| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 29502-1-1986 | 航空航天.织物增强的丙烯酸类树脂的飞机窗玻璃的边缘加强材料.设计指令 | Aerospace; edge reinforcements for aircraft glazings of fabric reinforced acrylic resins; directives for design |
| DIN 29505-1987 | 航空航天.纤维增强的塑料构件.图纸和零件清单的说明 | Aerospace; components of fibre reinforced plastics; indications in drawings and parts lists |
| DIN 29531-1990 | 航空航天.铝合金和镁合金铸件.技术规范. | Aerospace; castings of aluminium and magnesium alloys; technical specification |
| DIN 29543-1990 | 航空航天.锻铝合金无缝承内压管材.技术规范.不适用于新设计 | Aerospace; seamless internal pressure tubes in wrought aluminium alloys; technical specification; inactive for new design |
| DIN 29544-1990 | 航空航天.铝和锻铝合金无缝导管.技术规范.不适用于新设计 | Aerospace; seamless duct tubing of aluminium and wrought aluminium alloys; technical specification; inactive for new design |
| DIN 29546-1990 | 航空航天.锻铝合金薄片板材，中厚板材和带材；技术规范.不适用于新设计 | Aerospace; wrought aluminium alloys sheet, plate and strip; technical specification; inactive for new design |
| DIN 29547-1990 | 航空航天.锻铝合金无缝结构管材.技术规范.不适用于新设计 | Aerospace; seamless structural tubes in wrought aluminium alloys; technical specification; inactive for new design |
| DIN 29548-1-1993 | 航空和航天.楔形支距测法 | Aerospace; offsettings with wedge |
| DIN 29548-2-1993 | 航空和航天.无楔形支距测法 | Aerospace; offsettings without wedge |
| DIN 29548-3-1993 | 航空和航天.支距测法.结构和示例说明 | Aerospace; offsettings; directions for design and examples |
| DIN 29571-2-1992 | 航空航天.电气子系统.电路、设备和电缆标识 | Aerospace; electrical subsystems; identification of circuits, equipments and cables |
| DIN 29571-3-1990 | 航空航天.电气设备.第3部分:负荷分析和供电量 | Aerospace; electrical equipment; analysis of load and power source capacity |
| DIN 29576-1-1992 | 航空航天.飞机电气系统特性.不适用于新结构 | Aerospace; aircraft electrical systems; characteristics; inactive for new design |
| DIN 29576-2-1987 | 航空和航天.飞机电气系统.对飞机里敷设的电缆的检验 | Aerospace; aircraft electrical systems; testing of electrical cables installed in aircraft |
| DIN 29576-3-1991 | 航空航天.飞机电气系统.接地 | Aerospace, aircaft electrical systems; bonding |
| DIN 29576-4-1993 | 航空和航天.飞机电气系统.短路特性检验 | Aerospace, aircraft electrical systems; testing of short-circuit behaviour |
| DIN 29576-5-1989 | 航空航天.飞机电气系统.电气仪表的检验及其与电气系统的兼容性 | Aerospace; electrical systems for aircraft; testing of electrical equipment and its compatibility with the electrical system |
| DIN 29583-1987 | 航空航天.飞行器的丙烯酸塑料门窗玻璃的维护和修理.一般准则 | Aerospace; maintenance and repairing of aircraft glazings of acrylic plastics; general directions |
| DIN 29591 Berichtigung 1-2005 | 航空航天焊接.焊接工人的资格检验.金属构件的焊接.对DIN 29591-2004的勘误 | Welding in aerospace - Qualification testing of welders - Welding of metallic components, Corrigenda to DIN 29591:2004-10 |
| DIN 29591-2004 | 航空航天焊接.焊接工人的资格试验.金属构件的焊接 | Welding in aerospace - Qualification testing of welders - Welding of metallic components |
| DIN 29594-1989 | 航空航天.米制系列，铝合金锁环. | Aerospace; aluminium alloy collars, metric series |
| DIN 29595-2007 | 航空航天焊接法.熔焊金属构件.要求 | Welding in aerospace - Fusion welded metallic components - Requirements |
| DIN 29597-1995 | 航空航天.液体涂层材料的应用 | Aerospace - Application of liquid coating materials |
| DIN 29638-2-1988 | 航空和航天.自锁压紧螺母.结构和安装说明 | Aerospace; press nuts, self-locking; directions for design and installation |
| DIN 29639-2-1988 | 航空和航天.自锁、浮动、压紧螺母.结构和安装说明 | Aerospace; press nuts, self-locking, floating; directions for design and installation |
| DIN 29640-1986 | 航空航天.丙烯酸酯塑料的软化处理.制造规程 | Aerospace; tempering of acrylic plastics; directives for manufacture |
| DIN 29657-1991 | 航空航天.钢和镍合金无缝结构管材.技术规范 | Aerospace; seamless structural tubes in steel and nickel alloys; technical specification |
| DIN 29730-1-1989 | 航空航天.单剪切万用分度头铆接用静载荷铆钉设计值.第1部分:铆钉材料 3.1124 和 3.1324 | Aerospace; rivet design values, static load, for universal head rivet joints, single shear; rivet materials 3.1124 and 3.1324 |
| DIN 29730-2-1989 | 航空航天.双剪切万用分度头铆接用静载荷铆钉设计值.第2部分:铆钉材料 3.1124 和 3.1324 | Aerospace; rivet design values, static load, for universal head rivet joints, double shear; rivet materials 3.1124 and 3.1324 |
| DIN 29730-3-1989 | 航空航天.单剪切万用分度头铆接用静载荷铆钉设计值.第3部分:铆钉材料 3.3354 | Aerospace; rivet design values, static load, for universal head rivet joints, single shear; rivet material 3.3354 |
| DIN 29730-4-1989 | 航空航天.双剪切万用分度头铆接用静载荷铆钉设计值.第4部分:铆钉材料 3.3354 | Aerospace; rivet design values, static load, for universal head rivet joints, double shear; rivet material 3.3354 |
| DIN 29730-5-1989 | 航空航天.单剪切万用分度头铆接用静载荷铆钉设计值.第5部分:铆钉材料 2.4360 | Aerospace; rivet values static load, for universal head rivet joints, single shear; rivet material 2.4360 |
| DIN 29730-6-1989 | 航空航天.双剪切万用分度头铆接用静载荷铆钉设计值.第6部分:铆钉材料 2.4360 | Aerospace; rivet calculation values static load, for universal head rivet joints, double shear; rivet material 2.4360 |
| DIN 29731-1-1989 | 航空航天.单剪沉头铆钉连接用静载荷铆钉设计值.第1部分:铆钉材料 3.1124 和 3.1324 | Aerospace; rivet design values static load, for countersunk rivet joints, single shear; rivet materials 3.1124 and 3.1324 |
| DIN 29731-2-1989 | 航空和航天.双剪沉头铆钉铆接的静态负载设计值.铆钉材料3.1124和3.1324 | Aerospace; rivet design values static load, for countersunk rivet joints, double shear; rivet materials 3.1124 and 3.1324 |
| DIN 29731-5-1989 | 航空航天.单剪切沉头铆钉连接用静载荷铆钉设计值.第5部分:铆钉材料 2.4360 | Aerospace; rivet design values static load, for countersunk rivet joints, single shear; rivet material 2.4360 |
| DIN 29731-51-1989 | 航空航天.单剪切压花沉头铆钉连接用静载荷铆钉设计值.第51部分:铆钉材料 3.1124 和 3.1324 | Aerospace; rivet design values static load, for countersunk rivet joints, single shear, dimpled; rivet materials 3.1124 and 3.1324 |
| DIN 29731-52-1989 | 航空航天.双剪切压花沉头铆钉连接用静载荷铆钉设计值.第52部分:铆钉材料 3.1124 和 3.1324 | Aerospace; rivet design values static load, for countersunk rivet joints, double shear, dimpled; rivet materials 3.1124 and 3.1324 |
| DIN 29731-6-1989 | 航空航天.单剪切压花沉头铆钉连接用静载荷铆钉设计值.第6部分:铆钉材料 2.4360 | Aerospace; rivet design values static load, for countersunk rivet joints, single shear, dimpled; rivet material 2.4360 |
| DIN 29732-1-1984 | 航空航天.通用头的单向剪切钢制紧公差铆钉用静载荷铆接计算值 | Aerospace; rivet calculation values, static load, for close tolerance rivets of steel with universal head, single shear |
| DIN 29732-3-1984 | 航空航天.带凸头的单向剪切钛合金紧公差螺栓用静载荷铆接计算值 | Aerospace; rivet calculation-values, static load, for close tolerance bolts of titanium alloy, with protruding head, single shear |
| DIN 29733-1-1984 | 航空航天.沉头的单向剪切钢制紧公差铆钉用静载荷铆接计算值 | Aerospace; rivet calculation values, static load, for close tolerance rivets of steel, with countersunk head, single shear |
| DIN 29733-3-1984 | 航空航天.沉头的单向剪切钛合金紧公差螺栓用静载荷铆接计算值 | Aerospace; rivet calculation values, static load, for close tolerance bolts of titanium alloy, with countersunk head, single shear |
| DIN 29734-4-1984 | 航空航天.平头的单向剪切盲铆钉用静载荷铆接计算值 | Aerospace; rivet calculation values, static load, for blind rivets with flat head, single shear |
| DIN 29734-6-1989 | 航空航天.第6部分:单剪切符合 NAS 1398D 的凸头盲铆钉用静载荷铆钉设计值 | Aerospace; rivet design values static load, for blind rivets according to NAS 1398D with protruding head, single shear |
| DIN 29734-8-1989 | 航空航天.第8部分:单剪切符合 MS 20600AD 的凸头盲铆钉用静载荷铆钉设计值 | Aerospace; rivet design values static load, for blind rivets according to MS 20600AD with protruding head, single shear |
| DIN 29735-4-1984 | 航空航天.沉头的单向剪切盲铆钉用静载荷铆接计算值 | Aerospace; rivet calculation values, static load, for blind rivets with countersunk head, single shear |
| DIN 29735-6-1989 | 航空航天.第6部分:单剪切符合 NAS 1399D 的沉头盲铆钉用静载荷铆钉设计值 | Aerospace; rivet design values static load, for blind rivets according to NAS 1399D with countersunk head, single shear |
| DIN 29735-8-1989 | 航空航天.第8部分:单剪切符合 MS 20601AD 的沉头盲铆钉用静载荷铆钉设计值 | Aerospace; rivet design values static load, for blind rivets according to MS 20601AD with countersunk head, single shear |
| DIN 29736-2-1989 | 航空航天.燃料喷嘴接地插头和插座.技术规范 | Aerospace; fuel nozzle grounding plugs and sockets; technical specification |
| DIN 29743-1987 | 航空航天.镀镍钢.代码号 3302 和 3303 | Aerospace; nickel plating of steel; code numbers 3302 and 3303 |
| DIN 29764-2-1984 | 航空航天.工厂设备用夹紧夹具 | Aerospace; clamping grippers for workshop facilities |
| DIN 29782-1988 | 航空航天.自由移动或螺钉锁紧的钢丝螺纹镶入件.技术规范 | Aerospace; wire thread inserts; free running or screw-locking; technical specification |
| DIN 29783-1983 | 航空与航天.钛及钛合金精密铸件.技术规范 | Aerospace; precision castings of titanium and titanium alloys; technical specification |
| DIN 29831-1987 | 航空航天.开启式镍镉电池24V.40Ah | Aerospace; vented nickel-cadmium storage batteries, 24 V 40 Ah |
| DIN 29832-1983 | 航空和航天.池24V.25Ah通气式镍镉蓄电池 | Aerospace; vented nickel-cadmium storage batteries, 24 V 25 Ah |
| DIN 29833-1983 | 航空和航天.24V、15Ah通气式镍镉蓄电池 | Aerospace; vented nickel-cadmium storage batteries, 24 V 15 Ah |
| DIN 29834-1983 | 航空和航天.镍镉电池.技术条件 | Aerospace; nickel-cadmium batteries; technical specification |
| DIN 29850-1989 | 航空航天.精制铝合金的热处理 | Aerospace; heat treatment of wrought aluminium alloys |
| DIN 29867-1979 | 航空和航天.600V、200 ℃单芯铜导线.技术条件 | Aerospace; wire single-conductor, copper, 600 V, 260 °C, technical specification |
| DIN 29878-1997 | 航空和航天.电阻压焊的金属构件.交货技术条件 | Aerospace - Resistance welded metal component parts - Technical specification |
| DIN 29880-1989 | 航空航天.聚碳酸酯(PC)的半成品和模压件.技术规范 | Aerospace; polycarbonate (PC) semi-finished products and moulded parts; technical specification |
| DIN 29891-1991 | 航空航天.飞行器维护地面供电设备.安全装置 | Aerospace; ground power units for aircraft servicing; safety features |
| DIN 29895-1984 | 航空和航天.可选择的紧固件材料 | Aerospace; alternative materials for fasteners |
| DIN 29895-2-1989 | 航空航天.可选择的紧固件材料.第2部分:实心铆钉 | Aerospace; alternative materials for fasteners; solid rivets |
| DIN 29896-1980 | 航空和航天.600V.150 ℃和260 ℃带绝缘层的单根至四根铜导线屏蔽电缆技术规范 | Aerospace; shielded electrical cables, copper conductors, insulated shield, one to four conductors, 600 V, 150 and 260 °C, technical specification |
| DIN 29900-2-1980 | 航空航天.铝制单导线、600V、150℃电缆技术规范 | Aerospace; electrical cables, single conductor, aluminium, 600 V, 150 C, technical specification |
| DIN 29921-1989 | 航空航天.六角头和螺纹锁紧的钢制盲铆钉 | Aerospace; blind rivets of steel with hexagon head and thread locking |
| DIN 29924-1989 | 航空航天.螺纹锁紧的100°沉头钢制盲铆钉 | Aerospace; blind rivets of steel with countersunk head 100° and thread locking |
| DIN 29963-1979 | 航空航天.结构零件用膨胀粘结膜.技术规范 | Aerospace; expanding adhesive films for structural parts; technical specification |
| DIN 29965-1992 | 航空航天.碳纤维.碳纤维素长丝纱.技术规范 | Aerospace; carbon fibres; carbon fibre filament yarns; technical specification |
| DIN 29970-1998 | 航空航天.酚醛树脂涂层的聚酰胺纸制蜂窝芯.技术规范 | Aerospace - Honeycomb cores of polyamide paper, phenolic resin coated - Technical specification |
| DIN 29971-1991 | 航空航天.不定向碳纤维环氧树脂薄板和预浸渍带.技术规范 | Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification |
| DIN 29972-1988 | 航空航天.硬泡沫塑料材料.薄板材 技术规范 | Aerospace; rigid cellular materials; sheet; technical specification |
| DIN 29978-1994 | 航空航天.防腐冲孔或无孔精锻铝合金六角形膨胀式蜂窝芯棒.技术规范 | Aerospace - Honeycomb cores, hexagonal expanded, in wrought aluminium alloy, corrosion protected, unperforated or perforated; technical specification |
| DIN 29995-1980 | 航空航天.重熔钢、镍合金和钴合金酸洗薄片的分离试验 | Aerospace; segregation testing on etched slices of remelted steels, nickel and cobalt alloys |
| DIN 29998-1983 | 航空和航天.24V.40Ah长型通气式镍镉电池. | Aerospace; vented nickel-cadmium storage battery, 24 V 40 Ah, long |
| DIN 65000-0-2003 | 航空航天.航空航天标准的专业分类.第0部分:分类方法.概述 | Aerospace - Subject group index of aerospace standards - Part 0: Arrangement of classification numbers; Survey |
| DIN 65000-1-1983 | 航空航天.航空航天标准专业分组目录.基础标准、材料、半成品、标准件 | Aerospace; subject group index of aerospace standards; basic standards, materials, semifinished products, standard parts |
| DIN 65000-2-1984 | 航空航天.航空航天标准主题词分类索引.电工技术 | Aerospace; subject group index of aerospace standards; electrical engineering |
| DIN 65000-5-1983 | 航空航天.航空航天标准专业分组目录.工厂设备 | Aerospace; subject group index of aerospace standards; workshop facilities |
| DIN 65000-6-1983 | 航空航天.航空航天标准专业分组目录.制造方法（工艺过程） | Aerospace; subject group index of aerospace standards; manufacturing (technological processes) |
| DIN 65000-7-2004 | 航空航天.航空航天标准的专业分类.第7部分:空运货物和地面设备 | Aerospace - Subject group index of aerospace standards - Part 7: Air cargo and ground equipment |
| DIN 65000-8-1983 | 航空航天.航空航天标准专业分组目录.飞机(飞行器和推进系统) | Aerospace; subject group index of aerospace standards; aircraft (airframe and propulsion system) |
| DIN 65002-1986 | 航空和航天.圆形电气连接器.技术规范 | Aerospace; electrical connectors, circular; technical specification |
| DIN 65004-1979 | 航空和航天.长螺纹带TORQ-SET槽的盘头螺钉. | Aerospace; pan head screws with TORQ-SET recess, long thread |
| DIN 65021-1986 | 航空和航天.钢、镍和钴合金薄板.板材和带材.技术规范 | Aerospace; sheet, plate and strip of steel, nickel alloys and cobalt alloys; technical specification |
| DIN 65030-1997 | 航空航天.带截环的管螺纹接头.交货技术条件.对新设计无效 | Aerospace - Solderless tube fittings with coupling sleeves, flaveless - Technical specification; inactive for new design |
| DIN 65033-1990 | 航空航天.铝合金及镁合金锻造件.技术规范(铝合金锻件的新结构不适用) | Aerospace; aluminium- and magnesium-alloy forgings; technical specification |
| DIN 65034-1992 | 航空航天.钢、镍合金以及钴合金铸件.技术规范.不适用于新设计 | Aerospace; castings of steel, nickel- and cobalt alloys; technical specification; inactive for new design |
| DIN 65035-1993 | 航空航天.钢、镍和钴合金坯料.锻件和圆环.技术规范. | Aerospace; steel, nickel- and cobalt-alloy stock, forgings and rings,; technical specification |
| DIN 65038-1-1989 | 航空航天.钢、镍和钴合金棒材.第1部分:技术规范 | Aerospace; steel, nickel- and cobalt-alloy bars; technical specification |
| DIN 65038-2-1983 | 航空航天.航空用钢、镍合金和钴合金棒材.技术规范.第2部分:取样 | Aerospace; bars of steel, nickel alloys and cobalt alloys for aircraft; technical specification; sampling |
| DIN 65039-1983 | 航空和航天.钛及钛合金薄板、板材和带材.技术规范 | Aerospace; sheets, plates and strips of titanium and titanium alloys; technical specification |
| DIN 65040-1983 | 航空航天.钛和钛合金棒材、环形件、锻坯和锻件.技术规范 | Aerospace; bars, rings, forgingstock and forgings of titanium and titanium alloys; technical specification |
| DIN 65046-1-1998 | 航空航天.表面保护层的试验方法.油漆和清漆.第1部分:概览和定义 | Aerospace - Methods of test for surface protective coatings; paints, varnishes - Part 1: Survey and identifications |
| DIN 65046-2-1998 | 航空航天. 表面保护涂层的试验方法.油漆和清漆.第2部分:试样.试样的制备和干燥 | Aerospace - Methods of test for surface protective coatings; paints, varnishes - Part 2: Specimens, preparation of specimens, drying |
| DIN 65046-3-1998 | 航空航天.表面保护涂层的试验方法.油漆和清漆.第3部分:按交货条件进行的试验 | Aerospace - Methods of test for surface protective coatings; paints and varnishes - Part 3: Tests in as-delivered condition |
| DIN 65046-4-1998 | 航空航天.表面保护涂层的试验方法.尤其和清漆.第4部分:涂层试验 | Aerospace - Methods of test for surface protective coatings; paints, varnishes - Part 4: Testing of coatings |
| DIN 65046-5-1998 | 航空航天.表面保护涂层的试验方法.油漆和清漆.第5部分:涂层阻力试验 | Aerospace - Methods of test for surface protective coatings; paints, varnishes - Part 5: Coating resistance tests |
| DIN 65046-6-1998 | 航空航天.表面保护的试验方法.第6部分:化学镀层和电镀层.不适用于新设计 | Aerospace - Test methods for surface protection - Part 6: Chemical and electroplated coatings; inactive for new design |
| DIN 65052-1988 | 航空航天.控制钢索的滑轮.技术规范 | Aerospace; pulleys for control cables; technical specification |
| DIN 65053-1992 | 航空航天.操纵钢缆接头.技术规范.不适用于新设计 | Aerospace; control cable fittings; technical specification; inactive for new design |
| DIN 65054-1989 | 航空航天.作标记用的压敏粘接薄膜.技术规范 | Aerospace; pressure sensitive adhesive films for marking; technical specification |
| DIN 65055-1992 | 航空航天.带螺纹的操纵钢缆端部和松紧螺丝扣.技术规范.不适用于新设计 | Aerospace; threaded control cable ends and turnbarrels; technical specification; inactive for new design |
| DIN 65060-1991 | 航空航天.玻璃纤维织物.增强塑料材料用玻璃纤维丝粗纱.技术规范 | Aerospace; textile glass; textile glass filament rovings for reinforcement of plastics; technical specification |
| DIN 65063-1978 | 航空航天.软泡沫材料、石棉(温石棉)薄板的技术规范 | Aerospace; soft foam, sheets of asbestos (chrysotil), technical specification |
| DIN 65064-1998 | 航空航天.夹层结构用边缘填料和芯填料的罐烧化合物.技术规范 | Aerospace - Potting compounds for care and edge filling for sandwich structures - Technical specification |
| DIN 65065-1979 | 航空航天.纤维增强树脂.技术规范 | Aerospace; resins for fiber reinforced, technical specification |
| DIN 65066-1991 | 航空航天.纺织玻璃纤维.玻璃长丝纱织物.技术规范 | Aerospace; textile glass; woven glass filament fabric; technical specification |
| DIN 65067-1-1980 | 航空航天.具有纤维增强塑料覆盖层(FK)的夹层结构.技术规范 | Aerospace; sandwich structures with top layers of fibre reinforced plastics, technical specification |
| DIN 65071-1-1992 | 航空和航天.纤维增强模塑材料.单向缠绕的纱和粗纱试验板的制备 | Aerospace; fibre reinforced moulding materials; preparation of test panels of unidirectional wound yarns and rovings |
| DIN 65071-2-1992 | 航空航天.纤维增强模塑材料.平面增强织物试验板的制备 | Aerospace; fibre reinforced moulding materials; preparation of test panels of plain reinforcing fibre products |
| DIN 65071-3-1993 | 航空和航天.纤维增强模塑材料.蜂窝状预浸渍夹层试验板的制备 | Aerospace; fibre reinforced moulding materials; preparation of honeycomb/prepreg sandwich test panels |
| DIN 65074-1999 | 航空航天.结构组件的粘接膜和底层涂料.技术规范 | Aerospace - Adhesive films and primers for structural assemblies - Technical specification |
| DIN 65078-1988 | 航空航天.用有机溶剂进行清洗.代号0014 | Aerospace; cleaning with organic solvents; code number 0014 |
| DIN 65079-1987 | 航空航天.金属表面的碱性清理.代码0020和0021 | Aerospace; alkaline cleaning of metallic surfaces; code numbers 0020 and 0021 |
| DIN 65080-1988 | 航空航天.铝和铝合金的硷浸洗.代号0110 | Aerospace; alkaline pickling of aluminium and aluminium alloys; code number 0110 |
| DIN 65083-1986 | 航空和航天.钛及钛合金铸件的热处理 | Aerospace; heat treatment of castings of titanium and titanium alloys |
| DIN 65084-1990 | 航空航天.锻造钛和钛合金的热处理 | Aerospace; heat treatment of wrought titanium and titanium alloys |
| DIN 65090-1979 | 航空航天.用E型玻璃制成的玻璃纤维和预浸玻璃长丝织物(预浸渍体).技术规范条件 | Aerospace; textile glass, preimpregnated filament glass cloth from E-glass (Prepreg), technical specifications |
| DIN 65092-1990 | 航空航天.飞机设备的环境试验.电气设备绝缘电阻和高压试验.与ISO 2678-1985等同 | Aerospace; environmental tests for aircraft equipment; insulation resistance and high voltage tests for electrical equipment; identical with ISO 2678:1985 |
| DIN 65099-1-1989 | 航空航天.专用车间设施分类.第1部分:综述 | Aerospace; classification of special workshop facilities; survey |
| DIN 65099-2-1989 | 航空与航天.专用制造方法分类.Ａ组机.原型 | Aerospace; classification of special workshop facilities; process group A; creative forming |
| DIN 65099-3-1989 | 航空航天.专用车间设施分类.第3部分:工艺 B 组.成型 | Aerospace; classification of special workshop facilities; process group B; forming |
| DIN 65099-4-1989 | 航空航天.专用车间设施分类.第4部分:工艺 C 组.分解 | Aerospace; classification of special workshop facilities; process group C; separation |
| DIN 65099-5-1989 | 航空航天.专用车间设施分类.第5部分:工艺 C 组.组装 | Aerospace; classification of special workshop facilities; process group D; assembling |
| DIN 65099-6-1989 | 航空和航天.专用工艺设施的分类.E类工艺.涂层 | Aerospace; classification of special workshop facilities; process group E; coating |
| DIN 65099-7-1989 | 航空航天.专用车间设施分类.第7部分:工艺 F 组.材料性能的改变 | Aerospace; classification of special workshop facilities; process group F; changing of material properties |
| DIN 65099-8-1989 | 航空航天.专用车间设施分类.第8部分:工艺 G 组.检验 | Aerospace; classification of special workshop facilities; process group G: inspection |
| DIN 65099-9-1989 | 航空航天.专用车间设施分类.第5部分:工艺 H 组.物流安排、工作环境布置、运输 | Aerospace; classification of special workshop facilities; process group H: arrangement of material flow, lay-out of job environment, transportation |
| DIN 65107-1981 | 航空和航天.300V、无屏蔽、150℃扁线电缆 | Aerospace; flat-conductor cable, unshielded, 300 V, 150 °C |
| DIN 65108-1981 | 航空和航天.300V、无屏蔽、200℃扁线电缆 | Aerospace; flat-conductor cable, unshielded, 300 V, 200 °C |
| DIN 65109-1981 | 航空和航天.300V、无屏蔽、150和200℃扁线电缆.交货技术条件 | Aerospace; flat-conductor cable, unshielded, 300 V, 150 °C and 200 °C; technical specification |
| DIN 65110-1984 | 航空和航天.螺钉和螺栓的十二角头 | Aerospace; bihexagonal heads for screws and bolts |
| DIN 65112-1985 | 航空和航天.锁紧和螺纹锁紧的螺纹衬套.技术规范 | Aerospace; threaded inserts, locked and screw locking; technical specification |
| DIN 65113-1990 | 航空航天；铝和铝塑性合金棒和压制型材.技术规范.不适于新结构 | Aerospace; bars and extruded profiles of aluminium and wrought aluminium alloys; technical specification; inactive for new design |
| DIN 65115-1986 | 航空和航天.带MJ螺纹、缩颈、标称抗拉强度1100MPa、温度235 ℃以下 、钢制六角头螺栓 | Aerospace; hexagon bolts with waisted shank and MJ thread, steel nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65116-1980 | 航空和航天.硼纤维增强的模塑材料.层压试件的制备 | Aerospace; boron fibre reinforced mouldings, preparation of test laminates |
| DIN 65117-1980 | 航空和航天.预浸渍单向硼纤维层(BFK-浸渍体)，尺寸、质量 | Aerospace; preimpregnated unidirectional boron fibres (BFK-prepreg), dimensions, masses |
| DIN 65118-1 Bb.1-1991 | 航空航天.焊接金属部件.第1 Bb 1部分:图纸指示示例 | Aerospace; welded metallic components; indications on drawings; examples |
| DIN 65118-1-1991 | 航空航天.焊接金属的组合零件.第1部分:图纸指示 | Aerospace; welded metallic component parts; indications on drawings |
| DIN 65118-2-1987 | 航空和航天.焊接金属元部件.设计指令 | Aerospace; welded metallic components; directives for design |
| DIN 65121-1992 | 航空航天.螺栓、螺钉、螺母和有关零件.供车间查看的产品一览表和选用.不适用于新设计 | Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design |
| DIN 65142-1989 | 航空航天.预浸渍的纤维薄板和纤维带(预浸渍的).粘接强度的测定 | Aerospace; preimpregnated fibre sheet and tape (prepreg); determination of bond strength |
| DIN 65144-1986 | 航空和航天.热喷镀部件.技术规范 | Aerospace; thermally sprayed components; technical specification |
| DIN 65145-1-1985 | 航空航天.防撞警告信号用的电源 | Aerospace; power supply for anti-collision beacon |
| DIN 65145-2-1985 | 航空航天.防撞警告信号用的电源.技术条件 | Aerospace; power supply for anti-collision beacon; technical specification |
| DIN 65146-2-1991 | 航空航天.预浸渍的碳纤维长丝织物和环氧树脂.技术规范 | Aerospace; preimpregnated woven fabric of carbon filament yarn and epoxy resin; technical specification |
| DIN 65147-1-1987 | 航空航天.碳素纤维.碳素纤维长丝织物.尺寸、质量 | Aerospace; carbon fibres; fabric of carbon fibre filament yarn; dimensions, masses |
| DIN 65147-2-1987 | 航空航天.碳纤维.碳纤维长丝织物.技术规范 | Aerospace; carbon fibres; fabric of carbon fibre filament yarn; technical specification |
| DIN 65148-1986 | 航空航天.纤维增强塑料的试验.用拉伸试验测定中层间的抗剪强度 | Aerospace; testing of fibre-reinforced plastics; determination of interlaminar shear strength by tenside test |
| DIN 65149-1980 | 航空和航天.非支承件用钢螺钉M3和M4.交货技术条件 | Aerospace; screws of steel for non-structural components, M 3 and M 4, technical specification |
| DIN 65151-2002 | 航空航天系列.横向负载条件下紧固件的锁定特性的动态试验(振动试验) | Aerospace series - Dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test) |
| DIN 65152-1984 | 航空和航天.提升夹具.计算和验收条件 | Aerospace; lift fixtures; conditions for computation and acceptance |
| DIN 65153-1997 | 航空航天.等离子弧焊机验收试验 | Aerospace - Acceptance testing of plasma arc welding equipment |
| DIN 65154-1982 | 航空航天.车间设施上的数据标识牌 | Aerospace; identification plates for datums on workshop facilities |
| DIN 65155-1989 | 航空航天.米制系列，钉杆公差0至0.02mm的带凸头紧公差钢铆钉. | Aerospace; steel rivets, close tolerance, with protruding head, shank tolerance 0 to -0,02 mm, metric series |
| DIN 65156-1989 | 航空航天.米制系列，钉杆公差 0 至 0.02 mm 100°平头紧公差钢制铆钉 | Aerospace; close tolerance steel rivets with 100° flush head, shank tolerance 0 to - 0,02 mm, metric series |
| DIN 65157-1989 | 航空航天.米制系列钢钉套环 | Aerospace; steel collars, metric series |
| DIN 65158-1993 | 航空航天.带平圆头自锁机构的铝合金盲铆钉 | Aerospace; blind rivets of aluminium alloy with flat round head self-locking device |
| DIN 65159-1993 | 航空航天.带自锁机构的100°沉头铝合金盲铆钉 | Aerospace; blind rivets of aluminium alloy with 100° countersunk head and self-locking device |
| DIN 65164-1-1997 | 航空航天.非金属编织软管.第1部分:尺寸、重量 | Aerospace - Non metallic braided cable sleevings - Part 1: Dimensions, masses |
| DIN 65164-2-1997 | 航空航天.非金属编织软管.第2部分:技术规范 | Aerospace - Non metallic braided cable sleevings - Part 2: Technical specification |
| DIN 65165-1-1985 | 航空航天.灯光强度和颜色可调的驾驶舱通用照明灯 | Aerospace; cockpit utility lights with adjustable light intensity and colour change |
| DIN 65165-2-1985 | 航空和航天灯光强度和颜色可调的驾驶舱通用照明灯.技术规范 | Aerospace; cockpit utility lights with adjustable light intensity and colour change; technical specification |
| DIN 65166-1986 | 航空和航天.锻造铝合金楔形材.技术规范 | Aerospace; wrought aluminium alloy wedge; technical specifications |
| DIN 65167-1988 | 航空航天.直流28V.5A.2和4极极化单稳态插入式继电器 | Aerospace; plug-in relays; DC 28 V, two- and four pole, 5 Amp, polarized, monostable |
| DIN 65168-1988 | 航空航天.直流28V.10A.1和3极极化单稳态插入式继电器 | Aerospace; plug-in relays; DC 28 V, one- and three pole, 10 Amp, polarized, monostable |
| DIN 65169-1986 | 航空和航天.钎焊和高温钎焊元件.设计指导性说明 | Aerospace; brazed and high-temperature brazed components; directions for design |
| DIN 65170-1997 | 航空航天.硬焊及高温钎焊的金属结构构件.交货技术条件 | Aerospace - Brazed and high-temperature brazed metallic components - Technical specifications |
| DIN 65171-1984 | 航空和航天.熔焊夹具的验收检验.和控制及移动的辅助设备精度 | Aerospace; acceptance testing of fusion welding jigs; and auxiliary equipment accuracy of control and movement |
| DIN 65174-1991 | 航空航天.钛和钛合金圆棒材.尺寸，质量 | Aerospace; round bars of titanium and titanium alloys; dimensions, masses |
| DIN 65176-1987 | 航空航天.管组件的固定连接.设计和制造 | Aerospace; lacing of tube assemblies; design, manufacture |
| DIN 65177-1986 | 航空和航天.带MJ螺纹、缩颈、标称抗拉强度1100MPa、温度315 ℃以下 、钛合金制六角头螺栓 | Aerospace; hexagon bolts with waisted shank and MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperature up to 315 °C |
| DIN 65178-1-1985 | 航空航天.流体管道结构和安装.概述和定义 | Aerospace; configuration and installation of fluid pipelines; survey and definitions |
| DIN 65178-2-1985 | 航空航天.液体管道的构造形式和安装.管道组件、设计 | Aerospace; configuration and installation of fluid pipelines; tube assemblies, design |
| DIN 65178-3-1985 | 航空航天.液体管道的构造形式和安装.管道组件.制造 | Aerospace; configuration and installation of fluid pipelines; tube assemblies, manufacture |
| DIN 65178-6-1987 | 航空航天.液体管道的构造和设计.软管组件、制造 | Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture |
| DIN 65179-1993 | 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制短螺纹长度MJ螺纹带内补偿十字形筋状传动结构的 | Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65180-1986 | 航空和航天.后松式接触点的中密度和高密度圆形电气连接器.组装程序 | Aerospace; electrical circular connectors, medium and high density, rear release contacts; assembly procedures |
| DIN 65181-1989 | 航空航天.导电层表面电阻的测量 | Aerospace; measurement of electrical surface resistance of conductive layers |
| DIN 65183-1988 | 航空航天.为测定有机涂层耐侵蚀性能进行的雨水试验 | Aerospace; rain testing of organic coatings for the determination of the resistance to erosion |
| DIN 65184-1993 | 航空航天.碳纤维.高性能碳纤维素长丝纱.尺寸和质量 | Aerospace; carbon fibres; high performance carbon fibre filament yarns; dimensions, masses |
| DIN 65185-1-1993 | 航空和航天.紧固零件.结构和非结构用旋转紧固零件.技术规范 | Aerospace; fasteners; rotary fasteners for structural and non-structural applications; technical specification |
| DIN 65186-1990 | 航空航天.锻铝合金薄板和带材制的型材.技术规范.不适用于新设计 | Aerospace; wrought aluminium alloy sheet and strip shaped profiles (sections); technical specification; inactive for new design |
| DIN 65187-1986 | 航空航天.复合材料用带净孔的铝合金嵌件 | Aerospace; inserts for composite materials, with clearance hole, aluminium alloy |
| DIN 65188-1986 | 航空航天.螺钉锁紧嵌件.铝合金复合材料制.带MJ螺纹.小结构封闭式. | Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy |
| DIN 65189-1986 | 航空航天.复合材料用的铝合金制的螺钉锁紧开口式的带MJ螺纹的嵌件 | Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy |
| DIN 65190-1986 | 航空和航天.复合材料用的铝合金制的螺钉锁紧封闭式的带MJ螺纹的嵌件 | Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy |
| DIN 65191-2002 | 航空航天.有螺纹的零件浮动和螺钉锁紧的带MJ螺纹的耐腐蚀钢制复合材料用插入件 | Aerospace - Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel |
| DIN 65194-1986 | 航空和航天.圆形电气连接器用密封塞 | Aerospace; sealing plugs for electrical circular connectors |
| DIN 65196-1987 | 航空航天.圆形电气插接件防松垫圈 | Aerospace; lockwasher for electrical circular connectors |
| DIN 65197-1989 | 航空航天.制螺钉用的钛合金圆棒料及线材.尺寸和质量 | Aerospace; titanium alloy round bars and wire for screw stock; dimensions, masses |
| DIN 65202-1999 | 航空航天系列.弹性O型圈.尺寸 | Aerospace series - Elastomeric O-rings - Dimensions |
| DIN 65203-2001 | 航空航天系列.弹性体O形密封圈.技术规范 | Aerospace series - Elastomeric O-rings - Technical specification |
| DIN 65207-1987 | 航空航天.可锻铝合金薄板折叠型面（截面）的公差 | Aerospace; tolerances for wrougth aluminium alloy folded profiles (sections) |
| DIN 65209-2001 | 航空航天系统.沉头垫圈 | Aerospace series - Washers, countersunk |
| DIN 65210-1-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第1部分:软管技术规范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hoses |
| DIN 65210-2-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:软管配件技术规范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hose fittings |
| DIN 65210-3-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第3部分:成套软管组件技术规范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for complete hose assemblies |
| DIN 65211-1-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第1部分:软管技术规范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hoses |
| DIN 65211-2-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:软管配件技术规范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hose fittings |
| DIN 65211-3-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:成套软管组件技术规范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for complete hose assemblies |
| DIN 65212-1988 | 航空航天.仪表的低压软管.技术规范 | Aerospace; instrumentation low pressure hoses; technical specification |
| DIN 65213-1988 | 航空航天.公称压力为35巴以下的套管连接用软管.技术规范 | Aerospace; hoses for sleeve attachment for nominal pressures up to 35 bar; technical specification |
| DIN 65220-2002 | 航空航天.固定式或可选择式铝槽螺母间距带MJ螺纹自锁螺母的成组槽形螺母组件.分类:1100MPa/120℃ | Aerospace - Gang channel nut assembly, with self-locking nuts, with MJ thread, nut spacing fixed or optional, channel in aluminium; Classification: 1100 MPa/120 °C |
| DIN 65221-1989 | 航空航天.橡胶 - 软木制薄板材.技术规范 | Aerospace; sheets from rubber-cork; technical specification |
| DIN 65227-1992 | 航空航天.车间设施.间隙为2.5mm 的手动铣床用导套 | Aerospace; workshop facilities; guide bushes for hand milling machines, clearance 2,5 mm |
| DIN 65228-2005 | 航空航天.钎焊工能力鉴定试验.金属元件钎焊 | Aerospace - Qualification test of brazers - Brazing of metallic components |
| DIN 65229-1979 | 航空航天.密封垫片.技术规范 | Aerospace; gaskets sheets, technical specification |
| DIN 65230-1988 | 航空航天.马氏体硬化不锈钢阳极抛光.代号2600 | Aerospace; anodic polishing of maraging stainless steels; code number 2600 |
| DIN 65233-1986 | 航空航天.电阻焊机和滚缝焊机的验收 | Aerospace; acceptance test of resistance spot and roller seam welding machines |
| DIN 65236-1988 | 航空航天.钢丝.镍和钴合金丝材.技术规范 | Aerospace; steel, nickel- and cobalt-alloy wire; technical specification |
| DIN 65237-1996 | 航空航天.双层钢活塞节轴承.交货技术条件.对新设计无效 | Aerospace - Spherical plain bearings, steel on steel - Technical specification; inactive for new design |
| DIN 65238-2002 | 航空航天.自锁非浮动钢制角缘带MJ螺纹深埋头锚定螺母.分类:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 °C |
| DIN 65239-2006 | 航空航天.深沉孔、不浮动、带角、耐腐蚀钢制的MJ螺纹自锁托板螺母.等级:1100MPa/315℃/425℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65240-2002 | 航空航天.自锁浮动钢制双耳带MJ螺纹深埋头锚定螺母.分类:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65242-2006 | 航空航天.带深沉孔、浮动、双耳、带MJ螺纹的耐腐蚀钢制自锁托板螺母.等级:1100MPa/315℃/425℃ | Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65243-2002 | 航空航天.单耳浮动自锁深埋头带MJ螺纹的钢制锚定螺母.分类:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65244-2006 | 航空航天.带圆柱形深沉孔、浮动、单耳、带MJ螺纹耐腐蚀钢制自锁托板螺母.等级:1100MPa/315℃/425℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65245-1984 | 航空和航天.钢制、带MJ螺纹的六角自锁螺母.等级:1100MPa/120℃ | Aerospace; nuts, hexagon, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C |
| DIN 65246-1984 | 航空和航天.钢制、带MJ螺纹、有槽/槽顶六角自锁螺母.等级:1100MPa/120℃ | Aerospace; nuts, hexagon, slotted/castellated, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C |
| DIN 65247-1989 | 航空航天.耐蚀钢制MJ螺纹的薄型槽形/冠状的六角头螺母.等级:公称抗拉强度110MPa/使用温度425℃以下 | Aerospace; nuts, hexagon, slotted/castellated, thin, with MJ thread, corrosion-resisting steel, class: 1100 MPa/425 °C |
| DIN 65249-1987 | 航空航天.铜合金制的MJ螺纹自锁六角头螺母.等级:400MPa/120℃ | Aerospace; nuts, hexagon, with MJ thread, self-locking, in copper-alloy; class: 400 MPa/120 °C |
| DIN 65250-1989 | 航空航天.钛及钛合金制无缝内压力管.尺寸和质量 | Aerospace; seamless internal pressure tubes in titanium and titanium alloys; dimensions, masses |
| DIN 65252-1999 | 航空航天系列.开孔和闭孔弹性泡沫塑料.半成品和模塑件.技术规范 | Aerospace series - Cellular elastomeric materials, open and closed cells - Semi-finished products and moulded parts; technical specification |
| DIN 65258-1989 | 航空航天.米制系列铝和铝合金100°沉头铆钉 | Aerospace; rivets, 100° countersunk head, aluminium and aluminium alloys; metric series |
| DIN 65259-1989 | 航空航天.米制系列铝和铝合金100°沉头小头铆钉 | Aerospace; rivets, 100° countersunk head, reduced, aluminium and aluminium alloys; metric series |
| DIN 65260-1989 | 航空航天.米制系列铝和铝合金通用头铆钉 | Aerospace; rivets, universal head, aluminium and aluminium alloys; metric series |
| DIN 65262-1-1996 | 航空航天.密封复合材料.第1部分:多硫化物-聚合物基.交货技术条件 | Aerospace - Sealing compounds - Part 1: Polysulphide polymer base; technical specification |
| DIN 65262-2-1998 | 航空航天系列.密封化合物.第2部分:偏二氟乙烯-六氟丙烯基.技术规范 | Aerospace series - Sealing compounds - Part 2: Vinylidene fluoride and hexafluoropropylene base; technical specification |
| DIN 65262-3-1996 | 航空航天系列.密封复合材料.第3部分:硅橡胶基材.交货技术条件 | Aerospace series - Sealing compounds - Part 3: Silcone-rubber base; technical specification |
| DIN 65265-1998 | 航空航天.钛合金制螺纹接近顶部的MJ螺纹六角头螺栓.使用温度315℃及其以下，公称抗拉强度1100MPa | Aerospace - Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65266-1980 | 航空和航天.纺织复盖物.技术规范 | Aerospace; fabric covering, technical specification |
| DIN 65267-1992 | 航空和航天.温度235℃以下、螺纹接近于头部的、标称抗拉强度900MPa的带MJ螺纹的六角螺钉 | Aerospace; screws, hexagon, with MJ thread, threaded approximately to head, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65268-1986 | 航空和航天.MJ 螺纹、短螺纹、钛合金制、温度315℃以下、标称抗拉强度1100MPa 六角头螺栓. | Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65269-1987 | 航空航天.公称抗拉强度900MPa 使用温度为235以下的钢制短螺纹长度MJ螺纹的带筋状翼形的扭矩调节十字槽头紧 | Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65270-1992 | 航空航天.带MJ螺纹的、开槽/槽顶开槽耐腐蚀钢制自锁螺母.等级:1100MPa/120℃ | Aerospace; nuts, hexagon, slotted/castellated, with MJ thread self-locking, corrosion-resisting steel; classification: 1100 MPa/120 °C |
| DIN 65271-2002 | 航空航天系列.弹性半成品和零件.技术规范 | Aerospace series - Elastomeric semi-finished products and parts - Technical specification |
| DIN 65281-2005 | 航空航天系列.MJ螺纹、耐腐蚀钢制薄型六角螺母.等级:1100MPa/315℃/425℃ | Aerospace series - Nuts, hexagon, thin, with MJ thread, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65284-1987 | 航空航天..公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制全螺纹的MJ螺纹的带筋状翼形的扭矩调节十字 | Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65285-1987 | 航空航天.公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制短螺纹长度MJ螺纹的带有筋状翼形的扭矩调节 | Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65286-1987 | 航空航天.抗拉强度900MPa 使用温度为235以下的钢制短螺纹长度MJ螺纹的带筋状翼形的扭矩调节十字槽头埋头螺 | Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °c |
| DIN 65289-1987 | 航空和航天.公称抗拉强度1100MPa使用温度为315℃以下的钛合金制短螺纹长度MJ螺纹的带有筋状翼形的扭矩调节 | Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65298-1988 | 航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.单接点.连接尺寸.负荷.质量 | Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; single joints; connection dimensions, loads, masses |
| DIN 65299-1988 | 航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.双万向轴.连接尺寸.负荷.质量 | Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; double joints; connection dimensions, loads masses |
| DIN 65300-1988 | 航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.技术规范 | Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; technical specification |
| DIN 65306-1986 | 航空航天.复合材料用的不锈钢制带净孔的嵌件 | Aerospace; inserts for composite materials, with clearance hole, corrosion resisting steel |
| DIN 65307-1986 | 航空航天.复合材料用小型闭式螺钉锁紧带MJ螺纹耐腐蚀钢制衬套 | Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, corrosion-resisting steel |
| DIN 65308-1986 | 航空航天.复合材料用开口式用螺钉锁紧带MJ螺纹的耐腐蚀钢制衬套 | Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, corrosion-resisting steel |
| DIN 65309-1986 | 航空航天.复合材料用闭式用螺钉锁紧带MJ螺纹的耐腐蚀钢制衬套 | Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, corrosion-resisting steel |
| DIN 65313-1987 | 航空航天.公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制全螺纹的MJ螺纹的带有筋状翼形的扭矩调节盘 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65314-1998 | 航空和航天.钢制短螺纹长度MJ螺纹的带内补偿十字槽筋状传动机构的紧公差沉头螺栓.使用温度235℃及其以下， | Aerospace - Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, steel - Nominale tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65316-1993 | 航空航天.使用温度425℃以下公称抗拉强度1100MPa的耐蚀钢制短螺纹长度MJ螺纹带内补偿十字形筋状传动结构的 | Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65317-1987 | 航空航天.公称抗拉强度1100MPa使用温度为235℃以下的钢制短螺纹长度MJ螺纹的带有筋状翼形的扭矩调节十字槽 | Aerospace; countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65318-1987 | 航空航天.公称抗拉强度1100MPa使用温度为235℃以下的钢制短长度MJ螺纹的带有筋状翼形的扭矩调节十字槽头盘 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 °C |
| DIN 65319-1987 | 航空航天.公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制短长度MJ螺纹的带有筋状翼形的扭矩调节十字 | Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65320-1993 | 航空航天.使用温度235℃以下公称抗拉强度1100MPa的钢制短螺纹长度MJ螺纹带内补偿十字形筋状传动结构的紧公 | Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65321-1989 | 航空航天.聚丙烯薄板材，方格板和模压件.技术规范 | Aerospace; acrylic sheets, panes and moulded parts; technical specification |
| DIN 65324-1993 | 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制短长度MJ螺纹带内补偿十字形筋状传动结构的紧公 | Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65330-1987 | 航空航天.公称抗拉强度1100MPa使用温度为235℃以下的钢制短长度MJ螺纹的六角头螺栓. | Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65338-1993 | 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制带肩的短长度MJ螺纹紧公差六角头螺栓 | Aerospace; hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65339-1998 | 航空航天.耐腐蚀钢制带短长度MJ螺纹的紧公差六角头螺栓.使用温度425℃及其以下，公称抗拉强度1100MPa | Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel - Nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65342-2005 | 航空航天系列.耐腐蚀钢制自锁紧带深沉孔、双耳、缩径、MJ螺纹地脚螺母.等级:1100MPa/315℃/425℃ | Aerospace series - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65343-2002 | 航空航天.双耳减缩自锁深埋头带MJ螺纹的钢制锚定螺母.分类:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; Classification: 1100 MPa/235 °C |
| DIN 65344-2005 | 航空航天.耐腐蚀钢制带深沉孔、双耳、MJ螺纹自锁紧地脚螺母.等级:1100MPa/315℃/425℃ | Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65345-1986 | 航空航天.带圆柱形深沉孔、双耳、具有MJ螺纹的钢制自锁托板螺母.等级:1100MPa/235℃ | Aerospace; anchor nuts with MJ thread, deep counterbore, self-locking, two lug, steel; classification: 1100 MPa/235 °C |
| DIN 65346 Berichtigung 1-2007 | 航空航天系列.等级为:1100MPa/315℃/425℃、耐腐蚀钢单耳自锁深沉孔带MJ螺纹的托板螺母.DIN 65346-2006技术 | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C, Corrigenda to DIN 65346:2006-11 |
| DIN 65346-2006 | 航空航天.带圆柱形深沉孔、单耳、带MJ螺纹的耐腐蚀钢制自锁托板螺母.等级:1100MPa/315℃/425℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65347-2002 | 航空航天.单耳自锁深埋头带MJ螺纹的钢制锚定螺母.分类:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65348-1988 | 航空航天.钛合金无缝内承压管.技术规范 | Aerospace; seamles internal pressure tubes in titanium alloys; technical specification |
| DIN 65349-2001 | 航空航天.米制螺纹螺母和相关螺钉部件锁扭矩试验.试验方法 | Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods |
| DIN 65350-1-1988 | 航空航天.铆接.第1部分:实心铆钉用铆接工具铆接组件的可达性 | Aerospace; riveting; assembly accessibility of riveting tools for solid rivets |
| DIN 65350-2-1988 | 航空和航天.铆接.盲铆钉用铆接工具的装配可达性 | Aerospace; riveting; assembly accessibility of riveting tools for blind rivets |
| DIN 65350-3-1988 | 航空和航天.铆接.带螺纹盲铆钉用铆接工具的装配可达性 | Aerospace; riveting; assembly accessibility of riveting tools for threaded blind rivets |
| DIN 65350-4-1988 | 航空和航天.铆接.紧公差铆钉用铆接工具的装配可达性 | Aerospace; riveting; assembly accessibility of riveting tools for close tolerance rivets |
| DIN 65355-1987 | 航空航天.米制系列可锻铝合金制铆钉杆套. | Aerospace; collars, metric series, wrought aluminium alloy |
| DIN 65356-1-1988 | 航空航天.芳族聚酰胺.高强度芳族长丝纱线.第1部分:尺寸、质量 | Aerospace; aromatic polyamide (aramid); high tenacity aramid filament yarns; dimensions, masses |
| DIN 65356-2-1988 | 航空航天.芳族聚酰胺.高强度芳族长丝纱线.第2部分:技术规范 | Aerospace; aromatic polyamide (aramid); high tenacity aramid filament yarns; technical specification |
| DIN 65359-1990 | 航空航天.电压600V使用温度105℃的1至4芯导体的绝缘屏蔽铜芯导体屏蔽电缆.技术规范（不用于新结构） | Aerospace; shielded electrical cables, copper conductors, insulated shield, one to four conductors, 600 V, 105 °C; technical specification |
| DIN 65360-1992 | 航空航天.滚子链.技术规范 | Aerospace; roller chains; technical specification |
| DIN 65363-1987 | 航空航天.飞行控制杆的锁紧垫圈 | Aerospace; lock washers for flight control rods |
| DIN 65364-1991 | 航空航天.可调控制杆的叉形端头 | Aerospace; single fork ends for adjustable control rods |
