编号 | 中文名称 | 英文名称 |
BS 2000-168-2005
| 石油及其产品试验方法.润滑脂滚动轴承性能测定
| Methods of test for petroleum and its products - Determination of rolling bearing performance of lubricating grease
|
BS 3134-1-1979
| 米制锥形滚子轴承.第1部分:单列轴承尺寸公差规范
| Metric tapered roller bearings - Specification for dimensions and tolerances of single row bearings
|
BS 3134-2-1981
| 米制锥形滚柱轴承.第2部分:双列轴承尺寸规范
| Metric tapered roller bearings - Specification for dimensions of double row bearings
|
BS 3134-3-1981
| 米制锥形滚柱轴承.第3部分:外环凸缘尺寸规范
| Metric tapered roller bearings - Specification for dimensions of flanged cups
|
BS 3134-4-1992
| 米制锥形滚柱轴承.第4部分:命名制度规范
| Metric tapered roller bearings - Specification for designation system
|
BS 3332-1987
| 轴承用巴比合金锭规范
| Specification for white metal bearing alloy ingots
|
BS 3338-10-1961
| 锡及锡合金取样及分析方法.第10部分:锡锭、锡铅焊料及轴承用巴比合金中铁含量测定方法(光度测定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
|
BS 3338-13-1965
| 锡及锡合金取样及分析方法.第13部分:焊料及轴承用巴比合金中锑含量测定方法(溴酸钾容量法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)
|
BS 3338-14-1965
| 锡及锡合金的取样及分析方法.第14部分:轴承用巴比合金锭取样方法
| Methods for the sampling and analysis of tin and tin alloys - Method for the sampling of white metal bearing alloy ingots
|
BS 3338-15-1965
| 锡及锡合金取样及分析方法.第15部分:轴承用巴比合金中铜和铅含量测定方法(电解镀层法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)
|
BS 3338-16-1965
| 锡及锡合金取样及分析方法.第16部分:轴承用巴比合金中锡含量测定方法(镍带卷还原法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in white metal bearing alloys (nickel coil reduction method)
|
BS 3338-17-1965
| 锡及锡合金的取样及分析方法.第17部分:焊料及轴承用巴比合金中镉含量测定方法(光度测定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)
|
BS 3338-18-1966
| 锡及锡合金取样及分析方法.第18部分:焊料及轴承用白合金中铝含量测定方法(光度测定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of aluminium in solders and white metal bearing alloys (photometric method)
|
BS 3338-19-1966
| 锡及锡合金的取样及分析方法.白金属轴承合金和钎料中锌的测定方法(光度测定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of zinc in solders and white metal bearing alloys (photometric method)
|
BS 3338-1966
| 锡及锡合金的取样及分析方法.第19部分:焊料及白合金轴承中锌的测定方法(光度测定法)
| Methods for the sampling and analysis of tin and tin alloys. Method for the determination of zinc in solders and white metal bearing alloys (photometric method)
|
BS 3338-8-1961
| 锡及锡合金取样及分析方法.第8部分:锡锭、锡铅焊料及轴承用巴比合金中铋含量测定方法(光度测定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
|
BS 3338-9-1965
| 锡及锡合金取样及分析方法.第9部分:锡锭、焊料及轴承用巴比合金中砷含量测定方法(光度测定法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method)
|
BS 3469-1985
| 仪器用精密滚子轴承(球轴承)规范
| Specification for instrument precision rolling bearings (ball bearings)
|
BS 3SP 89-1983
| 飞机机体轴承特性、界面尺寸、容差及静载荷等级规范
| Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings
|
BS 4480-1-1992
| 滑动轴承:米制系列.第1部分:烧结轴衬尺寸和公差
| Plain bearings: metric series - Sintered bushes - Dimensions and tolerances
|
BS 4480-2-1974
| 滑动轴承规范.米制系列.第2部分:整体塑料轴套
| Specification for plain bearings: metric series - Solid plastics bushes
|
BS 4480-3-1993
| 滑动轴承.米制系列.第3部分:铜合金套管
| Plain bearings: metric series - Copper alloy bushes
|
BS 4480-4-1979
| 滑动轴承规范.米制系列.第4部分:卷制轴套尺寸、公差及检验方法
| Specification for plain bearings: metric series - Dimensions, tolerances and methods of checking wrapped bushes
