| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| NF L00-007-1992 | 航空航天工业.词汇.一般术语 | (Aerospace industry. Vocabulary. General terms.) |
| NF L00-015-1997 | 航空航天.质量管理和保险.合格声明 | (Aerospace. Quality management and assurance. Statement of conformity.) |
| NF L00-081-1992 | 航空航天系列.质量保证.EN 航空航天产品.生产厂质量体系认可 | (Aerospace series. Quality assurance EN. Aerospace products. Approval of the quality system of manufacturers.) |
| NF L00-082-1992 | 航空航天系列.质量保证.EN 航空航天产品.质量鉴定方法 | (Aerospace series. Quality assurance EN. Aerospace products. Qualification procedure.) |
| NF L05-026-1988 | 航天工业.ISO 螺纹末端退刀槽和倒角 | (Aerospace industry. ISO M and mj threads. Undercut relief and lead-in chamfers.) |
| NF L05-220-1990 | 航空和航天.三角形剖面的ISO 螺纹.剖面、直径和螺距 | (Aircraft and aerospace. ISO M thread. Profiles, dimensions and designation.) |
| NF L05-222-1990 | 航天工业.ISO螺纹.剖面图和公差 | (Aircraft industry. ISO M thread. Limiting profiles and tolerances (so-called “BNAE tolerances“).) |
| NF L05-223-1990 | 航空和航天工业制造用ISO 螺纹公差 | (Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for manufacturers.) |
| NF L05-224-1990 | 航空和航天螺栓用ISO 螺纹公差 | (Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for bolts and nuts.) |
| NF L05-230-1-1990 | 航空和航天.MJ螺纹.第1部分:一般要求 | (AEROSPACE. MJ THREADS. PART 1 : GENERAL REQUIREMENTS.) |
| NF L05-230-2-1990 | 航空和航天.MJ螺纹.第2部分:螺栓和螺母的尺寸 | (AEROSPACE. MJ THREADS. PART 2 : LIMIT DIMENSIONS FOR BOLTS AND NUTS.) |
| NF L05-230-3-1990 | 航空和航天.MJ螺纹.第3部分:流体系统连接件的极限尺寸 | (AEROSPACE. MJ THREADS. PART 3 : LIMIT DIMENSIONS FOR FITTINGS FOR FLUID SYSTEMS.) |
| NF L06-150-1996 | 航空航天系列.质量保证和管理.技术检验和操作人员合格的标志(原定义) | (Aerospace series. Quality assurance and control. Technical inspection and operators` qualification marks (former definition).) |
| NF L06-160-1996 | 航空航天系列.质量管理和保证.技术检验和操作人员合格的标志 | (AEROSPACE SERIES. QUALITY MANAGEMENT AND ASSURANCE. TECHNICAL INSPECTION AND QUALIFIED OPERATORS MARKS.) |
| NF L06-351-1995 | 航空和航天工业.热喷镀涂层.涂层质量 | (AEROSPACE INDUSTRY. COATINGS THROUGH THERMAL SPRAYING. QUALITY OF COATINGS.) |
| NF L06-380-10-2003 | 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第10部分:一般要求 | (Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 10 : general requirements.) |
| NF L06-380-20-2003 | 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第20部分:均质铝及铝合金组件 | (Aerospace series - Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 20 : homogeneous assemblies aluminium and aluminium al) |
| NF L06-380-21-2003 | 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第21部分:均质非合金及低合金钢组 | (Aerospace series - Welded and brazed assemblies for aerospace construction - Weldability and beazability of materials - Part 21 : homgeneous assemblies of unalloyed and low alloy steels.) |
| NF L06-383-1987 | 航空和航天制造用焊作和钎焊件.点焊和滚轮焊的电阻焊接件.焊件质量 | (Welded and brazed assemblies for aerospace constructions. Resistance spot or seam welded assemblies. Quality of welded assemblies.) |
| NF L06-384-1988 | 航天工业构件用焊接和钎焊组件.摩擦焊接组件.焊接组件的质量 | (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. FRICTION WELDED ASSEMBLIES. QUALITY OF WELDED ASSEMBLIES.) |
| NF L06-385-1987 | 航空和航天制造用焊件和钎焊件.点焊和滚轮焊接机器.规范和分类的 | (Welded and brazed assemblies for aerospace constructions. Resistance spot or seam welding machines. Qualification specifications.) |
| NF L06-386-1988 | 航天工业用焊接和钎焊组件.摩擦焊接机.合格规范 | (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. FRICTION WELDING MACHINES. QUALIFICATION SPECIFICATIONS.) |
| NF L06-387-1991 | 航天结构用焊接和钎焊组装件.用电子束焊接金属材料组装件 | (Weldments and brazements for aerospace structures. Joints of metallic materials by electron beam welding. Quality of weldments.) |
| NF L06-388-1991 | 航天结构用焊接和钎焊组装件.电子束焊接机.鉴定规程 | (Welded and brazed assemblies for aerospace constructions. Electron beam welding machine. Qualification specifications.) |
| NF L06-391-1994 | 航天结构用焊接和钎焊组装件.用扩散焊接法安装金属材料组装件.焊接组装件的质量 | (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION. ASSEMBLY OF METALLIC MATERIALS CARRIED OUT BY DIFFUSION WELDING. QUALITY OF WELDED ASSEMBLIES.) |
| NF L06-393-1995 | 航空和航天工业.航天结构用焊接和钎焊组装件.根据T.I.G进行加工处理的焊接机械.合格规范 | (AIRCRAFT INDUSTRIE. WELDED AND SOLDERED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. WELDING MACHINE ACCORDING TO T.I.G. PROCESS. SPECIFICATION FOR QUALIFICATION.) |
| NF L06-394-1999 | 飞行器工业.航空与航天结构的焊接和钎焊. 用TIG方法的金属材料焊接组件.焊接质量 | (AIRCRAFT INDUSTRIE. WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES. ASSEMBLY OF METALLIC MATERIALS WELDED BY TIG METHOD. QUALITY OF WELDMENTS.) |
| NF L06-510-1983 | 航空和航天工业中铝合金数据处理用带尾柄圆柱形双刃铣刀的选择 | (Selection of end mills with shanks to be used in aerospace industry for numerical control machining of aluminium alloys.) |
| NF L06-821-1988 | 航空和航天.喷丸.验收条件 | (AEROSPACE INDUSTRY. BLAST MEDIA. ACCEPTANCE TEST SPECIFICATION.) |
| NF L06-822-1988 | 航空和航天.喷丸.石英 | (AEROSPACE INDUSTRY. BLAST MEDIA. QUARTZ.) |
| NF L06-823-1988 | 航空和航天.喷丸.玻璃球 | (AEROSPACE INDUSTRY. BLAST MEDIA. GLASS BEADS.) |
| NF L06-824-1988 | 航空和航天.喷丸.瓷球 | (AEROSPACE INDUSTRY. BLAST MEDIA. CERAMIC BEADS.) |
| NF L06-825-1988 | 航空和航天.喷丸.铸钢的角度喷处理 | (AEROSPACE INDUSTRY. BLAST MEDIA. GRIT CAST STEEL SHOT.) |
| NF L06-826-1988 | 航空和航天.喷丸.铸钢丸 | (AEROSPACE INDUSTRY. BLAST MEDIA. ROUND CAST STEEL SHOT.) |
| NF L06-827-1988 | 航空和航天.喷丸.植物状的 | (AEROSPACE INDUSTRY. BLAST MEDIA. PLANTS.) |
| NF L06-829-1988 | 航空和航天.喷丸.无铁棕刚玉 | (AEROSPACE INDUSTRY. BLAST MEDIA. ALUMINIUM OXIDE.) |
| NF L06-832-1998 | 航空航天工业.金属部分压缩表面张力的诱导喷射冷锻处理 | (Aerospace industry. Shot peening for inducement of compressive surface stresses for metallic parts.) |
| NF L06-850-2001 | 航空航天系列.非金属材料.设计产品.塑料粒子.技术规范 | (Aerospace series - Non metallic materials - Projecting products - Plastic particles - Technical specification.) |
| NF L07-110-1992 | 航空航天系列.除发动机以外的零部件的标志.图纸上的说明标志 | (Aerospace series. Marking of parts and assemblies other than engines. Indications on drawings.) |
| NF L07-157-1980 | 航空和航天设备图纸上焊缝的定义 | (Definition of welds on drawings of aerospace equipment.) |
| NF L07-158-1990 | 航天系列.焊接.图纸上的数据 | (AEROSPACE SERIES. WELDS. INFORMATION ON DRAWINGS. (EUROPEAN STANDARD EN 2574).) |
| NF L07-186-1969 | 航空和航天用布线图中电气开关连续性的表示 | (REPRESENTATION OF ELECTRICAL SWITCHING CONTINUITY IN WIRING DIAGRAMS FOR AEROSPACE APPLICATIONS.) |
| NF L07-201-1987 | 航空航天系列.计算机输出缩微胶片.缩微胶片A6 | (Aerospace series. Computer output microfiche (com). A6 microfiche.) |
| NF L07-202-1989 | 航空航天系列.图纸的缩微胶片录制.35mm缩微胶卷打孔卡 | (AEROSPACE SERIES. MICROFILMING OF DRAWINGS. APERTURE CARD FOR 35 MM MICROFILM. (EUROPEAN STANDARD EN 2484).) |
| NF L07-203-1987 | 航空航天系列.文件的拍摄.105mm 缩微胶片(A6缩微胶片)(EN 2547) | (AEROSPACE SERIES. FILMING OF DOCUMENTS. MICROFILM 105 MM (MICROFICHE A6). (EUROPEAN STANDARD EN 2547).) |
| NF L07-204-1989 | 航空航天系列.文献缩微.16mm缩微胶卷 | (AEROSPACE SERIES. FILMING OF DOCUMENTS. 16 MM MICROFILM. (EUROPEAN STANDARD EN 2575).) |
| NF L09-002-1972 | 航空和航天器材的改进和修理的鉴定 | (AEROSPACE COMPONENT PART NUMBERS. IDENTIFICATION OF MAJOR AND MINOR MODIFICATIONS.) |
| NF L09-005-1980 | 航空和航天设备的识别.技术档案中识别装置的使用规则 | (IDENTIFICATION OF AEROSPACE COMPONENTS. RULES FOR THE USE OF THE IDENTIFICATION BLOCK IN DATA RECORDS.) |
| NF L09-020-1977 | 航空和航天设备识别标志 | (IDENTIFICATION MARKING FOR AEROSPACE EQUIPMENT.) |
| NF L09-101-1994 | 航空和航天.制造和检验.工具分类计划和鉴定标准 | (Aircraft and space vehicles. Manufacture and control. Part number and classification plan of toolings.) |
| NF L10-005-1-2002 | 航空航天系列.金属材料.第1部分:常规命名 | (Aerospace series - Metallic materials - Part 1 : conventional designation.) |
| NF L10-005-2-1994 | 航空航天系列.冶金材料.第2部分:交货时金相条件编码 | (Aerospace series. Metallic materials. Part 2 : coding of metallurgical condition in delivery condition.) |
| NF L10-006-2002 | 航空航天系列.金属材料.生产进度表、检验进度表、检验和试验报告.定义、一般原理、制备和验收 | (Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval.) |
| NF L10-015-2002 | 航空航天系列.金属材料.金属半成品产品尺寸标准的起草和说明规则 | (Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products.) |
| NF L10-020-1998 | 航空和航天系列.金属材料.一般结构和标准化.EN标准和其使用型之间的链接 | (Aerospace series. Metallic materials. General organization of standardization. Links between types of EN standards and their use.) |
| NF L10-060-2002 | 航空航天系列.金属半成品.测量形状偏差的方法 | (Aerospace series - Semi-finished metallic products - Methods of measuring form deviations.) |
| NF L10-070-1987 | 航空和航天.管材.外径和管壁厚度.米制尺寸 | (AEROSPACE. TUBING. OUTSIDE DIAMETERS AND THICKNESSES. METRIC DIMENSIONS.) |
| NF L10-100-1991 | 航空和航天系列.非金属材料分类用耐火性试验方法 | (Aerospace series. Test methods for the flame resistance rating of non-metallic materials.) |
| NF L10-110-1993 | 航空航天系列.经过抛光的金属覆层的粘结试验 | (AEROSPACE SERIES. ADHESION TEST FOR METALLIC COATINGS BY BURNISHING. (EUROPEAN STANDARD EN 2828).) |
| NF L10-111-1995 | 航空航天系列.经过喷丸硬化的金属涂层的粘结试验 | (AEROSPACE SERIES. ADHESION TEST FOR METALLIC COATINGS BY SHOT PEENING. (EUROPEAN STANDARD EN 2829).) |
| NF L10-112-1993 | 航空航天系列.经过剪切的金属覆层的粘结试验 | (AEROSPACE SERIES. ADHESION TEST FOR METALLIC COATINGS BY SHEARING ACTION. (EUROPEAN STANDARD EN 2830).) |
| NF L10-113-1993 | 航空航天系列.钢的氢脆.慢挠曲试验 | (Aerospace series. Hydrogen embrittlement of steels. Test by slow bending.) |
| NF L10-114-1993 | 航空航天系列.钢的氢脆.刻槽试件试验 | (Aerospace series. Hydrogen embrittlement of steels. Notched specimen test.) |
| NF L10-200-1995 | 航空和航天.最大厚度10千分尺的金属衬底表面用不带有粘结材料或填料的干式氟碳润滑剂.涂层配件的质量 | (AEROSPACE SERIES. LUBRICATING DRY FLUOROCARBONATED WITHOUT BINDING MATERIAL OR FILLER, MAXIMUM THICKNESS OF 10 MICROMETER ON METALLIC SUBSTRATE. QUALITY OF COATED PARTS.) |
| NF L10-201-1998 | 航空航天工业.金属底层最小厚度5微米的带粘接材料和滤膜的润滑碳氟化合物镀膜.镀膜部分的质量 | (AEROSPACE SERIES. LUBRICATING DRY FLUOROCARBONATED COATING WITH BINDING MATERIAL AND FILLERS, OF A MINIMUM THICKNESS OF 5 MICROMETERS ON METALLIC SUBSTRATE. QUALITY OF COATED PARTS.) |
| NF L10-211-1994 | 航空航天系列.干膜润滑试验方法.钢样抗腐蚀试验(欧洲标准EN 3026) | (Aerospace series. Test method for dry film lubricants. Corrosion test on steel specimens.) |
| NF L10-212-1994 | 航空和航天.干润滑膜的检验方法.盐雾试验(欧洲标准EN 3027) | (Aerospace series. Test method for dry film lubricants. Salt spray test.) |
| NF L10-213-1994 | 航空航天系列.干膜润滑试验方法.实粒含量测量(欧洲标准EN 3030) | (Aerospace series. Test method for dry film lubricants. Solids content.) |
| NF L10-214-1994 | 航空航天系列.干膜润滑试验方法.厚度测量(欧洲标准EN 3032) | (Aerospace series. Test method for dry film lubricants. Thickness measurement.) |
| NF L10-215-1997 | 航空航天系列.二硫化钼干膜润滑油.涂覆法(欧洲标准EN 2491) | (AEROSPACE SERIES. MOLYBDENUM DISULPHIDE DRY LUBRICANTS. COATING METHODS. (EUROPEAN STANDARD EN 2491).) |
| NF L10-270-1-1993 | 航空和航天系列.铝和铝合金产品的试验方法.第1部分:锻铝合金产品的导电性测定 | (Aerospace series. Test methods for aluminium and aluminium alloy products. Part 1 : determination of electrical conductivity of wrought aluminium alloy products.) |
| NF L10-270-5-1993 | 航空和航天系列.铝和铝合金产品的试验方法.第5部分:包层半成品的包层厚度及铜分散度的测定 | (Aerospace series. Test methods for aluminium and aluminium alloy products. Part 5 : determination of cladding thickness and copper diffusion of clad semi-finished products.) |
| NF L10-301-1989 | 航空和航天系列.钛和钛合金的干喷沙处理 | (AEROSPACE SERIES. DRY ABRASIVE BLASTING OF TITANIUM AND TITANIUM ALLOYS. (EUROPEAN STANDARD EN 2497).) |
| NF L10-302-1998 | 航空航天系列.规定拉伸强度小于或等于1450MPA的铜、铜合金和镍合金钢的镀镉 | (AEROSPACE SERIES. CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH INFERIOR OR EQUAL TO 1450 MPA, COPPER, COPER ALLOYS AND NICKEL ALLOYS. (EUROPEAN STANDARD EN 2133).) |
| NF L10-307-1997 | 航空航天系列.耐腐蚀钢的钝化和镍基合金的净化(欧洲标准EN 2516) | (AEROSPACE SERIES. PASSIVATION OF CORROSION RESISTING STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS. (EUROPEAN STANDARD EN 2516).) |
| NF L10-308-1997 | 航空航天系列.耐腐蚀钢和耐热合金的电解抛光(欧洲标准EN 3769) | (AEROSPACE SERIES. ELECTROLYTIC POLISHING OF CORROSION RESISTING STEELS AND HEAT RESISTING ALLOYS. (EUROPEAN STANDARD EN 3769).) |
| NF L10-309-1997 | 航空和航天系列硫酸铬中铝和铝合金的酸洗 | (AEROSPACE SERIES. CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS. (EUROPEAN STANDARD EN 2334).) |
| NF L10-310-1992 | 航空航天系列.铝和锻压铝合金的铬酸阳极化 | (AEROSPACE SERIES. CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS. (EUROPEAN STANDARD EN 2101).) |
| NF L10-311-1995 | 航天航空系列.铝合金的淬硬阳极极化 | (AEROSPACE SERIES. HARD ANODIZING OF ALUMINIUM ALLOYS. (EUROPEAN STANDARD EN 2536).) |
| NF L10-312-1997 | 航天航空系列.钛及钛合金的阳极极化(欧洲标准EN 2808) | (Aerospace series. Anodizing of titanium and titanium alloys.) |
| NF L10-315-1992 | 航空航天系列.铝和锻压铝合金的硫阳极化 | (Aerospace series. Sulphuric acid anodizing of aluminium and wrought aluminium alloys.) |
| NF L10-316-2002 | 航空航天系列.铝及铝合金用铬酸盐转化膜(黄色) | (Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys.) |
| NF L10-470-1982 | 航空和航天制造用铜和铜合金锻制棒材的检验和试验条件 | (INSPECTION AND TEST REQUIREMENTS OF WROUGHT BARS IN COPPER AND COPPER ALLOYS FOR AEROSPACE CONSTRUCTION.) |
| NF L10-471-1983 | 航空和航天制造用铜和铜合金板材带材的检验和试验条件 | (INSPECTION AND TEST REQUIREMENTS OF SHEETS AND STRIPS IN COPPER AND COPPER ALLOYS FOR AEROSPACE CONSTRUCTION.) |
| NF L10-500-1-1993 | 航空航天系列.钢.锻坯和锻件.技术规范.第1部分:一般要求 | (AEROSPACE SERIES. STEEL. FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2157-1).) |
| NF L10-500-2-1993 | 航空航天系列.钢.锻坯和锻件.技术规范.第2部分:锻坯 | (AEROSPACE SERIES. STEEL. FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 2 : FORGING STOCK. (EUROPEAN STANDARD EN 2157-2).) |
| NF L10-500-3-1993 | 航空航天系列.钢.锻坯和锻件.技术规范.第3部分:预生产和生产用锻件 | (AEROSPACE SERIES. STEEL. FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION FORGINGS. (EUROPEAN STANDARD EN 2157-3).) |
| NF L10-600-1-1990 | 航空和航天系列.铝和铝合金锻制半成品.技术规范.第1部分:一般要求 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2070-1).) |
| NF L10-600-11-1993 | 航空和航天系列.铝和铝合金锻制半成品.技术规范.第1部分:一般要求.补充件1 | () |
| NF L10-600-2-1990 | 航空和航天系列.铝合铝合金锻制半成品.技术规范.第2部分:薄板、带材、弯曲的型材和厚板 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 2 : SHEET,STRIP,FORMED PROFILES AND PLATE. (EUROPEAN STANDARD EN 2070-2).) |
| NF L10-600-3-1990 | 航空和航天系列.铝合铝合金锻制半成品.技术规范.第3部分:棒材和型材 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 3 : BAR AND SECTION. (EUROPEAN STANDARD EN 2070-3).) |
| NF L10-600-4-1990 | 航空和航天系列.铝和铝合金锻制半成品.技术规范.第4部分:结构用管子 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PROUDCTS. TECHNICAL SPECIFICATION. PART 4 : TUBE FOR STRUCTURES. (EUROPEAN STANDARD EN 2070-4).) |
| NF L10-600-5-1990 | 航空和航天系列.铝合铝合金锻制半成品.技术规范.第5部分:压力管 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 5 : TUBE USED UNDER PRESSURE. (EUROPEAN STANDARD EN 2070-5).) |
| NF L10-600-6-1990 | 航空和航天系列.铝合铝合金锻制半成品.技术规范.第6部分.铆接线 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 6 : RIVET WIRE. (EUROPEAN STANDARD EN 2070-6).) |
| NF L10-600-7-1990 | 航空和航天系列.铝合铝合金锻制半成品.技术规范.第7部分:锻工场用的锻造产品 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 7 : WROUGHT FORGING STOCK. (EUROPEAN STANDARD EN 2070-7).) |
| NF L10-601-1-1990 | 航空和航天系列.铅合金和镁合金铸件和铸锭.技术说明.第1部分:一般要求.(欧洲标准EN 2076-1) | (AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2076-1).) |
| NF L10-601-11-1993 | 航空和航天系列.铅合金和镁合金铸件和铸锭.技术说明.第1部分:一般要求.(欧洲标准EN 2076-1).补充件1 | () |
| NF L10-601-2-1990 | 航空和航天系列.铝合金和镁合金铸件和铸锭.技术说明.第2部分:重熔用锭.(欧洲标准EN 2076-2) | (AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 2 : INGOTS FOR REMELTING. (EUROPEAN STANDARD EN 2076-2).) |
| NF L10-601-3-1990 | 航空和航天系列.铅合金和镁合金铸件和铸锭.技术说明.第3部分:标准部件和系列部件.(欧洲标准EN 2076) | (AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION CASTINGS. (EUROPEAN STANDARD EN 2076-3).) |
| NF L10-602-1-1990 | 航空和航天系列.锻造产品、锻件和铝合金模锻.技术规范.第１部分：一般要求 | (Aerospace series. Aluminium alloy forging stock and forgings. Technical specification. Part 1 : general requirements.) |
| NF L10-602-11-1993 | 航空和航天系列. 锻造产品、锻件和铝合金模锻.技术规范.第１部分：一般要求(欧洲标准EN 2082-1的补充件) | () |
| NF L10-602-2-1990 | 航空和航天系列.锻造产品、锻件和铝合金模锻.技术规范.第2部分:锻造产品 | (Aerospace series. Aluminium alloy forging stock and forgings. Technical specification. Part 2 : forging stock.) |
| NF L10-602-3-1990 | 航空和航天系列.锻造产品、锻件和铝合金模锻.技术规范.第3部分:锻件系列和锻件型号 | (AEROSPACE SERIES. ALUMINIUM ALLOY FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION FORGINGS. (EUROPEAN STANDARD EN 2082-3).) |
| NF L10-702-1-1992 | 航空和航天系列.重熔产品和钢制、镍基和钴基合金制模件.技术规范.第1部分:一般要求.(欧洲标准 EN 2103-1) | (AEROSPACE SERIES. STEEL,NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 1 GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2103-1).) |
| NF L10-702-2-1992 | 航空和航天系列.重熔产品和钢制、镍基和钴基合金制模件.技术规范.第2部分:重熔产品.(欧洲标准 EN 2103-2) | (AEROSPACE SERIES. STEEL,NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 2 : REMELTING STOCK. (EUROPEAN STANDARD EN 2103-2).) |
| NF L10-702-3-1992 | 航空和航天系列.重熔产品和钢制、镍基和钴基合金制模件.技术规范.第3部分:标准部件及系列部件.(欧洲标准 EN | (AEROSPACE SERIES. STEEL,NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION CASTINGS. (EUROPEAN STANDARD EN 2103-3).) |
| NF L10-800-1-1994 | 航空航天系列.钛和钛合金.煅块和煅件.技术规范.第1部分:总要求 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOYS. FORGING STOCK AND FORGINS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2858-1).) |
| NF L10-800-2-1994 | 航空航天系列.钛和钛合金.煅块和煅件.技术规范.第2部分:锻块 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOYS. FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 2 : FORGING STOCK. (EUROPEAN STANDARD EN 2858-2).) |
| NF L10-800-3-1994 | 航空航天系列.钛和钛合金.煅块和煅件.技术规范.第3部分:预制煅件和锻件 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOYS. FORGING STOCK AND FORGINS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION FORGINGS. (EUROPEAN STANDARD EN 2858-3).) |
| NF L10-801-1-1995 | 航空和航天.钛和钛合金预制材料和铸件.交货技术条件.第1部分:一般要求 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2545-1).) |
| NF L10-801-2-1995 | 航空和航天.钛和钛合金预制材料和铸件.交货技术条件.第2部分:预制材料 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 2 : REMELTING STOCK. (EUROPEAN STANDARD EN 2545-2).) |
| NF L10-801-3-1995 | 航空和航天.钛和钛合金制预制材料和铸件.交货技术条件.第3部分:试制铸件和系列铸件 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION CASTINGS. (EUROPEAN STANDARD EN 2545-3).) |
