编号 | 中文名称 | 英文名称 |
ISO 1002-1983
| 滚动轴承 飞机机架轴承 特性、外形尺寸、公差、额定静载荷
| Rolling bearings; Airframe bearings; Characteristics, boundary dimensions, tolerances, static load ratings
|
ISO 10129-2006
| 滑动轴承.轴承金属的试验.静态条件下润滑油的耐腐蚀性
| Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions
|
ISO 10285-1992
| 套筒型循环球直线运动球轴承 米制
| Rolling bearings, linear motion, recirculating ball, sleeve type; metric series
|
ISO 10317-1992
| 滚动轴承 公制圆锥滚子轴承 代号系统
| Rolling bearings; metric tapered roller bearings; designation system
|
ISO 104-2002
| 滚动轴承.止推轴承. 外形尺寸.总体设计图
| Rolling bearings - Thrust bearings - Boundary dimensions, general plan
|
ISO 10792-1-1995
| 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第1部分:米制系列
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 1: Metric series
|
ISO 10792-2-1995
| 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第2部分:英制系列
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series
|
ISO 10792-3-1995
| 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第3部分:技术规范
| Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification
|
ISO 113-1999
| 滚动轴承 轴承座 外形尺寸
| Rolling bearings - Plummer block housings - Boundary dimensions
|
ISO 1132-1-2000
| 滚动轴承 公差 第1部分:术语和定义 三种语言版
| Rolling bearings - Tolerances - Part 1: Terms and definitions
|
ISO 1132-2-2001
| 滚动轴承 公差 第2部分:测量和规量原则和方法
| Rolling bearings - Tolerances - Part 2: Measuring and gauging principles and methods
|
ISO 11687-1-1995
| 滑动轴承 滑动轴承座 第1部分:支撑式
| Plain bearings - Pedestal plain bearings - Part 1: Pillow blocks
|
ISO 11687-2-1995
| 滑动轴承 滑动轴承座 第2部分:单边法兰式
| Plain bearings - Pedestal plain bearings - Part 2: Side flange bearings
|
ISO 11687-3-1995
| 滑动轴承 滑动轴承座 第3部分:中心法兰式
| Plain bearings - Pedestal plain bearings - Part 3: Centre flange bearings
|
ISO 12043-1995
| 滚动轴承 单列圆柱滚子轴承 平挡圈及套圈无档边端倒角尺寸
| Roller bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides
|
ISO 12044-1995
| 滚动轴承 单列角接触球轴承 外圈非推力端倒角尺寸
| Roller bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side
|
ISO 1206-2001
| 滚动轴承 滚针轴承,尺寸48、49和69系列 限制尺寸和误差
| Rolling bearings - Needle roller bearings, dimension series 48, 49 und 69 - Boundary dimensions and tolerances
|
ISO 12128-2001
| 滑动轴承 润滑油孔、油槽和油穴 尺寸、类型、标记及其应用
| Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes
|
ISO 12129-1-1995
| 滑动轴承 第1部分:配合
| Plain bearings - Part 1: Fits
|
ISO 12129-2-1995
| 滑动轴承 第2部分:轴、法兰和止推环的形位公差和表面粗糙度
| Plain bearings - Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
|
ISO 12130-1-2001
| 滑动轴承 静态条件下液压斜垫止推滑动轴承 第1部分:斜垫止推轴承的计算
| Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings
|
ISO 12130-2-2001
| 滑动轴承 静态条件下液压斜垫止推滑动轴承 第2部分:斜垫止推轴承的功能
| Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings
|
ISO 12130-3-2001
| 滑动轴承 静态条件下液压斜垫止推滑动轴承 第3部分:斜垫止推轴承计算用指导值
| Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 3: Guide values for the calculation of tilting pad thrust bearings
|
ISO 12131-1-2001
| 滑动轴承 稳态条件下液体动压滑动止推垫轴承 第1部分:止推垫轴承的计算
| Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 1: Calculation of thrust pad bearings
|
ISO 12131-2-2001
| 滑动轴承 稳态条件下液体动压滑动止推垫轴承 第2部分:止推垫轴承的计算功能
| Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 2: Functions for the calculation of thrust pad bearings
|
ISO 12131-3-2001
| 滑动轴承 稳态条件下液体动压滑动止推垫轴承 第3部分:止推垫轴承的计算指导值
| Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 3: Guide values for the calculation of thrust pad bearings
|
ISO 12132-1999
| 滑动轴承 薄壁轴瓦的质量保证 设计中的失效形式和影响分析(FMEA)
| Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA
|
ISO 12167-1-2001
| 滑动轴承 静态条件下带有排泄槽的液压滑动轴颈轴承 第1部分:带有排泄槽的润滑油滑动轴颈轴承的计算
| Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
|
ISO 12167-2-2001
| 滑动轴承 静态条件下带有排泄槽的液压滑动轴颈轴承 第2部分:带有排泄槽的润滑油滑动轴颈轴承的计算用特
| Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
|
ISO 12168-1-2001
| 滑动轴承 静态条件下不带排泄槽的液压滑动轴颈轴承 第1部分:不带排泄槽的润滑油滑动轴颈轴承的计算
| Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
|
ISO 12168-2-2001
| 滑动轴承 静态条件下不带排泄槽的液压滑动轴颈轴承 第1部分:不带排泄槽的润滑油滑动轴颈轴承的计算用特
| Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves
|
ISO 1224-1984
| 滚动轴承 仪器精密轴承
| Rolling bearings; Instrument precision bearings
|
ISO 12240-1-1998
| 关节轴承 第1部分:径向球面滑动轴承
| Spherical plain bearings - Part 1: Radial spherical plain bearings
|
ISO 12240-2-1998
| 关节轴承 第2部分:向心角接触球面滑动轴承
| Spherical plain bearings - Part 2: Angular contact radial spherical plain bearings
|
ISO 12240-3-1998
| 关节轴承 第3部分:推力球面滑动轴承
| Spherical plain bearings - Part 3: Thrust spherical plain bearings
|
ISO 12240-4 Technical Corrigendum 1-1999
| 关节轴承 第4部分:杆端球面滑动轴承 技术勘误1
| Spherical plain bearings - Part 4: Spherical plain bearing rod ends; Technical Corrigendum 1
|
ISO 12240-4-1998
| 关节轴承 第4部分:杆端球面滑动轴承
| Spherical plain bearings - Part 4: Spherical plain bearing rod ends
|
ISO 12301 Technical Corrigendum 1-1995
| 滑动轴承 几何特性和材料质量特性的质量控制技术和检验 技术勘误表1
| Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics; Technical Corrigendum 1
|
ISO 12301-1992
| 滑动轴承 几何特性和材料质量特性的质量控制技术和检验
| Plain bearings; quality control techniques and inspection of geometrical and material quality characteristics
|
ISO 12302-1993
| 滑动轴承 质量特定 统计过程控制
| Plain bearings; quality characteristics; statistical process control (SPC)
|
ISO 12303-1995
| 滑动轴承 质量特性 机器和加工能力的计算
| Plain bearings - Quality characteristics - Calculation of machine and process capabilities
|
ISO 12306-1994
| 滑动轴承 薄壁轴瓦和薄壁轴套的壁厚测量
| Plain bearings; measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
|
ISO 12307-1-1994
| 滑动轴承 卷制轴套 第1部分:外径的检验
| Plain bearings - Wrapped bushes - Part 1: Checking the outside diameter
|
ISO 12307-2-2000
| 滑动轴承 卷制轴套检验 第2部分:内径的检验
| Plain bearings - Checking of wrapped bushes - Part 2: Checking the inside diameter
|
ISO 12308-1994
| 滑动轴承 质量保证 抽样形式 定义、应用和检验
| Plain bearings; quality assurance; sample types; definitions, applications and testing
|
ISO 13012 Technical Corrigendum 1-1999
| 套筒型循环球直线运动球轴承 附件 技术勘误1
| Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories; Technical corrigendum 1
|
ISO 13012-1998
| 套筒型循环球直线运动球轴承 附件
| Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories
|
ISO 13411-1997
| 航空航天 飞机结构用滚针、滚柱和滚道式滚子轴承 技术规范
| Aerospace - Airframe needle roller, cylindrical roller and track roller bearings - Technical specification