|
BS 4480-5-1979
| 滑动轴承规范.米制系列.第5部分:薄壁半轴承的尺寸、公差及检验方法
| Plain bearings: metric series - Dimensions, tolerances and methods of checking thin-walled half bearings
|
BS 4480-6-1984
| 滑动轴承规范.米制系列.第6部分:带材制环形止推垫圈尺寸公差规范
| Plain bearings: metric series - Specification for dimensions and tolerances of ring type thrust washers made from strip
|
BS 4480-7-1984
| 滑动轴承规范.米制系列.第7部分:压制双金属半止推垫圈的尺寸和公差规范
| Plain bearings: metric series - Specification for dimensions and tolerances of pressed bimetallic half thrust washers
|
BS 4480-8-1984
| 滑动轴承规范.米制系列.第8部分:薄壁法兰联接半轴承的尺寸、公差及检验方法
| Plain bearings: metric series - Specification for dimensions, tolerances and methods of checking of thin-walled flanged half bearings
|
BS 4480-9-1995
| 滑动轴承:第9部分:米制系列.衬套外径测量
| Plain bearings: metric series - Checking the outside diameter of wrapped bushes
|
BS 5512-1991
| 滚动轴承动态载荷额定值和额定寿命的计算方法
| Method of calculating dynamic load ratings and rating life of rolling bearings
|
BS 5812-1-1979
| 滑动轴承材料.第1部分:整体轴承用铝合金规范
| Materials for plain bearings - Specification for aluminium alloy for solid bearings
|
BS 6010-3-1994
| 滚动轴承.第3部分:外球面加宽内圈轴承.第3部分:浇铸和压制轴承壳体尺寸规范
| Rolling bearings - Bearings with speherical outside surface and extended inner ring width - Specification for dimensions of cast and pressed housings
|
BS 6107-3-1992
| 滚动轴承.公差.第3部分:径向内部间隙规范
| Rolling bearings: tolerances - Specifications for radial internal clearance
|
BS 6413-2-1983
| 润滑剂、工业用油和相关产品(L级).第2部分:F系列的分类(主轴轴承、轴承和相关离合器)
| Lubricants, industrial oils and related products (class L) - Classification for family F (spindle bearings, bearings and associated clutches)
|
BS 7568-19-1992
| 冲压工具.导衬.B形的普通球轴承隔离环衬.1型
| Press tools - Guide bushes - Form B, ball cage bushes, plain, type 1
|
BS 7585-1-1992
| 多层金属滑动轴承.第1部分:粘合力无损超声波试验方法
| Metallic multilayer plain bearings - Method for non-destructive ultrasonic testing of bond
|
BS 7585-2-1992
| 多层金属滑动轴承.第2部分:厚度为2mm的轴承金属层粘合力的破坏性试验方法
| Metallic multilayer plain bearings - Method for destructive testing of bond for bearing metal layer thickness 2 mm
|
BS 7585-3-1992
| 多层金属滑动轴承.第3部分:模渗透无损试验方法
| Metallic multilayer plain bearings - Method for non-destructive die penetrant testing
|
BS 7637-1993
| 线性运动、循环球、套管型滚动轴承规范(公制系列)
| Specification for linear motion, recirculating ball, sleeve type rolling bearings (metric series)
|
BS 7675-1993
| 滑动轴承.薄壁半轴承.周长检验
| Plain bearings - Thin-walled half bearings - Checking of peripheral length
|
BS 7679-1993
| 普通轴承.几何特性及材料质量特性的质量控制技术和检验
| Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics
|
BS 7762-1994
| 滑动轴承.质量特性.统计过程控制(SPC)
| Plain bearings - Quality characteristics - Statistical process control (SPC)
|
BS 7772-1994
| 滑动轴承.薄壁半轴承和薄壁衬套的壁厚测量
| Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
|
BS 7823-1-1995
| 托架滑动轴承.轴承座部件规范
| Pedestal plain bearings - Specification for pillow blocks
|
BS 7823-2-1995
| 托架滑动轴承.侧边法兰轴承规范
| Pedestal plain bearings - Specification for side flange bearings
|
BS 7823-3-1995
| 托架滑动轴承.中心法兰轴承规范
| Pedestal plain bearings - Specification for centre flange bearings
|
BS EN 12080-1998
| 铁路设施.车箱体.滚动轴承
| Railway applications - Axleboxes - Rolling bearings
