| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI/ASTM A801/A 801M-1999 | 铁钴高磁性饱和合金规范 | Specification for Iron-Cobalt High Magnetic Saturation Alloys |
| ANSI/ASTM B166-2001 | 镍铬铁合金(UNS N06600, N06601, and N06690)及镍铬钴钼合金(UNS N06617)条材、棒材及线材规范 | Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, and N06690) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire |
| ANSI/ASTM B168-2001 | 镍铬铁合金(UNS N06600, N06601 and N06690)及镍铬钴钼合金(UNS N06617)板、薄板和带材规范 | Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601 and N06690) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, And Strip |
| ANSI/ASTM B619-2000 | 焊接用镍和镍钴合金管规范 | Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
| ANSI/ASTM B622-2000 | 无缝镍和镍钴合金管规范 | Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube |
| ANSI/ASTM B626-2001 | 焊接镍和镍钴合金管规范 | Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ANSI/ASTM B639-1996 | 高温设备用沉积硬化含钴合金杆材、棒材、锻件和锻造坯料规范 | Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service |
| ANSI/ASTM B719-2000 | 镍铬钼钴钨铁硅合金(UNS N06333)棒材规范 | Specification for Nickel-Chromium-Molybdenum-Cobalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ANSI/ASTM B722-1995 | 镍铬钼钴钨铁硅合金(UNS N06333)无缝管规范 | Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube |
| ANSI/ASTM B726-1996 | 镍铬钼钴钨铁硅合金 (UNS N06333)焊管规范 | Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ANSI/ASTM B815-1996 | 钴铬镍钼钨合金杆规范 | Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ANSI/ASTM B818-1998 | 钴铬镍钼钨合金(UNS R31233)板,薄板和带材规范 | Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip |
| ANSI/ASTM B872-1996 | 沉淀硬化镍铁铬钴(Nb)钛铝合金(UNS N09908)板、薄板及带材规范 | Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (NB)-Titanium-Aluminum Alloy (UNS NO9908) Plate, Sheet and Strip |
| ANSI/ASTM B880-1998 | 镍、镍合金及钴合金化学检验分析限值一般要求规范 | Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys |
| ASTM A801-2004 | 锻造铁-钴高磁饱和合金的标准规范 | Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) |
| ASTM B441-2004 | 铜钴铍、铜镍铍和铜镍铅铍的杆材和棒材用标准规范(UNS Nos. C17500、C17510和C17465) | Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465) |
| ASTM B534-2007 | 铜-钴-铍合金及铜-镍-铍合金厚板材、薄板材、带材和轧制棒材的标准规范 | Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B546-2004 | 电熔焊接镍铬钴钼合金(UNS N06617)、镍铁铬硅合金(UNS N08330和UNS N08332)、镍铬铁铝合金(UNS N06603)、镍 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ASTM B592-2001(2006) | 铜锌铝钴合金、铜锌锡铁板、薄板、带材及轧制的棒材标准规范 | Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B619-2006 | 焊接的镍和镍钴合金管的标准规范 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
| ASTM B622-2006 | 无缝镍和镍钴合金管的标准规范 | Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube |
| ASTM B626-2006 | 焊接镍和镍钴合金管标准规范 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ASTM B718-2000(2006) | 镍铬钼钴钨铁硅合金板,薄板和带材的标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM B719-2000(2005) | 镍铬钼钴钨铁硅合金(UNS N06333)棒标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ASTM B722-2006 | 镍-铬-钼-钴-钨-铁硅合金(UNS N06333)无缝管道和管标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube |
| ASTM B723-2000(2005) | 镍铬钼钴钨铁硅合金焊接管的标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe |
