| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 2HC 204-1989 | 镍-钴-铬-铝-钛-钼合金铸件规范(镍基钴15.0、铬10.0、铝5.5、钛4.8、钼3.0) | Specification for nickel-cobalt-chromium-aluminium-titanium-molybdenum alloy castings (Nickel base Co 15.0, Cr 10.0, Al 5.5, Ti 4.8, Mo 3.0) |
| BS 2HC 207-1989 | 镍-钴-钨-铬-铝-钽-铪-钛合金铸件规范(镍基钴10.0、钨10.0、铬9.0、铝5.5、钽25、铪1.5、钛1.5) | Specification for nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5) |
| BS 2HC 208-1989 | 镍-钴-钨-铬-铝-钼-钛-钽合金铸件规范(镍基Co 10.0、W 10.0、Cr 9.0、Al 5.5、Mo 2.5、Ti 1.5、Ta 1.5) | Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantal um alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5) |
| BS 2HC 211-1989 | 镍-铬-钴-钼-铝钛合金铸件规范(镍基铬15.5、钴10.0、钼8.3、铝4.2、钛3.6) | Specification for nickel-chromium-cobalt-molybdenum-aluminium-titanium alloy castings (Nickel base Cr 15.5, Co 10.0, Mo 8,3, Al 4.2, Ti 3.6) |
| BS 2HR 202-1973 | 镍-铬-钴-钛耐热合金薄板材和带材(镍基、Cr19.5、Co18.0、Ti2.5、Al 1.5)规范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 501-1973 | 弹簧用冷拉固溶热处理的镍铬钴钛铝耐热合金线材(镍基、Cr19.5、Co18.0、Ti2.5、Al 1.5)规范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 502-1973 | 弹簧用冷拉和固溶热处理的镍铬钴钛铝耐热合金线材(镍基、Cr19.5、Co18.0、Ti2.5、Al 1.5)规范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution heat treated wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 503-1973 | 螺纹垫圈(直径0.45mm-2mm)用镍铬钴钛铝耐热合金线材(镍基、Cr19.5、Co18.0、Ti2.5、Al 1.5)规范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for thread inserts (0.45 mm to 2 mm diameter) (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 3146-2-1975 | 金属熔模铸造规范.第2部分:耐蚀耐热钢、镍和钴基合金 | Specification for investment castings in metal - Corrosion and heat resisting steels, nickel and cobalt base alloys |
| BS 3482-9-1991 | 干燥剂试验方法.第9部分:氯化钴含量测定 | Methods of test for desiccants - Determination of cobalt chloride content |
| BS 3523-1991 | 用氯化钴浸泡的粒状干燥剂硅胶规范 | Specification for granular desiccant silica gel impregnated with cobalt chloride |
| BS 3727-5-1964 | 电子管和电子阀用镍的分析方法.第5部分:钴含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method) |
| BS 5339-1976 | 液态化学制品颜色按黑曾(Hazen)单位(铂-钴度标)测量方法 | Method of measurement of colour in Hazen units (platinum-cobalt scale) of liquid chemical products |
| BS 6068-2.29-1987 | 水质.第2部分:物理、化学和生物化学方法.第29节:钴、镍、铜、锌、镉和铅含量测定:火焰原子吸收光谱法 | Water quality - Physical, chemical and biochemical methods - Determination of cobalt, nickel, copper, zinc, cadmium and lead: flame atomic absorption spectrometric methods |
| BS 6200-3.11.1-1991 | 铁、钢和其他铁合金的抽样和分析.分析方法.钴的测定.钢和铸铁:分光光度测定法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Steel and cast iron: spectrophotometric method |
| BS 6200-3.11.2-1991 | 铁、钢和其他铁金属的抽样和分析.分析方法.钴的测定.铁、钢和制钢材料:痕迹量的分光光度测定 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Steel, irons and steelmaking materials: spectrophotometric method for trace amounts |
| BS 6200-3.11.3-1997 | 铁、钢和其它黑色金属取样和分析.第3部分:分析方法.第11节:钴含量测定.第3小节:火焰原子吸收分光光度法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Flame atomic absorption spectrometric method |