| NF L10-805-1993 | 航空和航天.钛及钛合金碎屑的回收利用 | (AEROSPACE SERIES. RECYCLING OF TITANIUM AND TITANIUM ALLOY SCRAP. (EUROPEAN STANDARD EN 2955).) |
| NF L12-005-2002 | 航空航天系列.热轧圆钢棒.标称公差.直径D≤6mm 至 D≤250mm.尺寸 | (Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm inferior or equal to D inferior or equal to 250 mm - Dimensions.) |
| NF L12-006-2002 | 航空航天系列.热轧钢制圆形棒材.紧公差.直径D≥6mm至D≤ 250mm.尺寸 | (Aerospace series - Round bars, hot rolled in steel - Close tolerances - Diameter D more than or equal to 6 mm and less than or equal to 250 mm - Dimensions.) |
| NF L12-015-2002 | 航空航天系列.耐热合金加工的圆形棒材.直径D≥10mm 或者≤ 180mm.尺寸 | (Aerospace series - Round bars, machined in heat resisting alloys - Diameter D more than or equal to 10 mm and less than or equal to 180 mm - Dimensions.) |
| NF L12-135-2002 | 航空航天系列.耐热合金制成的热轧薄板和板材.厚度≥20mm 或者≤100mm.尺寸 | (Aerospaces series - Hot rolled sheets and plates in heat resisting alloys - Thickness a more than or equal to 2,0 mm and less than or equal to 100 mm - Dimensions.) |
| NF L12-610-1968 | 耐热钢和钢合金半成品冷拉无缝圆钢管.航空和航天工业选用 | (SELECTION OF COLD DRAWN SEAMLESS STEEL TUBES OF CIRCULAR CROSS-SECTION FOR THE AEROSPACE INDUSTRY.) |
| NF L12-612-2002 | 航空航天系列.耐热合金制成的无缝毛细管.直径≥0.6mm 或者≤ 2mm.尺寸 | (Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter D more than or equal to 0,6 mm and less than or equal to 2 mm - Dimensions.) |
| NF L12-671-2002 | 航空航天系列.耐腐蚀钢制成的流体用圆形管.直径≥3.2 或者≤100mm;厚度≥0.32 或者≤ 2.5mm.尺寸 | (Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter D more than or equal to 3,2 mm and less than or equal to 100 mm - Thickness a more than or equal to 0,32 mm and les) |
| NF L12-672-2002 | 航空航天系列.流体用耐热合金制成的圆形管材.直径D≥3.2mm 和≤100mm.尺寸 | (Aerospace series - Circular tubes, for fluid in heat resisting alloys - Diameter D more than or equal to 3,2 mm and less than or equal to 100 mm - Dimensions.) |
| NF L12-811-2001 | 航空航天系列.钢焊接用焊棒和焊丝.直径0.5mm≥D≥5.0mm.尺寸 | (Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm inferior or equal D inferior or equal 5,0 mm - Dimensions.) |
| NF L12-812-2002 | 航空航天系列.耐热合金焊接用填充杆材和填充金属丝.直径≥0.5mm 或者≤5.0mm .尺寸 | (Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.) |
| NF L13-100-1998 | 航空航天系列.镊基合金NI-B41201(NICR14S15B3C).钎焊金属.粉末和糊剂 | (Aerospace series. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Powder or paste.) |
| NF L13-101-1998 | 航空航天系列.镊基合金NI-B41201(NICR14S15B3C).钎焊金属.粉末和糊剂.带 | (Aerospace series. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Tape.) |
| NF L13-102-1998 | 航空航天系列.镊基合金NI-B41201(NICR14S15B3C).钎焊金属.粉末和糊剂.无定型箔 | (Aerospace series. Nickel base alloy NI-B41202 (NiCr14Si5B3). Filler metal for brazing. Amorphous foil.) |
| NF L13-103-2001 | 航空航天系列.镍基合金NI-B41202(NICR14Fe5Si5B3).钎焊用充填金属.粉末或糊剂 | (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste.) |
| NF L13-104-2001 | 航空航天系列.镍基合金NI-B41203(NICR7FeSi5B3).钎焊用充填金属.无定型箔 | (Aerospace series - Nickel base alloy NI-B41203 (NiCr7FeSi5B3) - Filler metal for brazing - Amorphous foil.) |
| NF L13-105-1998 | 航空航天系列.镊基合金NI-B41201(NICR14S15B3C).铅焊金属.粉末和糊剂.硼化箔 | (Aerospace series. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Borided foil.) |
| NF L13-106-2001 | 航空航天系列.镍基合金NI-B41203(NICR7Si5B3Fe3)钎焊用充填金属.粉末和糊剂 | (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste.) |
| NF L13-107-1998 | 航空航天系列.镊基合金NI-B41203(NICR7S15B3).钎焊金属.带 | (Aerospace series. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Tape.) |
| NF L13-108-2001 | 航空航天系列.镍基合金NI-B40001(NiSi5B3).钎焊用充填金属.无定型箔 | (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil.) |
| NF L13-109-2001 | 航空航天系列.镍基合金NI-B40001(NiSi5B3).钎焊用充填金属.硼化箔 | (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil.) |
| NF L13-110-2001 | 航空航天系列.镍基合金NI-B40001(NiSi5B3).钎焊用充填金属.粉末或糊剂 | (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste.) |
| NF L13-111-1998 | 航空航天系列.镊基合金NI-B40001(NISI5B3).钎焊金属.带 | (Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Tape.) |
| NF L13-112-2001 | 航空航天系列.镍基合金NI-B41001(NiCr19Si7B).钎焊用充填金属.无定型箔 | (Aerospace series - Nickel base alloy NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil.) |
| NF L13-113-2001 | 航空航天系列.镍基合金NI-B31001(NiCr19Si10).钎焊用充填金属.粉末或糊剂 | (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste.) |
| NF L13-114-1998 | 航空航天系列.镊基合金NI-B31001(NICR19SI10).钎焊金属.带 | (Aerospace series. Nickel base alloy NI-B31001 (NiCr19Si10). Filler metal for brazing. Tape.) |
| NF L13-115-2001 | 航空航天系列.镍基合金NI-B13001(NiP11).钎焊用充填金属.无定型箔 | (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil.) |
| NF L13-116-2001 | 航空航天系列.镍基合金NI-B13001(NiP11).钎焊用充填金属.粉末和糊状物 | (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Power or paste.) |
| NF L13-117-2001 | 航空航天系列.镍基合金NI-B21001(NiCr15B4).钎焊用充填金属.无定型箔 | (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil.) |
| NF L13-118-2001 | 航空航天系列.镍基合金NI-B21001(NiCr15B4).钎焊用充填金属.硼化箔 | (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil.) |
| NF L13-119-2001 | 航空航天系列.镍基合金NI-B21001(NiCr15B4).钎焊用充填金属.粉末或糊状物 | (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste.) |
| NF L13-120-2001 | 航空航天系列.镍基合金NI-B44101(NiW12Cr10Si4Fe3B3).钎焊用充填金属.粉末或糊状物 | (Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste.) |
| NF L13-122-2001 | 航空航天系列.镍基合金NI-B46001(NiCo20Si5B3).钎焊用充填金属.粉末或糊剂 | (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste.) |
| NF L13-123-1998 | 航空航天系列.镊基合金NI-B46001(NiCo20SI5B3).钎焊金属.带 | (Aerospace series. Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Tape.) |
| NF L13-124-2001 | 航空航天系列.镍基合金NI-B41204(NICR13Si4B3).钎焊用充填金属.无定型箔 | (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil.) |
| NF L13-125-2001 | 航空航天系列.镍基合金NI-B41204(NICR13Si4B3).钎焊用充填金属.硼化箔 | (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil.) |
| NF L13-126-2001 | 航空航天系列.镍基合金NI-B41204(NICR13Fe4Si4B3).钎焊用充填金属.粉末或糊剂 | (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste.) |
| NF L13-127-1998 | 航空航天系列.镊基合金NI-B41204(NICR13SI4B3).钎焊金属.带 | (Aerospace series. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Tape.) |
| NF L13-128-2001 | 航空航天系列.镍基合金NI-B48801(NiMn19Si6Cu4B).钎焊用充填金属.粉末或糊剂 | (Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste.) |
| NF L13-129-2001 | 航空航天系列.镍基合金NI-B15701(NiPd34Au30).钎焊用充填金属.粉末或糊剂 | (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste.) |
| NF L13-130-1998 | 航空航天系列.镊基合金NI-B15701(NIPD34AV30).钎焊金属.碾轧箔 | (Aerospace series. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Rolled foil.) |
| NF L13-131-1998 | 航空航天系列.镊基合金NI-B15701(NIPD34AV30).钎焊金属.线 | (Aerospace series. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Wire.) |
| NF L13-135-2001 | 航空航天系列.银基合金AG-B10001(AgCu28).钎焊用充填金属.焊丝 | (Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire.) |
| NF L13-136-2001 | 航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).钎焊用充填金属.焊丝 | (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire.) |
| NF L13-137-2001 | 航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).钎焊用充填金属.粉末或糊状物 | (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste.) |
| NF L13-138-2001 | 航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).钎焊用填充金属.卷状箔 | (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil.) |
| NF L13-139-2001 | 航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.焊丝 | (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire.) |
| NF L13-140-2001 | 航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.粉末或糊状物 | (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste.) |
| NF L13-141-2001 | 航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.卷状箔 | (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil.) |
| NF L13-142-2001 | 航空航天系列.钴基合金CO-B41601(CoCr19Ni17Si8W4).钎焊用填充金属.粉末或糊状物 | (Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste.) |
| NF L13-143-2001 | 航空航天系列.金基合金AU-B40001(AuNi18).钎焊用填充金属.粉末或糊状物 | (Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste.) |
| NF L13-144-2001 | 航空航天系列.金基合金AU-B40001.钎焊用填充金属.滚轧箔 | (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Rolled foil.) |
| NF L13-145-2001 | 航空航天系列.金基合金AU-B40001.钎焊用填充金属.金属丝 | (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire.) |
| NF L13-146-2001 | 航空航天系列.铜CU-BU9001.钎焊用填充金属.滚轧箔 | (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Rolled foil.) |
| NF L13-147-2001 | 航空航天系列.铜CU-BU9001.钎焊用填充金属.焊丝 | (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Wire.) |
| NF L13-148-2001 | 航空航天系列.钛合金TI-B17001.钎焊用填充金属.滚轧箔 | (Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil.) |
| NF L13-149-2001 | 航空航天系列.镍基合金NI-B40002(NiSi4B2).钎焊用填充金属.无定型箔 | (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil.) |
| NF L13-150-2001 | 航空航天系列.镍基合金NI-B40002(NiSi4B2).钎焊用填充金属.硼化箔 | (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil.) |
| NF L13-151-2002 | 航空航天系列.镍基合金NI-B40002 (NiSi4B2)- 钎焊用填充金属.粉末或焊膏. | (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Powder or paste.) |
| NF L13-152-1998 | 航空航天系列.镊基合金NI-B40002(NISI4B2).钎焊金属.带 | (Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Tape.) |
| NF L13-200-2001 | 航空航天系列.耐热合金NI-WH1801(NICR20Co18Ti3Al2).焊接用填充金属 | (Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding.) |
| NF L13-201-2001 | 航空航天系列.耐热合金NI-WH2301(NICR22Fe19Mo9Co2).焊接用填充金属 | (Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding.) |
| NF L13-202-2001 | 航空航天系列.耐热合金NI-WH2601(NICR19Nb5Mo3Ti).钎焊用填充金属 | (Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for brazing.) |
| NF L13-203-2001 | 航空航天系列.耐热合金NI-WH3601(NICR22Mo9Nb4).焊接用填充金属 | (Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding.) |
| NF L13-204-2001 | 航空航天系列.热阻合金NI-WH1303 (NiCo20Cr20Mo5Ti2Al).焊接用金属焊料 | (Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding.) |
| NF L13-205-2001 | 航空航天系列.耐热合金CO-WH4101(CoCr20W15Ni).焊接用填充金属 | (Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding.) |
| NF L13-206-2001 | 航空航天系列.耐热合金CO-WH1402(CoCr22Ni22W15).焊接用填充金属 | (Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding.) |
| NF L13-207-2002 | 航空航天系列.钢FE-WM3801(X5CrNiCu17-4).焊接用填充金属 | (Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding.) |
| NF L13-208-2002 | 航空航天系列.钢FE-WM1502(X11CrNiMoVN12-3).焊接用填充金属 | (Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding.) |
| NF L13-209-2001 | 航空航天系列.钛合金TI-W640001.焊接用填充金属 | (Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding.) |
| NF L13-210-2002 | 航空航天系列.钛合金TI-W19001.焊接用填充金属 | (Aerospace series - Titanium alloy TI-W19001- Filler metal for welding.) |
| NF L13-211-2001 | 航空航天系列.耐热合金NI-WD3201(NiMo25Fe6Cr5).焊接用填充金属 | (Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding.) |
| NF L13-212-2001 | 航空航天系列.耐热合金NI-WH3901(NiCr16Mo15).焊接用填充金属 | (Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding.) |
| NF L13-213-2002 | 航空航天系列.钢FE-WM1501 (X13CrNiMoCo12-3-2-2). 焊接用填充金属 | (Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding.) |
| NF L13-214-2002 | 航空航天系列.钢FE-WA4801(X6CrNiMnNb18-10).焊接用填充金属 | (Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding.) |
| NF L13-215-2002 | 航空航天系列.铝合金AL-W42201.焊接用填充金属.焊条 | (Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod.) |
| NF L13-216-2001 | 航空航天系列.耐热合金NI-WH1302(NICR20Co13Mo4Ti3Al).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod.) |
| NF L13-217-2001 | 航空航天系列.耐热合金CO-WH4102(CoCr28W20Ni5V1).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod.) |
| NF L13-218-2001 | 航空航天系列.耐热合金CO-WH1401(CoCr26Ni11W8).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod.) |
| NF L13-219-2002 | 航空航天系列.钢FE-WM1601 (X18CrWNi13-3-2).焊接填充金属.线材和棒材 | (Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod.) |
| NF L13-220-2001 | 航空航天系列.耐热合金NI-WH0001 (NiCr20).焊接用填充金属.焊丝和焊棒 | (Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod.) |
| NF L13-221-2002 | 航空航天系列.钢FE-WA4802 (X8CrNiMn27-22-2).焊接填充金属.线材和棒材 | (Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod.) |
| NF L13-222-2002 | 航空航天系列.钢FE-WL1804 (25CrMnMo4-2-2).焊接填充金属.线材和棒材 | (Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod.) |
| NF L13-223-2002 | 航空航天系列.钢FE-WL1805 (8CrMnMo12-4-9).焊接填充金属.线材和棒材 | (Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod.) |
| NF L13-224-2002 | 航空航天系列.钢 FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2).焊接填充金属.线材和棒材 | (Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod.) |
| NF L13-225-2002 | 航空航天系列.钢FE-WL1806 (15CrMnMoV5-4-9-3). 焊接用填充金属.焊丝和焊条 | (Aerospace series - Acier FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod.) |
| NF L13-226-2002 | 航空航天系列.钢FE-WA2602 (X4NiCrTiMoV26-15). 焊接用填充金属.焊丝和焊条 | (Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod.) |
| NF L13-227-2002 | 航空航天系列.钢FE-WA3801 (X4CrNiMn20-10-2). 焊接用填充金属.焊丝和焊条 | (Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod.) |
| NF L13-228-2001 | 航空航天系列.耐热合金NI-WH8901(NICR16Ti3Mn2).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding - Wire and rod.) |
| NF L13-229-2001 | 航空航天系列.耐热合金NI-WH3902 (NICR25Mo10C).焊接用填充金属.焊丝和焊棒 | (Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod.) |
| NF L13-230-2001 | 航空航天系列.耐热合金CO-WH4001(CoCr29W9).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod.) |
| NF L13-231-2002 | 航空航天系列.镁合金钢MG-W68001. 焊接用填充金属.焊丝和焊条 | (Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod.) |
| NF L13-232-2001 | 航空航天系列.铝合金AL-W46431.焊接用填充金属.金属丝和金属杆 | (Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod.) |
| NF L13-233-2001 | 航空航天系列.钛TI-W99001.焊接用填充金属.金属丝和金属杆 | (Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod.) |
| NF L13-234-2002 | 航空航天系列.钢FE-WM1001 (X13Cr12). 焊接用填充金属.焊丝和焊条 | (Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod.) |
| NF L13-235-2001 | 航空航天系列.钢FE-WM1002(X13Cr13).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod.) |
| NF L14-050-1993 | 航空航天系列.铝合金AL-P6082-T6.200mm以下或等于200mm的挤压棒材和型材A或D | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6082 - T6. EXTRUDED BARS AND SECTIONS A OR D INFERIOR OR EQUAL TO 200 MM. (EUROPEAN STANDARD EN 2326).) |
| NF L14-051-1994 | 航空航天系列.铝合金AL-P6082-T6.挤压棒材和型材.a/D≤200mm,周边粗粒控制 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6082-, T6. EXTRUDED BARS AND SECTIONS. A OR D INFERIOR OR EQUAL TO 200 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2636).) |
| NF L14-181-1993 | 航空航天系列.铝合金AL-P7009-T74.20mm以下或等于20mm至150mm以下或等于150mm的手工锻材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T74. HAND FORGINGS 20 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2093).) |
| NF L14-182-1993 | 航空航天系列.铝合金AL-P7009-T74.3mm以下或等于3mm至150mm以下或等于150mm的模锻材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T74. PIECES MATRICEES 3 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2094).) |
| NF L14-183-1993 | 航空航天系列.铝合金AL-P7009-T7452.40mm以下或等于40mm至150mm以下或等于150mm的手工锻材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T7452. HAND FORGINGS 40 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2381).) |
| NF L14-184-1993 | 航空航天系列.铝合金AL-P7009-T74511.125mm以下或等于125mm的挤压棒材和型材A或D | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T74511. EXTRUDED BARS AND SECTIONS A OR D INFERIOR OR EQUAL TO 125 MM. (EUROPEAN STANDARD EN 2385).) |
| NF L14-185-1994 | 航空航天系列.铝合金AL-P7009-T74511.挤压棒材和型材.a/D≤125mm,周边粗粒控制 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-, T74511. EXTRUDED BARS AND SECTIONS. A OR D INFERIOR OR EQUAL TO 125 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2630).) |
| NF L14-201-1994 | 航空航天系列.铝AL-P1050A.H14.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 | (AEROSPACE SERIES. ALUMINIUM AL-P1050A. H14. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2072).) |
| NF L14-204-1994 | 航空航天系列.铝合金AL-P7075-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-. T6 OR T62. CLAD SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2092).) |
| NF L14-207-1993 | 航空航天系列.铝合金AL-P7075-T651.6mm以下至80mm以下或等于80mm的铝合金板 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075 - T651. PLATES 6 MM INFERIOR TO A INFERIOR OR EQUAL TO 80 MM. (EUROPEAN STANDARD EN 2126).) |
| NF L14-208-1993 | 航空航天系列.铝合金AL-P7075-T73511.100mm以下或等于100mm的挤压棒材和型材A或D | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075 - T73511. EXTRUDED BARS AND SECTION A OR D INFERIOR OR EQUAL TO 100 MM. (EUROPEAN STANDARD EN 2127).) |
| NF L14-209-1993 | 航空航天系列.铝合金AL-P7075-T7351.6mm以下或等于6mm至75mm以下或等于75mm的冷拉铝棒 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075 - T7351. DRAW BARS 6 MM INFERIOR OR EQUAL TO A OR D INFERIOR OR EQUAL TO 75 MM. (EUROPEAN STANDARD EN 2128).) |
| NF L14-210-1994 | 航空航天系列.铝合金AL-P2024-T3511.挤压棒材和型材.a/D≤150mm,周边粗粒控制 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2024-, T3511. EXTRUDED BARS AND SECTIONS. 1,2 MM INFERIOR OR EQUAL TO A OR D INFERIOR OR EQUAL TO 150 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2633).) |
| NF L14-211-1994 | 航空航天系列.铝合金AL-P7075-T73511.挤压棒材和型材.a/D≤100mm,周边粗粒控制 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-, T73511. EXTRUDED BARS AND SECTIONS. A OR D INFERIOR OR EQUAL TO 100 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2632).) |
| NF L14-215-1994 | 航空航天系列.铝合金AL-P6061-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6061-. T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2694).) |
| NF L14-216-1994 | 航空航天系列.铝合金AL-P6081-.T6.0.3mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6081-. T6. SHEET AND STRIP. 0,3 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2695).) |
| NF L14-217-1994 | 航空航天系列.铝合金AL-P7075-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-. T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2696).) |
| NF L14-331-1994 | 航空航天系列.铝合金AL-P5086-.H111.0.3mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P5086-. H111. SHEET AND STRIP. 0,3 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2693).) |
| NF L14-401-1994 | 航空航天系列.铝合金AL-P2014A,T4或T42.薄板和带材.0.4MM≤A≤6MM | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A, T4 OR T42. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2395).) |
