| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 11024-1973 | 弹簧销 | Spring Cotters |
| DIN 15112-1979 | 弹簧拉力.安全要求和检验 | Spring pulls; safety requirements, testing |
| DIN 1571-1979 | 弹簧页扇的中央凹痕 | Central Dimples for Spring Leaves |
| DIN 18262-1969 | 防火门用可调节非承重弹簧铰链 | Adjustable Non-load-bearing Spring Hinge for Fire Protecting Doors |
| DIN 18263-1-1997 | 建筑五金.受控门锁.第1部分:用曲轴传动和螺旋弹簧的门锁 | Building hardware - Controlled door closing devices with hydraulic damping - Part 1: Surface(top) mounted door closer with crank drive and spiral spring (pot-type door closer) |
| DIN 18264-1978 | 建筑五金.单动门用弹簧门枢 | Building hardware; spring hinges for doors, single action |
| DIN 18265-1978 | 建筑五金.双动门用弹簧门枢 | Building hardware; spring hinges for doors, double action |
| DIN 18267 Berichtigung 1-2005 | 窗把手.弹簧锁和可锁窗把手.DIN 18267-2005的勘误 | Window handles - Clickable and lockable window handles, Corrigenda to DIN 18267:2005-01 |
| DIN 18267-2005 | 窗把手.弹簧锁和可锁窗把手 | Window handles - Clickable and lockable window handles |
| DIN 20553-1989 | 矿山车用带锥形滚柱轴承的车轮装置.不带弹簧 | Wheel sets with taper roller bearings for mine cars; without springs |
| DIN 20555-1989 | 矿山车用带锥形滚柱轴承的车轮装置.外部弹簧悬挂装置 | Wheel sets with taper roller bearings for mine cars; exterior spring suspension |
| DIN 20556-1989 | 矿山车用带锥形滚柱轴承的车轮装置.内部弹簧悬挂装置 | Wheel sets with taper roller bearings for mine cars; interior spring suspension |
| DIN 20579-1-1986 | 矿车用缓冲弹簧.第1部分:计算 | Buffer springs for mine cars; calculation |
| DIN 20579-2-1986 | 矿车用缓冲弹簧.第2部分:要求 | Buffer springs for mine cars; requirements |
| DIN 2090-1971 | 扁钢制螺旋压缩弹簧.计算 | Helical Compression Springs made of Flat Bar Steel; Calculation |
| DIN 2091-1981 | 圆截面扭杆弹簧.计算与设计 | Circular section torsion bar springs; Calculation and design |
| DIN 2092 Berichtigung 1-2007 | 盘形弹簧.DIN 2092-2006-03的计算、技术勘误 | Disc springs - Calculation, Corrigenda to DIN 2092:2006-03 |
| DIN 2092-2006 | 盘形弹簧.计算 | Disc springs - Calculation |
| DIN 2093 Berichtigung 1-2007 | 盘形弹簧.质量规范.尺寸.DIN 2093:2006-03的勘误 | Disc springs - Quality specifications - Dimensions, Corrigenda to DIN 2093:2006-03 |
| DIN 2093-2006 | 盘形弹簧.质量规范.尺寸 | Disc springs - Quality specifications - Dimensions |
| DIN 2095-1973 | 圆线材制圆柱形螺旋弹簧.冷绕制压缩弹簧的质量规范 | Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Compression Springs |
| DIN 2096-1-1981 | 圆线材及棒材制圆柱形螺旋压缩弹簧.热绕压缩弹簧的质量要求 | Helical compression springs made of round wire and rod; Quality requirements for hot formed compression springs |
| DIN 2097-1973 | 圆线材制圆柱形螺旋弹簧.冷绕制拉伸弹簧的质量规范 | Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Tension Springs |
| DIN 2098-1-1968 | 圆线材制螺旋弹簧.线材直径0.5MM以上的冷卷压力弹簧的尺寸 | Helical springs Made of Round Wire; Dimensions for Cold Coiled Compression Springs with Wire Diameter from 0.5 mm upwards |
| DIN 2098-2-1970 | 圆线材制螺旋弹簧.线材直径0.5MM以下的冷卷压力弹簧的尺寸 | Helical Springs Made of Round Wire; Dimensions for Cold-coiled compression springs of less than 0.5 mm Wire Diameter |