|
ISO 13414-1997
| 航空航天 飞机结构用带档边的单列滚针轴承 英制系列
| Aerospace - Airframe needle roller bearings, single-row, shielded - Inch series
|
ISO 13778-1999
| 滑动轴承 薄壁轴瓦的质量保证 选配法获得小间隙
| Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range
|
ISO 13846-2000
| 塑料管道系统 热塑性加压塑料管道用端部负载轴承和非端部负载轴承的安装和连接 在内水压下长期密封的试验方
| Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaklightness under internal water pressure
|
ISO 14190-1998
| 航空航天 飞机结构用滚动轴承:滚珠和球面滚子轴承 技术规范
| Aerospace - Airframe rolling bearings: Ball and spherical roller bearings - Technical specification
|
ISO 14191-1998
| 航空航天 飞机结构用直径系列3和4的单列自位球面滚子轴承 米制系列
| Aerospace - Airframe spherical roller bearings, single-row, self-aligning, diameter series 3 and 4 - Metric series
|
ISO 14192-1998
| 航空航天 飞机结构用单列自位中等负荷防尘球面滚子轴承 米制系列
| Aerospace - Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty - Metric series
|
ISO 14193-1998
| 航空航天 飞机结构用中等负荷扩展内圈单列自位密封球面滚子轴承 英制系列
| Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, extended inner ring, intermediate duty - Inch series
|
ISO 14194-1998
| 航空航天 飞机结构用重负荷扩展内圈自位双列密封球面滚子轴承 英制系列
| Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, extended inner ring, heavy duty - Inch series
|
ISO 14195-1998
| 航空航天 飞机结构用轻负荷扭力管设计的自位双列密封球面滚子轴承 英制系列
| Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, torque tube design, light duty - Inch series
|
ISO 14196-1998
| 航空航天 飞机结构用重负荷普通内圈自位双列密封球面滚子轴承 英制系列
| Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, plain inner ring, heavy duty - Inch series
|
ISO 14197-1998
| 航空航天 飞机结构用中等负荷自位单列密封球面滚子轴承 英制系列
| Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, intermediate duty - Inch series
|
ISO 14201-1998
| 航空航天 飞机结构用直径系列2的自位双列球轴承 米制系列
| Aerospace - Airframe ball bearings, double-row, self-aligning, diameter series 2 - Metric series
|
ISO 14202-1998
| 航空航天 飞机结构用直径系列0和2的单列刚性球轴承 米制系列
| Aerospace - Airframe ball bearings, single-row, rigid, diameter series 0 and 2 - Metric series
|
ISO 14203-1998
| 航空航天 飞机结构用直径系列8和9单列刚性球轴承 米制系列
| Aerospace - Airframe ball bearings, single-row, rigid, diameter series 8 and 9 - Metric series
|
ISO 14204-1998
| 航空航天 飞机结构用直径系列0的双列刚性球轴承 米制系列
| Aerospace - Airframe ball bearings, double-row, rigid, diameter series 0 - Metric series
|
ISO 14206-1998
| 航空航天 飞机结构用轻负荷单列刚性密封球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, sealed, light duty - Inch series
|
ISO 14207-1998
| 航空航天 飞机结构用轻负荷密封精密单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, light duty - Inch series
|
ISO 14208-1998
| 航空航天 飞机结构用中等负荷密封单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, sealed, intermediate duty - Inch series
|
ISO 14209-1998
| 航空航天 飞机结构用中等负荷密封精密单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty - Inch series
|
ISO 14210-1998
| 航空航天 飞机结构用扭力管设计的轻负荷密封单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty - Inch series
|
ISO 14211-1998
| 航空航天 飞机结构用轻负荷扭力管设计的单列刚性密封精密球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty - Inch series
|
ISO 14212-1998
| 航空航天 飞机结构用扭力管设计的超轻负荷密封单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty - Inch series
|