| NF L14-402-1993 | 航空航天系列.铝合金AL-P2014A,T4511.200mm以上或等于200mm的挤压棒材和型材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A - T4511. EXTRUDED BARS AND SECTIONS A OR D SUPERIOR OR EQUAL TO 200 MM. (EUROPEAN STANDARD EN 2100).) |
| NF L14-403-1994 | 航空航天系列.铝合金AL-P2014A,T6或T62.薄板和带材.0.4MM≤A≤6MM | (AREOSPACE SERIES. ALUMINIUM ALLOY AL-P2014A, T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2089).) |
| NF L14-405-1993 | 航空航天系列.铝合金AL-P2014A-T6511.150mm以下或等于150mm的挤压棒材和型材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A - T6511. EXTRUDED BARS AND SECTIONS A OR D INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2384).) |
| NF L14-422-1993 | 航空航天系列.铝合金AL-P2024-T3511.1.2mm以下或等于1.2mm至150mm以下或等于150mm的挤压棒材和型材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2024 - T3511. EXTRUDED BARS AND SECTIONS 1,2 MM INFERIOR OR EQUAL TO A OR D INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2318).) |
| NF L14-701-1982 | CuNi3si铜合金.航天制造用棒材 | (COPPER ALLOY BARS (CUNI3SI) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-702-1982 | CuNi１４Al２铜合金.航天制造用棒材 | (COPPER ALLOY BARS (CUNI14AL2) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-703-1982 | CuSn８.５P 铜合金.航天制造用棒材 | (COPPER ALLOY BARS (CUSN8.5P) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-706-1982 | CuALIlNi５Fe５铜合金.航天制造用棒材 | (COPPER ALLOY BARS (CUAL11NI5FE5) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-707-1982 | CuZn19Al6铜合金.航天制造用棒材 | (COPPER ALLOY CUZN19AL6. BARS FOR AEROSPACE USE.) |
| NF L14-708-1982 | CuZn２３Al４铜合金.航天制造用棒材 | (COPPER ALLOY BARS (CUZN23AL4) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-709-1982 | CuBe1.9 铜合金航天制造用棒材 | (COPPER ALLOY BARS (CUBE1.9) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-710-1983 | CuZn３９Pb１.７ 铜合金.航天制造用棒材 | (COPPER ALLOY BARS (CUZN39PB1.7) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-711-1983 | CuZn３６Ni２铜合金.航天制造用棒材 | (COPPER ALLOY BARS (CUZN36NI2) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-720-1983 | CuBl铜合金.航天制造用板材和带材 | (COPPER ALLOY SHEET AND STRIP (CU-B-1) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-721-1983 | CuBe１.９ 铜合金.航天制造用板材和带材 | (COPPER ALLOY SHEET AND STRIP (CUBE1.9) FOR AEROSPACE CONSTRUCTION.) |
| NF L15-120-2002 | 航空航天系列.铝及铝合金板.厚度≥0.25mm和厚度≤6mm.尺寸 | (Aerospace series - Sheets, in aluminium and aluminium alloys - Thickness a more than or equal to 0,25 mm and less than or equal to 6 mm - Dimensions.) |
| NF L15-125-2002 | 航空航天系列.铝合金板.厚度为6mm〈a≤160mm.尺寸 | (Aerospace series - Plates in aluminium alloys - Thickness 6 mm inferior to a inferior or equal to 160 mm - Dimensions.) |
| NF L15-131-2002 | 航空航天系列.钛合金冷轧薄板材.厚度大于等于0.2 mm 和小于等于6 mm.尺寸 | (Aerospace series - Sheets, cold rolled in titanium alloys - Thickness a more than or equal to 0,2 mm and less than or equal to 6 mm - Dimensions.) |
| NF L15-132-2002 | 航空航天系列.钛合金冷轧薄板材.厚度大于等于0.2 mm 和小于等于6 mm.尺寸 | (Aerospace series - Sheets, hold rolled in titanium alloys - Thickness a more than or equal to 0,2 mm and less than or equal to 6 mm - Dimensions.) |
| NF L15-135-2002 | 航空航天系列.钛和钛合金板材.厚度大于等于6mm 和小于等于100mm.尺寸 | (Aerospace series - Plates in titanium and titanium alloys - Thickness a more than or equal to 6 mm and less than or equal to 100 mm - Dimensions.) |
| NF L15-155-2001 | 航空航天系列.铝和铝合金带.厚度≤0.25mm至≤3.2mm.尺寸 | (Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm inferior or equal to a inferior or equal to 3,2 mm - Dimensions.) |
| NF L15-313-2002 | 航空航天系列.铝及铝合金拉制圆棒材.公差等级h11.直径4mm≤ D≤63mm.尺寸 | (Aerospace series - Round bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm inferior or equal to D inferior or equal to 63 mm - Dimensions.) |
| NF L15-315-2002 | 航空航天系列.铝及铝合金挤制圆棒材.直径10mm≤ D ≤ 220mm.尺寸 | (Aerospaces series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm inferior or equal to D inferior or equal to 220 mm - Dimensions.) |
| NF L15-316-2002 | 航空航天系列.钛和钛合金圆棒.直径D≥6mm 和D≤160mm.尺寸 | (Aerospace series - Round bars in titanium and titanium alloys - Diameter D more than or equal to 6 mm and less than or equal to 160 mm - Dimensions.) |
| NF L15-325-2002 | 航空航天系列.铝及铝合金拉制六角形棒材.公差等级h11.对边宽度 7mm≤ a ≤ 63mm.尺寸 | (Aerospace series - Hexagonal bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm inferior or equal to a inferior or equal to 63 mm - Dimensions.) |
| NF L15-335-2002 | 航空航天系列.铝及铝合金拉制方形棒材.公差等级h11.直径 6mm≤ D ≤50mm.尺寸 | (Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 6 mm inferior or equal to D inferior or equal to 50 mm - Dimensions.) |
| NF L15-515-2001 | 航空航天系列.铝合金挤压L型材.尺寸 | (Aerospace series - Extruted L-section, in aluminium alloys - Dimensions.) |
| NF L15-525-2001 | 航空航天系列.铝合金串珠式挤压L型材.尺寸 | (Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions.) |
| NF L15-535-2001 | 航空航天系列.铝合金挤压槽型断面.尺寸 | (Aerospace series - Extruded channel section in aluminium alloys - Dimensions.) |
| NF L15-545-2001 | 航空航天系列.铝合金挤压T型材.尺寸 | (Aerospace series - Extruded T-section, in aluminium alloys - Dimensions.) |
| NF L15-555-2002 | 航空航天系列.铝合金挤制型材.一般公差 | (Aerospace series - Extruted section in aluminium alloys - General tolerances.) |
| NF L15-650-1997 | 航天航空系列.铝及铝合金结构用圆管.直径6MM≤D≤10MM.厚度1MM≤A≤6MM.尺寸(欧洲标准EN 2257) | (Aerospace series. Circular tubes for structures in aluminium and aluminium alloys. Diameter 6 mm inferior or equal to D inferior or equal to 100 mm. Thickness 1 mm inferior or equal to a inferior or equal to 6 mm. Dimensions.) |
| NF L15-651-1997 | 航天航空系列.流体用铝及铝合金圆管.直径3.2MM≤D≤100MM.厚度0.6MM≤A≤2.5MM.尺寸(欧洲标准EN 2258) | (Aerospace series. Circular tubes for fluids in aluminium and aluminium alloys. Diameter 3,2 mm inferior or equal to D inferior or equal to 100 mm. Thickness 0,6 mm inferior or equal to a inferior or equal to 2,5 mm. Dimensions.) |
| NF L15-675-2002 | 航空航天系列.流体用钛及钛合金圆管.宽度公差.直径4mm≤ D≤ 40mm.尺寸 | (Aerospace series - Circular tubes, fir fluid in titanium alloys - Wide tolerances - Diameter 4 mm inferior or equal to D inferior or equal to 40 mm - Dimensions.) |
| NF L15-811-2002 | 航空航天系列.焊接钛和钛合金用填充杆和填充焊丝.直径 D≥0.5mm 和D≤5.0mm .尺寸 | (Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameters D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.) |
| NF L16-001-1991 | 航空航天系列.涂料和清漆.铝合金试样表面预加工的方法和类型 | (AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN ALUMINIUM ALLOYS.) |
| NF L16-002-1991 | 航空航天系列.涂料和清漆.镁合金试样表面预加工的方法和类型 | (AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN MAGNESIUM ALLOYS.) |
| NF L16-003-1991 | 航空航天系列.涂料和清漆.钛合金试样表面预加工的方法和类型 | (AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN TITANIUM ALLOYS.) |
| NF L16-004-1991 | 航空航天系列.涂料和清漆.不锈钢试件表面的性质和准备方法 | (AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN CORROSION RESISTING STEEL.) |
| NF L16-005-1991 | 航空航天系列.涂料和清漆.钢制试样表面预加工的方法和类型 | (AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN STEEL.) |
| NF L16-101-1997 | 航空和航天系列.涂料和清漆的试验方法.耐铝合金线性腐蚀的检验 | (Aerospace series. Test methods for paints and varnishes. Filiform corrosion resistance test on aluminium alloys.) |
| NF L16-105-1996 | 航空航天系列.涂料和清漆.在阻尼氯化纳溶剂中用更换浸渍试验测定耐蚀性 | (Aerospace series. Paints and varnishes. Corrosion test by alternate immersion in a buffered sodium cloride solution.) |
| NF L16-106-1990 | 航空航天工业.涂料和清漆.抗水性的测定.用无矿质水浸渍法 | (AEROSPACE INDUSTRY. PAINTS AND VARNISHES. DETERMINATION OF THE WATER RESISTANCE. METHOD BY IMMERSION IN DE-IONIZED WATER.) |
| NF L16-109-1992 | 航空航天系列.色漆和清漆.耐湿热性能 | (AEROSPACE SERIES. PAINTS AND VARNISHES. RESISTANCE TO DAMP HEAT.) |
| NF L17-001-1993 | 航空航天系列.规定有效期的非金属半成品.一般规范 | (AEROSPACE INDUSTRY. NON-METALLIC SEMI-FINISHED PRODUCTS WITH LIMITED VALIDITY IN TIME. GENERAL SPECIFICATIONS.) |
| NF L17-005-1992 | 航空航天系列.非金属材料.优选试验温度 | (Aerospace series. Non-metallic materials. Preferred test temperatures.) |
| NF L17-020-1996 | 航空航天系列.非金属材料.液相色谱法特性(高性能液相色谱法.静挤压色层分离法).分类法 | (AEROSPACE SERIES. NON-METALLIC MATERIALS. LIQUID CHROMATOGRAPHY CHARACTERIZATION (HIGH PERFORMANCE LIQUID CHROMATOGRAPHY. STERIC EXCLUSION CHROMATOGRAPHY). GENERAL METHODOLOGY.) |
| NF L17-021-1998 | 航空航天系列.非金属材料.树脂,粘接剂,增强塑料,预浸渍.用液相色谱测定特性 | (AEROSPACE SERIES. NON-METALLIC MATERIALS. RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.) |
| NF L17-022-1999 | 航空航天系列.非金属材料.油类、液压油和燃料.液体层析法特征 | (AEROSPACE SERIES. NON-METALLIC MATERIALS. OILS, HYDRAULIC FLUIDS, FUELS. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.) |
| NF L17-126-1999 | 航空航天系列.橡胶.氢化丁二烯-丙烯腈.26类.性能 | (AEROSPACE SERIES. RUBBER. BUTADIENE-ACRYLONITRILE, HYDROGENATED. CLASS 26. CHARACTERISTICS.) |
| NF L17-127-1996 | 航空和航天.丙烯腈-丁二烯-橡胶(NBR).硬度:40 IRHD | (AEROSPACE SERIES. ACRYLONITRILE-BUTADIENE RUBBER (NBR). HARDNESS 40 IRHD. (EUROPEAN STANDARD EN 2104).) |
| NF L17-154-1996 | 航空航天系列.硅橡胶.54类.特性 | (AEROSPACE SERIES. SILICONE RUBBERS. CLASS 54. CHARACTERISTICS.) |
| NF L17-165-1996 | 航空航天系列.氟碳橡胶.65类.特性 | (AEROSPACE SERIES. FLUOROCARBON RUBBERS. CLASS 65. CHARACTERISTICS.) |
| NF L17-206-1998 | 航空航天系列.橡胶化合物.技术规范 | (AEROSPACE SERIES. RUBBER COMPOUNDS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 3207).) |
| NF L17-241-1996 | 航空航天系列.乙烯.丙烯橡胶.41类.特性 | (Aerospace series. Ethylene. Propylene rubbers. Class 41. Characteristics.) |
| NF L17-242-1-1996 | 航空和航天.乙丙橡胶(EPM/EPDM).硬度:50 IRHD | (Aerospace series. Ethylene-propylene rubber (epm/epdm). Hardness 50 irhd.) |
| NF L17-242-2-1996 | 航空航天系列.乙丙橡胶(EPM/EPDM).硬度:60 IRHD | (AEROSPACE SERIES. ETHYLENE-PROPYLENE RUBBER (EPM/EPDM). HARDNESS 60 IRHD. (EUROPEAN STANDARD EN 2429).) |
| NF L17-242-3-1996 | 航空航天系列.乙丙橡胶(EPM/EPDM).硬度:70 IRHD | (AEROSPACE SERIES. ETHYLENE-PROPYLENE RUBBER (EPM/EPDM). HARDNESS 70 IRHD. (EUROPEAN STANDARD EN 2430).) |
| NF L17-242-4-1996 | 航空航天系列.乙丙橡胶(EPM/EPDM).硬度:80 IRHD | (AEROSPACE SERIES. ETHYLENE-PROPYLENE RUBBER (EPM/EPDM). HARDNESS 80 IRHD. (EUROPEAN SANDARD EN 2431).) |
| NF L17-242-5-1996 | 航空航天系列.乙丙橡胶(EPM/EPDM).硬度:90 IRHD | (AEROSPACE SERIES. ETHYLENE-PROPYLENE RUBBER (EPM/EPDM). HARDNESS 90 IRHD. (EUROPEAN STANDARD EN 2432).) |
| NF L17-250-1-1996 | 航空航天系列.硅橡胶.50D4类.特性 | (AEROSPACE SERIES. SILICONE RUBBERS. CLASS 50 D 4. CHARACTERISTICS.) |
| NF L17-250-2-1996 | 航空和航天.硅橡胶(VMQ).硬度:50 IRHD(国际橡胶硬度标度) | (Aerospace series. Silicone rubber (vmq). Hardness 50 irhd.) |
| NF L17-250-3-1996 | 航空和航天.硅树脂橡胶(VMQ).硬度:60 IRHD | (Aerospace series. Silicone rubber (vmq). Hardness 60 irhd.) |
| NF L17-250-4-1996 | 航空和航天.硅树脂橡胶(VMQ).硬度:70 IRHD | (Aerospace series. Silicone rubber (vmq). Hardness 70 irhd.) |
| NF L17-250-5-1996 | 航空航天系列.硅橡胶.50D8类.特性 | (AEROSPACE SERIES. SILICONE RUBBERS. CLASS 50 D 8. CHARACTERISTICS.) |
| NF L17-250-6-1996 | 航空和航天.高撕裂强度的硅合成橡胶(VMQ/PVMQ).硬度:50 IRHD | (Aerospace series. Silicone rubber (vmq/pvmq) with high tear strenght. Hardness 50 irhd.) |
| NF L17-261-1996 | 航空航天系列.硅氟橡胶.61类.特性 | (Aerospace series. Fluorosilicone rubbers. Class 61. Characteristics.) |
| NF L17-300-2-1991 | 航空航天系列.结构胶粘剂.试验方法.第2部分:金属-金属脱落试验.(欧洲标准 EN 2243-2) | (Aerospace series. Structural adhesives. Test methods. Part 2 : peel metal-metal.) |
| NF L17-300-3-1992 | 航空航天系列.结构粘结剂.试验方法.第3部分:金属蜂窝板化学去壳试验(欧洲标准 EN 2243-2) | (Aerospace series. Structural adhesives. Test methods. Part 3 : peeling test metal-honeycomb core.) |
| NF L17-300-4-1991 | 航空航天系列.结构粘合剂.试验方法.第4部分:蜂状金属包体垂直拉力试验 | (Aerospace series. Structural adhesives. Test methods. Part 4 : metal-honeycomb core flatwise tensile test.) |
| NF L17-300-5-1992 | 航空航天系列.结构胶粘剂.试验方法.第5部分:老化试验 | (Aerospace series. Structural adhesives. Test methods. Part 5 : ageing tests.) |
| NF L17-301-1998 | 航空航天系列.非金属材料.结构胶粘剂.试验方法.低漆厚度的测定 | (AEROSPACE SERIES. NON-METALLIC MATERIALS. STRUCTURAL ADHESIVES. TEST METHODS. DETERMINATION OF THE PRIMER THICKNESS. (EUROPEAN STANDARD EN 2781).) |
| NF L17-310-6-2002 | 航空航天系列.非金属材料.泡沫结构粘合剂.试验方法.第6部分:吸水性的测定 | (Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 6 : determination of water absorption.) |
| NF L17-403-2002 | 航空航天系列.纤维增强塑料.未老化材料测试前整理的标准程序 | (Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials.) |
| NF L17-409-1998 | 航空航天系列.碳素纤维增强塑料.单向分层.垂直于纤维方向的拉伸试验 | (Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction.) |
| NF L17-410-1996 | 航空和航天.碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验 | (Aerospace series. Carbon fibre reinforced plastics. Unidirectioneal laminates. Tensile test parallel to the fibre direction.) |
| NF L17-413-1998 | 航空航天系列.碳素纤维层压材料.纤维.树脂和空隙量的测定 | (AEROSPACE SERIES. CARBON FIBRE LAMINATES. DETERMINATION OF THE FIBRE, RESIN AND VOID CONTENTS. (EUROPEAN STANDARD EN 2564).) |
| NF L17-420-1997 | 航天航空系列.碳纤维增强保混剂.每单位面积质量的测定(欧洲标准EN 2557) | (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF MASS PER UNIT AREA. (EUROPEAN STANDARD EN 2557).) |
| NF L17-421-1997 | 航天航空系列.碳纤维增强保混剂.挥发性物质含量的测定(欧洲标准EN 2558) | (Aerospace series. Carbon fibre preimpregnates. Determination of the volatile content.) |
| NF L17-422-1997 | 航天航空系列.碳纤维增强保混剂.树脂、纤维含量和每单位面积纤维质量的测定(欧洲标准EN 2559) | (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN AND FIBRE CONTENT AND THE MASS OF FIBRE PER UNIT AREA. (EUROPEAN STANDARD EN 2559).) |
| NF L17-451-1988 | 航空和航天.热固性树脂预浸材料.差示热切析.试验方法 | (Aerospace. Fabrics pre-impregnated with thermosetting resin. Differential scanning calorimetry. Test method.) |
| NF L17-452-1988 | 航空和航天.热固性树脂预浸织物.耐垂直拉伸强度试验 | (Aerospace. Fabric pre-impregnated with thermosetting resin. Perpendicular tensile resistance test.) |
| NF L17-454-1998 | 航空航天系列.预浸渍碳素纤维.树脂流测定 | (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN FLOW. (EUROPEAN STANDARD EN 2560).) |
| NF L17-455-1988 | 航空和航天.热固性树脂预浸合成材料.耐剥离强度试验 | (Aerospace. Thermosetting resins, prepreg based composite materials. Peel strength.) |
| NF L17-458-1996 | 航空和航天.纤维增强塑料.试验液体影响的测定 | (Aerospace series. Fibre reinforced plastics. Determination of the action of test fluids.) |
| NF L17-459-1996 | 航空和航天.纤维增强塑料.通过浸入测定吸水量 | (Aerospace series. Fibre reinforced plastics. Determination of water absorption by immersion.) |
| NF L17-461-1993 | 航空航天系列.聚脂胶片.粘度的测定 | (AEROSPACE SERIES. PREPREGS. DETERMINATION OF TACKNESS.) |
| NF L17-600-05-1989 | 航空航天系列.飞行器玻璃窗透明材料试验方法.第5部分:可见光透射测定(EN 2155-5) | (Aerospace industry. Test methods for transparent materials for aircraft glazing. Part 5 : determination of visible light transmission.) |
| NF L17-600-08-1989 | 航空航天系列.飞行器玻璃窗透明材料试验方法.第8部分:光学畸变测定(EN 2155-8) | (Aerospace industry. Test methods for transparent materials for aircraft glazing. Part 8 : determination of optical distortion.) |
| NF L17-600-09-1989 | 航空航天系列.飞行器玻璃窗透明材料试验方法.第9部分:薄雾测定(EN 2155-9) | (Aerospace industry. Test methods for transparent materials for aircraft glazing. Part 9 : determination of haze.) |
| NF L17-600-12-1997 | 航空航天系列.飞机玻璃透明材料的试验方法.第12部分:线性热膨胀的测定(EN 2155-12) | (Aerospace series. Test methods for transparent materials for aircraft glazing. Part 12 : determination of linear thermal expansion.) |
| NF L17-600-13-1993 | 航空航天系列.飞机窗用透明材料的试验方法.第13部分:在由负荷引起偏差时温度的测定(欧洲标准 EN 2155-13) | (Aerospace series. Test methods for transparent materials for aircraft glazing. Part 13 : determination of temperature at deflection under load.) |
| NF L17-600-14-1993 | 航空航天系列.飞机窗用透明材料的试验方法.第14部分:1/10维卡软化温度的测定(EN 2155-14) | (Aerospace series. Test methods for transparent materials for aircraft glazing. Part 14 : determination of the 1/10 vicat softening temperature.) |
| NF L17-600-19-1996 | 航空航天系列.飞机玻璃窗用透明材料的试验方法.第19部分:抗裂纹出现性能的测定(欧洲标准EN 2155-19) | (Aerospace series. Test methods for transparent materials for aircraft glazing. Part 19 : determination of craze resistance.) |
| NF L17-600-2-1993 | 航空航天系列.航空器上釉透明材料的试验方法.第2部分:水吸收的测定(EN 21552) | (Aerospace series. Test mthods for transparent materials for aircraft glazing. Part 2 : determination of water absorption.) |
| NF L17-600-3-1993 | 航空航天系列.航空器上釉透明材料的试验方法.第3部分:折射系数的测定 | (Aerospace series. Test methods for transparent materials for aircraft glazing . Part 3 : determination of refractive index.) |
| NF L17-600-7-1997 | 航空和航天.飞机上镶玻璃用透明材料的检验方法.第7部分:光偏移的测定(EN 2155-7) | (Aerospace series. Test methods for transparent materials for aircraft glazing. Part 7 : determination of optical deviation.) |
| NF L17-700-1991 | 航空和航天系列.用玻璃纤维和夹层混合材料加固的层压材料.试验板的制作.(欧洲标准 EN 2374) | (Aerospace series. Glass fibre reinforced mouldings and sandwich composites. Production of test panels.) |
| NF L17-702-1992 | 航空航天系列.树脂预浸渍材料.生产批抽样程序 | (AEROSPACE SERIES. RESIN PREIMPREGNATED MATERIALS. PRODUCTION BATCH SAMPLING PROCEDURE. (EUROPEAN STANDARD EN 2375).) |
| NF L17-703-1998 | 航空航天系列.玻璃纤维增强塑料.挠性试验.三点弯曲试验 | (Aerospace series. Glass fibre reinforced plastics. Flexural test. Three point bend method.) |
| NF L17-704-1998 | 航空航天系列.玻璃纤维增强塑料.拉伸试验 | (Aerospace series. Glass fibre reinforced plastics. Tensile test.) |
| NF L17-721-1993 | 航空航天系列.纺织玻璃纤维预浸渍.测定单位面积质量的试验方法 | (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA. (EUROPEAN STANDARD EN 2329).) |
| NF L17-722-1993 | 航空航天系列.纺织玻璃纤维预浸渍.测定挥发物含量的试验方法 | (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE CONTENT OF VOLATILE MATTER. (EUROPEAN STANDARD EN 2330).) |
| NF L17-723-1993 | 航空航天系列.纺织玻璃纤维预浸渍.测定树脂和橡胶含量及单位面积纤维质量的试验方法 | (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE RESIN AND FIBRE CONTENT AND MASS OF FIBRE PER UNIT AREA. (EUROPEAN STANDARD EN 2331).) |
| NF L17-724-1993 | 航空航天系列.纺织玻璃纤维预浸渍.测定树脂流的试验方法 | (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE RESIN FLOW. (EUROPEAN STANDARD EN 2332).) |
| NF L17-750-1992 | 航空航天系列.高机械性能的玻璃粗纱.一般技术规范 | (AEROSPACE SERIES. GLASS ROVINGS WITH HIGH MECHANICAL PROPERTIES. GENERAL TECHNICAL SPECIFICATION.) |
| NF L17-751-1992 | 航空航天系列.R-玻璃粗纱.产品标准.RC10 80 P9HT标准基础上粗纱 | (AEROSPACE SERIES. R-GLASS ROVINGS. PRODUCT STANDARD. ROVINGS ON THE BASIS OF STRANDS RC10 80 P9HT.) |
| NF L17-752-1992 | 航空航天系列.R-玻璃纤维束.产品标准.以标准RC14 160 P109为基础的玻璃纤维束 | (AEROSPACE SERIES. R-GLASS ROVINGS. PRODUCT STANDARD. ROVINGS ON THE BASIS OF STRANDS RC14 160 P109.) |