|
BS EN 1337-10-2003
| 结构轴承.检验和维护
| Structural bearings - Inspection and maintenance
|
BS EN 1337-11-1998
| 结构轴承.运输,储存和安装
| Structural bearings - Transport, storage and installation
|
BS EN 1337-4-2004
| 结构轴承.滚柱轴承
| Structural bearings - Roller bearings
|
BS EN 1337-6-2004
| 结构轴承.摇杆轴承
| Structural bearings - Rocker bearings
|
BS EN 1337-9-1998
| 结构轴承.防护
| Structural bearings - Protection
|
BS EN 2009-1992
| 轴承.钢的8号和9号直径系列机体刚性单列球轴承、尺寸和负荷
| Bearings - Airframe rolling rigid, single row ball bearings in steel diameter series 8 and 9. Dimensions and loads
|
BS EN 2011-1989
| 轴承规范.耐蚀钢的8号和9号直径系列机体刚性单列球轴承.尺寸和负荷
| Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9. Dimensions and loads
|
BS EN 2012-1989
| 轴承规范.钢的0号和2号直径系列机体刚性单列球轴承.尺寸和负荷
| Specification for bearings - airframe rolling rigid, single row ball bearings in steel diameter series 0 and 2. Dimensions and loads
|
BS EN 2014-1989
| 轴承规范.耐蚀钢的0号和2号直径系列机体刚性单列球轴承.尺寸和负荷
| Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 0 and 2. Dimensions and loads
|
BS EN 2015-1989
| 轴承规范.钢的2号直径系列机体双列自调心球轴承.尺寸和负荷
| Specification for bearings - airframe rolling double row, self aligning ball bearings in steel diameter series 2. Dimensions and loads
|
BS EN 2017-1989
| 轴承规范.耐蚀钢的2号直径系列机体双列自调心球轴承.尺寸和负荷
| Specification for bearings - airframe rolling double row self aligning ball bearings in corrosion resisting steel diameter series 2. Dimensions and loads
|
BS EN 2018-1989
| 轴承规范.钢的3号和4号直径系列机体单列自调心滚子轴承.尺寸和负荷
| Specification for bearings - airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4. Dimensions and loads
|
BS EN 2020-1989
| 轴承规范.耐蚀钢3号和4号直径系列的机体单列自调心滚子轴承.尺寸和负荷
| Specification for bearings - airframe rolling single row self aligning roller bearings in corrosion resisting steel diameter series 3 and 4. Dimensions and loads
|
BS EN 2022-1990
| 带自润滑内衬的耐蚀钢的普通球面轴承规范.轻型系列.尺寸和负荷
| Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads
|
BS EN 2023-1989
| 轴承规范.带自润滑内衬的耐蚀钢普通球面轴承.标准系列.尺寸和负荷
| Specification for bearings - spherical plain in corrosion resisting steel with self-lubricating liner - Normal series - Dimensions and loads
|
BS EN 2063-1992
| 飞行器机体滚动轴承.技术规范
| Airframe rolling bearings - Technical specification
|
BS EN 2064-1992
| 自润滑轴套耐蚀钢球面滑动轴承.技术规范
| Bearings, spherical plain in corrosion resisting steel with self lubricating liner - Technical specification
|
BS EN 2067-1996
| 带自调心球轴承的杆端头.技术规范
| Rod ends with self-aligning ball bearings - Technical specification
|
BS EN 2068-1996
| 带自润滑自调心轴承的杆端头.技术规范
| Rod ends with self-lubricating self-aligning bearings - Technical specification
|
BS EN 2079-1995
| 仪器和设备用的耐蚀钢的带法兰的精密球形轴承.尺寸和负荷
| Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads
|
BS EN 2130-2001
| 航空航天系列.仪器和设备用耐蚀钢制轴承和精密滚珠.技术规范
| Aerospace Series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification
|
BS EN 2335-1990
| 无装配槽的耐蚀钢普通球面轴承规范.尺寸和载荷
| Specification for bearings-spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads
|
BS EN 2356-1989
| 耐蚀钢滚动轴承用操纵钢索的带螺纹叉形端头规范.尺寸和负荷
| Specification for fork-ends threaded, control cable for rolling bearings in corrosion resisting steel - Dimensions and loads
