世界船舶标准5

返回

序号编号中文名称英文名称
1 GB/T 14358-1993舰船饮用水净化器Drinking water purifier for naval ships
2ANSI/ASTM F1626-1995制定舰船火控制计划惯例Practice for Preparing Shipboard Fire Control Plans
3ANSI/ASTM F1370-1992舰船用水系统减压阀的规范Specification for Pressure-Reducing Valves for Water Systems, Shipboard
4DIN 81403-1978舰船用带形铰链Strap hinges for ships and boats
5DIN 6779-11-1998技术产品和技术产品文件结构原则.第11部分:舰船和航海技术Structuring principles for technical products and technical product documentation - Part 11: Ships and marine technology
6DIN 83407-1996舰船设备用锁和压叉板Closing devices (fasteners) and fork plates for ship's equipment
7DIN 81860-2-1999舰船上的锚链钢缆端部紧固装置.第2部分:部件End fastenings for anchor chain cables on board ships - Part 2: Components
8DIN 86127-2000舰船用压缩式接头.米制螺纹24级接头.技术规范Compression fittings for shipboard use - 24 fittings with metric thread - Technical specification
9 GB/T 8843-2002工程船术语Terminology of working ship
10 GB/T 7391-2002海洋调查船术语Terminology of oceanographic research ships
11 GB/T 3594-1983渔船电子设备电源的技术要求The technical requirements of power supplies for electronic equipments of fish boats
12 GB/T 12918-1991油船排油监控系统技术条件Specification for oil discharge monitoring and control systems for oil tankers
13GB 18434-2001油船油码头安全作业规程Safety operation rules for oil tankers and terminals
14SY 6430-1999浅海石油船舶吊装作业安全规程()
15NF M88-050-1983石油工业.油船和驳船容量测量鉴定牌(Petroleum industry. Calibration identification plate for tank boats and tank barges.)
16NF M88-262-1978道路罐车.油罐车.油船.非冷冻液态烃的运输.橡胶软管(ROAD TANKERS. TANK WAGONS. TANKERS. TRANSFER OF NON-REFRIGERATED LIQUEFIED HYDROCARBONS. RUBBER HOSE PIPES.)
17 GB/T 17872-1999江海直达货船船型系列Ship form series of river/coastal cargo ship
18GB/T 18181-2000三峡枢纽过坝货船(队)尺度系列Dimensions series of cargo carrier(train)passing the lock of Three Gorges Dam
19 GB/T 16890.6-1997水路客运服务质量要求游览船Requirements on services of passenger transport by water--Sightseeing cruise ships
20 GB/T 16890.2-1997水路客运服务质量要求沿海、长江干线客船Requirements on services of passenger transport by water--Passenger ships sailing in coastal waters and the main routes of the Yangtze river
21GB/T 16890.3-1997水路客运服务质量要求远洋、涉外游览客船Requirements on services of passenger transport by water--Passenger ships sailing in ocean and for overseas visitors
22GB/T 16890.4-1997水路客运服务质量要求内河客船Requirements on services of passenger transport by water--Passenger ships sailing in inland waters
23GB/T 16890.5-1997水路客运服务质量要求高速客船Requirements on services of passenger transport by water--High speed passenger ships
24GB/T 20132-2006船舶与海上技术 客船低位照明 布置Ships and marine technology -- Low-location lighting on passenger ships -- Arrangement
25EN 14206-2003内航船只 客船舷梯 要求、试验Inland navigation vessels - Gangways for passenger vessels - Requirements, tests
26ANSI/ASTM F916-1985机电客船电梯和储藏室规范Specification for Elevators, Shipboard, Electromechanical Passenger, and Stores
27BS MA 40-1-1975船舶护栏、立柱等规范.第1部分:商船(客船除外)护栏Specification for marine guardrails, stanchions, etc - Guardrails for merchant ships (excluding passenger ships)
28BS MA 40-2-1975船舶护栏、立柱等规范.第2部分:商船(客船除外)门及可移动的护栏Specification for marine guardrails, stanchions, etc - Gates and portable guardrail sections for merchant ships (excluding passenger ships)
29DIN 80002-1 Bb.5-1996船舶和航海技术.船舶总装图.客船实例(班轮)Ships and marine technology - General arrangement plans for ships - Example passenger vessel (ferries accordingly)
30DIN ISO 6954-2001机械振动.商船和客船适居住性的振动评定、报告和测量导则Mechanical vibration - Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships (ISO 6954:2000)
31GB/T 7452-2007机械振动 客船和商船适居性振动测量、报告和评价准则()
32 GB/T 15869-1995卫星通信船载地球站码分多址通信设备通用技术条件General specification of satellite communication earth station for shipborne communication equipment for CDMA
33 GB/T 15511-1995海洋船电气自动化系统一般要求General requirements for electrical automatic control systems of sea-going ships
34 GB/T 15731-1995内河旅游船星级的划分及评定Star-rating standard for cruise ships on inland river
35 GB/T 14655-1993滚装船与岸联接的基本规定General rules for Ro/Ro ship-to-shore connection
36NF R19-110-1-1994滚装船上海运用车辆捆绑和安全装置.一般要求.第1部分:商业用车和车辆组合,半挂车除外(欧洲标准EN29367-1)(Lashing and securing arrangements on road vehicles for sea transportation on ro/ro ships. General requirements. Part 1 : commercial vehicles and combinations of vehicles, semi-trailers excluded.)