| NF L17-780-1992 | 航空航天系列.自行设备.底板绞线的等拉伸力测量 | (AEROSPACE SERIES. ROWINGS. MEASUREMENT OF THE EQUITENSION OF THE BASE STRANDS.) |
| NF L17-781-1992 | 航空航天系列.纤维束.G起重性的测定 | (AEROSPACE SERIES. ROVINGS. DETERMINATION OF THE FUZZ.) |
| NF L17-900-1998 | 航空航天系列.降落伞织物.机械规范起草指南 | (AEROSPACE SERIES. PARACHUTE FABRIC. GUIDELINES FOR THE DRAFTING OF TECHNICAL SPECIFICATIONS.) |
| NF L17-900-2003 | 航空航天系列.降落伞织物.技术规范起草指南 | (Aerospace series - Parachute fabric - Guidelines for the drafting of technical specifications.) |
| NF L17-910-1994 | 航空航天系列.降落伞织物.飞机翼布透气性的测定 | (Aerospace series. Textiles for parachutes. Determination of the air permeability of wing fabrics.) |
| NF L17-911-1994 | 航空航天系列.降落伞.纺织物.布带和胶带的试验.耐磨试验方法 | (AEROSPACE SERIES. PARACHUTES. TEXTILES. TESTING OF STRAPS AND TAPES. TEST METHOD FOR ABRASIVE WEAR.) |
| NF L17-913-1994 | 航空和航天系列.降落伞用织物.扭编部分的试验.直径或宽度和厚度和单位长度质量的测定 | (AEROSPACE SERIES. TEXTILES FOR PARACHUTES. TESTS ON BRAIDED PARTS. DETERMINATION OF THE DIAMETER OR WIDTH AND THICKNESS AND THE LINEAR MASS.) |
| NF L17-914-1995 | 航空航天系列.降落伞织物.布带和胶带的试验.曲度的测定 | (AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF STRAPS AND TAPES. DETERMINATION OF CURVATURE.) |
| NF L17-915-1995 | 航空航天系列.降落伞织物.布带和胶带的试验.扭接的测定 | (AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF TAPES AND STRAPS. DETERMINATION OF KINKING.) |
| NF L17-916-1995 | 航空航天系列.降落伞纤维.扭编绳的试验.锥形细纱球的数目的测定 | (AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF BRAIDED ROPE. DETERMINATION OF THE NUMBER OF YARN COPS.) |
| NF L17-917-1995 | 航空航天系列.降落伞纤维.扭编绳的试验.网织品的检测 | (AREOSPACE SERIES. PARACHUTE FABRIC. TESTING OF BRAIDED ROPE. DETERMINATION OF MESHWORK.) |
| NF L17-918-1997 | 航空航天系列.降落伞纤维.扭编绳/编带和窄幅织物的试验.浸入冷水后尺寸变化的测定 | (AEROSPACE SERIES. PARACHUTE FABRIC. TESTS ON BRAIDED ROPES/BRAIDS AND NARROW FABRICS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER IMMERSION IN COLD WATER.) |
| NF L17-919-1998 | 航空航天系列.编织材料试验.2/3拉力下断裂负载的测定 | (AEROSPACE SERIES. TESTS ON BRAIDED ARTICLES. DETERMINATION OF THE BREAKING LOAD UNDER TRACTION AT 2/3 EXTENSION.) |
| NF L17-920-1999 | 航空航天系列.降落伞织物.布带和胶带的试验.连接长度和刚性的测定 | (AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF STRAPS AND TAPES. DETERMINATION OF THE BENDING LENGTH AND RIGIDITY.) |
| NF L18-130-1995 | 航空航天系列.胶合板.供料规范和试验方法 | (Aerospace series. Wood based panels. Procurement specification and test methods.) |
| NF L19-003-1992 | 航空航天系列.元件和非金属材料中的管腔蜂窝状材料 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS IN COMPONENT AND NON-METALLIC MATEIRALS. GENERALITIES.) |
| NF L19-031-1993 | 航空航天系列.管状单元,六角形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 | (AEROSPACE SERIES. HONEYCOMB MATERIAL WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-032-1993 | 航空航天系列.管状单元,矩形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-033-1993 | 航空航天系列.管状单元,挠性,玻璃纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-034-1992 | 航空航天系列.蜂窝状材料.六方管腔.聚酰胺芳族纸,酚醛树脂浸渍的.标准产品 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-035-1993 | 航空航天系列.管状单元、矩形、聚酰胺芳族纸和酚醛树脂浸渍的蜂窝型材料.产品标准 | (AREOSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-036-1993 | 航空航天系列.管状单元、挠性、聚酰胺芳族纸和酚醛树脂浸渍的蜂窝型材料.产品标准 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-037-1993 | 航空航天系列.管状单元,六角形,碳纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL CARBON FABRIC, PHENOLIC RESIN IMPREGNATED ORIENTED AT PLUS OVER MINUS. PRODUCT STANDARD.) |
| NF L19-040-1993 | 航空航天系列.管状单元,六角形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料,正负45度取向.产品标准 | (AEROSPACE SERIES. HONEYCOMB MATERIALS TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-041-1993 | 航空航天系列.管状单元,矩形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料,正负45度取向.产品标准 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-043-1993 | 航空航天系列.管状单元,六角形,牛皮纸,酚醛树脂浸渍的蜂窝状材料.产品标准 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, KRAFT PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-046-1993 | 航空航天系列.管状单元,六角形,玻璃纤维,聚酰亚胺树脂浸渍的蜂窝状材料,正负45度取向.产品标准 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, POLYMIMIDE RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-101-1-1992 | 航空和航天.用铝合金制的管形隔间器材.技术规范.一般要求 | (AEROSPACE SERIES. HONEYCOMB MATEIRALS WITH TUBULAR CELLS IN ALUMINIUM ALLOYS. TECHNICAL SPECIFICATION. GENERAL REQUIREMENTS.) |
| NF L19-101-2-1992 | 航空和航天.用铝合金制的管形隔间器材.技术规范.六边形管形元件的特殊要求 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS IN ALUMINIUM ALLOYS. TECHNICAL SPECIFICATION. SPECIAL REQUIREMENTS FOR HEXAGONAL TUBULAR CELLS.) |
| NF L19-103-1992 | 航空航天系列.复合的非金属热固性塑料浸渍材料.带管状心的蜂窝材料.技术规格.一般要求 | (AREROSPACE SERIES. COMPOSITE AND NON-METALLIC THERMOPLASTIC IMPREGNATED MATERIALS. HONEYCOM MATERIALS WITH TUBULAR CELLS. TECHNICAL SPECIFICATION. GENERAL REQUIREMENTS.) |
| NF L19-106-1995 | 航空航天系列.研磨用的管状多孔材料.技术规范 | (AEROSPACE SERIES. HONEYCOMB MATERIAL WITH TUBULAR CELLS FOR ABRADABLE APPLICATIONS. TECHNICAL SPECIFICATION.) |
| NF L20-010-1989 | 航空和航天.设备.NFE系列紧固件的选择 | (AEROSPACE SERIES. EQUIPMENT. CHOICE OF FASTENERS,NF E SERIES.) |
| NF L20-020-1989 | 航空和航天系列.铆钉孔的尺寸 | (AEROSPACE SERIES. HOLE SIZES FOR SOLID RIVETS. (EUROPEAN STANDARD EN 2309).) |
| NF L20-021-1995 | 航空航天系列.T型头螺栓孔和夹子的设计标准 | (AEROSPACE SERIES. HOLES AND TRAPS FOR T-HEAD BOLTS DESIGN STANDARD. (EUROPEAN STANDARD EN 3202).) |
| NF L20-026-1995 | 航空航天系列.插销.尺寸和接头选择.设计标准 | (Aerospace series. Spigots. Dimensions and fit selection. Design standard.) |
| NF L20-030-1996 | 航空航天系列.带柄螺母.60度型铁法兰安装孔.设计标准(欧洲标准EN 3149) | (AEROSPACE SERIES. SHANK NUTS. INSTALLATION HOLES, 60 DEGREES SWAGE, FLANGES. DESIGN STANDARD. (EUROPEAN STANDARD EN 3149).) |
| NF L21-311-1993 | 航空航天系列.铆钉,固体.通用头,铝1050A,英寸系列(EN 2143) | (AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2143).) |
| NF L21-314-1993 | 航空航天系列.铆钉,固体.通用头,铝合金2017A,英寸系列(EN 2146) | (AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2146).) |
| NF L21-316-1993 | 航空航天系列.铆钉,固体.通用头,铝合金5056A,英寸系列(EN 2148) | (AEROSPACES SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2148).) |
| NF L21-321-1993 | 航空航天系列.铆钉,固体,100级常规扩钻头,铝1050A,英寸系列(EN 2550) | (AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A,INCH BASED SERIES. (EUROPEAN STANDARD EN 2550).) |
| NF L21-322-1993 | 航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金2117A,英寸系列(EN 2551) | (AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES. (EUROPEAN STANDARD EN 2551).) |
| NF L21-324-1993 | 航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金2017A,英寸系列(EN 2553) | (AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2553).) |
| NF L21-326-1993 | 航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金5056A, 英寸系列(EN 2555) | (AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2555).) |
| NF L21-327-1993 | 航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金5056A, 阳极氧化处理和铬酸处理,英寸系列(EN 2556) | (AEROSPACE SEREIS. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 2556).) |
| NF L21-416-2001 | 航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度沉头标称凸头的实心铆钉 | (Aerospace series - Rivets, solid, 100 o countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series.) |
| NF L21-417-2001 | 航空航天系列.耐腐蚀钢FE-PA11制钝化英制100度标称沉头的实心铆钉 | (Aerospace series - Rivets, solid, 100 o countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series.) |
| NF L21-418-2001 | 航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度标称沉头的实心铆钉 | (Aerospace series - Rivets, solid, 100 o countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series.) |
| NF L22-072-1991 | 航天建筑.螺丝.920型十字槽 | (Aerospace construction. Bolts and screws. 92 degrees cruciform recess.) |
| NF L22-718-1989 | 航天系列.带头和过盈公差的光轴 | (Aerospace series. Pins, shear, headed, close tolerance.) |
| NF L22-740-1992 | 航空航天系列.合金钢制带头的销钉,紧公差杆.技术规范 | (Aerospace series. Pins, headed, close tolerance shank, in alloy steel. Technical specification.) |
| NF L23-162-2000 | 航空和航天.镀镉平钢垫圈 | (Aerospace series - Washers, flat, in steel, cadmium plated.) |
| NF L23-166-2000 | 航空和航天.钢制镀镉的大直径平垫圈 | (Aerospace series - Washers, flat, large diameter, in steel, cadmiumplated.) |
| NF L23-320-2000 | 航空航天.锁紧丝 | (Aerospace - Lockwire.) |
| NF L23-321-2000 | 航空航天.卡簧铜丝 | (Aerospace - Snapwire, in copper.) |
| NF L23-353-1997 | 航空航天系列.钝化耐热钢销紧垫圈(欧洲标准EN 2948) | (Aerospace series. Washers, tab, in heat resisting steel, passivated.) |
| NF L23-354-1997 | 航空航天系列.钝化耐腐蚀钢线锁紧垫圈(欧洲标准EN 2949) | (Aerospace series. Washers, wire locking, in corrosion resisting steel, passivated.) |
| NF L24-008-1996 | 航空航天系列.自锁锯齿柄螺母.安装方法 | (Aerospace series. Shank nuts, self-locking, serrated. Installation procedure.) |
| NF L24-009-1996 | 航空航天系列.自锁紧锯齿柄螺母用安装孔.设计标准(欧洲标准EN 3065) | (Aerospace series. Installation holes for self-locking, serrated shank nuts. Design standard.) |
| NF L24-020-1989 | 航空和航天.1100MPa强度级和MJ螺纹合金钢螺钉.供应品的规范 | (AEROSPACE. ALLOY STEEL BOLTS WITH STRENGTH CLASSIFICATION 1100 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF L24-025-1989 | 航天.突出头合金钢螺钉.1250MPa强度的等级和MJ螺纹.供应品的规范 | (AEROSPACE. ALLOY STEEL PROTRUDING HEAD BOLTS WITH STRENGTH CLASSIFICATION 1250 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF L24-030-1997 | 航空航天系列.镍基合金NI-PH2601(铬镍铁合金718)制耐热MJ螺纹螺栓.等级:1275MPA(室温)/650℃.技术规范(欧洲 | (AEROSPACE SERIES. BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2583).) |
| NF L24-101-1994 | 航空航天系列.钝化耐热和抗腐蚀短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/425度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) /425 DEGREES C. (EUROPEAN STANDARD EN 3052).) |
| NF L24-102-1997 | 航空和航天系列.凸台,细六角头,紧配合公差柄,短螺纹,阳极化,MOS2润滑,钛合金制螺栓.等级:1100MPA(室温下)/3 | (Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.) |
| NF L24-103-1995 | 航空航天系列.阳极化、MOS2润滑的短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/315度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2549).) |
| NF L24-104-1995 | 航空航天系列.镀镉合金钢的短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2859).) |
| NF L24-105-1995 | 航空航天系列.钝化耐腐蚀钢的短螺纹紧公差标准手柄标准六角螺栓.分类:600MPA(环境温度)/425度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2887).) |
| NF L24-106-1995 | 航空航天系列.钝化耐腐蚀钢的短螺纹粗公差标准手柄标准六角螺栓.分类:600MPA(环境温度)/425度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2888).) |
| NF L24-107-1995 | 航空航天系列.镀镉合金钢的短螺纹粗公差标准手柄标准六角螺栓.分类:900MPA(环境温度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2889).) |
| NF L24-108-1995 | 航空航天系列.镀镉合金钢的带螺纹头的标准六角螺栓.分类:900MPA(环境温度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3112).) |
| NF L24-109-1997 | 航空航天系列.阳极化MOS2润滑钛合金制标准六角头、螺纹头螺丝.等级:1100MPA(室温)/315℃(欧洲标准EN 3308) | (AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).) |
| NF L24-112-1994 | 航空和航天系列.耐热钢FE-PA92HT(A286)用螺旋,六角头及螺纹头.分类.900MPa(室温)/650℃ | (AEROSPACE SERIES. SCREWS, HEXAGON HEAD, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2937).) |
| NF L24-113-1996 | 航空航天系列.镀银FE-PA92HT(A286)耐高温钢制螺纹到底部的六角螺钉.分类:900MPa(室温下)/650℃ | (AEROSPACE SERIES. SCREWS, HEXAGON HEAD, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2938).) |
| NF L24-114-1994 | 航空和航天系列.耐热钢FE-PA92HT(A286)用100°埋头螺钉,偏置式十字形凹口及螺纹头.分类.900MPa(室温)/650℃ | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 CELSIUSGRADE. (NORM EUROPEAN STANDARD EN 2939).) |
| NF L24-115-1996 | 航空航天系列.镀银耐热钢FE-PA92HT(A286)100°埋头偏置式十字形凹口螺纹到底部的螺钉.分类.900MPa(室温)/65 | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM ECESS, THREADED TO HEAD, IN HEAT RESISTING TEEL E-PA92HT(A286),SILVERPLATED.CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2940).) |
| NF L24-116-1994 | 航空和航天系列.耐热钢FE-PA92HT(A286)用螺栓,六角头,后角刀,长螺纹.分类.900MPa(室温)/650℃ | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3006).) |
| NF L24-117-1996 | 航空和航天.耐高温钢FE-PA92HT(A286)制镀银长螺纹细杆六角螺丝钉.等级900MPa(室温下)/650℃ | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3007).) |
| NF L24-118-1998 | 航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P100HT(INCONEL 718).分类:1275MPA(在环境温度下)/65 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3008).) |
| NF L24-119-1998 | 航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P100HT(INCONEL 718),镀银.分类:1275MPA(在环境温度 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED. CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3009).) |
| NF L24-120-1998 | 航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P101HT(WASPALOY).分类:1210MPA(在环境温度下)/730摄 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3010).) |
| NF L24-121-1998 | 航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P101HT(WASPALOY)镀银.分类:1210MPA(在环境温度下)/7 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3011).) |
| NF L24-130-1997 | 航空航天系列.合金钢镀镉100度埋头、槽头、螺纹头螺丝.等级:900MPA(室温)/235℃(欧洲标准EN 2652) | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2652).) |
| NF L24-131-1996 | 航空航天系列.钝化耐腐蚀钢100度标准埋头、槽头、螺纹头螺丝.分类:600MPA(环境温度)/425℃(欧洲标准EN 2653 | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2653).) |
| NF L24-132-1996 | 航空航天系列.镀锡黄铜100度标准埋头、槽头、螺纹头螺丝.分类:380MPA(环境温度)/80℃(欧洲标准EN 2654) | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED. CLASSIFICATION : 380 MPA (AT AMBIENT TMEPERATURE) / 80 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2654).) |
| NF L24-133-1997 | 航空和航天系列.100度通用沉头,偏移十字槽,紧配合普通柄,短螺纹,镀镉,合金钢制螺丝.等级:1100MPA(室温下)/2 | () |
| NF L24-134-1997 | 航空和航天系列.100度减径沉头,偏移十字槽,紧配合普通柄,短螺纹,阳极化,MOS2润滑,钛合金制螺丝.等级:1100MP | () |
| NF L24-135-1997 | 航空和航天系列.100度减径沉头,偏移十字槽,紧配合普通柄,短螺纹,镀镉,合金钢制螺丝.等级:1100MPA(室温下)/2 | () |
| NF L24-136-1997 | 航空和航天系列.阳极化MOS2润滑钛制100度标准埋头偏移十字槽、螺纹头螺丝.等级:1100MPA(室温下)/315℃(欧洲 | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3306).) |
| NF L24-137-1997 | 航空和航天系列.100度通用沉头,偏移十字槽,紧配合普通柄,短螺纹,阳极化,钛制螺丝.等级:1100MPA(室温下)/315 | () |
| NF L24-138-1997 | 航空和航天系列.钝化耐热耐腐蚀钢制100度标准埋头偏移十字槽紧公差标准柄短螺纹螺丝.等级:1100MPA(室温下)/ | () |
| NF L24-139-1997 | 航空和航天系列.100度通用沉头,偏移十字槽,螺纹到顶部,钝化,高温耐蚀钢制螺丝.等级:1100MPA(室温下)/425℃ | () |
| NF L24-161-1997 | 航空和航天系列.合金钢镀镉矩形顶盖六角形承口粗公差标准柄中等长度螺纹螺丝.等级:1100MPA(室温下)/235℃( | (AEROSPACE SERIES. SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3303).) |
| NF L24-179-1995 | 航空航天系列.镀镉合金钢的带螺纹头有槽平头螺栓.分类:900MPA(环境温度)/235度 | (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2649).) |
| NF L24-180-1996 | 航空航天系列.钝化耐腐蚀钢盘形头、槽头、螺纹头螺丝.分类:600MPA(环境温度)/425℃(欧洲标准EN 2650) | (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2650).) |
| NF L24-181-1996 | 航空航天系列.镀锡黄铜盘形头、槽头、螺纹头螺丝.分类:380MPA(环境温度)/80℃(欧洲标准EN 2651) | (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED. CLASSIFICATION : 380 MPA (AT AMBIENT TEMPERATURE) / 80 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2651).) |
| NF L24-182-1996 | 航空和航天.用MoS2润滑,阳极化,钛合金制,短螺纹,带翼型十字槽的平头螺钉.等级:1100MPa(室温下)/315℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2884).) |
| NF L24-183-1996 | 航空和航天.镀镉,合金钢制,短螺纹,带翼型十字槽的平头螺钉.等级:900MPa(室温下)/235℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2885).) |
| NF L24-184-1996 | 航空和航天系列.镀镉合金钢制短螺纹紧公差标准柄带翼型十字槽的盘形头螺丝.分类:900MPa(环境温度)/235℃(欧 | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRICUFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2886).) |
| NF L24-185-1996 | 航空和航天系列.镀镉合金钢制短螺纹紧公差标准柄带翼型十字槽的盘形头螺丝.分类:1100MPa(环境温度)/235℃( | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2897).) |
| NF L24-186-1997 | 航空和航天系列.平头,偏移十字槽,紧配合普通柄,短螺纹,阳极化,MOS2润滑,钛合金钢制螺丝.等级:1100MPA(室温 | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3037).) |
| NF L24-187-1997 | 航空和航天系列.平头,偏移十字槽,紧配合普通柄,短螺纹,钝化,高温耐蚀钢制螺丝.等级:1100MPA(室温下)/425℃ | () |
| NF L24-188-1997 | 航空和航天系列.平头,偏移十字槽,螺纹到顶部,阳极化,MOS2润滑,钛合金钢制螺丝.等级:1100MPA(室温下)/315℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3307).) |
| NF L24-189-1997 | 航空和航天系列.平头,偏移十字槽,螺纹到顶部,钝化,高温耐蚀钢制螺丝.等级:1100MPA(室温下)/425℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3759).) |
| NF L24-211-1994 | 航空和航天系列.耐热钢FE-PA92HE用螺栓,双六角头,后角刀和长螺纹.分类.900MPa(室温)/650℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-212-1996 | 航空和航天.耐高温钢FE-FA92HT(A286)制镀银长螺纹细螺杆十二角螺丝钉.等级:900 Mpa(室温外)/650℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-221-1996 | 航空和航天.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(室温外)/650℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-222-1996 | 航空和航天.耐高温镍基合金NI-P100HT(因康镍 718)制镀银长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(环境温度) | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-224-1994 | 航空和航天系列.耐热镍基合金NI-P101HT用螺栓,双六角头,紧公差柄,中长螺纹.分类.1210MPa(室温)/730℃ | (AEROSPACE SERIES. BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (NORME EUROPEENNE EN 3063).) |
| NF L24-225-1996 | 航空航天.加高螺母用耐高温镍基合金NI-P101HT(WASPALOY)中长螺纹紧公差十二角螺丝钉.分类:1210Mpa(室温)/73 | (Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), for increased height nuts. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-228-1996 | 航空和航天系列.用MoS2润滑阳极化钛合金制短螺纹紧公差标准柄标准双六角头螺栓.分类:1100MPa(环境温度)/315 | (AEROSPACE SERIES. BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2870).) |
| NF L24-229-1996 | 航空和航天系列.钝化耐热镍基合金制制中长螺纹紧公差标准柄大六角头螺栓.分类:1550MPa(环境温度)/315℃(欧 | (AEROSPACE SERIES. BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED. CLASSIFICATION : 1550 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2874).) |
| NF L24-231-1996 | 航空和航天.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1210 Mpa(室温外)/730℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-232-1996 | 航空和航天.耐高温镍基合金NI-P101HT(Waspaloy 一种耐高温热镍基合金)制镀银长螺纹细螺杆十二角螺丝钉.等级 | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-381-1994 | 航空和航天系列.耐热钢FE-PA92HE(A286)用螺栓,双六角头,后角刀和长螺纹.分类.900MPa(室温)/650℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-382-1996 | 航空和航天.耐高温钢FE-PA92HT(A286)制镀银长螺纹细螺杆T字头螺丝钉.等级:900 Mpa(室温外)/650℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-383-1996 | 航空和航天.耐高温镍基合金NI-P100HT(INCONE/718)长螺纹细螺杆T字头螺丝钉.分类:1275 Mpa(室温下)/650℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-384-1996 | 航空和航天.耐高温镍基合金NI-P100HT(INCONE/718)镀银长螺纹细螺杆T字头螺丝钉.分类:1275 Mpa(室温下)/650 | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-385-1996 | 航空和航天.耐高温镍基合金NI-P101HT(WASPALOY)长螺纹细螺杆T字头螺丝钉.分类:1210 Mpa(室温下)/730℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-386-1996 | 航空和航天.耐高温镍基合金NI-P101HT(WASPALOY)镀银长螺纹细螺杆T字头螺丝钉.分类:1210 Mpa(室温下)/730℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-410-1997 | 航空和航天系列.耐热钢FE PA2601(A286)制自锁定MJ螺纹螺母.技术规范.等级:1100MPa(室温)/650℃(欧洲标准EN | (AEROSPACE SERIES. NUTS, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286). CLASSIFICATION : 1100 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 3004).) |