| DIN 65365-1991 | 航空航天.可调控制杆的双叉形端头 | Aerospace; double fork ends for adjustable control rods |
| DIN 65367-1987 | 航空航天.管组件的间隔垫 | Aerospace; spacer for tube assemblies |
| DIN 65368-1987 | 航空航天.固定绳索.尺寸.质量 | Aerospace; lacing cords; dimensions, masses |
| DIN 65369-1991 | 航空航天.25安培的5极和11极插座 | Aerospace; sockets, five- and eleven-pole 25 Amp |
| DIN 65370-1991 | 航空航天.5安培的8和14极插座 | Aerospace; sockets, eight- and fourteen-pole 5 Amp |
| DIN 65371-1992 | 航空航天.10A.5极和11极的插座 | Aerospace; sockets, five- and eleven-pole, 10 Amp |
| DIN 65373-1989 | 航空航天.聚酰胺(PA)的半成品和模压件.技术规范 | Aerospace; polyamide (PA) semi-finished products and moulded parts; technical specification |
| DIN 65374-1989 | 航空航天.聚四氟乙烯.(PTFE)半成品和模压件.技术规范 | Aerospace; polytetrafluoroethylene (PTFE) semi-finished products and moulded parts; technical specification |
| DIN 65375-1989 | 航空航天.纤维增强的塑料.单向层压板的试验.与纤维方向垂直的压力试验 | Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction |
| DIN 65378-1989 | 航空航天.纤维增强的塑料.单向层压板的检验.与纤维方向垂直的拉伸试验 | Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction |
| DIN 65379-1992 | 航空航天.镍合金制100度沉头铆钉 | Aerospace; rivets, countersunk 100°, nickel alloys |
| DIN 65382-1988 | 航空航天.塑料用加强纤维.浸渍纱线试样的拉力试验 | Aerospace; reinforcement fibres for plastics; tensile test of impregnated yarn test specimens |
| DIN 65383-1997 | 航空航天.结构用热固环氧树脂纺织玻璃纤维长丝织物预浸渍品.技术规范 | Aerospace - Thermosetting epoxy woven glass filament fabric preimpregnated for structural applications - Technical specification |
| DIN 65385-1991 | 航空航天.液压流体动力..过滤器元件.试验数据报告 | Aerospace; hydraulic fluid power; filter elements; reporting of test data |
| DIN 65389-1996 | 航空航天.冷轧钢板.尺寸、重量 | Aerospace - Cold-rolled steel sheet - Dimensions, masses |
| DIN 65390-1989 | 航空航天.热轧钢薄板材和中厚钢板材.尺寸、质量 | Aerospace; hot-rolled steel sheet and plate; dimensions, masses |
| DIN 65391-2002 | 航空航天.自锁耐腐蚀钢制带MJ螺纹的加压螺母.分类:1100MPa/315℃/435℃ | Aerospace - Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C |
| DIN 65392-2002 | 航空航天.浮动自锁带MJ螺纹的钢制加压螺母.分类:1100 MPa/235℃ | Aerospace - Press nuts with MJ thread, self-locking, floating, steel; Classification: 1100 MPa/235 °C |
| DIN 65393-2002 | 航空航天.环箍锁紧和螺钉锁紧的钢制带MJ螺纹的螺纹插入件.分类:900 MPa/1100 MPa/1250 MPa/1550 MPa/235℃ | Aerospace - Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 °C |
| DIN 65394-2003 | 航空航天.耐腐蚀钢制带环锁和MJ螺纹的螺钉锁紧的丝套.等级:900 MPa/1100MPa/1250 MPa/1550 MPa/315鳦/425鳦 | Aerospace - Thread inserts, with MJ thread, ring locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 °C/425 °C |
| DIN 65395-1989 | 航空航天.公称抗张强度900Mpa.使用温度235℃以下的钢制环锁紧的MJ螺纹螺柱. | Aerospace; studs with MJ thread, ring locked, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65396-1989 | 航空航天.公称抗拉强度1250MPa.温度425℃以下耐蚀钢制环锁紧的MJ螺纹的螺柱 | Aerospace; studs with MJ thread, ring locked, corrosion resisting steel, nominal tensile strength 1250 Mpa, for temperatures up to 425 °C |
| DIN 65397-2003 | 航空航天.耐腐蚀钢制带MJ螺纹的闭锁、螺钉锁紧的丝套.等级:1100MPa/315℃/425℃ | Aerospace - Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C |
| DIN 65398-2003 | 航空航天.耐腐蚀钢制带MJ螺纹的闭锁、螺钉锁紧的丝套.等级:900MPa/1100 MPa/315℃ | Aerospace - Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/315 °C |
| DIN 65399-1988 | 航空航天.可锻铝合金100°沉头铆钉 | Aerospace; rivets, countersunk 100°, wrought aluminium alloys |
| DIN 65422-1-1981 | 航空航天.防撞信号灯装置 | Aerospace; anti-collision beacon light units |
| DIN 65422-2-1985 | 航空航天.防撞灯.交货技术条件 | Aerospace; anti-collision light; technical specification |
| DIN 65423-1981 | 航空和航天.有效直径为100mm 的聚光灯 | Aerospace; spotlights with 100 mm effective diameter |
| DIN 65424-1981 | 航空和航天.有效直径为134mm 的聚光灯 | Aerospace; spotlights with 134 mm effective diameter |
| DIN 65426-1-1985 | 航空航天.芳族聚酰胺.高模量长丝纱预浸渍机织物.尺寸、质量 | Aerospace; aromatic polyamide (Aramid); pre-impregnated woven fabric of high modulus filament yarn (Prepreg); dimensions, masses |
| DIN 65426-2-1989 | 航空航天.芳族聚酰胺.第2部分:由高模数长丝纱线和环氧树脂制成的长丝织物预浸渍体的技术规范 | Aerospace; aromatic polyamide (aramid); woven filament fabric prepreg from high-modulus filament yarn and epoxy resin; technical specification |
| DIN 65427-1-1984 | 航空航天.芳族聚酰胺.高模量长丝纱织物.第1部分:尺寸、质量 | Aerospace; aromatic polyamide (aramid); fabric of high modulus filament yarn; dimensions, masses |
| DIN 65427-2-1991 | 航空航天.芳香族聚酰胺（聚芳基酰胺）.高模量长丝纱织物.技术规范 | Aerospace; aromatic polyamide (aramid); fabric woven from high-modulus filament yarn; technical specification |
| DIN 65428-1987 | 航空航天.带凸头的紧固件用壁厚为0.25mm的衬套 | Aerospace; sleeves; wall thickness 0,25 mm, for fasteners with protruding head |
| DIN 65429-2002 | 航空航天.凸头紧固件用壁厚为0.5mm的套筒 | Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with protruding head |
| DIN 65430-2002 | 航空航天.埋头紧固件用壁厚为0.25mm的套筒 | Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with countersunk head |
| DIN 65431-2002 | 航空航天.埋头紧固件用壁厚为0.5mm的套筒 | Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with countersunk head |
| DIN 65433-2002 | 航空航天.带减径埋头的紧固件用壁厚为0.25mm套筒 | Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with reduced countersunk head |
| DIN 65434-1987 | 航空航天.小埋头紧固件用壁厚为0.5mm的衬套 | Aerospace; sleeves; wall thickness 0,5 mm, for fasteners with reduced countersunk head |
| DIN 65435-1989 | 航空航天.紧固件用衬套.技术规范 | Aerospace; sleeves for fasteners; technical specification |
| DIN 65436-1989 | 航空航天；钛和钛合金的标准件质量(STQ)和圆盘质量(DQ).要求和试验 | Aerospace; standard quality (STQ) and disc quality (DQ) of titanium and titanium alloys; requirements and tests |
| DIN 65438-1993 | 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制短螺纹长度的MJ螺纹紧公差十二角头螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65439-1984 | 航空和航天.MJ螺纹、紧公差、中等长度螺纹、钢制、标称抗拉强度1250MPa、温度235 ℃以下的十二角头螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1250 MPa, for temperatures up to 235 °C |
| DIN 65440-1984 | 航空和航天.带MJ螺纹、紧公差、中等长度螺纹、耐蚀钢制、标称抗拉强度1250MPa、温度315 ℃以下的十二角头螺 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in corrosion resisting steel, nominal tensile strength 1250 MPa, for temperatures up to 315 °C |
| DIN 65441-1984 | 航空和航天.带MJ螺纹、紧公差、中等长度螺纹、钢制、标称抗拉强度1550MPa、温度235 ℃以下的十二角头螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1550 MPa, for temperatures up to 235 °C |
| DIN 65442-1993 | 航空航天.使用温度315℃以下公称抗拉强度1550MPa耐蚀镍合金制中长等度MJ螺纹的紧公差十二角头螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with medium-length MJ thread, corrosion resisting nickel alloy; nominal tensile strength 1550 MPa, for temperatures up to 315 °C |
| DIN 65443-1984 | 航空和航天.带MJ螺纹、紧公差、中等长度螺纹、钢制、标称抗拉强度1800MPa、温度235 ℃以下的十二角头螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1800 MPa, for temperatures up to 235 °C |
| DIN 65444-1993 | 航空航天.米制系列镍合金100°沉头铆钉 | Aerospace; rivets, 100° countersunk head, nickel alloy, metric series |
| DIN 65445-1987 | 航空航天.镍合金制米制系列小埋头铆钉100° | Aerospace; rivets, 100° reduced countersunk head, metric series, nickel alloys |
| DIN 65446-1993 | 航空航天.米制系列镍合金通用头铆钉 | Aerospace; rivets, universal head, nickel alloys, metric series |
| DIN 65448-1988 | 航空航天.结构粘合剂.楔形粘合试验 | Aerospace; structural adhesives; wedge test |
| DIN 65451-2003 | 航空航天.带MJ螺纹的闭锁、螺钉锁紧的钢制丝套.等级:900MPa/1100 MPa/235℃ | Aerospace - Thread inserts, with MJ thread, locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/235 °C |
| DIN 65452-1988 | 航空航天.有效直径为100mm，134mm和 200mm聚光灯.技术规范 | Aerospace; spotlights with 100 mm, 134 mm and 200 mm effective diameter; technical specification |
| DIN 65453-1993 | 航空航天.碳纤维和双马来酰亚胺树脂或聚酰亚胺树脂制的预浸渍不定向薄板材 | Aerospace; preimpregnated unidirectional sheet of carbon fibres and bismaleinimide- or polyimide resin; technical specification |
| DIN 65454-1988 | 航空航天.铝和耐蚀钢挤压成型的合页.生产长度的半边合页和合页.轻型系列 | Aerospace; hinges, extruded, in aluminium and corrosion-restisting steel; half-hinges and hinges in manufacturing lengths; light series |
| DIN 65455-1990 | 航空航天.钢.镍.钛合金无缝管材.超声波检验 | Aerospace; seamless tubes in steel, nickel and titanium alloys; ultrasonic inspection |
| DIN 65456-1987 | 航空航天.飞行控制杆用的带粘接孔的垫圈 | Aerospace; washers for flight control rods, with hole for bonding |
| DIN 65457-1987 | 航空航天.钢制套环.尺寸.质量 | Aerospace; thimbles, formed from steel; dimensions, masses |
| DIN 65460-1988 | 航空航天.铝和铝合金的酸浸洗.也适用于电阻焊.代号0100 | Aerospace; acid pickling of aluminium and aluminium alloys, also for resistance welding; code number 0100 |
| DIN 65464-1990 | 航空航天.公称抗拉强度1100Pa 使用温度在315℃以下的钛合金制环锁紧的MJ螺纹螺柱 | Aerospace; studs with MJ thread, ring locked, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65465-1993 | 航空航天.米制系列铆钉组件的垫圈 | Aerospace; washers for rivet assemblies, metric series |
| DIN 65466-1996 | 航空航天.纤维增强塑料.单向层压制品试验.拉伸剪切强度和剪切模数测定 | Aerospace - Fibre reinforced plastics - Testing of unidirectional laminates; Determination of shear strength and shear modulus in tension |
| DIN 65467-1999 | 航空航天.带和不带增强物的热固化树脂系统的试验.DSC方法 | Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method |
| DIN 65468-1991 | 航空航天.喷沙清理.代号0215 | Aerospace; abrasive cleaning; code number 0215 |
| DIN 65469-1992 | 航空航天.纤维增强的塑料.单层扁平拉伸样件的拉伸试验 | Aerospace; fibre-reinforced plastics; tensile test of monolayer flat tension specimens |
| DIN 65470-1989 | 航空航天.金属材料焊接用焊接填充金属.技术规范 | Aerospace; filler metals for welding metallic materials; technical specification |
| DIN 65471-1991 | 航空航天.钛和钛合金焊接用金属填料.焊条和焊丝.尺寸，质量 | Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires; dimensions, masses |
| DIN 65473-1991 | 航空航天.电解脱脂和净化.代号0030至0033 | Aerospace; electrolytic degreasing and cleaning; code numbers 0030 to 0033 |
| DIN 65474-1992 | 航空航天.纤维增强的塑料.温度锋值试验方法 | Aerospace; fibre reinforced plastics; thermal-spike test method |
| DIN 65477-2003 | 航空航天.耐腐蚀钢制自锁紧封闭型压紧螺母.等级:1100 MPa/315 鳦/425 鳦 | Aerospace - Press nuts, with MJ thread, closed type, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C |
| DIN 65480-1989 | 航空航天.带凸缘和MJ螺纹耐腐蚀钢制自锁六角螺母.等级:1100MPa/315℃ | Aerospace; hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel; class: 1100 MPa/315 °C |
| DIN 65485-1993 | 航空航天.结构用紧固件.旋转的紧固件的机械特性.旋转的紧固件总成 | Aerospace; fasteners for structural application; rotary fastener, mechanical properties; rotary fastener, assembly |
| DIN 65486-1993 | 航空航天.结构用紧固件.旋转紧固件的机械特性.压力密封型紧固件总成 | Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight |
| DIN 65487-1993 | 航空航天.结构用紧固件.旋转紧固件.沉头螺桩 | Aerospace; fasteners for structural application; rotary fasteners; stud with countersunk head |
| DIN 65488-1993 | 航空航天.结构用紧固件.旋转紧固件.安装尺寸 | Aerospace; fasteners for structural application; rotary fasteners; installation dimensions |
| DIN 65489-1993 | 航空航天.结构和非结构用紧固件.旋转紧固件.沉头垫圈 | Aerospace; fasteners for structural and non-structural applications; rotary fasteners; countersunk washer |
| DIN 65492-1993 | 航空航天.结构紧固件.旋转紧固件.紧固件插孔 | Aerospace; fasteners for structural application; rotary fasteners; receptacle |
| DIN 65493-1993 | 航空航天.结构紧固件.旋转紧固件.压力密封式紧固件插孔 | Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight |
| DIN 65494-101-1989 | 航空航天.单剪切凸头铆钉连接用静载荷铆钉设计值.第101部分:铆钉材料 3.1124 公制系列 | Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.1124, metric series |
| DIN 65494-102-1989 | 航空航天.单剪切凸头铆钉连接用静载荷铆钉设计值.第102部分:铆钉材料 3.1324 公制系列 | Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.1324, metric series |
| DIN 65494-103-1989 | 航空航天.单剪切凸头铆钉连接用静载荷铆钉设计值.第103部分:铆钉材料 3.3354 公制系列 | Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.3354, metric series |
| DIN 65494-105-1989 | 航空航天.单剪切凸头铆钉连接用静载荷铆钉设计值.第105部分:铆钉材料 2.4360 公制系列 | Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 2.4360, metric series |
| DIN 65494-301-1989 | 航空航天.双剪切凸头铆钉连接用静载荷铆钉设计值.第301部分:铆钉材料 3.1124 公制系列 | Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.1124, metric series |
| DIN 65494-302-1989 | 航空航天.双剪切凸头铆钉连接用静载荷铆钉设计值.第302部分:铆钉材料 3.1324 公制系列 | Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.1324, metric series |
| DIN 65494-303-1989 | 航空航天.双剪切凸头铆钉连接用静载荷铆钉设计值.第303部分:铆钉材料 3.3354 公制系列 | Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.3354, metric series |
| DIN 65494-305-1989 | 航空航天.双剪切凸头铆钉连接用静载荷铆钉设计值.第305部分:铆钉材料 2.4360 公制系列 | Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 2.4360, metric series |
| DIN 65495-101-1989 | 航空航天.单剪切埋头铆钉连接用静载荷铆钉设计值.第101部分:铆钉材料 3.1124 公制系列 | Aerospace; rivet design values, static load, for flush head rivet joints, single shear; rivet material 3.1124, metric series |
| DIN 65495-102-1989 | 航空航天.单剪切埋头铆钉连接用静载荷铆钉设计值.第102部分:铆钉材料 3.1324 公制系列 | Aerospace; rivet design values, static load, for flush head rivet joints, single shear; rivet material 3.1324, metric series |
| DIN 65495-105-1989 | 航空航天.单剪切埋头铆钉连接用静载荷铆钉设计值.第105部分:铆钉材料 2.4360 公制系列 | Aerospace; rivet design values, static load, flush head rivet joints, single shear; rivet material 2.4360, metric series |
| DIN 65495-201-1990 | 航空航天.米制系列、铆钉材料3.1124、单剪切、压窝成形的、平头铆钉连接用静载荷铆钉设计值 | Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1124, metric series |
| DIN 65495-202-1990 | 航空航天.米制系列、铆钉材料3.1324、单剪切、压窝成形的、平头铆钉连接用静载荷铆钉设计值 | Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1324, metric series |
| DIN 65495-205-1990 | 航空航天.米制系列、铆钉材料2.4360、单剪切、压窝成形的、平头铆钉连接用静载荷铆钉设计值 | Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 2.4360, metric series |
| DIN 65495-301-1989 | 航空和航天.双剪切埋头铆钉连接用静载荷铆钉设计值.第301部分:铆钉材料 3.1124 公制系列 | Aerospace; rivet design values, static load, for flush heat rivet joints, double shear; rivet material 3.1124, metric series |
| DIN 65495-302-1989 | 航空航天.双剪切埋头铆钉连接用静载荷铆钉设计值.第302部分:铆钉材料 3.1324 公制系列 | Aerospace; rivet design values, static load, for flush heat rivet joints, double shear; rivet material 3.1324, metric series |
| DIN 65495-401-1990 | 航空航天.米制系列、铆钉材料3.1124、双剪切、压窝成形的、平头铆钉连接用静载荷铆钉设计值 | Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1124, metric series |
| DIN 65495-402-1990 | 航空航天.米制系列、铆钉材料3.1324、双剪切、压窝的、平头铆钉连接用静载荷铆钉设计值 | Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1324, metric series |
| DIN 65498-1991 | 航空航天.聚醚亚胺半成品和模制件.技术规范 | Aerospace; polyetherimide (PEI) semi-finished products and moulded parts; technical specification |
| DIN 65500-1984 | 航空和航天.带MJ螺纹铝合金扁六角螺母 | Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy |
| DIN 65501-2001 | 航空和航天.带MJ螺纹铆接螺母垫片 | Aerospace - Shims for anchor nuts with MJ-thread |
| DIN 65502-1984 | 航空和航天.带MJ螺纹、短螺纹、耐蚀钢制、标称抗拉强度700MPa、温度425℃以下盘头开槽 TORQ-SET (ACR)螺拴 | Aerospace; pan head bolts with ripped TORQ-SET (ACR) recess and MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65503-2003 | 航空航天.自锁、气密、双耳和钢制带MJ螺纹的托板螺帽.等级:900MPa.耐燃料性从-55鳦至+120℃ | Aerospace - Anchor nuts, with MJ thread, self-locking, pressure tight, two lug, steel; Classification: 900 MPa, fuel resistant from -55 °C to 120 °C |
| DIN 65504-2003 | 航空航天.耐燃料性从-55℃至+120℃的自锁、气密、双耳、耐腐蚀钢制带MJ螺纹的托板螺帽 | Aerospace - Anchor nuts, with MJ thread, self-locking, pressure tight, two lug, corrosion-resisting steel, fuel resistant from -55 °C to 120 °C |
| DIN 65505-2003 | 航空航天.自锁、气密、双耳、钢制带MJ螺纹地脚螺母.等级900MPa、耐-55℃至+230℃空气 | Aerospace - Anchor nuts, with MJ-thread, self-locking, pressure tight, two lug, steel; Classification: 900 MPa, air resistant from -55 °C to 230 °C |
| DIN 65506-2003 | 航空航天.耐空气从-55℃至+230℃的自锁、气密、双耳、耐腐蚀钢制带MJ螺纹的托板螺帽 | Aerospace series - Anchor nuts with MJ thread, self-locking, pressure tight, two lug, corrosion-resisting steel, air resistant, from -55 °C to 230 °C |
| DIN 65507-1986 | 航空航天.带附加垫圈和沉头孔、自锁、MJ螺纹的六角螺母.等级:1100MPa/235 | Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, steel; class: 1100 MPa/235 °C |
| DIN 65508-1986 | 航空航天.带凸缘垫片和埋头孔、自锁、耐腐蚀钢带MJ螺纹的六角螺母.等级:1100MPa/315℃/425℃ | Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, corrosion-resistant steel; class: 1100 MPa/315 °C/425 °C |
| DIN 65509-1984 | 航空和航天.带MJ螺纹、等级:1100MPa/235℃钢制六角螺母 | Aerospace; nuts, hexagon, with MJ-thread, steel, class: 1100 MPa/235 °C |
| DIN 65510-1984 | 航空和航天.带MJ螺纹、等级:1100MPa/235℃钢制扁六角螺母 | Aerospace; nuts, hexagon, thin, with MJ-thread steel, classification: 1100 MPa/235 °C |
| DIN 65515-1984 | 航空和航天.带内细齿和MJ螺纹、短螺纹、钛合金制、标称抗拉强度1100MPa、温度315℃以下凸圆头螺栓. | Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65516-1984 | 航空和航天.带内细齿和MJ螺纹、短螺纹、钢制、标称抗拉强度900MPa、温度235℃以下凸圆头螺栓. | Aerospace; cheese head bolts with internal serration thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65517-2002 | 航空航天.温度可达315℃的标称抗拉强度为1100MPa的钛合金短螺纹带内双六角和MJ螺纹的紧公差圆头螺栓 | Aerospace - Cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65518-1984 | 航空和航天.带MJ螺纹、短螺纹、钛合金制、标称抗拉强度1100MPa、温度315℃以下盘头开槽 TORQ-SET (ACR)螺拴 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65519-1984 | 航空和航天.带MJ螺纹、短螺纹、钢制、标称抗拉强度900MPa、温度235℃以下盘头开槽 TORQ-SET (ACR)螺拴 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65520-1984 | 航空和航天.带MJ螺纹、短螺纹、钢制、标称抗拉强度900MPa、温度235℃以下、紧公差、盘头开槽 TORQ-SET (ACR | Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess an MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65521-1-1984 | 航空航天.翼形十字槽.第1部分:尺寸 | Aerospace; TORQ-SET and ACR; dimensions |
| DIN 65521-2-1984 | 航空航天.翼形十字槽.第2部分:深度规 | Aerospace; TORQ-SET and ACR; penetration gauges |
| DIN 65521-3-1984 | 航空航天.翼形十字槽.第3部分:改锥尖 | Aerospace; TORQ-SET and ACR; screwdriver points |
| DIN 65522-1984 | 航空和航天.带MJ螺纹、螺纹接近头部、耐蚀钢制、标称抗拉强度700MPa、温度425℃以下六角头螺钉 | Aerospace; screws, hexagon, with MJ-thread, threaded opproximatley to head, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65523-1984 | 航空和航天.带MJ螺纹的、短螺纹、耐蚀钢制、标称抗拉强度700MPa、温度425℃以下的六角头螺栓 | Aerospace; hexagon bolts, with MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65524-1984 | 航空和航天.带MJ螺纹的、短螺纹、钢制、标称抗拉强度900MPa、温度235℃以下的六角头螺栓 | Aerospace; heaxagon bolts, with MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65525-1992 | 航空航天.使用温度235℃以下公称抗拉强度1100MPa 钢制MJ短螺纹的紧公差六角头螺栓 | Aerospace; bolts, hexagon, close tolerance, with MJ-thread, short thread, steel, nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65526-1998 | 航空航天.钛合金制带短长度MJ螺纹的紧公差六角头螺栓.使用温度315℃及其以下，公称抗拉强度1100MPa | Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65527-1984 | 航空和航天.带MJ螺纹的、短螺纹、钢制、标称抗拉强1100MPa、温度235℃以下、紧公差六角头螺栓 | Aerospace; hexagon bolts, close tolerance, with MJ-thread, short thread, steel, nominal tensile stregth 1100 MPa, for temperatures up to 235 °C |
| DIN 65528-2005 | 航空航天系列.钢制自锁紧、带深沉孔、凸缘和MJ螺纹的十二角螺母.等级:1550MPa/1800MPa/235℃ | Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1550 MPa/1800 MPa/235 °C |
| DIN 65529-2005 | 航空航天系列.钢制自锁紧、带深沉孔、凸缘和MJ螺纹的十二角螺母.等级:1250MPa/235℃ | Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1250 MPa/235 °C |
| DIN 65530-2006 | 航空航天.耐腐蚀刚制自锁紧深埋头孔的带凸缘和MJ螺纹的十二角螺母.等级:1550 MPa/315℃/425℃ | Aerospace - Nuts, bihexagonal with flange and MJ thread, deep counterbore, self-locking, corrosion-resisting steel, classification: 1550 MPa/315 °C/425 °C |
| DIN 65531-2005 | 航空航天系列.耐腐蚀钢制自锁紧、带深沉孔、凸缘和MJ螺纹的十二角螺母.等级:1250 MPa/315 鳦/425 鳦 | Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting, steel, class: 1250 MPa/315 °C/425 °C |
| DIN 65532-1984 | 航空和航天.符合DIN ISO 5855的MJ螺纹的螺纹尾、空刀槽和螺纹头 | Aerospace; runouts, undercuts and thread ends for MJ-threads to DIN ISO 5855 |
| DIN 65533-1987 | 航空航天.螺栓、螺钉和螺母.材料的分配及表面处理.推荐性选择 | Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection |
| DIN 65534-1992 | 航空航天.耐蚀钢制MJ螺纹的六角头螺母.等级:1100/650℃ | Aerospace; nuts, hexagon, with MJ-thread, corrosion resisting steel; classification: 1100 MPa/650 °C |
| DIN 65535-1986 | 航空航天.耐腐蚀钢制带MJ螺纹的自锁螺母多槽螺母组件.螺母间距为固定的或可选的.等级:1100MPa/315℃ | Aerospace; gang channel nut assembly, with self-locking nuts with MJ thread, nut spacing fixed or optional, in corrosion-resisting steel; class: 1100 MPa/315 °C |
| DIN 65536-1-1986 | 航空航天.铜合金用螺纹锁紧的螺纹衬套.等级:1100MPa/425℃ | Aerospace; inserts, helical coil threads, screw-locking, copper alloy; class: 1100 MPa/425 C |
| DIN 65536-2-1986 | 航空航天.铜合金用螺纹锁紧的螺纹衬套.组件和专用工具 | Aerospace; inserts, helical coil threads, screw-locking, copper alloy; assembly and special tools |
| DIN 65537-1987 | 航空航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制短长度MJ螺纹的带双六角套筒的凸圆头螺 | Aerospace; cheese head bolts with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65538-1987 | 航空和航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制短长度MJ螺纹的带双六角套筒的紧公差 | Aerospace; cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65541-1987 | 航空和航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制全攻螺纹的MJ螺纹的带有筋状翼形的扭 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65542-1987 | 航空航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制短螺纹长度MJ螺纹的带有筋状翼形的扭矩 | Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, nickel alloy, nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65546-2005 | 航空航天系列.耐腐蚀钢制自锁紧、带深沉孔、凸缘和MJ螺纹的十二角螺母.等级:1100 MPa/315 鳦/425 鳦 | Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting steel, class: 1100 MPa/315 °C/425 °C |
| DIN 65547-1987 | 航空航天.钛合金制米制系列凸头紧公差铆钉 | Aerospace; rivets, close tolerance, with protruding head, metric series, titanium alloy |
| DIN 65548-1987 | 航空航天.钛合金制米制系列100°平头紧公差铆钉 | Aerospace; rivets, close tolerance with 100° flush head, metric series, titanium alloy |
| DIN 65549-1987 | 航空航天.钛合金制米制系列130°埋头紧公差铆钉 | Aerospace; rivets, close tolerance with 130° flush head, metric series, titanium alloy |
| DIN 65550-1987 | 航空航天.钛制米制系列带法兰的钉杆套 | Aerospace; flanged collars, metric series, titanium |
| DIN 65551-1988 | 航空航天.米制系列的耐蚀钢制带芯杆的100°小埋头盲铆钉 | Aerospace; blind rivets with 100° reduced countersunk head, metric series, corrosion-resisting steel, with mandrel |
| DIN 65552-1993 | 航空航天.米制系列带铆钉芯杆的耐蚀钢100°沉头盲铆钉 | Aerospace; blind rivets with 100° countersunk head, corrosion-resisting steel, with mandrel, metric series |
| DIN 65553-2001 | 航空航天.MJ螺纹铆接螺母用无孔金属垫片，不适用于新设计 | Aerospace - Shims, without hole, for anchor nuts with MJ thread; Not to be used for new designs |
| DIN 65554-1987 | 航空航天.公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制短长度MJ螺纹的带有筋状翼形扭矩调节十字槽 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65555-1987 | 航空航天.公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制短长度MJ螺纹的六角头螺栓. | Aerospace; hexagon bolts with short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65557-1989 | 航空和航天.公称抗拉强度1100MPa.使用温度在315℃以下钛合金制全攻螺纹MJ螺纹的带肋翼的扭矩调节十字槽盘头 | Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65558-1989 | 航空航天.公称抗拉强度1100MPa.使用温度在315℃以下钛合金制全攻螺纹MJ螺纹的带肋翼的扭矩调节十字槽沉头螺 | Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65559-1991 | 航空航天.纤维增强的塑料.多向层压板的试验.缺口孔抗拉强度的测定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of open-hole tensile strength |
| DIN 65560-1991 | 航空航天.纤维增强的塑料.多向层压板的试验.已填充孔抗压强度的测定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of filled-hole compressive strength |
| DIN 65561-1991 | 航空航天.纤维增强的塑料.多向层压板的试验.冲击试验负荷后抗压强度的测定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of compressive strength after impact test |
| DIN 65562-1991 | 航空航天.纤维增强的塑料.多向层压板的试验.支承强度的测定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of bearing strength |
| DIN 65564-1992 | 航空航天.增强纤维.用HPLC法对碳素长丝纱、织物和短切原丝的浆成份进行定性测定 | Aerospace; reinforcement fibres; qualitative determination of size constituents of carbon filament yarns, woven fabrics and chopped strands by HPLC |
| DIN 65565-1992 | 航空航天.增强纤维.用红外分光法对碳素长丝纱、织物和短切原丝的浆类型进行定性试验 | Aerospace; reinforcement fibres; qualitative testing of size type of carbon filament yarns, woven fabrics and chopped strands by infrared spectroscopy |
| DIN 65566-1992 | 航空航天.增强纤维.碳素长丝纱、织物和短切原丝的浆含量的测定 | Aerospace; reinforcement fibres; determination of size content of carbon filament yarns, woven fabrics and chopped strands |
| DIN 65567-1992 | 航空航天.增强纤维.芳族聚酰胺长丝纱,织物和短切原丝的整理剂含量的测定 | Aerospace; reinforcement fibres; determination of finish content of aramid filament yarns, woven fabrics and chopped strands |
| DIN 65568-1992 | 航空航天.增强纤维.碳素长丝纱、织物和短切原丝的耐热氧化性能的测定 | Aerospace; reinforcement fibres; determination of thermal oxidative resistance of carbon filament yarns, woven fabrics and short cuts |
| DIN 65569-1-1992 | 航空航天.增强纤维.复丝纱密度的测定.悬浮法 | Aerospace; reinforcement fibres; determination of density of filament yarns; sink-float method |
| DIN 65569-2-1992 | 航空航天.增强纤维.复丝纱密度的测定.流体比重秤量法 | Aerospace; reinforcement fibres; determination of density of filament yarns; hydrostatic weighing method |
| DIN 65570-1990 | 航空航天.热处理设施.一般要求 | Aerospace; heat treatment facilities; general requirements |
| DIN 65571-1-1992 | 航空航天.增强纤维.复丝纱横截面面积和复丝纱直径的测定.计算方法 | Aerospace; reinforcement fibres; determination of filament diameter and cross-sectional area of filament yarns; calculation method |
| DIN 65571-2-1992 | 航空和航天.增强纤维.复丝纱直径的测定.纵向投影法 | Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; longitudinal projection method |
| DIN 65571-3-1992 | 航空航天.增强纤维.长丝纱的长丝直径、长丝横截面形状和横截面面积的测定.横磨测量 | Aerospace; reinforcement fibres; determination of filament diameter, cross-sectional shape and area of filament yarns; measurement of transverse micro-section |
| DIN 65571-4-1992 | 航空航天.增强纤维.复丝纱的长丝直径的测定.激光干涉测量法 | Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; laser interferometry |
| DIN 65572-1992 | 航空航天.碳纤维和无活性热塑塑料制单向片材和带材的预浸料.技术规范 | Aerospace; unidirectional sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification |
| DIN 65574-1993 | 航空航天.标牌.设计指导 | Aerospace; nameplates; directions for design |
| DIN 65576-1991 | 航空航天.带自限动凸轮杆释放机构的单锁定耐蚀钢快卸销 | Aerospace; quick-release pins in corrosion-resisting steel, single locked, with self-retaining cam lever release mechanism |
| DIN 65578-1991 | 航空航天.带推或拉释放机构的单锁定装置耐蚀钢快卸销 | Aerospace; quick-release pins in corrosion-resisting steel, single locked, with pull or push release mechanism |
| DIN 65581-1992 | 航空航天.米制系列的钛合金制紧公差铆钉和纯钛销套.技术规范 | Aerospace; titanium-alloy close-tolerance rivets and pure-titanium collars, metric series; technical specification |
| DIN 65582-1990 | 航空航天.铝和镁合金铸件的热处理 | Aerospace; heat treatment of aluminium- and magnesium-alloy castings |
| DIN 65583-1999 | 航空航天.纤维增强塑料.动态负荷下纤维复合材料的玻璃化转变的测定 | Aerospace - Fibre reinforced materials - Determination of glass transition of fibre composites under dynamic load |
| DIN 65587-1992 | 航空航天.织物带.技术规范 | Aerospace; webbing; technical specification |
| DIN 65590-1992 | 航空航天.编织绳索.技术规范 | Aerospace; braided cord; technical specification |
| DIN 65591-1998 | 航空航天.非涂层的宽幅织物.技术规范 | Aerospace - Broad woven fabric, uncoated - Technical specification |
| DIN 65594-1993 | 航空和航天.英制系列盘头实心铆钉的铆钉上头 | Aerospace; closing heads for solid rivets, pan head, inch based series |
| DIN 65595-1993 | 航空航天.米制系列盘头实心铆钉的铆钉上头 | Aerospace; closing heads for solid rivets; pan head, metric series |
| DIN 65597-1993 | 航空航天.纤维增强塑料.放热反应时温差的测定 | Aerospace; fibre reinforced plastics; determination of temperature difference on exothermic reaction |
| DIN 65598-1993 | 航空航天.纤维增强塑料.层压制品裂纹频度的测定 | Aerospace; fibre reinforced plastics; determination of cracking frequency on laminates |
| DIN 65603-1982 | 航空和航天.钻模上9.9mm以下的钻孔色标 | Aerospace; colour identification of holes up to 9,9 mm on drilling jigs |
| DIN 65604-1988 | 航空航天.专用检验装置.颜色标识 | Aerospace; special gauging facilities; colour identification |
| DIN 65629-1993 | 航空航天.碳纤维和非活性热塑塑料制预浸渍纤维薄板材和带材. 技术规范 | Aerospace; fabric sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification |
| DIN 65668-1998 | 航空航天系列.为颗粒计数对油料进行的稀释 | Aerospace series - Dilution of oils for the purpose of particles counting |
| DIN 65669-1-1996 | 航空航天系列.用过的液体过滤器元件污染情况测定方法.第1部分:用材料试样作污染颗粒称重 | Aerospace series - Methods for determining the contamination of used fluid filter elements - Part 1: Gravimetric determination of particulate contamination by taking material samples |
| DIN 65673-1999 | 航空航天.纤维增强塑料.纱疵,织疵和预浸渍体疵点的定义 | Aerospace - Fibre reinforced plastics - Description of yarn, fabric and prepreg defects |
| DIN 65736-1-1984 | 航空航天.材料1.1174.7和1.4544.9单向剪切沉头螺栓静载荷的螺栓计算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt materials 1.1174.7 and 1.4544.9 |
| DIN 65736-3-1984 | 航空和航天.材料1.7220.5单向剪切沉头螺栓静载荷的螺栓计算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.7220.5 |
| DIN 65736-5-1984 | 航空航天.材料1.4944.4和1.7734.5单向剪切沉头螺栓静载荷的螺栓计算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt materials 1.4944.4 and 1.7734.5 |
| DIN 65736-7-1984 | 航空航天.材料1.6604.6单向剪切沉头螺栓静载荷的螺栓计算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.6604.6 |
| DIN 9003-1-1984 | 航空航天.钢制和耐热合金的薄板、板材和带材的弯曲、弯曲半径、设计指导说明 | Aerospace; bending of sheets, plates and strips of steel and heat-resisting alloys, bending radii, directions for design |
| DIN 9003-3-1994 | 航空航天.轻金属板材和带材的弯曲.第3部分:弯曲半径.设计说明 | Aerospace - Bending of light metal sheets and strips - Part 3: Bending radii, directions for design |
| DIN 9003-5-1986 | 航空航天.轻金属薄板材和带材的弯曲.尺寸、极限偏差、补偿值 | Aerospace; bending of light metal sheet and strip; dimensions, limit deviations and compensation values |
| DIN 9003-6-1992 | 航空航天.薄板材和带材的弯曲.钻头孔.角结构 | Aerospace; bending of sheet and strip; stop-drill holes, corner configurations |
| DIN 9004-1985 | 航空航天.管弯曲半径.冷加工用近似值 | Aerospace; bending radii for tubes; approximate values for cold working |
| DIN 9015-1-1986 | 航空航天.飞机结构的ISO配合(滚柱轴承的安装除外) | Aerospace; ISO-fits for airframe construction (except mounting of roller bearings) |
| DIN 9015-2-1986 | 航空航天.发动机结构的ISO配合(滚柱轴承的安装除外) | Aerospace; ISO-fits for engine construction (except mounting of roller bearings) |
| DIN 9020-1-1983 | 航空航天.比空气重的飞机的质量分解.主要质量组和质量术语.一般说明 | Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; survey |
| DIN 9020-2-1983 | 航空航天.比空气重的飞行器的质量分解.质量的主要分组与质量术语、定义 | Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; definitions |
| DIN 9020-3 Bb.1-1983 | 航空和航天.比空气重的飞机的质量分解.组质量说明.压缩版 | Aerospace; mass breakdown for aircraft heavier than air; group mass statement; condensed version |
| DIN 9020-3-1983 | 航空和航天.比空气重的飞机的质量分解.分组分质量说明 | Aerospace; mass breakdown for aircraft heavier than air; group mass statement |
| DIN 9020-4-1983 | 航空和航天.比空气重的飞行器的质量分解.详细质量说明 | Aerospace; mass breakdown for aircraft heavier than air; detail mass statement |
| DIN 9020-5-1992 | 航空航天.比空气重的飞行器的质量详细分解.尺寸和结构数据 | Aerospace; mass breakdown for aircraft heavier than air; dimensional and construction data |
| DIN 9066-1980 | 航空和航天.外部电源连接.布线图 | Aerospace; external power connection, wiring diagrams |
| DIN 9088-2002 | 航空航天系列.橡胶制品的储存寿命 | Aerospace series - Storage life of rubber products |
| DIN 9118-1-1987 | 航空航天.第1部分:铆钉孔 | Aerospace; rivet holes |
| DIN 9119-2-1985 | 航空航天.铆接.铆钉间的距离和铆钉排的间距 | Aerospace; riveting; distances between rivets and distances between rows |
| DIN 9122-1978 | 航空和航天.软泡沫料.石棉(温石棉)板.尺寸 | Aerospace; soft foam, sheets of asbestos (Chrysotil), dimensions |
| DIN 9254-2-1986 | 航空航天.配电箱和设备用 600V 200 ℃ 单芯铜导线.第2部分:技术规范 | Aerospace; single conductor wires, with copper conductor for connector boxes and equipment, 600 Volt, 200 C; technical specification |
| DIN 9300-1-1990 | 航空航天.飞行力学的概念、数值和符号.第1部分:飞机相对于空气的运动; ISO 1151-1:1988 修订版 | Aerospace; concepts, quantities and symbols for flight dynamics; aircraft motion relative to the air; ISO 1151-1:1988 modified |
| DIN 9300-2-1990 | 航空航天.飞行力学的概念、数值和符号.第2部分:飞机相对于地面的运动和大气: ISO 1151-2:1985 (版本地位止 | Aerospace; concepts, quantities and symbols for flight dynamics; motions of the aircraft and the atmosphere relative to the earth; ISO 1151-2:1985 (status as of 1987) modified |
| DIN 9300-6-1990 | 航空航天.管.概念.飞行动力学的量值和符号.飞行器的几何结构 | Aerospace; concepts, quantities and symbols for flight dynamics; aircraft geometry; ISO 1151-6:1982 (status as of 1984) modified |
| DIN 9370-1985 | 航空和航天.管子.压力术语分类.计算和设计标准 | Aerospace; tubes; classification, pressure terms; calculation and design criteria |
| DIN 9430-1-1984 | 航空航天.轻金属半成品的取样.锻造铝合金、钛和钛合金.概述 | Aerospace; sampling of semi-finished products in light metals; wrought aluminium alloys, titanium and titanium alloys; general |
| DIN 9430-2-1984 | 航空航天.轻金属半成品的取样.锻造铝合金 | Aerospace; sampling of semi-finished products in light metals; wrought aluminium alloys |
| DIN 9430-3-1984 | 航空航天.轻金属半成品的取样.钛和钛合金 | Aerospace; sampling of semi-finished products in light metals; titanium and titanium alloys |
| DIN 9462-1987 | 航空航天.软管组件.测量 | Aerospace; hose assemblies; survey |
| DIN EN 13290-1-1999 | 航空航天系列.航天项目管理.一般要求.第1部分:政策和原则 | Aerospace series - Space project management; General requirements - Part 1: Policy and principles; German version EN 13290-1:1999 |
| DIN EN 13290-2-2002 | 航空航天.航天项目管理.一般要求.第2部分:项目分解结构; 德文和英文版本 EN 13290-2:2001 | Aerospace - Space project management; General requirements - Part 2: Project breakdown structure; German and English version EN 13290-2:2001 |
| DIN EN 13290-3-2002 | 航空航天.航天项目管理.一般要求.第3部分:项目组织; 德文和英文版本 EN 13290-3:2001 | Aerospace - Space project management; General requirements - Part 3: Project organisation; German and English version EN 13290-3:2001 |
| DIN EN 13290-4-2002 | 航空航天.航天项目管理.一般要求.第4部分:项目分阶段和计划; 德文和英文版本 EN 13290-4:2001 | Aerospace - Space project management; General requirements - Part 4: Project phasing and planning; German and English version EN 13290-4:2001 |
| DIN EN 13290-5-2002 | 航空航天.航天项目管理.一般要求.第5部分:配置管理; 德文和英文版本 EN 13290-5:2001 | Aerospace - Space project management; General requirements - Part 5: Configuration management; German and English version EN 13290-5:2001 |
| DIN EN 13290-6-2002 | 航空航天.航天项目管理.一般要求.第6部分:信息/文件管理; 德文和英文版本 EN 13290-6:2001 | Aerospace - Space project management; General requirements - Part 6: Information/documentation management; German and English version EN 13290-6:2001 |
| DIN EN 13290-7-2002 | 航空航天.航天项目管理.一般要求.第7部分:成本和进度管理; 德文和英文版本 EN 13290-7:2001 | Aerospace - Space project management; General requirements - Part 7: Cost and schedule management; German and English version EN 13290-7:2001 |
| DIN EN 13291-1-1999 | 航空航天系列.航天产品保证.一般要求.第1部分:政策和原则 | Aerospace series - Space products assurance; General requirements - Part 1: Policy and principles; German version EN 13291-1:1999 |
| DIN EN 13291-3-2005 | 航天产品保证.一般要求.第3部分:材料、机械部件和工序 | Space product assurance - General requirements - Part 3: Materials, mechanical parts and processes; German version EN 13291-3:2003 |
| DIN EN 13292-1999 | 航空航天系列.航天工程标准.政策和原则 | Aerospace series - Space engineering standards; Policy and principles; German version EN 13292:1999 |
| DIN EN 13701-2002 | 航空航天.航天系统.术语词汇; 三国语言版本 EN 13701:2001 | Aerospace - Space systems - Glossary of terms; Trilingual version EN 13701:2001 |
| DIN EN 14089-2003 | 航空航天.航天产品保障.有限寿命材料的控制 | Aerospace - Space product assurance - The control of limited-life materials; German and English version EN 14089:2002 |
| DIN EN 14090-2002 | 航空航天.航天产品保证.航天材料筛选用易燃性试验; 德文英文版本 EN 14090:2002 | Aerospace - Space product assurance - Flammability testing for the screening of space materials; German and English version EN 14090:2002 |
| DIN EN 14091-2003 | 航空航天.航天产品保证.航天材料热真空除气筛选试验 | Aerospace - Space product assurance - Thermal vacuum outgassing test for the screening of space materials; German and English version EN 14091:2002 |
| DIN EN 14092-2003 | 航天工程.航天环境 | Space engineering - Space environment; German version EN 14092:2002 |
| DIN EN 14093-2003 | 航空航天.航天项目管理.审查的组织和实施 | Aerospace - Space project management - Organization and conduct of reviews; German and English version EN 14093:2002 |
| DIN EN 14097-2002 | 航空航天.航天产品保证.不合格控制系统 | Aerospace - Space product assurance - Nonconformance control system; German and English version EN 14097:2001 |
| DIN EN 14098-2002 | 航空航天.航天产品保证.筛选航天材料和工艺的热循环试验 | Aerospace - Space product assurance - Thermal cycling test for the screening of space materials and processes; German and English version EN 14098:2001 |
| DIN EN 14099-2002 | 航空航天.航天产品保证.带压敏胶粘带的涂层和装饰层的剥离和拉脱强度的测量; 德文和英文版本 EN 14099:2001 | Aerospace - Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes with pressure-sensitive tapes; German and English version EN 14099:2001 |
| DIN EN 14100-2002 | 航空航天.航天产品保证.载人航天器座舱材料和装配物品废品的确定 | Aerospace - Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment; German and English version EN 14100:2001 |
| DIN EN 14101-2002 | 航空航天.航天产品保证.控制应力腐蚀裂纹材料的选择 | Aerospace - Space product assurance - Material selection for controlling stress-corrosion cracking; German and English version EN 14101:2001 |
| DIN EN 14160-2002 | 航空航天.航天工程.软件; 德文和英文版本 EN 14160:2001 | Aerospace - Space engineering - Software; German and English version EN 14160:2001 |
| DIN EN 14514-2004 | 航天工程标准.功能分析 | Space engineering standards - Functional analysis; German and English version EN 14514:2004 |
| DIN EN 14607-8-2005 | 航天工程.机械.第8部分:材料 | Space engineering - Mechanical - Part 8: Materials; English version EN 14607-8:2004 |
| DIN EN 14612-2004 | 航天产品保证.自动机器波钎焊的检验和验收 | Space product assurance - Verification and approval of automatic machine wave soldering; German version EN 14612:2003 |
| DIN EN 14724-2005 | 航天项目管理.航天标准的改编 | Space project management - Tailoring of space standards; German version EN 14724:2003 |
| DIN EN 14725-2005 | 航空航天工程.检定 | Space engineering - Verification; German and English version EN 14725:2003 |
| DIN EN 14736-2004 | 航天产品保证.试验中心质量保证 | Space product assurance - Quality assurance for test centres; German version EN 14736:2004 |
| DIN EN 14737-1-2004 | 航天工程.地面系统和操作.第1部分:原则和要求 | Space engineering - Ground systems and operations - Part 1: Principles and requirements; German version EN 14737-1:2004 |
| DIN EN 14737-2-2005 | 航天工程.地面系统和操作.第2部分:文件要求定义(DRDs) | Space engineering - Ground systems and operations - Part 2: Documents requirements definitions (DRDs); English version EN 14737-2:2004 |
| DIN EN 14777-2005 | 航天工程.Multipaction设计和试验 | Space engineering - Multipaction design and test; English version EN 14777:2004 |
| DIN EN 14824-2005 | 航天工程.检验 | Space engineering - Testing; English version EN 14824:2003 |
| DIN EN 2000-1992 | 航空航天.EN航空航天业产品的质量保证.制造商质量保证体系的批准 | Aerospace series; quality assurance, EN aerospace products, approval of the quality system of manufacturers; german version EN 2000:1991 |
| DIN EN 2002-001 Berichtigung 1-2007 | 航空航天系列.金属材料.试验方法.第1部分:环境温度下的抗拉测试 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature; German and English version EN 2002-001:2005, Corrigenda to DIN EN 2002-001:2006-11 |
| DIN EN 2002-001-2006 | 航天航空系列.金属材料.试验方法.第1部分:室温下抗拉试验 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature; German and English version EN 2002-001:2005 |
| DIN EN 2002-002 Berichtigung 1-2007 | 航空航天系列.金属材料.试验方法.第2部分:升温抗拉测试 | Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005, Corrigenda to DIN EN 2002-002:2006-11 |
| DIN EN 2002-002-2006 | 航天航空系列.金属材料.试验方法.第2部分:高温下抗拉试验 | Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005 |
| DIN EN 2003-009-2007 | 航空航天系列.试验方法.钛和钛合金.第009部分:表面污染物的测定 | Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination; German and English version EN 2003-009:2007 |
| DIN EN 2003-010-2007 | 航空航天系列.钛和钛合金.试验方法.第010部分:氢含量测定用取样 | Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content; German and English version EN 2003-010:2007 |
| DIN EN 2004-1-1993 | 航空航天系列.铝和铝合金制品的检验方法.第1部分：锻铝合金导电率的测定 | Aerospace series; test methods for aluminium and aluminium alloy products; part 1: determination of electrical conductivity of wrought aluminium alloys; German version EN 2004-1:1993 |
| DIN EN 2004-5-1993 | 航空和航天.铝和铝合金产品的检验方法.第5部分：电镀半成品时测定镀层厚度和铜渗析 | Aerospace series; test methods for aluminium and aluminium alloy products; part 5: determination of cladding thickness and copper diffusion of clad semi-finished products; German version EN 2004-5:1993 |
| DIN EN 2009-1995 | 航空航天.机体用轴承.钢制刚性单列滚珠轴承.直径系列 8 和直径系列 9.尺寸和负载.新设计停止使用; 德文版本 | Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 8 and 9 - Dimensions and loads; inactive for new design; German version EN 2009:1984 |
| DIN EN 2011-1995 | 航空航天.机体用轴承.耐腐蚀钢刚性单列滚珠轴承.直径系列 8 和直径系列 9.尺寸和负载.新设计停止使用; 德文 | Aerospace - Bearings-airframe rolling, rigid single row ball bearings in corrosion resisting steel; diameter series 8 and 9 - Dimensions and loads; inactive for new design; German version EN 2011:1984 |
| DIN EN 2012-1995 | 航空航天.机体用轴承.钢制钢性单列滚珠轴承.直径系列 0 和直径系列 2.尺寸和负载.新设计停止使用; 德文版本 | Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2012:1984 |
| DIN EN 2014-1995 | 航空航天.机体用轴承.耐腐蚀钢刚性单列滚珠轴承.直径系列 0 和直径系列 2.尺寸和负载.新设计停止使用; 德文 | Aerospace - Bearings-airframe rolling, rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2014:1984 |
| DIN EN 2015-1995 | 航空航天.机体用轴承.钢制双列自定心滚珠轴承.直径系列 2.尺寸和负载.新设计停止使用; 德文版本 EN 2015:19 | Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2015:1984 |
| DIN EN 2017-1995 | 航空航天.机体用轴承.耐腐蚀钢双列自定心滚珠轴承.直径系列 2.尺寸和负载.新设计停止使用; 德文版本 EN 201 | Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in corrosion resisting steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2017:1984 |
| DIN EN 2018-1995 | 航空航天.机体用轴承.钢制单列自定心滚柱轴承.直径系列 3 和直径系列 4.尺寸和负载.新设计停止使用; 德文版 | Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2018:1984 |