37NF R19-110-2-1995滚装船上汽车捆绑和固定装置的一般要求.第2部分:半挂车(欧洲标准EN 29367-2)(Lashing and securing arrangements on road vehicles for sea transportation on ro/ro ships. General requirements. Part 2 : semi-trailers.)
38EN 29367-1-1993+AC-1994滚装船上道路车辆捆绑和固定装置 一般要求 第1部分:商用车辆和车辆列车 半挂车除外Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 1: commercial vehicles and combinations of vehicles, semi-trailers excluded (ISO 9367-1:1989)
39BS EN 29367-1-1991滚装船汽车捆绑和固定装置一般要求.第1部分:商业用车辆和车辆组合(半挂车除外).Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Commercial vehicles and combinations of vehicles, semi-trailers excluded
40BS EN 29367-2-1994滚装船汽车捆绑和固定装置一般要求.第2部分:半挂车Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Semi-trailers
41DIN EN 29367-2-1995滚装船舶海运用公路车辆的捆绑和固定装置.一般要求.第2部分:半挂车 (ISO 9367-2:1994); 德文版本 EN 29367-Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 2: Semi-trailers (ISO 9367-2:1994); German version EN 29367-2:1994
42DIN EN 29367-1-1994滚装船舶海运用公路车辆的捆绑和固定装置.一般要求.第1部分:商用车辆和车辆组合、半挂车除外 (ISO 9367-1:1Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (ISO 9367-1:1989); German version EN 29367-1:1993
43ISO 6812-1983滚装船与岸的连接 岸端与带艉/艏跳板的船舶之间的连接Roll on/Roll off ship-to-shore connection; Interface between terminals and ships with straight stern/bow ramps
44ISO 9367-1-1989滚装船上道路车辆捆绑和固定装置 一般要求 第1部分:商用车辆和车辆列车(半挂车除外)Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 1: commercial vehicles and combinations of vehicles, semi-trailers excluded
45ISO 9367-2-1994滚装船上道路车辆捆绑和固定装置 一般要求 第2部分:半挂车Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 2: semi-trailers
46 GB/T 14205-1993玻璃纤维增强塑料养殖船Cultivating boat of glass fiber reinforced plastics
47 GB/T 13146-1991气垫船术语Terminology for air cushion vehicle
48 GB/T 12303-1990海船声号器具的声压级测量Measurement of sound pressure level for soundsignal appliances by seagoing vessel
49GB 16557-1996海船救生安全标志Safety signs for life-saving on sea-going ship
50GB/T 3471-1995海船系泊及航行试验通则General provisions for programming mooring and sea trials of sea going ships
51GB/T 4447-1992海船用起锚机和起锚绞盘Sea-going vessels--Windlasses and anchor capstans
52NF J60-010-1996小型船舶.海船推进发动机和装置.动力测量和说明(Small craft. Marine propulsion engines and systems. Power measurements and declarations.)