| NF L24-421-1994 | 航空和航天系列.镀银耐热钢FE PA92HT(A286)用六角,自锁定螺母.分类.1100MPa(室温)/425℃ | (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 1100 MPA (at AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3196).) |
| NF L24-469-1997 | 航空和航天系列.合金钢镀镉MOS2润滑深锪孔双耳锁紧浮动地脚螺母.等级:900MPa/235℃(欧洲标准EN 2264) | (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2264).) |
| NF L24-471-1989 | 航空和航天系列.内固定内深锪孔双耳锁紧螺母.分类.1100MPa/235℃ | (AEROSPACE SERIES. NUTS,ANCHOR,SELF LOCKING,FIXED,TWO LUG,REDUCED SERIES,WITH COUNTERBORE. CLASSIFICATION : 1100 MPA/235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2752).) |
| NF L24-472-1996 | 航空和航天系列.带埋头孔的固定锚式单耳自锁镀镉合金钢MOS2润滑螺母.分类.1100MPa(环境温度)/235℃ | (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICAITON : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2753).) |
| NF L24-507-1995 | 航空和航天.自锁镀隔合金钢MOS*2制坡面垫平用润滑六角螺母.等级900MPa/235℃ | (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2647).) |
| NF L24-508-1996 | 航空和航天.钝化耐高温钢制小板手开口度平面六角螺母.等级:600MPa(室温下)/650℃ | (AEROSPACE SERIES. NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 4069).) |
| NF L24-509-1996 | 航空和航天.耐高温钢制FE-PA92HT(A286)自锁定六角螺母.分类:1100Mpa(室温下)/425℃ | (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION: 1100 MPA (at AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3377).) |
| NF L24-510-1996 | 航空和航天.MOS2涂覆的耐高温钢制FE-PA92HT(A286)自锁定六角螺母.分类:1100Mpa(室温下)/425℃ | (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), MOS2 COATED. CLASSIFICATION : 1100 MPA (at AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3723).) |
| NF L24-511-2001 | 航空航天系列.镀银、耐热钢制、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃ | (Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification : 900 MPa (at ambient temperature) / 650 o C.) |
| NF L24-512-2001 | 航空航天系列.钝化、耐热钢制、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃ | (Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification : 900 MPa (at ambient temperature) / 650 o C.) |
| NF L24-513-2001 | 航空航天系列.钢制、镀镉、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/235℃ | (Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in steel, cadmium plated - Classification : 900 MPa (at ambient temperature) / 235 o C.) |
| NF L24-600-1988 | 航空和航天.最高温度超过425℃时使用的螺母.检测和试验方法 | (AEROSPACE. SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C. TEST METHODS.) |
| NF L24-601-1990 | 航空和航天.有覆层或无覆层自锁式六角形MJ螺纹螺母.类别为1100MPa/235℃,1100MPa/315℃或者1100MPa/425℃. | (AEROSPACE. NUTS,HEXAGONAL,SELF-LOCKING,WITH MJ THREADS,COATED OR UNCOATED,CLASSIFICATION 1100 MPA/235 DEGREES C,1100 MPA/315 DEGREES C OR 1100 MPA/425 DEGREES C. DIMENSIONS.) |
| NF L24-664-1996 | 航空和航天.HI-P101HT耐高热镍基合金自锁十二角螺母.等级:1210Mpa(室温下)/730℃ | (AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION: 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3012).) |
| NF L24-665-1996 | 航空航天系列.镀银HI-P101HT耐高热镍基合金自锁十二角螺母.分类:1210MPA(室温下)/730℃ | (AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3013).) |
| NF L24-666-1996 | 航空航天系列.镀银螺纹NI-P101HT耐高热镍基合金制自锁十二角螺母.分类:1210MPA(室温下)/730℃ | (AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED THREAD. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3239).) |
| NF L24-669-1994 | 航空和航天系列.耐热钢FE-PA92HT(A286)用双六角,自锁定,具有深锁口的螺母.分类.1100MPa(室温)/650℃ | (Aerospace series. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-672-1994 | 航空和航天系列.耐热钢FE-PA92HT(A286)用双六角,自锁定螺母.分类.1100MPa(室温)/650℃ | (Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-673-1996 | 航空航天系列.镀银FE-PA92HT(A286)耐热钢自锁十二角螺母.分类:1100MPa(室温下)/650℃ | (Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-675-1994 | 航空和航天系列.耐热钢FE-PA92HT用自锁定螺钉体螺母.分类.1100MPa(室温)/650℃ | (Aerospace series. Shank nuts, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-684-2001 | 航空航天系列.耐热钢FE-PA2601(A286)制锯齿形自锁紧带柄螺母.等级:1100MPa(室温)/650℃ | (Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa (at ambient temperature) / 650 o C.) |
| NF L24-685-2001 | 航空航天系列.耐热钢FE-PA2601(A286)制锯齿形镀银自锁紧带柄螺母.等级:1100MPa(室温)/650℃ | (Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) silver plated - Classification : 1 100 MPa (at ambient temperature) / 650 o C.) |
| NF L24-701-1990 | 航空和航天.螺帽、花键传动、自锁、MJ螺纹、镀或未镀,1100MPa/650℃、1250MPa/770℃、1550MPa/235℃或1550 | (AEROSPACE. NUTS,SPLINE-DRIVE,SELF-LOCKING,WITH MJ THREADS,COATED OR UNCOATED,CLASSIFICATION 1100 MPA/650 DEGREES C,1250 MPA/760 DEGREES C,1550 MPA/235 DEGREES C OR 1550 MPA/650 DEGREES C. DIMENSIONS.) |
| NF L24-971-1995 | 航空和航天系列.镀镉合金钢用短螺纹紧公差薄六角头削角边螺栓.分类.1100MPa(室温)/235℃ | (Aerospace series. Bolts, shoudered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 degrees celsius.) |
| NF L24-980-1998 | 航空航天系列.自锁,螺旋线圈,螺纹,插入件.技术规范 | (Aerospace series. Inserts, screw thread, helical coil, self-locking. Technical specification.) |
| NF L26-301-1995 | 航空航天系列.耐热镍基合金NI-P100HT(INCONEL718)用无头削角边联轴节 | (Aerospace series. Pins, shoulder, headless, in heat resisting nickel base alloy ni-P100HT (inconel 718).) |
| NF L26-302-1995 | 航空航天系列.耐热镍基合金NI-P100HT(INCONEL718)用平纹定位销 | (Aerospace series. Dowels, plain, in heat resisting nickel base alloy ni-P100HT (inconel 718).) |
| NF L31-201-1992 | 航空航天系列.机身用滚动轴承.技术规范 | (Aerospace series. Airframe rolling bearings. Technical specification.) |
| NF L31-202-1994 | 航空航天系列.刚性或自校直飞机骨架滚动轴承.技术规范 | (Aerospace series. Bearings, airframe rolling, rigid or self-aligning. Technical specification.) |
| NF L31-205-1985 | 航天系列.机身用轴承.单排滚珠钢制钢性轴承尺寸系列8和9.尺寸与负载 | (Aerospace series. Bearings, airframe rolling, rigid single row ball bearings, in steel, diameter series 8 and 9, dimensions and loads.) |
| NF L31-206-1985 | 航天系列.轴承.系列8和系列9、单排耐腐蚀钢制、飞机机架用滚珠轴承.(EN2011)的尺寸与载荷 | (Aerospace series. Bearings, airframe rolling, rigid single row ball bearings, in corrosion resisting steel, diameter series 8 and 9, dimensions and loads.) |
| NF L31-216-1985 | 航空和航天系列.单排滚珠钢制钢性轴承.尺寸系列0和2.尺寸与负载 | (Aerospace series. Bearings, airframe rolling, rigid single row ball bearings, in steel, diameter series 0 and 2, dimensions and loads.) |
| NF L31-217-1985 | 航空和航天系列.单排滚珠钢制耐腐蚀轴承尺寸系列0和2.尺寸与负载 | (Aerospace series. Bearings, airframe rolling, rigid single row ball bearings, in corrosion resisting steel, diameter series 0 and 2, dimensions and loads.) |
| NF L31-219-1985 | 航空和航天系列.双排滚珠钢制耐腐蚀轴承尺寸系列:2 | (Aerospace series. Bearings, airframe rolling, double row self-aligning ball bearings, in corrosion resisting steel, diameter serie 2, dimensions and loads.) |
| NF L31-221-1985 | 航空和航天系列.机身用轴承、双排滚珠钢制耐腐蚀轴承.尺寸系列:2.尺寸和负荷 | (Aerospace series. Bearing, airframe rolling, double row self-aligning ball bearings, in steel, diameter series 2, dimensions and loads.) |
| NF L31-228-1985 | 航空和航天系列.机身用轴承.单排滚珠钢制耐腐蚀轴承.尺寸系列3和4.尺寸和负载.(EN 2020) | (Aerospace series. Bearings, airframe rolling, single row self-aligning roller bearings, in steel, diameter series 3 and 4, dimensions and loads.) |
| NF L31-229-1985 | 航空和航天系列.机身用轴承.单排滚珠钢制耐腐蚀轴承.尺寸系列3和4.尺寸和负载(EN 2020) | (Aerospace series-. Bearings, airframe rolling, single row self-aligning roller bearings, in corrosion resisting steel, diameter series 3 and 4, dimensions and loads.) |
| NF L31-251-1994 | 航空航天系列.飞机骨架滚动轴承.刚性单排钢质滚珠轴承.直径系列为0和2.对比间隙等级.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL. DIAMETER SERIES 0 AND 2. REDUCED CLEARANCE CATEGORY. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3045).) |
| NF L31-252-1994 | 航空航天系列.飞机骨架滚动轴承.刚性单排镀镉钢滚珠轴承.直径系列为0和2.对比间隙等级.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL CADMINIUM PLATED. DIAMETER SERIES 0 AND 2. REDUCED CLEARANCE CATEGORY. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3046).) |
| NF L31-253-1994 | 航空航天系列.飞机骨架滚动轴承.刚性单排耐腐蚀钢滚珠轴承.直径系列为0和2.对比间隙等级.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL. DIMATER SERIES 0 AND 2. REDUCED CLEARANCE CATEGORY. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3047).) |
| NF L31-254-1994 | 航空航天系列.飞机骨架滚动轴承.单排自校直钢质轴承.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN STEEL. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3053).) |
| NF L31-255-1994 | 航空航天系列.飞机骨架滚动轴承.单排自校直钢质,镉板轴承.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALGNING ROLLER BEARINGS IN STEEL, CADMIUM PLATED. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3054).) |
| NF L31-256-1994 | 航空航天系列.飞机骨架滚动轴承.单排自校直耐腐蚀钢轴承.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN CORROSION RESISTING STEEL. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3055).) |
| NF L31-257-1994 | 航空航天系列.飞机骨架滚动轴承.刚性双排钢质球轴承.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID DOUBLE ROW BALL BEARINGS IN STEEL. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3056).) |
| NF L31-258-1994 | 航空航天系列.飞机骨架滚动轴承.刚性双排钢质,镉板球轴承.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID DOUBLE ROW BALL BEARINGS IN STEEL, CADMIUM PLATED. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3057).) |
| NF L31-259-1994 | 航空航天系列.飞机骨架滚动轴承.刚性双排耐腐蚀钢球轴承.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID DOUBLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3058).) |
| NF L31-260-1994 | 航空和航天系列.机身用轴承.单排滚珠钢制钢性轴承.尺寸系列8和9.尺寸与负载(EN 3281) | (Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 8 and 9. Dimensions and loads.) |
| NF L31-261-1994 | 航空航天系列.飞机骨架滚动轴承.刚性单排钢质,镉板球轴承.直径系列8和9.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL, CADMIUM PLATED. DIAMETER SERIES 8 AND 9. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3282).) |
| NF L31-262-1994 | 航空和航天系列.单排滚珠耐腐蚀钢制钢性轴承.尺寸系列8和9.尺寸与负载(EN 3283) | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL. DIAMETER SERIES 8 AND 9. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3283).) |
| NF L31-263-1994 | 航空和航天系列.单排滚珠钢制钢性轴承.尺寸系列0和2.标准间隙目录.尺寸与负载(EN 3284) | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL. DIAMETER SERIES 0 AND 2. NORMAL CLEARANCE CATEGORY. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3284).) |
| NF L31-264-1994 | 航空航天系列.飞机骨架滚动轴承.刚性单排钢质,镉板球轴承.直径系列0和2.标准公隙.尺寸和负荷 | (AEROSPACES SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL, CADMIUM PLATED. DIAMETER SERIES 0 AND 2. NORMAL CLEARANCE CATEGORY. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3285).) |
| NF L31-266-1994 | 航空和航天系列.单排滚珠耐腐蚀钢制钢性轴承.尺寸系列0和2.标准间隙目录.尺寸与负载(EN 3286) | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN CORROSIONS RESISTING STEEL. DIAMETER SERIES 0 AND 2. NORMAL CLEARANCE CATEGORY. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3286).) |
| NF L31-267-1994 | 航空和航天系列.机身用轴承.双排滚珠钢制自校轴承.尺寸系列2.尺寸和负载(EN 3287) | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. DOUBLE ROW SELF-ALIGNING BALL BEARINGS IN STEEL. DIAMETER SERIES 2. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3287).) |
| NF L31-268-1994 | 航空航天系列.飞机骨架滚动轴承.刚性双排钢质,镉板球轴承.直径系列2.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. BOUBLE ROW SELF-ALIGNING BALL BEARINGS IND STEEL, CADMIUM PLATED. DIAMETER SERIES 2. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3288).) |
| NF L31-269-1994 | 航空和航天系列.机身用轴承.双排滚珠自动调位耐腐蚀轴承.直径系列2.尺寸和负载(EN 3289) | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. DOUBLE ROW SELF-ALIGNING BALL BEARINGS IN CDORROSION RESISTING STEEL. DIAMETER SERIES 2. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3289).) |
| NF L31-270-1994 | 航空和航天系列.机身用轴承.单排滚珠自动调位钢制轴承.直径系列3和4.尺寸和负载(EN 3290) | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN STEEL. DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3290).) |
| NF L31-271-1994 | 航空航天系列.飞机骨架滚动轴承.刚性双排钢质,镉板球轴承.直径系列3和4.尺寸和负荷 | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN STEEL, CADMIUM PLATED. DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3291).) |
| NF L31-272-1994 | 航空和航天系列.机身用轴承.单排滚珠自动调位钢制轴承.直径系列3和4.尺寸和负载(EN 3292) | (AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN CORROSION RESISTING STEEL. DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 3292).) |
| NF L31-340-2002 | 航空航天系列.仪器和设备用耐腐蚀钢制精密球轴承.技术规范 | (Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification.) |
| NF L31-341-1995 | 航空和航天系列.仪器和设备用耐腐蚀钢制不带法兰的精密球轴承.尺寸和负荷 | (Aerospace series. Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads.) |
| NF L31-343-1995 | 航空和航天系列.仪器和设备用耐腐蚀钢制带法兰的精密球轴承.尺寸和负荷 | (Aerospace series. Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads.) |
| NF L31-520-1996 | 航空和航天.关节轴承.交货技术条件 | (AEROSPACE SERIES. SPHERICAL PLAIN BEARINGS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2337).) |
| NF L31-521-1988 | 航空和航天系列.钢制光面耐腐蚀球头螺栓.无槽沟的连接.尺寸和负载 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads.) |
| NF L31-522-1988 | 航空和航天系列.钢制光面球头螺栓.有槽沟的连接.尺寸和负载 | (Aerospace series. Bearings-spherical plain in steel with assembly slots. Dimensions and loads.) |
| NF L31-523-1988 | 航空和航天系列.钢制光面耐腐蚀球头.有槽沟的连接.尺寸和负载 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads.) |
| NF L31-550-1992 | 航空航天系列.带自调润滑衬套的耐蚀钢关节轴承.技术规范 | (Aerospace series. Bearings spherical plain in corrosion resisting steel with self lubricating liners. Technical specification.) |
| NF L31-553-1988 | 航空和航天系列.自润滑油封防腐球头螺栓和宽内垫圈.尺寸和负载 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads.) |
| NF L31-554-1988 | 航空和航天系列.轻系列自润滑油封钢制耐腐蚀球头螺栓的钢球头螺栓 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, light series. Dimensions and loads.) |
| NF L31-555-1988 | 航空和航天系列.标准系列自润滑油封钢制耐腐蚀球头螺栓.尺寸和负载 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, normal series. Dimensions and loads.) |
| NF L31-556-2002 | 航空和航天系列.室温条件下高负荷、窄系列、带自动润滑层的耐蚀钢球面轴承.尺寸和负载 | (Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads.) |
| NF L31-557-2002 | 航空和航天系列.室温条件下高负荷、宽系列、带自动润滑层的耐蚀钢球面轴承.尺寸和负载 | (Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads.) |
| NF L31-558-2002 | 航空和航天系列.室温条件下高负荷、轻系列、带自动润滑层的耐蚀钢球面轴承.尺寸和负载 | (Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions andd loads.) |
| NF L31-601-1987 | 航空和航天系列.自动润滑垫圈.技术规范 | (Aerospace series. Bushes with self-lubricating liner. Technical specification.) |
| NF L31-602-1990 | 航空和航天系列.铝合金圆环.自润滑油封.尺寸和负载 | (AEROSPACE SERIES. BUSHES,PLAIN ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2285).) |
| NF L31-603-1990 | 航空和航天系列.铝合金凸环.自润滑油封.尺寸和负载 | (AEROSPACE SERIES. BUSHES,FLANGED ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2286).) |
| NF L31-604-1990 | 航空和航天系列.钢质防腐圆环.自润滑油封.尺寸和负载 | (AEROSPACE SERIES. BUSHES,PLAIN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2287).) |
| NF L31-605-1990 | 航空和航天系列.钢制防腐凸环.自润滑油封.尺寸和负载 | (Aerospace series. Bushes, flanged corrosion resisting steel with self-lubricating liner. Dimensions and loads.) |
| NF L31-613-1989 | 航空和航天系列.铝合金制套管 | (AEROSPACE SERIES. COLLARS,ALUMINIUM ALLOY. (EUROPEAN STANDARD EN 2365).) |
| NF L32-612-1996 | 航空航天系列.键槽的下部切割.设计标准(欧洲标准EN 3612) | (Aerospace series. Undercuts for splines. Design standard.) |
| NF L35-110-1998 | 航空航天系列.飞行控制棒组件.技术规范 | (AEROSPACE SERIES. ROD ASSEMBLIES FOR FLIGHT CONTROLS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2644).) |
| NF L35-120-1996 | 航空航天系列.飞行操纵系统用铝合金制杆体.技术规范(欧洲标准EN 2289) | (AEROSPACE SERIES. ROD BODIES IN ALUMINIUM ALLOY FOR FLIGHT CONTROLS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2289).) |
| NF L35-121-1998 | 航空航天系列.棒材,可调节末端配件用铝合金飞行控制.第1部分:尺寸和负载 | (AEROSPACE SERIES. ROD BODIES, FLIGHT CONTROL IN ALUMINIUM ALLOY FOR ADJUSTABLE END FITTINGS. PART 1 : DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2290-1).) |
| NF L35-142-1990 | 航空和航天系列.带螺纹杆和单支架的可调底座.尺寸和负载.(欧洲标准 EN 2515) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE SIMPLE FORK AND THREADED SHANK. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2515).) |
| NF L35-143-1990 | 航空和航天系列.带螺纹杆和双支架的可调底座.尺寸和负载.(欧洲标准 EN 2587) | (AEROSPACE SERIES. ROD ENS,ADJUSTABLE FORK AND THREADED SHANK. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2587).) |
| NF L35-145-1996 | 航空航天系列.可调节叉端.技术规范(欧洲标准EN 2601) | (Aerospace series. Fork ends, adjustable. Technical specification.) |
| NF L35-172-1990 | 航空和航天系列.带螺纹杆和自润滑油封球头螺栓的可调底座.尺寸和负载.(欧洲标准 EN 2498) | (AEROSPACE SERIES. ROD ENDS,AJUSTABLE SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AN THREADED SHANK. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2498).) |
| NF L35-181-1988 | 航空和航天系列.飞行操纵拉杆用的止动垫圈.尺寸 | (Aerospace series. Washers, tab for flight control rods. Dimensions.) |
| NF L36-200-1989 | 航空和航天系列.操纵设备用缆索设备.技术规范 | (AEROSPACE SERIES. CONTROL CABLE ASSEMBLIES. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2348).) |
| NF L36-202-1989 | 航空和航天系列.钢制抗腐蚀拉紧螺杆用带眼接头.尺寸和负载 | (Aerospace series. Eye-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads.) |
| NF L36-203-1989 | 航空和航天系列.钢制抗腐蚀拉紧螺杆用带眼接头.尺寸和负载 | (Aerospace series. Fork-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads.) |
| NF L36-204-1989 | 航空和航天系列.钢制抗腐蚀轴承用拉紧螺杆叉形接头.尺寸和负载 | (Aerospace series. Fork-ends, threaded, control cable for rolling bearings in corrosion resisting steel. Dimensions and loads.) |
| NF L36-205-1989 | 航空和航天系列.嵌入操纵缆索的钢制抗腐蚀拉紧螺杆接头.尺寸和负载 | (AEROSPACE SERIES. STUD-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CALBLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2357).) |
| NF L36-206-1989 | 航空和航天系列.嵌入操纵缆索的钢制抗腐蚀带眼接头.尺寸和负载 | (AEROSPACE SERIES. EYE-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2358).) |
| NF L36-207-1989 | 航空和航天系列.嵌入操纵缆索的钢制抗腐蚀叉形接头.尺寸和负载 | (AEROSPACE SERIES. FORK-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2359).) |