|
BS EN 2360-1989
| 操纵钢索的旋锻耐蚀钢滚动轴承的叉形端头规范.尺寸和负荷
| Specification for fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable - Dimensions and loads
|
BS EN 2498-1990
| 带自润滑内衬和螺纹柄的可调节的自调心普通轴承的杆形端头规范.尺寸和规范
| Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank - Dimensions and loads
|
BS EN 2501-1992
| 轴承.带自润滑内衬和宽内环的耐蚀钢普通球面轴承.尺寸和负荷
| Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads
|
BS EN 2584-2001
| 航空航天系列.具有自润滑轴套的球面耐蚀钢轴承.窄系列.环境温度下的高负荷.尺寸和负荷
| Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
|
BS EN 2585-2001
| 航空航天系列.具有自润滑轴套的球面耐蚀钢轴承.宽系列.环境温度下的高负荷.负荷和尺寸
| Aerospace series - Bearings, spherical plain in corrosion-resisting steel with self-lubricating liner - Elevated load at ambient temperature - Dimensions and loads
|
BS EN 2790-1991
| 带自润滑套和啮合量为1.5的螺纹轴的可动调自定位滚动轴承杆端.尺寸和负载
| Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread - Dimensions and loads
|
BS EN 3045-1994
| 机体轴承.钢制的刚性单列滚珠轴承.0号和2号直径系列.小游隙类.尺寸和负荷
| Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads
|
BS EN 3046-1994
| 机体轴承.镀镉钢的刚性单列滚珠轴承.0号和2号直径系列.小游隙类.尺寸和负荷
| Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads
|
BS EN 3047-1994
| 机体轴承.耐腐蚀钢的刚性单列球轴承.0号和2号直径系列.小游隙类.尺寸和负荷
| Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads
|
BS EN 3048-2001
| 有自润滑轴套的防腐钢球面轴承.轻型系列.环境温度下的高负荷.尺寸和负荷
| Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads
|
BS EN 3053-1994
| 机体轴承.钢制的单列自调心滚子轴承.尺寸和负载
| Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Dimensions and loads
|
BS EN 3054-1994
| 机体轴承.镀铬的钢制的单列自调心滚子轴承.尺寸和负载
| Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Dimensions and loads
|
BS EN 3055-1994
| 机体轴承.耐蚀钢的单列自调心滚子轴承.尺寸和负荷
| Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Dimensions and loads
|
BS EN 3056-1994
| 机体轴承.钢制的刚性双列球轴承.尺寸和负荷
| Bearings, airframe rolling - Rigid double row ball bearings in steel - Dimensions and loads
|
BS EN 3057-1994
| 机体轴承.镀铬的钢制的刚性双列球轴承.尺寸和负载
| Bearings, airframe rolling - Rigid double row ball bearings in steel, cadmium plated - Dimensions and loads
|
BS EN 3058-1994
| 机体轴承..耐蚀钢的刚性双列球轴承.尺寸和负载
| Bearings, airframe rolling - Rigid double row ball bearings in corrosion resisting steel - Dimensions and loads
|
BS EN 3280-1994
| 刚性或自调心的机体轴承.技术规范
| Bearings, airframe rolling, rigid or self-aligning - Technical specification
|
BS EN 3281-1994
| 机体轴承.钢制的刚性单列球轴承.8号和9号直径系列.尺寸和负荷
| Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9. Dimensions and loads
|
BS EN 3282-1994
| 机体轴承.钢制的镀镉刚性单列球轴承.8号和9号直径系列.尺寸和负荷
| Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9. Dimensions and loads
|
BS EN 3283-1994
| 机体轴承.耐蚀钢的刚性排列球轴.8号和9号直径系列.尺寸和负荷
| Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9. Dimensions and loads
|
BS EN 3284-1994
| 机体轴承.钢制的刚性单列球轴承.0号和2号直径系列.标准游隙类.尺寸和负荷
| Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2. Normal clearance category - Dimensions and loads
|
BS EN 3285-1994
| 机体轴承.钢制的镀镉刚性单列球轴承.0号和2号直径系列.标准游隙类.尺寸和负荷
| Bearings; airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2. Normal clearance category - Dimensions and loads
|
BS EN 3286-1994
| 机体轴承.耐蚀钢的刚性单列球轴承.0号和2号直径系列.标准游隙类.尺寸和负荷
| Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2. Normal clearance category - Dimensions and loads