53NF J38-120-1994造船.海船用陀罗仪器(SHIPBUILDING. MARINE GYRO-COMPASSES. (EUROPEAN STANDARD EN ISO 8728).)
54UL 1309-1995海船电缆(Marine shipboard cable )
55ASTM F 1337-1991海船和海洋系统、设备用人体工效要求Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities
56ANSI/ASTM F906-1985海船用字母和数字规范Specification for Letters and Numerals for Ships
57ANSI/ASTM F1337-1997海船和海洋系统、设备用人体工效要求惯例Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities
58ANSI/UL 1598A-2005海船装置用灯具的安全标准Standard for Safety for Luminaires for Installation on Marine Vessels
59ASTM E 1123-1986海军和航海船舶舱壁处理材料的声传输损失试验用试样的安装Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
60BS EN 1914-1997内河航海船舶.驳船上的小船Inland navigation vessels - Ship's boats
61BS EN ISO 19019-2005海船和海上技术.海上试航的计划、实施和报告说明Sea-going vessels and marine technology - Instructions for planning, carrying out and reporting sea trials
62DIN EN ISO 19019-2005海船和航海技术.海上试航计划、实施和报告的说明Sea-going vessels and marine technology - Instructions for planning, carrying out and reporting sea trials (ISO 19019:2005); German version EN ISO 19019:2005
63ISO 4568-1986造船 海船 起锚机和起锚绞盘Shipbuilding; Sea-going vessels; Windlasses and anchor capstans
64ISO 7061-1993造船 海船用铝质舷梯Shipbuilding; aluminium shore gangways for seagoing vessels
65ISO 19019-2005海船和海上技术.海上试航的计划、实施和报告说明Sea-going vessels and marine technology - Instructions for planning, carrying out and reporting sea trials
66ISO 8665-2006小型船舶.海船推进往复式内燃机.动力测量和说明Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations
67 GB/T 11700-2003小艇船用推进发动机和推进装置功率的测定和标定Small craft--Marine propulsion engines and systems--Power measurements and declarations
68 GB/T 11699-2003舷内机小艇锥度为1∶10的螺旋桨轴端和桨毂Small craft with inboard engine--Propeller shaft ends and bosses with 1∶10 taper
69GB/T 12916-1991船用金属螺旋桨技术条件Specification for marine metallic propeller
70GB/T 19309-2003舷内机小艇锥度为1∶16的螺旋桨轴端和桨毂Small craft with inboard engine--Propeller shaft ends and bosses with 1∶16 taper
71GB/T 13411-1992船用可调螺距螺旋桨技术条件Technical requirements for marine controllable pitch propellers
72NF J65-505-2-2003船舶和海运技术.船用推进装置.第2部分:可变桨矩的螺旋桨装置词汇(Ships and marine technology - Propulsion plants for ships - Part 2 : vocabulary for controllable-pitch propeller plants.)
73NF L87-121-1966螺旋桨.互换性(PROPELLER HUBS. INTERCHANGEABILITY CHARACTERISTICS.)
74NF J65-120-1958造船工业.轴线.螺旋桨螺母制动原则(SHIPBUILDING. SHAFT LINES. PRINCIPLES FOR LOCKING OF PROPELLER NUTS.)
75NF J65-113-1958造船工业.轴线.螺旋桨用圆螺母(SHIPBUILDING. SHAFT LINES. GROOVED PROPELLER NUTS.)
76NF J65-115-1958造船工业.轴线.螺旋桨用螺母盖(SHIPBUILDING. SHAFT LINES. COMBINED NUTS AND SPINNERS.)
77NF L87-110-1966普通螺旋桨轴.组装和标称尺寸(PLAIN PROPELLER SHAFT. ASSEMBLY AND NOMINAL DIMENSIONS.)
78NF J65-109-1958造船工业.轴线.螺旋桨用带座螺母(SHIPBUILDING. SHAFT LINES. COLLAR NUTS FOR PROPELLERS.)
79NF J65-125-1958造船工业.轴线.螺旋桨轴套前端的油封(SHIPBUILDING. SHAFT LINES. FORWARD GLANDS FOR PROPELLER HUPS.)
80NF J65-111-1958造船工业.轴线.螺旋桨用普通螺母和带四个榫头的罩形螺母(SHIPBUILDING. SHAFT LINES. ORDINARY AND CAP PROPELLER NUTS WITH 4 LUGS.)
