于等于200mm的活塞环.第6部分:术语、检验方法和通用规范.第1集;术语 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Vocabulary, inspection methods and generic specifications - Vocabulary |
BS 5341-7.3.1-1992 | 往复式内燃机直径小于等于200mm的活塞环.第7部分:单片环的设计、尺寸和命名.第3节:楔表面和半楔表面压缩环. | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Keystone and half keystone compression rings - Specification for keystone rings |
BS 5341-7.4-1992 | 往复式内燃机直径小于等于200mm的活塞环.第7部分:单片环设计、尺寸和命名.第4节:控油环规范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Specification for oil control rings |
BS 5341-8.1-1992 | 往复式内燃机直径小于等于200mm的活塞环.第8部分:多片组合式控油环设计、尺寸和命名.第1节:盘簧加压控油环 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for multi-piece oil control rings - Specification for coil-spring-loaded oil control rings |
BS DD 208-1992 | 往复式内燃机用的直径为200mm及其以下的活塞环:窄环宽度的矩形截面活塞环的规范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for rectangular rings with narrow ring width |
BS DD 209-1992 | 往复式内燃机用的直径为200mm及其以下的活塞环:半梯形活塞环规范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for half keystone rings |
BS HC 402-1976 | 铸铁圆筒规范(离心铸造)(适用于直径小于和等于200mm的活塞环) | Specification for cast iron ring pots (centrifugally cast) (suitable for piston rings up to 200 mm in diameter) |
BS HC 403-1976 | 高铬合金铸件铁环形坩埚规范(离心铸造)(适用于直径达400mm的活塞环) | Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter) |
BS HC 404-1976 | 铬-钼合金铸件铁环形坩埚(适用于离心铸造和砂型铸造密封环、活塞环和汽缸套筒) | Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners) |
BS ISO 6195-2002 | 流体传动系统和元件.缸筒.往复用活塞杆刮油涨圈.尺寸和公差 | Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances |
BS ISO 6621-2-2004 | 内燃机.活塞环.检验测量规则 | Internal combustion engines - Piston rings - Inspection measuring principles |
BS ISO 6621-4-2003 | 内燃机.活塞环.一般规范 | Internal combustion engines - Piston rings - General specifications |
BS ISO 6621-5-2006 | 内燃机.活塞环.质量要求 | Internal combustion engines - Piston rings - Quality requirements |
BS ISO 6622-1-2003 | 内燃机.活塞环.铸铁制矩形环 | Internal combustion engines - Piston rings - Rectangular rings made of cast iron |
BS ISO 6622-2-2003 | 内燃机.活塞环.钢制矩形环 | Internal combustion engines - Piston rings - Rectangular rings made of steel |
BS ISO 6623-2004 | 内燃机.活塞环.铸铁制刮环 I | nternal combustion engines - Piston rings - Scraper rings made of cast iron |
BS ISO 6624-2-2003 | 内燃机.活塞环.铸铁制半梯形环 | Internal combustion engines - Piston rings - Half keystone rings made of cast iron |
BS ISO 6624-4-2003 | 内燃机.活塞环.钢制半梯形环 | Internal combustion engines - Piston rings - Half keystone rings made of steel |
BS ISO 7425-2-2002 | 液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞杆密封汽缸 | Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings |
DD 208-1992 | 往复式内燃机用最大直径为200mm的活塞环:带有窄环宽度的矩形截面活塞环规范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for rectangular rings with narrow ring width |
DD 209-1992 | 往复式内燃机用最大直径为200mm的活塞环:半梯形截面活塞环规范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for half keystone rings |
DIN 34110-1991 | 一般公称用活塞环.公称直径为10至1200mm的 R 型环、普通压紧环 | Piston rings for general engineering; R-rings, plain compression rings, 10 up to 1200 mm nominal diameter |