| ASTM B726-2002(2006) | 镍铬钼钴钨铁硅合金(UNS N06333)焊接管的标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ASTM B768-1999(2004) | 铜钴铍合金和铜镍铍合金带材和板材标准规范 | Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet |
| ASTM B815-2002(2006) | 钴铬镍钼钨合金杆标准规范 | Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ASTM B840-1999(2004) | 锌钴合金沉积物用电解镀层标准规范 | Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits |
| ASTM D1686-1996(2004) | 熔融状态中固体芳烃与相关材料的颜色的标准试验方法(铂钴标度) | Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
| ASTM D2108-2005 | 卤化有机溶剂及其混合物颜色的标准试验方法(铂钴标度) | Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale) |
| ASTM D2129-2005 | 用铂钴色标标定透明电绝缘液体颜色的标准试验方法 | Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale) |
| ASTM D2373-2005 | 用EDTA法测定涂料干燥剂中钴的标准试验方法 | Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method |
| ASTM D3335-1985a(2005) | 原子吸收光谱法测定涂料中低浓度铅、镉和钴的标准试验方法 | Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy |
| ASTM D3366-1995(2003)e1 | 熔融状态下和加热后顺酐和苯酐颜色的试验方法(铂-钴比例) | Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) |
| ASTM D3610-2000(2004) | 电位滴定法测定氧化铝基钴-钼催化剂中总钴含量的标准试验方法 | Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
| ASTM E1250-1988(2005) | 硅电子器件辐射强度试验用钴60辐射源的低能γ成分评估的电离箱的应用的标准试验方法 | Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices |
| ASTM E1473-2003 | 镍、钴和耐高温合金化学分析用标准试验方法 | Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys |
| ASTM E159-2006 | 钴、铜、钨和铁粉末中氢的质量损耗用标准试验方法(氢损耗) | Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss) |
| ASTM E354-1993(2006) | 高温钢、电工钢、磁钢和其它类似的铁、镍和钴合金化学分析的标准试验方法 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E481-2003 | 用钴和银的放射性测定中子积分通量率的标准试验方法 | Standard Test Method for Measuring Neutron Fluence Rate by Radioactivation of Cobalt and Silver |
| ASTM E592-1999(2004) | 用X射线法做1/4 in至2 in(6-51mm)厚钢板的射线照相及用钴-60做1 in至6 in (25-152mm)厚钢板的射线照相以获 | Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. [6 to 51 mm] Thick with X Rays and 1 to 6 in. [25 to 152 mm] Thick with Cobalt-60 |
| ASTM F1466-1999(2005) | 金属与陶瓷密封用铁镍钴合金的标准规范 | Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications |
| ASTM F15-2004 | 铁-镍-钴密封合金的标准规范 | Standard Specification for Iron-Nickel-Cobalt Sealing Alloy |
| ASTM F1684-2006 | 低热膨胀用铁-镍和铁-镍-钴合金的标准规范 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM F2527-2005e1 | 外科植入物用锻造无缝和焊接及拉制的钴合金小直径管的标准规范（UNS R30003、 UNS R30008、 UNS R30035、 U | Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537) |
| ASTM F562-2007 | 外科植入用锻制35钴-35镍-20铬-10钼合金标准规范(UNS R30035) | Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
| ASTM F688-2005 | 外科植入物用锻制钴35镍20铬10钼合金板、薄板及箔标准规范 | Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
| ASTM F75-2007 | 外科植入术用钴28铬6钼铸件和铸造合金的标准规范 | Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
| ASTM F799-2006 | 外科移植物用钴28铬6钼合金锻件(UNS R31537、R31538、R31539)标准规范 | Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
| ASTM F90-2007 | 外科植入物用锻造钴-20铬-15钨-10镍合金的标准规范 | Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| ASTM G61-1986(2003)e1 | 铁镍钴基合金的局部腐蚀敏感性的循环动电势极化强度的试验方法 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| IEEE N 449.1-1978 | 钴60和铯137遥控仪器的定期检测程序 | (Procedures for periodic inspection of cobalt-60 and cesium-137 teletherapy equipment) |
| 编号 | 中文名称 | 英文名称 |