德国准则标准(DIN code standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
DIN 18506-2002 液压道路粘结剂.组分、规范和符合性准则 Hydraulic road binders - Composition, specifications and conformity criteria
DIN 18910-1-2004 封闭厩的热绝缘.热绝缘和强制通风.第1部分:封闭通风厩的计划和设计的准则 Thermal insulation for closed livestock buildings - Thermal insulation and ventilation forced - Part 1: Principles for planning and design for closed ventilated livestock buildings
DIN 19704-1-1998 钢制液压结构件.第1部分:设计和计算准则 Hydraulic steel structures - Part 1: Criteria for design and calculation
DIN 25449-1987 核电站中钢筋混凝土构件承受因内部故障引起的负荷的设计准则 Design criteria for reinforced concrete subject to loadings as a result of internal incidents in nuclear power plants
DIN 29583-1987 航空航天.飞行器的丙烯酸塑料门窗玻璃的维护和修理.一般准则 Aerospace; maintenance and repairing of aircraft glazings of acrylic plastics; general directions
DIN 3771-4-1984 液压系统.O型密封圈.质量验收准则 Fluid systems; O-rings; quality acceptance criteria
DIN 5030-5-1987 发射光的光谱测量.发射光的光谱测量用物理探测器.术语、特性值、选择准则 Spectral measurement of radiation; physical detectors for spectral measurement of radiation; terminology, characteristic quantities, selection criteria
DIN 51002-1-2004 电感耦合等离子体质谱法.第1部分:准则和定义 Inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: Principles and definitions
DIN 53803-3-1984 抽样.按照两组完全相同排列准则交叉分类的抽样统计原理 Sampling; statistical principles of sampling with cross classification according to two equal-ranked criteria
DIN 53803-4-1984 抽样.按照两组不同分级准则交叉分类的抽样统计原理 Sampling; statistical principles of sampling with cross classification according to two hierarchical criteria
DIN 58959-13-1997 医用微生物学质量管理.第13部分:灵敏度检验对照菌株用有效物料极限值测定准则 Quality management in medical microbiology - Part 13: Criteria for determination of active substance breakpoint for control strains used in susceptibility testing
DIN 58985-2003 实验室医学.决策标记准则 Laboratory medicine - Decision-marking criteria
DIN CEN/TS 15331-2006 建筑物维修设备的设计、管理和控制准则.德文版本 CEN/TS 15331-2005 Criteria for design, management and control of maintenance services for buildings; German version CEN/TS 15331:2005
DIN EN 12266-1-2003 工业用阀门.阀门试验.第1部分:压力试验、试验程序和验收准则.强制性要求 Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2003
DIN EN 12440-2001 天然石料.命名准则 Natural stone - Denomination criteria; German version EN 12440:2000
DIN EN 1317-1-1998 道路限制系统.第1部分:术语和试验方法的通用准则 Road restraint systems - Part 1: Terminology and general criteria for test methods; German version EN 1317-1:1998
DIN EN 1317-2-2006 道路限制系统.第2部分:安全障壁的性能等级、冲撞验收试验准则和试验方法 Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers English version of DIN EN 1317-2:2006-08
DIN EN 13312-1-2001 生物技术.管路和仪器性能准则.第1部分:通用性能准则 Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria; German version EN 13312-1:2001
DIN EN 13312-2-2001 生物技术.管路和仪器性能准则.第2部分:转接 Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings; German version EN 13312-2:2001
DIN EN 13312-3-2001 生物技术.管路和仪器性能准则.第3部分:取样和接种设备 Biotechnology - Performance criteria for piping and instrumentation - Part 3: Sampling and inoculation devices; German version EN 13312-3:2001
DIN EN 13312-4-2001 生物技术.管路和仪器性能准则.第4部分:管件 Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes; German version EN 13312-4:2001
DIN EN 13312-5-2001 生物技术.管路和仪器性能准则.第5部分:阀门 Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves; German version EN 13312-5:2001
DIN EN 13804-2002 食品.痕量元素测定.实施准则、一般考虑和样品制备 Foodstuffs - Determination of trace elements - Performance criteria, general considerations and sample preparation; German version EN 13804:2002
DIN EN 14216-2004 水泥.超低热特种水泥的组分、规范和合格准则 Cement - Composition, specifications and conformity criteria for very low heat special cements; German version EN 14216:2004
DIN EN 1760-3 Berichtigung 1-2006 机器的安全性.压敏保护装置.第3部分:压敏减震器、压敏板、压敏线和类似设备的设计和试验的一般准则.对DIN E Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices; German version EN 1760-3:2004, Corrigenda to DIN EN 1760-3:2004-10; German version EN 1760-3:2004/AC:2006
DIN EN 1760-3-2004 机器的安全性.压敏保护装置.第3部分:压敏减震器、压敏板、压敏线和类似设备的设计和试验的一般准则 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices; German version EN 1760-3:2004