ISO 14213-1998
| 航空航天 飞机结构用扭力管设计的超轻负荷密封精密单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra light duty - Inch series
|
ISO 14214-1998
| 航空航天 飞机结构用重负荷密封双列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, double-row, rigid, sealed, heavy duty - Inch series
|
ISO 14215-1998
| 航空航天 飞机结构用重负荷密封精密双列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty - Inch series
|
ISO 14216-1998
| 航空航天 飞机结构用重负荷密封双列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, double-row, self-aligning, sealed, heavy duty - Inch series
|
ISO 14217-1998
| 航空航天 飞机结构用重负荷密封精密双列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty - Inch series
|
ISO 14218-1998
| 航空航天 飞机结构用重负荷密封单列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, heavy duty - Inch series
|
ISO 14219-1998
| 航空航天 飞机结构用重负荷密封精密单列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty - Inch series
|
ISO 14220-1998
| 航空航天 飞机结构用轻负荷密封单列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, light duty - Inch series
|
ISO 14221-1998
| 航空航天 飞机结构用轻负荷密封精密单列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty - Inch series
|
ISO 14728-1-2004
| 滚动轴承.线性运动滚动轴承.第1部分:动态负载额定值和额定寿命
| Rolling bearings - Linear motion rolling bearings - Part 1: Dynamic load ratings and rating life
|
ISO 14728-2-2004
| 滚动轴承.线性运动滚动轴承.第2部分:静态负载额定值
| Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings
|
ISO 14839-1-2002
| 机械振动.有主动磁性轴承的旋转机械装置.第1部分:词汇
| Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearing - Part 1: Vocabulary
|
ISO 14839-2-2004
| 机械振动.装配有主动磁性轴承的旋转机械装置的振动.第2部分:振动评价
| Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 2: Evaluation of vibration
|
ISO 15-1998
| 滚动轴承 向心轴承 外形尺寸总方案
| Rolling bearings - Radial bearings - Boundary dimensions, general plan
|
ISO 15241-2001
| 滚动轴承 量值符号
| Rolling bearings - Symbols for quantities
|
ISO 15242-1-2004
| 滚动轴承.振动测量方法.第1部分:基本原则
| Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals
|
ISO 15242-2-2004
| 滚动轴承.振动测量方法.第2部分:带圆柱芯和外表面的径向滚珠轴承
| Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface
|
ISO 15243-2004
| 滚动轴承.损伤和故障.术语、特性和成因
| Rolling bearings - Damage and failures - Terms, characteristics and causes
|
ISO 15312-2003
| 滚动轴承.热速率.计算和系数
| Rolling bearings - Thermal speed rating - Calculation and coefficients
|
ISO 16287-2005
| 滑动轴承.热塑性轴衬.尺寸和公差
| Plain bearings - Thermoplastic bushes - Dimensions and tolerances
|
ISO 199-2005
| 滚动轴承.止推轴承.公差
| Rolling bearings - Thrust bearings - Tolerances
|
ISO 21107-2004
| 滚动轴承和球面滑动轴承.电子介质用查寻结构.用属性词汇标识的特性和性能标准
| Rolling bearings and spherical plain bearings - Search structure for electronic media - Characteristics and performance criteria identified by attribute vocabulary
|
ISO 246-1995
| 滚动轴承 圆柱滚子轴承斜挡圈 外形尺寸
| Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions
|
ISO 2795-1991
| 滑动轴承 烧结轴套 尺寸和公差
| Plain bearings; sintered bushes; dimensions and tolerances
|
ISO 281 AMD 1-2000
| 滚动轴承 额定动载荷和额定寿命 修改1
| Rolling bearings - Dynamic load ratings and rating life; Amendment 1
|
ISO 281 AMD 2-2000
| 滚动轴承 额定动载荷和额定寿命 修改2:寿命修正系数axyz
| Rolling bearings - Dynamic load ratings and rating life; Amendment 2: Life modification factor a<(Index)xyz>