DIN 70907-1991 | 活塞环.质量特性试验.术语和测量程序.DIN ISO 6621 T.2的补充 | Piston rings; test of quality characteristics; terms, measuring procedures; supplement to DIN ISO 6621 Part 2 |
DIN 70908-1991 | 活塞环.质量要求.可视特性和标记.DIN ISO 6621 T.5的补充 | Piston rings; quality requirements; visible characteristics, marking; supplement to DIN ISO 6621 Part 5 |
DIN 8533-1970 | 气动工具.活塞杆用冲击头、锥头 | Pneumatic tools, rammer butts, cones for piston-rods |
DIN ISO 3320-2001 | 液压系统和元件.缸径和活塞杆直径.米制系列 | Fluid power systems and components - Cylinder bores and piston rod diameter - Metric series (ISO 3320:1987) |
DIN ISO 4395-1985 | 液压传动系统和元件.汽缸.活塞杆螺纹尺寸和型式.等同采用ISO 4395-1985版本 | Fluid power systems and components; cylinders; piston rod thread dimensions and types; identical with ISO 4395, edition 1978 |
DIN ISO 5597-1988 | 液压流体动力.液压缸.往复作用的活塞和活塞杆的密封腔.尺寸和公差 | Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances; identical with ISO 5597:1987 |
DIN ISO 6621-1-1990 | 内燃机.活塞环.第1部分:词汇 | Internal combustion engines; piston rings; vocabulary; identical with ISO 6621-1:1986 |
DIN ISO 6621-2-1990 | 内燃机.活塞环.第2部分:检验测量原则 | Internal combustion engines; piston rings; inspection measuring principles; identical with ISO 6621-2:1984 |
DIN ISO 6621-3-1990 | 内燃机.活塞环.第3部分:材料规范 | Internal combustion engines; piston rings; material specifications; identical with ISO 6621-3:1983 |
DIN ISO 6621-4-1990 | 内燃机.活塞环.第4部分:一般规范 | Internal combustion engines; piston rings; general specifications; identical with ISO 6621-4:1988 |
DIN ISO 6621-5-1990 | 内燃机.活塞环.第5部分:质量要求 | Internal combustion engines; piston rings; quality requirements; identical with ISO 6621-5:1988 |
DIN ISO 6622-1-1990 | 内燃机.活塞环.第1部分:矩形截面环 | Internal combustion engines; piston rings; rectangular rings; identical with ISO 6622-1:1986 |
DIN ISO 6623-1990 | 内燃机.活塞环.刮油环 | Internal combustion engines; piston rings; scraper rings; identical with ISO 6623:1986 |
DIN ISO 6624-1-1990 | 内燃机.活塞环.第1部分:梯形截面环 | Internal combustion engines; piston rings; keystone rings; identical with ISO 6624-1:1986 |
DIN ISO 6625-1990 | 内燃机.活塞环.护油环 | Internal combustion engines; piston rings; oil control rings; identical with ISO 6625:1986 |
DIN ISO 6626-1990 | 内燃机.活塞环.螺旋弹簧承载油控制环 | Internal combustion engines; piston rings; coil-spring-loaded oil control rings; identical with ISO 6626:1989 |
DIN ISO 7181-2001 | 液压系统和元件.作动筒.缸筒和活塞杆截面比 | Hydraulic power systems and components - Cylinders - Bore and rod area ratios (ISO 7181:1991) |
DIN ISO 7425-2-1990 | 液压传动.弹性体赋能塑料面密封沟槽.尺寸和公差.第2部分:活塞杆密封沟槽 | Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989 |
DIN ISO 8140-1991 | 气动流体动力.10巴(1000kPa)系列气缸.活塞杆U形夹.安装尺寸 | Pneumatic fluid power; cylinders, 10 bar series; rod end clevis; mounting dimensions; identical with ISO 8140:1986 |
GB/T 14036-1993 | 液压缸活塞杆端带关节轴承耳环安装尺寸 | Hydraulic fluid power--Cylinders--Rod end spherical eyes--Mounting dimensions |
GB/T 14042-1993 | 液压缸活塞杆端柱销式耳环安装尺寸 | Hydraulic fluid power--Cylinders--Rodend plain eyes--Mounting dimensions |
GB/T 14223-1993 | 内燃机活塞环梯形环和楔形环 | Internal combustion engines--Piston rings--Keystone rings and half keystone rings |