| BS 6200-3.40.1-1997 | 钢、铁和其他黑色金属取样及分析.第3部分:分析方法.第40节:多元素法.电感耦合等离子体原子发射光谱分析法测 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Multi-element methods - Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method - General requirements and sample dissolution |
| BS 6200-3.40.2-1997 | 钢、铁和其他黑色金属取样及分析.第3部分:分析方法.第40节:多元素法.电感耦合等离子体原子发射光谱分析法测 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Multi-element methods - Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method - Determination of nickel content |
| BS 6200-3.40.3-1997 | 钢、铁和其他含铁金属取样及分析.第3部分:分析方法.第40节:多元素法.电感耦合等离子体原子发射光谱分析法测 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Multi-element methods - Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method - Determination of copper content |
| BS 6200-3.40.4-1997 | 钢、铁和其他含铁金属取样及分析.第3部分:分析方法.第40节:多元素法.电感耦合等离子体原子发射光谱分析法测 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Multi-element methods - Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method - Determination of cobalt content |
| BS 6783-1-1986 | 镍、镍铁和镍合金的取样与分析.采用火焰原子吸收光谱法对镍中银、铋、镉、钴、铜、铁、锰、铅和锌的测定方 | Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc in nickel by flame atomic absorption spectrometry |
| BS 6783-3-1986 | 镍、镍铁和镍合金的取样与分析.第3部分:采用火焰原子吸收光谱法镍铁中钴的测定方法 | Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of cobalt in ferronickel by flame atomic absorption spectrometry |
| BS 7252-12-1997 | 外科植物入用金属材料.第12部分:煅制钴-铬-钼合金规范 | Metallic materials for surgical implants - Specification for wrought cobalt-chromium-molybdenum alloy |
| BS 7252-4-1997 | 外科植入物用金属材料.第4部分:钴-铬-钼铸造合金规范 | Metallic materials for surgical implants - Specification for cobalt-chromium-molybdenum casting alloy |
| BS 7252-6-1997 | 外科植入物用金属材料.可锻钴-镍-铬-钼合金规范 | Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum alloy |
| BS 7252-7-1994 | 外科植入物用金属材料.第7部分:钴-铬-镍-钼-铁合金规范 | Metallic materials for surgical implants - Specification for cobalt-chromium-nickel-molybdenum-iron alloy |
| BS 7252-8-1997 | 外科植入物用金属材料.可锻钴-镍-铬-钼-钨-铁合金规范 | Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| BS 7254-5-1990 | 矫形外科植入物.第5部分:钴-铬-钼合金制铸件的生产规范 | Orthopaedic implants - Specification for production of castings made of cobalt-chromium-molybdenum alloy |
| BS 7317-1-1990 | 高纯度铜阴极Cu-CATH-1分析方法.第1部分:采用原子吸收分光光度法对镉、锰和银(铬,钴,铁,镍和锌的筛选程序) | Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of cadmium, manganese and silver (screening procedure for chromium, cobalt, iron, nickel and zinc) by atomic absorption spectrophotometry |
| BS 7317-2-1990 | 高纯度铜阴极Cu-CATH-1分析方法.第2部分:采用不连续体积喷雾原子吸收分光光度法对铬、钴、铁、镍和锌的测定 | Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of chromium, cobalt, iron, nickel and zinc by discrete volume nebulization atomic absorption spectrophotometry |
| BS 7455-2-1991 | 采用火焰原子吸收光谱测定法对镍合金的分析.钴的测定方法 | Analysis of nickel alloys by flame atomic absorption spectrometry - Method for the determination of cobalt |