|
ISO 281-1990
| 滚动轴承 额定动载荷和额定寿命
| Rolling bearings; dynamic load ratings and rating life
|
ISO 2982-1-1995
| 滚动轴承 附件 第1部分:锥形衬套
| Rolling bearings - Accessories - Part 1: Tapered sleeves - Dimensions
|
ISO 2982-2-2001
| 滚动轴承 附件 第2部分:锁紧母和锁紧装置
| Rolling bearings - Accessories - Part 2: Locknuts and locking devices; Dimensions
|
ISO 3030-1996
| 滚动轴承 向心滚针和保持架组件 尺寸和公差
| Roller bearings - Radial needle roller and cage assemblies - Dimensions and tolerances
|
ISO 3031-2000
| 滚动轴承 推力滚针和保持架组件、推力垫圈 外形尺寸和公差
| Rolling bearings - Thrust needle roller and cage assemblies, thrust washers - Boundary dimensions and tolerances
|
ISO 3096 Technical Corrigendum 1-1999
| 滚动轴承 滚针 尺寸和公差 技术勘误1
| Rolling bearings - Needle rollers - Dimensions and tolerances; Technical Corrigendum 1
|
ISO 3096-1996
| 滚动轴承 滚针 尺寸和公差
| Rolling bearings - Needle rollers - Dimensions and tolerances
|
ISO 3228-1993
| 滚动轴承 外球面轴承铸造和冲压座
| Rolling bearings; cast and pressed housings for insert bearings
|
ISO 3245-1997
| 滚动轴承 无内圈、冲压外圈滚针轴承 外形尺寸和公差
| Rolling bearings - Needle roller bearings, drawn cup without inner rings - Boundary dimensions and tolerances
|
ISO 3290-2001
| 滚动轴承 球 尺寸和公差
| Rolling bearings - Balls - Dimensions and tolerances
|
ISO 3547-1-1999
| 滑动轴承 卷制轴套 第1部分:尺寸
| Plain bearings - Wrapped bushes - Part 1: Dimensions
|
ISO 3547-2-1999
| 滑动轴承 卷制轴套 第2部分:外径和内径试验数据
| Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameter
|
ISO 3547-3-1999
| 滑动轴承 卷制轴套 第3部分:润滑油孔、油槽和油穴
| Plain bearings - Wrapped bushes - Part 3: Lubrication holes, lubrication grooves and lubrication indentations
|
ISO 3547-4-1999
| 滑动轴承 卷制轴套 第4部分:材料
| Plain bearings - Wrapped bushes - Part 4: Materials
|
ISO 3548-1999
| 滑动轴承 带或不带法兰的薄壁轴瓦 公差、设计要素和试验方法
| Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
|
ISO 355 ADD 1-1980
| 滚动轴承 公制圆锥滚子轴承 外形尺寸和系列代号 补充1
| Rolling bearings; metric tapered roller bearings; boundary dimensions and series designations; addendum 1
|
ISO 355 ADD 2-1980
| 滚动轴承 公制圆锥滚子轴承 外形尺寸和系列代号 补充2
| Rolling bearings; metric tapered roller bearings; boundary dimensions and series designations; addendum 2
|
ISO 355-1977
| 滚动轴承 公制圆锥滚子轴承 外形尺寸和系列代号
| Rolling bearings; Metric tapered roller bearings; Boundary dimensions and series designations
|
ISO 4378-1-1997
| 滑动轴承 术语、定义和分类 第1部分:设计、轴承材料及其性能 三种语言版
| Plain bearings - Terms, definitions and classification - Part 1: Design, bearing materials and their properties
|
ISO 4378-2-1983
| 滑动轴承 术语、定义和分类 第2部分:摩擦和磨损 三种语言版
| Plain bearings; Terms, definitions and classification; Part 2 : Friction and wear Trilingual edition
|
ISO 4378-3-1983
| 滑动轴承 术语、定义和分类 第3部分:润滑 三种语言版
| Plain bearings; Terms, definitions and classification; Part 3 : Lubrication Trilingual edition
|
ISO 4378-4-1997
| 滑动轴承 术语、定义和分类 第4部分:计算参数及其符号 三种语言版
| Plain bearings - Terms, definitions and classification - Part 4: Calculation parameters and their symbol
|
ISO 4379-1993
| 滑动轴承.铜合金衬套
| Plain bearings; copper alloy bushes
|
ISO 4381-2000
| 滑动轴承 多层滑动轴承用铅锡铸造合金
| Plain bearings - Lead and tin casting alloys for multilayer plain bearings