| DIN 2099-1-2003 | 圆丝材和棒材制螺旋式弹簧.第1部分:冷成形压缩弹簧所需的信息.打印表格A | Helical springs made of round wire and rod - Part 1: Information to be given in order to obtain the cold formed compression spring required; Printed form A |
| DIN 2099-2-2004 | 圆线材和棒材制螺旋弹簧.第2部分:获取所需的冷成型拉伸弹簧而给出的信息.印制格式B | Helical springs made of round wire and rod - Part 2: Information to be given in order to obtain the cold formed tension springs required, printed form B |
| DIN 2099-3-2004 | 圆线材及棒材制螺旋弹簧.第3部分:热成形压缩弹簧要求的信息.印样C | Helical springs made of round wire and rod - Part 3: Information to be given in order to obtain the hot formed compression spring required, printed form C |
| DIN 2194-2002 | 圆线和圆条制螺旋弹簧.冷缠扭力弹簧(蝶形弹簧).质量规范 | Helical springs made of round wire and rod - Cold coiled torsional springs (leg springs) - Quality specifications |
| DIN 267-26-2005 | 紧固件.技术规范.第26部分:螺栓连接件用锥形弹簧垫圈 | Fasteners - Technical specifications - Part 26: Conical spring washers for bolted connections |
| DIN 27204-4-2005 | 铁路车辆的性能.行走机构.第4部分:钢制弹簧 | State of railway vehicles - Running gear - Part 4: Steel springing |
| DIN 27204-6-2004 | 铁路车辆的安全.行走机构.第6部分:气体弹簧悬挂系统 | State of railway vehicles - Running gear - Part 6: Pneumatic suspension system |
| DIN 3019-1972 | 工业货车.推车和拖车车轴用梯形板弹簧 | Industrial trucks; trapezoidblock-springs for axles of handcarts and trailers |
| DIN 3021-1-1999 | 软管夹件.弹簧板夹件(FBS).第1部分:尺寸、标记、材料和类型 | Hose clamps - Spring band clamp - Part 1: Dimensions, marking, materials, types |
| DIN 3021-2-1999 | 软管夹子.弹簧带夹子.第2部分:交货技术条件 | Hose clamps - Spring band clamp - Part 2: Technical delivery conditions |
| DIN 3021-3-1999 | 软管夹子.弹簧带夹子.第3部分:系统: 弹簧带夹子-软管-插口 | Hose clamps - Spring band clamp - Part 3: System: Spring band clamp-hose-spigot |
| DIN 31216-2-1980 | 弹簧夹.单个零件和板 | Spring clamps; individual parts and plates |
| DIN 34016-1980 | 叠层弹簧.弹簧悬挂的弹簧连接垫圈支承板 | Laminated springs; spring link washer bearing plates for spring suspension |
| DIN 34818-2002 | 带攻丝螺纹的薄弹簧螺母 | Sheet spring nuts with tappping screw thread |
| DIN 37082-1975 | 制动踢片的调节装置.弹簧螺栓的压力弹簧. | Adjusting Equipment for Brake Blocks; Compression Springs, Spring Bolt |
| DIN 4000-11-1987 | 弹簧贷品特性的表格设计 | Tabular layouts of article characteristics for springs |
| DIN 4000-93-2006 | 产品特性表.第93部分:弹簧夹头、夹紧套管和单头卡套 | Tabular layouts of properties - Part 93: Collets, Clamping sleeves, Ferrules |
| DIN 41079-1974 | 电辅助时钟装置的发条机构和刻度盘的紧固.安装尺寸 | Fastening of clockworks an dials for electric secundary clocks; mounting dimensions |
| DIN 42013-1988 | 小型电动机的球轴承轴向调节用弹簧垫圈 | Spring washers for axial adjustment of ball bearings of small motors |
| DIN 43801-1-1976 | 电气测量仪器.第1部分:螺旋弹簧.尺寸 | Electrical measuring instruments; spiral springs; dimensions |
| DIN 4621-1995 | 叠板弹簧.校直弹簧夹 | Laminated leaf springs - Alignment clips |
| DIN 46238-1985 | 塑料绝缘通信软线的弹簧电缆终端 | Springterminals for plastic insulated telecommunication cords |