|
BS EN 3287-1994
| 机体轴承.钢制的双列自调心球轴承.2号直径系列.尺寸和负荷
| Bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2. Dimensions and loads
|
BS EN 3288-1994
| 机体轴承.钢制的镀镉双列自调心球轴承.2号直径系列.尺寸和负荷
| Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2. Dimensions and loads
|
BS EN 3289-1994
| 机体轴承.耐蚀钢的自调心双列球轴承.2号直径系列.尺寸和负荷
| Bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2. Dimensions and loads
|
BS EN 3290-1994
| 机体轴承.钢制的单列自调心滚子轴承.3号和4号直径系列.尺寸和负荷
| Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4. Dimensions and loads
|
BS EN 3291-1994
| 机体轴承.钢制的镀镉单列自调心滚子轴承.3号和4号直径系列.尺寸和负荷
| Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4. Dimensions and loads
|
BS EN 3292-1994
| 机体轴承.耐蚀钢的单列自调心滚子轴承.3号和4号直径系列.尺寸和负荷
| Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4. Dimensions and loads
|
BS EN 3446-1995
| 仪器和设备用的耐蚀钢的不带法兰的精密球轴承.尺寸和负荷
| Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads
|
BS EN 3541-1992
| 带螺柄的端杆、可调、自对准球轴承.尺寸、扭矩、间隙和载荷
| Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads
|
BS EN 4035-2006
| 航空航天系列.减小内部径向间隙和带螺纹钛合金杆耐腐蚀钢可调自动对心双列球轴承的杆端.尺寸和载荷
| Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads
|
BS EN 4040-2006
| 航空航天.宽内环的带自润滑内衬的耐蚀钢制关节轴承.室温高负荷.尺寸和负荷
| Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads |
BS EN 715-1995
| 热塑管道系统.小直径压力管和配件间端部负荷轴承接头.在包含端推力的内部水压下密封性的试验方法
| Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust
|
BS EN ISO 683-17-1999
| 热处理钢、合金钢和易切削钢.滚珠轴承和滚柱轴承钢
| Heat-treated steels, alloy steels and free-cutting steels - Ball and roller bearing steels
|
BS EN ISO 8826-1-1995
| 技术制图.滚柱轴承.通用简化画法
| Technical drawings - Roller bearings - General simplified representation
|
BS EN ISO 8826-2-1997
| 技术制图.滚子轴承.详细简化画法
| Technical drawings - Roller bearings - Detailed simplified representation
|
BS ISO 104-2002
| 滚动轴承.止推轴承. 外形尺寸.总体计划
| Rolling bearings - Thrust bearings - Boundary dimensions, general plan
|
BS ISO 10766-2006
| 液压动力.汽缸.活塞及连杆用矩形截面轴承环沟槽尺寸
| Hydraulic fluid power - Cylinders - Housing dimensions forrectangular-sect bearing rings for pistons and rods
|
BS ISO 10792-1-1996
| 航空和航天.带自润滑衬瓦的耐腐蚀钢机体球面滑动轴承.公制系列
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Metric series
|
BS ISO 10792-2-1996
| 航空和航天.带自润滑衬瓦的耐腐蚀钢机体球面滑动轴承.英制系列
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Inch series
|
BS ISO 10792-3-1996
| 航空和航天.带自润滑衬瓦的耐腐蚀钢机体球面滑动轴承.技术规范
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Technical specification
|
BS ISO 113-1999
| 滚动轴承.轴承座.外形尺寸
| Rolling bearings - Plummer block housings - Boundary dimensions
|
BS ISO 1132-1-2000
| 滚动轴承.公差.术语和定义
| Rolling bearings - Tolerances - Terms and definitions
|
BS ISO 1132-2-2002
| 滚动轴承.公差.测量和校验原理和方法
| Rolling bearings - Tolerances - Measuring and gauging principles and methods
|
BS ISO 12043-1995
| 滚动轴承.单列圆柱形滚子轴承.活动肋和无肋侧面倒角尺寸
| Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides
|
BS ISO 12044-1995
| 滚动轴承.单列角面接触的滚珠轴承.外圈无止推侧面倒角尺寸
| Rolling bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side
|
BS ISO 1206-2002
| 滚动轴承.尺寸系列为48,49和69的滚针轴承.边界尺寸和公差
| Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances
|
BS ISO 12128-2002
