| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI Z21.13-2004 | 燃气低压蒸汽锅炉和热水锅炉 | Gas-Fired Low Pressure Steam and Hot Water Boilers (same as CSA 4.9) |
| ANSI Z21.13b-2007 | 燃气低压蒸汽锅炉和热水锅炉 | Gas-Fired Low Pressure Steam and Hot Water Boilers (same as CSA 4.9b) |
| ANSI/AAMI ST79-2006 | 医疗设备中蒸汽消毒和灭菌保证用综合指南 | Comprehensive guide to steam sterilization and sterility assurance in health care facilities |
| ANSI/AAMI ST8-2001 | 医院蒸汽灭菌器 | Hospital Steam Sterilizers |
| ANSI/AAMI/ISO 11140-3-2007 | 卫生保健品灭菌.化学指示剂.第3部分:布维-狄(Bowie和Dick)型蒸汽渗透试验用2级指示剂系统 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicators systems for use in the Bowie and Dick steam penetration test |
| ANSI/AAMI/ISO 11140-4-2007 | 卫生保健品灭菌.化学指示剂.第4部分:蒸汽渗透检测布维-狄(Bowie和Dick)型试验可选2级指示剂 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to Bowie and Dick test for detection of steam penetration |
| ANSI/API 612(ISO 10437-2003)-2005 | 石油、石化和天然气工业.蒸汽涡轮.专用设施 | Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications |
| ANSI/API 612-2005 | 石油、石化和天然气行业-蒸汽涡轮－专用 | Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications |
| ANSI/ASME PTC12.2-1998 | 性能测试规程.蒸汽冷凝装置 | Performance Test Code on Steam Surface Condensers |
| ANSI/ASME PTC19.11-1997 | 动力循环中水和蒸汽的取样、调节和分析 | Steam and Water Sampling, Conditioning and Analysis in the Power Cycle |
| ANSI/ASME PTC30.1-2007 | 空气制冷蒸汽冷凝器 | Air Cooled Steam Condensers |
| ANSI/ASME PTC4-1998 | 性能试验规程.蒸汽发生装置 | Performance Test Code - Steam Generating Units (includes ASME 1968 and 1969 addenda) |
| ANSI/ASME PTC4.4-1981 | 燃气轮机热回收蒸汽发电机 | Gas Turbine Heat Recovery Steam Generators |
| ANSI/ASME PTC6.2-2004 | 联合循环蒸汽涡轮机 | Steam Turbines in Combined Cycles |
| ANSI/ASME TDP-1-2006 | 发电用蒸汽轮机防水损坏的推荐实施规程 | Recommended Practices for the Prevention of Water Damage to Steam Turbines Used for Electric Power Generation |
| ANSI/ASTM D4079-2000 | 蒸汽去油脂等级甲基规范 | Specification for Vapor-Degrasing Grade Methylene |
| ANSI/ASTM D4126-2000 | 蒸汽去油脂等级和通用溶剂等级1,1,1-三氯乙烷规范 | Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane |
| ANSI/ASTM D4248-1999 | 蒸汽涡轮发电机油路系统设计(05.02) | Design of Steam Turbine Generator Oil Systems (05.02) |
| ANSI/ASTM D4376-1998 | 蒸汽脱脂级四氯乙烯规范 | Specification for Vapor-Degreasing Grade Perchloroethylene |
| ANSI/ASTM D4378-2003 | 蒸汽和燃气轮机矿物油在运行中的监测 | In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines (05.02) |
| ANSI/ASTM D4953-2006 | 汽油和汽油氧化混合物的蒸汽压力试验方法(烘干法) | Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) |
| ANSI/ASTM D5305-1997 | 液化石油气蒸汽中乙硫醇的测定用试验方法 | Test Method for the Determination of Ethyl Mercaptan in LP-Gas Vapor |
| ANSI/ASTM D6368-2000 | 蒸汽脱脂等级和普通溶剂丙基溴化物规范 | Specification for Vapor-Degreasing Grade and General Solvent Grave Normal-Propyl Bromide |
| ANSI/ASTM D6439-2005 | 蒸汽、气体和水电涡轮润滑系统的清洁、冲洗和纯化指南 | Guide for Cleaning, Flushing and Purification of Steam, Gas and Hydroelectric Turbine Lubrication Systems |
| ANSI/ASTM F1369-1993 | 热水蒸汽对流加热器规范 | Specification for Heaters, Convection, Steam and Hot Water |
| ANSI/ASTM F1508-1997 | 用于蒸汽、气体和液体设备的角型减压阀规范 | Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services |
| ANSI/ASTM F1565-2000 | 蒸汽供应减压阀规范 | Specification for Pressure-Reducing Valves for Steam Service |