|
ISO 4382-1-1991
| 滑动轴承 铜合金 第1部分:单层和多层厚壁滑动轴承用铸造合金
| Plain bearings; copper alloys; part 1: cast copper alloys for solid and multilayer thick-walled plain bearings
|
ISO 4382-2-1991
| 滑动轴承 铜合金 第2部分:单层滑动轴承用锻造合金
| Plain bearings; copper alloys; part 2: wrought copper alloys for solid plain bearings
|
ISO 4383-2000
| 滑动轴承 薄壁滑动轴承用金属多层材料
| Plain bearings - Multilayer materials for thin-walled plain bearings
|
ISO 4384-1-2000
| 滑动轴承 轴承合金的硬度试验 第1部分:复合材料
| Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials
|
ISO 4384-2-1982
| 滑动轴承 轴承合金的硬度试验 第2部分:单层材料
| Plain bearings; Hardness testing of bearing metals; Part 2 : Solid materials
|
ISO 4385-1981
| 滑动轴承 金属轴承材料的抗压试验
| Plain bearings; Compression testing of metallic bearing materials
|
ISO 4386-1-1992
| 滑动轴承 多层金属滑动轴承 第1部分:结合强度超声波无损检验
| Plain bearings; metallic multilayer plain bearings; part 1: non-destructive ultrasonic testing of bond
|
ISO 4386-2-1982
| 滑动轴承 多层金属滑动轴承 第2部分:厚度大于或等于2mm的轴承金属层的结合强度破坏性试验
| Plain bearings; Metallic multilayer plain bearings; Part 2 : destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
|
ISO 4386-3-1992
| 滑动轴承 多层金属滑动轴承 第3部分:无损穿透检测
| Plain bearings; metallic multilayer plain bearings; part 3: non-destructive penetrant testing
|
ISO 464-1995
| 滚动轴承 带定位止动环的向心轴承 尺寸和公差
| Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances
|
ISO 492-2002
| 滚动轴承.径向轴承.公差
| Rolling bearings - Radial bearings - Tolerances
|
ISO 5593-1997
| 滚动轴承 词汇 三种语言版
| Rolling bearings - Vocabulary
|
ISO 5753-1991
| 滚动轴承 径向游隙
| Rolling bearings; radial internal clearance
|
ISO 582-1995
| 滚动轴承 倒角尺寸的最大值
| Rolling bearings - Chamfer dimensions - Maximum values
|
ISO 5949-1983
| 工具钢和轴承钢 用标准图谱法评定碳化物分布的显微照相法
| Tool steels and bearing steels; Micrographic method for assessing the distribution of carbides using reference photomicrographs
|
ISO 6279-2006
| 滑动轴承.固体轴承用铝合金
| Plain bearings - Aluminium alloys for solid bearings
|
ISO 6280-1981
| 滑动轴承 厚壁多层轴承轴瓦的技术要求
| Plain bearings; Requirements on backings for thick-walled multilayer bearings
|
ISO 6282-1983
| 滑动轴承 金属薄壁轴瓦 0.01极限值的测定
| Plain bearings; metallic thin-walled half bearings; determination of the sigma 0,01<(hoch)*>-limit
|
ISO 6524-1992
| 滑动轴承 薄壁轴瓦 周长检验
| Plain bearings; thin-walled half-bearings; checking of peripheral length
|
ISO 6525-1983
| 滑动轴承 带材环型止推垫圈 尺寸和公差
| Plain bearings; Ring type thrust washers made from strip; Dimensions and tolerances
|
ISO 6526-1983
| 滑动轴承 冲压双金属半圆止推垫圈 要素和公差
| Plain bearings; Pressed bimetallic half thrust washers; Features and tolerances
|
ISO 6691-2000
| 滑动轴承用热塑性聚合物 分类和名称
| Thermoplastic polymers for plain bearings - Classification and designation
|
ISO 6743-2-1981
| 润滑剂、工业润滑油和有关产品(L类) 分类 第2部分:F组(锭子轴承、轴承和离合器)
| Lubricants, industrial oils and related products (class L); Classification; Part 2 : Family F (Spindle bearings, bearings and associated clutches)
|
ISO 6811 Technical Corrigendum 1-1999
| 关节轴承 词汇 技术勘误1 三种语言版
| Spherical plain bearings - Vocabulary; Technical corrigendum 1
|
ISO 6811-1998
| 关节轴承 词汇 三种语言版
| Spherical plain bearings - Vocabulary