| DIN EN 2020-1995 | 航空航天.机体用滚动轴承.耐腐蚀钢单列自定心滚柱轴承.直径系列 3 和直径系列 4.尺寸和负载.新设计停止使用 | Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in corrosion resisting steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2020:1984 |
| DIN EN 2022-1989 | 航空航天.轻型系列、带自润滑内衬的耐蚀钢制关节轴承.尺寸和负荷 | Aerospace; bearings, spherical plain, in corrosion resisting steel, with self-lubricating liner, light series; dimensions and loads |
| DIN EN 2023-1989 | 航空航天.公称系列、带自润滑内衬的耐蚀钢制关节轴承.尺寸和负荷 | Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liner, normal series; dimensions and loads |
| DIN EN 2032-1-2003 | 航空航天系列.金属材料.第1部分:常规命名 | Aerospace series - Metallic materials - Part 1: Conventional designation; German and English version EN 2032-1:2001 |
| DIN EN 2032-2-1994 | 航空航天系列.金属材料.第2部分:供货状态下冶金状态标志 | Aerospace series; metallic materials; part 2: coding of metallurgical condition in delivery condition; German version EN 2032-2:1994 |
| DIN EN 2044-2003 | 航空航天系列.公差等级h11、直径4mm D 63mm的铝及铝合金拉制圆棒材. 尺寸 | Aerospace series - Round bars, drawn, in aluminium and aluminium alloys, tolerance class h11, diameter 4 mmD63 mm - Dimensions; German and English version EN 2044:2001 |
| DIN EN 2045-2003 | 航空航天系列.公差等级h11、厚度6mm a 50mm的铝及铝合金拉制方棒.尺寸 | Aerospace series - Square bars, drawn, in aluminium and aluminium alloys, tolerance class h11, thickness 6 mma50 mm - Dimensions; German and English version EN 2045:2001 |
| DIN EN 2046-2003 | 航空航天系列.公差等级h11.对边宽度7mm a 50mm的铝及铝合金拉制六角形棒材.尺寸 | Aerospace series - Hexagonal bars, drawn, in aluminium and aluminium alloys, tolerance class h11, width across flats 7 mma50 mm - Dimensions; German and English version EN 2046:2001 |
| DIN EN 2047-2002 | 航空航天系列.铝合金挤制粒状L形型材.尺寸 | Aerospace series - Beaded L-section, extruded in aluminium alloys - Dimensions; German and English version EN 2047:2001 |
| DIN EN 2048-2002 | 航空航天系列.铝合金L形挤压型材.尺寸 | Aerospace series - Extruded L-section, extruded in aluminium alloys - Dimensions; German and English version EN 2048:2001 |
| DIN EN 2049-2002 | 航空航天系列.铝合金挤制槽形型材.尺寸 | Aerospace series - Extruded channel section, exruded in aluminium alloys - Dimensions; German and English version EN 2049:2001 |
| DIN EN 2050-2002 | 航空航天系列.铝合金挤制T形型材.尺寸 | Aerospace series - Extruded T-section, in aluminium alloys - Dimensions; German and English version EN 2050:2001 |
| DIN EN 2063-1995 | 航空航天系列.机体用滚动轴承.技术规范.新设计停止使用; 德文版本 EN 2063:1992 | Aeorspace series - Airframe rolling bearings - Technical specification; inactive for new design; German version EN 2063:1992 |
| DIN EN 2064-1992 | 航空航天.带润滑衬套的不锈钢关节轴承.技术规范 | Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992 |
| DIN EN 2066-2003 | 航空航天系列.铝合金挤压型材.通用公差 | Aerospace series - Extruded section in aluminium alloys - General tolerances; German and English version EN 2066:2001 |
| DIN EN 2067-1996 | 航空航天系列.带自动调心球轴承的吊环端头.交货技术条件 | Aerospace series - Rod ends with self-aligning ball bearings - Technical specification; German version EN 2067:1996 |
| DIN EN 2068-1996 | 航空航天系列.带关节轴承和自润滑涂层的吊环端头.交货技术条件 | Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996 |
| DIN EN 2070-1-1990 | 航空航天.精制铝和铝合金制品.技术规范.第1部分:一般要求; 德文版本 EN 2070-1:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements; german version EN 2070-1:1989 |
| DIN EN 2070-1/A1-1993 | 航空航天系列.铝和铝合金锻造产品.技术规范.第1部分:一般要求 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements; German version EN 2070-1/A1:1993; amendment 1 |
| DIN EN 2070-2-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第2部分:薄板、带材、型材和板材; 德文版本 EN 2070-2:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 2: sheet, strip formed profiles and plate; german version EN 2070-2:1989 |
| DIN EN 2070-3-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第3部分:棒材和型材; 德文版本 EN 2070-3:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 3: bar and section; german version EN 2070-3:1989 |
| DIN EN 2070-4-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第4部分:结构管材; 德文版本 EN 2070-4:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 4: tube for structures; german version EN 2070-4:1989 |
| DIN EN 2070-5-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第5部分:受压管材; 德文版本 EN 2070-5:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 5: tube used under pressure; german version EN 2070-5:1989 |
| DIN EN 2070-6-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第6部分:铆钉用丝材; 德文版本 EN 2070-6:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 6: rivet wire; german version EN 2070-6:1989 |
| DIN EN 2070-7-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第7部分:精锻坯料; 德文版本 EN 2070-7:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 7: wrought forging stock; german version EN 2070-7:1989 |
| DIN EN 2071-2003 | 航空航天系列.厚度0.25mm a 6mm的铝及铝合金板材.尺寸 | Aerospace series - Sheets in aluminium and aluminium alloys, thickness 0,25 mma6 mm - Dimensions; German and English version EN 2071:2001 |
| DIN EN 2072-2007 | 航空航天系列.AL-P1050A-H14铝合金.薄板与带材.0.4≥a≥6mm | Aerospace series - Aluminium AL-P1050A-H14 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2072:2005 |
| DIN EN 2076-1-1990 | 航空航天.铝.镁合金铸件和铸锭.技术规范.第1部分:一般要求 | Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements; german version EN 2076-1:1989 |
| DIN EN 2076-1/A1-1993 | 航空航天系列.铝和镁合金锭和铸件.技术规范.第1部分:一般要求 | Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements; German version EN 2076-1/A1:1993; amendment 1 |
| DIN EN 2076-2-1990 | 航空航天.铝.镁合金铸件和铸锭.交货技术条件.第2部分:再熔炼用铸锭 | Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 2: ingots for remelting; german version EN 2076-2:1989 |
| DIN EN 2076-3-1990 | 航空航天.铝.镁合金铸件和铸锭.交货技术条件.第3部分:试制铸件和连铸件 | Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 3: pre-production and production castings; german version EN 2076-3:1989 |
| DIN EN 2078-2003 | 航空航天系列.金属材料.生产进度图表、检验进度图表、检验和试验报告;定义、总则、编制和批准 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report; Definition, general principles, preparation and approval; German and English version EN 2078:2001 |
| DIN EN 2079-1995 | 航空航天系列.仪器和设备用耐蚀钢带法兰的精密滚珠轴承.尺寸和负载; 德文版本 EN 2079:1995 | Aerospace series - Bearings, precision ball, with flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 2079:1995 |
| DIN EN 2082-1-1990 | 航空航天系列.铝合金锻坯和锻件.技术规范.第1部分:一般要求 | Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements; german version EN 2082-1:1989 |
| DIN EN 2082-1/A1-1993 | 航空航天系列.铝合金锻坯和锻件.技术规范.第1部分:一般要求 | Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements; German version EN 2082-1/A1:1993; amendment 1 |
| DIN EN 2082-2-1990 | 航空航天系列.铝合金锻造坯料和锻件.技术规范.第2部分:锻造坯料 | Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 2: forging stock; german version EN 2082-2:1989 |
| DIN EN 2082-3-1990 | 航空航天系列.铝合金锻造坯料和锻件.技术规范.第3部分:试生产和批生产锻件 | Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 3: preproduction and production forgings; german version EN 2082-3:1989 |
| DIN EN 2083-2001 | 航空航天系列.电缆用铜或铜合金导体.产品标准. | Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard; German version EN 2083:2001 |
| DIN EN 2084-2006 | 航空航天系列.一般用途的铜和铜合金导体单芯电缆.技术规范 | Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification; German and English version EN 2084:2005 |
| DIN EN 2085-2007 | 航空航天系列.AL-P2618A-T6型铝合金.自由锻件和模锻件.a≤150mm | Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a 150 mm; German and English version EN 2085:2004 |
| DIN EN 2086-2006 | 航空航天系列.铝合金AL-P2618A-T851.手锻和模锻件.a ≤150 mm | Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2086:2004 |
| DIN EN 2087-2006 | 航空航天系列.铝合金 AL-P2014A .T6 或T62.覆层铝合金板材及带材.0.4mm≤a≤6mm.德文和英文版本EN 2087-200 | Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 2087:2005 |
| DIN EN 2088-2007 | 航空航天系列.AL-P2014A-T4或T42型铝合金铠装薄材和带材.0.4mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 2088:2005 |
| DIN EN 2089-2007 | 航空航天系列.AL-P2014A-T6或T62型铝合金.薄板材和带材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2089:2005 |
| DIN EN 2090-2006 | 航空航天系列.铝合金AL-P2024-T3.覆层板材及带材.0.3mm≥a ≥6mm | Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm a 6 mm; German and English version EN 2090:2005 |
| DIN EN 2092-2006 | 航空航天系列.AL-P7075-T6或T62铝合金.层覆薄板及带材.0.4mm<=a<=6mm | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2092:2005 |
| DIN EN 2093-1993 | 航空航天.AL-P709-T74铝合金.20mm≤a≤150mm.手制锻件. | Aerospace series; aluminium alloy AL-P7009-T74; hand forgings 20 mm a 150 mm; German version EN 2093:1992 |
| DIN EN 2094-1993 | 航空航天.AL-P7009-T74铝合金.3mm≤a≤150mm模锻件 | Aerospace series; aluminium alloy AL-P7009-T74; die forgings 3 mm a 150 mm; German version EN 2094:1992 |
| DIN EN 2100-1992 | 航空航天.AL-P2014A-T4511铝合金.a或D≤200mm 的挤压棒材和型材 | Aerospace series; aluminium alloy AL-P2014A-T4511; extruded bars and sections a or D 200 mm; german version EN 2100:1992 |
| DIN EN 2101-1991 | 航空航天.铝和锻铝合金的铬酸阳极氧化 | Aerospace series; chromic acid anodizing of aluminium and wrought aluminium alloys; german version EN 2101:1991 |
| DIN EN 2103-1-1991 | 航空航天系列.钢、镍基以及钴基合金重熔坯料和铸件.技术规范.第1部分:一般要求 | Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 1: general requirements; german version EN 2103-1:1991 |
| DIN EN 2103-2-1991 | 航空航天系列.钢、镍基以及钴基合金重熔坯料和铸件.技术规范.第2部分:重熔坯料 | Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 2: remelting stock; german version EN 2103-2:1991 |
| DIN EN 2103-3-1991 | 航空航天系列.钢、镍基以及钴基合金重熔坯料和铸件.技术规范.第3部分:试制铸件和批生产铸件 | Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 3: pre-production and production castings; german version EN 2103-3:1991 |
| DIN EN 2104-1996 | 航空航天系列.丙烯腈-丁二烯-橡胶(NBR).硬度:40 IRHD | Aerospace series - Acrylonitrile-butadiene elastomer (NBR) - Hardness 40 IRHD; German version EN 2104:1996 |
| DIN EN 2122-1996 | 航空航天系列.阳极处理和铬酸钝化铝合金平垫圈 | Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated; German version EN 2122:1996 |
| DIN EN 2126-1993 | 航空航天.AL-P7075-T651铝合金.6mm∠a≤800mm中厚板材 | Aerospace series; aluminium alloy AL-P7075-T651; plate 6 mm a 80 mm; German version EN 2126:1992 |
| DIN EN 2127-1993 | 航空航天.AL-P7075-T73511铝合金.a或D≤100mm的挤压棒材和型材 | Aerospace series; aluminium alloy AL-P7075-T73511; extruded bars and sections a or D 100 mm; German version EN 2127:1992 |
| DIN EN 2128-1993 | 航空航天.AL-P7075-T73511铝合金.6mm≤a或D≤75mm 拉制棒材 | Aerospace series; aluminium alloy AL-P7075-T73511; drawn bars 6 mm a or D 75 mm; German version EN 2128:1992 |
| DIN EN 2130-2002 | 航空航天系列.仪器和设备用耐腐蚀钢精密滚珠轴承.技术规范; 德文版本 EN 2130:2001 | Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification; German version EN 2130:2001 |
| DIN EN 2131-2003 | 航空航天系列.厚度6mm a 160mm的铝合金板.尺寸 | Aerospace series - Plates in aluminium alloys, thickness 6 mma160 mm - Dimensions; German and English version EN 2131:2001 |
| DIN EN 2133-1998 | 航空系列航天.抗拉强度≤1450 MPa的镀镉钢、铜、铜合金以及镍合金 | Aerospace series - Cadmium plating of steels with specified tensile strength 1450 MPa, copper, copper alloys and nickel alloys; German version EN 2133:1997 |
| DIN EN 2134-2003 | 航空航天系列.直径10mm D 220mm的铝及铝合金挤压圆棒材.尺寸 | Aerospace series - Round bars, extruded in aluminium and aluminium alloys, diameter 10 mmD220 mm - Dimensions; German and English version EN 2134:2001 |
| DIN EN 2138-2000 | 航空和航天系列.镀镉钢制平垫圈 | Aerospace series - Washers, flat, in steel, cadmium plated; German version EN 2138:1999 |
| DIN EN 2139-1989 | 航空航天.耐高温钢制扁平垫圈 | Aerospace; washers, flat, heat resisting steel; german version EN 2139:1989 |
| DIN EN 2143-1993 | 航空航天.英寸系列1050A铝制通用头实心铆钉 | Aerospace series; rivets, solid, universal head, in aluminium 1050A, inch based series; german version EN 2143:1992 |
| DIN EN 2144-1994 | 航空航天系列.英制系列铝合金 2117 通用头实心铆钉; 德文版本 EN 2144:1994 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series; German version EN 2144:1994 |
| DIN EN 2145-1994 | 航空航天系列.英制系列阳极氧化或铬酸钝化铝合金 2117 通用头全铆钉; 德文版本 EN 2145:1994 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series; German version EN 2145:1994 |
| DIN EN 2146-1993 | 航空航天系列.英寸系列2017A铝合金通用头实心铆钉 | Aerospace series; rivets, solid, universal head, in aluminium alloy 2017A, inch based series; german version EN 2146:1992 |
| DIN EN 2148-1993 | 航空航天系列.英寸系列5056A铝合金通用头实心铆钉 | Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A, inch based series; german version EN 2148:1992 |
| DIN EN 2149-1996 | 航空航天系列.英制系列5056A铝合金阳极氧化或铬酸钝化普通头实心铆钉 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodised or chromated, inch based series; German version EN 2149:1996 |
| DIN EN 2155-12-1997 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第12部分:线性热膨胀的测定 | Aerospace series - Test methods for transparent materials for aircraft glazing - Part 12: Determination of linear thermal expansion; German version EN 2155-12:1997 |
| DIN EN 2155-13-1993 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第13部分:负载下变形温度的测定 | Aerospace series; test methods for transparent materials for aircraft glazing; part 13: determination of temperature at deflection under load; German version EN 2155-13:1993 |
| DIN EN 2155-14-1993 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第14部分:1/10维卡特软化温度的测定 | Aerospace series; test methods for transparent materials for aircraft glazing; part 14: determination of the 1/10 vicat softening temperature; German version EN 2155-14:1993 |
| DIN EN 2155-19-1996 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第19部分:抗裂纹的测定 | Aerospace series - Test methods for transparent materials for aircraft glazing - Part 19: Determination of crace resistance; German version EN 2155-19:1996 |
| DIN EN 2155-2-1993 | 航空航天系列.飞行器窗玻璃用透明材料的试验方法.第2部分:吸水率测定 | Aerospace series; test methods for transparent materials for aircraft glazing; part 2: determination of water absorption; german version EN 2155-2:1993 |
| DIN EN 2155-21-1989 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第21部分:裂纹扩张抗力的测定 | Aerospace series; test methods for transparent materials for aircraft glazing; part 21: determination of resistance to crack propagation (K-factor); german version EN 2155-21:1989 |
| DIN EN 2155-3-1993 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第3部分:折射率的测定 | Aerospace series; test methods for transparent materials for aircraft glazing; part 3: determination of refractive index; German version EN 2155-3:1993 |
| DIN EN 2155-5-1989 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第5部分:可见光透射率测量 | Aerospace series; test methods for transparent materials for aircraft glazing; part 5: determination of visible light transmission; german version EN 2155-5:1989 |
| DIN EN 2155-7-1997 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第7部分:光偏移的测定 | Aerospace series - Test methods for transparent materials for aircraft glazing - Part 7: Determination of optical deviation; German version EN 2155-7:1997 |
| DIN EN 2155-8-1989 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第8部分:光畸变的测定 | Aerospace series; test methods for transparent materials for aircraft glazing; part 8: determination of optical distortion; german version EN 2155-8:1989 |
| DIN EN 2155-9-1989 | 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第9部分:浊度测定 | Aerospace series; test methods for transparent materials for aircraft glazing; part 9: determination of haze; german version EN 2155-9:1989 |
| DIN EN 2157-1-1993 | 航空航天.钢.锻坯和锻件.技术规范.第1部分:一般要求 | Aerospace series; steel; forging stock and forgings; technical specifications; part 1: general requirements; German version EN 2157-1:1993 |
| DIN EN 2157-2-1993 | 航空航天.钢.锻坯和锻件.技术规范.第2部分:锻坯 | Aerospace series; steel; forging stock and forgings; technical specification; part 2: forging stock; German version EN 2157-2:1993 |
| DIN EN 2157-3-1993 | 航空航天.钢.锻坯和锻件.交货技术条件.第3部分:预锻件和成批锻件 | Aerospace series; steel; forging stock and forgings; technical specification; part 3: pre-production and production forgings; German version EN 2157-3:1993 |
| DIN EN 2235-2007 | 航空航天系列.带外屏蔽套的单芯和多芯电缆 | Aerospace series - Single and multicore electrical cables, screened and jacketed; German and English version EN 2235:2006 |
| DIN EN 2236-1992 | 航空航天系列.合金钢的紧公差杆带头的抗剪销钉.技术规范 | Aerospace series; pins, shear, headed, close tolerance shank, alloy steel; technical specification; german version EN 2236:1992 |
| DIN EN 2243-1-2007 | 航空航天系列.非金属材料.结构胶粘剂.试验方法.第1部分:单面搭接剪切 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear; German and English version EN 2243-1:2005 |
| DIN EN 2243-2-2006 | 航空航天系列.非金属材料.结构胶粘剂.试验方法.第2部分:金属与金属间的剥离试验 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005 |
| DIN EN 2243-3-2006 | 航空航天系列.非金属材料.结构胶粘剂.试验方法.第3部分:金属蜂窝状夹芯材料的剥离试验 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core; German and English version EN 2243-3:2005 |
| DIN EN 2243-4-2006 | 航空航天系列.非金属材料.结构胶粘剂.试验方法.第4部分:金属与蜂窝芯平面的拉伸试验 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test; German and English version EN 2243-4:2005 |
| DIN EN 2243-5-2006 | 航空航天系列.非金属材料.结构胶粘剂.试验方法.第5部分:老化试验 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests; German and English version EN 2243-5:2005 |
| DIN EN 2243-6-2006 | 航空航天系列.非金属材料.结构胶粘剂.试验方法.第6部分:抗剪应力和剪切应变的测定 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005 |
| DIN EN 2256-2006 | 航空航天系列.铝合金AL-P2618A-T852.手锻和模锻件.a ≤150 mm | Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2256:2004 |
| DIN EN 2257-1997 | 航空和航天.铝和铝合金制结构圆管.直径6mm=<100mm,壁厚1mm=<6mm.尺寸 | Aerospace series - Circular tubes for structures in aluminium and aluminium alloys; diameter 6 mm D 100 mm, thickness 1 mm a 6 mm; dimensions; German version EN 2257:1997 |
| DIN EN 2258-1997 | 航空和航天.铝和铝合金制圆形管道.直径3.2mm=<100mm,壁厚0.6mm=<2.5mm.尺寸 | Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys; diameter 3,2 mm D 100 mm, thickness 0,6 mm a 2,5 mm; dimensions; German version EN 2258:1997 |
| DIN EN 2259-1995 | 航空航天系列.硅树脂橡胶(VMQ).硬度为 50 国际橡胶硬度标度; 德文版本 EN 2259:1995 | Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD; German version EN 2259:1995 |
| DIN EN 2260-1995 | 航空航天系列.硅树脂橡胶(VMQ).硬度为:60 国际橡胶硬度标度; 德文版本 EN 2260:1995 | Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995 |
| DIN EN 2261-1995 | 航空航天系列.硅树脂橡胶(VMQ).硬度为:70 国际橡胶硬度标度; 德文版本 EN 2261:1995 | Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995 |
| DIN EN 2262-1995 | 航空航天系列.高撕裂强度的硅树脂橡胶(VMQ/PVMQ).硬度为:50 国际橡胶硬度标度; 德文版本 EN 2262:1995 | Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD; German version EN 2262:1995 |
| DIN EN 2264-1996 | 航空航天系列.合金钢镀镉MoS2润滑带各种深度圆柱形沉头孔双面法兰活动式自锁铆接螺母.等级:900MPa(室温)/23 | Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2264:1996 |
| DIN EN 2267-002-2006 | 航空航天系列.一般用途的电缆.-55°C和260°C之间的操作温度.第002部分:总则 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General; German and English version EN 2267-002:2005 |
| DIN EN 2267-003-2006 | 航空航天系列.一般用途的电缆.-55°C和260°C之间的操作温度.第003部分:喷墨可打印.产品标准 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 003: Ink jet printable - Product standard; German and English version EN 2267-003:2005 |
| DIN EN 2267-007-2006 | 航空航天系列.一般用途的电缆.-55°C和260°C之间的操作温度.第007部分:DMA族.单个喷墨可打印和多芯附件.产 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard; German and English version EN 2267-007:2005 |
| DIN EN 2267-010-2006 | 航空航天系列.通用电缆.-55℃～260℃之间的工作温度.第010部分:DR族.单股可UV激光打印.产品标准 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard; German and English version EN 2267-010:2005 |
| DIN EN 2282-1992 | 航空航天系列.飞行器的供电特性 | Aerospace series; characteristics of aircraft electrical supplies; german version EN 2282:1991 |
| DIN EN 2283-1996 | 航空航天系列.飞机上电缆敷设测试 | Aerospace series - Testing of aircraft wiring; German version EN 2283:1996 |
| DIN EN 2284-1991 | 航空航天.铝和锻铝合金的硫酸阳极氧化 | Aerospace series; sulphuric acid anodizing of aluminium and wrougth aluminium alloys; german version EN 2284:1991 |
| DIN EN 2285-1990 | 航空航天系列.带自润滑衬料的铝合金制普通衬套.尺寸和负载 | Aerospace series; bushes plain, aluminium alloy, with self-lubricating liner; dimensions and loads; german version EN 2285:1989 |
| DIN EN 2286-1990 | 航空航天系列.带自润滑衬料的铝合金制有法兰衬套.尺寸和负载 | Aerospace series; bushes flanged, aluminium alloy, with self-lubricating liner; dimensions and loads; German version EN 2286:1989 |
| DIN EN 2287-1990 | 航空航天系列.带自润滑衬料耐蚀钢制普通衬套.尺寸和负载 | Aerospace series; bushes, plain, corrosion resisting steel, with self-lubricating liner; dimensions and loads; german version EN 2287:1989 |
| DIN EN 2288-1990 | 航空航天系列.带自润滑衬料耐蚀钢制有法兰的套筒.尺寸和负载 | Aerospace series; bushes, flanged, corrosion resisting steel, with self-lubricating liner; dimensions and loads; german version EN 2288:1989 |
| DIN EN 2289-1996 | 航空航天系列.飞行控制用铝合金制棒料.交货技术条件 | Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification; German version EN 2289:1996 |
| DIN EN 2290-1-1998 | 航空航天系列.可调节控制杆端部接头的铝合金飞行控制杆体.第1部分:尺寸和负载 | Aerospace series - Rod bodies flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads; German version EN 2290-1:1998 |
| DIN EN 2310-1991 | 航空航天.非金属材料耐燃烧额定值的试验方法 | Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991 |
| DIN EN 2311-1988 | 航空航天.带自润滑衬垫轴瓦.交货技术条件 | Aerospace series; bushes with self-lubricating liner; technical specification |
| DIN EN 2318-1993 | 航空航天.AL-P2024-T3511铝合金.1,2mm≤a或D≤150mm 挤压棒材和型材 | Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1,2 mm a or D 150 mm; German version EN 2318:1992 |
| DIN EN 2326-1992 | 航空航天.AL-P6082-T6铝合金.a 或D≤200mm 的挤压棒材和型材 | Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections a or D 200 mm; german version EN 2326:1992 |
| DIN EN 2327-2007 | 航空航天系列.飞机控制杆用镀镉合金钢径向锯齿锁住垫圈.尺寸 | Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium plated, for flight control rods - Dimensions; German and English version EN 2327:2006 |
| DIN EN 2328-2007 | 航空航天系列.飞机控制杆用镀镉耐腐蚀钢径向锯齿托盘垫圈.尺寸 | Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated, for flight control rods - Dimensions; German and English version EN 2328:2006 |
| DIN EN 2329-1993 | 航空航天.纺织玻璃纤维预浸带.测定单位面积质量的试验方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993 |
| DIN EN 2330-1993 | 航空航天.纺织玻璃纤维预浸带.测定易挥发物质的试验方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the content of volatile matter; german version EN 2330:1993 |
| DIN EN 2331-1993 | 航空航天.纺织玻璃纤维预浸带.测定树脂含量、纤维含量以及单位面积纤维质量的试验方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993 |
| DIN EN 2332-1993 | 航空航天.纺织玻璃纤维预浸带.测定树脂流动的试验方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin flow; german version EN 2332:1993 |
| DIN EN 2334-1997 | 航空航天系列.铝和铝合金铬硫酸酸洗 | Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys; German version EN 2334:1997 |
| DIN EN 2335-2006 | 航空航天.耐蚀钢制不带组装导槽的关节轴承.尺寸和负荷 | Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads; German and English version EN 2335:2005 |
| DIN EN 2336-2006 | 航空航天.耐蚀钢制带组装导槽的关节轴承.尺寸和负荷 | Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads; German and English version EN 2336:2005 |
| DIN EN 2337-2007 | 航空航天系列.球形滑动轴承.技术规范 | Aerospace series - Spherical plain bearings - Technical specification; German and English version EN 2337:2006 |
| DIN EN 2338-2003 | 航空航天系列.钛和钛合金热轧薄板材.厚度6mm～8mm | Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm a 6 mm; Dimensions; German and English version EN 2338:2001 |
| DIN EN 2339-2003 | 航空航天系列.厚度0.2mm a 6mm的冷轧钛和钛合金薄板材.尺寸 | Aerospace series - Sheets, cold rolled, in titanium and titanium alloys, thickness 0,2 mma6 mm - Dimensions; German and English version EN 2339:2001 |
| DIN EN 2344-2003 | 航空航天系列.耐热合金机械加工圆棒材.直径10mm～180mm | Aerospace series - Round bars, machined, in heat resisting alloys - Diameter 10 mm D 180 mm; Dimensions; German and English version EN 2344:2001 |
| DIN EN 2346-002-2007 | 航空航天系列.耐火电缆.工作温度在-65℃～260℃.第002部分:总则 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 002: General; German and English version EN 2346-002:2006 |
| DIN EN 2346-003-2007 | 航空航天系列.耐火电缆.工作温度在-65℃～260℃.第003部分:DL族单芯电缆.产品标准 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 003: DL family, single core - Product standard; German and English version EN 2346-003:2006 |
| DIN EN 2346-004-2007 | 航空航天系列.耐火电缆.工作温度在-65℃～260℃.第004部分: DN族单芯紫外(UV)激光可打印和多芯组合电缆.轻 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard; German and English version EN 2346-004:2006 |
| DIN EN 2348-1989 | 航空航天系列.飞机操纵钢索组件.技术规范 | Aerospace series; control cable assemblies; technical specification |
| DIN EN 2349-201-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第201部分:目视检查 | Aerospace series - Requirements and test procedures for relays and contactors - Part 201: Visual inspection; German and English version EN 2349-201:2006 |
| DIN EN 2349-202-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第202部分:尺寸和质量的检验 | Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass; German and English version EN 2349-202:2006 |
| DIN EN 2349-301-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第301部分:吸收电压和释放电压 | Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage; German and English version EN 2349-301:2006 |
| DIN EN 2349-302-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第302部分:绝缘电阻 | Aerospace series - Requirements and test procedures for relays and contactors - Part 302: Insulation resistance; German and English version EN 2349-302:2006 |
| DIN EN 2349-303-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第303部分:电介质强度 | Aerospace series - Requirements and test procedures for relays and contactors - Part 303: Dielectric strength; German and English version EN 2349-303:2006 |
| DIN EN 2349-304-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第304部分:动作和释放时间 | Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time; German and English version EN 2349-304:2006 |
| DIN EN 2349-305-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第305部分:释放时间 | Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time; German and English version EN 2349-305:2006 |
| DIN EN 2349-306-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第306部分:过载直流电和交流电 | Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006 |
| DIN EN 2349-307-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第307部分:接触电压降 | Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop; German and English version EN 2349-307:2006 |
| DIN EN 2349-308-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第308部分:线圈电流 | Aerospace series - Requirements and test procedures for relays and contactors - Part 308: Coil current; German and English version EN 2349-308:2006 |
| DIN EN 2349-309-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第309部分:输出尖峰信号 | Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes; German and English version EN 2349-309:2006 |
| DIN EN 2349-310-2007 | 航空航天系列.继电器和电流接触器用要求和试验程序.第310部分:中断 | Aerospace series - Requirements and test procedures for relays and contactors - Part 310: Rupture; German and English version EN 2349-310:2006 |
| DIN EN 2349-312-2007 | 航空航天系列.继电器和电流接触器用要求和试验程序.第312部分:电气使用寿命.多种负荷 | Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load; German and English version EN 2349-312:2006 |
| DIN EN 2349-316-2007 | 航空航天系列.继电器和电流接触器用要求和试验程序.第316部分:机械寿命(降低负荷持久性) | Aerospace series - Requirements and test procedures for relays and contactors - Part 316: Mechanical life (Endurance at reduced load); German and English version EN 2349-316:2006 |
| DIN EN 2349-317-2007 | 航空航天系列.继电器和电流接触器用要求和试验程序.第317部分:线圈开关装置的使用寿命 | Aerospace series - Requirements and test procedures for relays and contactors - Part 317: Service life of coil switching device; German and English version EN 2349-317:2006 |
| DIN EN 2349-318-2007 | 航空航天系列.继电器和电流接触器用要求和试验程序.第318部分:高温吸收电压和低温释放电压 | Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature; German and English version EN 2349-318:2006 |
| DIN EN 2349-402-2007 | 航空航天系列.继电器和接触器的要求和试验过程.第402部分:盐喷雾腐蚀 | Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray; German and English version EN 2349-402:2006 |
| DIN EN 2349-405-2007 | 航空航天系列.继电器和接触器的要求和试验过程.第405部分:流体阻力 | Aerospace series - Requirements and test procedures for relays and contactors - Part 405: Fluid resistance; German and English version EN 2349-405:2006 |
| DIN EN 2349-407-2007 | 航空航天系列.继电器和接触器的要求和试验过程.第407部分:冷压/低压和湿热 | Aerospace series - Requirements and test procedures for relays and contactors - Part 407: Cold/low pressure and moist heat; German and English version EN 2349-407:2006 |
| DIN EN 2350-1991 | 航空航天.断路开关.技术规范 | Aerospace series; circuit breakers; technical specification; german version EN 2350:1990 |
| DIN EN 2353-1989 | 航空航天系列.耐蚀钢制操纵钢索的旋转套筒.尺寸和负荷 | Aerospace series; turnbarrels, control cable in corrosion resisting steel; dimensions and loads |
| DIN EN 2354-1989 | 航空和航天系列.不锈钢制带螺纹眼索端的操纵钢索.尺寸和负荷 | Aerospace series; eye-ends, threaded, control cable in corrosion resisting steel; dimensions and loads |
| DIN EN 2355-1989 | 航空航天系列..耐蚀钢制操纵钢索的带螺纹的叉端头.尺寸和负荷 | Aerospace series; fork-ends, threaded, control cable in corrosion resisting steel; dimensions and loads |
| DIN EN 2356-1989 | 航空航天..耐蚀钢制滚动轴承的操纵钢索的带螺纹叉端头.尺寸和负荷 | Aerospace series; fork-ends threaded, control cable for rolling bearing in corrosion resisting steel; dimensions and loads |
| DIN EN 2357-1989 | 航空航天.耐蚀钢制操纵钢索的旋压连接形式的端头.尺寸和负荷 | Aerospace series; stud-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads |
| DIN EN 2358-1989 | 航空和航天系列.操纵钢索的不锈钢制模锻带眼的索端 | Aerospace series; eye-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads |
| DIN EN 2359-1989 | 航空航天.操纵钢索的耐蚀钢制挤压连接式叉形端头 | Aerospace series; fork-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads |
| DIN EN 2360-1989 | 航空航天系列.操纵钢索的不锈钢滚制滚动轴承的挤压连接型叉型端部.尺寸和载荷 | Aerospace series; fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable; dimensions and loads |
| DIN EN 2361-1989 | 航空航天.耐蚀钢制操纵钢索的旋压连接形的双拉杆球形端头 | Aerospace series; ball-ends, double shank in corrosion resisting steel swaged on type, control cable; dimensions and loads |
| DIN EN 2362-1989 | 航空航天系列.操纵钢索的不锈钢挤压连接型球形端部.尺寸和载荷 | Aerospace series; ball-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads |
| DIN EN 2363-1989 | 航空航天.操纵钢索松紧螺丝扣的固定夹子.尺寸 | Aerospace series; locking clips for turnbuckles of control cables; dimensions |
| DIN EN 2364-1989 | 航空航天.带头部的紧公差抗剪切销钉 | Aerospace; pins, shear, headed, close tolerance; german version EN 2364:1989 |
| DIN EN 2365-1989 | 航空航天.铝合金铆钉套环 | Aerospace; collars, aluminium alloy; german version EN 2365:1989 |
| DIN EN 2367-1989 | 航空航天.EN 2573 钢制开口销 | Aerospace; split pins in steel EN 2573; german version EN 2367:1989 |
| DIN EN 2374-1991 | 航空航天.玻璃纤维增强的模压件和夹芯复合材料.试验板的生产 | Aerospace series; glass fibre-reinforced mouldings and sandwich composites; production of test panels; german version EN 2374:1991 |
| DIN EN 2375-1992 | 航空航天.树脂浸渍材料.产品的批取样程序 | Aerospace series; resin preimpregnated materials; production batch sampling procedure; german version EN 2375:1992 |
| DIN EN 2377-1989 | 航空航天系列.玻璃纤维增强的塑料.外表层间抗剪强度的测定 | Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989 |
| DIN EN 2378-1995 | 航空航天系列.纤维增强塑料.通过浸入测定吸水量; 德文版本 EN 2378:1995 | Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion; German version EN 2378:1995 |
| DIN EN 2381-1993 | 航空航天.AL-P7009-T7452铝合金.40mm≤a≤150mm自由锻件 | Aerospace series; aluminium alloy AL-P7009-T7452; hand forgings 40 mm a 150 mm; German version EN 2381:1992 |
| DIN EN 2384-1992 | 航空航天.AL-P2014A-T6511铝合金.a或D≤150mm 的挤压棒材和型材 | Aerospace series; aluminium alloy AL-P2014A-T6511; extruded bars and sections a or D 150 mm; german version EN 2384:1992 |
| DIN EN 2385-1993 | 航空航天.AL-P7009-T74511铝合金.a或D≤12.5mm挤压棒材和型材 | Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections a or D 125 mm; German version EN 2385:1992 |
| DIN EN 2395-2006 | 航空航天.AL-P2014A-T4或T42铝合金.薄板材和带材.0.4mm<=a<=6mm | Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2395:2005 |
| DIN EN 2413-1995 | 航空航天系列.镀镉合金钢短螺纹紧公差薄头六角肩形螺栓.等级:1100MPa(室温)/235℃; 德文版本 EN 2413:1995 | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2413:1995 |
| DIN EN 2422-2006 | 航空航天系列.铝合金AL-P2124-T351.板材.25mm | Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm ＜ a ≤ 120 mm; German and English version EN 2422:2005 |
| DIN EN 2424-1995 | 航空航天系列.航空航天产品标记; 德文版本 EN 2424:1995 | Aerospace series - Marking of aerospace products; German version EN 2424:1995 |
| DIN EN 2428-1995 | 航空航天系列.乙丙橡胶(EPM/EPDM).硬度为:50 国际橡胶硬度标度; 德文版本 EN 2428:1995 | Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 50 IRHD; German version EN 2428:1995 |
| DIN EN 2429-1995 | 航空航天系列.乙丙橡胶(EPM/EPDM).硬度为 60 国际橡胶硬度标度硬度硬度硬度; 德文版本 EN 2429:1995 | Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD; German version EN 2429:1995 |
| DIN EN 2430-1995 | 航空航天系列.乙丙橡胶(EPM/EPDM).硬度为 70 国际橡胶硬度标度硬度硬度; 德文版本 EN 2430:1995 | Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD; German version EN 2430:1995 |
| DIN EN 2431-1995 | 航空航天系列.乙丙橡胶(EPM/EPDM).硬度为 80 国际橡胶硬度标度硬度硬度; 德文版本 EN 2431:1995 | Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD; German version EN 2431:1995 |
| DIN EN 2432-1995 | 航空航天系列.乙丙橡胶(EPM/EPDM).硬度为 90 国际橡胶硬度标度硬度; 德文版本 EN 2432:1995 | Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD; German version EN 2432:1995 |
| DIN EN 2434-005-2007 | 航空航天系列.涂料和清漆.双组分冷固化聚氨酯光洁度.第005部分:军用高柔性和耐化学试剂性 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application; German and English version EN 2434-005:2006 |
| DIN EN 2435-001-2007 | 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第001部分:最低要求 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 001: Minimum requirements; German and English version EN 2435-001:2006 |
| DIN EN 2435-002-2007 | 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第002部分:强耐腐蚀性 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance; German and English version EN 2435-002:2006 |
| DIN EN 2435-003-2007 | 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第003部分:耐强腐蚀和耐液体侵蚀性 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance; German and English version EN 2435-003:2006 |
| DIN EN 2435-004-2007 | 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第004部分:有表面制备公差的耐强腐蚀性和液体侵 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance; German and English version EN 2435-004:2006 |
| DIN EN 2435-005-2007 | 航空航天系列.涂料和清漆.含铬酸盐的双组分冷加工底漆的耐腐蚀性.第005部分:军用强耐腐蚀性 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application; German and English version EN 2435-005:2006 |
| DIN EN 2436-001-2007 | 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第001部分:基本要求 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 001: Basic requirements; German and English version EN 2436-001:2006 |
| DIN EN 2436-002-2007 | 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第002部分:强耐腐蚀性 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 002: High corrosion resistance; German and English version EN 2436-002:2006 |
| DIN EN 2436-003-2007 | 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第003部分:强耐腐蚀性和耐液体侵蚀性 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance; German and English version EN 2436-003:2006 |
| DIN EN 2436-004-2007 | 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第004部分:有表面预加工公差的强耐腐蚀性和耐液 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance; German and English version EN 2436-004:2006 |
| DIN EN 2436-005-2007 | 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第005部分:外部用表面预加工公差 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 005: For exterior use with surface preparation tolerance; German and English version EN 2436-005:2006 |
| DIN EN 2436-006-2007 | 航空航天系列.涂料和清漆.不含铬酸盐的双组分冷加工环氧底漆的耐腐蚀性.第006部分:军用强耐腐蚀性 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application; German and English version EN 2436-006:2006 |
| DIN EN 2437-2003 | 航空航天系列.铝及铝合金铬酸盐转化涂层(黄色) | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys; German and English version EN 2437:2001 |
| DIN EN 2469-2007 | 航空航天系列.FE-PA3901(X1CrNi18-10)型钢.空气熔炼.软化.钢丝.0.4mm≤D≤12.5mm.450MPa≤R<(指数)m>≤650M | Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0,4 mm D 12,5 mm - 450 MPa R<(Index)m> 650 MPa; German and English version EN 2469:2007 |
| DIN EN 2484-1989 | 航空航天.图纸的缩微.35mm缩微胶片的方孔卡 | Aerospace series; microfilming of drawings; aperture card for 35 mm microfilm; german version EN 2484:1988 |
| DIN EN 2486-2006 | 航天航空系列.AL-P2618A 型铝合金.锻坯件.德文和英文版本EN 2486-2005 | Aerospace series - Aluminium alloy AL-P2618A - Forging stock; German and English version EN 2486:2005 |
| DIN EN 2489-1995 | 航空航天系列.纤维增强塑料.试验流体影响的测定; 德文版本 EN 2489:1995 | Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids; German version EN 2489:1995 |
| DIN EN 2491-1997 | 航空航天系列.二硫化钼基干膜润滑材料.涂覆方法 | Aerospace series - Molybdenum disulphide dry lubricants - Coating methods; German version EN 2491:1997 |
| DIN EN 2495-1991 | 航空航天.温度补偿的额定电流25A以下单极断路开关..产品标准 | Aerospace series; single-pole circuit breakers, temperature compensated rated currents up to 25 A; product standard; german version EN 2495:1990 |
| DIN EN 2497-1989 | 航空航天.钛和钛合金的干喷砂处理 | Aerospace series; dry abrasive blasting of titanium and titanium alloys; german version EN 2497:1989 |
| DIN EN 2498-1991 | 航空航天系列.纹螺杆的自润滑衬层的自校准关节轴承的可调操纵杆端头.尺寸和负荷 | Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads |
| DIN EN 2499-1989 | 航空航天系列.计算机输出缩微胶片.A6 缩微胶片 | Aerospace series; computer output microfilm (COM); A6 microfiche; german version EN 2499:1987 |
| DIN EN 2501-1989 | 航空航天.宽内环的带自润滑内衬的耐蚀钢制关节轴承.尺寸和负荷 | Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liners and wide inner ring; dimensions and loads |
| DIN EN 2511-2006 | 航空航天系列.铝合金AL-P7075-T7351.板材.6mm | Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm a 100 mm; German and English version EN 2511:2005 |
| DIN EN 2515-1991 | 航空航天.带可调节单叉和螺纹杆的连接杆端.尺寸及负载 | Aerospace series; rod ends, adjustable single fork and threaded shank; dimensions and loads |
| DIN EN 2516-1997 | 航空航天系列.耐蚀钢钝化和镍合金净化 | Aerospace series - Passivation of corrosion resistant steels and decontamination of nickel base alloys; German version EN 2516:1997 |
| DIN EN 2536-1995 | 航空航天系列.铝合金的淬硬阳极氧化处理; 德文版本 EN 2536:1995 | Aerospace series - Hard anodizing of aluminium alloys; German version EN 2536:1995 |
| DIN EN 2544-1989 | 航空航天.航空航天设备的图纸上铆钉的表示法 | Aerospace series; representation of rivets on drawings for aerospace equipment; german version EN 2544:1987 |
| DIN EN 2545-1-1995 | 航空航天系列.钛和钛合金重熔毛坯和铸件.技术规范.第1部分:一般要求; 德文版本 EN 2545-1:1995 | Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 1: General requirements; German version EN 2545-1:1995 |
| DIN EN 2545-2-1995 | 航空航天系列.钛和钛合金的重熔料和铸件.技术规范.第2部分:重熔料 | Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 2: Remelting stock; German version EN 2545-2:1995 |
| DIN EN 2545-3-1995 | 航空航天系列.钛和钛合金重熔毛坯和铸件.技术规范.第3部分:预制铸件和生产铸件; 德文版本 EN 2545-3:1995 | Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 3: Pre-productions and production castings; German version EN 2545-3:1995 |
| DIN EN 2546-2006 | 航空航天系列.飞机控制杆用钝化耐蚀钢制带径向齿的锁紧垫圈.尺寸 | Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions; German and English version EN 2546:2006 |
| DIN EN 2547-1989 | 航空航天.文献缩微.105mm缩微胶片(A6缩微平片) | Aerospace series; filming of documents; microfilm 105 mm (microfiche A6); german version EN 2547:1987 |
| DIN EN 2549-2007 | 航空航天系列.加 MoS<下标2> 润滑剂的阳极氧化钛合金短螺纹公称六角紧公差螺栓.等级:1100MPa(室温)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 2549:2006 |
| DIN EN 2550-1993 | 航空航天系列.英寸系列1050A铝100°普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series; german version EN 2550:1992 |
| DIN EN 2551-1993 | 航空航天系列.英寸系列2117A铝合金拱顶100°普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series; german version EN 2551:1992 |
| DIN EN 2552-1993 | 航空航天.英寸系列2117A铝合金拱顶100°普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series; german version EN 2552:1992 |
| DIN EN 2553-1993 | 航空航天.英寸系列2017A铝合金拱顶100°普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series; german version EN 2553:1992 |
| DIN EN 2555-1993 | 航空航天.英寸系列5056A铝合金拱顶100°普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series; german version EN 2555:1992 |
| DIN EN 2556-1993 | 航空航天.英制系列的5056A铅合金制阳极化或镀铬的带拱顶100度普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series; German version EN 2556:1992 |
| DIN EN 2557-1997 | 航空航天系列.碳纤维预浸带.单位面积重量测定 | Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area; German version EN 2557:1997 |
| DIN EN 2558-1997 | 航空航天系列.碳纤维预浸渍物.易挥发成份测定 | Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content; German version EN 2558:1997 |
| DIN EN 2559-1997 | 航空航天系列.碳纤维预浸带.树脂成份、纤维成份以及单位面积纤维重量测定 | Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German version EN 2559:1997 |
| DIN EN 2560-1998 | 航空航天系列.碳纤维预浸渍.树脂流的测定 | Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow; German version EN 2560:1998 |
| DIN EN 2561-1995 | 航空航天系列.碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验; 德文版本 EN 2561:1995 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction; German version EN 2561:1995 |
| DIN EN 2562-1997 | 航空航天系列.碳纤维增强塑料.单向层压塑料.与纤维方向平行的弯曲试验 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997 |