| NF L36-208-1989 | 航空和航天系列.抗嵌入操纵缆索的钢制抗腐蚀球体端面接头.尺寸和负载 | (AEROSPACE SERIES. FORK-ENDS,FOR ROLLING BEARINGS IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2360).) |
| NF L36-209-1989 | 航空和航天系列.嵌入操纵缆索的钢制抗腐蚀球端面接头.尺寸和负载 | (AEROSPACE SERIES. BALL-ENDS,DOUBLE SHANK IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2361).) |
| NF L36-210-1989 | 航空和航天系列.嵌入操纵缆索的钢制抗腐蚀球面接头.尺寸和负载 | (AEROSPACE SERIES. BALL-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2362).) |
| NF L36-212-1989 | 航空和航天系列.铜锌合金制拉紧螺杆套筒.尺寸和负载 | (Aerospace series. Turnbarrels, control cable in copper-zinc alloys. Dimensions and loads.) |
| NF L36-213-1992 | 航空航天系列.带螺纹杆的、可调、自动对心球轴承的杆端尺寸、扭矩、间隙和载荷 | (AEROSPACE SERIES. ROD ENDS, ADJUSTABLE, SELF-ALIGNING BALL BEARING WITH THREADED SHANK. DIMENSIONS, TORQUES, CLEARANCES AND LOADS. (EUROPEAN STANDARD EN 3541).) |
| NF L36-215-1996 | 航空和航天.带自动调心球轴承的吊环端头.交货技术条件 | (AEROSPACE SERIES. ROD ENDS WITH SELF-ALIGNING BALL BEARINGS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2067).) |
| NF L36-220-1989 | 航空和航天系列.传动设备用缆绳.组装件和尺寸 | (AEROSPACE SERIES. CONTROLE CABLE ASSEMBLIES. COMBINATIONS AND DIMENSIONS. (EUROPEAN STANDARD EN 2641).) |
| NF L36-221-1991 | 航空和航天系列.底座和软轴的拉紧螺杆.技术规范(欧洲标准 EN 2569) | (Aerospace series. Control cable fittings and turnbarrels. Technical specification.) |
| NF L36-222-1991 | 航空和航天系列.带自润滑油封和螺纹安装杆的球形可调接头:螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2790) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AND THREADED SHANK WITH ENGAGEMENT : 1,5 THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2790).) |
| NF L36-223-1991 | 航空和航天系列.带自润滑油封和螺纹安装杆的单包边可调接头:螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2791) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SINGLE FORK AND THREADED SHANK WITH ENGAGEMENT : 1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2791).) |
| NF L36-224-1991 | 航空和航天系列.带自润滑油封和螺纹安装杆的双包边可调接头.螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2792) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,DOUBLE FORK AND THREADED SHANK WITH ENGAGEMENT :1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2792).) |
| NF L36-225-1996 | 航空和航天.带关节轴承和自润滑涂层的吊环端头.交货技术条件 | (AEROSPACE SERIES. ROD ENDS WITH SELF-LUBRICATING SELF-ALIGNING BEARINGS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2068).) |
| NF L36-711-1974 | 航天用滚子传动链和相应轮的啮合 | (ROLLER CHAINS AND FITTED COG WHEELS GEARING - SELECTION FOR AEROSPACE USE.) |
| NF L40-112-1987 | 航空和航天.经向密封接头.阳螺纹剖面和ISO 米制螺纹公差.尺寸 | (Aerospace fitting joint assembly, radial sealing. Male thread fittings. ISO metric thread profile and tolerances. Dimensions.) |
| NF L40-113-1987 | 航空和航天.经向密封接头.阴螺纹剖面和ISO 米制螺纹公差.尺寸 | (Aerospace fitting joint assembly, radial sealing. Internal thread bosses. ISO metric thread profile and tolerances. Dimensions.) |
| NF L40-114-1987 | 航空和航天.径向密封接头.环形接头.尺寸 | (Aerospace fitting joint assembly, radial sealing. O-rings. Dimensions.) |
| NF L41-250-1987 | 航空航天设备用聚四氯乙烯管.密度和相对密度的测定方法 | (Polytetrafluoroethylene (ptfe) tubing for aerospace applications. Methods for the determination of the density and relative density.) |
| NF L43-350-2002 | 航空航天系列.8°30'～ 28 000 kPa管联接件.动态梁密封端.米制系列.技术规范 | (Aerospace series - Pipe coupling 8 o30' up to 28 000 kPa - Dynamic beam seal - Metric series - Technical specification.) |
| NF L43-351-2002 | 航空航天系列.管联接器8°30'.螺纹端部.几何构型 | (Aerospace series - Pipe coupling 8 o30' - Thread end - Geometric configuration.) |
| NF L43-352-2002 | 航空航天系列.管联接器8°30'.弯管、T形管和十字管用动态梁密封端.几何构型 | (Aerospace series - Pipe couplings 8 o30' - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration.) |
| NF L43-353-2002 | 航空航天系列.管联接器8°30'.金属包头焊接用动态梁密封端.几何构型 | (Aerospace series - Pipe coupling 8 o30' - Dynamic beam seal end for ferrule, welded - Geometric configuration.) |
| NF L43-354-2002 | 航空航天系列.管联接器8°30'.焊接的联接器端部.几何构型 | (Aerospace series - Pipe coupling - Coupling ends, welded - Geometric configuration.) |
| NF L43-360-2002 | 航空航天系列.钛合金管联接器8°30'.带螺纹的管端弯接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded, end, threaded.) |
| NF L43-361-2002 | 航空航天系列. 8°30'钛合金管连接件.带动态梁密封端的焊接卡套 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Ferrules, welded, with dynamic beam seal end.) |
| NF L43-362-2002 | 航空航天系列. 8°30'钛合金管连接件.直接头 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Unions, straight.) |
| NF L43-363-2002 | 航空航天系列. 8°30'钛合金管连接件.直减径接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, straight, reducer.) |
| NF L43-364-2002 | 航空航天系列.8°30'钛合金管联接件.隔壁直角管接头 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Unions, straight bulkhead.) |
| NF L43-365-2002 | 航空航天系列.8°30'钛合金管联接件.隔壁直角弯接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, welded end.) |
| NF L43-366-2002 | 航空航天系列.钛合金管联接器8°30'.带密封环的异径管端接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Adaptors, reduced pipe end, with lockring.) |
| NF L43-370-2002 | 航空航天系列.8°30'钛合金管联接件.90°弯头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o.) |
| NF L43-371-2002 | 航空航天系列.8°30'钛合金管联接件.带推进线螺母的90°弯头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o with thrust wire nut.) |
| NF L43-372-2002 | 航空航天系列.8°30'钛合金管联接件.90°弯头焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o welded end.) |
| NF L43-373-2002 | 航空航天系列.8°30'钛合金管联接件.带推进线螺母的90°弯头焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, welded end with thrust wire nut.) |
| NF L43-374-2002 | 航空航天系列.8°30'钛合金管联接件.隔离直通90°弯头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, bulkhead.) |
| NF L43-375-2002 | 航空航天系列.8°30'钛合金管联接件.隔离直通90°弯头焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, bulkhead, welded end.) |
| NF L43-376-2002 | 航空航天系列. 8°30'钛合金管联接件.45°弯头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o.) |
| NF L43-377-2002 | 航空航天系列. 8°30'钛合金管联接件.带推进线螺母的45°焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded end with thrust wire nut.) |
| NF L43-378-2002 | 航空航天系列. 8°30'钛合金管联接件.隔离直通45°弯头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o, bulkhead.) |
| NF L43-379-2002 | 航空航天系列.8°30'钛合金管联接件.三通管 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees.) |
| NF L43-380-2002 | 航空航天系列. 8°30'钛合金管联接件.带推进线螺母的三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees branch with thrust wire nut.) |
| NF L43-381-2002 | 航空航天系列.8°30'钛合金管联接件.端部带推进线螺母的三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees with thrust wire nut on run.) |
| NF L43-382-2002 | 航空航天系列.8°30'钛合金管联接件.隔直三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees bulkhead branch.) |
| NF L43-383-2002 | 航空航天系列.8°30'钛合金管联接件.端部隔直三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees bulkhead on run.) |
| NF L43-384-2002 | 航空航天系列.8°30'钛合金管联接件.推进线螺母 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Thrust wire nut.) |
| NF L43-385-2002 | 航空航天系列.8°30'钛合金管联接件.焊接卡套用螺母 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Nut for welded ferrule.) |
| NF L43-386-2002 | 航空航天系列.8°30'钛合金管联接件.隔壁直通螺母 | (Aerospace series - Pipe coupling in titanium alloy - Bulkhead nuts.) |
| NF L43-387-2002 | 航空航天系列.8°30'钛合金管联接件.推进线 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Thrust wire.) |
| NF L43-388-2002 | 航空航天系列.8°30'钛合金管联接件.带动态粱密封端的端部焊接减径的卡套 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end.) |
| NF L43-389-2002 | 航空航天系列.8°30'钛合金管联接件.锁环配件 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Adaptors with lockring.) |
| NF L43-390-2002 | 航空航天系列.8°30'钛合金管联接件. 长型隔壁直通接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long.) |
| NF L43-391-2002 | 航空航天系列.8°30'钛合金管联接件. 长型隔壁直通接头焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long, welded end.) |
| NF L43-392-2002 | 航空航天系列.8°30'钛合金管联接件.减径三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced.) |
| NF L43-393-2002 | 航空航天系列.钛合金管联接器8°30'.弯管90度焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o welded ends.) |
| NF L43-394-2002 | 航空航天系列.钛合金管联接器8°30'.弯管45度焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded ends.) |
| NF L43-395-2002 | 航空航天系列.钛合金管联接器8°30'.长期使用的闷头T形管 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees bulkhead on run long.) |
| NF L43-396-2002 | 航空航天系列.钛合金管联接器8°30'.十字T形管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, cross.) |
| NF L43-397-2002 | 航空航天系列.钛合金管联接器8°30'.90度闷头长弯管 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o bulkhead, long.) |
| NF L43-398-2002 | 航空航天系列.8°30'钛合金管联接件.长焊接端的90°弯头隔壁直通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o bulkhead, welded end long.) |
| NF L43-399-2002 | 航空航天系列.8°30'钛合金管联接件.长分支隔壁直通三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, bulkhead branch long.) |
| NF L43-400-2002 | 航空航天系列.8°30'钛合金管联接件.端部带推进线螺母的减径三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced with thrust wire nut on run.) |
| NF L43-401-2002 | 航空航天系列.8°30'钛合金管联接件.Tees, reduced, bulkhead branch, long | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead branch, long.) |
| NF L43-402-2002 | 航空航天系列.8°30'钛合金管联接件.隔壁直通分支减径三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead branch.) |
| NF L43-403-2002 | 航空航天系列.8°30'钛合金管联接件.长端头部隔壁直通分支减径三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead on run, long.) |
| NF L43-404-2002 | 航空航天系列.8°30'钛合金管联接件.隔壁直通减径三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead.) |
| NF L43-406-2002 | 航空航天系列.钛合金管联接器8°30'.检修用带动态梁密封端的焊接金属包头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair.) |
| NF L43-407-2002 | 航空航天系列.钛合金管联接器8°30'.检修用焊接端部的闷头管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead welded end, for repair.) |
| NF L43-408-2002 | 航空航天系列.钛合金管联接器8°30'.检修用长的焊接端部的闷头管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead long welded end, for repair.) |
| NF L43-409-2002 | 航空航天系列.钛合金管联接器8°30'.检修用焊接端加螺纹的管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded end threaded for repair.) |
| NF L43-550-1988 | 航空航天轮机设备.快卸低压接头.一般互换条件 | (AEROSPACE. CABIN EQUIPMENTS. LOW PRESSURE QUICK DISCONNECT COUPLING. GENERAL CHARACTERISTICS.) |
| NF L43-613-2003 | 航空航天系列.耐热钢或耐热镍合金管连接件.焊接连接端.设计构型.英制 | (Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series.) |
| NF L43-614-2003 | 航空航天系列.管连接件37度.设计构型.英制.第1部分:凸形密封球端 | (Aerospace series - Pipe coupling, 37 o - Design configuration - Inch series - Part 1 : male sealing ends, spherical.) |
| NF L43-615-2003 | 航空航天系列.管连接件37度.设计构型.英制.第2部分:管端 | (Aerospace series - Pipe coupling, 37 o - Design configuration - Inch series - Part 2 : port ends.) |
| NF L43-616-2003 | 航空航天系列.管连接件37度.设计构型.英制.第3部分:管口连接件 | (Aerospace series - Pipe coupling, 37 o - Design configuration - Inch series - Part 3 : port connections.) |
| NF L43-617-2003 | 航空航天系列.管连接件37度.设计构型.英制.第4部分:凹口密封端 | (Aerospace series - Pipe coupling, 37 o - Design configuration - Inch series - Part 4 : female sealing ends.) |
| NF L43-618-2003 | 航空航天系列.耐热钢制37度管接头.转动螺套.英制 | (Aerospace series - Pipe coupling 37 o, in heat resisting steel - Swivel nuts - Inch series.) |
| NF L43-619-2003 | 航空航天系列.耐热钢制37度管接头.焊接端直通接管头.英制 | (Aerospace series - Pipe couplings, 37 o, spherical, in heat resisting steel - Straight nipples, welded end - Inch series.) |
| NF L43-620-2003 | 航空航天系列.60度钛合金管接头.油口接头 | (Aerospace series - Pipe couplings, 60 o, in titanium alloy - Port connection.) |
| NF L43-621-2003 | 航空航天系列.60度钛合金TI-P64001球形管接头.直通转动螺套 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts, straight.) |
| NF L43-622-2003 | 航空航天系列.钛合金TI-P64001制球形、60度管联接器.焊接的螺纹直活管节 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded.) |
| NF L43-623-2003 | 航空航天系列.钛合金TI-P64001制球形、60度管联接器.螺纹直活管节 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Straight unions, threaded.) |
| NF L43-624-2003 | 航空航天系列.钛合金TI-P64001制球形、60度管联接器.焊接箍 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Ferrules, welded.) |
| NF L43-625-2003 | 航空航天系列.钛合金TI-P64001制球形、60度管联接器.管底座 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Caps.) |
| NF L43-626-2003 | 航空航天系列.60度钛合金TI-P64001球形管接头.拉力张线用转动螺套 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire.) |
| NF L43-627-2003 | 航空航天系列.60度钛合金TI-P64001球形管接头.焊接的90度弯头 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Elbows 90 o, welded.) |
| NF L43-628-2003 | 航空航天系列.60度钛合金TI-P64001球形管接头.钢FE-PA13制拉力张线 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA13.) |
| NF L43-629-2003 | 航空航天系列.耐热钢制37度球形管接头.端部焊接的90度弯管接头.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Elbow 90 o nipples, welded end - Inch series.) |
| NF L43-630-2003 | 航空航天系列.耐热钢制37度球形管接头.加螺纹直活管节.英制 | (erospace series - Pipe coupling 37 o, spherical, in heat resisting steel - Straight unions, threaded - Inch series.) |
| NF L43-631-2003 | 航空航天系列.耐热钢制37度球形管接头.端部焊接的箍.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - ferrules, welded end - Inch series.) |
| NF L43-632-2003 | 航空航天系列.耐热钢制37度管接头.管套组件.英制 | (Aerospace series - Pipe coupling, 37 o, in heat resisting steel - Cap assemblies - Inch series.) |
| NF L43-633-2003 | 航空航天系列.耐热钢制37度球形管接头.端部焊接的三通接头.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Tees nipples, welded end - Inch series.) |
| NF L43-634-2003 | 航空航天系列.高达21000 kPa的37度球形管接头.英制.技术规范 | (Aerospace series - Pipe coupling, 37 o, spherical, up to 21 000 kPa - Inch series - Technical specification.) |
| NF L43-635-2003 | 航空航天系列.耐热钢制焊接管接头.90度弯头.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbows 90 o - Inch series.) |
| NF L43-636-2003 | 航空航天系列.耐热钢制焊接管接头.减速器.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series.) |
| NF L43-637-2003 | 航空航天系列.耐热钢制焊接管接头.三通管.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series.) |
| NF L44-515-1989 | 航空和航天流体装置里的供氧接头 | (Aerospace. Gaseous oxygen replenishment for use in fluid systems (old type). Dimensions (inch series).) |
| NF L44-615-1989 | 航空和航天.液体系统用的液态氧的.注入接头尺寸(英制) | (Aerospace. Gaseous oxygen replenishment for use in fluid systems (new type). Dimensions (inch series).) |
| NF L45-101-1987 | 航空和航天.液力、压力补偿或变量输送泵.一般要求 | (Aerospace. Hydraulic, pressure compensated, variable delivery pumps. General requirements.) |
| NF L45-201-1991 | 航空和航天.恒排量液压马达.总规范 | (Aerospace. Constant displacement hydraulic motors. General specifications.) |
| NF L46-017-1998 | 航空航天系列.O型环.碳氟化合物橡胶(FKM),低压缩装置.硬度80 | (Aerospace series. O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD.) |
| NF L46-018-2002 | 航空航天系列.管连接件.温度范围:-55℃～ 135 ℃75 IRHD的晴基丁二烯橡胶(NBR)的O型密封圈 | (Aerospace series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, temperature range : - 55 oC to + 135 oC.) |
| NF L46-020-1998 | 航空航天系列.O型环.碳氟化合物橡胶(FKM),低压缩装置.技术规范 | (Aerospace series. O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification.) |
| NF L46-021-2002 | 航空航天系列.O形密封环凹槽.尺寸 | (Aerospace series - O-ring grooves - Dimensions.) |
| NF L46-210-1989 | 航空和航天.流体装置用环形压板的制造尺寸 | (AEROSPACE. “P“ CLAMPS (LOOP CLAMPS) FOR FLUID SYSTEMS. ENVELOPE DIMENSIONS.) |
| NF L46-211-1988 | 航空航天.流体系统用奥米加夹紧装置(骑马螺栓).尺寸 | (AEROSPACE. OMEGA CLAMPS (SADDLE CLAMPS) FOR FLUID SYSTEMS. DIMENSIONS.) |
| NF L46-212-1988 | 航空航天.流体系统用奥米加夹紧装置(中心安装式).尺寸 | (AEROSPACE. “Q CLAMPS“ (CENTRE-MOUNTED CLAMPS) FOR FLUID SYSTEMS. DIMENSIONS.) |
| NF L46-226-2002 | 航空航天系列.以橡胶垫层钝化的耐腐蚀钢制环形(P型)夹件.尺寸和质量 | (Aerospace series - Clamps, loop (“P“ type) in corrosion resisting steel, passivated with rubber crushioning - Dimensions, masses.) |
| NF L46-227-2002 | 航空航天系列.有橡胶垫层的铝制环形(P形)夹件.尺寸和质量 | (Aerospace series - Clamps, loop (“P“ type) in aluminium alloy with rubber cushioning - Dimensions, masses.) |
| NF L46-240-2002 | 航空航天系列.在铝合金中带橡胶垫的固定和移动式支架夹具.尺寸和重量 | (Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses.) |
| NF L46-241-2002 | 航空航天系列.夹件用橡胶垫层.尺寸、质量 | (Aerospace series - Cushion, rubber for clamps - Dimensions, masses.) |
| NF L46-250-1987 | 航空和航天.流体系统.管路轴线可调节压块.设计标准和合格试验.米制系列 | (AEROSPACE. FLUID SYSTEMS. CLAMP BLOCKS FOR TUBE LINES HAVING AXIAL ALIGNMENT. DESIGN STANDARD AND QUALIFICATION TESTING. METRIC SERIES.) |
| NF L46-331-2002 | 航空航天系列.8°30'钛合金管接头.压合栓 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Pressure plugs.) |
| NF L46-332-2002 | 航空航天系列.钛合金 8°30'管接头.带动态梁密封端的单头卡套 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, blind, with dynamic beam seal end.) |
| NF L46-333-2002 | 航空航天系列.8°30'钛合金管连接件.带锁紧环的截止管 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Blanking plugs with lockring.) |
| NF L46-334-2002 | 航空航天系列.8°30'管接头.螺母防护帽 | (Aerospace series - Pipe coupling 8 o30' - Protective caps.) |
| NF L46-335-2002 | 航空航天系列.8°30'接头.外螺纹防护栓 | (Aerospace series - Pipe coupling 8 o30' - Protective plugs with external threads.) |
| NF L46-336-2002 | 航空航天系列.8°30'接头.内螺纹防护栓 | (Aerospace series - Pipe coupling 8 o30' - Protective caps with internal threads.) |
| NF L46-341-2002 | 航空航天系列.钛合金直通垫圈 | (Aerospace series - Washers, bulkhead in titanium alloy.) |
| NF L46-342-2002 | 航空航天系列.焊接管用钛合金三通垫环 | (Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure.) |
| NF L46-343-2002 | 航空航天系列.焊接管用钛合金三通垫环.28 000 kPa大气压 | (Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure.) |
| NF L46-344-2002 | 航空航天系列.耐热钢垫圈 | (Aerospace series - Washers in heat resisting steel.) |
| NF L46-614-2003 | 航空航天系列.合金钢FE-PA3903制弹簧张力夹 | (Aerospace series - Clips, spring tension, in alloy steel FE-PA3903.) |
| NF L50-001-1992 | 航空航天系列.飞行器电源特性 | (AEROSPACE SERIES. CHARACTERISTICS OF AIRCRAFT ELECTRICAL SUPPLIES. (EUROPEAN STANDARD EN 2282).) |
| NF L50-050-1996 | 航空和航天.检验飞机上电缆的敷设 | (AEROSPACE SERIES. TESTING OF AIRCRAFT WIRING. (EUROPEAN STANDARD EN 2283).) |
| NF L52-230-2001 | 航空航天系列.电缆用铜或铜合金导体.产品标准 | (Aerospace series - Copper or copper alloy conductors for electrical cables - Product standard.) |
| NF L52-250-100-2002 | 航空航天系列.飞行器用电缆.试验方法.第100部分:总则 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100 : general.) |
| NF L52-250-201-2002 | 航空航天系列.飞行器用电缆.试验方法.第201部分:外观检查 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201 : visual examination.) |