| DIN 46336-1987 | 弹簧接线端的插头盒 | Plugbox for springterminals |
| DIN 49999-2-1983 | 玻璃灯具.螺纹环和弹簧紧固用圆形孔的棱边.连接尺寸 | Glass luminaires; round hole edges for threaded ring and spring fastening; connection dimensions |
| DIN 5287-1972 | 单件制单钩弹簧钩 | Simplex hook spring hooks made of one piece |
| DIN 5289-1979 | 剪刀形弹簧保险钩 | Scissors snap |
| DIN 5290-1-1983 | 有锁紧螺母的轻金属弹簧钩.尺寸、要求、检验 | Snap hook from light metal; with setting nut; dimensions, requirements and testing |
| DIN 5290-2-1977 | 无定位螺母的轻金属弹簧箍.第2部分:尺寸、交货技术条件 | Light metal spring hook without setting nut; dimensions, technical conditions of delivery |
| DIN 5297-1-1979 | 第1部分:带固定矩形环的弹簧按扣 | Spring snap with fixed square eye |
| DIN 5297-2-1979 | 带固定圆环和椭圆环的弹簧锁钩 | Spring snap with fixed round eye and oval eye |
| DIN 5299-1980 | 半圆钢丝、圆钢丝及锻造的弹簧保险钩 | Snap hook half-round wire, round wire and forged |
| DIN 5543-1980 | 叠层弹簧.弹簧悬挂的弹簧连接垫圈和中间弹簧连接垫圈 | Laminated springs; spring link washers and intermediate spring link washers for spring suspension |
| DIN 58507-1994 | 精密绘图仪的弹簧弓式插脚圆规 | Spring bow compass with interchangeable points for precision drawing instruments (P) |
| DIN 58508-1994 | 精密绘图仪的弹簧弓式两脚规(P) | Spring-bow divider for precision drawing instruments (P) |
| DIN 58509-1994 | 精密绘图仪用带互换笔尖的圆心固定式弹簧圆规 | Fixed centre spring bow with interchangeable points for precision drawing instruments (P) |
| DIN 58516-1990 | 固定中心弹簧圆规的枢针 | Pivot needles for fixed center spring bow |
| DIN 58543-1987 | 学生用绘图仪器的弹簧分度规 | Spring bow divider for school drawing instruments |
| DIN 58544-1996 | 标准绘图仪定心弹簧圆规 | Drop bow for standard drawing instruments |
| DIN 58556-1987 | 带可互换零件的快速调整弹簧圆规铅笔和快速调整弹簧圆规组合件 | Quick setting bow pencil and quick setting bow combination with interchangeable parts |
| DIN 6310-2002 | 夹具用弹簧承载掣子 | Spring-loaded catch for jigs |
| DIN 6343-1993 | 固定长度的弹簧套夹 | Collets-dead length type |
| DIN 6796-1987 | 螺栓和螺母用螺旋弹簧垫圈 | Conical spring washers for bolt/nut assemblies |
| DIN 6900-5-2004 | 粗牙螺纹螺钉和垫圈组件.第5部分:带锥形弹簧垫圈 | Screw and washer assemblies with coarse thread - Part 5: With captive conical spring washer |
| DIN 6908-1995 | 螺钉和垫圈组件用锥形弹簧垫圈 | Conical spring washers for screw and washer assemblies |
| DIN 69882-6-2005 | 符合DIN 69893-1的带锥形空心柄的刀具夹具.第6部分:E型带8度安装角的弹簧夹头.尺寸 | Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E, clamping chuck for collets with 8° setting angle - Dimensions |
| DIN 71805-1990 | 角形铰链.球形承窝.开口弹簧卡环 | Angle joints; housings, circlips |
| DIN 81307-2003 | 船上折叠门带锁闩弹簧锁 | Rim-locks with latch-bolt for hinged doors on ships |
| DIN 81308-2003 | 船上折叠门无弹簧闩弹簧锁 | Rim-locks without latch-bolt for hinged doors on ships |
| DIN 81309-2003 | 船上厕所和浴室折叠门带弹簧闩的弹簧锁 | Rim-locks with latch-bolt for hinged doors of lavatory and bath on ships |
| DIN 81310-2003 | 船上推拉门带钩头弹簧闩的弹簧锁 | Rim-locks with hook latch-bolt for sliding doors on ships |
| DIN 81311-2005 | 船用重型铰链门的带碰簧销的弹簧锁 | Rim-locks with latch-bolt for heavy hinged doors on ships |