GB/T 15242.1-1994 | 液压缸活塞和活塞杆动密封装置用同轴密封件尺寸系列和公差 | Hydraulic fluidpower--Cylinder rod and piston seals for reciprocating applications of co-axial seals--Dimensions and tolerances |
GB/T 15242.2-1994 | 液压缸活塞和活塞杆动密封装置用支承环尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of bearing rings--Dimensions and tolerances |
GB/T 15242.3-1994 | 液压缸活塞和活塞杆动密封装置用同轴密封件安装沟槽尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of Co-axial seals--Dimensions and tolerances of housings |
GB/T 15242.4-1994 | 液压缸活塞和活塞杆动密封装置用支承环安装沟槽尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of bearing rings--Dimensions and tolerances of housings |
GB/T 2350-1980 | 液压气动系统及元件活塞杆螺纹型式和尺寸系列 | Fluid power systems and components--Cylinders--Piston rod thread dimensions and types |
GB/T 2879-2005 | 液压缸活塞和活塞杆动密封沟槽尺寸和公差(1986年版) | Hydraulic fluid power-Cylinders-Housings for piston and rod seals in reciprocating applications-Dimensions and tolerances |
GB/T 2880-1981 | 液压缸活塞和活塞杆窄断面动密封沟槽尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions andtolerances of housings--Narrow section series |
GB/T 6577-1986 | 液压缸活塞杆带支承环密封沟槽型式、尺寸和公差 | Hydraulic fluid power--Cylinders--Piston seal housings incorporating bearing rings--Dimensions and tolerances |
GB/T 6578-1986 | 液压缸活塞杆用防尘圈沟槽型式、尺寸和公差 | Hydraulic fluid power--Cylinders--Reciprocating--Housings for rod wipers--Dimensions and tolerances |
ISO 3320-1987 | 流体传动系统和元件 缸内径和活塞杆直径 米制系列 | Fluid power systems and components; Cylinder bores and piston rod diameters; Metric series |
ISO 3321-1975 | 流体传动系统和元件 缸内径和活塞杆直径 英制系列 | Fluid power systems and components; Cylinder bores and piston rod diameters; Inch series |
ISO 4395-1978 | 流体传动系统和元件 缸筒 活塞杆螺纹尺寸和型式 | Fluid power systems and components; Cylinders; Piston rod thread dimensions and types |
ISO 5597-1987 | 液压传动 缸筒 往复用活塞和活塞杆密封沟槽 尺寸和公差 | Hydraulic fluid power; Cylinders; Housings for piston and rod seals in reciprocating applications; Dimensions and tolerances |
ISO 6195-2002 | 流体动力系统和元件.往复作用的活塞杆刮垢环罩.尺寸和公差 | Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances |
ISO 6621-1-1986 | 内燃机 活塞环 第1部分:词汇 | Internal combustion engines; Piston rings; Part 1 : Vocabulary |
ISO 6621-2-2003 | 内燃机.活塞环.第2部分:检验测量规则 | Internal combustion engines - Piston rings - Part 2: Inspection measuring principles |
ISO 6621-3-2000 | 内燃机 活塞环 第3部分:技术规范 | Internal combustion engines - Piston rings - Part 3: Material specifications (Revision of ISO 6621-3:1983) |
ISO 6621-4-2003 | 内燃机.活塞环.第4部分:一般规范 | Internal combustion engines - Piston rings - Part 4: General specifications |
ISO 6621-5-2005 | 内燃机.活塞环.第5部分:质量要求 | Internal combustion engines - Piston rings - Part 5: Quality requirements |
ISO 6622-1-2003 | 内燃机.活塞环.第1部分:矩形铸铁环 | Internal combustion engines - Piston rings - Part 1: Rectangular rings made of cast iron |
ISO 6622-2-2003 | 内燃机.活塞环.第2部分:矩形钢环 | Internal combustion engines - Piston rings - Part 2: Rectangular rings made of steel |
ISO 6623-2004 | 内燃机.活塞环.铸铁刮环 | Internal combustion engines - Piston rings - Scraper rings made of cast iron |