| 滑动轴承.润滑油孔、油槽和油穴.尺寸、类型、标记及其对轴套的应用
| Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes
|
BS ISO 12129-2-1995
| 滑动轴承.轴、法兰和止推安装环形状、位置和表面粗糙度公差
| Plain bearings - Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
|
BS ISO 12132-2000
| 滑动轴承.薄壁轴瓦质量保证.FMEA设计
| Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA
|
BS ISO 12240-1-1998
| 球形滑动轴承.径向球形滑动轴承
| Spherical plain bearings - Radial spherical plain bearings
|
BS ISO 12240-2-1998
| 球形滑动轴承.角面接触径向球形滑动轴承
| Spherical plain bearings - Angular contact radial spherical plain bearings
|
BS ISO 12240-3-1998
| 球形滑动轴承.止推球形滑动轴承
| Spherical plain bearings - Thrust spherical plain bearings
|
BS ISO 12240-4-1998
| 球形滑动轴承.球形滑动轴承杆端
| Spherical plain bearings - Spherical plain bearing rod ends
|
BS ISO 12303-1995
| 滑动轴承.质量特性.机器和加工性能的计算
| Plain bearings - Quality characteristics - Calculation of machine and process capabilities
|
BS ISO 12307-2-2000
| 滑动轴承.卷制轴套检验.内径的检验
| Plain bearings - Checking of wrapped bushes - Checking the inside diameter
|
BS ISO 13012-1998
| 套筒型循环球体直线运动滚动轴承.附件
| Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories
|
BS ISO 13778-1999
| 滑动轴承.薄壁轴瓦的质量保证.小间隙范围轴承的选配
| Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range
|
BS ISO 14728-1-2004
| 滚动轴承.线性运动滚动轴承.动态荷载额定值和额定寿命
| Rolling bearings - Linear motion rolling bearings - Dynamic load ratings and rating life
|
BS ISO 14728-2-2004
| 滚动轴承.线性运动滚动轴承.静态荷载额定值
| Rolling bearings - Linear motion rolling bearings - Static load ratings
|
BS ISO 14839-1-2002
| 机械振动.装有主动磁性轴承的旋转机械装置的振动.词汇
| Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Vocabulary
|
BS ISO 14839-2-2004
| 机械振动.装有主动磁性轴承的旋转机械的振动.振动评价
| Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Evaluation of vibration
|
BS ISO 15-1998
| 滚动轴承.径向轴承.边界尺寸、一般计划
| Rolling bearings - Radial bearings - Boundary dimensions, general plan
|
BS ISO 15241-2002
| 滚动轴承.量值符号
| Rolling bearings - Symbols for quantities
|
BS ISO 15242-1-2004
| 滚动轴承.振动测量方法.基本原则
| Rolling bearings - Measuring methods for vibration - Fundamentals
|
BS ISO 15242-2-2005
| 滚动轴承.振动测量方法.带圆柱芯和外表面的径向滚珠轴承
| Rolling bearings - Measuring methods for vibration - Radial ball bearings with cylindrical bore and outside surface
|
BS ISO 15242-3-2006
| 滚动轴承.振动测量方法.带圆孔和外表面的向心球面和圆锥滚子轴承
| Rolling bearings - Measuring methods for vibration - Radial spherical and tapered roller bearings with cylindrical bore and outside surface
|
BS ISO 15243-2004
| 滚动轴承.损害和故障.术语、特性和成因
| Rolling bearings - Damage and failures - Terms, characteristics and causes
|
BS ISO 15312-2004
| 滚动轴承.热速额定值.计算和系数
| Rolling bearings - Thermal speed rating - Calculation and coefficients
|
BS ISO 16287-2005
| 滑动轴承.热塑性轴衬.尺寸和公差
| Plain bearings - Thermoplastic bushes - Dimensions and tolerances
|
BS ISO 199-2006
| 滚动轴承.止推轴承.公差
| Rolling bearings - Thrust bearings - Tolerances
|
BS ISO 21107-2004
| 滚动轴承和球面滑动轴承.电子介质用查寻结构.用属性词汇标识的特性和性能标准
| Rolling bearings and spherical plain bearings - Search structure for electronic media - Characteristics and performance criteria identified by attribute vocabulary
|
BS ISO 246-1995
| 滚动轴承.滚柱轴承、分离式止推环.界面尺寸
| Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions
|