| DIN 81312-1987 | 重型铰链门用无簧锁的门缘弹簧锁 | Rim-locks without latch-bolt for heavy hinged doors |
| DIN 81409-1977 | 活板门用弹簧式定位器 | Spring type holders for trap-doors |
| DIN 8260-1987 | 手表的调节轴(发条轴).主要尺寸 | Setting stem (winding stem) for watches; main dimensions |
| DIN 8297-1971 | 手表的发条柄 | Winding buttons for wrist-watches |
| DIN 8328-3-1984 | 钟表的编号.电源、发条机构、摆振系统、保护措施和附加功能 | Numbering of watches and clocks; energy supply, winding mechanism, oscillating system, protective measures and additional functions |
| DIN 95361-1997 | 弹簧元件.条材 | Elastomer mounts - Bars |
| DIN 95362-1996 | 空心棱柱弹簧组件 | Elastomer mounts, hollow-prismatic |
| DIN 95365-1997 | 弹簧元件.槽轴承.A至K型 | Elastomer mounts - Hat mounts - Types A to K |
| DIN 95366-1996 | 橡胶-弹簧元件.带和不带保险的罐形轴承.A型至G型 | Elastomer mounts - Pot bearings and fail safe pot bearings, types A to G |
| DIN 95408-1999 | 弹簧元件.顶锻卡箍弹簧元件.J型 | Spring mounts - Trust stirrup mounts - Type J |
| DIN 9814-1981 | 弹簧冲空模板的中间立柱式冲压机 | Centre post press tool sets with spring stripper |
| DIN 9835-1 Bb.1-1987 | 冲压模具用弹性体压力弹簧.弹簧特性 | Elastomer pressure springs for press tools; spring characteristics |
| DIN 9835-3-1984 | 冲压模具用弹性体压力弹簧.检验和要求 | Elastomer pressure springs for press tools; testing and requirements |
| DIN EN 10089-2003 | 淬火和回火弹簧用热轧钢材.交货技术条件 | Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
| DIN EN 10092-1-2004 | 热轧弹簧扁钢棒材.第1部分:扁平棒材.尺寸及形状和尺寸公差 | Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions; German version EN 10092-1:2003 |
| DIN EN 10092-2-2004 | 热轧弹簧钢扁平棒材.第2部分:有肋和有槽的簧片.尺寸及形状和尺寸公差 | Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves, Dimensions and tolerances on shape and dimensions; German version EN 10092-2:2003 |
| DIN EN 10132-4-2003 | 热处理用冷轧钢窄带材.交货技术条件.第4部分:弹簧钢和其它用途钢 | Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 4: Spring steels and other applications; German version EN 10132-4:2000 + AC:2002 |
| DIN EN 10151-2003 | 不锈钢弹簧带材.交货技术条件 | Stainless steel strip for springs - Technical delivery conditions; German version EN 10151:2002 |
| DIN EN 10270-1-2001 | 机械弹簧钢丝.第1部分:铅淬火冷拉制非合金钢丝 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed steel wire; German version EN 10270-1:2001 |
| DIN EN 10270-2-2001 | 机械弹簧钢丝.第2部分:油淬火和回火弹簧钢丝 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire; German version EN 10270-2:2001 |
| DIN EN 10270-3-2001 | 机械弹簧钢丝.第3部分:不锈钢弹簧钢丝 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire; German version EN 10270-3:2001 |
| DIN EN 12384-1999 | 铜和铜合金.带材弹簧弯曲极限的测定 | Copper and copper alloys - Determination of spring bending limit on strip; German version EN 12384:1999 |
| DIN EN 13298-2003 | 铁路设施.悬挂零部件.螺旋钢制悬挂弹簧 | Railway applications - Suspension components - Helical suspension springs, steel; German version EN 13298:2003 |
| DIN EN 13906-1-2002 | 圆形金属丝和棒材制柱形螺旋弹簧.计算和设计.第1部分:压缩弹簧; 德文版本 EN 13906-1:2002 | Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs; German version EN 13906-1:2002 |