ISO 6624-1-2001 | 内燃机 活塞环 第1部分:铸铁梯形环 | Internal combustion engines - Piston rings - Part 1: Keystone rings made of cast iron |
ISO 6624-2-2003 | 内燃机.活塞环.第2部分:半梯形铸铁环 | Internal combustion engines - Piston rings - Part 2: Half keystone rings made of cast iron |
ISO 6624-3-2001 | 内燃机 活塞环 第3部分:钢制梯形环 | Internal combustion engines - Piston rings - Part 3: Keystone rings made of steel |
ISO 6624-4-2003 | 内燃机.活塞环.第4部分:半梯形钢环 | Internal combustion engines - Piston rings - Part 4: Half keystone rings made of steel |
ISO 6625-1986 | 内燃机 活塞环 油环 | Internal combustion engines; Piston rings; Oil control rings |
ISO 6626-1989 | 内燃机.活塞环.螺旋撑簧油环 | Internal combustion engines; piston rings; coil-spring-loaded oil control rings |
ISO 6626-2-2003 | 内燃机.活塞环.第2部分:窄铸铁环带的螺旋撑簧油环 | Internal combustion engines - Piston rings -- Part 2 Coil-spring-loaded oil control rings of narrow width made of cast iron |
ISO 6627-2000 | 内燃机 活塞环 涨簧/组合控油环 | Internal combustion engines - Piston rings - Expander/segment oil-control rings |
ISO 7181-1991 | 液压传动 缸筒 活塞和活塞杆面积比 | Hydraulic fluid power; cylinders; bore and rod area ratios |
ISO 7425-2-1989 | 液压传动 弹性体赋能塑料面密封沟槽 尺寸和公差 第2部分:活塞杆密封沟槽 | Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 2: rod seal housings |
JB/T 10628-2006 | 内燃机 活塞环 矩形钢环 | Internal combustion engines-Piston rings-Steel rectangular rings |
JB/T 5123-1991 | SG1 系列双作用单活塞杆液压缸 | () |
JB/T 5447-1991 | 往复活塞压缩机铸铁活塞环 | () |
JB/T 6016-1992 | 内燃机单体铸造活塞环 金相检验 | () |
JB/T 6290-2007 | 内燃机 筒体铸造活塞环 金相检验 | Internal combustion engines-Sleeve cast piston rings-Metallographic inspections |
JB/T 6724-1993 | 内燃机球墨铸铁活塞环 金相检验 | () |
JB/T 7939-1999 | 单活塞杆液压缸两腔面积比 | () |
JB/T 9745-1999 | 内燃机 硼铸铁单体铸造活塞环 金相检验 | () |
JB/T 9758-2004 | 气缸套、活塞环快速模拟磨损 试验方法 | () |
JIS B8032-1-1998 | 内燃机.小直径活塞环.第1部分:词汇 内燃機関 ― 小径ピストンリング ― 第1部:用語 | Internal combustion engines -- Small diameter piston rings -- Part 1: Vocabulary |
JIS B8032-2-1998 | 内燃机.小直径活塞环.第2部分:检验测量原则 内燃機関 ― 小径ピストンリング ― 第2部:測定方法 | Internal combustion engines -- Small diameter piston rings -- Part 2: Inspection measuring principles |
JIS B8032-3-1998 | 内燃机.小直径活塞环.第3部分:材料规范 内燃機関 ― 小径ピストンリング ― 第3部:材料 | Internal combustion engines -- Small diameter piston rings -- Part 3: Material specifications |
JIS B8032-4-1998 | 内燃机.小直径活塞环.第4部分:一般规范 内燃機関 ― 小径ピストンリング ― 第4部:仕様の一般規定 | Internal combustion engines -- Small diameter piston rings -- Part 4: General specifications |
JIS B8032-5-1998 | 内燃机.小直径活塞环.第5部分:质量要求 内燃機関 ― 小径ピストンリング ― 第5部:要求品質 | Internal combustion engines -- Small diameter piston rings -- Part 5: Quality requirements |
JIS B8032-6-1998 | 内燃机.小直径活塞环.第6部分:矩形环 内燃機関 ― 小径ピストンリング ― 第6部:レクタンギュラリング | Internal combustion engines -- Small diameter piston rings -- Part 6: Rectangular rings |
JIS B8032-7-1998 | 内燃机.小直径活塞环.第7部分:带窄环宽度的矩形环 内燃機関 ― 小径ピストンリング ― 第7部:薄幅レクタンギュラリング | Internal combustion engines -- Small diameter piston rings -- Part 7: Rectangular rings with narrow ring width |
JIS B8032-8-1998 | 内燃机.小直径活塞环.第8部分:刮油环 内燃機関 ― 小径ピストンリング ― 第8部:スクレーパリング | Internal combustion engines -- Small diameter piston rings -- Part 8: Scraper rings |