| DIN EN 2563-1997 | 航空航天系列.碳纤维增强塑料.单向层压制品.表观层压间抗切强度测定 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength; German version EN 2563:1997 |
| DIN EN 2564-1998 | 航空航天系列.碳纤维层压塑料.纤维含量、树脂含量和气孔的测定 | Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents; German version EN 2564:1998 |
| DIN EN 2569-1992 | 航空航天系列.操纵钢缆接头和松紧螺丝扣.技术规范 | Aerospace series; control cable fittings and turnbarrels; technical specification; german version EN 2569:1991 |
| DIN EN 2570-1996 | 航空航天系列.镍镉电池.技术规范 | Aerospace series - Nickel-cadmium batteries - Technical specification; German version EN 2570:1996 |
| DIN EN 2573-2007 | 航空航天系列.FE-PA3601(X6CrNiTi18-10)型钢.软化的.R<(指数)m>≤780MPa.线材.0.25mm≤D<(指数)e>≤3mm | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Softened - R<(Index)m> 780 MPa - Wire - 0,25 mm D<(Index)e> 3 mm; German and English version EN 2573:2007 |
| DIN EN 2574-1991 | 航空航天.焊缝.图纸上的说明 | Aerospace series; welds; information on drawings |
| DIN EN 2575-1989 | 航空航天系列.文献的缩微.16mm 缩微胶片 | Aerospace series; filming of documents; 16 mm microfilm; german version EN 2575:1988 |
| DIN EN 2583-1997 | 航空航天系列.耐高温镍基合金(因科镍合金718)MJ螺纹螺钉.等级:1275MPa(室温)/650℃.交货技术条件 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 °C; technical specification; German version EN 2583:1997 |
| DIN EN 2584-2002 | 航空航天系列.带自动润滑内衬的耐腐蚀钢制球面滑动轴承.窄系列:室温下提高的负荷:尺寸和负载; 德文版本 EN | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series; Elevated loads at ambient temperature; Dimensions and loads; German version EN 2584:2001 |
| DIN EN 2585-2006 | 航空航天系列.室温条件下高负荷、宽系列、带自润滑衬套的耐蚀钢关节轴承.尺寸和负载 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2001 |
| DIN EN 2586-1991 | 航空航天系列.飞行控制杆的锁紧垫圈.尺寸 | Aerospace series; washers, lock, for flight control rods; dimensions; german version EN 2586:1991 |
| DIN EN 2587-1991 | 航空航天.带可调节双叉和螺纹杆的连接杆端.尺寸及负载 | Aerospace series; rod ends, adjustable double fork and threaded shank; dimensions and loads |
| DIN EN 2588-2006 | 航空航天系列.带组装导槽的耐蚀钢制球面滑动轴承.尺寸和承载 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads; German and English version EN 2588:2006 |
| DIN EN 2591-100-2006 | 航空航天系列.电和光学连接元件.试验方法.第100部分:总则 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General; German and English version EN 2591-100:2005 |
| DIN EN 2591-101-1994 | 航空航天.光电连接元件.试验方法.第101部分:目视检查 | Aerospace series - Elements of electrical and optical connection; test methods - Part 101: Visual examination; German version EN 2591-101:1994 |
| DIN EN 2591-102-1998 | 航空航天.光电连接件.试验方法.第102部分:尺寸和重量检验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 102: Examination of dimensions and mass; German version EN 2591-102:1996 |
| DIN EN 2591-1992 | 航空航天.电器和光学仪器连接件.试验方法.总则 | Aerospace series; elements of electrical and optical connection; test methods; general; german version EN 2591:1992 |
| DIN EN 2591-201-1998 | 航空航天.光电连接件.试验方法.第201部分:低电平接触电阻 | Aerospace series - Elements of electrical and optical connection; test methods - Part 201: Contact resistance, low level; German version EN 2591-201:1996 |
| DIN EN 2591-202-1998 | 航空航天.光电连接件.试验方法.第202部分:额定电流接触电阻 | Aerospace series - Elements of electrical and optical connection; test methods - Part 202: Contact resistance at rated current; German version EN 2591-202:1996 |
| DIN EN 2591-203-1998 | 航空航天.光电连接件.试验方法.第203部分:微伏级连续电流通量 | Aerospace series - Elements of electrical and optical connection; test methods - Part 203: Electrical continuity at microvolt level; German version EN 2591-203:1996 |
| DIN EN 2591-204-1998 | 航空航天.光电连接件.试验方法.第204部分:微秒级接触中断 | Aerospace series - Elements of electrical and optical connection; test methods - Part 204: Discontinuity of contacts in the microsecond range; German version EN 2591-204:1996 |
| DIN EN 2591-205-1998 | 航空航天.光电连接件.试验方法.第205部分:外壳连续电流通量 | Aerospace series - Elements of electrical and optical connection; test methods - Part 205: Housing (shell) electrical continuity; German version EN 2591-205:1996 |
| DIN EN 2591-206-1998 | 航空航天.光电连接件.试验方法.第206部分:绝缘电阻测量 | Aerospace series - Elements of electrical and optical connection; test methods - Part 206: Measurement of insulation resistance; German version EN 2591-206:1996 |
| DIN EN 2591-207-1998 | 航空航天.光电连接件.试验方法.第207部分:耐电压强度 | Aerospace series - Elements of electrical and optical connection; test methods - Part 207: Voltage proof test; German version EN 2591-207:1996 |
| DIN EN 2591-208-1998 | 航空航天.光电连接件.试验方法.试验方法.第208部分:额定电流升温 | Aerospace series - Elements of electrical and optical connection; test methods - Part 208: Temperature rise due to rated current; German version EN 2591-208:1996 |
| DIN EN 2591-209-1998 | 航空航天.光电连接件.试验方法.第209部分:电流温度负载降低值测定 | Aerospace series - Elements of electrical and optical connection; test methods - Part 209: Current temperature derating; German version EN 2591-209:1996 |
| DIN EN 2591-210-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第210部分:电气超载试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 210: Electrical overload; German version EN 2591-210:1998 |
| DIN EN 2591-211-2003 | 航空航天系列.光电连接元件.试验方法.第211部分:电容 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 211: Capacitance; German and English version EN 2591-211:2002 |
| DIN EN 2591-212-2006 | 航空航天系列.电和光学连接元件.试验方法.第212部分:表面传输阻抗 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance; German and English version EN 2591-212:2005 |
| DIN EN 2591-213-1997 | 航空航天系列.光电连接件.试验方法.第213部分:100 MHz至1 GHz屏蔽效用 | Aerospace series - Elements of electrical and optical connection; test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz; German version EN 2591-213:1997 |
| DIN EN 2591-214-2006 | 航空航天系列.电气和光学连接元器件.试验方法.第214部分:雷击、电流和电压脉冲 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse; German and English version EN 2591-214:2005 |
| DIN EN 2591-216-1997 | 航空航天系列.光电连接件.试验方法.第216部分:触点介入深度 | Aerospace series - Elements of electrical and optical connection; test methods - Part 216: Engagement depth of contacts; German version EN 2591-216:1997 |
| DIN EN 2591-217-2003 | 航空航天系列.光电连接元件.试验方法.第217部分:终端接线片和连机连接规定电流下的电压降 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices; German and English version EN 2591-217:2002 |
| DIN EN 2591-218-2003 | 航空航天系列.光电连接元件.试验方法.第218部分:温度电流循环测试终端接线片和连机连接的老化 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling; German and English version EN 2591-218:2002 |
| DIN EN 2591-219-2003 | 航空航天系列.光电连接元件.试验方法.第219部分:绝缘终端接线片和连机连接电压强度 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices; German and English version EN 2591-219:2002 |
| DIN EN 2591-220-2006 | 航空航天系列.电光连接件.试验方法.第220部分:利用电流温度循环固化触点和导体接合点 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling; German and English version EN 2591-220:2005 |
| DIN EN 2591-301-1998 | 航空航天.光电连接件.试验方法.第301部分:耐温性 | Aerospace series - Elements of electrical and optical connection; test methods - Part 301: Endurance at temperature; German version EN 2591-301:1996 |
| DIN EN 2591-302-1997 | 航空航天系列.光电连接件.试验方法.第302部分:气候顺序 | Aerospace series - Elements of electrical and optical connection; test methods - Part 302: Climatic sequence; German version EN 2591-302:1997 |
| DIN EN 2591-303-1997 | 航空航天系列.光电连接件.试验方法.第303部分:冷却/低压和湿热 | Aerospace series - Elements of electrical and optical connection; test methods - Part 303: Cold/low pressure and damp heat; German version EN 2591-303:1997 |
| DIN EN 2591-304-1997 | 航空航天系列.光电连接件.试验方法.第304部分:湿热耐久试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 304: Damp heat steady state; German version EN 2591-304:1997 |
| DIN EN 2591-305-1997 | 航空航天系列.光电连接件.试验方法.第305部分:温度骤变 | Aerospace series - Elements of electrical and optical connection; test methods - Part 305: Rapid change of temperature; German version EN 2591-305:1997 |
| DIN EN 2591-306-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第306部分:霉菌生长试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 306: Mould growth; German version EN 2591-306:1998 |
| DIN EN 2591-307-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第307部分:盐雾试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 307: Salt mist; German version EN 2591-307:1998 |
| DIN EN 2591-308-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第308部分:沙尘试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 308: Sand and dust; German version EN 2591-308:1998 |
| DIN EN 2591-309-1997 | 航空航天系列.光电连接件.试验方法.第309部分:干热 | Aerospace series - Elements of electrical and optical connection; test methods - Part 309: Dry heat; German version EN 2591-309:1997 |
| DIN EN 2591-310-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第310部分:冷冻试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 310: Cold; German version EN 2591-310:1998 |
| DIN EN 2591-311-1997 | 航空航天系列.光电连接件.试验方法.第311部分:低气压 | Aerospace series - Elements of electrical and optical connection; test methods - Part 311: Low air pressure; German version EN 2591-311:1997 |
| DIN EN 2591-312-1997 | 航空航天系列.光电连接件.试验方法.第312部分:气密性 | Aerospace series - Elements of electrical and optical connection; test methods - Part 312: Air leakage; German version EN 2591-312:1997 |
| DIN EN 2591-313-1997 | 航空航天系列.光电连接件.试验方法.第313部分:人工淋雨 | Aerospace series - Elements of electrical and optical connection; test methods - Part 313: Artificial rain; German version EN 2591-313:1997 |
| DIN EN 2591-314-1997 | 航空航天系列.光电连接件.试验方法.第314部分:低压浸渍 | Aerospace series - Elements of electrical and optical connection; test methods - Part 314: Immersion at low air pressure; German version EN 2591-314:1997 |
| DIN EN 2591-315-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第315部分:流体阻力试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 315: Fluid resistance; German version EN 2591-315:1998 |
| DIN EN 2591-316-1997 | 航空航天系列.光电连接件.试验方法.第316部分:耐臭氧 | Aerospace series - Elements of electrical and optical connection; test methods - Part 316: Ozone resistance; German version EN 2591-316:1997 |
| DIN EN 2591-317-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第317部分:易燃性试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 317: Flammability; German version EN 2591-317:1998 |
| DIN EN 2591-318-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第318部分:耐火性试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 318: Fire-resistance; German version EN 2591-318:1998 |
| DIN EN 2591-319-1997 | 航空航天系列.光电连接件.试验方法.第319部分:气密和无焊缠绕连接 | Aerospace series - Elements of electrical and optical connection; test methods - Part 319: Gastightness of solderless wrapped connections; German version EN 2591-319:1997 |
| DIN EN 2591-320-1997 | 航空航天系列.光电连接件.试验方法.第320部分:地面模拟阳光辐射 | Aerospace series - Elements of electrical and optical connection; test methods - Part 320: Simulated solar radiation at ground level; German version EN 2591-320:1997 |
| DIN EN 2591-321-1997 | 航空航天系列.光电连接件.试验方法.第321部分:湿热同期检验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 321: Damp heat, cyclic test; German version EN 2591-321:1997 |
| DIN EN 2591-322-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第322部分:密封性试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998 |
| DIN EN 2591-323-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第323部分:热冲击试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 323: Thermal shock; German version EN 2591-323:1998 |
| DIN EN 2591-324-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第324部分:界面密封试验 | Aerospace series - Elements of electrical and optical connection; test methods - Part 324: Interfacial sealing; German version EN 2591-315:1998 |
| DIN EN 2591-325-2003 | 航空航天系列.光电连接元件.试验方法.第325部分:耐结冰 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 325: Ice resistance; German and English version EN 2591-325:2002 |
| DIN EN 2591-401-1998 | 航空航天.光电连接件.试验方法.第401部分:恒定加速 | Aerospace series - Elements of electrical and optical connection; test methods - Part 401: Acceleration, steady state; German version EN 2591-401:1996 |
| DIN EN 2591-402-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第402部分:冲击 | Aerospace series - Elements of electrical and optical connection; test methods - Part 402: Shock; German version EN 2591-402:1998 |
| DIN EN 2591-403-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第403部分:正弦振动和随机振动 | Aerospace series - Elements of electrical and optical connection; test methods - Part 403: Sinusoidal and random vibration; German version EN 2591-403:1998 |
| DIN EN 2591-404-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第404部分:横向载荷 | Aerospace series - Elements of electrical and optical connection; test methods - Part 404: Transverse load; German version EN 2591-404:1998 |
| DIN EN 2591-405-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第405部分:轴向载荷 | Aerospace series - Elements of electrical and optical connection; test methods - Part 405: Axial load; German version EN 2591-405:1998 |
| DIN EN 2591-406-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第406部分:机械寿命 | Aerospace series - Elements of electrical and optical connection; test methods - Part 406: Mechanical endurance; German version EN 2591-406:1998 |
| DIN EN 2591-407-1999 | 航空航天系列.电器和光学仪器连接元件.试验方法.第407部分:触点固定系统和密封的耐久性 | Aerospace series - Elements of electrical and optical connection; test methods - Part 407: Durability of contact retention system and seals; German version EN 2591-407:1999 |
| DIN EN 2591-408-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第408部分:接合力和断开力 | Aerospace series - Elements of electrical and optical connection; test methods - Part 408: Mating and unmating forces; German version EN 2591-408:1998 |
| DIN EN 2591-409-1999 | 航空航天系列.电器和光学仪器连接元件.试验方法.第409部分:插接件中触点的固定 | Aerospace series -Elements of electrical and optical connection; test methods - Part 409: Contact retention in insert; German version EN 2591-409:1999 |
| DIN EN 2591-410-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第410部分:壳体中插入件的固定（轴向的） | Aerospace series - Elements of electrical and optical connection; test methods - Part 410: Insert retention in housing (axial); German version EN 2591-410:1998 |
| DIN EN 2591-411-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第411部分:壳体中插入件的固定（扭转的） | Aerospace series - Elements of electrical and optical connection; test methods - Part 411: Insert retention in housing (torsional); German version EN 2591-411:1998 |
| DIN EN 2591-412-1999 | 航空航天系列.电器和光学仪器连接元件.试验方法.第412部分:触点的插接力和拉力 | Aerospace series -Elements of electrical and optical connection; test methods - Part 412: Contact insertion and extraction forces; German version EN 2591-412:1999 |
| DIN EN 2591-413-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第413部分:弹簧接地系统的保持力 | Aerospace series - Elements of electrical and optical connection; test methods - Part 413: Holding force of grounding spring system; German version EN 2591-413:1998 |
| DIN EN 2591-414-1998 | 航空航天系列.电气和光学仪器连接元件.试验方法.第414部分:短索分离连接器的断开 | Aerospace series - Elements of electrical and optical connection; test methods - Part 414: Unmating of lanyard release connectors; German version EN 2591-414:1998 |
| DIN EN 2591-415-2002 | 航空航天系列.电气和光学连接元件.试验方法.第415部分: 测试探头故障(内触点); 德文和英文版本 EN 2591-415 | Aerospace series - Elements of electrical and optical connections; Test methods - Part 415: Test probe damage (female contacts); German and English version EN 2591-415:2001 |
| DIN EN 2591-416-2002 | 航空航天系列.电气和光学连接元件.试验方法.第416部分:触点抗弯强度; 德文和英文版本 EN 2591-416:2001 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength; German and English version EN 2591-416:2001 |
| DIN EN 2591-417-2002 | 航空航天系列.电气和光学连接元件.试验方法.第417部分:抗拉强度(压合连接); 德文和英文版本 EN 2591-417:20 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 417: Tensile strength (crimped connection); German and English version EN 2591-417:2001 |
| DIN EN 2591-418-2002 | 航空航天系列.电气和光学连接元件.试验方法.第418部分:量规插入和拔出力(内触点); 德文和英文版本 EN 2591- | Aerospace series - Elements of electrical and optical connection; Test methods - Part 418: Gauge insertion/extraction forces (female contacts); German and English version EN 2591-418:2001 |
| DIN EN 2591-419-2002 | 航空航天系列.电气和光学连接元件.试验方法.第419部分:插入物外触点的稳定性; 德文和英文版本 EN 2591-419: | Aerospace series - Elements of electrical and optical connection; Test methods - Part 419: Stability of male contacts in insert; German and English version EN 2591-419:2001 |
| DIN EN 2591-420-2007 | 航空航天系列.电气和光学连接元件.试验方法.第420部分:后部附件的机械强度 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories; German and English version EN 2591-420:2006 |
| DIN EN 2591-421-2003 | 航空航天系列.光电连接元件.试验方法.第421部分:自由跌落 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 421: Free fall; German and English version EN 2591-421:2002 |
| DIN EN 2591-422-2003 | 航空航天系列.光电连接元件.试验方法.第422部分:锁线孔强度 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 422: Locking wire hole strength; German and English version EN 2591-422:2002 |
| DIN EN 2591-423-2006 | 航空航天系列.电和光学连接元件.试验方法.第423部分:连接器背部组件的螺纹强度 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 423: Connector rear accessories thread strength; German and English version EN 2591-423:2005 |
| DIN EN 2591-424-2002 | 航空航天系列.电气和光学连接元件.试验方法.第424部分:无钎焊缠绕连接件的剥离力; 德文和英文版本 EN 2591- | Aerospace series - Elements of electrical and optical connection; Test methods - Part 424: Stripping force, solderless wrapped connections; German and English version EN 2591-424:2001 |
| DIN EN 2591-425-2002 | 航空航天系列.电气和光学连接元件.试验方法.第425部分:无钎焊缠绕连接件的非缠绕性; 德文和英文版本 EN 259 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 425: Unwrapping capability, solderless wrapped connections; German and English version EN 2591-425:2001 |
| DIN EN 2591-426-2002 | 航空航天系列.电气和光学连接元件.试验方法.第426部分:触点保持系统的有效性; 德文和英文版本 EN 2591-426: | Aerospace series - Elements of electrical and optical connection; Test methods - Part 426: Contact retention system effectiveness; German and English version EN 2591-426:2001 |
| DIN EN 2591-427-2002 | 航空航天系列.电气和光学连接元件.试验方法.第427部分:防护罩附件的坚固性; 德文和英文版本 EN 2591-427:20 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 427: Robustness of protective cover attachment; German and English version EN 2591-427:2001 |
| DIN EN 2591-428-2003 | 航空航天系列.光电连接元件.试验方法.第428部分:终端接线波纹片通电正弦振动 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs; German and English version EN 2591-428:2002 |
| DIN EN 2591-501-2003 | 航空航天系列.光电连接元件.试验方法.第501部分:软钎焊性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 501: Soft solderability; German and English version EN 2591-501:2002 |
| DIN EN 2591-502-2002 | 航空航天系列.光电连接件.试验方法.第502部分:束口 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 502: Restricted entry; German and English version EN 2591-502:2001 |
| DIN EN 2591-503-2002 | 航空航天系列.光电连接件.试验方法.第503部分:触点压合变形 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 503: Contact deformation after crimping; German and English version EN 2591-503:2001 |
| DIN EN 2591-505-2002 | 航空航天系列.光电连接件.试验方法.第505部分:触点防护有效性(防碰擦) | Aeospace series - Elements of electrical and optical connection; Test methods - Part 505: Contact protection effectiveness (scoop-proof); German and English version EN 2591-505:2001 |
| DIN EN 2591-506-2002 | 航空航天系列.光电连接件.试验方法.第506部分:工具的使用 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 506: Use of tools; German and English version EN 2591-506:2001 |
| DIN EN 2591-507-2003 | 航空航天系列.光电连接元件.试验方法.第507部分:电镀孔隙率 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 507: Plating porosity; German and English version EN 2591-507:2002 |
| DIN EN 2591-508-2003 | 航空航天系列.光电连接元件.试验方法.第508部分:触点涂层厚度测量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 508: Measurement of thickness of coating on contacts; German and English version EN 2591-508:2001 |
| DIN EN 2591-509-2003 | 航空航天系列.光电连接元件.试验方法.第509部分:触点涂层附着力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 509: Adhesion of coating on contacts; German and English version EN 2591-509:2001 |
| DIN EN 2591-512-2003 | 航空航天系列.光电连接元件.试验方法.第512部分:密封连接器外壳固定接头有效性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell; German and English version EN 2591-512:2002 |
| DIN EN 2591-513-2003 | 航空航天系列.光电连接元件.试验方法.第513部分:导磁性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 513: Magnetic permeability; German and English version EN 2591-513:2002 |
| DIN EN 2591-514-2003 | 航空航天系列.光电连接元件.试验方法.第514部分:自含焊锡和助熔剂的触点可焊性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 514: Solderability of contacts with self-contained solder and flux; German and English version EN 2591-514:2002 |
| DIN EN 2591-515-2006 | 航空航天系列.电气和光学连接元件.试验方法.第515部分:水解稳定性 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 515: Hydrolytic stability; German and English version EN 2591-515:2005 |
| DIN EN 2591-601-2002 | 航空航天系列.光电连接件.试验方法.第601部分:光学元件.嵌入损耗 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 601: Optical elements; Insertion loss; German and English version EN 2591-601:2001 |
| DIN EN 2591-602-2002 | 航空航天系列.光电连接件.试验方法.第602部分:光学元件.衰减变量和光学不连续性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 602: 0ptical elements; Variation of attenuation and optical discontinuity; German and English version EN 2591-602:2001 |
| DIN EN 2591-603-2002 | 航空航天系列.光电连接件.试验方法.第603部分:光学元件.配电改变 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 603: Optical elements; Change of power distribution; German version EN 2591-603:2002 |
| DIN EN 2591-604-2002 | 航空航天系列.光电连接件.试验方法.第604部分:光学元件.光学平面净化能力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 604: Optical elements; Cleaning capability of optical face; German and English version EN 2591-604:2001 |
| DIN EN 2591-605-2002 | 航空航天系列.电气和光学连接元件.试验方法.第605部分:光学元件.回路损耗; 德文版本 EN 2591-605:2002 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 605: Optical elements; Return loss; German version EN 2591-605:2002 |
| DIN EN 2591-606-2002 | 航空航天系列.电气和光学连接元件.试验方法.第605部分:光学元件.串音; 德文版本 EN 2591-606:2002 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 606: Optical elements; Crosstalk; German version EN 2591-606:2002 |
| DIN EN 2591-607-2002 | 航空航天系列.电气和光学连接元件.试验方法.第607部分:光学元件.对周围光耦合的抗扰性; 德文版本 2591-607: | Aerospace series - Elements of electrical and optical connection; Test methods - Part 607: Optical elements; Immunity to ambient light coupling; German version EN 2591-607:2002 |
| DIN EN 2591-609-2006 | 航空航天.光电连接件.试验方法.第609部分:光学元件.电缆配置效力.柔性循环电缆 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing; German and English version EN 2591-609:2005 |
| DIN EN 2591-610-2002 | 航空航天系列.光电连接件.试验方法.第610部分:光学元件.电缆附件有效性.电缆牵拉 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 610: Optical elements; Effectiveness of cable attachment; Cable pulling; German and English version EN 2591-610:2001 |
| DIN EN 2591-6101-2003 | 航空航天系列.光电连接元件.试验方法.第6101部分:光学元件.外观检查 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6101: Optical elements; Visual examination; German and English version EN 2591-6101:2001 |
| DIN EN 2591-611-2002 | 航空航天系列.光电连接件.试验方法.第611部分:光学元件.电缆附件有效性.电缆扭转 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 611: Optical elements; Effectiveness of cable attachment; Cable torsion; German and English version EN 2591-611:2001 |
| DIN EN 2591-612-2002 | 航空航天系列.光电连接件.试验方法.第612部分:光学元件.电缆附件有效性.电缆轴向压力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression; German and English version EN 2591-612:2002 |
| DIN EN 2591-613-2002 | 航空航天系列.电气和光学连接元件.试验方法.第613部分:光学元件.冲击试验; 德文版本 EN 2591-613:2002 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 613: Optical elements; Impact test; German version EN 2591-613:2002 |
| DIN EN 2591-614-2002 | 航空航天系列.电气和光学连接元件.试验方法.第614部分:光学元件.连接件径向压缩; 德文版本 EN 2591-614:200 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 614: Optical elements; Connector radial compression; German version EN 2591-614:2002 |
| DIN EN 2591-615-2002 | 航空航天系列.光电连接件.试验方法.第615部分:光学元件.恒温下电缆连接完整性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001 |
| DIN EN 2591-617-2002 | 航空航天系列.电气和光学连接元件.试验方法.第617部分:光学元件.温度循环; 德文版本 EN 2591-617:2002 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 617: Optical elements; Temperature cycling; German version EN 2591-617:2002 |
| DIN EN 2591-6301-2003 | 航空航天系列.光电连接件.试验方法.第6301部分:光学元件.耐热性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6301: Optical elements; Endurance at temperature; German and English version EN 2591-6301:2001 |
| DIN EN 2591-6303-2003 | 航空航天系列.光电连接元件.试验方法.第6303部分:光学元件.冷/低压和湿热试验 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6303: Optical elements; Cold/low pressure and damp heat; German and English version EN 2591-6303:2001 |
| DIN EN 2591-6305-2003 | 航空航天系列.光电连接件.试验方法.第6305部分:光学元件.温度急剧变化 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6305: Optical elements; Rapid change of temperature; German and English version EN 2591-6305:2001 |
| DIN EN 2591-6306-2003 | 航空航天系列.光电连接件.试验方法.第6306部分:光学元件.长霉 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6306: Optical elements; Mould growth; German and English version EN 2591-6306:2001 |
| DIN EN 2591-6307-2003 | 航空航天系列.光电连接件.试验方法.第6307部分:光学元件.盐雾 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6307: Optical elements; Salt mist; German and English version EN 2591-6307:2001 |
| DIN EN 2591-6314-2003 | 航空航天系列.光电连接件.试验方法.第6314部分:光学元件.低气压浸渍试验 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6314: Optical elements; Immersion at low air pressure; German and English version EN 2591-6314:2001 |
| DIN EN 2591-6315-2003 | 航空航天系列.光电连接件.试验方法.第6315部分:光学元件.耐流体性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6315: Optical elements; Fluid resistance; German and English version EN 2591-6315:2001 |
| DIN EN 2591-6316-2003 | 航空航天系列.光电连接件.试验方法.第6316部分:光学元件.耐臭氧性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6316: Optical elements; Ozone resistance; German and English version EN 2591-6316:2001 |
| DIN EN 2591-6317-2003 | 航空航天系列.光电连接件.试验方法.第6317部分:光学元件.易燃性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6317: Optical elements; Flammability; German and English version EN 2591-6317:2001 |
| DIN EN 2591-6318-2003 | 航空航天系列.光电连接件.试验方法.第6318部分:光学元件.耐火性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6318: Optical elements; Fire resistance; German and English version EN 2591-6318:2001 |
| DIN EN 2591-6321-2002 | 航空航天系列.电气和光学连接元件.试验方法.第6321部分:光学元件.湿热循环试验 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6321: Optical elements; Damp heat, cyclic test; German version EN 2591-6321:2002 |
| DIN EN 2591-6323-2002 | 航空航天系列.电气和光学连接元件.试验方法.第6323部分:光学元件.热冲击(密封装置); 德文版本 EN 2591-6323 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6323: Optical elements; Thermal shock (hermetically sealed devices); German version EN 2591-6323:2002 |
| DIN EN 2591-6324-2003 | 航空航天系列.光电连接件.试验方法.第6324部分:光学元件.层间密封 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6324: Optical elements; Interfacial sealing; German and English version EN 2591-6324:2001 |
| DIN EN 2591-6401-2003 | 航空航天系列.光电连接件.试验方法.第6401部分:光学元件.恒定加速度 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6401: Optical elements; Acceleration steady state; German and English version EN 2591-6401:2001 |
| DIN EN 2591-6402-2003 | 航空航天系列.光电连接件.试验方法.第6402部分:光学元件.冲击 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6402: Optical elements; Chocs; German and English version EN 2591-6402:2001 |
| DIN EN 2591-6403-2003 | 航空航天系列.光电连接元件.试验方法.第6403部分:光学元件.振动 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6403: Optical elements; Vibrations; German and English version EN 2591-6403:2001 |
| DIN EN 2591-6404-2003 | 航空航天系列.光电连接元件.试验方法.第6404部分:光学元件.横向荷载 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6404: Optical elements; Transverse load; German and English version EN 2591-6404:2001 |
| DIN EN 2591-6405-2003 | 航空航天系列.光电连接件.试验方法.第6405部分:光学元件.轴向荷载 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6405: Optical elements; Axial load; German and English version EN 2591-6405:2001 |
| DIN EN 2591-6406-2003 | 航空航天系列.光电连接件.试验方法.第6406部分:光学元件.机械耐久性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6406: Optical elements; Mechanical endurance; German and English version EN 2591-6406:2001 |
| DIN EN 2591-6414-2003 | 航空航天系列.光电连接件.试验方法.第6414部分:光学元件.脱钩拉索式光学连接件的失配性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6414: Optical elements; Unmating of lanyard release optical connection elements; German and English version EN 2591-6414:2001 |
| DIN EN 2591-6415-2003 | 航空航天系列.光电连接件.试验方法.第6415部分:光学元件.探针探伤 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6415: Optical elements; Test probe damage; German and English version EN 2591-6415:2001 |
| DIN EN 2591-701-2002 | 航空航天系列.光电连接件.试验方法.第701部分:电气元件.耦合器开路阻抗测量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 701: Electrical elements; Measurement of open circuit impedance of couplers; German and English version EN 2591-701:2001 |
| DIN EN 2591-702-2002 | 航空航天系列.光电连接件.试验方法.第702部分:电气元件耦合器信号失真测量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 702: Electrical elements; Measurement of signal distortion of couplers; German and English version EN 2591-702:2001 |
| DIN EN 2591-703-2002 | 航空航天系列.光电连接件.试验方法.第703部分:电气元件.耦合器共模抑制比测量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 703: Electrical elements; Common mode rejection of couplers; German and English version EN 2591-703:2001 |
| DIN EN 2591-704-2002 | 航空航天系列.光电连接件.试验方法.第704部分:电气元件.耦合器变压器转换比测量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 704: Electrical elements; Measurement of turns ratio on a transformer used in a coupler; German and English version EN 2591-704:2001 |
| DIN EN 2591-705-2002 | 航空和航天系列.光电连接件.试验方法.第705部分:电气元件.耦合器短线输入阻抗测量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 705: Electrical elements; Measurement of stub input impedance of couplers; German and English version EN 2591-705:2001 |
| DIN EN 2591-706-2002 | 航空航天系列.光电连接件.试验方法.第706部分:电气元件.传输试验 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 706: Electrical elements; Transmission test; German and English version EN 2591-706:2001 |
| DIN EN 2591-707-2002 | 航空航天系列.光电连接件.试验方法.第707部分:电气元件.总线或短线终端特性阻抗测量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 707: Electrical elements; Measurement of characteristic impedance of a bus or a stub terminator; German and English version EN 2591-707:2001 |
| DIN EN 2591-708-2002 | 航空航天系列.光电连接件.试验方法.第708部分:电气元件.耦合器表面传输阻抗测量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 708: Electrical elements; Measurement of surface transfer impedance of couplers; German and English version EN 2591-708:2001 |
| DIN EN 2591-709-2002 | 航空航天系列.光电连接件.试验方法.第709部分:电气元件.耦合器拉伸强度测量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 709: Electrical elements; Tensile strength of couplers; German and English version EN 2591-709:2001 |
| DIN EN 2591-7301-2003 | 航空航天系列.光电连接件.试验方法.第7301部分:电气元件.耦合器耐热性 | Aeospace series - Elements of electrical and optical connection; Test methods - Part 7301: Electrical elements; Temperature endurance of couplers; German and English version EN 2591-7301:2001 |
| DIN EN 2592-1991 | 航空航天.温度补偿的额定电流25A以下三极断路开关.产品标准 | Aerospace series; three-pole circuit breakers; temperature compensated rated currents up to 25 A; product standard; german version EN 2592:1990 |
| DIN EN 2596-2007 | 航空航天系列.飞行控制杆用镀镉的、带径向锯齿的锁紧耐腐蚀钢制垫圈.尺寸 | Aerospace series - Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods - Dimensions; German and English version EN 2596:2006 |
| DIN EN 2597-1998 | 航空航天系列.碳纤维增强的塑料.无向叠层材料.垂直纤维方向的拉力试验 | Aerospace series - Carbon fibre reinforced plastics; unidirectional laminates - Tensile test perpendicular to the fibre direction; German version EN 2597:1998 |
| DIN EN 2599-2002 | 航空航天系列.铝和铝合金带材.厚度a为0.25mm-3.2mm.尺寸 | Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm a 3,2 mm; Dimensions; German version EN 2599:2001 |
| DIN EN 2601-1996 | 航空航天系列.可调叉头.交货技术条件 | Aerospace series - Fork ends, adjustable - Technical specification; German version EN 2601:1996 |
| DIN EN 2602-2007 | 航空航天系列.带锁环的螺纹适配器用端口.几何形状 | Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2602:2005 |
| DIN EN 2603-2007 | 航空航天系列.带锁环的螺纹适配器用端口.几何形状 | Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2603:2005 |
| DIN EN 2604-2007 | 航空航天系列.带锁环的螺纹适配器用8°30'接口.几何形状 | Aerospace series - 8° 30' interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2604:2005 |
| DIN EN 2605-2007 | 航空航天系列.带锁环的螺纹适配器用24°接口.几何形状 | Aerospace series - 24° interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2605:2005 |
| DIN EN 2607-2007 | 航空航天系列.用锁住方式连接适配器用O型密封圈.测量 | Aerospace series - O-rings for adaptors, threaded, with lockring - Survey; German and English version EN 2607:2005 |
| DIN EN 2608-2006 | 航空航天系列.8°30'带锁环的螺纹适配器的安装和移动要求 | Aerospace series - Installation and removal requirements for 8°30' adaptors, threaded, with lockring; German and English version EN 2608:2005 |
| DIN EN 2609-1989 | 航空航天系列.铜锌合金制操纵钢索的旋转套筒.尺寸和负荷 | Aerospace series; turnbarrels, control cable in copper-zinc alloys; dimensions and loads |
| DIN EN 2617-2003 | 航空航天系列.厚度6mm a 100mm的钛和钛合金板.尺寸 | Aerospace series - Plates in titanium and titanium alloys, thickness 6 mma100 mm - Dimensions; German and English version EN 2617:2001 |
| DIN EN 2622-2003 | 航空航天系列.直径为3.2mm D 100mm的耐热合金液压圆形管.尺寸 | Aerospace series - Circular tubes, for fluids in heat resisting alloys, diameter 3,2 mmD100 mm - Dimensions; German and English version EN 2622:2001 |
| DIN EN 2630-1994 | 航空航天系列.AL-P7009-T74511铝合金.带外围粗糙颗粒控制设备的挤压棒材和型材.a或D为125mm | Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections; a or D 125 mm, with peripheral coarse grain control; German version EN 2630:1993 |
| DIN EN 2632-2007 | 航空航天系列.铝合金AL-P7075-T73511.挤压棒材和型材.带周边粗晶粒控制的.a或D≤100mm | Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 2632:2005 |
| DIN EN 2633-1994 | 航空航天系列.铝合金AL-P2024-T3511;挤压棒材和截面：1,2 mm a或D 150 mm,周边粗 | Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections; 1,2 mm a or D 150 mm, with peripheral coarse grain control; German version EN 2633:1993 |
| DIN EN 2635-2006 | 航空航天系列.铝合金AL-P2014A.T6511.挤压棒材和型材.a/D≤200mm周边粗粒控制 | Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bar and section - a or D 200 mm with peripheral coarse grain control; German and English version EN 2635:2005 |
| DIN EN 2636-1994 | 航空航天系列.AL-P6082-T6铝合金.带外围粗糙颗粒控制设备的挤压棒材和型材.a或D为200mm | Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections; a or D 200 mm, with peripheral coarse grain control; German version EN 2636:1993 |
| DIN EN 2641-1989 | 航空航天.飞机操纵钢索组件.组合和尺寸 | Aerospace series; control cable assemblies; combinations and dimensions |
| DIN EN 2644-1998 | 航空航天系列.飞行控制装置的操作杆组件.技术规范 | Aerospace series - Rod assemblies for flight controls - Technical specification; German version EN 2644:1997 |
| DIN EN 2645-2007 | 航空航天系列.用锁住方式连接适配器用环状物.尺寸 | Aerospace series - Lockrings for adaptors, threaded, with lockring - Dimensions; German and English version EN 2645:2005 |
| DIN EN 2647-2007 | 航空航天系列.镀隔合金钢加 MoS<下标2> 润滑剂的球形座自锁六角螺母.等级:900MPa(环境温度)/235℃ | Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2647:2006 |
| DIN EN 2648-1995 | 航空航天系列.镀隔合金钢凹面垫圈; 德文版本 EN 2648:1995 | Aerospace series - Washers, concave, in alloy steel, cadmium plated; German version EN 2648:1995 |
| DIN EN 2649-1995 | 航空航天系列.镀镉合金钢全螺纹带槽大柱头螺钉.等级:900MPa(室温下)/235°C; 德文版本 EN 2649:1995 | Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2649:1995 |
| DIN EN 2650-1996 | 航空航天.钝化耐蚀钢螺纹长度接近顶部带槽平头螺丝.等级:600 MPa(室温)/425℃ | Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C ; German version EN 2650:1996 |
| DIN EN 2651-1996 | 航空航天系列.镀锡黄铜制螺纹接近顶部带槽平头螺丝.等级:300MPa(室温)/80℃ | Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996 |
| DIN EN 2652-1997 | 航空航天系列.镀镉合金制螺纹接近顶部带槽的100度沉头螺丝.等级900MPa(室温)/235℃ | Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2652:1997 |
| DIN EN 2653-1996 | 航空航天系列.钝化耐蚀钢螺纹长度接近顶部带槽100度沉头螺丝.等级:600 MPa(室温)/425℃ | Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2653:1996 |
| DIN EN 2654-1996 | 航空航天系列.镀锡黄铜螺纹接近顶部带槽100度沉头螺丝.等级:300MPa(室温)/80℃ | Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2654:1996 |
| DIN EN 2656-2002 | 航空航天系列.管道连接件.焊接连接端头.几何图形; 德文版本 EN 2656:2001 | Aerospace series - Pipe coupling - Coupling end, welded; Geometric configuration; German version EN 2656:2001 |
| DIN EN 2665-001-1999 | 航空航天系列.,额定电流为20A至50A的三极的温度补偿电路断路保护器.第001部分:交货规范 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification; German version EN 2665-001:1999 |
| DIN EN 2665-003-1999 | 航空航天系列.额定电流为20A至50A的的三极的温度补偿电路断路保护器.第003部分:米制螺纹端子 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals; product standard; German version EN 2665-003:1999 |
| DIN EN 2665-004-1999 | 航空航天系列.额定电流为20A至50A的温度补偿的三极电路断路保护开关.第004部分:UNC螺纹端子.产品标准 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard; German version EN 2665-004:1999 |
| DIN EN 2667-6-2003 | 航空航天系列.非金属材料.泡沫结构粘合剂.试验方法.第6部分:测定吸水率 | Aerospace series - Non-metallic materials; Foaming structural adhesives; Test methods - Part 6: Determination of water absorption; German and English version EN 2667-6:2001 |
| DIN EN 2680-2007 | 航空和航天系列.米制系列MOS2润滑的钝化镀镉合金钢双耳自准、锁紧浮动地脚螺母.等级:900MPa/235℃ | Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2680:2006 |
| DIN EN 2681-2006 | 航空航天系列.铝合金AL-P7010-T74.手锻和模锻件.a ≤150 mm | Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2681:2004 |
| DIN EN 2684-2006 | 航空航天系列.铝合金AL-P2124-T351.板材.6mm | Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm ＜ a ≤ 140 mm; German and English version EN 2684:2004 |
| DIN EN 2687-2006 | 航空航天系列.铝合金AL-P7010-T7451.板材.6mm | Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm ＜ a ≤ 160 mm; German and English version EN 2687:2004 |
| DIN EN 2693-2006 | 航空航天系列.铝合金AL-P5086-H111.薄板和带材.0.3mm<=a<=6mm | Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2693:2005 |
| DIN EN 2694-2006 | 航空航天系列.铝合金AL-P6061-T6或T62.薄板材和带材.0.4mm<=a<=6mm | Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2694:2005 |
| DIN EN 2695-2006 | 航空航天系列.铝合金AL-P6081-T6.薄板和带材.0.3mm<=a<=6mm | Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2695:2005 |
| DIN EN 2696-2006 | 航空航天系列.铝合金AL-P7075-T6或T62.薄板材和带材.0.4mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2696:2005 |
| DIN EN 2702-2006 | 航空航天系列.铝合金AL-P6061.T6或T62.拉制或挤压棒材和型材.a或D<=200mm | Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D 200 mm; German and English version EN 2702:2005 |
| DIN EN 2703-2006 | 航空航天系列.铝合金AL-P2024-T4或T42.覆层薄板和带材.0.3mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2703:2005 |
| DIN EN 2713-002-2007 | 航空航天系列.通用单芯和多芯电缆.工作温度:-55℃～200℃.第002部分:屏蔽和带外套电缆.总则 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 002: Screened and jacketed - General; German and English version EN 2713-002:2006 |
| DIN EN 2713-003-2007 | 航空航天系列.通用的单芯和多芯电缆.工作温度范围为-55℃～200℃.第003部分:可UV激光印字的屏蔽(螺旋形的) | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard; German and English version EN 2713-003:2005 |
| DIN EN 2713-004-2007 | 航空航天系列.一般用单股和多股电缆.工作温度为-55℃～200℃.第004部分:可喷墨印制的屏蔽(编织的)和护套电 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard; German and English version EN 2713-004:2006 |
| DIN EN 2713-005-2007 | 航空航天系列.一般用途用单芯和多芯电缆.工作温度为-55℃～200℃.第005部分:CO2可激光打印屏蔽(螺旋的)和置 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 005: Screened (spiral) and jacketed, CO<(Index)2>-laser printable - Product standard; German and English version EN 2713-005:2006 |
| DIN EN 2713-006-2007 | 航空航天系列.一般用单股和多股电缆.工作温度为-55℃～200℃.第006部分:二氧化碳激光印制的屏蔽(编织的)和 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 006: Screened (braided) and jacketed, CO<(Index)2>-laser printable - Product standard; German and English version EN 2713-006:2006 |
| DIN EN 2713-007-2007 | 航空航天系列.通用的单芯和多芯电缆.工作温度范围为-55℃～260℃.第007部分:可UV激光印字的、屏蔽(螺旋形的 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2713-007:2005 |
| DIN EN 2713-008-2007 | 航空航天系列.一般用途用单芯和多芯电缆.工作温度为-55℃～200℃.第008部分:可UV激光打印屏蔽的(编织的)和 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard; German and English version EN 2713-008:2006 |
| DIN EN 2713-009-2007 | 航空航天系列.一般用单股和多股电缆.工作温度为-55℃～200℃.第009部分:YAG X3激光印制的屏蔽(编织的)和护 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard; German and English version EN 2713-009:2006 |
| DIN EN 2713-010-2007 | 航空航天系列.一般用单股和多股电缆.工作温度为-55℃～200℃.第010部分:YAG X3激光印制的屏蔽(编织的)和护 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard; German and English version EN 2713-010:2006 |
| DIN EN 2713-011-2007 | 航空航天系列.一般用途用单芯和多芯电缆.工作温度为-55℃～200℃.第011部分:可UV激光打印屏蔽的(螺旋式的) | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 011: Silver plated copper, screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2713-011:2006 |
| DIN EN 2714-002-2007 | 航空航天系列.通用的单芯和多芯电缆.工作温度范围为-55℃～260℃.第002部分:屏蔽和带护套的.产品标准 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: Screened and jacketed - General; German and English version EN 2714-002:2005 |