| DIN EN 13906-2-2002 | 圆形金属丝和棒材制柱形螺旋弹簧.计算和设计.第2部分:拉伸弹簧; 德文版本 EN 13906-2:2001 | Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs; German version EN 13906-2:2001 |
| DIN EN 13906-3-2002 | 圆形金属丝和棒材制柱形螺旋弹簧.计算和设计.第3部分:扭矩弹簧; 德文版本 EN 13906-3:2001 | Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3: Torsion springs; German version EN 13906-3:2001 |
| DIN EN 14200-2004 | 铁路设施.悬挂组件.钢制抛物线形弹簧 | Railway applications - Suspension components - Parabolic springs, steel; German version EN 14200:2004 |
| DIN EN 14817-2006 | 铁路设施.悬架元部件.空气弹簧控制元素 | Railway applications - Suspension components - Air spring control elements English version of DIN EN 14817:2006-08 |
| DIN EN 1654-1998 | 铜和铜合金.弹簧和连接器用带材 | Copper and copper alloys - Strip for springs and connectors; German version EN 1654:1997 |
| DIN EN 2591-413-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第413部分:弹簧接地系统的保持力 | Aerospace series - Elements of electrical and optical connection; test methods - Part 413: Holding force of grounding spring system; German version EN 2591-413:1998 |
| DIN EN 4166-2006 | 航空航天系列.三部分弹簧张力夹具.聚四氟乙烯轴衬 | Aerospace series - Clips, spring tension, three parts - PTFE bushes; German and English version EN 4166:2004 |
| DIN EN 4167-2006 | 航空航天系列.三部分弹簧张力夹具.耐热钢FE-PA2601(A286)制内夹具 | Aerospace series - Clips, spring tension, three parts - Inner clips in heat resisting steel FE-PA2601 (A286); German and English version EN 4167:2004 |
| DIN EN 4168-2006 | 航空航天系列.三部分弹簧张力夹具.耐热钢FE-PA2601(A286)制外夹具 | Aerospace series - Clips, spring tension, three parts - Outer clips in heat resisting steel FE-PA2601 (A286); German and English version EN 4168:2004 |
| DIN EN 4420-2004 | 航空航天系列.合金钢FE-PA3903制有弹簧张力的卡箍 | Aerospace series - Clips, spring tension, in alloy steel FE-PA3903; German and English version EN 4420:2003 |
| DIN EN 4585-2004 | 航空航天系列.弹簧拉伸卡箍.技术规范 | Aerospace series - Clips, spring tension - Technical specification; German and English version EN 4585:2003 |
| DIN EN 60352-7-2003 | 无焊连接.第7部分:弹簧夹连接件.一般要求、试验方法和使用指南 | Solderless connections - Part 7: Spring clamp connections; General requirements, test methods and practical guidance (IEC 60352-7:2002); German version EN 60352-7:2002 |
| DIN EN 61076-2-101-2006 | 电子设备连接器.第2-101部分:圆形连接器.低压设备用带螺钉或弹簧锁紧的M8圆形连接器、带螺钉锁紧的M12圆形 | Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications (IEC 61076-2-101:2003 + A1:2006); German version EN 61076-2-101:2003 + A1:2006 |
| DIN EN ISO 10427-1-2003 | 石油天然气工业.套管扶正器.第1部分:弓形弹簧式套管扶正器 | Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001); German and English version EN ISO 10427-1:2001 |
| DIN EN ISO 7500-1 Bb.2-1999 | 金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.弹簧试验机的要求、验 | Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing machines |
| DIN EN ISO 8748-2007 | 弹簧型直销.卷制重型(ISO 8748-2007) | Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007); German version EN ISO 8748:2007 |