JIS B8032-9-1998 | 内燃机.小直径活塞环.第9部分:楔形环 内燃機関 ― 小径ピストンリング ― 第9部:キーストンリング | Internal combustion engines -- Small diameter piston rings -- Part 9: Keystone rings |
JIS B8032-10-1998 | 内燃机.小直径活塞环.第10部分:半楔形环 内燃機関 ― 小径ピストンリング ― 第10部:ハーフキーストンリング | Internal combustion engines -- Small diameter piston rings -- Part 10: Half keystone rings |
JIS B8032-11-1998 | 内燃机.小直径活塞环.第11部分:油控环 内燃機関 ― 小径ピストンリング ― 第11部:オイルコントロールリング | Internal combustion engines -- Small diameter piston rings -- Part 11: Oil control rings |
JIS B8032-12-1998 | 内燃机.小直径活塞环.第12部分:盘簧加载油控环 内燃機関 ― 小径ピストンリング ― 第12部:コイルエキスパンダ付きオイルコントロールリング | Internal combustion engines -- Small diameter piston rings -- Part 12: Coil-spring-loaded oil control rings |
JIS B8032-13-1998 | 内燃机.小直径活塞环.第13部分:扩展器/扇形体油控环 内燃機関 ― 小径ピストンリング ― 第13部:スチール組合せオイルコントロールリング | Internal combustion engines -- Small diameter piston rings -- Part 13: Expander/segment oil control rings |
JIS B8037-1-1998 | 内燃机.大直径活塞环.第1部分:词汇 内燃機関 ― 大径ピストンリング ― 第1部:用語 | Internal combustion engines -- Large diameter piston rings -- Part 1: Vocabulary |
JIS B8037-2-1998 | 内燃机.大直径活塞环.第2部分:检验测量原则 内燃機関 ― 大径ピストンリング ― 第2部:測定方法 | Internal combustion engines -- Large diameter piston rings -- Part 2: Inspection measuring principles |
JIS B8037-3-1998 | 内燃机.大直径活塞环.第3部分:材料规范 内燃機関 ― 大径ピストンリング ― 第3部:材料 | Internal combustion engines -- Large diameter piston rings -- Part 3: Material specifications |
JIS B8037-4-1998 | 内燃机.大直径活塞环.第4部分:一般规范 内燃機関 ― 大径ピストンリング ― 第4部:仕様の一般規定 | Internal combustion engines -- Large diameter piston rings -- Part 4: General specifications |
JIS B8037-5-1998 | 内燃机.大直径活塞环.第5部分:质量要求 内燃機関 ― 大径ピストンリング ― 第5部:要求品質 | Internal combustion engines -- Large diameter piston rings -- Part 5: Quality requirements |
JIS B8037-6-1998 | 内燃机.大直径活塞环.第6部分:矩形环 内燃機関 ― 大径ピストンリング ― 第6部:レクタンギュラリング | Internal combustion engines -- Large diameter piston rings -- Part 6: Rectangular rings |
JIS B8037-7-1998 | 内燃机.大直径活塞环.第7部分:油控环 内燃機関 ― 大径ピストンリング ― 第7部:オイルコントロールリング | Internal combustion engines -- Large diameter piston rings -- Part 7: Oil control rings |
JIS B8037-8-1998 | 内燃机.大直径活塞环.第8部分:盘簧加载油控环 内燃機関 ― 大径ピストンリング ― 第8部:コイルエキスパンダ付きオイルコントロールリング | Internal combustion engines -- Large diameter piston rings -- Part 8: Coil-spring-loaded oil control rings |
JIS B8038-1998 | 往复式液压气缸用活塞环 往復動油圧シリンダ用ピストンリング | Piston rings for reciprocating hydraulic cylinders |
JIS B8366-1-2000 | 流体动力系统和元件.液压缸.元件和识别代码.第1部分:缸径和活塞杆直径.米制系列 油圧・空気圧システム及び機器 ― シリンダ ― 構成要素及び識別記号 ― 第1部:シリンダ内径及びピストンロッド径 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters -- Metric series |
JIS B8366-4-2000 | 流体动力系统和元件.液压缸.元件和识别码.第4部分:活塞杆螺纹尺寸和类型 油圧・空気圧システム及び機器 ― シリンダ ― 構成要素及び識別記号 ― 第4部:ピストンロッド先端ねじ寸法及び形状 | Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 4: Piston rod thread dimension and types |
JIS B8395-2000 | 流体动力系统和元件.气缸.往复运功用的活塞杆刮垢器环的外套.尺寸和公差 油圧・空気圧システム及び機器 ― シリンダ ― 往復動用ワイパリングのハウジング ― 寸法及び許容差 | Fluid power systems and components -- Cylinders -- Housings for rod wiper rings in reciprocating applications -- Dimensions and tolerances |