DIN EN 1825-1-2004 油脂分离器.第1部分:设计、性能和试验以及标记和质量控制的准则 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
DIN EN 1946-1-1999 建筑产品和建筑部件的热性能.热传导性能实验室评估专用准则.第1部分:通用准则 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria; German version EN 1946-1:1999
DIN EN 1946-2-1999 建筑产品和建筑部件热性能.热传导性能实验室评估专用准则.第2部分:平板仪法测量 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by the guarded hot plate method; German version EN 1946-2:1999
DIN EN 1946-3-1999 建筑产品和建筑部件热性能.热传导性能实验室评估专用准则.第3部分:热流测量平板仪法 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by the guarded heat flow meter method; German version EN 1946-3:1999
DIN EN 1946-4-2000 建筑产品和建筑部件的热性能.实验室评估热传导性能专用准则.第4部分:高温箱测量法 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods; German version EN 1946-4:2000
DIN EN 1946-5-2000 建筑产品和部件热性能.实验室评估热传导性能专用准则.第5部分:管试验测量法 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods; German version EN 1946-5:2000
DIN EN 459-1-2002 建筑石灰.第1部分:定义、规范和符合性准则 Building lime - Part 1: Definitions, specifications and conformity criteria; German version EN 459-1:2001
DIN EN 60383-1-1997 公称电压高于1000V的架空线路绝缘子.第1部分:交流系统用陶瓷或玻璃绝缘子的定义、试验方法和验收准则 Insulators for overhead lines with a nominal voltage above 1 kV - Part 1: Ceramic or glass insulator units for a.c. systems; definitions, test methods and acceptance criteria (IEC 60383-1:1993); German version EN 60383-1:1996
DIN EN 60383-2-1995 公称电压高于1000V的架空线路绝缘子.第2部分:交流电路系统绝缘子串和绝缘子装置.试验方法和验收准则 Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems; definitions, test methods and acceptance criteria (IEC 60383-2:1993); German version EN 60383-2:1995
DIN EN 61325-1996 额定电压1000V以上架空线绝缘子.直流系统陶瓷或玻璃绝缘子.定义、试验方法和验收准则 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria (IEC 61325:1995); German version EN 61325:1995
DIN EN 62217 Berichtigung 1-2007 标称电压大于1000V的室内外用聚合绝缘子.通用定义、试验方法和验收准则(IEC 62217-2005) Polymeric insulators for indoor and outdoor use with a nominal voltage ?1 000 V - General definitions, test methods and acceptance criteria (IEC?62217:2005); German version EN 62217:2006, Corrigenda to DIN EN 62217 (VDE 0441-1000):2006-11; German version CENELEC-Cor.:2006 to EN 62217:2006
DIN EN 62217-2006 标称电压大于1000V的室内外用聚合绝缘子.定义、试验方法和验收准则(IEC 62217:2005) Polymeric insulators for indoor and outdoor use with a nominal voltage > 1000 V - General definitions, test methods and acceptance criteria (IEC 62217:2005); German version EN 62217:2006
DIN EN 81-80-2004 电梯建造和安装的安全准则.现有电梯.第80部分:提高现有载人电梯和客货两用电梯安全性的规则 Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts; German version EN 81-80:2003
DIN EN ISO 10075-3-2004 与心理负荷有关的人类工效学原则.第3部分:心理负荷测量和评估方法的准则和要求 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload (ISO 10075-3:2004); German version EN ISO 10075-3:2004
DIN EN ISO 14111-2000 天然气.分析溯源性准则 Natural gas - Guidelines to traceability in analysis (ISO 14111:1997); German version EN ISO 14111:1999
DIN EN ISO/IEC 17020-2004 各类检查机构运行的一般准则 General criteria for the operation of various types of bodies performing inspection (ISO/IEC 17020:1998); German and English version EN ISO/IEC 17020:2004
DIN ISO 11217-1994 航空航天.液压系列流体污染物.取样点定位和取样准则 Aerospace; hydraulic system fluid contamination; location of sampling points and criteria for sampling; identical with ISO 11217:1993
DIN V 65900-17-2001 航空航天系列.O形环槽.O形环槽设计准则.基本计算 Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000)
DIN-Fachbericht 122-2002 国家应用文献(NAD).DIN V ENV 1993-3-2:2002的应用准则.欧洲法规3:钢结构的测量和设计.第3-2部分:铁塔,电杆 ()
DIN-Fachbericht 126-2002 国家应用文献(NAD).DIN V ENV 1993-6的应用准则.欧洲法规3:第6部分:起重机轨道 ()
DIN-Fachbericht 91-2000 国家应用文献(NAD).DIN V ENV 1991-2-2:1997的应用准则.欧洲法规1:支承结构规划的基础和对支承结构的作用. ()
DIN-Fachbericht 92-2000 国家应用文献(NAD).DIN V ENV 1992-1-2-1997的应用准则.欧洲法规2:钢筋混凝土支撑结构的计划.第1-2部分:通 ()
DIN-Fachbericht 93-2000 国家应用文献(NAD).DIN V ENV 1993-1-2-1997的使用准则.欧洲法规3:钢构件的测量和建造.第1-2部分:通则.火灾 ()
DIN-Fachbericht 94-2000 国家应用文献(NAD).DIN V ENV 1994-1-2-1997的应用准则.欧洲法规4:钢、混凝土组合支撑结构的测量和建造.第1 ()
DIN-Fachbericht 95-2000 国家应用文献(NAD).DIN V ENV 1995-1-2-1997的应用准则.欧洲法规5:木结构的测量和建造.第1-2部分:通则.火灾 ()
DIN-Fachbericht 96-2000 国家应用文献(NAD).DIN V ENV 1996-1-2-1997的应用准则.欧洲法规6:砌体结构的测量和建造.第1-2部分:通则.火 ()
编号 中文名称 英文名称

返回