| DIN EN ISO 8750-2007 | 弹簧型直销.卷制标准型(ISO 8750-2007) | Spring-type straight pins - Coiled, standard duty (ISO 8750:2007); German version EN ISO 8750:2007 |
| DIN EN ISO 8751-2007 | 弹簧型直销.卷制轻型(ISO 8751-2007) | Spring-type straight pins - Coiled, light duty (ISO 8751:2007); German version EN ISO 8751:2007 |
| DIN EN ISO 8752-1998 | 弹簧式直销.开槽重型 | Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997); German version EN ISO 8752:1997 |
| DIN ISO 10069-1-2000 | 冲压工具.弹性体压缩弹簧.第1部分:总规范 | Tools for pressing - Elastomer pressure springs - Part 1: General specification (ISO 10069-1:1991) |
| DIN ISO 10069-2-2000 | 压力工具.弹性体压缩弹簧.第2部分:附件规范 | Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories (ISO 10069-2:1991) |
| DIN ISO 10243-1993 | 冲压工具.矩形截面的压力弹簧.安装座的尺寸和颜色代码 | Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding; identical with ISO 10243:1991 |
| DIN ISO 11901-1-2005 | 冲压工具.气压弹簧.第1部分:一般规范 | Tools for pressing - Gas springs - Part 1: General specifications (ISO 11901-1:2003) |
| DIN ISO 11901-2-2005 | 冲压工具.气压弹簧.第2部分:附件规范 | Tools for pressing - Gas springs - Part 2: Specification of accessories (ISO 11901-2:2004) |
| DIN ISO 2162-1-1994 | 技术产品文献.弹簧.第1部分:简要说明 | Technical products documentation - Springs - Part 1: Simplified representation; identical with ISO 2162-1:1993 |
| DIN ISO 2162-2-1994 | 技术产品文献.弹簧.第2部分:圆柱形螺旋压力弹簧的说明 | Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs; identical with ISO 2162-2:1993 |
| DIN ISO 366-3-1990 | 纺织机械和附件.钢筘.第3部分:具有双弹簧的摇动杆金属筘.尺寸和标识; 等同采用 ISO 366-3:1988 | Textile machinery and accessories; reeds; metal reeds with double-spring baulk; dimensions and designation; identical with ISO 366-3:1988 |
| DIN ISO 6626-1990 | 内燃机.活塞环.螺旋弹簧承载油控制环 | Internal combustion engines; piston rings; coil-spring-loaded oil control rings; identical with ISO 6626:1989 |
| DIN ISO 93-2-2006 | 纺织机械和附件.圆筒形条筒.第2部分:弹簧底(ISO 93-2:1998) | Textile machinery and accessories - Cylindrical sliver cans - Part 2: Spring bottoms (ISO 93-2:2006) English version of DIN ISO 93-2:2006-09 |
| DIN V 4001-302 Bb.1-1993 | CAD标准零件库.几何形状和参数的规范.带齿的、波汶状的、和锥形弹簧垫圈 | CAD standard parts library; specifications of geometry and parameters; toothed-, wave spring- and conical spring washers |
| DIN V 4001-302-1993 | CAD标准件文件.几何形状和参数规范.带齿的、波汶状的、和锥形弹簧垫圈 | CAD standard parts file; specifications of geometry and parameters; toothed-, wave spring- and conical spring washers |
| DIN V 65900-19-2001 | 航空航天.弹簧拉力夹.设计推荐规范 | Aerospace series - Clips, spring tension - Design recommandations (AECMA Technical Report TR 4586:2000) |
| DIN V 65900-20-2001 | 航空航天.弹簧拉力夹.装配推荐规范 | Aerospace series - Clips, spring tension - Assembly recommandations (AECMA Technical Report TR 4587:2000) |
| DIN V 65900-8-1995 | 航空航天系列.弹簧张力式三节管夹.总装建议 (AECMA 技术报告 TR 4169:1995) | Aerospace series - Clips, spring tension, three parts - Assembly recommendations (AECMA Technical Report TR 4169:1995) |
| 编号 | 中文名称 | 英文名称 |