| BS 7755-3.13-1998 | 土质.化学方法.土壤的王水萃取物中镉、铬、钴、铜、铅、锰、镍和锌含量测定.火焰和电热原子吸收光谱测定法 | Soil quality - Chemical methods - Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil - Flame and electrothermal atomic absorption spectrometric methods |
| BS DD CEN/TS 15621-2007 | 动物饲料.用电感耦合等离子体发射光谱法(ICP-AES)测定钙、钠、磷、镁、钾、硫、铁、锌、铜、猛、钴和钼含量 | Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES |
| BS EN 10302-2008 | 耐蠕变的钢、镍和钴合金 | Creep resisting steels, nickel and cobalt alloys |
| BS EN 14941-2006 | 铜和铜合金.测定钴含量.FAAS法 | Copper and copper alloys - Determination of cobalt content - FAAS method |
| BS EN 15510-2007 | 动物饲料.用电感耦合等离子体发射光谱法(ICP-AES)测定钙、钠、磷、镁、钾、铁、锌、铜、猛、钴、钼、砷、铅 | Animal feeding stuffs — Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES |
| BS EN 2103-1-1992 | 钢、镍基合金及钴基合金重熔坯料和铸件.技术规范.一般要求 | Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - General requirements |
| BS EN 2103-2-1992 | 钢、镍基合金及钴基合金重熔坯料和铸件.技术规范.重熔坯料 | Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Remelting stock |
| BS EN 2103-3-1992 | 钢、镍基合金及钴基合金重熔坯料和铸件.技术规范.试制铸件和产品铸件 | Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Pre-production and production castings |
| BS EN 23909-1994 | 硬质合金.钴含量测定.电位滴定法 | Hardmetals - Determination of cobalt - Potentiometric method |
| BS EN 27627-3-1993 | 硬质合金.用火焰原子吸收光谱法进行化学分析.0.01-0.5%(m/m)含量中钴、铁、锰和镍的测定 | Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) |
| BS EN 27627-5-1993 | 硬质合金.用火焰原子吸收光谱法进行化学分析.0.5-2%(m/m)含量中钴、铁、锰、钼、镍、钛和钒的测定 | Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) |
| BS EN 3959-2001 | 航空航天系列.钴基合金CO-B41601(CoCr19Ni17Si8W4).硬钎焊填充金属.粉末或糊料 | Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste |
| BS EN ISO 6271-1-2004 | 透明液体.用铂-钴色标评定色度.观测法 | Clear liquids - Estimation of colour by the platinum-cobalt scale - Visual method |
| BS EN ISO 6271-2-2004 | 透明液体.用铂-钴色标评定色度.光谱测定法 | Clear liquids - Estimation of colour by the platinum-cobalt scale - Spectrophotometric method |
| BS HC 100-1972 | 铁、镍、铜、钴和难熔金属基合金铸件的检验和试验程序 | Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings |
| BS HC 205-1974 | 沉淀硬化镍基铬-钴-钼-钛合金铸件规范(铬20、钴20、钼6、钛2 | Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2) |
| BS HC 206-1975 | 沉淀硬化镍基铬-钴-钼-钛合金精密铸件规范(铬20、钴20、钼6、钛2) | Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2) |
| BS HC 301-1973 | 钴基铬-镍-钨合金铸件规范(铬25.5、镍10.5、钨7.5) | Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5) |
| BS HR 10-1972 | 镍-钴-铬-钼-钛-铝耐合金坯锭、棒材、锻件和零件(镍基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)规范 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 204-1972 | 镍-铬-铁-钼-钴-钨耐热合金板材,薄板材和带材(镍基、Cr22、Fe18.5、Mo9、Co1.5、W0.6)规范 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS HR 206-1973 | 镍-钴-铬-钼-钛-铝耐热合金板材、薄板材和带材(镍基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)规范 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 209-1989 | 镍-铬-钴-钼-钛-铝耐热合金薄板材、带材和板材:软化的(镍基、Cr18、Co14、 Mo7、Ti2.2、Al2.1)规范 | Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1) |