| DIN EN 2714-003-2007 | 航空航天系列.通用的单芯和多芯电缆.工作温度范围为-55℃～260℃.第003部分:可喷墨印字的屏蔽和带护套的.产 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard; German and English version EN 2714-003:2005 |
| DIN EN 2714-004-2007 | 航空航天系列.一般用途用单芯和多芯电缆.工作温度为-55℃～260℃.第004部分:可喷墨打印屏蔽的(编织的)和置 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard; German and English version EN 2714-004:2006 |
| DIN EN 2714-006-2007 | 航空航天系列.一般用途用单芯和多芯电缆.工作温度为-55℃～260℃.第006部分:可CO<(指数)2>激光打印屏蔽的( | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 006: Screened (braided) and jacketed, CO<(Index)2> laser printable - Product standard; German and English version EN 2714-006:2006 |
| DIN EN 2714-007-2007 | 航空航天系列.单芯和多芯电缆一般用途.工作温度-55℃～260℃.第007部分:螺旋屏蔽和置于壳内的紫外激光可印 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2714-007:2005 |
| DIN EN 2714-008-2007 | 航空航天系列.一般用途用单芯和多芯电缆.工作温度为-55℃～260℃.第008部分:可UV激光打印屏蔽的(编织的)和 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard; German and English version EN 2714-008:2006 |
| DIN EN 2714-010-2007 | 航空航天系列.一般用途用单芯和多芯电缆.工作温度为-55℃～260℃.第010部分:可YAG X3激光打印屏蔽的(编织的 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard; German and English version EN 2714-010:2006 |
| DIN EN 2714-011-2007 | 航空航天系列.通用的单芯和多芯电缆.工作温度范围为-55℃～260℃.第011部分:DM族、可UV激光印字的、屏蔽(螺 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2714-011:2005 |
| DIN EN 2714-012-2007 | 航空航天系列.通用的单芯和多芯电缆.工作温度范围为-55℃～260℃.第012部分:DM族、可UV激光印字的、屏蔽(编 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product standard; German and English version EN 2714-012:2005 |
| DIN EN 2714-013-2006 | 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.第013部分:DM族、屏蔽式（螺旋式 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 013: DR family, screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2714-013:2005 |
| DIN EN 2731-2006 | 航空航天系列.镁合金钢 MG-C46001-T6.砂型铸造 | Aerospace series - Magnesium alloy MG-C46001-T6 - Sand casting; German and English version EN 2731:2005 |
| DIN EN 2732-2005 | 航空航天系列.镁合金MG-C46001-T6.冷型铸造 | Aerospace series - Magnesium alloy MG-C46001-T6 - Chill casting; German and English version EN 2732:2005 |
| DIN EN 2743-2003 | 航空航天系列.纤维增强塑料.测试未老化材料前的标准调整程序 | Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001 |
| DIN EN 2744-1992 | 航空航天.非金属材料.优选的试验温度 | Aerospace series; non-metallic materials; preferred test temperatures; german version EN 2744:1992 |
| DIN EN 2746-1998 | 航空航天系列.玻璃纤维增强的塑料.绕曲试验.三点弯曲试验法 | Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998 |
| DIN EN 2747-1998 | 航空航天系列.玻璃纤维增强塑料.拉伸试验 | Aerospace series - Glass fibre reinforced plastics - Tensile test; German version EN 2747:1998 |
| DIN EN 2752-1990 | 航空航天.带圆柱形划孔双面截短法兰自锁式铆接螺母.等级1100MPa/223℃ | Aerospace; nuts, anchor, self locking, fixed, two lug, reduced series, with counterbore; classification: 1100 MPa/235 °C; german version EN 2752:1989 |
| DIN EN 2753-1996 | 航空航天系列.合金钢镀镉MoS(角注2)润滑带圆柱形沉头孔单面法兰自锁铆接螺母.等级 1100MPa(室温)/235℃ | Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2753:1996 |
| DIN EN 2781-1998 | 航空航天系列.非金属材料.结构件胶粘剂.试验方法.底层涂料厚度的测定 | Aerospace series - Non-metallic materials; structural adhesives - Test methods; determination of the primer thickness; German version EN 2781:1998 |
| DIN EN 2790-1991 | 航空航天系列.啮合长度为螺纹直径1.5倍的螺纹杆的带自润滑内衬的自校准的可调节控制杆端部.尺寸和负载 | Aerospace series; rod-ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank, with engagement: 1,5 × thread diameter; dimensions and loads; german version EN 2790:1991 |
| DIN EN 2791-1991 | 航空航天系列.啮合长度为螺纹直径1.5倍的螺纹杆和单叉的可调节控制杆端部.尺寸和负载 | Aerospace series; rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter; dimensions and loads; german version EN 2791:1991 |
| DIN EN 2792-1991 | 航空航天系列.啮合长度为螺纹直径1.5倍的螺纹杆和双叉的可调节控制杆端部.尺寸和负载 | Aerospace series; rod-ends, adjustable, double fork and threaded shank with engagement: 1,5 × thread diameter; dimensions and loads; german version EN 2792:1991 |
| DIN EN 2794-001-1999 | 航空航天系列.额定电流为20A至50A的温度补偿的单极电路断路保护开关.第001部分:技术规范 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification; German version EN 2794-001:1999 |
| DIN EN 2794-003-1999 | 航空航天系列.额定电流为20A至50A的温度补偿的单极电路断路保护开关.第003部分:米制螺纹端子.产品标准 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals; product standard; German version EN 2794-003:1999 |
| DIN EN 2794-004-1999 | 航空航天系列.额定电流为20A至50A的单极的恒温补偿电路断路保护开关.第004部分:UNC螺纹端子.产品标准 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard; German version EN 2794-004:1999 |
| DIN EN 2802-2005 | 航空航天系列.铝合金AL-P7475-T761.薄板和带材.0.6 mm a 6 mm | Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm a 6 mm; German and English version EN 2802:2005 |
| DIN EN 2803-2005 | 航空航天系列.铝合金AL-P7475-T761.覆层薄板和带材.1.0 mm a 6 mm | Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 2803:2005 |
| DIN EN 2808-1997 | 航空航天系列.钛和钛合金阳极氧化 | Aerospace series - Anodizing of titanium and titanium alloys; German version EN 2808:1997 |
| DIN EN 2809-2001 | 航空航天系列.耐热钢制镀银标称对边高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃; 德文版本 EN | Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2809:2001 |
| DIN EN 2810-2001 | 航空航天系列.耐热钢制钝化标称对边高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃; 德文版本 EN | Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2810:2001 |
| DIN EN 2821-2007 | 航空航天系列.FE-PM1802(X5CrNiCu15-5)型钢.自耗电极再熔炼.溶解处理和沉淀处理.加工用棒材.a或D≤200mm.R< | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D 200 mm - R<(Index)m> 1310 MPa; German and English version EN 2821:2007 |
| DIN EN 2828-1993 | 航空航天.用抛光法试验金属涂层的粘附强度 | Aerospace series; adhesion test for metallic coatings by burnishing; german version EN 2828:1993 |
| DIN EN 2829-1995 | 航空航天系列.采用喷丸处理法对金属涂层进行附着强度试验; 德文版本 EN 2829:1994 | Aerospace series - Adhesion test for metallic coatings by shot peening; German version EN 2829:1994 |
| DIN EN 2830-1993 | 航空航天.用切剪法试验金属涂层的粘附强度 | Aerospace series; adhesion test for metallic coatings by shearing action; german version EN 2830:1993 |
| DIN EN 2831-1993 | 航空航天.钢的氢脆性.慢速弯曲试验 | Aerospace series; hydrogen embrittlement of steels; test by slow bending; german version EN 2831:1993 |
| DIN EN 2832-1993 | 航空航天.钢的氢脆性.缺口试样试验 | Aerospace series; hydrogen embrittlement of steels; notched specimen test; german version EN 2832:1993 |
| DIN EN 2851-1992 | 航空航天.发动机之外的部件和组件的标记.图纸上的说明 | Aerospace series; marking of parts and assemblies other than engines; indications on drawings; german version EN 2851:1989 |
| DIN EN 2853-2006 | 航空航天系列.导体EN 2083的电缆的额定电流 | Aerospace series - Current ratings for electrical cables with conductor EN 2083; German and English version EN 2853:2005 |
| DIN EN 2856-2007 | 航空和航天系列.自锁固定式锐角缩径有沉孔的地脚螺母.分类:1100MPa/235℃ | Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1100 MPa/235 °C; German and English version EN 2856:2006 |
| DIN EN 2858-2-1994 | 航空航天系列.钛和钛合金.锻坯和锻件.技术规范.第2部分:锻坯 | Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 2: forging stock; German version EN 2858-2:1994 |
| DIN EN 2859-1995 | 航空航天系列.镀镉合金钢短螺纹公称六角紧公差螺栓.等级:1100MPa(室温)/235℃; 德文版本 EN 2859:1995 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2859:1995 |
| DIN EN 2870-1996 | 航空航天系列.钛合金阳极化MoS2润滑十二角紧配合螺丝.等级 1100MPa(室温)/315℃ | Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996 |
| DIN EN 2874-1996 | 航空航天系列.钝化耐高温镍基合金中长螺纹十二角紧配合螺丝.等级 1550MPa(室温)/315℃ | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996 |
| DIN EN 2881-2007 | 航空和航天系列.米制系列MOS2润滑的钝化耐腐蚀、耐燃钢沉头双耳密封锁紧浮动地脚螺母.等级:900MPa/120℃ | Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2881:2006 |
| DIN EN 2884-1996 | 航空航天系列.MoS2润滑阳极化钛合金短螺纹带翼型十字槽平头螺钉.等级:1100MPa(室温)/315℃ | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996 |
| DIN EN 2885-1996 | 航空航天系列.镀镉合金钢短螺纹带翼型十字槽平头螺钉.等级:900MPa(室下)/235℃ | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2885:1996 |
| DIN EN 2886-1996 | 航空航天系列.镀铬合金钢短螺纹带翼形十字槽的平头紧配合螺丝.等级:900MPa/235℃ | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa/235 °C; German version EN 2886:1996 |
| DIN EN 2887-1995 | 航空航天系列.钝化耐蚀钢短螺纹公称六角螺拴.等级:600MPa(室温下)/425℃; 德文版本 EN 2887:1995 | Aerospace series - bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2887:1995 |
| DIN EN 2888-2007 | 航空航天系列.钝化耐腐蚀短螺纹标准杆粗公差普通六角头米制螺钉.等级:600MPa(室温下)/425℃ | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2888:2006 |
| DIN EN 2889-2007 | 航空航天系列.镀镉合金钢短螺纹粗公差普通六角头米制螺钉.等级:900MPa(室温下)/235℃;德文和英文版本 EN 28 | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2889:2006 |
| DIN EN 2897-1996 | 航空航天系列.镀铬合金钢短螺纹带翼形十字槽的平头紧配合螺丝.等级:1100MPa/235℃ | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa/235 °C; German version EN 2897:1996 |
| DIN EN 2906-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 自锁十二角螺母.等级:1100 MPa (室温) 摄氏 650 度; 德文版本 EN 2 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2906:1994 |
| DIN EN 2907-1995 | 航空航天系列.镀银耐高温钢FE-PA92HT(A286)自锁十二角螺母.等级:1100MPa(室温)/650℃; 德文版本 EN 2907:19 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2907:1995 |
| DIN EN 2908-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 深埋头孔自锁十二角螺母.等级:1100 MPa 室温)摄氏 650 度 ; 德文版 | Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2908:1994 |
| DIN EN 2909-1995 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 深沉孔自锁镀银十二角螺母.等级:1100 MPa (室温) 摄氏 650 度; 德 | Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2909:1995 |
| DIN EN 2910-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 自锁铆钉体螺母.等级:1100 MPa (室温) 摄氏 650 度; 德文版本 EN 2 | Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2910:1994 |
| DIN EN 2911-1995 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 自锁镀银铆钉体螺母.等级:1100 MPa (室温) 摄氏 650 度; 德文版本 | Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2911:1995 |
| DIN EN 2912-1996 | 航空航天系列.铝合金阳极化或铬酸钝化的大外径平垫圈 | Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated; German version EN 2912:1996 |
| DIN EN 2913-2000 | 航空和航天系列.大直径镀镉钢制平垫圈 | Aerospace series - Washers, flat, large diameter, in steel, cadmium plated; German version EN 2913:1999 |
| DIN EN 2914-1996 | 航空和航天.耐高温钢制钝化的大外径平垫圈 | Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated; German version EN 2914:1996 |
| DIN EN 2925-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 长螺纹轻柄十二角头螺栓.等级:900 MPa (室温)摄氏 650 度; 德文版 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2925:1994 |
| DIN EN 2926-1996 | 航空航天系列.耐高温钢FE-FA92HT(A286制镀银长螺纹细螺杆十二角螺丝钉.等级:900 Mpa(室温)/650℃ | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2926:1996 |
| DIN EN 2927-1996 | 航空航天系列.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(室温)/650℃ | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2927:1996 |
| DIN EN 2928-1996 | 航空航天系列.耐高温镍基合金NI-P100HT(因康镍 718)镀银长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(室温)/650 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2928:1996 |
| DIN EN 2929-1996 | 航空航天系列.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1210 Mpa(室温)/730℃ | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2929:1996 |
| DIN EN 2930-1996 | 航空航天系列.耐高温镍基合金NI-P101HT(Waspaloy 一种耐高温热镍基合金)镀银长螺纹细螺杆十二角螺丝钉.等级 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperatur)/730 °C; German version EN 2930:1996 |
| DIN EN 2931-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 长螺纹轻柄T型头螺栓.等级:900 MPa (室温)摄氏 650 度; 德文版本 E | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2931:1994 |
| DIN EN 2932-1996 | 航空航天系列.耐高温钢FE-PA92HT(A286)镀银长螺纹细螺杆T字头螺丝钉.等级:900 Mpa(室温)/650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2932:1996 |
| DIN EN 2933-1996 | 航空航天系列.高温镍基合金HI-P100HT(因康镍718)长螺纹细杆T字头螺栓.等级:1275 MPa(室温)/650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2933:1996 |
| DIN EN 2934-1996 | 航空航天系列.高温镍基合金HI-P100HT(因康镍718)长螺纹,细杆镀银T字头螺栓.等级:1275 MPa(室温)/650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2934:1996 |
| DIN EN 2935-1996 | 航空航天系列.高温镍基合金HI-P101HT(沃斯帕落伊合金)长螺纹细杆T字头螺栓.等级:1210 MPa(室温)/730℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2935:1996 |
| DIN EN 2936-1996 | 航空航天系列.高温镍基合金HI-P101HT(沃斯帕落伊合金)长螺纹细杆镀银T字头螺栓.等级:1210 MPa(室温)/730℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 °C; German version EN 2936:1996 |
| DIN EN 2937-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 全螺纹六角头螺钉.等级:900 MPa (室温)摄氏 650 度; 德文版本 EN 2 | Aerospace series - Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2937:1994 |
| DIN EN 2938-1995 | 航空航天系列.镀银耐高温钢(FE-PA92HT(A286)全螺纹六角头螺钉.等级:900MPa(室温)/650℃; 德文版本 EN 2938: | Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2938:1995 |
| DIN EN 2939-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 全螺纹翼型十字槽 100 度沉头螺钉.等级:900 MPa (室温)摄氏 650 度 | Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2939:1994 |
| DIN EN 2940-1995 | 航空航天系列.镀银耐高温钢FE-PA92HT(A286)全螺纹偏置十字槽100度沉头螺钉.等级:900 MPa(室温)/650℃; 德文 | Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2940:1995 |
| DIN EN 2942-1998 | 航空航天系列.,NI-PH2801(因康X750)耐高温镍基合金制镀银自锁螺旋形线圈螺纹衬套 | Aerospace series - Insert, screw thread, helical coil, self-locking, in head resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated; German version EN 2942:1998 |
| DIN EN 2943-1998 | 航空航天系列.自锁绕旋线螺纹镶嵌件.技术规范 | Aerospace series - Inserts, screw thread, helical coil, self-locking - Technical specification; German version EN 2943:1998 |
| DIN EN 2944-1998 | 航空航天系列.FE-PA3004耐蚀钢制自锁螺旋形线圈螺纹衬套 | Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting alloy FE-PA3004; German version EN 2944:1998 |
| DIN EN 2945-1998 | 航空航天系列.自锁螺旋形线圈螺纹衬套.组装程序 | Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure; German version EN 2945:1998 |
| DIN EN 2947-2007 | 航空航天系列.FE-PA3004(X10CrNi18-09)型钢.非热处理.冷拉制钢丝.a或D≤2.3mm | Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D 2,3 mm; German and English version EN 2947:2006 |
| DIN EN 2948-1996 | 航空航天系列.钝化耐高温钢有耳锁紧垫圈 | Aerospace series - Washers, tab, in heat resisting steel, passivated; German version EN 2948:1996 |
| DIN EN 2949-1996 | 航空航天系列.钝化耐蚀钢锁紧垫圈 | Aerospace series - Washers, wire locking, in corrosion resisting steel - passivated; German version EN 2949:1996 |
| DIN EN 2955-1993 | 航空航天系列.钛和钛合金废料回收 | Aerospace series; recycling of titanium and titanium alloy scrap; German version EN 2955:1993 |
| DIN EN 2955/A1-1995 | 航空航天系列.钛和钛合金废料的再加工; 德文版本 EN 2955:1993/AC:1995 | Aerospace series - Recycling of titanium and titanium alloy scrap; German version EN 2955:1993/AC:1995 |
| DIN EN 2985-1996 | 航空航天系列.镍镉电池.A型结构 | Aerospace series - Nickel-cadmium batteries of format A type; German version EN 2985:1996 |
| DIN EN 2986-1996 | 航空航天系列.镍镉电池组.B型结构 | Aerospace series - Nickel-cadmium batteries - Of format B type; German version EN 2986:1996 |
| DIN EN 2987-1996 | 航空航天系列.镍镉电池.C型结构 | Aerospace series - Nickel-cadmium batteries of format C type; German version EN 2987:1996 |
| DIN EN 2988-1996 | 航空航天系列.镍镉电池.D型结构 | Aerospace series - Nickel-cadmium batteries of format D type; German version EN 2988:1996 |
| DIN EN 2991-1996 | 航空航天.镍隔电池.E型结构 | Aerospace series - Nickel-cadmium batteries - Of format E type; German version EN 2991:1996 |
| DIN EN 2993-1996 | 航空和航天.镍隔电池.F型结构 | Aerospace series - Nickel-cadmium batteries - Of format F type; German version EN 2993:1996 |
| DIN EN 2995-001-2007 | 航空航天系列.额定电流为1A～25A温度补偿的单极断路器.第001部分:技术规范 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 001: Technical specification; German and English version EN 2995-001:2006 |
| DIN EN 2995-004-2007 | 航空航天系列.额定电流1A～25A温度补偿的单极断路器.第004部分:带单独触点的断路器.产品标准 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard; German and English version EN 2995-004:2006 |
| DIN EN 2995-005-2007 | 航空航天系列.额定电流为1A～25A温度补偿的单极断路器.第005部分:带偏振信号触点的断路器.产品标准 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard; German and English version EN 2995-005-2006 |
| DIN EN 2997-1-1997 | 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第1部分:交货技术条 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 1: Technical specification; German version EN 2997-1:1997 |
| DIN EN 2997-10-1997 | 航空航天系列.使用温度为175℃、连续使用温度为200℃和最高温度为260℃的耐火或不耐火的带螺纹环连结的圆形 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 10: Protective cover for plug, product standard; German version EN 2997-10:1997 |
| DIN EN 2997-11-1997 | 航空航天系列.使用温度为175℃、连续使用温度为200℃和最高温度为260℃的耐火或不耐火的带螺纹环连结的圆形 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 11: Dummy receptacle; product standard; German version EN 2997-11:1997 |
| DIN EN 2997-2-1997 | 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第2部分:功率指标和 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 2: Specification of performance and contact arrangements; German version EN 2997-2:1997 |
| DIN EN 2997-3-1997 | 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第3部分:带方形安装 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 3: Square flange receptacle; product standard; German version EN 2997-3:1997 |
| DIN EN 2997-4-1997 | 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第4部分:带锁紧螺母 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 4: Jam-nut mounted receptacle; product standard; German version EN 2997-4:1997 |
| DIN EN 2997-5-1997 | 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第5部分:带正方安装 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 5: Hermetic, square flange receptacle; product standard; German version EN 2997-5:1997 |
| DIN EN 2997-6-1997 | 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第6部分:带锁紧螺母 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 6: Hermetic jam-nut mounted receptacle; product standard; German version EN 2997-6:1997 |
| DIN EN 2997-7-1997 | 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第7部分:带圆形焊接 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 7: Hermetic receptacle with round flange attached by soldering or brazing; product standard; German version EN 2997-7:1997 |
| DIN EN 2997-8-1997 | 航空和航天.运行温度常数为175℃,200℃,温度极限值为260℃,耐火或不耐火的,带螺纹连接器的电器图形插接器. | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 8: Plug; product standard; German version EN 2997-8:1997 |
| DIN EN 2997-9-1997 | 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第9部分:固定插接件 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 9: Protective cover for receptacle; product standard; German version EN 2997-9:1997 |
| DIN EN 2998-1996 | 航空航天系列.耐高温钢钝化平垫圈 | Aerospace series - Washers, flat, in heat resisting steel, passivated; German version EN 2998:1996 |
| DIN EN 3004-1997 | 航空航天系列.耐高温钢FE-PA2601(A286)MJ螺纹自锁螺母.等级:1100MPa/650℃.交货技术条件 | Aerospace series - Nuts, self-locking, MJ theads, in heat resisting steel FE-PA2601 (A286); classification: 1100 MPa (at ambient temperature)/650 °C; technical specification; German version EN 3004:1997 |
| DIN EN 3005-2005 | 航空航天系列.镀银或未涂覆的耐热镍基合金NI-PH1302制MJ螺纹自锁紧螺母.等级:1210 MPa(室温)/730 鳦.技术规 | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature)/730 °C - Technical specification; German and English version EN 3005:2004 |
| DIN EN 3006-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 轻柄长螺纹六角头螺钉.等级:900MPa (温度) 摄氏 650 度; 德文版本 | Aerospace series - Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3006:1994 |
| DIN EN 3007-1996 | 航空和航天.耐高温钢FE-PA92HT(A286)制镀银长螺纹细杆六角螺丝钉.等级900MPa(室温下)/650℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996 |
| DIN EN 3008-1998 | 航空航天系列.NI-P100HT(因康718)耐热镍基合金制长螺纹减轻杆的六角头螺栓.等级:1275 MPa/650℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa/650 °C; German version EN 3008:1998 |
| DIN EN 3009-1998 | 航空航天系列.NI-P100HT(因康718)耐热镍基合金制镀银的长螺纹减轻杆的六角头螺栓.等级:1275 MPa/650℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa/650 °C, silver plated; German version EN 3009:1998 |
| DIN EN 3010-1998 | 航空航天系列.NI-P101HT(Waspaloy)耐热镍基合金制长螺纹减轻杆的六角头螺栓.等级:1210 MPa/730℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification 1210 MPa/730 °C; German version EN 3010:1998 |
| DIN EN 3011-1998 | 航空航天系列.NI-P101HT (Waspaloy)耐热镍基合金制镀银的长螺纹减轻杆的六角头螺栓.等级:1210 MPa/730℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa/730 °C; German version EN 3011:1998 |
| DIN EN 3012-1995 | 航空航天系列.耐高温镍基合金HI-P101HT自锁十二角螺母.等级:1210Mpa(室温)/730℃; 德文版本 EN 3012:1995 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3012:1995 |
| DIN EN 3013-1995 | 航空航天系列.镀银耐高温镍基合金(NI-P101HT)自锁十二角螺母.等级:1210MPa(室温下)/730℃; 德文版本 EN 301 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3013:1995 |
| DIN EN 3014-2001 | 航空航天系列.耐热钢FE-PA2601(A286)制锯齿形自锁紧带柄螺母.等级:1100MPa(室温)/650℃; 德文版本 EN 3014: | Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification 1100 MPa (at ambient temperature)/650 °C; German version EN 3014:2001 |
| DIN EN 3015-2001 | 航空航天系列.耐热钢FE-PA2601(A286)制锯齿形镀银自锁紧带柄螺母.等级:1100MPa(室温)/650℃; 德文版本 EN 3 | Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification 1100 MPa (at ambient temperature)/650 °C; German version EN 3015:2001 |
| DIN EN 3026-1994 | 航空航天.干膜润滑的试验方法.钢试样的腐蚀试验 | Aerospace series; test method for dry film lubricants; corrosion test on steels specimens; German version EN 3026:1994 |
| DIN EN 3027-1994 | 航空航天.干膜润滑的试验方法.盐雾试验 | Aerospace series; test method for dry film lubricants; salt spray test; German version EN 3027:1994 |
| DIN EN 3030-1994 | 航空航天.干膜润滑的试验方法.固体含量 | Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994 |
| DIN EN 3032-1994 | 航空航天.干膜润滑的试验方法.厚度测量 | Aerospace series; test method for dry film lubricants; thickness measurement; German version EN 3032:1994 |
| DIN EN 3035-1996 | 航空航天系列.合金钢镀镉短螺纹带翼型十字槽的100度沉头配合螺钉.等级:1100MPa(室温)/235℃ | Aerospace series - 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa(at ambient temperature)/235 °C; German version EN 3035:1996 |
| DIN EN 3037-1996 | 航空航天系列.钛合金钢阳极处理MoS<2>锻造短螺纹带翼型十字槽平头配合螺钉.等级:1100MPa(室温)/315℃ | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS<(Index)2> lubricated - Classification: 1100 MPa(at ambient temperature)/315 °C; German version EN 3037:1996 |
| DIN EN 3038-1996 | 航空航天系列.耐蚀耐高温钢钝化处理短螺纹带翼型十字槽的平头配合螺钉.等级:1100MPa(室温)/425℃ | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3038:1996 |
| DIN EN 3044-1998 | 航空航天系列.自锁螺旋形线圈螺纹衬套的安装孔.设计标准 | Aerospance series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard; German version EN 3044:1998 |
| DIN EN 3045-1994 | 航空航天系列.飞机机架滚动轴承.钢制硬性单排滚珠轴承.直径系列0和2.缩小的间隙种类.尺寸和荷载 | Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3045:1993 |
| DIN EN 3046-1994 | 航空航天系列.飞机机架滚动轴承.镀镉钢制硬性单排滚珠轴承.直径系列0和2.缩小的间隙种类.尺寸和荷载 | Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel, cadmium plated; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3046:1993 |
| DIN EN 3047-1994 | 航空航天系列.飞机机架滚动轴承.耐腐蚀钢制硬性单排滚珠轴承.直径系列0和2.缩小的间隙种类.尺寸和荷载 | Aerospace series; bearings, airframe rolling; rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3047:1993 |
| DIN EN 3048-2006 | 航空航天系列.室温条件下高负荷、轻系列、带自润滑衬套的耐蚀钢关节轴承.尺寸和负载 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 3048:2001 |
| DIN EN 3049-1998 | 航空航天系列.低压缩变形的氟碳橡胶(FKM)O型环.硬度80IRHD(国际橡胶硬度标度) | Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998 |
| DIN EN 3050-1998 | 航空航天系列.低压缩变形的氟碳橡胶(FKM)O型环.技术规范 | Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification; German version EN 3050:1998 |
| DIN EN 3052-1994 | 航空航天.耐热耐蚀钢制钝感化处理的短螺纹紧公差杆标准六角头螺栓.等级:1100MPa(室温)/425摄氏度 | Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C (includes amendment A1:1993); German version EN 3052:1993 + A1:1993 |
| DIN EN 3053-1994 | 航空航天系列轴承.机体用滚动轴承.钢制单列自定心滚柱轴承.尺寸和负载; 德文版本 EN 3053:1994 | Aerospace series; bearings; airframe rolling, single row self-aligning roller bearings in steel; dimensions and loads; German version EN 3053:1994 |
| DIN EN 3054-1994 | 航空航天.机体用轴承.镀镉钢单列自定心滚柱轴承.尺寸和负载; 德文版本 EN 3054:1994 | Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in steel, cadmium plated; dimensions and loads; German version EN 3054:1994 |
| DIN EN 3055-1994 | 航空航天.机体用滚动轴承.耐腐蚀钢单列自定心滚柱轴承.尺寸和负载; 德文版本 EN 3055:1994 | Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in corrosion resisting steel; dimensions and loads; German version EN 3055:1994 |
| DIN EN 3056-1994 | 航空航天系列轴承.机体用轴承.钢制刚性双列滚珠轴承.尺寸和负载; 德文版本 EN 3057:1994 | Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel; dimensions and loads; German version EN 3056:1994 |
| DIN EN 3057-1994 | 航空航天系列轴承.机体用轴承.镀镉钢刚性双列滚珠轴承.尺寸和负载; 德文版本 EN 3057:1994 | Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel, cadmium plated; dimensions and loads; German version EN 3057:1994 |
| DIN EN 3058-1994 | 航空航天系列轴承.机体用轴承.耐腐蚀钢刚性双列滚珠轴承.尺寸和负载; 德文版本 EN 3058:1994 | Aerospace series; bearings, airframe rolling; rigid double row ball bearings in corrosion resisting steel; dimensions and loads; German version EN 3058:1994 |
| DIN EN 3063-1994 | 航空航天系列.耐高温镍基合金 NI-P101HT(沃斯帕洛尹合金) 中长螺纹十二角紧公差螺栓.等级:1210MPa (室温) | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3063:1994 |
| DIN EN 3064-1996 | 航空航天系列.锯齿形自锁铆接螺母.安装程序 | Aerospace series - Shank nuts, self-locking, serrated - Installation procedure; German version EN 3064:1996 |
| DIN EN 3065-1996 | 航空航天系列.自锁啮合铆接螺母安装孔.设计标准 | Aerospace series - Installation holes for self-locking, serrated shank nuts; design Standard; German version EN 3065:1996 |
| DIN EN 3079-2007 | 航空航天系列.8°30'压力28000 kPa的管道联接器.适配器.米制系列.技术规范 | Aerospace series - Pipe coupling 8°30' up to 28000 kPa - Adaptors - Metric series - Technical specification; German and English version EN 3079:2006 |
| DIN EN 3080-2007 | 航空航天系列.钛合金8°30'管接头.带有推力线螺母的缩短三通 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut; German and English version EN 3080:2006 |
| DIN EN 3081-2002 | 航空航天系列.钛合金管连接件 8°30'.带动态光束密封端头的修理用焊接箍; 德文版本 EN 3081:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair; German version EN 3081:2001 |
| DIN EN 3082-2004 | 航空航天系列.钛合金管连接件8°30'.修理用闷头焊接活接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead welded end, for repair; German and English version EN 3082:2001 + AC:2003 |
| DIN EN 3083-2004 | 航空航天系列.钛合金管连接件8°30'.修理用闷头长焊接端头活接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long welded end, for repair; German and English version EN 3083:2001 + AC:2003 |
| DIN EN 3084-2004 | 航空航天系列.钛合金管连接件8°30'.修理用焊接端头螺纹活接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, welded end threaded for repair; German and English version EN 3084:2001 + AC:2003 |
| DIN EN 3112-1995 | 航空航天系列.镀隔合金钢全螺纹公称六角头螺拴.等级:900MPa(室温下)/235℃; 德文版本 EN 3112:1995 | Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 3112:1995 |
| DIN EN 3114-001-2007 | 航空航天系列.试验方法.(α+ β)钛合金锻件微结构.第001部分:一般要求 | Aerospace series - Test method - Microstructure of ( + ?) titanium alloy wrought products - Part 001: General requirements; German and English version EN 3114-001:2006 |
| DIN EN 3114-002-2007 | 航空航天系列.试验方法.(α+β)钛合金锻造制品的微观结构.第002部分:棒材、型材、锻坯和锻件的微观结构 | Aerospace series - Test method - Microstructure of ( + ) titanium alloy wrought products - Part 002: Microstructure of bars, sections, forging stock and forgings; German and English version EN 3114-002:2007 |
| DIN EN 3114-003-2007 | 航空航天系列.试验方法.(α+ β)钛合金锻件微结构.第003部分:厚板材微型结构 | Aerospace series - Test method - Microstructure of ( + ?) titanium alloy wrought products - Part 003: Microstructure of plate; German and English version EN 3114-003:2006 |
| DIN EN 3114-004-2007 | 航空航天系列.试验方法.(α+ β)钛合金锻件微结构.第004部分:超塑性材料合成薄板的微型结构 | Aerospace series - Test method - Microstructure of ( + ?) titanium alloy wrought products - Part 004: Microstructure of sheet for superplastic forming; German and English version EN 3114-004:2006 |
| DIN EN 3135-1996 | 航空航天系列.耐蚀钢FE-PA11钝化带通用头的全铆钉.英制系列 | Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series; German version EN 3135:1996 |
| DIN EN 3136-1996 | 航空航天系列.耐蚀钢FE-PA92HT钝化带通用头的全铆钉.英制系列 | Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series; German version EN 3136:1996 |
| DIN EN 3138-2001 | 航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度沉头标称凸头实心铆钉; 德文版本 EN 3138:2001 | Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series; German version EN 3138:2001 |
| DIN EN 3139-2001 | 航空航天系列.耐腐蚀钢FE-PA11制钝化英制100度标称沉头实心铆钉; 德文版本 EN 3139:2001 | Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series; German version EN 3139:2001 |
| DIN EN 3140-2001 | 航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度标称沉头实心铆钉; 德文版本 EN 3140:2001 | Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series; German version EN 3140:2001 |
| DIN EN 3141-1996 | 航空航天系列.耐高温镍基合金钢NI-P11镀镉带通用头的全铆钉.英制系列 | Aerospace series - Rivets, solid, universal head, in head resisting nickel base alloy NI-P11, cadmium plated, inch based series; German version EN 3141:1996 |
| DIN EN 3142-1996 | 航空航天系列.耐高温镍基合金钢NI-P11带通用头的全铆钉.英制系列 | Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series; German version EN 3142:1996 |
| DIN EN 3145-2003 | 航空航天系列.热轧圆钢棒.标称公差.直径6mm ≤ D ≤ 250mm.尺寸 | Aerospace series - Round bars, hot rolled in steel - Normal tolerances; Diameter 6 mm D 250 mm; Dimensions; German and English version EN 3145:2001 |
| DIN EN 3146-2003 | 航空航天系列.紧公差、直径6mm D 250mm的热轧钢圆棒材.尺寸 | Aerospace series - Round bars, hot rolled, in steel, close tolerances, diameter 6 mmD250 mm - Dimensions; German and English version EN 3146:2001 |
| DIN EN 3149-1996 | 航空航天系列.铆接螺母.60度扩径安装孔法兰.设计标准 | Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard; German version EN 3149:1996 |
| DIN EN 3150-1995 | 航空航天系列.耐高温镍基合金NI-P100HI(因康718)无头台肩销; 德文版本 EN 3150:1995 | Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718); German version EN 3150:1995 |
| DIN EN 3151-1995 | 航空航天系列.耐高温镍基合金NI-P100HI(因康718)普通定位销; 德文版本 EN 3151:1995 | Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718); German version EN 3151:1995 |
| DIN EN 3152-2005 | 航空航天系列.镀银或未涂覆的耐热钢FE-PA2601 (A286)制MJ螺纹自锁紧螺母.等级:1100 MPa(室温)/425 鳦.技术 | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated - Classification: 1100 MPa (at ambient temperature)/425 °C - Technical specification; German and English version EN 3152:2004 |
| DIN EN 3155-002-2007 | 航空航天系列.用于连接部件的电触点.第002部分:触点列表和应用 | Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts; German and English version EN 3155-002:2006 |
| DIN EN 3155-003-2006 | 航空航天系列.连接部件中用电连接器.第003部分: S级、压紧、A型电连接器插座.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-003:2005 |
| DIN EN 3155-005 Berichtigung 1-2007 | 航空航天系列.连接部件中用电连接器.第005部分:T级、压紧、A型电连接器插座.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard; German and English version EN 3155-005:2006, Corrigenda to DIN EN 3155-005:2006-10; German and English version EN 3155-005:2006/AC:2006 |
| DIN EN 3155-005-2006 | 航空航天系列.连接部件中用电连接器.第005部分:T级、压紧、A型电连接器插座.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard; German and English version EN 3155-005:2006 |
| DIN EN 3155-008-2006 | 航空航天系列.连接部件中用电连接器.第008部分: S级、A型、压紧、电连接器插头.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-008:2005 |
| DIN EN 3155-009-2007 | 航空航天系列.用于连接部件的电触点.第009部分:S级、卷边、A型、阴性电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-009:2006 |
| DIN EN 3155-012-2007 | 航空航天系列.用于连接部件的电触点.第012部分:R级、焊接、D型、凸形、尺寸8、三轴电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 012: Contacts, electrical, triaxial, size 8, male, type D, solder, class R - Product standard; German and English version EN 3155-012:2006 |
| DIN EN 3155-013-2007 | 航空航天系列.用于连接部件的电触点.第013部分:R级、焊接、D型、凹形、尺寸8、三轴电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R - Product standard; German and English version EN 3155-013:2006 |
| DIN EN 3155-014-2007 | 航空航天系列.用于连接部件的电触点.第014部分:S级、卷边、A型、凸形电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 014: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-014:2006 |
| DIN EN 3155-015-2007 | 航空航天系列.用于连接部件的电触点.第015部分:S级、卷曲、A型、凹形电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-015:2006 |
| DIN EN 3155-016-2007 | 航空航天系列.用于连接部件的电触点.第016部分:S级、卷边、A型、凸形电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-016:2006 |
| DIN EN 3155-017-2007 | 航空航天系列.用于连接部件的电触点.第017部分:P级、卷边、A型、凹形、继电器底部电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard; German and English version EN 3155-017:2006 |
| DIN EN 3155-018-2006 | 航空航天系列.连接部件中用电连接器.第018部分: S级、压紧、A型电连接器插头.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 018: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-018:2005 |
| DIN EN 3155-019-2006 | 航空航天系列.连接部件中用电连接器.第019部分: S级、压紧、A型电连接器插座.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-019:2005 |
| DIN EN 3155-022-2007 | 航空航天系列.用于连接部件的电触点.第022部分:R级、卷边、A型、凸形、矩形电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 022: Contacts, electrical rectangular, male, type A, crimp, class R - Product standard; German and English version EN 3155-022:2006 |
| DIN EN 3155-023-2006 | 航空航天系列.连接部件中用电连接器.第023部分: R级、压紧、A型电连接器矩形插座.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 023: Contacts, electrical rectangular, female, type A, crimp, class R - Product standard; German and English version EN 3155-023:2006 |
| DIN EN 3155-024-2007 | 航空航天系列.用于连接部件的电触点.第024部分:S级、卷边、D型、凸形、尺寸8、三轴电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S - Product standard; German and English version EN 3155-024:2006 |
| DIN EN 3155-025-2007 | 航空航天系列.用于连接部件的电触点.第025部分:S级、卷边、D型、凹形、尺寸8、三轴电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S - Product standard; German and English version EN 3155-025:2006 |
| DIN EN 3155-026-2006 | 航空航天系列.连接部件中用电连接器.第026部分: R级、压紧、A型电连接器插头.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product standard; German and English version EN 3155-026:2006 |
| DIN EN 3155-027-2006 | 航空航天系列.连接部件中用电连接器.第027部分: R级、压紧、A型电连接器插座.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product standard; German and English version EN 3155-027:2006 |
| DIN EN 3155-028-2007 | 航空航天系列.连接部件用电气插头.第028部分:R级、压接、D型、尺寸16、屏蔽的同轴插头电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 028: Contacts, electrical, coaxial, shielded, size 16, male, type D, crimp, class R - Product standard; German and English version EN 3155-028:2006 |
| DIN EN 3155-030-2007 | 航空航天系列.用于连接部件的电触点.第030部分:R级、卷边、D型、凸形、尺寸12、屏蔽同轴电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 030: Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R - Product standard; German and English version EN 3155-030:2006 |
| DIN EN 3155-031-2007 | 航空航天系列.用于连接部件的电触点.第031部分:R级、卷边、D型、凹形、尺寸12、屏蔽同轴电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 031: Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R - Product standard; German and English version EN 3155-031:2006 |
| DIN EN 3155-042-2006 | 航空航天系列.连接部件中用电连接器.第042部分:P级、焊接、D型、042插头、尺寸08mm三轴电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 042: Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P - Product standard; German and English version EN 3155-042:2006 |
| DIN EN 3155-043-2006 | 航空航天系列.连接部件中用电连接器.第043部分:P级、焊接、D型、043插座、尺寸08mm三轴电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Product standard; German and English version EN 3155-043:2006 |
| DIN EN 3155-045-2007 | 航空航天系列.连接部件用电气插头.第045部分:T级、双压接、A型插座电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard; German and English version EN 3155-045:2006 |
| DIN EN 3155-054-2007 | 航空航天系列.连接元件用电连接器.第054部分:T级压接C型热电偶NiAl插头电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 054: Contacts, electrical, male, thermocouple NiAl, type C, crimp, class T - Product standard; German and English version EN 3155-054:2006 |
| DIN EN 3155-055-2007 | 航空航天系列.连接元件用电连接器.第055部分:T级压接C型热电偶NiAl插孔电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 055: Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T - Product standard; German and English version EN 3155-055:2006 |
| DIN EN 3155-056-2007 | 航空航天系列.连接元件用电连接器.第056部分:T级压接C类热电偶NiCr插头电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 056: Contacts, electrical, male, thermocouple NiCr, type C, crimp, class T - Product standard; German and English version EN 3155-056:2006 |
| DIN EN 3155-057-2007 | 航空航天系列.连接元件用电连接器.第057部分:T级压接C型热电偶NiCr插孔电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 057: Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T - Product standard; German and English version EN 3155-057:2006 |
| DIN EN 3155-058-2007 | 航空航天系列.连接元件用电连接器.第058部分:尺寸为16、R级焊接D类同轴插头电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R - Product standard; German and English version EN 3155-058:2006 |
| DIN EN 3155-059-2007 | 航空航天系列.连接元件用电连接器.第059部分:尺寸为16、R级焊接D类同轴插孔电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard; German and English version EN 3155-059:2006 |
| DIN EN 3155-060-2007 | 航空航天系列.连接元件用电连接器.第060部分:尺寸为12、R级焊接D类同轴插头电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 060: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard; German and English version EN 3155-060:2006 |
| DIN EN 3155-061-2007 | 航空航天系列.连接元件用电连接器.第061部分:尺寸为12、R级焊接D类同轴电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 061: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard; German and English version EN 3155-061:2006 |
| DIN EN 3155-065-2007 | 航空航天系列.连接元件用电连接器.第065部分:尺寸为8、S级压接A型插头电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard; German and English version EN 3155-065:2006 |
| DIN EN 3155-066-2007 | 航空航天系列.连接元件用电连接器.第066部分:尺寸为8、S级压接A类插孔电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 066: Contacts, electrical, female, type A, crimp, class S, size 8 - Product standard; German and English version EN 3155-066:2006 |
| DIN EN 3160-2007 | 航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气冶炼的溶解处理和沉淀处理的棒材.a或D≤200mm、R<指数m>≤1 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D 200 mm, R<(Index)m> 1310 MPa; German and English version EN 3160:2007 |
| DIN EN 3161-2007 | 航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气熔炼、溶解处理和沉淀处理.棒材.a或D≤200mm.R<(指数)m>≥9 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D 200 mm, R<(Index)m> 930 MPa; German and English version EN 3161:2007 |
| DIN EN 3162-2007 | 航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气熔炼、溶解处理和沉淀处理.薄板材和带材.a≤6mm.R<(指数)m> | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, sheet and strip a 6 mm, R<(Index)m> 930 MPa; German and English version EN 3162:2007 |
| DIN EN 3163-2007 | 航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气冶炼的软化锻坯.a或D≤300mm | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, softened, forging stock a or D 300 mm; German and English version EN 3163:2007 |
| DIN EN 3196-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 镀银自锁六角头螺母.等级:1100 MPa (室温)摄氏 425 度; 德文版本 E | Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3196:1994 |
| DIN EN 3202-1996 | 航空航天系列.T形头螺栓放油孔和集油器.设计标准 | Aerospace series - Holes and traps for T-head bolts - Design standard; German version EN 3202:1995 |
| DIN EN 3207-1998 | 航空航天系列.橡胶化合物.技术规范 | Aerospace series - Rubber compounds - Technical specification; German version EN 3207:1998 |
| DIN EN 3212-1995 | 航空航天系列.颜料和清漆.在阻尼的氯化纳溶剂中用交替浸渍试验法测定耐蚀性; 德文版本 EN 3212:1995 | Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution; German version EN 3212:1995 |
| DIN EN 3218-001-2006 | 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第001部分:技术规范 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 001: Technical specification; German and English version EN 3218-001:2006 |
| DIN EN 3218-002-2006 | 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第002部分:性能和接触方式规范 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements; German and English version EN 3218-002:2006 |
| DIN EN 3218-005-2006 | 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第005部分:不可拆卸的尺寸为22的焊式接触件插头.产品标准 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 005: Plug with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-005:2006 |
| DIN EN 3218-006-2006 | 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第006部分:不可拆卸的尺寸为22的焊式接触件插座.产品标准 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-006:2006 |
| DIN EN 3218-007-2006 | 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第007部分:后部抽取式尺寸为20的卷曲触点插头.产品标准 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 007: Plug with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-007:2006 |
| DIN EN 3218-008-2006 | 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第008部分:后部抽取式尺寸为20的卷曲触点插座.产品标准 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 008: Receptacle with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-008:2006 |
| DIN EN 3218-009-2006 | 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第009部分:EN 3218-005和EN 3218-007连接器的防护罩.产品标准 | Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors - Product standard; German and English version EN 3218-009:2006 |
| DIN EN 3218-010-2006 | 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第010部分:EN 3218-006和EN 3218-008连接器的防护罩.产品标准 | Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard; German and English version EN 3218-010:2006 |
| DIN EN 3218-011-2006 | 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第011部分:EN EN 3218-005至EN 3218-008连接器的插入萃取工具. | Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors - Product standard; German and English version EN 3218-011:2006 |