| NF L52-250-202-2002 | 航空航天系列.飞行器用电缆.试验方法.第202部分:质量 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202 : mass.) |
| NF L52-250-301-2002 | 航空航天系列.飞行器用电缆.试验方法.第301部分:每单位长度的欧姆律电阻 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301 : ohmic resistance per unit length.) |
| NF L52-250-302-2002 | 航空航天系列.飞行器用电缆.试验方法.第302部分:电压验算试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 302 : voltage proof test.) |
| NF L52-250-303-2002 | 航空航天系列.飞行器用电缆.试验方法.第303部分:绝缘电阻 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303 : insulation resistance.) |
| NF L52-250-304-2002 | 航空航天系列.飞行器用电缆.试验方法.第304部分:表面电阻 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304 : surface resistance.) |
| NF L52-250-305-2002 | 航空航天系列.飞行器用电缆.试验方法.第305部分:过载电阻 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305 : overload resistance.) |
| NF L52-250-401-2002 | 航空航天系列.飞行器用电缆.试验方法.第401部分:加速老化 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 401 : accelerated ageing.) |
| NF L52-250-402-2002 | 航空航天系列.飞行器用电缆.试验方法.第402部分:收缩和剥离 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402 : shrinkage and delamination.) |
| NF L52-250-403-2002 | 航空航天系列.飞行器用电缆.试验方法.第403部分:剥离和粘连 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403 : delamination and blocking.) |
| NF L52-250-404-2002 | 航空航天系列.飞行器用电缆.试验方法.第404部分:热冲击 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404 : thermal shock.) |
| NF L52-250-405-2002 | 航空航天系列.飞行器用电缆.试验方法.第405部分:室温下的弯曲试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405 : bending at ambient temperature.) |
| NF L52-250-406-2002 | 航空航天系列.飞行器用电缆.试验方法.第406部分:低温弯曲试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406 : cold bend test.) |
| NF L52-250-407-2002 | 航空航天系列.飞行器用电缆.试验方法.第407部分:易燃性 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407 : flammability.) |
| NF L52-250-409-2002 | 航空航天系列.飞行器用电缆.试验方法.第409部分:真空老化试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409 : air-excluded ageing.) |
| NF L52-250-410-2002 | 航空航天系列.飞行器用电缆.试验方法.第410部分:耐热性 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410 : thermal endurance.) |
| NF L52-250-412-2003 | 航空航天系列.飞行器用电缆.试验方法.第412部分:耐湿性 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412 : humidity resistance.) |
| NF L52-250-413-2003 | 航空航天系列.飞行器用电缆.试验方法.第413部分:回卷绕试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413 : wrap back test.) |
| NF L52-250-501-2002 | 航空航天系列.飞行器用电缆.试验方法.第501部分:动态开割试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501 : dynamic out-through.) |
| NF L52-250-502-2002 | 航空航天系列.飞行器用电缆.试验方法.第502部分:切口延伸 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502 : notch propagation.) |
| NF L52-250-503-2002 | 航空航天系列.飞行器用电缆.试验方法.第503部分:摩擦损伤试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503 : scrape abrasion.) |
| NF L52-250-504-2002 | 航空航天系列.飞行器用电缆.试验方法.第504部分:扭转 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504 : torsion.) |
| NF L52-250-505-2002 | 航空航天系列.飞行器用电缆.试验方法.第505部分:导线和绞线的拉伸试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505 : tensile test on conductors and strands.) |
| NF L52-250-506-2002 | 航空航天系列.飞行器用电缆.试验方法.第506部分:镀层连续性 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506 : plating continuity.) |
| NF L52-250-507-2002 | 航空航天系列.飞行器用电缆.试验方法.第507部分:镀层的粘结强度 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507 : adherence of plating.) |
| NF L52-250-508-2003 | 航空航天系列.飞行器用电缆.试验方法.第508部分:电镀板厚度 | (Aerospace series - Cables, electrical, aircraft use - Test mehtods - Part 508 : plating thickness.) |
| NF L52-250-509-2003 | 航空航天系列.飞行器用电缆.试验方法.第509部分:可焊性 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509 : solderability.) |
| NF L52-250-510-2003 | 航空航天系列.飞行器用电缆.试验方法.第510部分:挤压绝缘护套和包装材料的抗拉强度和延伸度 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510 : tensile strength and elongation of extruded insulation, sheath and jacket material.) |
| NF L52-250-511-2003 | 航空航天系列.飞行器用电缆.试验方法.第511部分:电缆间的磨损 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511 : cable-to-cable abrasion.) |
| NF L52-250-512-2003 | 航空航天系列.飞行器用电缆.试验方法.第512部分:耐弯曲 | (Aerospace series - Cables, electrical, aircarft use - Test methods - Part 512 : flexure endurance.) |
| NF L52-250-603-2003 | 航空航天系列.飞行器用电缆.试验方法.第603部分:耐湿电弧痕迹性 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603 : resistance to wet arc tracking.) |
| NF L52-250-604-2003 | 航空航天系列.飞行器用电缆.试验方法.第604部分:耐干电弧性 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604 : resistance to dry arc propagation.) |
| NF L52-250-605-2003 | 航空航天系列.飞行器用电缆.试验方法.第605部分:潮湿短路试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605 : wet short circuit test.) |
| NF L52-250-701-2002 | 航空航天系列.飞行器用电缆.试验方法.第508部分:导体绝缘层的可剥离性和粘结强度 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701 : strippability and adherence of insulation to the conductor.) |
| NF L52-250-702-2002 | 航空航天系列.飞行器用电缆.试验方法.第702部分:防护屏的后推移能力 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702 : screen pushback capability.) |
| NF L52-250-703-2002 | 航空航天系列.飞行器用电缆.试验方法.第703部分:制造商标记的持久性 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703 : permanence of manufacturer's marking.) |
| NF L52-250-704-2003 | 航空航天系列.飞行器用电缆.试验方法.第608部分:柔性试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704 : flexibility.) |
| NF L52-250-705-2003 | 航空航天系列.飞行器用电缆.试验方法.第705部分:比对测量 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705 : contrast measurement.) |
| NF L52-250-801-2003 | 航空航天系列.飞行器用电缆.试验方法.第801部分:单位长度电容量 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 801 : capacitance per unit length.) |
| NF L52-250-802-2003 | 航空航天系列.飞行器用电缆.试验方法.第802部分:容量平衡 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802 : capacitance unbalance.) |
| NF L52-250-803-2003 | 航空航天系列.飞行器用电缆.试验方法.第803部分:容量偏差 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803 : capacitance variation.) |
| NF L52-250-804-2003 | 航空航天系列.飞行器用电缆.试验方法.第804部分:传输速度 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 804 : velocity of propagation.) |
| NF L52-250-805-2003 | 航空航天系列.飞行器用电缆.试验方法.第805部分:阻抗特性 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805 : characteristic impedance.) |
| NF L52-250-806-2003 | 航空航天系列.飞行器用电缆.试验方法.第806部分:信号衰减 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806 : attenuation.) |
| NF L52-250-807-2003 | 航空航天系列.飞行器用电缆.试验方法.第807部分:传输阻抗 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807 : transfer impedance.) |
| NF L52-250-808-2003 | 航空航天系列.飞行器用电缆.试验方法.第808部分:串音 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808 : cross-talk.) |
| NF L52-400-201-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第201部分:外观检查 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 201 : visual examination.) |
| NF L52-400-205-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第205:光缆纵向尺寸的稳定性 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 205 : cable longitudinal dimensional stability.) |
| NF L52-400-301-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第301部分:衰减性 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301 : attenuation.) |
| NF L52-400-302-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第302部分:数值孔径 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 302 : numerical aperture.) |
| NF L52-400-305-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第305部分:对周围光耦合的抗扰性 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 305 : immunity to ambient light coupling.) |
| NF L52-400-504-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第504部分:微弯曲试验 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504 : micro bending test.) |
| NF L52-400-507-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第507部分:切割强度 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 507 : cut-through.) |
| NF L52-400-508-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第508部分:扭转力 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 508 : torsion.) |
| NF L52-400-509-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第509部分:扭结试验 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 509 : kink test.) |
| NF L52-400-510-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第510部分:弯曲试验 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510 : bending test.) |
| NF L52-400-511-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第511部分:光缆间的磨蚀 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 511 : cable to cable abrasion.) |
| NF L52-400-701-2003 | 航空航天系列.飞行器用光纤和光缆.试验方法.第701部分:可剥离性 | (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 701 : strippability.) |
| NF L54-002-002-1994 | 航空航天系列.电气及光学连接的元件.试验方法.第101部分:表观检验 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 101 : visual examination.) |
| NF L54-002-003-1994 | 航空航天系列.电气及光学连接的元件.试验方法.第A02部分:尺寸和质量的检查 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 102 : examination of dimensions and mass.) |
| NF L54-002-004-1993 | 航空航天系列.电气及光学连接的元件.试验方法.第201部分:抗接触-低空 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 201 : contact resistance - Low level.) |
| NF L54-002-005-1994 | 航空航天系列.电气及光学连接的元件.试验方法.第B2部分:额定电流下耐接触 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 202 : contact resistance at rated current.) |
| NF L54-002-006-1994 | 航空航天系列.电气及光学连接的元件.试验方法.第B3部分:微伏水准上电气连续性 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 203 : electrical continuity at microvolt level.) |
| NF L54-002-007-1994 | 航空航天系列.电气及光学连接的元件.试验方法.第B4部分:微秒范围内接触器的非连续性 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 204 : discontinuity of contacts in the microsecond range.) |
| NF L54-002-008-1994 | 航空航天系列.电气及光学连接的元件.试验方法.第B5部分:住房电气通路 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 205 : housing (shell) electrical continuity.) |
| NF L54-002-009-1994 | 航空航天系列.电气及光学连接的元件.试验方法.第B6部分:耐绝缘的测量 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 206 : measurement of insulation resistance.) |
| NF L54-002-01-1993 | 航空航天系列.电气及光学连接的元件.一般试验方法 | (Aerospace series. Elements of electrical and optical connection. Test methods. General.) |
| NF L54-002-010-1994 | 航空航天系列.电气及光学连接的元件.试验方法.第B7部分:耐电压试验 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 207 : voltage proof test.) |
| NF L54-002-011-1994 | 航空航天系列.电气及光学连接的元件.试验方法.第B8部分:额定电流引起的温升 | (Aerospace series. Elements of electrical and optical conneciton. Test methods. Part 208 : temperature rise due to rated current.) |
| NF L54-002-012-1994 | 航空及航天系列.电气及光学连接元件.第B9部分:当前温度降低额定值 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 209 : current temperature derating.) |
| NF L54-002-013-1998 | 航空航天系列.电气及光学连接元件.试验方法.第210部分:电过载 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 210 : electrical overload.) |
| NF L54-002-014-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第211部分:电容量 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 211 : capacitance.) |
| NF L54-002-016-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第213部分:由100MHZ-1GHZ的屏蔽效应 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 213 : shielding effectiveness from 100 MHz to 1 GHz.) |
| NF L54-002-018-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第217部分:终端插片和内连接件用特定电流下的电压降 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 217 : voltage drop under specified current for terminal lugs and in-line splices.) |
| NF L54-002-019-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第216部分:接触点的预订深度 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 216 : engagement depth of contacts.) |
| NF L54-002-020-1993 | 航空航天系列.电气及光学连接的元件.试验方法.第301部分:室温耐久性 | (Aerospace series. Element of electrical and optical connection. Test methods. Part 301 : endurance at temperature.) |
| NF L54-002-021-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第302部分:气候后果 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 302 : climatic sequence.) |
| NF L54-002-022-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第303部分:冷/低压和潮热 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 303 : cold/low pressure and damp heat.) |
| NF L54-002-023-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第304部分:潮热稳定状态 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 304 : damp heat steady state.) |
| NF L54-002-024-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第305部分:温度的快速变化 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 305 : rapid change of temperature.) |
| NF L54-002-025-1998 | 航空航天系列.电气及光学连接元件.试验方法.第306部分:长霉 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 306 : mould growth.) |
| NF L54-002-026-1998 | 航空航天系列.电气及光学连接元件.试验方法.第307部分:盐雾 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 307 : salt mist.) |
| NF L54-002-027-1998 | 航空航天系列.电气及光学连接元件.试验方法.第308部分:沙和灰尘 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 308 : sand and dust.) |
| NF L54-002-028-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第309部分:干热 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 309 : dry heat.) |
| NF L54-002-029-1998 | 航空航天系列.电气及光学连接元件.试验方法.第310部分:寒冷 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 310 : cold.) |
| NF L54-002-030-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第311部分:低气压 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 311 : low air pressure.) |
| NF L54-002-031-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第312部分:空间链接 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 312 : air leakage.) |
| NF L54-002-032-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第313部分:人工降雨 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 313 : artificial rain.) |
| NF L54-002-033-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第313部分:低空气压下的浸入 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 314 : immersion at low air pressure.) |
| NF L54-002-034-1998 | 航空航天系列.电气及光学连接元件.试验方法.第315部分:耐液体性 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 315 : fluid resistance.) |
| NF L54-002-035-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第316部分:臭氧抗性 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 316 : ozone resistance.) |
| NF L54-002-036-1998 | 航空航天系列.电气及光学连接元件.试验方法.第317部分:可燃性 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 317 : flammability.) |
| NF L54-002-037-1998 | 航空航天系列.电气及光学连接元件.试验方法.第318部分:耐火性 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 318 : fire-resistance.) |
| NF L54-002-038-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第319部分:非焊包裹连接的气体致密度 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 319 : gastightness of solderless wrapped connections.) |
| NF L54-002-039-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第320部分:在地面防太阳辐射 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 320 : simulated solar radiation at ground level.) |
| NF L54-002-040-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第321部分:湿热.循环试验 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 321 : damp heat, cyclic test.) |
| NF L54-002-041-1998 | 航空航天系列.电气及光学连接元件.试验方法.第322部分:密封性 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 322 : hermeticity.) |
| NF L54-002-042-1998 | 航空航天系列.电气及光学连接元件.试验方法.第323部分:热冲击 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 323 : thermal shock.) |
| NF L54-002-043-1998 | 航空航天系列.电气及光学连接元件.试验方法.第324部分:界面密封 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 324 : interfacial sealing.) |
| NF L54-002-044-1993 | 航空航天系列.电气及光学连接的元件.试验方法.第401部分:稳定状态下的加速度 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 401 : acceleration, steady state.) |
| NF L54-002-045-1998 | 航空航天系列.光电连接元件.试验方法.第402部分:冲击.(欧洲标准 EN 2591-402) | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 402 : shock.) |
| NF L54-002-046-1998 | 航空航天系列.光电连接元件.试验方法.第403部分:正弦和随机波动(欧洲标准 EN 2591-403) | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 403 : sinusoidal and random vibration.) |
| NF L54-002-047-1998 | 航空航天系列.光电连接元件.试验方法.第404部分:横向负载(欧洲标准 EN 2591-404) | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 404 : transverse load.) |
| NF L54-002-048-1998 | 航空航天系列.光电连接元件.试验方法.第405部分:轴负载(欧洲标准 EN 2591-405) | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 405 : axial load.) |
| NF L54-002-049-1998 | 航空航天系列.光电连接元件.试验方法.第406部分:机械耐力(欧洲标准 EN 2591-406) | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 406 : mechanical endurance.) |
| NF L54-002-050-1999 | 航空航天系列.电气及光学连接的元件.试验方法.第407部分:接触保持系统和密封的耐久性 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 407 : durability of contact retention system and seals.) |
| NF L54-002-051-1998 | 航空航天系列.光电连接元件.试验方法.第408部分:配合和非配合力(欧洲标准 EN 2591-408) | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 408 : mating and unmating forces.) |
| NF L54-002-052-1999 | 航空航天系列.电气及光学连接的元件.试验方法.第409部分:触点插入保持 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 409 : contact retention in insert.) |
| NF L54-002-053-1998 | 航空航天系列.光电连接元件.试验方法.第410部分:外壳插入阻滞(欧洲标准 EN 2591-410) | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 410 : insert retention in housing (axial).) |
| NF L54-002-054-1998 | 航空航天系列.光电连接元件.试验方法.第410部分:外壳插入阻滞(扭力)(欧洲标准 EN 2591-411) | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 411 : insert retention in housing (torsional).) |
| NF L54-002-055-1999 | 航空航天系列.电气及光学连接的元件.试验方法.第412部分:触点插拔力 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 412 : contact insertion and extraction forces.) |
| NF L54-002-056-1998 | 航空航天系列.光电连接元件.试验方法.第413部分:持力和弹簧系统(欧洲标准2591-413) | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 413 : holding force or grounding spring system.) |
| NF L54-002-057-1998 | 航空航天系列.光电连接元件.试验方法.第414部分:拉火绳放松连接件的不配合(欧洲标准2591-414) | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 414 : unmating of lanyard release connectors.) |
| NF L54-002-058-2002 | 航空航天系列.电气及光学连接元件.试验方法.第415部分:检测探针损伤(塞孔接点) | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 415 : test probe damage (female contacts).) |