| BS HR 240-1972 | 钴-铬-钨-镍-锰耐热合金厚板材、薄板材和带材(钴基、Cr20、W15、Ni10、Mn1.5)规范 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (cobalt base Cr 20, W 15, Ni 10, Mn 1.5) |
| BS HR 3-1972 | 镍-钴-铬-钼-钛-铝耐热合金坯锭、棒材、锻件和部件规范(镍基、Co20、Cr14.8、Mo05、Al4.7、Ti1.2) | Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14. 8, Mo 5, Al 4.7, Ti 1.2) |
| BS HR 4-1972 | 镍-铬-钴-铝-钼-钛耐热合金坯锭、棒材、锻件和部件规范(镍基Cr 15、Co 14.2、Al 5、Mo 4、Ti 4) | Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14. 2, Al 5, Mo 4, Ti 4) |
| BS HR 40-1972 | 钴-铬-钨-镍-锰耐合金坯锭、棒材、锻件和零件(镍基、Cr20、W15、Ni10、Mn1.5)规范 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base, Cr 20, W 15, Ni 10, Mn 1.5) |
| BS HR 402-1973 | 冷加工和软化的无缝镍铬钴钛铝耐热合金管(镍基、Cr19.5、Co18.0、Ti2.5、Al1.5)规范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS HR 404-1973 | 冷加工溶液处理的无缝镍钴铬钼钛铝耐热合金管(镍基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)规范 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy cold worked solution treated seamless tubes (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 506-1989 | 镍-铬-钴-钛-铝耐热合金线材:软化的(镍基、Cr19.5、Co1.8、Ti2.5、Al1.5)规范 | Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (Nickel base, Cr 19.5, Co 18, Ti 2.5, Al 1.5) |
| BS HR 6-1972 | 镍-铬-铁-钼-钴-钨耐合金坯锭、棒材、锻件和零件(镍基、Cr21.7、Fe18.5、Mo9、Co1.5、W0.6)规范 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS ISO 11533-1996 | 铁矿石.钴含量测定.火焰原子吸收光谱测定法 | Iron ores - Determination of cobalt content - Flame atomic absorption spectrometric method |
| BS ISO 11873-2005 | 硬质合金.钴金属粉末中硫和碳含量的测定.红外线探测法 | Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method |
| BS ISO 11877-2008 | 硬金属.钴金属合金粉末中硅的测定.光度测定法 | Hardmetals - Determination of silicon in cobalt metal powders - Photometric method |
| BS ISO 16468-2005 | 熔模铸件(钢、镍合金和钴合金).一般技术要求 | Investment castings (steel,nickel alloys and cobalt alloys) - General technical requirements |
| BS ISO 17352-2008 | 硬金属.使用石墨炉原子吸收法测定钴金属粉末中的硅 | Hardmetals - Determination of silicon in cobalt metal powders using graphite-furnace atomic absorption |
| BS ISO 19959-2005 | 熔模铸件表面情况的外观检验.钢、镍合金和钴合金 | Visual examination of the surface condition of investment castings - Steel, nickel alloys and cobalt alloys |
| BS ISO 23470-2007 | 土质.用三氯六氨基钴溶液测定有效阳离子交换能力(CEC)和可交换的阳离子 | Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution |
| BS L 119-1975 | 铝-铜(5.0)-镍(1.5)-锰(0.5)-钛(0.2)-锆(0.2)-钴(0.2)-锑(0.2)合金铸锭和铸件规范(溶液处理和人工时效) | Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2) |
| BS S 152-1975 | 铬-钴-钼-钒-铌耐热钢坯、棒材、锻件及零件规范(自耗电极重熔)(1000-1140MPa)(铬10.5、钴6、钼0.8、钒0.2、 | Specification for chromium-cobalt-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (consumable electrode remelted) (1000-1140 MPa) (Cr 10.5, Co 6, Mo 0.8, V 0.2, Nb 0.3) |
| BS S 162-1990 | 锻坯、锻件、棒材和零件用18%镍-钴-钼马氏体时效钢(1800MPa:双倍真空熔化)规范 | Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted) |
| DD CEN/TS 15621-2007 | 动物饲料.压力溶解后钙、钠、磷、镁、钾、硫、铁、锌、铜、锰、钴和钼元素的测定 | Animal feeding stuffs — Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES |
| 编号 | 中文名称 | 英文名称 |