| DIN EN 3230-2001 | 航空航天系列.钢制镀镉标称对边高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/235℃; 德文版本 EN 3230 | Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 3230:2001 |
| DIN EN 3236-1998 | 航空航天系列.NI-P100HT(因康718)耐热镍基合金制薄壁自锁短镶嵌件.镀银内螺纹 | Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Silver plated internal thread; German version EN 3236:1998 |
| DIN EN 3237-1998 | 航空航天系列.NI-P100HT(因康718)耐热镍基合金制薄壁自锁长镶嵌件.镀银内螺纹 | Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100 HT (Inconel 718) - Silver plated internal thread; German version EN 3237:1998 |
| DIN EN 3239-1995 | 航空航天系列.镀银螺纹耐高温镍基合金NI-P101HT(沃斯帕洛尹合金)自锁十二角螺母.等级:1210MPa(室温)/730℃; | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/650 °C; German version EN 3239:1995 |
| DIN EN 3243-2002 | 航空航天系列.钛合金8°30'管连接件.带动态束密封端的金属圈焊接; 德文版本 EN 3243:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrule welded, with dynamic beam seal end; German version EN 3243:2001 |
| DIN EN 3244-2002 | 航空航天系列.钛合金8°30'管连接件.双端管接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, double ended; German version EN 3244:2001 |
| DIN EN 3245-2002 | 航空航天系列.钛合金8°30'管连接件.异径管接头; 德文版本 EN 3245:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, reducer; German version EN 3245:2001 |
| DIN EN 3246-2002 | 航空航天系列.钛合金8°30'管连接件.闷头管接头; 德文版本 EN 3246:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead; German version EN 3246:2001 |
| DIN EN 3247-2002 | 航空航天系列.钛合金8°30'管连接件.焊接端的闷头管接头; 德文版本 EN 3247:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, welded end; German version EN 3247:2001 |
| DIN EN 3248-2003 | 航空航天系列.钛合金管联接器8°30’.带锁紧环的缩径管端头转接器 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Adapters, reduced pipe end, with locking ring; German and English version EN 3248:2001 |
| DIN EN 3264-2002 | 航空航天系列.钛合金8°30'管连接件.推力金属丝螺母; 德文版本 EN 3264:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Thrust wire nuts; German version EN 3264:2001 |
| DIN EN 3266-2002 | 航空航天系列.钛合金管连接件.闷头螺母; 德文版本 EN 3266:2001 | Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut; German version EN 3266:2001 |
| DIN EN 3267-2002 | 航空航天系列.钛合金闷头垫圈; 德文版本 EN 3267:2001 | Aerospace series - Washers, bulkhead, in titanium alloy; German version EN 3267:2001 |
| DIN EN 3268-2002 | 航空航天系列.钛合金8°30'管连接件.压力插头; 德文版本 EN 3268:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Pressure plug; German version EN 3268:2001 |
| DIN EN 3269-2006 | 航空航天系列.8°30'钛合金管接头.带动态梁密封端的单头卡套.德文和英文版本EN 3269-2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules, blind, with dynamic beam seal end; German and English version EN 3269:2001 |
| DIN EN 3270-2004 | 航空航天系列.8°30'钛合金管连接件.带锁紧环的堵塞 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Blanking plugs with lockring; German and English version EN 3270:2001 + AC:2003 |
| DIN EN 3272-2006 | 航空航天系列.8°30'管接头.焊接箍用动态梁密封端.几何构型.德文和英文版本EN 3272-2001 | Aerospace series - Pipe coupling 8°30' - Dynamic beam seal end for ferrule, welded - Geometric configuration; German and English version EN 3272:2001 |
| DIN EN 3273-2006 | 航空航天系列.钛合金管连接件8°30'.弯头、十字管和三通管用动梁密封端头.几何配置 | Aerospace series - Pipe coupling 8°30′ - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration; German and English version EN 3273:2001 |
| DIN EN 3274-2002 | 航空航天系列.8°30'管连接件.螺纹.几何配置; 德文版本 EN 3274:2001 | Aerospace series - Pipe coupling 8°30 - Threaded; Geometric configuration; German version EN 3274:2001 |
| DIN EN 3275-2002 | 航空航天系列.可达28000kPa 的 8°30'管连接件.动态光束密封.公制系列.技术规范; 德文和英文版本 EN 3275:2 | Aerospace series - Pipe coupling 8°30 up to 28000 kPa - Dynamic beam seal; Metric series; Technical specification; German and English version EN 3275:2002 |
| DIN EN 3280-1994 | 航空航天系列.刚性或自定心机体用轴承.技术规范; 德文版本 EN 3280:1994 | Aerospace series; bearings, airframe rolling, rigid or self-aligning; technical specification; German version EN 3280:1994 |
| DIN EN 3281-1994 | 航空航天系列.机体用轴承.钢制刚性单列滚珠轴承.直径系列 8 和 直径系列 9.尺寸和负载; 德文版本 EN 3281:1 | Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9; dimensions and loads; German version EN 3281:1994 |
| DIN EN 3282-1994 | 航空航天系列.机体用轴承.镀镉钢刚性单列滚珠轴承.直径系列 8 和 直径系列 9.尺寸和负载; 德文版本 EN 3282 | Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9; dimensions and loads; German version EN 3282:1994 |
| DIN EN 3283-1994 | 航空航天系列.飞机用滚动轴承.不锈钢单列滚珠轴承.直径系列 8 和 直径系列 9.尺寸和负载; 德文版本 EN 3283 | Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9; dimensions and loads; German version EN 3283:1994 |
| DIN EN 3284-1994 | 航空航天系列.机体用轴承.钢制单列自定心滚珠轴承.直径系列 0 和 直径系列 2.公称公差范畴.尺寸和负载; 德 | Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3284:1994 |
| DIN EN 3285-1994 | 航空航天系列.机体用轴承.镀镉钢刚性单列滚珠轴承.直径系列 0 和直径系列 2.公称公差范畴.尺寸和负载; 德文 | Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3285:1994 |
| DIN EN 3286-1994 | 航空航天系列.机体用轴承.不锈钢刚性单列滚珠轴承.直径系列 0 和直径系列 2.公称公差范畴.尺寸和负载; 德文 | Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3286:1994 |
| DIN EN 3287-1994 | 航空航天系列.机体用轴承.钢制双列自定心滚珠轴承.直径系列 2.尺寸和负载; 德文版本 EN 3287:1994 | Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2; dimensions and load; German version EN 3287:1994 |
| DIN EN 3288-1994 | 航空航天系列.机体用轴承.镀镉钢双列自定心滚珠轴承.直径系列 2.尺寸和负载; 德文版本 EN 3288:1994 | Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2; dimensions and loads; German version EN 3288:1994 |
| DIN EN 3289-1994 | 航空航天系列.机体用轴承.不锈钢双列自定心滚珠轴承.直径系列 0.尺寸和负载; 德文版本 EN 3289:1994 | Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads; German version EN 3289:1994 |
| DIN EN 3290-1994 | 航空航天系列.机体用轴承.钢制单列自定心滚柱轴承.直径系列 3 和 直径系列 4.尺寸和负载; 德文版本 EN 3290 | Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4; dimensions and loads; German version EN 3290:1994 |
| DIN EN 3291-1994 | 航空航天系列.机体用轴承.镀铬钢单列自定心滚柱轴承.直径系列 3 和 直径系列 4.尺寸和负载; 德文版本 EN 32 | Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4; dimensions and loads; German version EN 3291:1994 |
| DIN EN 3292-1994 | 航空航天系列.机体用轴承.不锈钢单列自定心滚柱轴承.直径系列 3 和 直径系列 4.尺寸和负载; 德文版本 EN 32 | Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads; German version EN 3292:1994 |
| DIN EN 3297-1998 | 航空航天系列.NI-P100HT(因康718)耐热镍基合金制MJ螺纹的薄壁自锁镶嵌件.技术规范 | Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification; German version EN 3297:1998 |
| DIN EN 3298-1998 | 航空航天系列.薄壁自锁镶嵌件.安装和拆卸程序 | Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure; German version EN 3298:1998 |
| DIN EN 3303-1997 | 航空航天系列.镀镉合金钢中等螺纹长度内六角圆柱形螺钉.等级:1100MPa(室温)/235℃ | Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3303:1997 |
| DIN EN 3304-1996 | 航空航天系列.钛合金阳极处理MoS<2>锻造短螺纹带翼型十字槽带小头100度沉头配合螺钉.等级:1100MPa(室温)/31 | Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3304:1996 |
| DIN EN 3305-1996 | 航空航天系列.合金钢镀镉短螺纹带翼型十字槽带小头100度沉头配合螺钉.等级:1100MPa(室温)/235℃ | Aerospace series - Screws, 100° countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3305:1996 |
| DIN EN 3306-1996 | 航空航天系列.钛合金阳极化MoS2润滑短螺纹接近顶点带翼形十字槽的100度沉头螺丝.等级: 1100MPa/315℃ | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3306:1996 |
| DIN EN 3307-1996 | 航空航天系列.钛合金阳极处理MoS<2>锻造螺纹接近根部带翼型十字槽平头螺钉.等级:1100MPa(室温)/315℃ | Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3307:1996 |
| DIN EN 3308-1996 | 航空航天系列.钛合金阳极化MoS2润滑螺纹接近顶点的六角螺丝.等级:1100MPa/315℃ | Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3308:1996 |
| DIN EN 3332-2006 | 航空航天系列.铝合金AL-P7475-T762.覆层板材及带材.1.0mm≥a ≥6mm | Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 3332:2005 |
| DIN EN 3335-2006 | 航空航天系列.铝合金AL.P7475-O2.超塑成形薄板材(SPF).0.8mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm; German and English version EN 3335:2005 |
| DIN EN 3338-2006 | 航空航天系列.铝合金AL-P7050-T74511.挤压棒材和型材.a或D<=150mm周边晶粒控制 | Aerospace series - Aluminium alloy AL-P7050-T74511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3338:2005 |
| DIN EN 3339-2007 | 航天航空系列.AL-P7010-T76型铝合金.模锻件.a≤200mm | Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a 200 mm; German and English version EN 3339:2006 |
| DIN EN 3341-2006 | 航空航天系列.铝合金AL-P6061-T4或T42.薄板材和带材.0.4mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 3341:2005 |
| DIN EN 3342-2006 | 航空航天系列.铝合金AL-P6061-T4或T42.挤压棒材和型材.a或D<=150mm | Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D 150 mm; German and English version EN 3342:2005 |
| DIN EN 3344-2006 | 航空航天系列.铝合金AL-P7050-T76511.挤压棒和型材.a或D<= 150 mm周边粗粒控制 | Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3344:2005 |
| DIN EN 3347-2006 | 航空航天系列.铝合金AL-P2024-T8511.挤压棒材和型材.a/D≤150mm周边粗粒控制 | Aerospace series - Aluminium alloy AL-P2024-T8511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3347:2005 |
| DIN EN 3359-2007 | 航空航天系列.FE-PM1503(X3CrNiMoAl13-8-2)型钢.真空感应熔化和自耗电极重熔的软化锻坯.a或D≤300mm | Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D 300 mm; German and English version EN 3359:2007 |
| DIN EN 3361-2007 | 航空航天系列.FE-PM1802(X5CrNiCu15-5)型钢.自耗电极重熔的溶解处理和沉淀处理的薄板材和带材.a≤6mm.1070M | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a 6 mm, 1070 MPa R<(Index)m> 1220 MPa; German and English version EN 3361:2007 |
| DIN EN 3364-2007 | 航空航天运输.FE-PM1802(X5CrNiCu15-5)型钢.自耗电极重熔的软化锻坯.a或D≤300mm | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, softened, forging stock a or D 300 mm; German and English version EN 3364:2007 |
| DIN EN 3365-2007 | 航空航天系列.FE-PM3901(X15CrNi17-3)型钢.空气冶炼的软化锻坯.a或D≤300mm | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted, softened, forging stock a or D 300 mm; German and English version EN 3365:2007 |
| DIN EN 3373-012-2007 | 航空航天系列.电导体压接用终端盒和内嵌连接线.第012部分:温度＜150℃的铜导体压接用绝缘和密封的内嵌连接 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 °C - Product standard; German and English version EN 3373-012:2005 |
| DIN EN 3373-013-2007 | 航空航天系列.电导体压接用终端盒和内嵌连接线.第013部分:温度＜260℃的铜导体压接用绝缘和抗湿的内嵌连接 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260°C - Product standard; German and English version EN 3373-013:2005 |
| DIN EN 3377-1996 | 航空航天系列.高温钢FE-PA92HT(A286)自锁六角螺母.等级:1100 MPa(室温下)/425℃ | Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3377:1996 |
| DIN EN 3379-1996 | 航空航天系列.高温镍基合金NI-P101HT(沃斯帕落伊合金)厚螺母用中螺纹十二角配合螺栓.等级:1210 MPa(室温)/7 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3379:1996 |
| DIN EN 3380-1996 | 航空航天系列.安全环.交货技术条件 | Aerospace series - Rings, retaining - Technical specification; German version EN 3380:1996 |
| DIN EN 3381-1996 | 航空航天系列.钛阳极处理MoS<2>锻造短螺纹带翼型十字槽100度沉头配合螺钉.等级:1100MPa(室温)/315℃ | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3381:1996 |
| DIN EN 3425-2007 | 航空航天系列.轴安装内部固定环用槽尺寸 | Aerospace series - Groove dimensions for axial mounting internal type retaining rings; German and English version EN 3425:2006 |
| DIN EN 3426-2007 | 航空航天系列.轴安装外形固定环用槽尺寸 | Aerospace series - Groove dimensions for axial mounting external type retaining rings; German and English version EN 3426:2006 |
| DIN EN 3427-2007 | 航空航天系列.径向安装固定环的沟槽尺寸 | Aerospace series - Groove dimensions for radial mounting retaining rings; German and English version EN 3427:2006 |
| DIN EN 3444-2007 | 航空航天系列.钝化处理的耐热镍基合金中长度螺纹紧公差标准螺杆的大双六角头螺栓.等级:1250MPa(室温)/650℃ | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature)/650 °C; German and English version EN 3444:2006 |
| DIN EN 3446-1995 | 航空航天系列.仪器和设备用耐蚀钢无法兰的精密滚珠轴承.尺寸和负载; 德文版本 EN 3446:1995 | Aerospace series - Bearings, precision ball, without flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 3446:1995 |
| DIN EN 3474-2006 | 航空航天系列.铝合金AL-P2024-T81.薄板材和带材.0.25mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm a 6 mm; German and English version EN 3474:2005 |
| DIN EN 3475-100-2002 | 航空航天系列.航空用电缆.试验方法.第100部分:总则; 德文版本 EN 3475-100:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General; German version EN 3475-100:2002 |
| DIN EN 3475-201-2002 | 航空航天系列.航空用电缆.试验方法.第201部分:目测检验; 德文版本 EN 3475-201:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination; German version EN 3475-201:2002 |
| DIN EN 3475-202-2002 | 航空航天系列.航空用电缆.试验方法.第202部分:质量; 德文版本 EN 3475-202:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass; German version EN 3475-202:2002 |
| DIN EN 3475-203-2006 | 航空航天系列.飞机电缆.试验方法.第203部分:尺寸 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions; German and English version EN 3475-203:2006 |
| DIN EN 3475-301-2002 | 航空航天系列.航空用电缆.试验方法.第301部分:单位长度电阻; 德文版本 EN 3475-301:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Electrical resistance per unit length; German version EN 3475-301:2002 |
| DIN EN 3475-302-2007 | 航空航天系列.飞行器用电缆.试验方法.第302部分:电压保护试验 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test; German and English version EN 3475-302:2006 |
| DIN EN 3475-303-2002 | 航空航天系列.航空用电缆.试验方法.第303部分:绝缘电阻; 德文版本 EN 3475-303:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance; German version EN 3475-303:2002 |
| DIN EN 3475-304-2002 | 航空航天系列.航空用电缆.试验方法.第304部分:表面电阻; 德文版本 EN 3475-304:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance; German version EN 3475-304:2002 |
| DIN EN 3475-305-2002 | 航空航天系列.航空用电缆.试验方法.第305部分:过载电阻; 德文版本 EN 3475-305:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance; German version EN 3475-305:2002 |
| DIN EN 3475-306-2007 | 航空航天系列.飞行器用电缆.试验方法.第306部分:导线连续性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors; German and English version EN 3475-306:2005 |
| DIN EN 3475-307-2006 | 航空航天系列.飞行器用电缆.试验方法.第307部分:电晕熄灭电压 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage; German and English version EN 3475-307:2005 |
| DIN EN 3475-401-2002 | 航空航天系列.航空用电缆.试验方法.第401部分:加速老化; 德文版本 EN 3475-401:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing; German version EN 3475-401:2002 |
| DIN EN 3475-402-2002 | 航空航天系列.航空用电缆.试验方法.第402部分:收缩和脱层; 德文版本 EN 3475-402:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination; German version EN 3475-402:2002 |
| DIN EN 3475-403-2002 | 航空航天系列.航空用电缆.试验方法.第403部分:脱层和阻塞; 德文版本 EN 3475-403:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking; German version EN 3475-403:2002 |
| DIN EN 3475-404-2002 | 航空航天系列.航空用电缆.试验方法.第404部分:热冲击; 德文版本 EN 3475-404:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock; German version EN 3475-404:2002 |
| DIN EN 3475-405-2002 | 航空航天系列.航空用电缆.试验方法.第405部分:环境温度下的弯曲度; 德文版本 EN 3475-405:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature; German version EN 3475-405:2002 |
| DIN EN 3475-406-2002 | 航空航天系列.航空用电缆.试验方法.第406部分:冷弯曲试验; 德文版本 EN 3475-406:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test; German version EN 3475-406:2002 |
| DIN EN 3475-407-2006 | 航空航天系列.航空用电缆.试验方法.第407部分:易燃性 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 407: Flammability; German and English version EN 3475-407:2005 |
| DIN EN 3475-409-2002 | 航空航天系列.航空用电缆.试验方法.第409部分:真空老化; 德文版本 EN 3475-409:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing; German version EN 3475-409:2002 |
| DIN EN 3475-410-2002 | 航空航天系列.航空用电缆.试验方法.第410部分:耐热; 德文版本 EN 3475-410:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance; German version EN 3475-410:2002 |
| DIN EN 3475-411-2007 | 航空航天系列.飞行器用电缆.试验方法.第411部分:耐液体性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids; German and English version EN 3475-411:2005 |
| DIN EN 3475-412-2002 | 航空航天系列.航空用电缆.试验方法.第412部分:耐湿试验; 德文和英文版本 EN 3475-412:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance; German and English version EN 3475-412:2002 |
| DIN EN 3475-413-2002 | 航空航天系列.航空用电缆.试验方法.第413部分:反向缠绕试验; 德文和英文版本 EN 3475-413:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test; German and English version EN 3475-413:2002 |
| DIN EN 3475-414-2007 | 航空航天系列.飞行器用电缆.试验方法.第414部分:差分扫描量热计 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test); German and English version EN 3475-414:2005 |
| DIN EN 3475-415-2007 | 航空航天系列.飞行器用电缆.试验方法.第415部分:温度骤变 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature; German and English version EN 3475-415:2005 |
| DIN EN 3475-416-2007 | 航空航天系列.飞行器用电缆.试验方法.第416部分:热稳定性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability; German and English version EN 3475-416:2005 |
| DIN EN 3475-501-2002 | 航空航天系列.航空用电缆.试验方法.第501部分:动态切开; 德文版本 EN 3475-501:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 501: Dynamic cut-through; German version EN 3475-501:2002 |
| DIN EN 3475-502-2002 | 航空航天系列.航空用电缆.试验方法.第502部分:切口延伸; 德文版本 EN 3475-502:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation; German version EN 3475-502:2002 |
| DIN EN 3475-503-2002 | 航空航天系列.航空用电缆.试验方法.第503部分:擦伤磨蚀; 德文版本 EN 3475-503:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion; German version EN 3475-503:2002 |
| DIN EN 3475-504-2002 | 航空航天系列.航空用电缆.试验方法.第504部分:扭转; 德文版本 EN 3475-504:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion; German version EN 3475-504:2002 |
| DIN EN 3475-505-2002 | 航空航天系列.航空用电缆.试验方法.第505部分:对导体和绞合线进行的抗拉试验; 德文版本 EN 3475-505:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 505: Tensile test on conductors and strands; German version EN 3475-505:2002 |
| DIN EN 3475-506-2002 | 航空航天系列.航空用电缆.试验方法.第506部分:电镀的均匀性; 德文版本 EN 3475-506:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 506: Plating continuits; German version EN 3475-506:2002 |
| DIN EN 3475-507-2002 | 航空航天系列.航空用电缆.试验方法.第507部分:镀层的粘合性; 德文版本 EN 3475-507:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 507: Adherence of plating; German version EN 3475-507:2002 |
| DIN EN 3475-508-2002 | 航空航天系列.航空用电缆.试验方法.第508部分:镀层厚度; 德文和英文版本 EN 3475-508:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness; German and English version EN 3475-508:2002 |
| DIN EN 3475-509-2002 | 航空航天系列.航空用电缆.试验方法.第509部分:可焊性; 德文和英文版本 EN 3475-509:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability; German and English version EN 3475-509:2002 |
| DIN EN 3475-510-2002 | 航空航天系列.航空用电缆.试验方法.第510部分:挤压绝缘护套和包装材料的抗拉强度和延伸率; 德文和英文版本 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material; German and English version EN 3475-510:2002 |
| DIN EN 3475-511-2002 | 航空航天系列.飞机电缆.试验方法.第511部分:电缆间磨损 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion; German and English version EN 3475-511:2002 |
| DIN EN 3475-512-2002 | 航空航天系列.航空用电缆.试验方法.第512部分:耐弯曲; 德文和英文版本 EN 3475-512:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance; German and English version EN 3475-512:2002 |
| DIN EN 3475-513-2007 | 航空航天系列.飞行器用电缆.试验方法.第513部分:抗变形(塑料电缆结配置) | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties); German and English version EN 3475-513:2005 |
| DIN EN 3475-603-2002 | 航空航天系列.航空用电缆.试验方法.第603部分:抗湿电弧老化漏电; 德文和英文版本 EN 3475-603:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 603: Resistance to wet arc tracking; German and English version EN 3475-603:2002 |
| DIN EN 3475-604-2002 | 航空航天系列.航空用电缆.试验方法.第604部分:抗干电弧传导; 德文和英文版本 EN 3475-604:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation; German and English version EN 3475-604:2002 |
| DIN EN 3475-605-2002 | 航空航天系列.航空用电缆.试验方法.第605部分:湿短路试验; 德文和英文版本 EN 3475-605:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test; German and English version EN 3475-605:2002 |
| DIN EN 3475-701-2002 | 航空航天系列.航空用电缆.试验方法.第701部分:导体绝缘的可剥离性和粘合性; 德文版本 EN 3475-701:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippabilitiy and adherence of insulation to the conductor; German version EN 3475-701:2002 |
| DIN EN 3475-702-2002 | 航空航天系列.航空用电缆.试验方法.第702部分:屏蔽捋出性能; 德文版本 EN 3475-702:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability; German version EN 3475-702:2002 |
| DIN EN 3475-703-2002 | 航空航天系列.航空用电缆.试验方法.第703部分:制造商标记的耐久性; 德文版本 EN 3475-703:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturer's marking; German version EN 3475-703:2002 |
| DIN EN 3475-704-2002 | 航空航天系列.飞机电缆.试验方法.第704部分:挠性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 704: Flexibility; German and English version EN 3475-704:2002 |
| DIN EN 3475-705-2006 | 航空航天系列.航空用电缆.试验方法.第705部分:对比测量 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement; German and English version EN 3475-705:2005 |
| DIN EN 3475-706-2006 | 航空航天系列.航空用电缆.试验方法.第706部分:激光可标记性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability; German and English version EN 3475-706:2005 |
| DIN EN 3475-801-2002 | 航空航天系列.航空用电缆.试验方法.第801部分:单位长度的电容量; 德文和英文版本 EN 3475-801:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length; German and English version EN 3475-801:2002 |
| DIN EN 3475-802-2002 | 航空航天系列.航空用电缆.试验方法.第802部分:电容量的不平衡性; 德文和英文版本 EN 3475-802:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2002 |
| DIN EN 3475-803-2002 | 航空航天系列.航空用电缆.试验方法.第803部分:电容量变化; 德文和英文版本 EN 3475-803:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation; German and English version EN 3475-803:2002 |
| DIN EN 3475-804-2002 | 航空航天系列.航空用电缆.试验方法.第804部分:传导速度; 德文和英文版本 EN 3475-804:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of propagation; German and English version EN 3475-804:2002 |
| DIN EN 3475-805-2002 | 航空航天系列.航空用电缆.试验方法.第805部分:特性阻抗; 德文和英文版本 EN 3475-805:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance; German and English version EN 3475-805:2002 |
| DIN EN 3475-806-2002 | 航空航天系列.航空用电缆.试验方法.第806部分:衰减; 德文和英文版本 EN 3475-806:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation; German and English version EN 3475-806:2002 |
| DIN EN 3475-807-2002 | 航空航天系列.航空用电缆.试验方法.第807部分:传输阻抗; 德文和英文版本 EN 3475-807:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance; German and English version EN 3475-807:2002 |
| DIN EN 3475-808-2002 | 航空航天系列.航空用电缆.试验方法.第808部分:串音; 德文和英文版本 EN 3475-808:2002 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk; German and English version EN 3475-808:2002 |
| DIN EN 3476-2007 | 航天航空系列.FE-PL1501(30CrMo12)型钢.空气熔炼.软化.锻坯件a或 D≤300mm | Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - a or D ≤ 300 mm; German and English version EN 3476:2006 |
| DIN EN 3479-2007 | 航空航天系列.FE-PM1802(X5CrNiCu15-5)型钢.自耗电极熔炼.溶解处理和沉淀处理.厚板材.6mm＜a≤20mm.1070MPa | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm a 20 mm - 1070 MPa R<(Index)m> 1220 MPa; German and English version EN 3479:2007 |
| DIN EN 3490-2007 | 航空航天系列.FE-PM3901(X15CrNi17-3)型钢.空气熔炼.淬火和回火.加工用棒材.De≤200mm.900MPa≤R<(指数)m> | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De 200 mm - 900 MPa R<(Index)m> 1100 MPa; German and English version EN 3490:2007 |
| DIN EN 3491-2007 | 航空航天系列.FE-PL1501 (30CrMo12)型钢.锻造.D≤100mm.930 MPa≤R≤1100 MPa | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - D ≤ 100 mm - 900 MPa ≤ R ≤ 1100 MPa; German and English version EN 3491:2006 |
| DIN EN 3506-2003 | 航空航天系列.热轧薄板材耐热合金板材.厚度2.0mm～100mm.尺寸 | Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm a 100 mm; Dimensions; German and English version EN 3506:2001 |
| DIN EN 3507-2007 | 航空航天系列.调质的钢 FE-PL1501(30CrMo12).锻造.D≤100mm.930MPa≤R≤1080MPa | Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - D ≤ 100 mm - 930 MPa ≤ R ≤ 1080 MPa; German and English version EN 3507:2006 |
| DIN EN 3523-2007 | 航空航天系列.FE-PL1505(15CrMoV6)型钢.空气熔炼.淬火和回火.加工用棒材.De≤100mm.1080MPa≤R<(指数)m>≤1 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De 100 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3523:2007 |
| DIN EN 3524-2007 | 航空航天系列.FE-PL1505(15CrMoV6)型钢.空气熔炼.淬火和回火.薄板材和带材.2mm≤a≤6mm.1080MPa≤R<(指数)m | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm a 6 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3524:2007 |
| DIN EN 3525-2007 | 航空航天系列.FE-PL1505(15CrMoV6)型钢.空气熔炼.淬火和回火.厚板材.6mm＜a≤20mm.1080MPa≤R<(指数)m>≤12 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm a 20 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3525:2007 |
| DIN EN 3526-2007 | 航空航天系列.FE-PL1505(15CrMoV6)型钢.空气熔炼.淬火和回火.薄板材和带材.0.5mm≤a≤6mm.980MPa≤R<(指数) | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm a 6 mm - 980 MPa R<(Index)m> 1180 MPa; German and English version EN 3526:2007 |
| DIN EN 3527-2007 | 航空航天系列.FE-PL1504(33CrMoV12)型钢.空气熔炼.软化.锻坯.a或D≤300mm | Aerospace series - Steel FE-PL1504 (33CrMoV12) - Air melted - Softened - Forging stock - a or D 300 mm; German and English version EN 3527:2007 |
| DIN EN 3531-2007 | 航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型钢.真空感应熔炼和真空电弧再熔炼.溶解处理和沉淀处理.薄板材和 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a 6 mm - 1 750 MPa R<(Index)m> 2 000 MPa; German and English version EN 3531:2007 |
| DIN EN 3532-2007 | 航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型钢.真空感应熔炼和真空电弧再熔炼.溶解处理和沉淀处理.厚板材.6m | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm a 40 mm - 1 750 MPa R<(Index)m> 2 000 MPa; German and English version EN 3532:2007 |
| DIN EN 3536-2007 | 航空航天系列.MoS<(指数)2>润滑的自锁耐热钢六角螺母.等级:1100MPa(室温)/315℃ | Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3536:2006 |
| DIN EN 3541-1992 | 航空航天.带螺纹杆的自调节关节轴承的可调控制杆端部.尺寸、力矩、间隙和负荷 | Aerospace series; rod-ends, adjustable, self-aligning ball bearing, with threaded shank; dimensions, torques, clearances and loads; german version EN 3541:1992 |
| DIN EN 3542-1998 | 航空航天.自锁、耐高温镍基合金NIPH2801(因康X750)制金属丝螺纹组件 | Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750); German version EN 3542:1998 |
| DIN EN 3543-1997 | 航空航天系列.钝化耐蚀耐高温钢短螺纹带翼形十字槽100度沉头紧配合螺丝.等级:1100MPa/425℃ | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3543:1997 |
| DIN EN 3545-001-2007 | 航空航天系列.工作温度-55℃～175℃后部密封或非密封的塑料外壳连接的矩形连接器.技术规范 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 001: Technical specification; German and English version EN 3545-001:2005 |
| DIN EN 3545-002-2006 | 航空航天系列.工作温度-55℃～175℃后部密封或非密封的、塑料壳体固定装置矩形连接器.第002部分:性能和接触 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 002: Specification of performance and contact arrangements; German and English version EN 3545-002:2005 |
| DIN EN 3545-003-2006 | 航空航天系列.工作温度-55℃至175℃后部密封或非密封的、塑料壳体矩形连接器.第003部分:插孔接点的连接器. | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard; German and English version EN 3545-003:2005 |
| DIN EN 3545-004-2006 | 航空航天系列.工作温度-55℃至175℃后部密封或非密封的、塑料壳体矩形连接器.第004部分:插塞接点的连接器. | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard; German and English version EN 3545-004:2005 |
| DIN EN 3545-005-2007 | 航空航天系列.工作温度为-55℃～175℃塑料壳体锁紧装置后部密封或非密封的矩形电连接器.第005部分:不固定外 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 005: Female coding and attachment System for mounting on free housing (plug) - Product standard; German and English version EN 3545-005:2006 |
| DIN EN 3545-006-2007 | 航空航天系列.工作温度为-55℃～175℃塑料壳体锁紧装置后部密封或非密封的矩形电连接器.第006部分:固定外壳 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 006: Male coding and attachment System for mounting on fixed housing (receptacle) - Product standard; German and English version EN 3545-006:2006 |
| DIN EN 3545-007-2006 | 航空航天系列.工作温度-55℃至175℃后部密封或非密封的、塑料壳体矩形连接器.第007部分:电缆夹.产品标准 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 007: Cable clamp - Product standard; German and English version EN 3545-007:2005 |
| DIN EN 3552-2006 | 航空航天系列.铝合金AL-P2618A-T6或T62.覆层薄板和带材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 3552:2005 |
| DIN EN 3553-2006 | 航空航天系列.铝合金AL-P2618A-T6511.挤压棒材和型材.a/D≤160 mm | Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section - a or D ≤ 160 mm; German and English version EN 3553:2004 |
| DIN EN 3561-2004 | 航空航天系列.钛合金管连接件8°30'.在管端焊接和轧制的带动梁密封端头的箍 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end; German and English version EN 3561:2001 + AC:2003 |
| DIN EN 3566-2004 | 航空航天系列.钛合金管连接件8°30'.带锁紧环的接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Adaptors with lockring; German and English version EN 3566:2001 + AC:2003 |
| DIN EN 3567-001-2003 | 航空航天系列.符合MIL-STD-1553B的多路传送数据总线系统串联耦合器.第001部分:技术规范 | Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 001: Technical specification; German and English version EN 3567-001:2001 |
| DIN EN 3567-003-2003 | 航空航天系列.符合MIL-STD-1553B的多路传送数据总线系统串联耦合器.第003部分:单个的串联耦合器.产品标准 | Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers; Product standard; German and English version EN 3567-003:2001 |
| DIN EN 3567-004-2003 | 航空航天系列.符合MIL-STD-1553B的多路传送数据总线系统串联耦合器.第004部分:复式串联耦合器.产品标准 | Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers; Product standard; German and English version EN 3567-004:2001 |
| DIN EN 3611-1995 | 航空航天.套筒.尺寸和配合选择.设计标准 | Aerospace series - Spigots - Dimensions and fit selection; design standard; German version EN 3611:1995 |
| DIN EN 3612-1996 | 航空航天系列.花键槽.设计标准 | Aerospace series - Undercuts for splines - Design standard; German version EN 3612:1996 |
| DIN EN 3626-2007 | 航空航天系列.MoS<(指数)2>润滑的镀镉钢制自锁六角螺母.等级:1100MPa(室温)/235℃ | Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3626:2006 |
| DIN EN 3638-2007 | 航空航天系列.FE-PA2601(X6NiCrTiMoV26-15)型耐热合金.自耗电极再熔炼.溶解和沉淀处理.0.5mm≤a≤10mm的薄 | Aerospace series - Heat resisting alloy FE-PA2601(X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm a 10 mm; German and English version EN 3638:2007 |
| DIN EN 3642-1996 | 航空航天系列.钛TI-P02阳极处理圆顶100度普通沉头实心铆钉.英制系列 | Aerospace series - Rivets, solid, 100° countersunk normal head, with dome, in titanium TI-PO2, anodized - Inch based series; German version EN 3642:1996 |
| DIN EN 3643-1996 | 航空航天系列.钛TI-P02阳极处理100度普通沉头实心铆钉.英制系列 | Aerospace series - Rivets, solid, 100° countersunk normal head, in titanium TI-PO2, anodized - Inch based series; German version EN 3643:1996 |
| DIN EN 3644-1996 | 航空航天系列.钛TI-P02阳极处理通用头实心铆钉.英制系列 | Aerospace series - Rivets, solid, universal head, in titanium TI-PO2, anodized - Inch based series; German version EN 3644:1996 |
| DIN EN 3646-003-2007 | 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第003部分:方形法兰安装插座.产品标准. | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptacle, square flange mounting - Product standard; German and English version EN 3646-003:2006 |
| DIN EN 3646-004-2007 | 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第004部分:锁紧螺母安装插座.产品标准 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard; German and English version EN 3646-004:2006 |
| DIN EN 3646-005-2007 | 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第005部分:方形法兰安装密封插座.产品 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard; German and English version EN 3646-005:2006 |
| DIN EN 3646-006-2007 | 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第006部分:锁紧螺母安装密封插座.产品 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard; German and English version EN 3646-006:2006 |
| DIN EN 3646-007-2007 | 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第007部分:圆形法兰焊接或铜焊接安装密 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard; German and English version EN 3646-007:2006 |
| DIN EN 3646-008-2007 | 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第008部分:插头.产品标准 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 008: Plug - Product standard; German and English version EN 3646-008:2006 |
| DIN EN 3646-009-2007 | 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第009部分:插座保护盖.产品标准 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Protective cover for receptacle - Product standard; German and English version EN 3646-009:2006 |
| DIN EN 3646-010-2007 | 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第010部分:插头保护盖.产品标准 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Protective cover for plug - Product standard; German and English version EN 3646-010:2006 |
| DIN EN 3646-011-2007 | 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第011部分模拟插座.产品标准 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 011: Dummy receptacle - Product standard; German and English version EN 3646-011:2006 |
| DIN EN 3660-001-2007 | 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.第001部分:技术规范 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification; German and English version EN 3660-001:2006 |
| DIN EN 3660-002-2007 | 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.第002部分:产品标准的索引 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 002: Index of product standards; German and English version EN 3660-002:2006 |
| DIN EN 3660-003-2007 | 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.第003部分:EN 2997和EN 4067中A型穿孔螺母.产品标准 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard; German and English version EN 3660-003:2006 |
| DIN EN 3660-004-2007 | 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.第004部分:EN2997和EN4067带应变消除夹的非密封直形A | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard; German and English version EN 3660-004:2006 |
| DIN EN 3660-005-2007 | 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.第005部分:EN2997和EN4967中带应变消除夹未密封的A型9 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90° unsealed, with clamp strain relief for EN 2997 and EN 4967 - Product standard; German and English version EN 3660-005:2006 |
| DIN EN 3663-2004 | 航空航天系列.管连接件.丁腈橡胶制成的O形环.75IRHD.温度范围:-55℃到+135℃ | Aerospace series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, Temperature range: - 55 °C to 135 °C; German and English version EN 3663:2001 + AC:2003 |
| DIN EN 3665-1997 | 航空航天系列.清漆和涂料试验方法.铝合金耐纤维状腐蚀试验 | Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys; German version EN 3665:1997 |
| DIN EN 3668-2007 | 航空航天系列.FE-PL1501(30CrMo12)型钢.非热处理的.锻件坯料.a或D≤250mm | Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D ≤ 250 mm; German and English version EN 3668:2006 |
| DIN EN 3671-2007 | 航空航天系列.NI-PH3601(NiCr22Mo9Nb)型抗热合金.非热处理.锻坯.a或D≤250mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D 250 mm; German and English version EN 3671:2007 |
| DIN EN 3676-1998 | 航空航天系列.薄壁自锁镶嵌件.设计标准 | Aerospace series - Inserts, thin wall, self-locking - Design standard; German version EN 3676:1998 |
| DIN EN 3677-2007 | 航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气熔炼.溶解处理和沉淀处理.锻件.a或D≤200mm.R<(指数)m>≥13 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - R<(Index)m> 1 310 MPa; German and English version EN 3677:2007 |
| DIN EN 3678-2007 | 航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气熔炼.溶解处理和沉淀处理.锻件.a或D≤200mm.R<(指数)m>≥93 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - R<(Index)m> 930 MPa; German and English version EN 3678:2007 |
| DIN EN 3683-2007 | 航空航天系列.试验方法.钛合金锻造制品.初级α含量的测定.点数法和线截法 | Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary content - Point count method and line intercept method; German and English version EN 3683:2007 |
| DIN EN 3684-2007 | 航空航天系列.试验方法.钛合金锻造制品.β转变温度的测定.金相法 | Aerospace series - Test methods - Titanium alloy wrought products - Determination of transus temperature - Metallographic method; German and English version EN 3684:2007 |
| DIN EN 3688-2004 | 航空航天系列.焊接管用钛合金制成的T环形填充物.14000kPa标称压力 | Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14000 kPa nominal pressure; German and English version EN 3688:2001 + AC:2003 |
| DIN EN 3689-2004 | 航空航天系列.焊接管用钛合金制成的T环形填充物.28000kPa标称压力 | Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure; German and English version EN 3689:2001 + AC:2003 |
| DIN EN 3690-2004 | 航空航天系列.钛合金管连接件8°30'.长闷头活接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long; German and English version EN 3690:2001 + AC:2003 |
| DIN EN 3691-2004 | 航空航天系列.钛合金管连接件8°30'.焊接端长闷头活接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long, welded end; German and English version EN 3691:2001 + AC:2003 |
| DIN EN 3696-2003 | 航空航天系列.耐热钢洗衣机 | Aerospace series - Washers in heat resisting steel; German and English version EN 3696:2001 |
| DIN EN 3708-001-2007 | 航空航天系列.模块化互连系统.终端连接系统.第001部分:技术规范 | Aerospace series - Modular interconnection systems - Terminal junction systems - Part 001: Technical specification; German and English version EN 3708-001:2006 |
| DIN EN 3708-002-2007 | 航空航天系列.模块化互连系统.终端连接系统.第002部分:性能规范 | Aerospace series - Modular interconnection systems - Terminal junction systems - Part 002: Performance specification; German and English version EN 3708-002:2006 |
| DIN EN 3708-003-2007 | 航空航天系列.模块化互连系统.终端连接系统.第003部分:密封移动式反馈模块版本.产品标准 | Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard; German and English version EN 3708-003:2006 |
| DIN EN 3708-004-2007 | 航空航天系列.模块化互连系统.终端连接系统.第004部分:非密封移动式反馈模块版本.产品标准 | Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard; German and English version EN 3708-004:2006 |
| DIN EN 3708-005-2007 | 航空航天系列.模块化互连系统.终端连接系统.第005部分:密封和非密封反馈模块版本用带附件的框架.产品标准 | Aerospace series - Modular interconnection systems - Terminal junction systems - Part 005: Frames with accessories for feedback modules version, sealed and unsealed - Product standard; German and English version EN 3708-005:2006 |
| DIN EN 3709-2007 | 航空航天系列.十二角扳手和套筒.技术规范 | Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification; German and English version EN 3709:2006 |
| DIN EN 3712-2007 | 航空航天系列.MoS2润滑的镀镉钢制沉孔缩径固定式单耳自锁紧系紧螺母.分类:1100MPa(室温)/235℃ | Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3712:2007 |
| DIN EN 3716-001-2007 | 航空航天系列.数字数据传输用带三维接口的单路连接器.第001部分:技术规范 | Aerospace series - Connector, single-way, with triaxial interface, for transmission of digital data - Part 001: Technical specification; German and English version EN 3716-001:2006 |
| DIN EN 3716-002-2007 | 航空航天系列.数字数据传输用带三维接口的单路连接器.第002部分:使用条件和产品标准清单 | Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions of use and list of product standards; German and English version EN 3716-002:2006 |
| DIN EN 3716-003-2007 | 航空航天系列.数字数据传输用带三维接口的单路连接器.第003部分:焊接插座.产品标准 | Aerospace series - Connectors, single-way with traxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard; German and English version EN 3716-003:2006 |
| DIN EN 3716-004-2007 | 航空航天系列.数字数据传输用带三维接口的单路连接器.第004部分:焊接插头.产品标准 | Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard; German and English version EN 3716-004:2006 |
| DIN EN 3719-2006 | 航空航天系列.电缆的铝或铝合金导体.产品标准 | Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard; German and English version EN 3719:2005 |
| DIN EN 3720-1995 | 航空航天系列.加 MoS<下标2> 涂层的耐高温钢 FE-PA92HT(A286) 自锁十二角螺母.等级:1100 MPa (室温)/425℃; | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3720:1995 |
| DIN EN 3721-1995 | 航空航天系列.加 MoS<下标2> 涂层的耐高温钢 FE-PA92HT(A286) 深沉孔自锁十二角螺母.等级:1100 MPa (室温)/ | Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3721:1995 |
| DIN EN 3722-1995 | 航空航天系列.加 MoS<下标2> 涂层的耐高温钢FE-PA92HT(A286)自锁铆钉体螺母.等级:1100MPa(室温)/425℃; 德 | Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3722:1995 |
| DIN EN 3723-1996 | 航空航天系列.高温钢FE-PA92HT(A286)MoS2涂覆自锁六角螺母.等级:1100 MPa(室温下)/425℃ | Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3723:1996 |
| DIN EN 3724-2005 | 航空航天系列.MoS2涂覆的钛合金TI-P64001制长螺纹细杆双六角头螺栓.强度等级:1100 MPa(室温) | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3724:2004 |
| DIN EN 3725-2005 | 航空航天系列.MoS2涂覆的阳极化处理的钛合金TI-P64001制长螺纹标准杆六凸角凹口盘头螺钉.强度等级:1100 MPa | Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3725:2004 |
| DIN EN 3726-2005 | 航空航天系列.MoS2耐热钢FE-PA2601 (A286)制自锁紧夹紧螺母.强度等级:1100 MPa(室温)/425鳦 | Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3726:2004 |
| DIN EN 3727-2007 | 航空航天系列.有法兰定位盖的飞机机架用滚动轴承.技术规范 | Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification; German and English version EN 3727:2006 |
| DIN EN 3730-2003 | 航空航天系列.带橡胶垫圈的铝合金固定和滑动支架夹具.尺寸和质量 | Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses; German and English version EN 3730:2001 |
| DIN EN 3733-008-2007 | 航空航天系列.连续工作温度150°C自锁紧环连接的单路圆形光连接器.第008部分:EN4532(200mu/280mu纤维)的电 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard; German and English version EN 3733-008:2006 |
| DIN EN 3733-009-2007 | 航空航天系列.连续工作温度150°C自锁紧环连接的单路圆形光学连接器.第009部分:EN4532(200mu/280mu纤维)的 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard; German and English version EN 3733-009:2006 |
| DIN EN 3740-1996 | 航空航天系列.钛合金阳极处理MoS<2>锻造短螺纹小头六角配合螺钉.等级:1100MPa(室温)/315℃ | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3740:1996 |
| DIN EN 3741-2005 | 航空航天系列.米制夹紧螺母.安装孔及组件 | Aerospace series - Nuts, clip, metric - Installation holes and assembly; German and English version EN 3741:2004 |
| DIN EN 3745-201-2003 | 航空航天系列.飞机光纤和电缆.试验方法.第201部分:外观检查 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 201: Visual examination; German and English version EN 3745-201:2002 |
| DIN EN 3745-205-2003 | 航空航天系列.飞机光纤和电缆.试验方法.第205部分:电缆纵向尺寸稳定性 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability; German and English version EN 3745-205:2002 |
| DIN EN 3745-301-2003 | 航空航天系列.飞机光纤和电缆.试验方法.第301部分:衰减 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 301: Attenuation; German and English version EN 3745-301:2002 |
| DIN EN 3745-302-2003 | 航空航天系列.飞行器用光纤和电缆.试验方法.第302部分:数字孔径 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 302: Numerical aperture; German and English version EN 3745-302:2002 |
| DIN EN 3745-305-2003 | 航空航天系列.飞机光纤和电缆.试验方法.第305部分:周围光耦合的消除 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 305: Immunity to ambient light coupling; German and English version EN 3745-305:2002 |
| DIN EN 3745-504-2003 | 航空航天系列.飞机光纤和电缆.试验方法.第504部分:微弯曲试验 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 504: Micro bending test; German and English version EN 3745-504:2002 |