| ANSI/ASTM F1785-1997 | 蒸汽壶性能试验方法 | Test Method for Performance of Steam Kettles |
| ANSI/EIA-364-53B-2000 | 电连接器.TP53硝酸蒸汽试验.镀金层 | Electric Connectors - TP53, Nitric Acid Vapor Test, Gold Finish |
| ANSI/HI 8.1-8.5-2000 | 蒸汽直动活塞泵.术语、定义、应用和操作 | Direct Acting Steam Pumps for Nomenclature, Definitions, Application, and Operation |
| ANSI/IEEE 502-1985 | 矿物燃料装置连接的蒸汽站防护、联锁和控制指南 | Fossil-Fueled Unit-Connected Steam Stations, Guide for Protection, Interlocking, and Control of |
| ANSI/ISA 77.44.01-2007 | 化石燃料厂蒸汽温度控制系统.圆通型 | Fossil Fuel Plant Steam Temperature Control System - Drum Type |
| ANSI/ISEA 102-1990 | 气体检测管.工作环境中毒气和毒蒸汽的快速检测型 | Gas Detector Tube Units - Short-Term Type for Toxic Gases and Vapors in Working Environments |
| ANSI/NFPA 18A-2006 | 火灾控制和蒸汽缓解用水添加剂的标准 | Standard on Water Additives for Fire Control and Vapor Mitigation |
| ANSI/NFPA 8506-1995 | 热回收蒸汽发生器 | Heat Recovery Steam Generators |
| ANSI/SAE J639-1994 | 汽车客车车厢制冷的机械蒸汽压缩制冷设备或系统的安全实施规程 | Mechanical Vapor Compression Refrigeration Equipment or Systems Used to Cool Passenger Compartment of Motor Vehicles, Safety Practices for |
| ANSI/UL 260-2007 | 防火服务用蒸汽收集器和集水阀门安全性的标准 | Standard for Safety for Dry Pipe and Deluge Valves for Fire-Protection Service |
| ASME PTC 19.11-1997 | 动力循环中水和蒸汽的取样、状态调节和分析 | (Steam and water sampling, conditioning, and analysis in the power cycle) |
| ASME PTC 32.1-1969 | 核装置蒸汽供给系统 | (Nuclear steam supply systems) |
| ASME PTC 39.1-1980 | 蒸汽系统的冷凝水清除装置 | (Condensate removal devices for steam systems) |
| ASME PTC 4-1998 | 燃烧式蒸汽发生器 | (Fired steam generators) |
| ASME PTC 4.2-1969 | 煤块粉碎机.PTC4.1蒸汽发生组件运行测试规程补充件 | (Coal pulverizers - Supplement to performance test code for steam generating units, PTC 4.1) |
| ASME PTC 4.3-1968 | 空气加热器.PTC4.1蒸汽发生组件运行测试规程补充件 | (Air heaters - Supplement to performance test code for steam generating units, PTC 4.1) |
| ASME PTC 4.4-1981 | 燃气轮机热回收蒸汽发生器 | (Gas turbine heat recovery steam generators) |
| ASME PTC 5-1949 | 往复式蒸汽发动机 | (Reciprocating steam engines) |
| ASME PTC 7-1949 | 往复式蒸汽驱动活塞泵 | (Reciprocating steam-driven displacement pumps) |
| ASME PTC PM-1993 | 蒸汽发电厂运行监控导则 | (Performance monitoring guidelines for steam power plants) |
| ASTM A 472/A 472M-2007 | 蒸汽涡轮机轴和转子锻件热稳定性的标准规范 | Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
| ASTM B 66/B 66M-2006 | 蒸汽机车易损零件用青铜铸件的标准规范 | Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts |
| ASTM B 735-2006 | 用硝酸蒸汽测试金属基体上金涂层孔隙率的标准试验方法 | Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor |
| ASTM B 799-1995 | 用亚硫酸/SO2蒸汽测试金和钯镀层孔隙度的标准试验方法 | Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor |
| ASTM B 935-2005 | 黑色粉末冶金(P/M)材料蒸汽处理的标准指南 | Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials |
| ASTM C 1104/C 1104M-2000 | 测定未覆面矿物纤维绝缘材料蒸汽的吸收率的标准试验方法 | Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation |
| ASTM C 1258-1994 | 隔热用蒸汽缓凝剂耐高温和耐湿度性能标准试验方法 | Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation |
| ASTM C 1263-1995 | 挠性水蒸汽缓凝剂热完整性标准试验方法 | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM D 1066-2006 | 取样蒸汽的标准实施规程 | Standard Practice for Sampling Steam |