| NF L54-002-059-2002 | 航空航天系列.电气及光学连接元件.试验方法.第416部分:触点弯曲强度 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 416 : contact bending strength.) |
| NF L54-002-060-2002 | 航空航天系列.电气及光学连接元件.试验方法.第417部分:抗拉强度(压接) | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 417 : tensile strength (crimped connection).) |
| NF L54-002-061-2002 | 航空航天系列.电气及光学连接元件.试验方法.第418部分:量规插入/拔出力(塞孔接点) | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 418 : gauge insertion/extraction forces (female contacts).) |
| NF L54-002-062-2002 | 航空航天系列.电气及光学连接元件.试验方法.第419部分:插件插头的稳定性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 419 : stability of male contacts in insert.) |
| NF L54-002-063-2002 | 航空航天系列.电气及光学连接元件.试验方法.第420部分:后部附件的机械强度 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 420 : mechanical strength of rear accessories.) |
| NF L54-002-064-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第421部分:自由降落 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 421 : free fall.) |
| NF L54-002-065-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第422部分:锁定线强度 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 422 : locking wire hole strength.) |
| NF L54-002-067-2002 | 航空航天系列.电气及光学连接元件.试验方法.第424部分:无钎焊缠绕连接的剥离力 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 424 : stripping force, solderless wrapped connections.) |
| NF L54-002-068-2002 | 航空航天系列.电气及光学连接元件.试验方法.第425部分:无钎焊缠绕连接的退绕能力 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 425 : unwrapping, solderless wrapped connections.) |
| NF L54-002-069-2002 | 航空航天系列.电气及光学连接元件.试验方法.第426部分:接触保持系统的有效性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 426 : contact retention system effectiveness.) |
| NF L54-002-070-2002 | 航空航天系列.电气及光学连接元件.试验方法.第427部分:护层附件的坚固性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 427 : robustness of protective cover attachment.) |
| NF L54-002-071-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第501部分:软钎焊性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 501 : soft solderability.) |
| NF L54-002-072-2002 | 航空航天系列.电气及光学连接元件.试验方法.第428部分:束口 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 502 : restricted entry.) |
| NF L54-002-073-2002 | 航空航天系列.电气及光学连接元件.试验方法.第503部分:压接后的触点变形 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 503 : contact deformation after crimping.) |
| NF L54-002-075-2002 | 航空航天系列.电气及光学连接元件.试验方法.第505部分:触点保护效果(防碰擦) | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 505 : contact protection effectiveness (scoop-proof).) |
| NF L54-002-076-2002 | 航空航天系列.电气及光学连接元件.试验方法.第506部分:工具的使用 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 506 : use of tools.) |
| NF L54-002-077-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第507部分:电镀多孔性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 507 : plating porosity.) |
| NF L54-002-078-2002 | 航空航天系列.电气及光学连接元件.试验方法.第508部分:触点涂层厚度的测量 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 508 : measurement of thickness of coating on contacts.) |
| NF L54-002-079-2002 | 航空航天系列.电气及光学连接元件.试验方法.第509部分:触点涂层的粘附性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 509 : adhesion of coating on contacts.) |
| NF L54-002-080-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第512部分:密封的连接件外壳的非移动固定件的效果 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 512 : effectiveness of non-removable fixing of hermetically sealed connector shell.) |
| NF L54-002-081-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第513部分:磁导率 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 513 : magnetic permeability.) |
| NF L54-002-082-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第514部分:自带焊料和助熔剂(材料)接触片的可焊接性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 514 : solderability of contacts with self-contained solder and flux.) |
| NF L54-002-083-2002 | 航空航天系列.电气及光学连接元件.试验方法.第601部分:光学元件.介入损耗 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 601 : optical elements - Insertion loss.) |
| NF L54-002-084-2002 | 航空航天系列.电气及光学连接元件.试验方法.第602部分:光学元件.衰减和光学不连续性的变化 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 602 : optical elements - Variation of attenuation and optical discontinuity.) |
| NF L54-002-085-2003 | 航空航天系列.电气和光学连接元件.试验方法.第603部分:配电的变化 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 603 : change of power distribution.) |
| NF L54-002-086-2002 | 航空航天系列.电气及光学连接元件.试验方法.第604部分:光学元件.光学表面的净化能力 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 604 : optical elements - Cleaning capability of optical face.) |
| NF L54-002-087-2003 | 航空航天系列.电气和光学连接元件.试验方法.第605部分:光学元件.回程损耗 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 605 : optical elements - Return loss.) |
| NF L54-002-088-2003 | 航空航天系列.电气和光学连接元件.试验方法.第605部分:光学元件.串音 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 606 : optical elements - Crosstalk.) |
| NF L54-002-089-2003 | 航空航天系列.电气和光学连接元件.试验方法.第607部分:光学元件.对周围光耦合的抗扰性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 607 : optical elements - Immunity to ambient light coupling.) |
| NF L54-002-092-2002 | 航空航天系列.电气及光学连接元件.试验方法.第610部分:光学元件.电缆的附着效果.电缆拉力 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 610 : optical elements - Effectiveness of cable attachment - Cable pulling.) |
| NF L54-002-093-2002 | 航空航天系列.电气及光学连接元件.试验方法.第611部分:光学元件.电缆的附着效果.电缆扭转 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 611 : optical elements - Effectiveness of cable attachment - Cable torsion.) |
| NF L54-002-094-2002 | 航空航天系列.电气及光学连接元件.试验方法.第612部分:光学元件.电缆的附着效果.电缆轴向压缩 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 612 : optical elements - Effectiveness of cable attachment - Cable axial compression.) |
| NF L54-002-095-2003 | 航空航天系列.电气和光学连接元件.试验方法.第613部分:光学元件.冲击试验 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 613 : optical elements - Impact test.) |
| NF L54-002-096-2003 | 航空航天系列.电气和光学连接元件.试验方法.第614部分:光学元件.连接件径向压缩 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 614 : optical elements - Connector radial compression.) |
| NF L54-002-097-2002 | 航空航天系列.电气及光学连接元件.试验方法.第615部分:光学元件.电缆附件的效率.热环境下的连接完整性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 615 : optical elements - Connection integrity at temperature.) |
| NF L54-002-099-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第218部分:电流循环老化终端电插片和内连接件 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 218 : ageing of terminal lugs and in-line splices by temperature and current cycling.) |
| NF L54-002-105-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6101部分:光学元件.外观检查 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6101 : optical elements - Visual examination.) |
| NF L54-002-106-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6301部分:光学元件.耐热性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301 : optical elements - Endurance at temperature.) |
| NF L54-002-107-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6303部分:光学元件.低温/低压和湿热试验 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6303 : optical elements - Cold/low pressure and damp heat.) |
| NF L54-002-108-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6305部分:光学元件.温度的快速变化试验 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6305 : optical elements - Rapid change of temperature.) |
| NF L54-002-109-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6306部分:光学元件.长霉试验 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6306 : optical elements - Mould growth.) |
| NF L54-002-110-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6307部分:光学元件.盐雾试验 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6307 : optical elements - Salt mist.) |
| NF L54-002-117-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6314部分:光学元件.低气压下的浸入 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6314 : optical elements - Immersion at low air pressure.) |
| NF L54-002-118-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6315部分:光学元件.耐液体性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6315 : optical elements - Fluid resistance.) |
| NF L54-002-119-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6316部分:光学元件.耐臭氧性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6316 : optical elements - Ozone resistance.) |
| NF L54-002-120-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6317部分:光学元件.易燃性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6317 : optical elements - Flammability.) |
| NF L54-002-121-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6318部分:光学元件.耐火性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6318 : optical elements - Fire resistance.) |
| NF L54-002-122-2003 | 航空航天系列.电气和光学连接元件.试验方法.第6321部分:光学元件.湿热循环试验 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321 : optical elements - Damp heat, cyclic test.) |
| NF L54-002-123-2003 | 航空航天系列.电气和光学连接元件.试验方法.第6323部分:光学元件.热冲击(密封装置) | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6323 : optical elements - Thermal shock (Hermetically sealed devices).) |
| NF L54-002-124-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6324部分:光学元件.界面间密封 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324 : optical elements - Interfacial sealing.) |
| NF L54-002-125-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6401部分:光学元件.稳定状态下的加速度 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401 : optical elements - Acceleration steady state.) |
| NF L54-002-126-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6402部分:光学元件.冲击 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402 : optical elements - Shock.) |
| NF L54-002-127-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6403部分:光学元件.振动 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6403 : optical elements - Vibrations.) |
| NF L54-002-128-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6404部分:光学元件.横向负载 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404 : optical elements - Transverse load.) |
| NF L54-002-129-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6405部分:光学元件.轴向负载 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6405 : optical elements - Axial load.) |
| NF L54-002-130-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6406部分:光学元件.机械耐久性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6406 : optical elements - Mechanical endurance.) |
| NF L54-002-131-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6414部分:光学元件.拉索脱扣式光学连接元件的不匹配性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6414 : optical elements - Unmating of lanyard release optical connection elements.) |
| NF L54-002-132-2002 | 航空航天系列.电气及光学连接元件.试验方法.第6415部分:光学元件.检测探针损伤 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415 : optical elements - Test probe damage.) |
| NF L54-002-141-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第219部分:绝缘终端电插片和内连接件电压强度 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 219 : voltage strength for insulated terminal lugs and in-line splices.) |
| NF L54-002-142-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第325部分:防冻性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 325 : ice resistance.) |
| NF L54-002-143-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第428部分:夹具终端电连接片过电流正弦波振荡 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 428 : sinusoidal vibrations with passage of current for crimped terminal lugs.) |
| NF L54-002-145-2003 | 航空航天系列.电气和光学连接元件.试验方法.第617部分:光学元件.温度循环 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 617 : optical elements - Temperature cycling.) |
| NF L54-002-156-2002 | 航空航天系列.电气及光学连接元件.试验方法.第7301部分:电气元件.耦合器的耐热性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 7301 : electrical elements - Temperature endurance of couplers.) |
| NF L54-002-157-2002 | 航空航天系列.电气及光学连接元件.试验方法.第701部分:电气元件.耦合器开路阻抗的测量 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 701 : electrical elements - Measurement of open circuit impedance of couplers.) |
| NF L54-002-158-2002 | 航空航天系列.电气及光学连接元件.试验方法.第702部分:电气元件.耦合器的信号失真测量 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 702 : electrical elements - Measurement of signal distortion of couplers.) |
| NF L54-002-159-2002 | 航空航天系列.电气及光学连接元件.试验方法.第703部分:电气元件.耦合器的共态抑制 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 703 : electrical elements - Common mode rejection of couplers.) |
| NF L54-002-160-2002 | 航空航天系列.电气及光学连接元件.试验方法.第704部分:电气元件.耦合器用变压器的匝数比测量 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 704 : electrical elements - Measurement of turns ratio on a transformer used in a coupler.) |
| NF L54-002-161-2002 | 航空航天系列.电气及光学连接元件.试验方法.第705部分:电气元件.耦合器的短线输入阻抗测量 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 705 : electrical elements - Measurement of stub input impedance of couplers.) |
| NF L54-002-162-2002 | 航空航天系列.电气及光学连接元件.试验方法.第706部分:电气元件.传输试验 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 706 : electrical elements - Transmission test.) |
| NF L54-002-163-2002 | 航空航天系列.电气及光学连接元件.试验方法.第707部分:电气元件.总线或短线端子的特征阻抗测量 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 707 : electrical elements - Measurement of characteristic impedance of a bus or a stub terminator.) |
| NF L54-002-164-2002 | 航空航天系列.电气及光学连接元件.试验方法.第708部分:电气元件.耦合器的表面传输阻抗测量 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 708 : electrical elements - Measurement of surface transfer impedance of couplers.) |
| NF L54-002-165-2002 | 航空航天系列.电气及光学连接元件.试验方法.第709部分:电气元件.耦合器的抗拉强度 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 709 : electrical elements - Tensile strength of couplers.) |
| NF L56-250-1996 | 航空航天系列.镍镉电池.技术规范(欧洲标准EN 2570) | (Aerospace series. Nickel-cadmium batteries. Technical specification.) |
| NF L56-251-1996 | 航空航天系列.A型镍镉电池(欧洲标准EN 2985) | (Aerospace series. Nickel-cadmium batteries of format A type.) |
| NF L56-252-1996 | 航空航天系列.B型镍镉电池(欧洲标准EN 2986) | (Aerospace series. Nickel-cadmium batteries of format B type.) |
| NF L56-253-1996 | 航空航天系列.C型镍镉电池(欧洲标准EN 2987) | (Aerospace series. Nickel-cadmium batteries of format C type.) |
| NF L56-254-1996 | 航空航天系列.D型镍镉电池(欧洲标准EN 2988) | (Aerospace series. Nickel-cadmium batteries of format D type.) |
| NF L56-255-1996 | 航空航天系列.E型镍镉电池(欧洲标准EN 2991) | (Aerospace series. Nickel-cadmium batteries of format E type.) |
| NF L56-256-1996 | 航空航天系列.F型镍镉电池(欧洲标准EN 2993) | (Aerospace series. Nickel-cadmium batteries of format F type.) |
| NF L58-530-1990 | 航空航天系列.断路器.技术规范.(欧洲标准 EN 2350) | (Aerospace series. Circuit breakers. Technical specification.) |
| NF L58-531-1990 | 航空和航天系列.额定电流强度在25A以内的温度补偿式单极断路器.产品标准(欧洲标准 EN 2495) | (Aerospace series. Single-pole circuit breakers temperature compensated rated currents up to 25 A. Product standard.) |
| NF L58-532-1990 | 航空和航天系列.额定电流强度在25A以内的温度补偿三极断路器.产品标准.(欧洲标准 EN 5292) | (Aerospace series. Three-pole circuit breakers temperature compensated rated currents up to 25 A. Product standard.) |
| NF L60-250-001-2002 | 航空航天系列.符合MIL-STD-1553B的多路数据总线系统中使用的串联耦合器.第001部分:技术规范 | (Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 001 : technical specification.) |
| NF L60-250-003-2002 | 航空航天系列.符合MIL-STD-1553B的多路数据总线系统中使用的串联耦合器.第003部分:单一串联耦合器.产品标准 | (Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003 : single in-line couplers - Product standard.) |
| NF L60-250-004-2002 | 航空航天系列.符合MIL-STD-1553B的多路数据总线系统中使用的串联耦合器.第004部分:复式串联耦合器.产品标准 | (Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004 : double in-line couplers - Product standard.) |
| NF L63-010-1997 | 航天工业.机载恒压固定金属灭火器.技术规范和合格条件 | (AEROSPACE INDUSTRY. AIRBORNE, STATIONARY, PERMANENT PRESSURE, FIXED METALLIC EXTINGUISHERS. TECHNICAL SPECIFICATION AND QUALIFICATION CONDITIONS.) |
| NF L76-001-1995 | 航空航天.可见显示装置.均匀背景上符号的视觉性能标准 | (AEROSPACE. VISUAL DISPLAY UNITS. VISUAL PERFORMANCE CRITERIAS FOR SYMBOLOGY ON A UNIFORM BACKGROUND.) |
| NF L76-010-1996 | 航空航天系列.控制和显示元素.非重新组合键盘交互性正面功能定义 | (AEROSPACE SERIES. CONTROL AND VIEWING ELEMENTS. DEFINITION OF THE FUNCTIONS OF AN INTERACTIVE FRONT FACE BASED ON NON-RECONFIGURATING KEYBOARDS.) |
| NF L76-011-1997 | 航空航天系列.控制和显示元素.人-机对话正面.技术规范 | (AEROSPACE SERIES. CONTROL AND VIEWING ELEMENTS. INTERACTIVE FRONT FACE. TECHNICAL SPECIFICATION.) |
| NF L83-100-1990 | 航空和航天工业.有或无电加热元件的透明件.分类.质量和验收条件 | (AEROSPACE INDUSTRY. TRANSPARENT ELEMENT WITH OR WITHOUT ELECTRICAL HEATING. CLASSIFICATION. QUALIFICATION. RECEPTION.) |
| NF L90-001-1-2001 | 航天工程管理.一般要求.政策和规则 | (Space project management - General requirements - Part 1 : policy and principles.) |
| NF L90-221-2002 | 航天产品保证.不一致性控制系统 | (Space product assurance - Nonconformance control system.) |
| NF L90-271-2002 | 航天产品保证.航天材料和工艺筛选的热循环试验 | (Space product assurance - Thermal cycling test for the screening of space materials and processes.) |
| NF L90-272-2002 | 航天产品保证.用压敏带测量涂层的剥离和撕开强度 | (Space product assurance - Measurement of the peel and pull-off strenght of coatings and finishes using pressure sensitive tapes.) |
| NF L90-273-2002 | 航天产品保证.人造航天器机舱使用的材料和安装物品的脱气产品的测定 | (Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment.) |
| NF L90-274-2002 | 航天产品保证.应力腐蚀断裂控制用材料的选择 | (Space product assurance - Material selection for controlling stress-corrosion cracking.) |
| NF L90-401-2003 | 航天系统.风险管理 | (Space systems - Risk management.) |
| NF L95-011-2003 | 航天产品保证.筛选航天材料用的可燃性能试验 | (Space product assurance - Flammability testing for the screening of space materials.) |
| NF L95-012-2002 | 航天产品保证.航天材料筛选的热真空除气试验 | (Space product assurance - Thermal vacuum outgassing test for the screening of space materials.) |
| NF L95-013-2003 | 航天工程.航天环境 | (Space engineering - Space environment.) |
| NF L95-014-2002 | 航天项目管理.综述的组织和规划 | (Spave project management - Organisation and conduct of reviews.) |
| NF L95-015-2002 | 航天工程.软件 | (Space engineering - Software.) |
| NF L95-016-2003 | 航天产品保证.储存期受限制材料的管理 | (Space product assurance - The control of limited shelf-life materials.) |
| 编号 | 中文名称 | 英文名称 |