| DIN EN 3745-507-2003 | 航空航天系列.飞机光纤和电缆.试验方法.第507部分:切开 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 507: Cut-through; German and English version EN 3745-507:2002 |
| DIN EN 3745-508-2003 | 航空航天系列.飞机光纤和电缆.试验方法.第508部分:扭转 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 508: Torsion; German and English version EN 3745-508:2002 |
| DIN EN 3745-509-2003 | 航空航天系列.飞机光纤和电缆.试验方法.第509部分:纽结试验 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 509: Kink test; German and English version EN 3745-509:2002 |
| DIN EN 3745-510-2003 | 航空航天系列.飞机光纤和电缆.试验方法.第510部分:弯曲试验 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 510: Bending test; German and English version EN 3745-510:2002 |
| DIN EN 3745-511-2002 | 航空航天系列.航空用光缆.试验方法.第511部分:电缆间的磨损; 德文和英文版本 EN 3745-511:2002 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable to cable abrasion; German and English version EN 3745-511:2002 |
| DIN EN 3745-701-2002 | 航空航天系列.航空用光缆.试验方法.第701部分:可剥离性: 德文和英文版本 EN 3745-701:2002 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 701: Strippability; German and English version EN 3745-701:2002 |
| DIN EN 3745-703-2007 | 航空航天系列.飞机用光纤与光缆.试验方法.第703部分:商标耐磨损性 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking; German and English version EN 3745-703:2005 |
| DIN EN 3746-2006 | 航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.硬度为80IRHD | Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD; German and English version EN 3746:2003 |
| DIN EN 3747-2005 | 航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.技术规范 | Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification; German and English version EN 3747:2003 |
| DIN EN 3748-2002 | 航空航天系列.O形密封圈凹槽.尺寸; 德文和英文版本 EN 3748:2001 | Aerospace series - O-ring grooves - Dimensions; German and English version EN 3748:2001 |
| DIN EN 3752-2005 | 航空航天系列.MoS2涂覆的耐热钢FE-PA2601 (A286)制MJ螺纹自锁紧螺母.等级:1100 MPa(室温)/425 鳦.技术规范 | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C - Technical specification; German and English version EN 3752:2004 |
| DIN EN 3759-1996 | 航空航天系列.耐蚀耐高温钢钝化螺纹接近根部带翼型十字槽平头螺钉.等级:1100MPa(室温)/425℃ | Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3759:1996 |
| DIN EN 3760-1996 | 航空航天系列.耐蚀耐高温钢钝化螺纹接近根部带翼型十字槽100度沉头螺钉.等级:1100MPa(室温)/425℃ | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3760:1996 |
| DIN EN 3769-1997 | 航空航天系列.耐蚀钢和耐高温合金电解抛光 | Aerospace series - Electrolytic polishing of corrosion resistant steels and heat resisting alloys; German version EN 3769:1997 |
| DIN EN 3773-001-1999 | 航空和航天.额定电流为1A至25A、最大开断容量65I/1000A 单刀温度补偿断路器.第001部分:技术规范 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I<(Index)n>/1000 A max. - Part 001: Technical specification; German version EN 3773-001:1999 |
| DIN EN 3773-003-1999 | 航空和航天.额定电流为1A至25A、最大开断容量65I/1000A 、单刀温度补偿断路器.第003部分:米制螺纹端子.产品 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I<(Index)n>/1000 A max. - Part 003: Metric thread terminals; product standard; German version EN 3773-003:1999 |
| DIN EN 3773-004-1999 | 航空和航天.单极,温度补偿,额定电流为1A至25A,开断容量65 In/1000A max的断路器.第004部分:UNC螺纹端子.产 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I<(Index)n>/1000 A max. - Part 004: UNC thread terminals; product standard; German version EN 3773-004:1999 |
| DIN EN 3774-001-1999 | 航空和航天.三极,温度补偿,额定电流为2A至25A,开断容量65In的断路器.第001部分:技术规范 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 001: Technical specification; German version EN 3774-001:1999 |
| DIN EN 3774-003-1999 | 航空和航天.三极,温度补偿,额定电流为2A至25A,开断容量65In的断路器.第003部分:米制螺纹端子.产品标准 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 003: Metric thread terminals; product standard; German version EN 3774-003:1999 |
| DIN EN 3774-004-1999 | 航空和航天.额定电流为2A至25A、开断容量为65I、三刀温度补偿断路器.第004部分:UNC螺纹端子.产品标准 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 004: UNC thread terminals; product standard; German version EN 3774-004:1999 |
| DIN EN 3788-2004 | 航空航天系列.管连接件8°30'.防护管帽 | Aerospace series - Pipe coupling 8°30 - Protective caps; German and English version EN 3788:2001 + AC:2003 |
| DIN EN 3789-2004 | 航空航天系列.管连接件8°30'.带外螺纹的防护管塞 | Aerospace series - Pipe coupling 8°30 - Protective plugs with external threads; German and English version EN 3789:2001 + AC:2003 |
| DIN EN 3790-2004 | 航空航天系列.管连接件8°30'.带内螺纹的防护管帽 | Aerospace series - Pipe coupling 8°30 - Protective caps with internal threads; German and English version EN 3790:2001 + AC:2003 |
| DIN EN 3816-2007 | 航空航天系列.FE-PA3601(X6CrNiTi18-10)钢.气体融化.软化退火和冷轧.薄板材和带材.a≤3mm.Rm≤800 MPa | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and cold rolled - Sheet and strip a ≤ 3 mm - R ≥ 800 MPa; German and English version EN 3816:2006 |
| DIN EN 3818-2005 | 航空航天系列.钛合金TI-P64001制MJ螺纹螺栓.强度等级:1100 MPa(室温).技术规范 | Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification; German and English version EN 3818:2004 |
| DIN EN 3820-2007 | 航空航天系列.MoS2润滑的阳极化钛合金短螺纹标准杆粗公差普通六角头米制螺钉.等级:1100MPa(室温下)/315℃ | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2006 |
| DIN EN 3831-2005 | 航空航天系列.MoS2涂覆的耐热钢FE-PM3801 (17-4PH)制自锁紧MJ螺纹厚壁插件 | Aerospace series - Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS<(Index)2> coated; German and English version EN 3831:2004 |
| DIN EN 3832-2005 | 航空航天系列.耐热镍基合金NI-P100HT(铬镍铁合金718)制长螺纹细杆双六角头螺栓.等级:1550MPa(室温)/650℃ | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 3832:2004 |
| DIN EN 3833-2005 | 航空航天系列.钝化的耐热镍基合金NI-PH2601(铬镍铁合金718)制MJ螺纹螺栓.等级:1550MPa(室温)/650℃.技术规 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature)/ 650 °C - Technical specification; German and English version EN 3833:2004 |
| DIN EN 3840-2007 | 航空航天系列.涂料和清漆.技术规范 | Aerospace series - Paints and varnishes - Technical specification; German and English version EN 3840:2007 |
| DIN EN 3841-100-2005 | 航空航天系列.断路器.试验方法.第100部分:总则 | Aerospace series - Circuit breakers - Test methods - Part 100: General; German and English version EN 3841-100:2004 |
| DIN EN 3841-201-2005 | 航空航天系列.断路器.试验方法.第201部分:外观检查 | Aerospace series - Circuit breakers - Test methods - Part 201: Visual inspection; German and English version EN 3841-201:2004 |
| DIN EN 3841-202-2005 | 航空航天系列.断路器.试验方法.第202部分:尺寸和质量 | Aerospace series - Circuit breakers - Test methods - Part 202: Dimensions and masses; German and English version EN 3841-202:2004 |
| DIN EN 3841-301-2005 | 航空航天系列.断路器.试验方法.第301部分:电压降 | Aerospace series - Circuit breakers - Test methods - Part 301: Voltage drop; German and English version EN 3841-301:2004 |
| DIN EN 3841-302-2005 | 航空航天系列.断路器.试验方法.第302部分:绝缘电阻 | Aerospace series - Circuit breakers - Test methods - Part 302: Insulation resistance; German and English version EN 3841-302:2004 |
| DIN EN 3841-303-2005 | 航空航天系列.断路器.试验方法.第303部分:介电强度 | Aerospace series - Circuit breakers - Test methods - Part 303: Dielectric strength; German and English version EN 3841-303:2004 |
| DIN EN 3841-304-2005 | 航空航天系列.断路器.试验方法.第304部分:跳闸点 | Aerospace series - Circuit breakers - Test methods - Part 304: Tripping points; German and English version EN 3841-304:2004 |
| DIN EN 3841-305-2005 | 航空航天系列.断路器.试验方法.第305部分:短路性能 | Aerospace series - Circuit breakers - Test methods - Part 305: Short-circuit performance; German and English version EN 3841-305:2004 |
| DIN EN 3841-306-2005 | 航空航天系列.断路器.试验方法.第306部分:使用寿命 | Aerospace series - Circuit breakers - Test methods - Part 306: Service life; German and English version EN 3841-306:2004 |
| DIN EN 3841-307-2005 | 航空航天系列.断路器.试验方法.第307部分:带锁定跳闸装置的断路器的性能 | Aerospace series - Circuit breakers - Test methods - Part 307: Performance with a locked tripping system; German and English version EN 3841-307:2004 |
| DIN EN 3841-308-2005 | 航空航天系列.断路器.试验方法.第308部分:闪电 | Aerospace series - Circuit breakers - Test methods - Part 308: Lightning; German and English version EN 3841-308:2004 |
| DIN EN 3841-401-2005 | 航空航天系列.断路器.试验方法.第401部分:沙尘 | Aerospace series - Circuit breakers - Test methods - Part 401: Sand and dust; German and English version EN 3841-401:2004 |
| DIN EN 3841-402-2005 | 航空航天系列.断路器.试验方法.第402部分:腐蚀 | Aerospace series - Circuit breakers - Test methods - Part 402: Corrosion; German and English version EN 3841-402:2004 |
| DIN EN 3841-403-2005 | 航空航天系列.断路器.试验方法.第403部分:湿度 | Aerospace series - Circuit breakers - Test methods - Part 403: Humidity; German and English version EN 3841-403:2004 |
| DIN EN 3841-404-2005 | 航空航天系列.断路器.试验方法.第404部分:防爆性 | Aerospace series - Circuit breakers - Test methods - Part 404: Explosion proofness; German and English version EN 3841-404:2004 |
| DIN EN 3841-405-2005 | 航空航天系列.断路器.试验方法.第405部分:防水 | Aerospace series - Circuit breakers - Test methods - Part 405: Fluid resistance; German and English version EN 3841-405:2004 |
| DIN EN 3841-406-2005 | 航空航天系列.断路器.试验方法.第406部分:易燃性 | Aerospace series - Circuit breakers - Test methods - Part 406: Flammability; German and English version EN 3841-406:2004 |
| DIN EN 3841-407-2006 | 航空航天系列.断路器.试验方法.第407部分:温度变化 | Aerospace series - Circuit breakers - Test methods - Part 407: Temperature variation; German and English version EN 3841-407:2004 |
| DIN EN 3841-501-2005 | 航空航天系列.断路器.试验方法.第501部分:调整片操纵按钮调动 | Aerospace series - Circuit breakers - Test methods - Part 501: Actuator button travel; German and English version EN 3841-501:2004 |
| DIN EN 3841-502-2005 | 航空航天系列.断路器.试验方法.第502部分:操纵力 | Aerospace series - Circuit breakers - Test methods - Part 502: Operating forces; German and English version EN 3841-502:2004 |
| DIN EN 3841-503-2005 | 航空航天系列.断路器.试验方法.第503部分:传动组件强度 | Aerospace series - Circuit breakers - Test methods - Part 503: Strength of actuating components; German and English version EN 3841-503:2004 |
| DIN EN 3841-504-2005 | 航空航天系列.断路器.试验方法.第504部分:安装元件强度 | Aerospace series - Circuit breakers - Test methods - Part 504: Strength of mounting elements; German and English version EN 3841-504:2004 |
| DIN EN 3841-505-2005 | 航空航天系列.断路器.试验方法.第505部分:主接线端强度 | Aerospace series - Circuit breakers - Test methods - Part 505: Strength of main terminals; German and English version EN 3841-505:2004 |
| DIN EN 3841-506-2005 | 航空航天系列.断路器.试验方法.第506部分:抗振性能 | Aerospace series - Circuit breakers - Test methods - Part 506: Vibration performance; German and English version EN 3841-506:2004 |
| DIN EN 3841-507-2005 | 航空航天系列.断路器.试验方法.第507部分:机械冲击 | Aerospace series - Circuit breakers - Test methods - Part 507: Mechanical shocks; German and English version EN 3841-507:2004 |
| DIN EN 3841-508-2005 | 航空航天系列.断路器.试验方法.第508部分:离心式加速 | Aerospace series - Circuit breakers - Test methods - Part 508: Centrifugal acceleration; German and English version EN 3841-508:2004 |
| DIN EN 3841-509-2005 | 航空航天系列.断路器.试验方法.第509部分:信号接线柱的插入力和拔出力 | Aerospace series - Circuit breakers - Test methods - Part 509: Insertion and extraction forces of signal contact terminals; German and English version EN 3841-509:2004 |
| DIN EN 3841-510-2005 | 航空航天系列.断路器.试验方法.第510部分:信号接线柱强度 | Aerospace series - Circuit breakers - Test methods - Part 510: Strength of signal contact terminals; German and English version EN 3841-510:2004 |
| DIN EN 3841-511-2005 | 航空航天系列.断路器.试验方法.第511部分:组合试验:温度、高度和振动 | Aerospace series - Circuit breakers - Test methods - Part 511: Combined test: temperature, altitude and vibration; German and English version EN 3841-511:2004 |
| DIN EN 3842-2003 | 航空航天系列.耐腐蚀钢液体用圆环管.尺寸.直径3.2mm～100mm 厚度0.32～2.5 mm | Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm D 100 mm, thickness 0,32 mm a 2,5 mm; Dimensions; German and English version EN 3842:2001 |
| DIN EN 3848-2003 | 航空航天系列.半成品金属产品.形状偏差测量方法 | Aerospace series - Semi-finished metallic products - Methods of measuring form deviations; German and English version EN 3848:2001 |
| DIN EN 3851-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.直转动螺套 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nut, straight; German and English version EN 3851:2003 |
| DIN EN 3852-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.有螺纹的焊接直活管节 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded; German and English version EN 3852:2002 |
| DIN EN 3853-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.有螺纹直活管节 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, threaded; German and English version EN 3853:2002 |
| DIN EN 3854-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.焊接套圈 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Ferrules, welded; German and English version EN 3854:2002 |
| DIN EN 3855-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.帽 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Caps; German and English version EN 3855:2002 |
| DIN EN 3856-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.推力线用转动螺套 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire; German and English version EN 3856:2002 |
| DIN EN 3857-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.90焊接弯头 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Elbows 90°, welded; German and English version EN 3857:2002 |
| DIN EN 3858-2003 | 航空航天系列.钛合金TI-P64001、球形、60度管连接器.止推钢丝FE-PA 13 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA 13; German and English version EN 3858:2002 |
| DIN EN 3867-2007 | 航空航天系列.管连接件、活动法兰和密封件.TI-P64001型钛合金法兰 | Aerospace series - Pipe couplings, loose flanges and seals - Flanges in titanium alloy TI-P64001; German and English version EN 3867:2004 |
| DIN EN 3868-2007 | 航空航天系列.管连接件、活动法兰和密封件.TI-P64001型钛合金焊接法兰联接件 | Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001; German and English version EN 3868:2004 |
| DIN EN 3869-2007 | 航空和航天系列.管道联接件、活动法兰和密封件.铝合金碳氟橡胶和电枢密封件 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; German and English version EN 3869:2004 |
| DIN EN 3872-2005 | 航空航天系列.铝合金AL-R39002-H112.模锻件.a 200 mm | Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a 200 mm; German and English version EN 3872:2005 |
| DIN EN 3882-2002 | 航空航天系列.耐高温合金NI-WH1801 (NiCr20Co18Ti3Al2).焊接填充金属; 德文版本 EN 3882:2001 | Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding; German version EN 3882:2001 |
| DIN EN 3883-2002 | 航空航天系列.耐高温合金NI-WH2301 (NiCr22Fe19Mo9Co2).焊接填充金属; 德文版本 EN 3883:2001 | Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding; German version EN 3883:2001 |
| DIN EN 3884-2002 | 航空航天系列.耐高温合金NI-WH2601 (NiCr19Nb5Mo3Ti).焊接填充金属; 德文版本 EN 3884:2001 | Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding; German version EN 3884:2001 |
| DIN EN 3885-2002 | 航空航天系列.耐高温合金NI-WH3601 (NiCr22Mo9Nb4).焊接填充金属; 德文版本 EN 3885:2001 | Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding; German version EN 3885:2001 |
| DIN EN 3886-2002 | 航空航天系列.耐高温合金NI-WH1303 (NiCo20Cr20Mo5Ti2Al).焊接填充金属; 德文版本 EN 3886:2001 | Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding; German version EN 3886:2001 |
| DIN EN 3887-2002 | 航空航天系列.耐高温合金CO-WH4101 (CoCr20W15Ni).焊接填充金属; 德文版本 EN 3887:2001 | Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding; German version EN 3887:2001 |
| DIN EN 3888-2002 | 航空航天系列.耐高温合金CO-WH1402 (CoCr22Ni22W15).焊接填充金属; 德文版本 EN 3888:2001 | Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding; German version EN 3888:2001 |
| DIN EN 3889-2003 | 航空航天系列.FE-WM3801钢(X5CrNiCu17-4).焊接填充金属 | Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding; German and English version EN 3889:2001 |
| DIN EN 3890-2003 | 航空航天系列.FE-WM1502钢(X11CrNiMoVN12-3).焊接填充金属 | Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding; German and English version EN 3890:2001 |
| DIN EN 3892-2002 | 航空航天系列.钛合金TI-W64001.焊接填充金属; 德文版本 EN 3892:2001 | Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding; German version EN 3892:2001 |
| DIN EN 3893-2003 | 航空航天系列.TI-W19001型钛合金.焊接用金属填充料 | Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding; German and English version EN 3893:2001 |
| DIN EN 3894-2002 | 航空航天系列.耐高温合金NI-WD3201 (NiMo25Fe6Cr5).焊接填充金属; 德文版本 EN 3894:2001 | Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding; German version EN 3894:2001 |
| DIN EN 3895-2002 | 航空航天系列.耐高温合金NI-WH3901 (NiCr16Mo15).焊接填充金属; 德文版本 EN 3895:2001 | Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding; German version EN 3895:2001 |
| DIN EN 3896-2003 | 航空航天系列.FE-WM1501钢(X13CrNiMoCo12-3-2-2).焊接填充金属 | Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding; German and English version EN 3896:2001 |
| DIN EN 3897-2003 | 航空航天系列.FE-WA4801钢(X6CrNiMnNb18-10).焊接填充金属 | Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding; German and English version EN 3897:2001 |
| DIN EN 3899-2007 | 航空航天系列.耐热钢FE-PM3801(17-4PH)制MJ螺纹自锁紧厚壁嵌镶件.技术规范 | Aerospace series - Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH) - Technical specification; German and English version EN 3899:2004 |
| DIN EN 3907-2006 | 航空航天系列.标准杆、长螺纹、双六角头、镀MoS<指数2>的钛合金TI-P64001螺栓.等级:1100MPa(室温)/350°C. | Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/350 °C: German and English version EN 3907:2004 |
| DIN EN 3912-2007 | 航空航天系列.镀银、FE-PA2601(FE-PA92HT,A286)型、长螺纹、细杆、六瓣凹槽、平头螺栓耐热钢.分类:1100MPa( | Aerospace series - Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3912:2007 |
| DIN EN 3917-1998 | 航空航天系列.NI-B41201( NiCrSi5b3C )镍基合金.粉状或糊状硬焊金属填料 | Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing, powder or paste; German version EN 3917:1998 |
| DIN EN 3918-1998 | 航空航天系列.NI-B41201(NiCrSi5b3C)镍基合金.带状硬焊金属填料 | Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing, tape; German version EN 3918:1998 |
| DIN EN 3919-1998 | 航空航天系列.NI-B41202 (NiCr14Si5B3)镍基合金.硬钎焊用金属填料.非结晶薄片 | Aerospace series - Nickel base alloy NI-B41202 (NiCr14Si5B3) - Filler metal for brazing - Amorphous foil; German version EN 3919:1998 |
| DIN EN 3920-2004 | 航空航天系列.镍基合金NI-B41202 (NiCr14Fe5Si5B3).硬钎焊用粉末状和膏状填充金属 | Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing, powder or paste; German and English version EN 3920:2001 |
| DIN EN 3921-2001 | 航空航天系列.镍基合金 Ni-B41203(NiCr7Si5B3).硬钎焊填充金属.非晶态箔 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing, amorphous foil; German version EN 3921:2001 |
| DIN EN 3922-1998 | 航空航天系列.NI-B41203 (NiCr7Si5B3)镍基合金.硬钎焊用金属填料.硼薄片 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil; German version EN 3922:1998 |
| DIN EN 3923-2004 | 航空航天系列.镍基合金NI-B41203.铜焊用填充金属、粉末或糊料 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing, powder or paste; German and English version EN 3923:2001 |
| DIN EN 3924-1998 | 航空航天系列.NI-B41203 (NiCr7Si5B3)镍基合金.硬钎焊用金属填料.带形焊料 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Tape; German version EN 3924:1998 |
| DIN EN 3925-2001 | 航空航天系列.镍基合金 Ni-B40001(NiSi5B3).硬钎焊填充金属.非晶态箔 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing, amorphous foil; German version EN 3925:2001 |
| DIN EN 3926-2001 | 航空航天系列.镍基合金NI-B40001(NiSi5B3).硬钎焊填充金属.硼化物箔 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing, borided foil; German version EN 3926:2001 |
| DIN EN 3927-2004 | 航空航天系列.镍基合金NI-B40001.铜焊用填充金属、粉末或糊料 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing, powder or paste; German and English version EN 3927:2001 |
| DIN EN 3928-1998 | 航空航天系列.NI-B40001 (NiSi5B3)镍基合金.硬钎焊用金属填料.带形焊料 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Tape; German version EN 3928:1998 |
| DIN EN 3930-2002 | 航空航天系列.镍基合金NI-B31001(NiCr19Si10).硬钎焊用填充金属.粉末或糊料; 德文版本 EN 3930:2001 | Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing, powder or paste; German version EN 3930:2001 |
| DIN EN 3931-1998 | 航空航天系列.NI-B31001(NiCr19Si10)镍基合金.带状硬焊金属填料 | Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing, tape; German version EN 3931:1998 |
| DIN EN 3932-2001 | 航空航天系列.镍基合金NI-B13001(NiP11).硬钎焊用填充金属.非晶形箔 | Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing, amorphous foil; German version EN 3932:2001 |
| DIN EN 3933-2002 | 航空航天系列.镍基合金NI-B13001 (NiP11).铜焊用焊料.粉末或糊料; 德文版本 EN 3933:2001 | Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing, powder or paste; German version EN 3933:2001 |
| DIN EN 3934-2001 | 航空航天系列.镍基合金NI-B21001(NiCr15B4).硬钎焊用填充金属.非晶态箔 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing, amorphous foil; German version EN 3934:2001 |
| DIN EN 3935-2004 | 航空航天系列.镍基合金NI-B21001.铜焊用填充金属、硼化物箔 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing, borided foil; German and English version EN 3935:2001 |
| DIN EN 3936-2002 | 航空航天系列.镍基合金NI-B21001 (NiCr15B4).铜焊用填充金属.粉末或糊料; 德文版本 EN 3936:2001 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing, powder or paste; German version EN 3936:2001 |
| DIN EN 3937-2002 | 航空航天系列.镍基合金NI-B44101 (NiW12Cr10Si4Fe3B3).铜焊用填充金属.粉末或糊料; 德文版本 EN 3937:2001 | Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing, powder or paste; German version EN 3937:2001 |
| DIN EN 3938-2001 | 航空航天系列.镍基合金 Ni-B46001(NiCo20Si5B3).硬钎焊填充金属.非晶态箔 | Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing, amorphous foil; German version EN 3938:2001 |
| DIN EN 3939-2004 | 航空航天系列.镍基合金NI-B46001(NiCo20Si5B3).硬钎焊用粉末状和膏状填充金属 | Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing, powder or paste; German and English version EN 3939:2001 |
| DIN EN 3940-1998 | 航空和航天系列.NI-B46001 (NiCo20Si5B3)镍基合金.硬钎焊用金属填料.带形焊料 | Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Tape; German version EN 3940:1998 |
| DIN EN 3941-2001 | 航空航天系列.镍基合金 Ni-B41204(NiCr13Si4B3).硬钎焊填充金属.非晶态箔 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing, amorphous foil; German version EN 3941:2001 |
| DIN EN 3942-2001 | 航空航天系列.镍基合金NI-B41204(NiCr13Si4B3).硬钎焊填充金属.硼化物箔 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing, borided foil; German version EN 3942:2001 |
| DIN EN 3943-2004 | 航空航天系列.镍基合金NI-B41204.铜焊用填充金属、粉末或糊料 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing, powder or paste; German and English version EN 3943:2001 |
| DIN EN 3944-1998 | 航空和航天系列.NI-B41204 (NiCr13Si4B3)镍基合金.硬钎焊用金属填料.带形焊料 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Tape; German version EN 3944:1998 |
| DIN EN 3945-2004 | 航空航天系列.镍基合金NI-B48801.铜焊用填充金属、粉末或糊料 | Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing, powder or paste; German and English version EN 3945:2001 |
| DIN EN 3946-2004 | 航空航天系列.镍基合金NI-B15701.铜焊用填充金属、粉末或糊料 | Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing, powder or paste; German and English version EN 3946:2001 |
| DIN EN 3947-1998 | 航空和航天系列.NI-B15701 (NiPd34Au30)镍基合金.硬钎焊用金属填料.滚压薄片 | Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil; German version EN 3947:1998 |
| DIN EN 3948-1998 | 航空和航天系列.NI-B15701 (NiPd34Au30)镍基合金.硬钎焊用金属填料.线材焊料 | Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire; German version EN 3948:1998 |
| DIN EN 3952-2002 | 航空航天系列.银基合金AG-B10001 (AgCu28).铜焊用填充金属.金属线; 德文版本 EN 3952:2001 | Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing, wire; German version EN 3952:2001 |
| DIN EN 3953-2002 | 航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).铜焊用填充金属.金属丝; 德文版本 EN 3953:2001 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing, wire; German version EN 3953:2001 |
| DIN EN 3954-2002 | 航空航天系列.银基合金AG-B12401 (AgCu40Zn5Ni).铜焊用填充金属.粉末或糊料; 德文版本 EN 3954:2001 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing, powder or paste; German version EN 3954:2001 |
| DIN EN 3955-2002 | 航空航天系列.银基合金AG-B12401 (AgCu40Zn5Ni).铜焊用填充金属.轧制箔片; 德文版本 EN 3955:2001 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing, rolled foil; German version EN 3955:2001 |
| DIN EN 3956-2002 | 航空航天系列.银基合金AG-B14001 (AgCu42Ni2).铜焊用填充金属.金属线; 德文版本 EN 3956:2001 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing, wire; German version EN 3956:2001 |
| DIN EN 3957-2002 | 航空航天系列.银基合金AG-B14001 (AgCu42Ni2).铜焊用填充金属.粉末和糊料; 德文版本 EN 3957:2001 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing, powder or paste; German version EN 3957:2001 |
| DIN EN 3958-2002 | 航空航天系列.银基合金AG-B14001 (AgCu42Ni2).铜焊用填充金属.轧制箔片 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing, rolled foil; German version EN 3958:2001 |
| DIN EN 3959-2002 | 航空航天系列.钴基合金CO-B41601(CoCr19Ni17Si8W4).铜焊用填充金属.粉末和糊料; 德文版本 EN 3959:2001 | Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing, powder or paste; German version EN 3959:2001 |
| DIN EN 3960-2002 | 航空航天系列.金基合金AU-B40001 (AuNi18).铜焊用填充金属.粉末和糊料; 德文版本 EN 3960:2001 | Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing, powder or paste; German version EN 3960:2001 |
| DIN EN 3961-2002 | 航空航天系列.金基合金AU-B40001.铜焊填充金属:轧制箔片; 德文版本 EN 3961:2001 | Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing, rolled foil; German version EN 3961:2001 |
| DIN EN 3962-2002 | 航空航天系列.金基合金AU-B40001.铜焊填充金属:线材; 德文版本 EN 3962:2001 | Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing, wire; German version EN 3962:2001 |
| DIN EN 3963-2002 | 航空航天系列.铜CU-BU9001.铜焊填充金属:轧制箔片; 德文版本 EN 3963:2001 | Aerospace series - Copper CU-BU9001 - Filler metal for brazing, rolled foil; German version EN 3963:2001 |
| DIN EN 3964-2002 | 航空航天系列.铜CU-BU9001.铜焊填充金属、线材; 德文版本 EN 3964:2001 | Aerospace series - Copper CU-BU9001 - Filler metal for brazing, wire; German version EN 3964:2001 |
| DIN EN 3965-2002 | 航空航天系列.钛合金TI-B17001.铜焊填充金属:轧制箔片; 德文版本 EN 3965:2001 | Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing, rolled foil; German version EN 3965:2001 |
| DIN EN 3969-2007 | 航空航天系列.FE-PL1507(40CrMoV12)型钢.气体融化.退火.铸件坯料.a或D≤350 mm | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D ≤ 350 mm; German and English version EN 3969:2006 |
| DIN EN 3971-2007 | 航空航天系列.FE-PL1507(40CrMoV12)型钢.消耗电极再熔炼.退火.锻件坯料.a或D≤350mm | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm; German and English version EN 3971:2006 |
| DIN EN 3972-2007 | 航空航天系列.FE-PL1507(40CrMoV12)钢.消耗电极再熔炼.硬化调质钢.机加工用棒材.D≤50mm.1250MPa≤R≤1400M | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - D ≤ 50 mm - 1250 MPa ≤ R ≤ 1400 MPa; German and English version EN 3972:2006 |
| DIN EN 3973-2007 | 航空航天系列.FE-CM3801(X5CrNiCuNb16-4)型钢.均匀分布、溶解处理和沉淀淬火.熔模铸造.D<(指数)e>≤50mm.R< | Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - D<(Index)e> 50 mm - R<(Index)m> 1030 MPa; German and English version EN 3973:2006 |
| DIN EN 3976-2007 | 航空航天系列.钛和钛合金.试验方法.测定氢含量的化学分析. | Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content; German and English version EN 3976:2006 |
| DIN EN 3979-2006 | 航空航天系列.铝合金AL-P8090-O2.超塑性成型(SPF)用薄板.0.8mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm; German and English version EN 3979:2005 |
| DIN EN 3997-2007 | 航空航天系列.AL-P2024-T3型铝合金.0.4mm≤a≤6mm的薄板材和带材 | Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip 0,4 mm a 6 mm; German and English version EN 3997:2007 |
| DIN EN 3998-2007 | 航空航天系列.AL-P2024-T4或T42型铝合金.0.3mm≤a≤6mm的薄板材和带材 | Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm a 6 mm; German and English version EN 3998:2007 |
| DIN EN 3999-2007 | 航空航天系列.AL-P2024-T351型铝合金.改进化学铣削性能的镀铝薄板材和带材.1.6mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6 mm a 6 mm; German and English version EN 3999:2007 |
| DIN EN 4000-2003 | 航空航天系列.金属材料.金属半成品尺寸标准的起草和说明规则 | Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products; German and English version EN 4000:2001 |
| DIN EN 4001-2007 | 航空航天系列.AL-P2024-T351型铝合金.改进的化学铣削性能1.6mm≤a≤6mm的镀铝薄板材和带材 | Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm (kursiv)a 6 mm; German and English version EN 4001:2007 |
| DIN EN 4002-2007 | 航空航天系列.AL-P2219-T81型铝合金.薄板材和带材.0.5mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2219-T81 - Sheet and strip 0,5 mm a 6 mm; German and English version EN 4002:2007 |
| DIN EN 4003-2007 | 航空航天系列.AL-P2219-T87型铝合金.0.5mm≤a≤6mm的薄板材和带材. | Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm ≤ a ≤ 6 mm; German and English version EN 4003:2006 |
| DIN EN 4004-2007 | 航空航天系列.AL-P3103-H16型铝合金.0.4mm≤a≤6mm的薄板材和带材 | Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm (kursiv)a 6 mm; German and English version EN 4004:2007 |
| DIN EN 4005-2007 | 航空航天系列.AL-P5052-0型铝合金.0.3mm≤a≤6mm的薄板材和带材 | Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm (kursiv)a 6 mm; German and English version EN 4005:2007 |
| DIN EN 4006-2007 | 航空航天系列.AL-P6082-T4或T42型铝合金.0.4mm≤a≤6mm的薄板材和带材 | Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm a 6 mm; German and English version EN 4006:2007 |
| DIN EN 4007-2006 | 航空航天系列.铝合金AL-P6082.T6或T62.薄板材和带材.0.4mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 4007:2005 |
| DIN EN 4008-008-2007 | 航空航天系列.电气和光学连接元件.压接工具和相关附件.第008部分:M22520/7-01型压接工具用调位器.产品标准 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008: Positioner for crimping tool M22520/7-01 - Product standard; German and English version EN 4008-008:2006 |
| DIN EN 4008-011-2007 | 航空航天系列.电气和光学连接元件.压接工具和相关附件.第011部分:M22520/2-01型压接工具用调位器.产品标准 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 011: Positioner for crimping tool M22520/2-01 - Product standard; German and English version EN 4008-011:2006 |
| DIN EN 4008-012-2007 | 航空航天系列.电气和光学连接元件.压接工具和相关附件.第012部分:M22520/2-01型压接工具用调位器.产品标准 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 012: Positioner for crimping tool M22520/2-01 - Product standard; German and English version EN 4008-012:2006 |
| DIN EN 4008-013-2007 | 航空航天系列.电气和光学连接元件.压接工具和相关附件.第013部分:M22520/2-01型压接工具用调位器.产品标准 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 013: Positioner for crimping tool M22520/2-01 - Product standard; German and English version EN 4008-013:2006 |
| DIN EN 4008-014-2007 | 航空航天系列.电气和光学连接元件.压接工具和相关附件.第014部分:M22520/31-01型压接工具用调位器.产品标准 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 014: Turret for crimping tool M22520/31-01 - Product standard; German and English version EN 4008-014:2006 |
| DIN EN 4009-2006 | 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制带安全锁线孔、减径柄、长螺纹的双六角头螺栓.等级:1 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4009:2004 |
| DIN EN 4011-2006 | 航空航天系列.十二角头自锁紧镀银耐热镍基合金NI-PH2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/600 °C | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4011:2004 |
| DIN EN 4012-2006 | 航空航天系列.NI-PH2601(铬镍铁合金718)型耐热镍基合金制,镀MoS<上标2>的自锁、十二角螺母.分类:1550MPa(室 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS coated - Classification: 1550 MPa (at ambient temperature)/425 °C; German and English version EN 4012:2004 |
| DIN EN 4013-2006 | 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制镀银的自锁紧带柄螺母.等级:1550MPa(室温)/600℃ | Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4013:2004 |
| DIN EN 4014-2006 | 航空航天系列.厚壁自锁镶嵌件.设计标准 | Aerospace series - Inserts, thickwall, self-locking - Design standard; German and English version EN 4014:2004 |
| DIN EN 4015-2006 | 航空航天系列.厚壁自锁镶嵌件.安装和拆卸程序 | Aerospace series - Inserts, thickwall, self-locking - Installation and removal procedure; German and English version EN 4015:2004 |
| DIN EN 4017-2002 | 航空航天系列.钛合金管连接件 8°30'.90°弯头: 德文版本 EN 4017:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°; German version EN 4017:2001 |
| DIN EN 4018-2002 | 航空航天系列.钛合金管连接件 8°30'.带止推金属丝螺母的 90°弯头; 德文版本 EN 4018:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbow 90°, with thrust wire nut; German version EN 4018:2001 |
| DIN EN 4019-2002 | 航空航天系列.钛合金管连接件 8°30'.焊接端的 90°弯头; 德文版本 EN 4019:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, welded end; German version EN 4019:2001 |
| DIN EN 4020-2006 | 航空航天系列. 8°30'钛合金管接头.带推进线螺母的90°弯头焊接端 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, welded end with thrust wire nut; German and English version EN 4020:2001 |
| DIN EN 4021-2002 | 航空航天系列.钛合金管连接件 8°30'.闷头 90°弯头; 德文版本 EN 4021:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, bulkhead; German version EN 4021:2001 |
| DIN EN 4022-2002 | 航空航天系列.钛合金管连接件 8°30'.闷头、焊接端的 90°弯头; 德文版本 EN 4022:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, bulkhead, welded end; German version EN 4022:2001 |
| DIN EN 4023-2002 | 航空航天系列.钛合金管连接件 8°30'.45°弯头: 德文版本 EN 4023:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 45°; German version EN 4023:2001 |
| DIN EN 4024-2002 | 航空航天系列.钛合金管连接件 8°30'.带止推金属丝螺母的焊接端 45°弯头; 德文版本 EN 4024:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 45°, welded end with thrust wire nut; German version EN 4024:2001 |
| DIN EN 4025-2006 | 航空航天系列. 8°30'钛合金管接头.45°凸檐弯头 | Aerospace series - Pipe coupling 8°30′ in titanium alloy - Elbows 45°, bulkhead; German and English version EN 4025:2001 |
| DIN EN 4026-2002 | 航空航天系列.钛合金管连接件 8°30'.三通管; 德文版本 EN 4026:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees; German version EN 4026:2001 |
| DIN EN 4027-2002 | 航空航天系列.钛合金管连接件 8°30'.带止推金属丝螺母的三通管分支; 德文版本 EN 4027:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, branch, with thrust wire nut; German version EN 4027:2001 |
| DIN EN 4028-2006 | 航空航天系列.8°30'钛合金管接头.端部带推进线螺母的三通 | Aerospace series - Pipe coupling 8°30′ in titanium alloy - Tees with thrust wire nut on run; German and English version EN 4028:2001 |
| DIN EN 4029-2002 | 航空航天系列.钛合金管连接件 8°30'.三通管闷头分支; 德文版本 EN 4029:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, bulkhead branch; German version EN 4029:2001 |
| DIN EN 4030-2002 | 航空航天系列.钛合金管连接件 8°30'.使用的三通管闷头; 德文版本 EN 4030:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, bulkhead on run; German version EN 4030:2001 |
| DIN EN 4031-2002 | 航空航天系列.钛合金管连接件 8°30'.焊接金属箍用螺母; 德文版本 EN 4031:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Nuts for welded ferrule; German version EN 4031:2001 |
| DIN EN 4032-2004 | 航空航天系列.钛合金管连接件8°30'.止推金属丝 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Thrust wires; German and English version EN 4032:2001 + AC:2003 |
| DIN EN 4035-2006 | 航空航天系列.减小内部径向间隙和带螺纹钛合金杆耐腐蚀钢可调自动对心双列球轴承的杆端.尺寸和载荷 | Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads; German and English version EN 4035:2006 |
| DIN EN 4036-2007 | 航空航天系列.减小内部径向间隙的耐腐蚀钢中可调自动对心双列滚球轴承和螺纹柄的杆端.尺寸和载荷 | Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads; German and English version EN 4036:2006 |
| DIN EN 4040-2006 | 航空航天.宽内环的带自润滑内衬的耐蚀钢制关节轴承.室温高负荷.尺寸和负荷 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads; German and English version EN 4040:2006 |
| DIN EN 4041-2007 | 航空航天系列.机架滚动轴承.带扩展内圈和法兰直排轴套的防腐蚀钢中刚性单列滚珠轴承.尺寸和负荷 | Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush - Dimensions and loads; German and English version EN 4041:2006 |
| DIN EN 4045-2003 | 航空航天系列.耐热合金无缝小直径管.管径0.6 mm～ 2 mm.尺寸 | Aerospace series - Capillary tubes, seamless, in heat resisting alloys - Diameter 0,6 mm D 2 mm; Dimensions; German and English version EN 4045:2001 |
| DIN EN 4047-2006 | 航空航天系列.镀银耐高温镍基合金NI-PH2601(铬镍铁合金718)自锁螺母.等级:1 550 MPa(室温)/600℃.技术规范 | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600 °C - Technical specification; German and English version EN 4047:2004 |
| DIN EN 4048-2006 | 航空航天系列.NI-PH2601(铬镍铁合金718)耐热镍基合金制MJ螺纹自锁紧的镀银螺母.分类:1550MPa(室温)/425 ℃ | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1550 MPa (at ambient temperature) / 425 °C - Technical specification; German and English version EN 4048:2004 |
| DIN EN 4049-002-2007 | 航空航天系列.热电偶延伸电缆.工作温度为-65℃～260℃.第002部分:通则 | Aerospace series - Thermocouple extension cable - Operating temperatures between -65 °C to 260 °C - Part 002: General; German and English version EN 4049-002:2005 |
| DIN EN 4051-2003 | 航空航天系列.钛合金TI-P64001、球形、60度管连接器.油口接头 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Port connection; German and English version EN 4051:2002 |
| DIN EN 4054-2006 | 航空航天系列.管连接件、活动法兰和密封件.氟烃橡胶密封件和铝合金附件.技术规范 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification; German and English version EN 4054:2004 |
| DIN EN 4057-201-2007 | 航空航天系列.电缆线用电缆结.试验方法.第201部分:目视检查 | Aerospace series - Cable ties for harnesses - Test methods - Part 201: Visual examination; German and English version EN 4057-201:2005 |
| DIN EN 4057-202-2007 | 航空航天系列.导线电缆扎匝.试验方法.第202部分:质量和尺寸检验 | Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions; German and English version EN 4057-202:2005 |
| DIN EN 4057-303-2007 | 航空航天系列.导线电缆扎匝.试验方法.第303部分:防液体侵蚀 | Aerospace series - Cable ties for harnesses - Test methods - Part 303: Resistance to fluids; German and English version EN 4057-303:2005 |
| DIN EN 4057-305-2007 | 航空航天系列.导线电缆扎匝.试验方法.第305部分:色牢度 | Aerospace series - Cable ties for harnesses - Test methods - Part 305: Colour fastness; German and English version EN 4057-305:2005 |
| DIN EN 4058-2003 | 航空航天系列.钛和钛合金焊接用焊条和充填金属丝.直径.0.5 mm～ 5.0 mm.尺寸 | Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm D 5,0 mm; Dimensions; German and English version EN 4058:2001 |
| DIN EN 4059-2002 | 航空航天系列.钢焊接用焊条和焊丝.直径0.5-5.0mm.尺寸 | Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm D 5,0 mm; Dimensions; German and English version EN 4059:2001 |
| DIN EN 4060-2003 | 航空航天系列.耐热合金焊接用焊条和充填金属丝.直径0.5 mm～ 5.0 mm.尺寸 | Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm D 5,0 mm; Dimensions; German and English version EN 4060:2001 |
| DIN EN 4069-1996 | 航空航天系列.钝化耐高温钢制小板手开口度平面六角螺母.等级:600MPa(室温)/650℃ | Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C; German version EN 4069:1996 |
| DIN EN 4085-2002 | 航空航天系列.镍基合金NI-B40002 (NiSi4B2).硬钎焊填充金属.非晶态箔 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing; Amorphous foil; German version EN 4085:2001 |
| DIN EN 4098-2007 | 航空航天系列.FE-PL1507(40CrMoV12)型钢.重熔、淬火并回火锻件.D<指数e>≤50mm、1250MPa≤R<指数m>≤1400MP | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings D<(Index)e> 50 mm, 1250 MPa R<(Index)m> 1400 MPa; German and English version EN 4098:2007 |
| DIN EN 4099-2005 | 航空航天系列.铝合金AL-P2219-T6或T62.涂覆薄板材和带材.0.5 mm a 6 mm | Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm a 6 mm; German and English version EN 4099:2005 |
| DIN EN 4100-2006 | 航空航天系列.铝合金AL-P2219-T6或T62.薄板材和带材.0.5mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm a 6 mm; German and English version EN 4100:2005 |
| DIN EN 4101-2006 | 航空航天系列.铝合金AL-P2024-T4.改善拉伸变形能力的薄板材和带材.0.4mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm a 6 mm; German and English version EN 4101:2005 |
| DIN EN 4102-2006 | 航空航天系列.铝合金AL-P2219.T81.覆层板材及带材.0.5mm≥a≥6mm;德文和英文版本EN 4102-2005 | Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm a 6 mm; German and English version EN 4102:2005 |
| DIN EN 4103-2004 | 航空航天系列.镍基合金NI-B40002.铜焊用填充金属、硼化箔 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing, Borided foil; German and English version EN 4103:2001 |
| DIN EN 4104-2003 | 航空航天系列.NI-B40002型镍合金.铜焊接用填充金属粉或膏 | Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing; Powder or paste; German and English version EN 4102:2001 |
| DIN EN 4105-1998 | 航天和航空系列.NI-B40002 (NiSi4B2)镍基合金.硬钎焊用金属填料.带形焊料 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape; German version EN 4105:1998 |
| DIN EN 4111-2007 | 航空航天系列.管件的花键套筒扳手.技术规范 | Aerospace series - Wrenches, splined, socket for pipe fittings - Technical specification; German and English version EN 4111:2006 |
| DIN EN 4113-2003 | 航空航天系列.带橡胶垫圈的钝化耐腐蚀钢环状夹具("P" 型).尺寸和质量 | Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses; German and English version EN 4113:2001 |
| DIN EN 4114-2003 | 航空航天系列.带橡胶垫圈的铝合金环状夹具("P" 型).尺寸和质量 | Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses; German and English version EN 4114:2001 |
| DIN EN 4115-2003 | 航空航天系列.夹具橡胶垫.尺寸和重量 | Aerospace series - Cushion, rubber, for clamps - Dimensions, masses; German and English version EN 4115:2001 |
| DIN EN 4116-2006 | 航空航天系列.耐热钢FE-PA2601 (A286)制自锁、螺纹镀银的六角螺母.等级:1100MPa(室温)/425℃ | Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) / 425 °C; German and English version EN 4116:2004 |
| DIN EN 4117-2006 | 航空航天系列.十二角头自锁紧螺纹镀银的耐热镍基合金NI-PH2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/ 60 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1550 MPa (at ambient temperature) / 600 °C; German and English version EN 4117:2004 |
| DIN EN 4118-2006 | 航空航天系列.螺纹镀银的耐热钢FE-PA2601 (A286)制双六角头自锁螺母.等级：1100MPa(室温)/ 650 °C | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 4118:2004 |
| DIN EN 4119-2006 | 航空航天系列.螺纹上镀银的耐热钢FE-PA2601 (A286)制深沉头孔自锁紧十二角螺母.等级:1100 MPa(室温)/650 ° | Aerospace series - Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 4119:2004 |
| DIN EN 4121-2006 | 航空航天系列.螺纹上镀银的耐热钢FE-PA2601(A286)制自锁紧、锯齿状带柄螺母.等级:1100MPa(环境温度)/650℃ | Aerospace series - Shank nuts, serrated, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 4121:2004 |
| DIN EN 4122-2006 | 航空航天系列.螺纹镀银的耐热钢FE-PA2601(A286)制自锁紧带柄螺母.等级:1100MPa(室温)/650℃ | Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 4122:2004 |
| DIN EN 4123-2006 | 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制镀银的自锁紧带柄螺母.等级:1550MPa(室温)/600℃ | Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4123:2004 |
| DIN EN 4124-2006 | 航空航天系列.耐热镍基合金NI-PH1302(沃斯帕洛尹合金)制60°连接模镀银的自锁紧带柄螺母.等级:1210MPa(室温 | Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1210 MPa (at ambient temperature) / 730 °C; German and English version EN 4124:2004 |