|
ISO 683-17-1999
| 热处理钢、合金钢和易切钢 第17部分:滚球和滚柱轴承钢
| Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels
|
ISO 7063-2003
| 滚动轴承.滚针轴承滚道滚针.边界尺寸和公差
| Rolling bearings - Needle roller bearing track rollers - Boundary dimensions and tolerances
|
ISO 7146-1993
| 滑动轴承 损坏和外观变化的原因、特征和术语
| Plain bearings; terms, characteristics and causes of damage and changes in appearance
|
ISO 7148-1-1999
| 滑动轴承 轴承材料摩擦特性试验 第1部分:轴承材料试验
| Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals
|
ISO 7148-2-1999
| 滑动轴承 轴承材料摩擦特性试验 第2部分:聚合物基体轴承材料试验
| Plain bearings - Testing of the tribological behaviour of bearing materials - Part 2: Testing of polymer-based bearing materials
|
ISO 76-2006
| 滚动轴承.静载荷额定值
| Rolling bearings - Static load ratings |
ISO 7902-1-1998
| 稳态条件下液压滑动轴承 圆柱形轴承 第1部分:计算程序
| Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 1: Calculation procedure
|
ISO 7902-2-1998
| 稳态条件下液压滑动轴承 圆柱形轴承 第2部分:计算程序用函数
| Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure
|
ISO 7902-3-1998
| 稳态条件下液压滑动轴承 圆柱形轴承 第3部分:可允许的运行参数值
| Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters
|
ISO 7904-1-1995
| 滑动轴承 符号 第1部分:基本符号
| Plain bearings - Symbols - Part 1: Basic symbols
|
ISO 7904-2-1995
| 滑动轴承 符号 第2部分:应用符号
| Plain bearings - Symbols - Part 2: Applications
|
ISO 7905-1-1995
| 滑动轴承 轴瓦疲劳强度 第1部分:在液体动压润滑条件下试验台和使用中的滑动轴承
| Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication
|
ISO 7905-2-1995
| 滑动轴承.轴承疲劳强度.第2部分:金属轴程材料的液体样品的试验
| Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material
|
ISO 7905-3-1995
| 滑动轴承.轴承疲劳强度.第3部分:金属多层轴承材料在滑动带上的试验
| Plain bearings - Bearing fatigue - Part 3: Test on plain strips of a metallic multilayer bearing material
|
ISO 7905-4-1995
| 滑动轴承.轴承疲劳强度.第3部分:多层金属滑动轴承材料的轴瓦试验
| Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material
|
ISO 7938-1986
| 航空器 操纵钢索系统滑轮用球轴承 尺寸和载荷
| Aircraft; Ball bearings for control cable pulleys; Dimensions and loads
|
ISO 7939-1988
| 航空器 操纵钢索系统用带有球轴承的非金属滑轮 尺寸和载荷
| Aircraft; non-metallic pulleys with ball bearings for control cables; dimensions and loads
|
ISO 8443-1999
| 滚动轴承 凸缘外圈向心球轴承 凸缘尺寸
| Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions
|
ISO 8826-1-1989
| 技术制图 滚动轴承 第1部分:通用简化画法
| Technical drawings; rolling bearings; part 1: general simplified representation
|
ISO 8826-2-1994
| 技术制图 滚动轴承 第2部分:详细简化画法
| Technical drawings - Rolling bearings - Part 2: Detailed simplified representation
|
ISO 9628-2006
| 滚动轴承.嵌入轴承和偏心锁紧轴承环.边界尺寸和公差
| Rolling bearings - Insert bearings and eccentric locking collars - Boundary dimensions and tolerances
|
ISO 9758-2000
| 航空航天 航空器操纵钢丝绳用滚动轴承用螺纹式钢制叉形端 尺寸及载荷
| Aerospace - Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads
|
ISO 9760-2000
| 航空航天 航空器滚动轴承操纵钢丝绳上的锻制耐腐蚀钢制叉形端 尺寸及载荷
| Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads
|
ISO/TR 6281-1990
| 滑动轴承 液体动压和混合润滑条件下的台架试验 准则
| Plain bearings; testing under conditions of hydrodynamic and mixed lubrication in test rigs; guidelines
|
ISO/TS 16799-1999
| 滚动轴承 额定动载荷和额定寿命 基本额定动载荷计算中的间断点
| Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings
|
编号 | 中文名称 | 英文名称 |