BS ISO 2982-1-1996
| 滚动轴承.附件.锥形套筒.尺寸
| Rolling bearings - Accessories - Tapered sleeves - Dimensions
|
BS ISO 2982-2-2001
| 滚动轴承.附件.防松螺母和锁紧装置.尺寸
| Rolling bearings - Accessories - Locknuts and locking devices - Dimensions
|
BS ISO 3030-1997
| 滚动轴承.径向针形滚筒和柜式组件.尺寸和公差
| Rolling bearings - Radial needle roller and cage assemblies - Dimensions and tolerances
|
BS ISO 3031-2000
| 滚动轴承.止推滚针、保持架组件和止推垫圈.外形尺寸和公差
| Rolling bearings - Thrust needle roller and cage assemblies, thrust washers - Boundary dimensions and tolerances
|
BS ISO 3096-1997
| 滚动轴承.针形滚筒.尺寸和公差
| Rolling bearings - Needle rollers - Dimensions and tolerances
|
BS ISO 3245-1997
| 滚动轴承.拉制的杯形无内环滚针轴承.外形尺寸和公差
| Rolling bearings - Needle roller bearings, drawn cup without inner rings - Boundary dimensions and tolerances
|
BS ISO 3290-2002
| 滚动轴承.球轴承.尺寸和公差
| Rolling bearings - Balls - Dimensions and tolerances
|
BS ISO 3547-1-2000
| 滑动轴承.卷制轴套.尺寸
| Plain bearings - Wrapped bushes - Dimensions
|
BS ISO 3547-2-2000
| 滑动轴承.卷制轴套.外径和内径试验数据
| Plain bearings - Wrapped bushes - Test data for outside and inside diameter
|
BS ISO 3547-3-2000
| 滑动轴承.卷制轴套.润滑油孔、油槽和油穴
| Plain bearings - Wrapped bushes - Lubrication holes, lubrication grooves and lubrication indentations
|
BS ISO 3547-4-2000
| 滑动轴承.卷制轴套.材料
| Plain bearings - Wrapped bushes - Materials
|
BS ISO 3548-2000
| 滑动轴承.带或不带法兰的薄壁轴瓦.公差、设计特点和试验方法
| Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
|
BS ISO 4381-2000
| 普通轴承.多层普通轴承用铅锡铸造合金
| Plain bearings - Lead and tin casting alloys for multilayer plain bearings
|
BS ISO 4383-2000
| 普通轴承.薄壁普通轴承用多层材料
| Plain bearings - Multilayer materials for thin-walled plain bearings
|
BS ISO 4384-1-2000
| 普通轴承.轴承合金的硬度试验.复合材料
| Plain bearings - Hardness testing of bearing metals - Compound materials
|
BS ISO 464-1995
| 滚动轴承.定位固定环的径向轴承.尺寸和公差
| Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances
|
BS ISO 492-2002
| 滚动轴承.径向轴承.公差
| Rolling bearings - Radial bearings - Tolerances
|
BS ISO 5593-1998
| 滚动轴承.词汇
| Rolling bearings - Vocabulary
|
BS ISO 582-1995
| 滚动轴承.倒角尺寸.最大值
| Rolling bearings - Chamfer dimensions - Maximum values
|
BS ISO 6811-1998
| 球形滑动轴承.词汇
| Spherical plain bearings - Vocabulary
|
BS ISO 7063-2004
| 滚动轴承.滚针轴承滚道滚针.边界尺寸和公差
| Rolling bearings - Needle roller bearing track rollers - Boundary dimensions and tolerances
|
BS ISO 7148-1-2000
| 滑动轴承.轴承材料摩擦特性试验.轴承金属试验
| Plain bearings - Testing of tribological behaviour of bearing materials - Testing of bearing metals
|
BS ISO 7148-2-2000
| 滑动轴承.轴承材料摩擦特性试验.聚合物基体轴承材料试验
| Plain bearings - Testing of tribological behaviour of bearing materials - Testing of polymer-based bearing materials
|
BS ISO 8443-1999
| 滚动轴承.凸缘外圈向心珠轴承.凸缘尺寸
| Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions
|
BS ISO 9758-2001
| 航空器操纵钢丝绳用滚动轴承的螺纹式钢制叉形端.尺寸及载荷
| Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads
|
BS ISO 9760-2001
| 航空航天.航空器滚动轴承操纵钢丝绳上的锻制耐腐蚀钢制叉形端.尺寸及载荷
| Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads
|
BS ISO/TS 16799-2000
| 滚动轴承.动力负荷额定值和额定寿命.基本动力负荷额定值计算中的不连续性
| Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings
|
KIT 162-2005
| 结构轴承汇编
| Structural bearings kit
|
编号 | 中文名称 | 英文名称 |