JIS B8396-2000 | 流体动力系统和元件.气缸.往复运功用的活塞和活塞杆密封件的外套.尺寸和公差 油圧 ― シリンダ ― 往復動用ピストン及びロッドシールのハウジング ― 寸法及び許容差 | Hydraulic fluid power -- Cylinders -- Housings for piston and rod seals in reciprocating applications -- Dimensions and tolerances |
MT/T 472-1996 | 悬臂式掘进机 液压缸内径活塞杆及销轴直径系列 | () |
NF E48-019-2003 | 流体动力系统和元件.油缸内径和活塞杆直径.米制系列 | (Fluid power systems and components - Cylinder bores and piston rod diameters - Metric series.) |
NF E48-034-1990 | 液压传动.液压缸.小摩擦力活塞杆的密封壳.尺寸 | (Hydraulic fluid power. Cylinders. Seal housing for low-friction rods. Dimensions.) |
NF E48-036-1984 | 液压传动.千斤顶.铸铁活塞环和活塞室公差和尺寸 | (HYDRAULIC FLUID POWER. CYLINDER. DIMENSIONS AND TOLERANCES OF CAST IRON PISTON RINGS AND OF THEIR HOUSINGS.) |
NF E48-052-1992 | 液压传动.液压缸.缸筒和活塞杆截面比 | (Hydraulic fluid power. Cylinders. Bore and rod area ratios.) |
NF E48-060-1992 | 液压和气压传动.千斤顶.活塞杆的端头.螺纹:尺寸和类型 | (Fluid power. Cylinders. Piston rod thread dimensions and types.) |
NF E48-503-1987 | 液压传动.千斤顶.160bar小型A千斤顶活塞杆端头的球头销定 | (HYDRAULIC FLUID POWER. CYLINDER. ROD END SPHERICAL EYE FOR 160 BAR SINGLE-ROD CYLINDER,COMPACT SERIE A.) |
NF E49-001-1992 | 液压动力.8bar巴单和双端带活塞杆气缸.孔径为25mm-200mm.安装尺寸的互换性 | (Pneumatic fluid power. 8 bar single and double-ended piston rod cylinders. Bores from 25 mm up to 200 mm. Interchangeability and mounting dimensions.) |
NF E49-003-1-1992 | 气压传动.10bar气缸.32mm-320mm缸筒.第1部分:单端带活塞杆气缸 | (PNEUMATIC FLUID POWER. CYLINDERS 10 BAR. BORE 32 MM TO 320 MM. INTERCHANGEABILITY DIMENSIONS. PART 1 : SINGLE-ENDED PISTON ROD CYLINDER.) |
NF E49-003-3-1993 | 气动液力传动.10bar气缸.互换性尺寸.第3部分:双头活塞杆气缸 | (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 3 : DOUBLE-ENDED PISTON ROD CYLINDER.) |
NF E49-003-4-1995 | 气动液力传动.10bar气缸.32mm-320mm缸筒.第4部分:活塞杆端部带统一互换销的气缸 | (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 4 : CYLINDER WITH ROD END WITH INTEGRATED PIN MOUNTING.) |
NF R11-207-1-1989 | 内燃机.活塞环.第1部分:词汇 | (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 1 : VOCABULARY.) |
NF R11-207-2-1989 | 内燃机.活塞环.第2部分:检测原理 | (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 2 : INSPECTION MEASURING PRINCIPLES.) |
NF R11-207-3-2002 | 内燃机.活塞环.第3部分:材料规范 | (Internal combustion engines - Piston rings - Part 3 : material specifications.) |
NF R11-207-4-1989 | 内燃机.活塞环.第4部分:总规范 | (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 4 : GENERAL SPECIFICATIONS.) |
NF R11-207-5-1989 | 内燃机.活塞环.第5部分:质量要求 | (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 5 : QUALITY REQUIREMENTS.) |
QC/T 284-1999(2005) | 汽车摩托车发动机球墨铸铁活塞环金相标准 | () |
QC/T 39-1992(2005) | 汽车摩托车发动机活塞环检测方法 | () |
QC/T 554-1999(2005) | 汽车、摩托车发动机 活塞环技术条件 | () |
QC/T 555-2000(2005) | 汽车、摩托车发动机 单体铸造活塞环金相标准 | () |
QC/T 737-2005 | 轿车发动机铸铁活塞环技术条件 | Specifications for cast-iron piston ring of passenger car engine |
prEN 4198-1998 | 航空航天系列 耐腐蚀钢杆、有自动润滑衬垫和螺纹柄的可调自对中普通轴承活塞杆端 尺寸和负荷 | Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads |
prEN 4351-1997 | 航空航天系列 耐腐蚀钢带自对中双排滚珠轴承和带螺纹柄的活塞杆端 尺寸和负荷 英制 | Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in corrosion resisting steel - Dimensions and loads - Inch series |
编号 | 中文名称 | 英文名称 |