| ASTM D 1142-1995 | 露点温度法测定气体燃料中蒸汽含量的标准试验方法 | Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature |
| ASTM D 2029-1997 | 用露点法测定电绝缘气体中水蒸汽含量的试验方法 | Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point |
| ASTM D 2186-2005 | 蒸汽中沉积杂质的标准试验方法 | Standard Test Methods for Deposit-Forming Impurities in Steam |
| ASTM D 3483-2005 | 蒸汽发生器管中累积沉积物的标准试验方法 | Standard Test Methods for Accumulated Deposition in a Steam Generator Tube |
| ASTM D 3603-2007 | 有水的情况下蒸汽涡轮机油的防锈特性用标准试验方法(水平圆盘法) | Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) |
| ASTM D 3833-1996 | 压感胶带的水蒸汽穿透性的试验方法 | Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
| ASTM D 4079-2000 | 蒸汽脱脂级亚甲基氯的标准规范 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
| ASTM D 4237-1990 | 蒸汽设备用橡胶软管的试验方法 | Test Methods for Rubber Hose Used for Steam Applications |
| ASTM D 4304a-2006 | 蒸汽或燃气轮机中用矿物润滑剂的标准规范 | Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines |
| ASTM D 4376-2002 | 蒸汽脱脂等级全氯乙烯的标准规范 | Standard Specification for Vapor-Degreasing Grade Perchloroethylene |
| ASTM D 4378-2003 | 蒸汽和燃气轮机用矿物油在使用过程中监测的标准实施规程 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines |
| ASTM D 4463-1996 | 淡水分裂催化剂的金属自由蒸汽去活化作用标准指南 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM D 5052-2000 | 皮革对水蒸汽的渗透性的标准试验方法 | Standard Test Method for Permeability of Leather to Water Vapor |
| ASTM D 6368-2006 | 基于一般级别的丙基溴化物和技术级别的一般级别的丙基溴化物的蒸汽脱脂溶剂的标准规范 | Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide |
| ASTM D 814-1995 | 橡胶特性挥发性液体蒸汽渗透性的标准试验方法 | Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids |
| ASTM E 1385-2000 | 用蒸汽蒸馏法分立和浓缩从火烧瓦砾样品中获取的可燃液体残渣的标准实施规程 | Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Steam Distillation |
| ASTM E 1643-1998 | 与混凝土板下土壤或粒状填料接触用水蒸汽阻滞剂的安放标准实施规范 | Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs |
| ASTM E 1993-1998 | 与混凝土板下土壤或粒状填料接触用沥青水蒸汽阻滞剂的标准规范 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM E 947-1983 | 化学分析用单相地热液体取样或蒸汽取样 | Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis |
| ASTM F 1139-1988 | 蒸汽疏水阀和排水管 | Standard Specification for Steam Traps and Drains |
| ASTM F 1217-2003 | 蒸汽炊具的标准规范 | Standard Specification for Cooker, Steam |
| ASTM F 1484-2005 | 蒸汽锅性能的标准试验方法 | Standard Test Methods for Performance of Steam Cookers |
| ASTM F 1508-1996 | 用于蒸汽、气体和液体设备的角型减压阀标准规范 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| ASTM F 1522-1995 | 使用蒸汽洗提工艺减少化学溢流的标准导则 | Standard Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills |
| ASTM F 2069-2000 | 评价爆破蒸汽探测器的标准操作规程 | Standard Practice for Evaluation of Explosives Vapor Detectors |
| ASTM G 2/G 2M-2006 | 在750°F蒸汽中或在680°F水中锆、铪及其合金产品的腐蚀测试的标准试验方法 | Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C]or in Steam at 750°F [400°C] |
| IEEE 502-1985 | 使用矿物燃料的机组连接蒸汽站的保护、联锁及控制指南 | (Guide for protection, interlocking, and control of fossil-fueled unit-connected steam stations) |
| UL 260-1994 | 防火用蒸汽收集器和和集水阀门 | (Dry pipe and deluge valves for fire-protection service ) |
| UL 61010A-2-041-2002 | 实验室用电气设备.第2部分:医用材料处理和实验室作业用蒸汽高压釜的特殊要求 | (Electrical equipment for laboratory use - Part 2: Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory processes ) |
| 编号 | 中文名称 | 英文名称 |