81NF L87-120-1966普通螺旋桨轴.互换性(PLAIN PROPELLER SHAFT. INTERCHANGEABILITY CHARACTERISTICS.)
82NF L87-123-1955螺旋桨.尾锥(PROPELLER HUBS. REAR CONES.)
83NF L87-125-1955螺旋桨.紧固螺母(PROPELLER HUBS. LOCKNUTS.)
84NF J65-505-1967造船工业.内河航行.船用螺旋桨.定义(SHIPBUILDING. INLAND NAVIGATION. SHIPS SCREW PROPELLERS. DEFINITIONS.)
85NF L87-122-1955螺旋桨.头锥(PROPELLER HUBS. FRONT CONES.)
86QB/T 1069-1991螺旋桨搅拌机()
87HG/T 3796.9-2005板式螺旋桨搅拌器()
88ISO 484-1-1981造船 船用螺旋桨 制造公差 第1部分:螺旋桨直径>2.5mShipbuilding; Ship screw propellers; Manufacturing tolerances; Part 1 : Propellers of diameter greater than 2,50 m
89ISO 484-2-1981造船 船用螺旋桨 制造公差 第2部分:螺旋桨直径0.80m~2.50m(包括2.50m)Shipbuilding; Ship screw propellers; Manufacturing tolerances; Part 2 : Propellers of diameter between 0,80 and 2,50 m inclusive
90ANSI/ASHRAE 87.3P-2001螺旋桨通风机风扇振动试验方法.诊断试验方法Method of Testing Propeller Fan Vibration - Diagnostic Test Methods
91ANSI/ASHRAE 87.2-2002检测螺旋桨式风机可靠性的现场试验法In-Situ Method of Testing Propeller Fans for Reliability
92ASTM D 5096-2002测定杯形风速计或螺旋桨风速计性能的标准试验方法Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
93 BS MA 86-1979船舶制造用术语词汇.船舶用螺旋桨对等术语词汇表Glossary of terms used in shipbuilding: list of equivalent terms for ship screw propellers
94BS 7161-1990内列发动机船舶的螺旋浆轴端和螺旋桨毂规范Specification for propeller shaft ends and bosses for inboard-engined pleasure craft
95BS EN ISO 3715-2-2001船舶和海上技术.船用推进装置.可变距螺旋桨设备词汇Ships and marine technology - Propulsion plants for ships - Vocabulary for controllable-pitch propeller plants
96ISO 8845 Technical Corrigendum 1-1995舷内机小艇 带1:16锥度的螺旋桨轴端和轴毂 技术勘误1Small craft with inboard engine - Propeller shaft ends and bosses with 1:16 taper; Technical Corrigendum 1
97ISO 3715-1978造船 船用螺旋桨 术语对照表 三种语言版Shipbuilding; Ship screw propellers; List of equivalent terms Trilingual edition
98ISO 3715 AMD 1-1986造船 船用螺旋桨 术语对照表 修改1 三种语言版Shipbuilding; ship screw propellers; list of equivalent terms; amendment 1
99ISO 8845-1994舷内机小艇 带1:16锥度的螺旋桨轴端和轴毂Small craft with inboard engine - Propeller shaft ends and bosses with 1:16 taper
100JIS W4606-1995飞行器涡轮轴和涡轮螺旋桨发动机通用规范General specification of turboshaft and turboprop engines for aircraft
101JIS F4804-1999船用小型螺旋桨的固定部件.锥度为1:16Fixing parts of ships' small propellers, Taper 1:16
102JIS F4803-1999造船.船用螺旋桨.制造公差.第2部分:直径在0.8至2.5M之间含0.8M、2.5M的螺旋桨Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 2: Propellers of diameter between 0.80 and 2.50 m inclusive
103JIS F4802-1999造船.船用螺旋桨.制造公差.第1部分:直径大于2.5M的螺旋桨Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 1: Propellers of diameter greater than 2.50 m
104JIS F4801-1999船用小型螺旋桨的固定部件.锥度1:10Fixing parts of ships' small propellers, Taper 1:1
序号编号中文名称英文名称

返回