| DIN EN 4158-2007 | 航空航天系列.涂料和清漆.传导层表面电阻的测量用试验方法 | Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers; German and English version EN 4158:2006 |
| DIN EN 4165-012-2007 | 航空航天系列.矩形模块电连接器.连续工作温度175℃.第012部分:系列3的2和4模块的法兰安装插座.产品标准 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard; German and English version EN 4165-012:2005 |
| DIN EN 4165-013-2007 | 航空航天系列.矩形模块电连接器.连续工作温度175℃.第013部分:系列2和系列3的连接器用2和4模块的电缆夹具. | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard; German and English version EN 4165-013:2005 |
| DIN EN 4165-014-2007 | 航空航天系列.矩形模块电连接器.连续工作温度175℃.第014部分:系列2和系列3的连接器用2和4模块的屏蔽附件. | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 - Product standard; German and English version EN 4165-014:2005 |
| DIN EN 4165-015-2007 | 航空航天系列.矩形模块电连接器.连续工作温度175℃.第015部分:附加圆形烟囱(每1模块槽).产品标准 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 015: Round chimney for accessory (1 per module cavity) - Product standard; German and English version EN 4165-015:2005 |
| DIN EN 4165-016-2007 | 航空航天系列.矩形模块电连接器.连续工作温度175℃.第016部分:双圆形烟囱(每1个2模块槽).产品标准 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 016: Double oval chimney for accessory (1 per 2 modules) - Product standard; German and English version EN 4165-016:2005 |
| DIN EN 4165-017-2007 | 航空航天系列.矩形模块电连接器.连续工作温度175℃.第017部分:附加空烟囱(每1模块槽).产品标准 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 017: Blank chimney for accessory (1 per module cavity) - Product standard; German and English version EN 4165-017:2005 |
| DIN EN 4165-022-2007 | 航空航天系列.矩形模块电连接器.连续工作温度175℃.第022部分:模块去除的插入/取出工具.产品标准 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard; German and English version EN 4165-022:2005 |
| DIN EN 4166-2006 | 航空航天系列.三部分弹簧张力夹具.聚四氟乙烯轴衬 | Aerospace series - Clips, spring tension, three parts - PTFE bushes; German and English version EN 4166:2004 |
| DIN EN 4167-2006 | 航空航天系列.三部分弹簧张力夹具.耐热钢FE-PA2601(A286)制内夹具 | Aerospace series - Clips, spring tension, three parts - Inner clips in heat resisting steel FE-PA2601 (A286); German and English version EN 4167:2004 |
| DIN EN 4168-2006 | 航空航天系列.三部分弹簧张力夹具.耐热钢FE-PA2601(A286)制外夹具 | Aerospace series - Clips, spring tension, three parts - Outer clips in heat resisting steel FE-PA2601 (A286); German and English version EN 4168:2004 |
| DIN EN 4172-2006 | 航空航天系列.紧公差TI-P64001阳极电镀的米制钛合金杆沉头、凹头锁紧螺栓.分类:1100 MPa / 315 °C（周围温 | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4172:2006 |
| DIN EN 4173-2006 | 航空航天系列.紧公差TI-P64001阳极电镀的米制钛合金杆１００°正常头、凹头锁紧螺栓.分类:1100 MPa / 315 | Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4173:2006 |
| DIN EN 4174-2006 | 航天航空系列.阳极电镀或铬酸盐处理铝合金2024米制系列、连接模压锁紧凹头紧固件 | Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series; German and English version EN 4174:2006 |
| DIN EN 4175-2006 | 航天航空系列.TI-P99002型钛合金米制系列、法兰连接模压锁紧切变型垫圈 | Aerospace series - Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series; German and English version EN 4175:2005 |
| DIN EN 4176-2007 | 航空航天系列.阳极电镀或热镀铝法的TI-P6400钛合金紧公差拉紧/剪切式100°埋头标准头钉紧螺栓.TI-P99002钛 | Aerospace series - Lockbolts, 100° countersunk normal head or protruding head, tension-/sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification; German and English version EN 4176:2005 |
| DIN EN 4179-2007 | 航空航天系列.无损检验人员的资格和认可 | Aerospace series - Qualification and approval of personnel for non-destructive testing; German and English version EN 4179:2005 |
| DIN EN 4180-2003 | 航空航天系列.流体用钛及钛合金圆管.宽公差.直径4mm ≤ D ≤ 40mm.尺寸 | Aerospace series - Circular tubes, for fluids in titanium and titanium alloys - Wide tolerances; Diameter 4 mm D 40 mm; Dimensions; German and English version EN 4180:2001 |
| DIN EN 4182-2002 | 航空航天系列.钛合金管连接件 8°30'.异径三通管; 德文版本 EN 4182:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, reduced; German version EN 4182:2001 |
| DIN EN 4183-2002 | 航空航天系列.钛合金管连接件 8°30'.焊接端 90°弯头; 德文版本 EN 4183:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, welded ends; German version EN 4183:2001 |
| DIN EN 4184-2002 | 航空航天系列.钛合金管连接件 8°30'.焊接端 45°弯头; 德文版本 EN 4184:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 45°, welded ends; German version EN 4184:2001 |
| DIN EN 4185-2002 | 航空航天系列.钛合金管连接件 8°30'.使用的三通管长闷头; 德文版本 EN 4185:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, bulkhead on run, long; German version EN 4185:2001 |
| DIN EN 4186-2002 | 航空航天系列.钛合金管连接件 8°30'.十字形管接头; 德文版本 EN 4186:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, cross; German version EN 4186:2001 |
| DIN EN 4187-2006 | 航空航天系列.8°30'钛合金管接头.90°闷头长弯管 | Aerospace series - Pipe coupling 8°30′ in titanium alloy - Elbows 90° bulkhead, long; German and English version EN 4187:2001 |
| DIN EN 4188-2006 | 航空航天系列.钛合金管连接件8°30'.90°弯头长闷头焊接端头 | Aerospace series - Pipe coupling 8°30′ in titanium alloy - Elbows 90° bulkhead, long, welded end; German and English version EN 4188:2001 |
| DIN EN 4189-2002 | 航空航天系列.钛合金管连接件 8°30'.三通管长闷头分支; 德文版本 EN 4189:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, bulkhead branch, long; German version EN 4189:2001 |
| DIN EN 4190-2002 | 航空航天系列.钛合金管连接件 8°30'.使用的带止推金属丝的异径三通管; 德文版本 EN 4190:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, reduced, with thrust nut on run; German version EN 4190:2001 |
| DIN EN 4191-2002 | 航空航天系列.钛合金管连接件 8°30'.异径三通管长闷头分支; 德文版本 EN 4191:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, reduced, bulkhead branch, long; German version EN 4191:2001 |
| DIN EN 4192-2002 | 航空航天系列.钛合金管连接件 8°30'.异径三通管闷头分支; 德文版本 EN 4192:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, reduced, bulkhead branch; German version EN 4192:2001 |
| DIN EN 4193-2002 | 航空航天系列.钛合金8°30'管连接件.异径延长闷头三通管; 德文版本 EN 4193:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, reduced, bulkhead on long run; German version EN 4193:2001 |
| DIN EN 4194-2002 | 航空航天系列.钛合金8°30'管连接件.异径闷头三通管; 德文版本 EN 4194:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, reduced, bulkhead; German version EN 4194:2001 |
| DIN EN 4198-2007 | 航空航天系列.耐腐蚀钢带自润滑衬垫和螺纹柄的可调自动对心滑动轴承的杆端.尺寸和载荷 | Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads; German and English version EN 4198:2006 |
| DIN EN 4199-002-2007 | 航空航天系列.航空器用连接条.第002部分:产品标准索引 | Aerospace series - Bonding straps for aircraft - Part 002: Index of product standard; German and English version EN 4199-002:2006 |
| DIN EN 4199-006-2007 | 航空航天系列.航空器用连接带.第006部分:150℃以下镀锡或260℃以下镀镍连接带用圆形编织铜导体.产品标准 | Aerospace series - Bonding straps for aircraft - Part 006: Round braid copper conductors for bonding straps, tin plated up to 150 °C or nickel plated up to 260 °C - Product standard; German and English version EN 4199-006:2006 |
| DIN EN 4202-2005 | 航空航天系列.铝合金AL-P6082-T651.板材.6 mm a 25 mm | Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm a 25 mm; German and English version EN 4202:2005 |
| DIN EN 4203-2006 | 航空航天系列.铝合金AL-P8090-T89.板材.0.6mm≥a ≥6mm | Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm ≤ a ≤ 6 mm; German and English version EN 4203:2005 |
| DIN EN 4204-2006 | 航空航天系列.铝合金AL-P8090-T841.薄板材.0.6mm≥a ≥6mm | Aerospace series - Aluminium alloy AL-P8090-T841 - Sheet - 0,6 mm a 6 mm; German and English version EN 4204:2005 |
| DIN EN 4209-2005 | 航空航天系列.铝合金AL-P2219-T851.板材.6 mm a 50 mm | Aerospace series - Aluminium alloy AL-P2219-T851 - Plate - 6 mm a 50 mm; German and English version EN 4209:2005 |
| DIN EN 4211-2005 | 航空航天系列.铝合金AL-P2024-T42.涂覆板材.6 mm a 25 mm | Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm a 25 mm; German and English version EN 4211:2005 |
| DIN EN 4212-2005 | 航空航天系列.铝合金AL-P5086-H111.板材.6 mm a 80 mm | Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm a 80 mm; German and English version EN 4212:2005 |
| DIN EN 4213-2005 | 航空航天系列.铝合金AL-P6061-T651.板材.6 mm a 80 mm | Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm a 80 mm; German and English version EN 4213:2005 |
| DIN EN 4214-2005 | 航空航天系列.铝合金AL-P7010-T651.板材.6 mm a 20 mm | Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm a 20 mm; German and English version EN 4214:2005 |
| DIN EN 4215-2005 | 航空航天系列.铝合金AL-P7175-T651.板材.6 mm a 80 mm | Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm a 80 mm; German and English version EN 4215:2005 |
| DIN EN 4233-2002 | 航空航天系列.钛合金管连接件 8°30'.带螺纹的焊接管接头; 德文版本 EN 4233:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, welded, threaded; German version EN 4233:2001 |
| DIN EN 4234-2007 | 航空航天系列.蜗杆传动夹具.尺寸和质量 | Aerospace series - Clamps, worm drive - Dimensions, masses; German and English version EN 4234:2006 |
| DIN EN 4247-2006 | 航空航天系列.铝合金AL-P2024-T42.厚板材.6mm | Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm a 140 mm; German and English version EN 4247:2005 |
| DIN EN 4250-2002 | 航空航天系列.镍基合金NI-B41001 (NiSr19Si7B).硬钎焊填充金属.非晶态箔 | Aerospace series - Nickel base alloy NI-B41001 (NiSr19Si7B) - Filler metal for brazing, amorphous foil; German version EN 4250:2001 |
| DIN EN 4258-1998 | 航空航天系列.金属材料.标准化工作的一般组织.欧洲标准类型之间的联系及其应用 | Aerospace series - Metallic materials - General organization of standardization; links between types of EN standards and their use; German version EN 4258:1998 |
| DIN EN 4267-2003 | 航空航天系列.钛和钛合金圆棒材.管径6 mm～ 160 mm.尺寸 | Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm D 160 mm; Dimensions; German and English version EN 4267:2001 |
| DIN EN 4283-2006 | 航空航天系列.铝合金AL-P2219-T87.厚板材.6mm | Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm a 40 mm; German and English version EN 4283:2005 |
| DIN EN 4286-2006 | 航空航天系列.铝合金AL-P8090-T89.模锻件.a≤125mm | Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a ≤ 125 mm; German and English version EN 4286:2005 |
| DIN EN 4287-2006 | 航空航天系列.铝合金AL-P7010.锻坯 | Aerospace series - Aluminium alloy AL-P7010 - Forging stock; German and English version EN 4287:2005 |
| DIN EN 4291-2006 | 航空航天系列.铝合金AL-P8090.锻坯 | Aerospace series - Aluminium alloy AL-P8090 - Forging stock; German and English version EN 4291:2005 |
| DIN EN 4292-2006 | 航空航天系列.铝合金AL-R39002.锻坯 | Aerospace series - Aluminium alloy AL-R39002 - Forging stock; German and English version EN 4292:2005 |
| DIN EN 4303-2006 | 航空航天系列.(0.25 mm壁厚)钝化耐腐蚀钢制沉头拉力螺杆用管状套管 | Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness); German and English version EN 4303:2005 |
| DIN EN 4304-2007 | 航空航天系列.钝化防腐蚀钢制带埋头剪切螺钉用管状管套(内壁厚度0.２5mm) | Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness); German and English version EN 4304:2005 |
| DIN EN 4306-2007 | 航空航天系列.钝化防腐蚀钢制带埋头拉紧螺钉用套筒(0.50 mm 壁厚) | Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4306:2005 |
| DIN EN 4307-2007 | 航空航天系列.钝化防腐蚀钢制带埋头剪切螺钉用管状管套(内壁厚度0.5mm) | Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4307:2005 |
| DIN EN 4311-2007 | 航空航天系列.MoS<(指数)2>润滑耐高温和耐腐蚀钢的中长螺纹粗公差递减柄螺栓.等级:1100MPa(室温)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4311:2006 |
| DIN EN 4312-2007 | 航空和航天系列.钝化铝合金涂层耐腐蚀耐热中长螺纹粗公差递减柄螺栓.等级:1100MPa(室温下)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4312:2006 |
| DIN EN 4321-2006 | 航空航天系列.镀银耐热镍基合金NI-PH2601(铬镍铁合金718)制带安全锁线孔、减径柄、长螺纹的双六角头螺栓.等 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4321:2004 |
| DIN EN 4322-2006 | 航空航天系列.阳极氧化处理镀MoS<指数2>的TI-P64001制带安全锁线孔、减径柄、长螺纹的双六角头螺栓.强度等 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature): German and English version EN 4322:2004 |
| DIN EN 4323-2006 | 航空航天系列.钛合金TI-P64001制的六瓣凹槽、全杆螺纹、阳极氧化、镀MoS2的100°沉头螺钉.等级:900MPa(室温 | Aerospace series - Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Classification: 900 MPa (at ambient temperature)/350 °C; German and English version EN 4323:2004 |
| DIN EN 4324-2003 | 航空航天系列.铝合金AL-W42201.焊接填充金属.焊条 | Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding; Rod; German and English version EN 4324:2001 |
| DIN EN 4325-2002 | 航空航天系列.耐高温合金 NI-WH1302 (NiCr20Co13Mo4Ti3Al).焊接填充金属:线材和棒材; 德文版本 EN 4325:200 | Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding; Wire and rod; German version EN 4325:2001 |
| DIN EN 4326-2002 | 航空航天系列.耐高温合金铜-WH4102 (CoCr28W20Ni5V1).焊接填充金属:线材和棒材; 德文版本 EN 4326:2001 | Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding; Wire and rod; German version EN 4326:2001 |
| DIN EN 4327-2002 | 航空航天系列.耐高温合金铜CO-WH1401 (CoCr26Ni11W8).焊接填充金属:线材和棒材; 德文版本 EN 4327:2001 | Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding; Wire and rod; German version EN 4327:2001 |
| DIN EN 4328-2002 | 航空航天系列.钢FE-WM1601 (X18CrWNi13-3-2).焊接填充金属:线材和棒材; 德文版本 EN 4328:2002 | Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding; Wire and rod; German version EN 4328:2002 |
| DIN EN 4329-2002 | 航空航天系列.耐高温合金NI-WH0001 (NiCr20).焊接填充金属:线材和棒材; 德文版本 EN 4329:2001 | Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding; Wire and rod; German version EN 4329:2001 |
| DIN EN 4330-2002 | 航空航天系列.钢FE-WA4802 (X8CrNiMn27-22-2).焊接填充金属:线材和棒材; 德文版本 EN 4330:2002 | Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding; Wire and rod; German version EN 4330:2002 |
| DIN EN 4331-2002 | 航空航天系列.钢FE-WL1804 (25CrMnMo4-2-2).焊接填充金属:线材和棒材; 德文版本 EN 4331:2002 | Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding; Wire and rod; German version EN 4331:2002 |
| DIN EN 4332-2002 | 航空航天系列.钢FE-WL1805 (8CrMnMo12-4-9).焊接填充金属:线材和棒材; 德文版本 EN 4332:2002 | Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding; Wire and rod; German version EN 4332:2002 |
| DIN EN 4333-2002 | 航空航天系列.钢 FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2).焊接填充金属:线材和棒材; 德文版本 EN 4333:20 | Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding; Wire and rod; German version EN 4333:2002 |
| DIN EN 4334-2002 | 航空航天系列.钢 FE-WL1806 (15CrMnMoV5-4-9-3).焊接填充金属:线材和棒材; 德文版本 EN 4334:2002 | Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding; Wire and rod; German version EN 4334:2002 |
| DIN EN 4335-2002 | 航空航天系列.钢 FE-WA2602 (X4NiCrTiMoV26-15).焊料.焊丝和焊棒 | Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding; Wire and rod; German version EN 4335:2002 |
| DIN EN 4336-2002 | 航空航天系列.钢 FE-WA3801 (X4CrNiMn20-10-2).焊接填充金属:线材和棒材; 德文版本 EN 4336:2002 | Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding; Wire and rod; German version EN 4336:2002 |
| DIN EN 4337-2002 | 航空航天系列.耐高温合金 NI-WH8901 (NiCr16Ti3Mn2).焊接填充金属:线材和棒材; 德文版本 EN 4337:2001 | Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding; Wire and rod; German version EN 4337:2001 |
| DIN EN 4338-2002 | 航空航天系列.耐高温合金 NI-WH3902 (NiCr25Mo10C).焊接填充金属:线材和棒材; 德文版本 EN 4338:2001 | Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding; Wire and rod; German version EN 4338:2001 |
| DIN EN 4339-2002 | 航空航天系列.耐高温合金 CO-WH4002 (CoCr29W9).焊接填充金属:线材和棒材; 德文版本 EN 4339:2001 | Aerospace series - Heat resisting alloy CO-WH4002 (CoCr29W9) - Filler metal for welding; Wire and rod; German version EN 4339:2001 |
| DIN EN 4340-2002 | 航空航天系列.镁合金 MG-W68001.焊接填充金属:线材和棒材; 德文版本 EN 4340:2002 | Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding; Wire and rod; German version EN 4340:2002 |
| DIN EN 4341-2002 | 航空航天系列.铝合金 AL-W46431.焊接填充金属:线材和棒材; 德文版本 EN 4341:2001 | Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding; Wire and rod; German version EN 4341:2001 |
| DIN EN 4342-2002 | 航空航天系列.钛合金 TI-W99001.焊接填充金属:线材和棒材; 德文版本 EN 4342:2001 | Aerospace series - Titanium TI-W99001 - Filler metal for welding; Wire and rod; German version EN 4342:2001 |
| DIN EN 4343-2002 | 航空航天系列.钢 FE-WM1001 (X13Cr12).焊接填充金属:线材和棒材; 德文版本 EN 4343:2002 | Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding; Wire and rod; German version EN 4343:2002 |
| DIN EN 4344-2002 | 航空航天系列.钢 FE-WM10022 (X13Cr13).焊接填充金属:线材和棒材; 德文版本 EN 4344:2001 | Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding; Wire and rod; German version EN 4344:2001 |
| DIN EN 4352-2006 | 航空航天系列.镀MoS2的耐热镍基合金NI-PH2601(铬镍铁合金 718)制带安全锁线孔、减径柄、长螺纹的双六角头螺 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated - Classification: 1550 MPa (at ambient temperature) /425 °C; German and English version EN 4352:2004 |
| DIN EN 4382-2007 | 航空航天系列.NI-PH3601(NiCr22Mo9Nb)型耐热镍合金.热溶处理.液压用无缝合金管.D≤50mm和a≤3mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated - Seamless tubes - For hydraulic application - D ≤ 50 mm, a ≤ 3 mm; German and English version EN 4382:2006 |
| DIN EN 4383-2007 | 航空航天系列.NI-CH2601(NiCr19Fe19Nb5Mo3)型耐热镍合金.非热处理的.再熔坯料 | Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock; German and English version EN 4383:2006 |
| DIN EN 4384-2007 | 航空航天系列.NI-CH1303(NiCo20Cr20Mo5Ti2Al)型耐热合金.非热处理.再熔炼坯料 | Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock; German and English version EN 4384:2007 |
| DIN EN 4401-2006 | 航空航天系列.紧公差TI-P64001铝制有色覆层的米制钛合金杆沉头、凹头锁紧螺栓.分类:1100 MPa / 315 °C（周 | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4401:2006 |
| DIN EN 4402-2007 | 航空航天系列.米制有铝色涂层钛合金TI-P64001紧公差剪切式100°埋头标准钉锁紧螺栓.等级:1100 MPa (常温)/3 | Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4402:2006 |
| DIN EN 4406-2007 | 航空航天系列.颜料和清漆.双组分冷固化聚氨酯涂料.耐磨性 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane coating - Abrasion resistant; German and English version EN 4406:2006 |
| DIN EN 4408-001-2007 | 航空航天系列.技术图.复合材料制造部件的表示法.第1部分:一般要求 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules; German and English version EN 4408-001:2005 |
| DIN EN 4408-002-2007 | 航空航天系列.技术图.复合材料制造部件的表示法.第2部分:层压部件 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts; German and English version EN 4408-002:2005 |
| DIN EN 4408-003-2007 | 航空航天系列.技术图.复合材料制造部件的表示法.第3部分:包括芯材的部件 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials; German and English version EN 4408-003:2005 |
| DIN EN 4408-004-2007 | 航空航天系列.技术图.复合材料制造部件的表示法.第4部分:缠绕产品 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 4: Items obtained by winding; German and English version EN 4408-004:2005 |
| DIN EN 4408-005-2007 | 航空航天系列.技术图.复合材料制造部件的表示法.第5部分:缝隙 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams; German and English version EN 4408-005:2005 |
| DIN EN 4408-006-2007 | 航空航天系列.技术图.复合材料制造部件的表示法.第6部分:预先成型件 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms; German and English version EN 4408-006:2005 |
| DIN EN 4415-2007 | 航空航天系列.非金属材料.纺织材料.带机织物.技术规范 | Aerospace series - Non-metallic materials - Textiles - Narrow woven fabrics - Technical specification; German and English version EN 4415:2006 |
| DIN EN 4416-2007 | 航空航天系列.非金属材料.纺织材料.宽机织物.技术规范 | Aerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification; German and English version EN 4416:2006 |
| DIN EN 4420-2004 | 航空航天系列.合金钢FE-PA3903制有弹簧张力的卡箍 | Aerospace series - Clips, spring tension, in alloy steel FE-PA3903; German and English version EN 4420:2003 |
| DIN EN 4424-2007 | 航空和航天.有约束力的单叉螺纹柄:1.5旋进深度×钛合金螺纹直径的可调叉形杆端.尺寸和负载 | Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys - Dimensions and loads; German and English version EN 4424:2006 |
| DIN EN 4425-2007 | 航空航天系列.飞行操纵杆用耐腐蚀钢有耳垫圈 | Aerospace series - Washers, tab in corrosion resisting steel for flight control rods - Dimensions; German and English version EN 4425:2006 |
| DIN EN 4429-2007 | 航空航天系列.纺织材料.带机织物测试.弯曲度测定 | Aerospace series - Textiles - Testing of narrow woven fabrics - Determination of warp bow; German and English version EN 4429:2006 |
| DIN EN 4434-2006 | 航空航天系列.电缆的铜和铜合金轻型导体.产品质量（正常和紧公差） | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances); German and English version EN 4434:2005 |
| DIN EN 4449-2006 | 航空航天系列.铝合金AL-P7050-T76.薄板材.0.8mm≥a ≥6mm | Aerospace series - Aluminium alloy AL-P7050-T76 - Sheet - 0,8 mm a 6 mm; German and English version EN 4449:2005 |
| DIN EN 4450-2006 | 航空航天系列.铝合金AL-P7050-T762.带材.薄板材0.8mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm a 6 mm; German and English version EN 4450:2005 |
| DIN EN 4458-2006 | 航空航天系列.带耐腐钢制锯齿型锁环的MoS2涂层的TI-P64001型钛合金制MJ螺纹螺柱.强度分类:1100 MPa（周围环 | Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1100 MPa (at ambient temperature) - Technical specification; German and English version EN 4458:2005 |
| DIN EN 4459-2006 | 航空航天系列.钛合金TI-P64001制带锯齿型锁环的耐腐钢螺柱.设计标准 | Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Design standard; German and English version EN 4459:2005 |
| DIN EN 4460-2006 | 航空航天系列.钛合金TI-P64001制带锯齿型锁环的耐腐钢螺柱.安装和拆卸程序 | Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Installation and removal procedure; German and English version EN 4460:2005 |
| DIN EN 4461-2007 | 航空航天系列.钢 FE-PM1506 (X5CrNiMoAI13-8-2).真空感应熔炼和自耗电极再溶炼的.固溶处理和时效处理的.棒 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1 200 MPa; German and English version EN 4461:2007 |
| DIN EN 4462-2007 | 航空航天系列.钢 FE-PM1506 (X5CrNiMoAI13-8-2).真空感应熔炼和自耗电极再溶炼的.固溶处理和时效处理的.棒 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4662:2007 |
| DIN EN 4463-2007 | 航空航天系列.钢 FE-PM1506 (X5CrNiMoAI13-8-2).真空感应熔炼和自耗电极再溶炼的.固溶处理和时效处理的.棒 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4463:2007 |
| DIN EN 4464-2007 | 航空航天系列.FE-PM1506(X5CrNiMoAI13-8-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀处理.锻件.a | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - R<(Index)m> 1200 MPa; German and English version EN 4464:2007 |
| DIN EN 4465-2007 | 航空航天系列.FE-PM1506(X5CrNiMoAI13-8-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀处理.锻件.a | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4465:2007 |
| DIN EN 4466-2007 | 航空航天系列.FE-PM1506(X5CrNiMoAI13-8-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀处理.锻件.a | Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4466:2007 |
| DIN EN 4467-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀处理.棒材. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1200 MPa; German and English version EN 4467:2007 |
| DIN EN 4468-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀硬化.棒材. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Bar - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4468:2007 |
| DIN EN 4469-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀硬化.棒材. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Bar - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4469:2007 |
| DIN EN 4470-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀处理.锻件. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Forgings - a or D 150 mm - R<(Index)m> 1200 MPa; German and English version EN 4470:2007 |
| DIN EN 4471-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀硬化.锻件. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Forgings - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4471:2007 |
| DIN EN 4472-2007 | 航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀硬化.锻件. | Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Forgings - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4472:2007 |
| DIN EN 4494-2007 | 航空航天系列.不锈钢开口环 | Aerospace series - Rings, split, in stainless steel; German and English version EN 4494:2006 |
| DIN EN 4495-2007 | 航空和航天系列.钝化铝合金涂层阳极电镀钛合金短螺纹紧配合标准柄正十二头螺栓.等级:1100MPa(室温下)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4495:2006 |
| DIN EN 4496 Berichtigung 1-2007 | 航空航天系列.带有色热镀铝覆层阳极氧化的钛合金中短螺纹紧公差标准螺杆的100°标准沉头偏置十字凹槽螺钉. | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005, Corrigenda to DIN EN 4496:2006-08; German and English version EN 4496:2005/AC:2006 |
| DIN EN 4496-2006 | 航空航天系列.十字凹槽、紧公差标准杆、短螺纹、100标准埋头钛合金阳极铝覆层螺钉.分类:1100 MPa(环境温度) | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005 |
| DIN EN 4501-2007 | 航空航天系列.带有色热镀铝覆层阳极氧化的钛合金中短螺纹紧公差标准柄正六角头螺栓、米制系列.等级:1100MPa | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4501:2006 |
| DIN EN 4508-2007 | 航空航天系列.涂料和清漆.防滑涂层的试验方法.滑动摩擦性能的测定 | Aerospace series - Paints and varnishes - Test method for anti slip coatings - Determination of the sliding friction behaviour; German and English version EN 4508:2006 |
| DIN EN 4509-2007 | 航空航天系列.带有色热镀铝覆层阳极氧化的钛合金中螺纹延伸到螺头100°沉头偏置十字凹槽螺钉、米制系列.等 | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4509:2006 |
| DIN EN 4529-001-2007 | 航空航天系列.电气和光学连接元件.密封插头.第001部分:技术规范 | Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification; German and English version EN 4529-001:2006 |
| DIN EN 4529-002-2007 | 航空航天系列.电气和光学连接元件.密封插头.第002部分:产品标准的索引 | Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 002: Index of product standards; German and English version EN 4529-002:2006 |
| DIN EN 4529-003-2007 | 航空航天系列.电气和光学连接元件.密封插头.第003部分:T级.产品标准 | Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard; German and English version EN 4529-003:2006 |
| DIN EN 4549-2004 | 航空航天系列.耐热钢或耐热镍合金管连接件.焊接的连接件端.设计构造.英制系列 | Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series; German and English version EN 4549:2003 |
| DIN EN 4550-1-2004 | 航空航天系列.管道连接件37设计构造.英尺系列.第1部分:球形阳螺纹焊接端 | Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical; German and English version EN 4550-1:2003 |
| DIN EN 4550-2-2004 | 航空航天系列.管道连接件37设计构造.英制.第2部分:端口 | Aerospace series - Pipe coupling 37° - Design confirguration - Inch series - Part 2: Port ends; German and English version EN 4550-2:2003 |
| DIN EN 4550-3-2004 | 航空航天系列.管道连接件37设计构造.英制.第3部分:端口接头 | Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 3: Port connections; German and English version EN 4550-3:2003 |
| DIN EN 4550-4-2004 | 航空航天系列.管道连接件37设计构造.英制.第4部分:承口密封端 | Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 4: Female sealing ends; German and English version EN 4550-4:2003 |
| DIN EN 4551-2004 | 航空航天系列.耐热钢制管道连接件37转的螺套.英制系列 | Aerospace series - Pipe couplings, 37°, in heat resisting steel - Swivel nuts - Inch series; German and English version EN 4551:2003 |
| DIN EN 4552-2004 | 航空航天系列.耐热钢制37球面管子接头.焊接端直螺纹接头.英制系列 | Aerospace series - Pipe coupling, 37°, spherical, in heat resisting steel - Straight nipples, welded end - Inch series; German and English version EN 4552:2003 |
| DIN EN 4553-2004 | 航空航天系列.耐热钢制37球面管子接头.焊接端90弯管螺纹接头.英制系列 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Elbow 90° nipples, welded end - Inch series; German and English version EN 4553:2003 |
| DIN EN 4554-2004 | 航空航天系列.耐热钢制37球面管子接头.加螺纹直活管节.英制系列 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight unions, threaded - Inch series; German and English version EN 4554:2003 |
| DIN EN 4555-2004 | 航空航天系列.耐热钢制37球面管子接头.焊接端套圈.英制系列 | Aerospace series - Pipe coupling 37°, in heat resisting steel - Ferrules, welded end - Inch series; German and English version EN 4555:2003 |
| DIN EN 4556-2004 | 航空航天系列.耐热钢制37球面管子接头.帽组件.英制系列 | Aerospace series - Pipe coupling 37°, in heat resisting steel - Cap assemblies - Inch series; German and English version EN 4556:2003 |
| DIN EN 4557-2004 | 航空航天系列.耐热钢制37球面管子接头.焊接端T形螺纹接头.英制系列 | Aerospace series - Pipe couplings, 37°, spherical, in heat resisting steel - Tees nipples, welded end - Inch series; German and English version EN 4557:2003 |
| DIN EN 4560-2004 | 航空航天系列.21000 kPa及以下的37球面管子螺纹.英制系列.技术规范 | Aerospace series - Pipe coupling 37° spherical, up to 21000 kPa - Inch series - Technical specification; German and English version EN 4560:2003 |
| DIN EN 4561-2004 | 航空航天系列.耐热钢制焊接管子接头.90弯管.英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90° - Inch series; German and English version EN 4561:2003 |
| DIN EN 4562-2004 | 航空航天系列.耐热钢制焊接管子接头.异径管.英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series; German and English version EN 4562:2003 |
| DIN EN 4563-2004 | 航空航天系列.耐热钢制焊接管子接头.三通.英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series; German and English version EN 4563:2003 |
| DIN EN 4585-2004 | 航空航天系列.弹簧拉伸卡箍.技术规范 | Aerospace series - Clips, spring tension - Technical specification; German and English version EN 4585:2003 |
| DIN EN 4588-2007 | 航空航天系列.涂料和清漆.防滑双组分冷加工聚氨酯涂料 | Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip; German and English version EN 4588:2007 |
| DIN EN 4590-2007 | 航空航天系列.耐腐蚀钢制钝化、自锁圆柱形螺母用、弹性金属片固定器 | Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated; German and English version EN 4590:2005 |
| DIN EN 4591-2007 | 航空航天系列.MoS2润滑的耐高温镍基合金不固定式自准自锁紧圆筒螺母.分类:1550MPa(室温)/315℃ | Aerospace series - Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS<(Index)2> lubricated - Classification: 1550 MPa (at ambient temperature)/315 °C; German and English version EN 4591:2005 |
| DIN EN 4592-2007 | 航空航天系列.涂料和清漆.测定红外线反射率的试验方法 | Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance; German and English version EN 4592:2006 |
| DIN EN 4610-2007 | 航空航天系列.钛合金8°30'管连接件.带有推力线螺母的45°弯头 | Aerospace series - Pipe coupling 8° 30' in titanium alloy - Elbows 45°, with thrust wire nut; German and English version EN 4610:2005 |
| DIN EN 4615-2007 | 航空航天系列.MG-C18002型镁合金.T4.砂型铸造 | Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting; German and English version EN 4615:2005 |
| DIN EN 4616-2007 | 航空航天系列.型MG-C18002镁合金.T4.冷型铸造 | Aerospace series - Magnesium alloy MG-C18002 - T4 - Chill casting; German and English version EN 4616:2005 |
| DIN EN 9100-2003 | 航空航天系列.质量管理体系.要求(基于ISO 9001-2000)和质量体系.设计、开发、生产、安装和维修的质量保证模 | Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and quality system; Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994); German and English version EN 9100:2003 |
| DIN EN 9102-2007 | 航空航天系列.质量体系.重要部件的检验 | Aeropace series - Quality systems - First article inspection; German and English version EN 9102:2006 |
| DIN EN 9103-2007 | 航空航天系列.质量管理系统.关键特征的变更管理 | Aerospace series - Quality management systems - Variation management of key characteristics; German and English version EN 9103:2005 |
| DIN EN 9104-2007 | 航空航天系列.质量管理系统.航空航天质量管理体系认证/注册程序要求 | Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs; German and English version EN 9104:2006 |
| DIN EN 9110-2007 | 航空航天系列.质量体系.维修机构用质量保证模式 | Aerospace series - Quality systems - Model for quality assurance applicable to maintenance organizations; German and English version EN 9110:2005 |
| DIN EN 9120-2007 | 航空航天系列.质量管理系统.零售分销商的要求(基于ISO9001-2000) | Aerospace series - Quality management systems - Requirements for stockist distributors (based on ISO 9001:2000); German and English version EN 9120:2005 |
| DIN EN 9121-2007 | 航空航天系列.质量管理体系.适用于库存批发商的评估(基于ISO 9001-2000) | Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000); German and English version EN 9121:2005 |
| DIN EN 9133-2007 | 航空航天系列.质量管理体系.航空航天标准部件的合格测试程序 | Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts; German and English version EN 9133:2004 |
| DIN EN ISO 14620-1-2005 | 航天系统.安全要求.第1部分:系统安全 | Space systems - Safety requirements - Part 1: System safety (ISO 14620-1:2002); German and English version EN ISO 14620-1:2002 |
| DIN EN ISO 16091-2003 | 航天系统.统一的后勤支援 | Space systems - Integrated logistic support (ISO 16091:2002); German and English version EN ISO 16091:2002 |
| DIN EN ISO 17666-2003 | 航天系统.风险管理 | Space systems - Risk management (ISO 17666:2003); German version EN ISO 17666:2003 |
| DIN EN ISO 21351-2005 | 航天系统.功能和技术规范(ISO 21351-2005); 德文和英文版本 EN ISO 21351-2005 | Space systems - Functional and technical specifications (ISO 21351:2005); German and English version EN ISO 21351:2005 |
| DIN ISO 102-1980 | 航空航天.飞行器的重力加油口 | Aerospace; aircraft, gravity filling orifices |
| DIN ISO 1021-1983 | 航空和航天.发动机舱灭火器孔和门 | Aircraft; engine nacelle fire extinguisher apertures and doors |
| DIN ISO 1034-1980 | 航空航天.飞行器用地面空调连接装置 | Aerospace; aircraft, ground air conditioning connections |
| DIN ISO 10502-1997 | 航空航天.温度为230℃以下气压为10500KPa时使用的聚四氟乙烯(PTFE)软管.采购规范 | Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa - Procurement specification (ISO 10502:1992) |
| DIN ISO 10583-1998 | 航空航天流体系统.管/管接头组件的试验方法 | Aerospace fluid systems - Test methods for tube/fitting assemblies (ISO 10583:1993) |
| DIN ISO 10792-2-1996 | 航空航天.带自动润滑层的耐腐蚀钢制机身球面滑动轴承.第2部分:英制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series; identical with ISO 10792-2:1995 |
| DIN ISO 10792-3-1996 | 航空航天.带自动润滑层的耐腐蚀钢制机身球面滑动轴承.第3部分:交货技术条件 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification; identical with ISO 10792-3:1995 |
| DIN ISO 11217-1994 | 航空航天.液压系列流体污染物.取样点定位和取样准则 | Aerospace; hydraulic system fluid contamination; location of sampling points and criteria for sampling; identical with ISO 11217:1993 |
| DIN ISO 11218-1994 | 航空航天.液压流液污染度的分类 | Aerospace; cleanlinless classification for hydraulic fluids; identical with ISO 11218:1993 |
| DIN ISO 2020-1-1999 | 航空航天.飞行器控制用预成形柔性钢丝绳索.第1部分:尺寸和负载 | Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 1: Dimensions and loads (ISO 2020-1:1997) |
| DIN ISO 2020-2-1999 | 航空航天.飞行器控制用预成形柔性钢丝绳索.第2部分:技术规范 | Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 2: Technical specification (ISO 2020-2:1997) |
| DIN ISO 2574-1999 | 航空航天系列.飞行器电缆.制造商标识 | Aerospace series - Aircraft electrical cables - Manufacturer's identification marking (ISO 2574:1994) |
| DIN ISO 2964-1986 | 航空航天.管材.外径和管壁厚度.米制尺寸.与 ISO 2964相同, 1985版 | Aerospace; tubing; outside diameters and thicknesses; metric dimensions; identical with ISO 2964, edition 1985 |
| DIN ISO 4095-1980 | 航空和航天.宇航结构用紧固件.双六角(12角)扳手外形 | Aerospace; fasteners for aerospace construction, bi-hexagonal wrenching configuration |
| DIN ISO 413-1987 | 航空航天.润滑油加油管嘴头 | Aircraft; heads of lubricating nipples; identical with ISO 413, edition 1974 |
| DIN ISO 43-1981 | 航空航天.飞机.千斤顶支板 | Aerospace; aircraft; jacking pads |
| DIN ISO 44-1980 | 航空和航天.拉杆操纵的双位ON/OFF开关.操纵方向 | Aerospace; lever-operated, two-position, ON/OFF switches, directions of operation |
| DIN ISO 45-1983 | 航空和航天.压力加油连接装置 | Aircraft; pressure refuelling connections |
| DIN ISO 482-1983 | 航空和航天.推进装置和元件.编号和旋转方向描述方法 | Aircraft; propulsion units and components; methods of numbering and describing directions of rotation |
| DIN ISO 5845-2-1997 | 技术图样.紧固件组装简化表示法.第2部分:航空航天设备用铆钉 | Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment (ISO 5845-2:1995) |
| DIN ISO 5855-1-1989 | 航空航天.MJ螺纹.第1部分:一般要求; 等同采用 ISO 5855-1:1988 | Aerospace; MJ-threads; general requirements; identical with ISO 5855-1:1988 |
| DIN ISO 5855-2-1989 | 航空航天.MJ螺纹.第2部分:螺栓和螺母的极限尺寸; 等同采用 ISO 5855-2:1988 | Aerospace; MJ threads; limit dimensions for bolts and nuts; identical with ISO 5855-2:1988 |
| DIN ISO 5855-3-1996 | 航空航天.MJ螺纹.第3部分:流体系统配件的极限尺寸 (ISO 5855-3:1988) | Aerospace - MJ threads - Part 3: Limit dimensions for fitting for fluid systems (ISO 5855-3:1988) |
| DIN ISO 5884-1989 | 航空航天.流体系统和部件.液压流体中固体微粒污染的系统取样和测量方法 | Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987 |
| DIN ISO 6771-1984 | 航空航天.航空航天结构.流体系统和部件.压力和温度 | Aerospace; aerospace construction; fluid systems and components; pressure and temperature |
| DIN ISO 6772-1996 | 航空航天.流体系统.液压软管、管道和连接组件的脉冲试验 (ISO 6772:1988) | Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies (ISO 6772:1988) |
| DIN ISO 6773-1996 | 航空航天.流体系统.管道和配件的热冲击试验 (ISO 6773:1994) | Aerospace - Fluid systems - Thermal shock testing of piping and fittings (ISO 6773:1994) |
| DIN ISO 7258-1987 | 航空航天.航空航天用聚四氟乙烯(PTFE)软管.密度和相对密度的测定方法.与ISO7258, 1984相同 | Aerospace; polytetrafluoroethylene (PTFE) tubing for aerospace applications; methods for the determination of the density and relative density; identical with ISO 7258, edition 1984 |
| DIN ISO 7319-1996 | 航空航天.流体系统.24度锥形公制联轴器界面 (ISO 7319:1992) | Aerospace - Fluid systems - Interface of 24° cone metric couplings (ISO 7319:1992) |
| DIN ISO 7320-1996 | 航空航天.流体系统用螺纹密封联轴器.尺寸 (ISO 7320:1992) | Aerospace - Couplings, threaded and sealed, for fluid systems - Dimensions (ISO 7320:1992) |
| DIN ISO 7913-1986 | 航空和航天.紧固件.螺栓和螺钉的形状和位置公差.等同采用 ISO 7913-1986 | Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985 |
| DIN ISO 8575-1998 | 航空航天.流体系统.液压系统管道 | Aerospace - Fluid systems - Hydraulic system tubing (ISO 8575:1990) |
| DIN ISO 8775-1988 | 航空航天.流体系统用氧气补充连接管.尺寸(英制系列) | Aerospace; gaseous oxygen replenishment connection for use in fluid systems (new type); dimensions (inch series); identical with ISO 8775:1988 |
| DIN ISO 8788-1988 | 航空航天.紧固件.螺母的形状和位置公差 | Aerospace; fasteners; tolerances of form and position for nuts; identical with ISO 8788, edition 1987 |
| DIN ISO 9152-2005 | 航空航天.强度等级为1100 MPa的钛合金制MJ螺纹螺栓.采购规范 | Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification (ISO 9152:1998) |
| DIN ISO 9634-1996 | 航空航天.流体系统.塑料保护帽和保护塞尺寸 (ISO 9634:1994) | Aerospace - Fluid systems - Dimensions of plastic protective caps and plugs (ISO 9634:1994) |
| DIN ISO 9939-1995 | 航空航天. 压力加油连接器(新型号) (ISO 9939:1994) | Aerospace - Pressure re-oiling connection (new type) (ISO 9939:1994) |
| DIN V 65352 Bb.1-1987 | 航空航天.纤维复合物的合格鉴定和验收试验结果的统计评价方法.计算实例 | Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites; example of calculation |
| DIN V 65352-1987 | 航空航天.纤维复合物的合格鉴定和验收试验结果的统计评价方法 | Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites |
| DIN V 65380-1987 | 航空航天.纤维加筋塑料.单向叠层板材的试验.与纤维方向平行和横切的压缩试验 | Aerospace; fiber-reinforced plastics; testing of unidirectional laminates; compression test, parallel and transverse to fiber direction |
| DIN V 65579-1991 | 航空航天.碳纤维.化学分析.类金属元素的测定 | Aerospace; carbon fibres; chemical analysis; determination of the metalloid elements |
| DIN V 65900-11-2001 | 航空航天系列.螺栓和销钉.材料(AECMA 技术报告TR 3775:1999) | Aerospace series - Bolts and pins - Materials (AECMA Technical Report TR 3775:1999) |
| DIN V 65900-12-1997 | 航空航天.金属材料.尺寸标准和材料标准对照关系 | Aerospace series - Metallic matrials - Relationship between dimensional standards and material standards (AECMA Technical Report TR 2410:1996) |
| DIN V 65900-13-1998 | 航空航天系列.液体和气体用的柔性软管和软管组件的设计及制造.安装 | Aerospace series - Design and construction of flexible hoses and hose assemblies for fluids in liquid and gaseous condition - Installation (AECMA Technical Report TR 2675:1996 + Corrigendum 1997) |
| DIN V 65900-14-1998 | 航空航天系列.液体或气体条件下管道的设计和结构.设施的刚性管线 | Aerospace series - Design and construction of pipeline for fluids in liquid or Gaseous condition - Rigid lines, installation (AECMA Technical Report TR 2674:1997) |
| DIN V 65900-15-1999 | 航空航天系列.温度等级≤425℃用自锁螺母,螺纹镶嵌件的材料 | Aerospace series - Materials for self-locking nuts, threaded inserts and screw thread inserts of temperature classes 425 °C (AECMA Technical Report TR 3791:1999) |
| DIN V 65900-16-1998 | 航空航天系列.用塑料环自锁的带槽普通六角头螺母的材料 | Aerospace series - Materials for plain, slotted and self-locking by plastic ring hexagonal nuts (AECMA Technical Report TR 3823:1998) |
| DIN V 65900-17-2001 | 航空航天系列.O形环槽.O形环槽设计准则.基本计算 | Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000) |
| DIN V 65900-18-2001 | 航空航天.双六角自锁螺母.技术规范扭矩.基本计算 | Aerospace series - Nuts, bihexagonal, self-locking - Torque for technical specifications - Basic calculations (AECMA Technical Report TR 4597:2000) |
| DIN V 65900-19-2001 | 航空航天.弹簧拉力夹.设计推荐规范 | Aerospace series - Clips, spring tension - Design recommandations (AECMA Technical Report TR 4586:2000) |
| DIN V 65900-20-2001 | 航空航天.弹簧拉力夹.装配推荐规范 | Aerospace series - Clips, spring tension - Assembly recommandations (AECMA Technical Report TR 4587:2000) |
| DIN V 65900-3-1992 | 航空航天.第3部分:自锁式线螺纹插件的使用和选择; 等同采用 AECMA-technical report TR 3540:1992 | Aerospace series; use and selection of self-locking wire thread inserts; identical with AECMA-technical report TR 3540:1992 |
| DIN V 65900-4-1993 | 航空和航天.金属材料.AECMA名称体系之间的关系 | Aerospace series; metallic materials; relationship between AECMA designation systems; identical with AECMA-technical report TR 3900:1993 |
| DIN V 65900-5-1994 | 航空航天.法兰连接的流体配件.第5部分:组装用推荐标准; 等同采用 AECMA-Technical Report TR 3634:1993 | Aerospace series; fluid fittings, flanged; assembly recommendations; identical with AECMA-Technical Report TR 3634:1993 |
| DIN V 65900-6-1995 | 航空航天系列.钛合金管道联轴节、松动式法兰和密封件.总装建议 (AECMA 技术报告 TR 4053:1994) | Aerospace series - Pipe couplings, loose flanges and seals, in titanium alloy Assembly recommendations (AECMA Technical Report TR 4053:1994) |
| DIN V 65900-7-1995 | 航空航天系列.钛合金60度球形管道联轴节.总装建议 (AECMA 技术报告 TR 4052:1995) | Aerospace series - Pipe couplings 60 °, spherical, in titanium alloy - Assembly recommendations (AECMA Technical Report TR 4052:1995) |
| DIN V 65900-8-1995 | 航空航天系列.弹簧张力式三节管夹.总装建议 (AECMA 技术报告 TR 4169:1995) | Aerospace series - Clips, spring tension, three parts - Assembly recommendations (AECMA Technical Report TR 4169:1995) |
| DIN V EN 2155-15-1986 | 航空航天系列.飞行器窗玻璃用透明材料的试验方法.第15部分:热稳定性的测定 | Aerospace series; test methods for transparent materials for aircraft glazing; part 15: determination of thermal stability |
| DIN V EN 2155-4-1986 | 航空航天系列.飞行器窗玻璃用透明材料的试验方法.第4部分:在290-330nm时紫外线辐射透射的测定 | Aerospace series, test methods for transparent materials for aircraft glazing; part 4: determination of ultra-violet radiation transmission at 290 to 330 nm |
| DIN V EN 2155-6-1986 | 航空航天系列.飞行器窗玻璃用透明材料的试验方法.第6部分:光学缺陷的测定 | Arospace series; test methods for transparent materials for aircraft glazing; part 6: determination of optical defects |
| DIN V EN 2345-1985 | 航空航天系列.铝及铝合金铆钉.技术规范 | Aerospace series; aluminium and aluminium alloy rivets; technical specification |
| 编号 | 中文名称 | 英文名称 |